sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

drivers/timers/pcf85263.c: Add a driver for the NXP PCF85263 I2C RTC

Browse Source
This commit is contained in:
Gregory Nutt 2015-11-20 17:36:10 -06:00
parent 3cff8a725b
commit 38c9d42e21
7 changed files with 655 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
ChangeLog
View File

@ -11129,4 +11129,7 @@
(2015-11-19). (2015-11-19).
* drivers/mtd/w25.c: Add support for byte write mode. From Ken Peit * drivers/mtd/w25.c: Add support for byte write mode. From Ken Peit
(2015-11-20). (2015-11-20).
* drivers/timers/pcf85263.c and include/nuttx/times/pcf85263.h: Add
a driver for the NXP PCF85263 I2C RTC. Untested on initial commit
(2015-11-20).

21
drivers/timers/Kconfig
View File

@ -181,9 +181,28 @@ endchoice # Maxim Integrated RTC
config DS3231_I2C_FREQUENCY config DS3231_I2C_FREQUENCY
int "DS1307/DS323x I2C frequency" int "DS1307/DS323x I2C frequency"
default 400000 default 400000
range 1 4000000 range 1 400000
endif # RTC_DSXXXX endif # RTC_DSXXXX
config RTC_PCF85263
bool "PCF85263 RTC Driver"
default n
select I2C
select I2C_TRANSFER
select RTC_EXTERNAL
select RTC_DATETIME
---help---
Enables support for the Maxim Integrated DS3231 I2C RTC timer.
if RTC_PCF85263
config PCF85263_I2C_FREQUENCY
int "PCF85263 I2C frequency"
default 400000
range 1 400000
endif # RTC_PCF85263
endif # RTC endif # RTC
menuconfig WATCHDOG menuconfig WATCHDOG

6
drivers/timers/Make.defs
View File

@ -57,6 +57,12 @@ ifeq ($(CONFIG_RTC_DSXXXX),y)
TMRVPATH = :timers TMRVPATH = :timers
endif endif
ifeq ($(CONFIG_RTC_PCF85263),y)
CSRCS += pcf85263.c
TMRDEPPATH = --dep-path timers
TMRVPATH = :timers
endif
ifeq ($(CONFIG_RTC_DRIVER),y) ifeq ($(CONFIG_RTC_DRIVER),y)
CSRCS += rtc.c CSRCS += rtc.c
TMRDEPPATH = --dep-path timers TMRDEPPATH = --dep-path timers

6
drivers/timers/ds3231.c
View File

@ -463,7 +463,7 @@ int up_rtc_settime(FAR const struct timespec *tp)
return -EINVAL; return -EINVAL;
} }
#endif #endif
rtc_dumptime(&tm, "New time"); rtc_dumptime(&tm, "New time");
/* Construct the message */ /* Construct the message */
@ -479,7 +479,7 @@ int up_rtc_settime(FAR const struct timespec *tp)
buffer[2] = rtc_bin2bcd(newtm.tm_min); buffer[2] = rtc_bin2bcd(newtm.tm_min);
/* Save hour (0-23) with 24-hour time indicatin */ /* Save hour (0-23) with 24-hour time indication */
buffer[3] = rtc_bin2bcd(newtm.tm_hour) | DSXXXX_TIME_24; buffer[3] = rtc_bin2bcd(newtm.tm_hour) | DSXXXX_TIME_24;
@ -491,7 +491,7 @@ int up_rtc_settime(FAR const struct timespec *tp)
buffer[4] = 1; buffer[4] = 1;
#endif #endif
/* Save the day of the week (1-31) */ /* Save the day of the month (1-31) */
buffer[5] = rtc_bin2bcd(newtm.tm_mday); buffer[5] = rtc_bin2bcd(newtm.tm_mday);

531
drivers/timers/pcf85263.c Normal file
View File

@ -0,0 +1,531 @@
/************************************************************************************
* drivers/timers/pcf85263.c
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <time.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/arch.h>
#include <nuttx/i2c.h>
#include <nuttx/timers/pcf85263.h>
#include "pcf85263.h"
#ifdef CONFIG_RTC_PCF85263
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
/* This RTC implementation supports only date/time RTC hardware */
#ifndef CONFIG_RTC_DATETIME
# error CONFIG_RTC_DATETIME must be set to use this driver
#endif
#ifdef CONFIG_RTC_HIRES
# error CONFIG_RTC_HIRES must NOT be set with this driver
#endif
#ifndef CONFIG_I2C_TRANSFER
# error CONFIG_I2C_TRANSFER is required by this driver
#endif
#ifndef CONFIG_PCF85263_I2C_FREQUENCY
# error CONFIG_PCF85263_I2C_FREQUENCY is not configured
# define CONFIG_PCF85263_I2C_FREQUENCY 400000
#endif
#if CONFIG_PCF85263_I2C_FREQUENCY > 400000
# error CONFIG_PCF85263_I2C_FREQUENCY is out of range
#endif
#define PCF85263_I2C_ADDRESS 0x68
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_RTC
#endif
/* Debug ****************************************************************************/
#ifdef CONFIG_DEBUG_RTC
# define rtcdbg dbg
# define rtcvdbg vdbg
# define rtclldbg lldbg
# define rtcllvdbg llvdbg
#else
# define rtcdbg(x...)
# define rtcvdbg(x...)
# define rtclldbg(x...)
# define rtcllvdbg(x...)
#endif
/************************************************************************************
* Priviate Types
************************************************************************************/
/* This structure describes the state of the PCF85263 chip. Only a single RTC is
* supported.
*/
struct pcf85263_dev_s
{
FAR struct i2c_dev_s *i2c; /* Contained reference to the I2C bus driver */
};
/************************************************************************************
* Public Data
************************************************************************************/
/* g_rtc_enabled is set true after the RTC has successfully initialized */
volatile bool g_rtc_enabled = false;
/************************************************************************************
* Private Data
************************************************************************************/
/* The state of the PCF85263 chip. Only a single RTC is supported */
static struct pcf85263_dev_s g_pcf85263;
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Name: rtc_dumptime
*
* Description:
* Show the broken out time.
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
************************************************************************************/
#ifdef CONFIG_DEBUG_RTC
static void rtc_dumptime(FAR struct tm *tp, FAR const char *msg)
{
rtclldbg("%s:\n", msg);
rtclldbg(" tm_sec: %08x\n", tp->tm_sec);
rtclldbg(" tm_min: %08x\n", tp->tm_min);
rtclldbg(" tm_hour: %08x\n", tp->tm_hour);
rtclldbg(" tm_mday: %08x\n", tp->tm_mday);
rtclldbg(" tm_mon: %08x\n", tp->tm_mon);
rtclldbg(" tm_year: %08x\n", tp->tm_year);
#if defined(CONFIG_LIBC_LOCALTIME) || defined(CONFIG_TIME_EXTENDED)
rtclldbg(" tm_wday: %08x\n", tp->tm_wday);
rtclldbg(" tm_yday: %08x\n", tp->tm_yday);
rtclldbg(" tm_isdst: %08x\n", tp->tm_isdst);
#endif
}
#else
# define rtc_dumptime(tp, msg)
#endif
/************************************************************************************
* Name: rtc_bin2bcd
*
* Description:
* Converts a 2 digit binary to BCD format
*
* Input Parameters:
* value - The byte to be converted.
*
* Returned Value:
* The value in BCD representation
*
************************************************************************************/
static uint8_t rtc_bin2bcd(int value)
{
uint8_t msbcd = 0;
while (value >= 10)
{
msbcd++;
value -= 10;
}
return (msbcd << 4) | value;
}
/************************************************************************************
* Name: rtc_bcd2bin
*
* Description:
* Convert from 2 digit BCD to binary.
*
* Input Parameters:
* value - The BCD value to be converted.
*
* Returned Value:
* The value in binary representation
*
************************************************************************************/
static int rtc_bcd2bin(uint8_t value)
{
int tens = ((int)value >> 4) * 10;
return tens + (value & 0x0f);
}
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: pcf85263_rtc_initialize
*
* Description:
* Initialize the hardware RTC per the selected configuration. This function is
* called once during the OS initialization sequence by board-specific logic.
*
* After pcf85263_rtc_initialize() is called, the OS function clock_synchronize()
* should also be called to synchronize the system timer to a hardware RTC. That
* operation is normally performed automatically by the system during clock
* initialization. However, when an external RTC is used, the board logic will
* need to explicitly re-synchronize the system timer to the RTC when the RTC
* becomes available.
*
* Input Parameters:
* None
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
************************************************************************************/
int pcf85263_rtc_initialize(FAR struct i2c_dev_s *i2c)
{
/* Remember the i2c device and claim that the RTC is enabled */
g_pcf85263.i2c = i2c;
g_rtc_enabled = true;
return OK;
}
/************************************************************************************
* Name: up_rtc_getdatetime
*
* Description:
* Get the current date and time from the date/time RTC. This interface
* is only supported by the date/time RTC hardware implementation.
* It is used to replace the system timer. It is only used by the RTOS during
* initialization to set up the system time when CONFIG_RTC and CONFIG_RTC_DATETIME
* are selected (and CONFIG_RTC_HIRES is not).
*
* NOTE: Some date/time RTC hardware is capability of sub-second accuracy. That
* sub-second accuracy is lost in this interface. However, since the system time
* is reinitialized on each power-up/reset, there will be no timing inaccuracy in
* the long run.
*
* Input Parameters:
* tp - The location to return the high resolution time value.
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
************************************************************************************/
int up_rtc_getdatetime(FAR struct tm *tp)
{
struct i2c_msg_s msg[4];
uint8_t secaddr;
uint8_t buffer[7];
uint8_t seconds;
int ret;
/* If this function is called before the RTC has been initialized (and it will be),
* then just return the data/time of the epoch, 12:00 am, Jan 1, 1970.
*/
if (!g_rtc_enabled)
{
tp->tm_sec = 0;
tp->tm_min = 0;
tp->tm_hour = 0;
#if defined(CONFIG_LIBC_LOCALTIME) || defined(CONFIG_TIME_EXTENDED)
/* Jan 1, 1970 was a Thursday */
tp->tm_wday = 4;
#endif
tp->tm_mday = 1;
tp->tm_mon = 0;
tp->tm_year = 70;
return -EAGAIN;
}
/* Select to begin reading at the seconds register */
secaddr = PCF85263_RTC_SECONDS;
msg[0].addr = PCF85263_I2C_ADDRESS;
msg[0].flags = 0;
msg[0].buffer = &secaddr;
msg[0].length = 1;
/* Set up to read 7 registers: secondss, minutes, hour, day-of-week, date,
* month, year
*/
msg[1].addr = PCF85263_I2C_ADDRESS;
msg[1].flags = I2C_M_READ;
msg[1].buffer = buffer;
msg[1].length = 7;
/* Read the seconds register again */
msg[2].addr = PCF85263_I2C_ADDRESS;
msg[2].flags = 0;
msg[2].buffer = &secaddr;
msg[2].length = 1;
msg[3].addr = PCF85263_I2C_ADDRESS;
msg[3].flags = I2C_M_READ;
msg[3].buffer = &seconds;
msg[3].length = 1;
/* Configure I2C before using it */
I2C_SETFREQUENCY(g_pcf85263.i2c, CONFIG_PCF85263_I2C_FREQUENCY);
/* Perform the transfer (This could be done with I2C_WRITEREAD()). The
* transfer may be performed repeatedly of the seconds values decreases,
* meaning that that was a rollover in the seconds.
*/
do
{
ret = I2C_TRANSFER(g_pcf85263.i2c, msg, 4);
if (ret < 0)
{
rtcdbg("ERROR: I2C_TRANSFER failed: %d\n", ret)
return ret;
}
}
while ((buffer[0] & PCF85263_RTC_SECONDS_MASK) >
(seconds & PCF85263_RTC_SECONDS_MASK));
/* Format the return time */
/* Return seconds (0-61) */
tp->tm_sec = rtc_bcd2bin(buffer[0] & PCF85263_RTC_SECONDS_MASK);
/* Return minutes (0-59) */
tp->tm_min = rtc_bcd2bin(buffer[1] & PCF85263_RTC_MINUTES_MASK);
/* Return hour (0-23). This assumes 24-hour time was set. */
tp->tm_hour = rtc_bcd2bin(buffer[2] & PCF85263_RTC_HOURS24_MASK);
/* Return the day of the month (1-31) */
tp->tm_mday = rtc_bcd2bin(buffer[3] & PCF85263_RTC_DAYS_MASK);
#if defined(CONFIG_LIBC_LOCALTIME) || defined(CONFIG_TIME_EXTENDED)
/* Return the day of the week (0-6) */
tp->tm_wday = (rtc_bcd2bin(buffer[4]) & PCF85263_RTC_WEEKDAYS_MASK);
#endif
/* Return the month (0-11) */
tp->tm_mon = rtc_bcd2bin(buffer[5] & PCF85263_RTC_MONTHS_MASK) - 1;
/* Return the years since 1900. The RTC will hold years since 1968 (a leap year
* like 2000).
*/
tp->tm_year = rtc_bcd2bin(buffer[6]) + 68;
rtc_dumptime(tp, "Returning");
return OK;
}
/************************************************************************************
* Name: up_rtc_settime
*
* Description:
* Set the RTC to the provided time. All RTC implementations must be able to
* set their time based on a standard timespec.
*
* Input Parameters:
* tp - the time to use
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
************************************************************************************/
int up_rtc_settime(FAR const struct timespec *tp)
{
struct i2c_msg_s msg[3];
struct tm newtm;
time_t newtime;
uint8_t buffer[8];
uint8_t seconds;
int ret;
/* If this function is called before the RTC has been initialized then just return
* an error.
*/
if (!g_rtc_enabled)
{
return -EAGAIN;
}
rtc_dumptime(tp, "Setting time");
/* Get the broken out time */
newtime = (time_t)tp->tv_sec;
if (tp->tv_nsec >= 500000000)
{
/* Round up */
newtime++;
}
#ifdef CONFIG_LIBC_LOCALTIME
if (localtime_r(&newtime, &newtm) == NULL)
{
rtcdbg("ERROR: localtime_r failed\n")
return -EINVAL;
}
#else
if (gmtime_r(&newtime, &newtm) == NULL)
{
rtcdbg("ERROR: gmtime_r failed\n")
return -EINVAL;
}
#endif
rtc_dumptime(&tm, "New time");
/* Construct the message */
/* Write starting with the seconds regiser */
buffer[0] = PCF85263_RTC_SECONDS;
/* Save seconds (0-59) converted to BCD */
buffer[1] = rtc_bin2bcd(newtm.tm_sec);
/* Save minutes (0-59) converted to BCD */
buffer[2] = rtc_bin2bcd(newtm.tm_min);
/* Save hour (0-23) with 24-hour time indication */
buffer[3] = rtc_bin2bcd(newtm.tm_hour);
/* Save the day of the month (1-31) */
buffer[4] = rtc_bin2bcd(newtm.tm_mday);
/* Save the day of the week (1-7) */
#if defined(CONFIG_LIBC_LOCALTIME) || defined(CONFIG_TIME_EXTENDED)
buffer[5] = rtc_bin2bcd(newtm.tm_wday);
#else
buffer[5] = 0;
#endif
/* Save the month (1-12) */
buffer[6] = rtc_bin2bcd(newtm.tm_mon + 1);
/* Save the year. Use years since 1968 (a leap year like 2000) */
buffer[7] = rtc_bin2bcd(newtm.tm_year - 68);
/* Setup the I2C message */
msg[0].addr = PCF85263_I2C_ADDRESS;
msg[0].flags = 0;
msg[0].buffer = buffer;
msg[0].length = 8;
/* Read back the seconds register */
msg[1].addr = PCF85263_I2C_ADDRESS;
msg[1].flags = 0;
msg[1].buffer = buffer;
msg[1].length = 1;
msg[2].addr = PCF85263_I2C_ADDRESS;
msg[2].flags = I2C_M_READ;
msg[2].buffer = &seconds;
msg[2].length = 1;
/* Configure I2C before using it */
I2C_SETFREQUENCY(g_pcf85263.i2c, CONFIG_PCF85263_I2C_FREQUENCY);
/* Perform the transfer (This could be done with I2C_READ). This transfer
* will be repeated if the seconds count rolls over to a smaller value
* while writing.
*/
do
{
ret = I2C_TRANSFER(g_pcf85263.i2c, msg, 3);
if (ret < 0)
{
rtcdbg("ERROR: I2C_TRANSFER failed: %d\n", ret)
return ret;
}
}
while ((buffer[1] & PCF85263_RTC_SECONDS_MASK) >
(seconds & PCF85263_RTC_SECONDS_MASK));
return OK;
}
#endif /* CONFIG_RTC_PCF85263 */

4
drivers/timers/pcf85263.h
View File

@ -357,7 +357,7 @@
# define PCF85263_CTL_OSC_CLKIV (1 << 7) /* Bit 7: Output clock inversion */ # define PCF85263_CTL_OSC_CLKIV (1 << 7) /* Bit 7: Output clock inversion */
#define PCF85263_CTL_BATTERY_SWITCH 0x26 /* Battery switch control register */ #define PCF85263_CTL_BATTERY_SWITCH 0x26 /* Battery switch control register */
# define PCF85263_CTL_BATTERY_BSTH (1 << 0) /* Bit 0: # define PCF85263_CTL_BATTERY_BSTH (1 << 0) /* Bit 0: Threshold voltage control */
# define PCF85263_CTL_BATTERY_BSM_SHIFT (1) /* Bits 1-2: Battery switch mode bits */ # define PCF85263_CTL_BATTERY_BSM_SHIFT (1) /* Bits 1-2: Battery switch mode bits */
# define PCF85263_CTL_BATTERY_BSM_MASK (3 << PCF85263_CTL_BATTERY_BSM_SHIFT) # define PCF85263_CTL_BATTERY_BSM_MASK (3 << PCF85263_CTL_BATTERY_BSM_SHIFT)
# define PCF85263_CTL_BATTERY_BSM_VTH (0 << PCF85263_CTL_BATTERY_BSM_SHIFT) /* Switching at the Vth level */ # define PCF85263_CTL_BATTERY_BSM_VTH (0 << PCF85263_CTL_BATTERY_BSM_SHIFT) /* Switching at the Vth level */
@ -453,7 +453,7 @@
# define PCF85263_CTL_WDR_SHIFT (2) /* Bits 2-6: Watchdog register bits */ # define PCF85263_CTL_WDR_SHIFT (2) /* Bits 2-6: Watchdog register bits */
# define PCF85263_CTL_WDR_MASK (31 << PCF85263_CTL_WDR_SHIFT) # define PCF85263_CTL_WDR_MASK (31 << PCF85263_CTL_WDR_SHIFT)
# define PCF85263_CTL_WDR(n) ((uint9_t)(n) << PCF85263_CTL_WDR_SHIFT) # define PCF85263_CTL_WDR(n) ((uint9_t)(n) << PCF85263_CTL_WDR_SHIFT)
# define PCF85263_CTL_WDM (1 << 7) /* Bit 7: Watchdog mode # define PCF85263_CTL_WDM (1 << 7) /* Bit 7: Watchdog mode */
/* Stop */ /* Stop */

90
include/nuttx/timers/pcf85263.h Normal file
View File

@ -0,0 +1,90 @@
/****************************************************************************
* include/nuttx/timers/pcf85263.h
*
* Copyright (C) 2015 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __INCLUDE_NUTTX_TIMERS_PCF85263_H
#define __INCLUDE_NUTTX_TIMERS_PCF85263_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#ifdef CONFIG_RTC_PCF85263
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/************************************************************************************
* Name: pcf85263_rtc_initialize
*
* Description:
* Initialize the hardware RTC per the selected configuration. This function is
* called once during the OS initialization sequence by board-specific logic.
*
* After pcf85263_rtc_initialize() is called, the OS function clock_synchronize()
* should also be called to synchronize the system timer to a hardware RTC. That
* operation is normally performed automatically by the system during clock
* initialization. However, when an external RTC is used, the board logic will
* need to explicitly re-synchronize the system timer to the RTC when the RTC
* becomes available.
*
* Input Parameters:
* None
*
* Returned Value:
* Zero (OK) on success; a negated errno on failure
*
************************************************************************************/
struct i2c_dev_s; /* Forward reference */
int pcf85263_rtc_initialize(FAR struct i2c_dev_s *i2c);
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* CONFIG_RTC_PCF85263 */
#endif /* __INCLUDE_NUTTX_TIMERS_PCF85263_H */