Add EFM32 configuration header file

This commit is contained in:
Gregory Nutt 2014-10-18 16:15:53 -06:00
parent 5ffef498c6
commit 377c06c0ff

View File

@ -0,0 +1,158 @@
/************************************************************************************
* arch/arm/src/efm32/efm32_config.h
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_EFM32_EFM32_CONFIG_H
#define __ARCH_ARM_SRC_EFM32_EFM32_CONFIG_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration *******************************************************************/
/* Make sure that the configuration does not enable UARTs that the MCU does not
* have
*/
#ifndef CONFIG_EFM32_HAVE_USART2
# undef CONFIG_EFM32_USART2
#endif
#ifndef CONFIG_EFM32_HAVE_UART0
# undef CONFIG_EFM32_UART0
#endif
#ifndef CONFIG_EFM32_HAVE_UART1
# undef CONFIG_EFM32_UART1
#endif
#ifndef CONFIG_EFM32_HAVE_LEUART1
# undef CONFIG_EFM32_LEUART1
#endif
#ifndef CONFIG_EFM32_UART
# undef CONFIG_EFM32_USART0
# undef CONFIG_EFM32_USART1
# undef CONFIG_EFM32_USART2
# undef CONFIG_EFM32_UART0
# undef CONFIG_EFM32_UART1
# undef CONFIG_EFM32_LEUART0
# undef CONFIG_EFM32_LEUART1
#endif
/* Is there a UART device? (excluding low energy UARTs) */
#undef HAVE_UART_DEVICE
#if defined(CONFIG_EFM32_USART0) || defined(CONFIG_EFM32_USART1) || \
defined(CONFIG_EFM32_USART2) || defined(CONFIG_EFM32_UART0) || \
defined(CONFIG_EFM32_UART1)
# define HAVE_UART_DEVICE 1
#endif
/* Is there a serial console? (Low energy UARTs not yet supported) */
#if defined(CONFIG_USART0_SERIAL_CONSOLE) && defined(CONFIG_EFM32_USART0)
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_USART1_SERIAL_CONSOLE) && defined(CONFIG_EFM32_USART1)
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_USART2_SERIAL_CONSOLE) && defined(CONFIG_EFM32_USART2)
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART0_SERIAL_CONSOLE) && defined(CONFIG_EFM32_UART0)
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#elif defined(CONFIG_UART1_SERIAL_CONSOLE) && defined(CONFIG_EFM32_UART1)
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# define HAVE_SERIAL_CONSOLE 1
#else
# warning "No valid CONFIG_U[S]ART[n]_SERIAL_CONSOLE Setting"
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef HAVE_SERIAL_CONSOLE
#endif
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Inline Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Data
************************************************************************************/
#if defined(__cplusplus)
extern "C"
{
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_EFM32_EFM32_CONFIG_H */