sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

ViewTool STM32F107: Basic NSH checks out okay

Browse Source
This commit is contained in:
Gregory Nutt 2013-12-01 10:05:40 -06:00
parent c777f90b8a
commit 360a451268
3 changed files with 44 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/src/stm32/chip/stm32f107vc_pinmap.h
View File

@ -358,8 +358,8 @@
#define GPIO_USART1_RTS (GPIO_ALT|GPIO_CNF_AFPP|GPIO_MODE_50MHz|GPIO_PORTA|GPIO_PIN12)
#define GPIO_USART1_CK (GPIO_ALT|GPIO_CNF_AFPP|GPIO_MODE_50MHz|GPIO_PORTA|GPIO_PIN8)
#if defined(CONFIG_STM32_USART1_REMAP)
# define GPIO_USART1_TX (GPIO_ALT|GPIO_CNF_AFPP|GPIO_MODE_50MHz|GPIO_PORTA|GPIO_PIN9)
# define GPIO_USART1_RX (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN10)
# define GPIO_USART1_TX (GPIO_ALT|GPIO_CNF_AFPP|GPIO_MODE_50MHz|GPIO_PORTB|GPIO_PIN6)
# define GPIO_USART1_RX (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTB|GPIO_PIN7)
#else
# define GPIO_USART1_TX (GPIO_ALT|GPIO_CNF_AFPP|GPIO_MODE_50MHz|GPIO_PORTA|GPIO_PIN9)
# define GPIO_USART1_RX (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTA|GPIO_PIN10)

52
configs/viewtool-stm32f107/README.txt
View File

@ -21,11 +21,15 @@ Contents
o User and Wake-Up keys
o LEDs
o Serial Console
- Console Configuration
- J5 - USART1
- PL-2013 USB-to-Serial Intface
- RS-232 Module
o Toolchains
- NOTE about Windows native toolchains
o Configurations
- Information Common to All Configurations
- Configuration sub-directories
- Configuration Sub-directories
User and Wake-Up keys
=====================
@ -73,20 +77,46 @@ LEDs
Serial Console
==============
Console Configuration
---------------------
The NuttX console is configurated by default on USART1 at 115200 BAUD 8N1
(8-bits, not parity, one stop bit). These setting can, of course, easily
be changed by reconfiguring NuttX.
J5 - USART1
-----------
The boards come with a PL-2303 based USB-to-serial board. Also available
as an option is an RS-232 board. Both have the same pin out on a 6-pin
connector that mates with the upper row of J5.
PIN MODULE BOARD J5
--- ------ ---------------------------
1 5V 1 POWER Power jumper
2 GND 3 GND Ground
3 TXD 5 RXD1 PA10 USART1_RXD
4 RXD 7 TXD1 PA9 USART1_TXD
5 RTS? 9 CTS? PA12 USART1_RTS
6 CTS? 11 RTS? PA11 USART1_CTS
PIN MODULE BOARD J5
--- ------ ---------------------------
1 5V 1 POWER Power jumper
2 GND 3 GND Ground
3 TXD 5 RXD1 PA10 USART1_RXD
4 RXD 7 TXD1 PA9 USART1_TXD
5 RTS? 9 CTS? PA12 USART1_RTS
6 CTS? 11 RTS? PA11 USART1_CTS
Note: This requires USART1 pin remapping
PL-2013 USB-to-Serial Intface
-----------------------------
J37 - CON4. Jumper Settings:
1 <-> 3 : Connects PA9 to the RXD1 output pin
2 <-> 4 : Connects PA10 to the TXD1 input pin
J35 - CON2. Jumper Setting:
Open. the PL2303 adapter receives its power from the USB host.
RS-232 Module
-------------
J37 - CON4. Jumper Settings:
1 <-> 3 : Connects PA9 to the RXD1 output pin
2 <-> 4 : Connects PA10 to the TXD1 input pin
J35 - CON2. Jumper Setting:
1 <-> 2 : Proves 3.3V to the RS-232 module.
Toolchains
==========
@ -182,7 +212,7 @@ Configurations
See also the "NOTE about Windows native toolchains" in the section call
"GNU Toolchain Options" above.
Configuration sub-directories
Configuration Sub-directories
-----------------------------
nsh:

2
configs/viewtool-stm32f107/nsh/defconfig
View File

@ -246,7 +246,7 @@ CONFIG_STM32_USART1=y
#
# Alternate Pin Mapping
#
CONFIG_STM32_USART1_REMAP=y
# CONFIG_STM32_USART1_REMAP is not set
# CONFIG_STM32_JTAG_DISABLE is not set
CONFIG_STM32_JTAG_FULL_ENABLE=y
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set