sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs/stm3220g-eval/nsh2 converted to use the kconfig-frontends tools

Browse Source
This commit is contained in:
Gregory Nutt 2014-03-01 08:03:45 -06:00
parent 7d05ba1f33
commit 35992ecb37
4 changed files with 1028 additions and 876 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
ChangeLog
View File

@ -6698,3 +6698,6 @@
* configurations (2014-2-28).
* configs/stm3240g-eval/nsh2: Configuration converted to use the
kconfig-frontends tools (2014-3-1).
* configs/stm3220g-eval/nsh2: Configuration converted to use the
kconfig-frontends tools (2014-3-1).

54
configs/stm3220g-eval/README.txt
View File

@ -821,14 +821,23 @@ Where <subdir> is one of the following:
CONFIG_NSH_DRIPADDR=(192<<24|168<<16|13<<8|1) : Host IP address 192.168.8.1
NOTES:
1. This example assumes that a network is connected. During its
1. This configuration uses the mconf-based configuration tool. To
change this configurations using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. This example assumes that a network is connected. During its
initialization, it will try to negotiate the link speed. If you have
no network connected when you reset the board, there will be a long
delay (maybe 30 seconds?) before anything happens. That is the timeout
before the networking finally gives up and decides that no network is
available.
2. This example supports the ADC test (apps/examples/adc) but this must
3. This example supports the ADC test (apps/examples/adc) but this must
be manually enabled by selecting:
CONFIG_ADC=y : Enable the generic ADC infrastructure
@ -844,7 +853,7 @@ Where <subdir> is one of the following:
CONFIG_DEBUG_ANALOG
3. This example supports the PWM test (apps/examples/pwm) but this must
4. This example supports the PWM test (apps/examples/pwm) but this must
be manually enabled by selecting eeither
CONFIG_PWM=y : Enable the generic PWM infrastructure
@ -873,7 +882,7 @@ Where <subdir> is one of the following:
CONFIG_DEBUG_PWM
4. This example supports the CAN loopback test (apps/examples/can) but this
5. This example supports the CAN loopback test (apps/examples/can) but this
must be manually enabled by selecting:
CONFIG_CAN=y : Enable the generic CAN infrastructure
@ -888,14 +897,14 @@ Where <subdir> is one of the following:
CONFIG_DEBUG_CAN
CONFIG_CAN_REGDEBUG
5. This example can support an FTP client. In order to build in FTP client
6. This example can support an FTP client. In order to build in FTP client
support simply uncomment the following lines in the appconfig file (before
configuring) or in the apps/.config file (after configuring):
#CONFIGURED_APPS += netutils/ftpc
#CONFIGURED_APPS += examples/ftpc
6. This example can support an FTP server. In order to build in FTP server
7. This example can support an FTP server. In order to build in FTP server
support simply uncomment the following lines in the appconfig file (before
configuring) or in the apps/.config file (after configuring):
@ -906,7 +915,7 @@ Where <subdir> is one of the following:
CONFIG_DISABLE_POLL=n
7. This example supports the watchdog timer test (apps/examples/watchdog)
8. This example supports the watchdog timer test (apps/examples/watchdog)
but this must be manually enabled by selecting:
CONFIG_WATCHDOG=y : Enables watchdog timer driver support
@ -922,7 +931,7 @@ Where <subdir> is one of the following:
The IWDG timer has a range of about 35 seconds and should not be an issue.
7. Adding LCD and graphics support:
9. Adding LCD and graphics support:
appconfig (apps/.config): Enable the application configurations that you
want to use. Asexamples:
@ -938,7 +947,7 @@ Where <subdir> is one of the following:
CONFIG_NX=y : Enable graphics suppport
CONFIG_MM_REGIONS=2 : When FSMC is enabled, so is the on-board SRAM memory region
8. USB OTG FS Device or Host Support
10. USB OTG FS Device or Host Support
CONFIG_USBDEV - Enable USB device support, OR
CONFIG_USBHOST - Enable USB host support (but not both)
@ -951,17 +960,17 @@ Where <subdir> is one of the following:
CONFIG_NSH_ARCHINIT - Architecture specific USB initialization
is needed
9. This configuration requires that jumper JP22 be set to enable RS-232 operation.
11. This configuration requires that jumper JP22 be set to enable RS-232 operation.
nsh2:
-----
This is an alternaitve NSH configuration. One limitation of the STM3220G-EVAL
This is an alternative NSH configuration. One limitation of the STM3220G-EVAL
board is that you cannot have both a UART-based NSH console and SDIO support.
The nsh2 differs from the nsh configuration in the following ways:
-CONFIG_STM32_USART3=y : USART3 is disabled
+ CONFIG_STM32_USART3=n
+CONFIG_STM32_USART3=n
-CONFIG_STM32_SDIO=n : SDIO is enabled
+CONFIG_STM32_SDIO=y
@ -988,20 +997,29 @@ Where <subdir> is one of the following:
curious.
NOTES:
1. See the notes for the nsh configuration. Most also apply to the nsh2
1. This configuration uses the mconf-based configuration tool. To
change this configurations using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. See the notes for the nsh configuration. Most also apply to the nsh2
configuration.
2. RS-232 is disabled, but Telnet is still available for use as a console.
3. RS-232 is disabled, but Telnet is still available for use as a console.
Since RS-232 and SDIO use the same pins (one controlled by JP22), RS232
and SDIO cannot be used concurrently.
3. This configuration requires that jumper JP22 be set to enable SDIO
4. This configuration requires that jumper JP22 be set to enable SDIO
operation. To enable MicroSD Card, which shares same I/Os with RS-232,
JP22 is not fitted.
4. In order to use SDIO without overruns, DMA must be used.
5. In order to use SDIO without overruns, DMA must be used.
5. Another SDIO/DMA issue. This one is probably a software bug. This is
6. Another SDIO/DMA issue. This one is probably a software bug. This is
the bug as stated in the TODO list:
"If you use a large I/O buffer to access the file system, then the
@ -1012,7 +1030,7 @@ Where <subdir> is one of the following:
For this reason, CONFIG_MMCSD_MULTIBLOCK_DISABLE=y appears in the defconfig
file.
6. Another DMA-related concern. I see this statement in the reference
7. Another DMA-related concern. I see this statement in the reference
manual: "The burst configuration has to be selected in order to respect
the AHB protocol, where bursts must not cross the 1 KB address boundary
because the minimum address space that can be allocated to a single slave

102
configs/stm3220g-eval/nsh2/appconfig
View File

@ -1,102 +0,0 @@
############################################################################
# configs/stm3220g-eval/nsh2/appconfig
#
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Path to example in apps/examples containing the user_start entry point
CONFIGURED_APPS += examples/nsh
# The NSH application library
CONFIGURED_APPS += system/readline
CONFIGURED_APPS += nshlib
# Networking libraries.
# Uncomment netutils/ftpc to include an FTP client library
# Uncomment netutils/ftpd to include an FTP server library
ifeq ($(CONFIG_NET),y)
CONFIGURED_APPS += netutils/uiplib
CONFIGURED_APPS += netutils/resolv
CONFIGURED_APPS += netutils/webclient
CONFIGURED_APPS += netutils/tftpc
#CONFIGURED_APPS += netutils/ftpc
#CONFIGURED_APPS += netutils/ftpd
ifeq ($(CONFIG_NSH_TELNET),y)
CONFIGURED_APPS += netutils/telnetd
endif
endif
# Applications configured as an NX built-in commands
ifeq ($(CONFIG_ADC),y)
CONFIGURED_APPS += examples/adc
endif
ifeq ($(CONFIG_PWM),y)
CONFIGURED_APPS += examples/pwm
endif
ifeq ($(CONFIG_CAN),y)
CONFIGURED_APPS += examples/can
endif
ifeq ($(CONFIG_I2C),y)
CONFIGURED_APPS += system/i2c
endif
ifeq ($(CONFIG_WATCHDOG),y)
CONFIGURED_APPS += examples/watchdog
endif
ifeq ($(CONFIG_INPUT_STMPE811),y)
CONFIGURED_APPS += examples/touchscreen
endif
# Uncomment examples/ftpc to include the FTP client example
# Uncomment examples/ftpd to include the FTP daemon example
ifeq ($(CONFIG_NET),y)
#CONFIGURED_APPS += examples/ftpc
#CONFIGURED_APPS += examples/ftpd
endif
# Uncomment to select a graphics example
ifeq ($(CONFIG_NX),y)
#CONFIGURED_APPS += examples/nx
#CONFIGURED_APPS += examples/nxhello
#CONFIGURED_APPS += examples/nximage
#CONFIGURED_APPS += examples/nxlines
endif

1745
configs/stm3220g-eval/nsh2/defconfig
View File

File diff suppressed because it is too large Load Diff