diff --git a/configs/README.txt b/configs/README.txt index 4c9667170f..8559418700 100644 --- a/configs/README.txt +++ b/configs/README.txt @@ -226,6 +226,9 @@ defconfig -- This is a configuration file similar to the Linux CONFIG_SDCLONE_DISABLE. Disable cloning of all socket desciptors by task_create() when a new task is started. If set, all sockets will appear to be closed in the new task. + CONFIG_NXFLAT. Enable support for the NXFLAT binary format. + This format will support execution of NuttX binaries located + in a ROMFS filesystem (see examples/nxflat). The following can be used to disable categories of APIs supported by the OS. If the compiler supports weak functions, then it diff --git a/configs/c5471evm/Make.defs b/configs/c5471evm/Make.defs index 4153ec2cec..3751f7c30f 100644 --- a/configs/c5471evm/Make.defs +++ b/configs/c5471evm/Make.defs @@ -59,7 +59,7 @@ ifeq ($(ARCHCCMAJOR),4) else ARCHCPUFLAGS = -mapcs-32 -mcpu=arm7tdmi -msoft-float -fno-builtin endif -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -67,6 +67,7 @@ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ld.script CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/c5471evm/defconfig b/configs/c5471evm/defconfig index a27ede58e9..b5c16baa68 100644 --- a/configs/c5471evm/defconfig +++ b/configs/c5471evm/defconfig @@ -194,6 +194,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=ostest CONFIG_DEBUG=n @@ -216,6 +219,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/c5471evm/dhcpconfig b/configs/c5471evm/dhcpconfig index 1e0486278c..e631b739c9 100644 --- a/configs/c5471evm/dhcpconfig +++ b/configs/c5471evm/dhcpconfig @@ -194,6 +194,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=uip CONFIG_DEBUG=n @@ -216,6 +219,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/c5471evm/netconfig b/configs/c5471evm/netconfig index 109b3b7f97..0d0feed91e 100644 --- a/configs/c5471evm/netconfig +++ b/configs/c5471evm/netconfig @@ -194,6 +194,9 @@ CONFIG_NET_C5471_BASET10=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nettest CONFIG_DEBUG=n @@ -216,6 +219,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/c5471evm/nshconfig b/configs/c5471evm/nshconfig index a6637d0202..3ced42317e 100644 --- a/configs/c5471evm/nshconfig +++ b/configs/c5471evm/nshconfig @@ -194,6 +194,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nsh CONFIG_DEBUG=n @@ -216,6 +219,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/eagle100/httpd/Make.defs b/configs/eagle100/httpd/Make.defs index c2081bd72f..1b8282b5eb 100644 --- a/configs/eagle100/httpd/Make.defs +++ b/configs/eagle100/httpd/Make.defs @@ -84,12 +84,14 @@ ARCHCXXFLAGS = -fno-builtin -fno-exceptions ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/eagle100/httpd/defconfig b/configs/eagle100/httpd/defconfig index 3f00349db9..d8fc5aa70c 100644 --- a/configs/eagle100/httpd/defconfig +++ b/configs/eagle100/httpd/defconfig @@ -247,6 +247,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=uip CONFIG_DEBUG=n @@ -270,6 +273,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/eagle100/nettest/Make.defs b/configs/eagle100/nettest/Make.defs index fd2d3cb51d..03ae27f54c 100644 --- a/configs/eagle100/nettest/Make.defs +++ b/configs/eagle100/nettest/Make.defs @@ -84,12 +84,14 @@ ARCHCXXFLAGS = -fno-builtin -fno-exceptions ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/eagle100/nettest/defconfig b/configs/eagle100/nettest/defconfig index dfc4a8d61e..c4a90ca943 100644 --- a/configs/eagle100/nettest/defconfig +++ b/configs/eagle100/nettest/defconfig @@ -247,6 +247,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nettest CONFIG_DEBUG=y @@ -270,6 +273,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/eagle100/nsh/Make.defs b/configs/eagle100/nsh/Make.defs index f947883169..dead72b732 100644 --- a/configs/eagle100/nsh/Make.defs +++ b/configs/eagle100/nsh/Make.defs @@ -84,12 +84,14 @@ ARCHCXXFLAGS = -fno-builtin -fno-exceptions ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/eagle100/nsh/defconfig b/configs/eagle100/nsh/defconfig index bcce036be7..1fad6d0be0 100644 --- a/configs/eagle100/nsh/defconfig +++ b/configs/eagle100/nsh/defconfig @@ -247,6 +247,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nsh CONFIG_DEBUG=n @@ -269,6 +272,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/eagle100/nxflat/Make.defs b/configs/eagle100/nxflat/Make.defs new file mode 100644 index 0000000000..9885c44d33 --- /dev/null +++ b/configs/eagle100/nxflat/Make.defs @@ -0,0 +1,145 @@ +############################################################################ +# configs/eagle100/nxflat/Make.defs +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config + +# The default value for CROSSDEV can be overridden from the make command line: +# make -- Will build for the devkitARM toolchain +# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain +# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain +# make CROSSDEV=arm-elf- -- Will build for the NuttX buildroot toolchain + +CROSSDEV = arm-eabi- +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +MKNXFLAT = mknxflat +LDNXFLAT = ldnxflat + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CROSSDEV),arm-elf-) + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxflat/ld.script + MAXOPTIMIZATION = -Os +else + WINTOOL = y + DIRLINK = $(TOPDIR)/tools/winlink.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nxflat/ld.script}" + MAXOPTIMIZATION = -O2 +endif + +ifeq ("${CONFIG_DEBUG}","y") + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ + $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ + $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG),y) + LDFLAGS += -g +endif + +define PREPROCESS + @echo "CPP: $1->$2" + @$(CPP) $(CPPFLAGS) $1 -o $2 +endef + +define COMPILE + @echo "CC: $1" + @$(CC) -c $(CFLAGS) $1 -o $2 +endef + +define COMPILEXX + @echo "CXX: $1" + @$(CXX) -c $(CXXFLAGS) $1 -o $2 +endef + +define ASSEMBLE + @echo "AS: $1" + @$(CC) -c $(AFLAGS) $1 -o $2 +endef + +define ARCHIVE + echo "AR: $2"; \ + $(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; } +endef + +define CLEAN + @rm -f *.o *.a +endef + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/configs/eagle100/nxflat/defconfig b/configs/eagle100/nxflat/defconfig new file mode 100644 index 0000000000..f66eaa82fd --- /dev/null +++ b/configs/eagle100/nxflat/defconfig @@ -0,0 +1,581 @@ +############################################################################ +# configs/eagle100/nxflat/defconfig +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ +# +# architecture selection +# +# CONFIG_ARCH - identifies the arch subdirectory and, hence, the +# processor architecture. +# CONFIG_ARCH_family - for use in C code. This identifies the +# particular chip family that the architecture is implemented +# in. +# CONFIG_ARCH_architecture - for use in C code. This identifies the +# specific architecture within the chip familyl. +# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory +# CONFIG_ARCH_CHIP_name - For use in C code +# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence, +# the board that supports the particular chip or SoC. +# CONFIG_ARCH_BOARD_name - for use in C code +# CONFIG_ENDIAN_BIG - define if big endian (default is little endian) +# CONFIG_BOARD_LOOPSPERMSEC - for delay loops +# CONFIG_DRAM_SIZE - Describes the installed DRAM. +# CONFIG_DRAM_START - The start address of DRAM (physical) +# CONFIG_DRAM_END - Last address+1 of installed RAM +# CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization +# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt +# stack. If defined, this symbol is the size of the interrupt +# stack in bytes. If not defined, the user task stacks will be +# used during interrupt handling. +# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions +# CONFIG_ARCH_BOOTLOADER - Configure to use the MicroMint Eagle-100 +# Ethernet bootloader. +# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture. +# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that +# cause a 100 second delay during boot-up. This 100 second delay +# serves no purpose other than it allows you to calibratre +# CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure +# the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until +# the delay actually is 100 seconds. +# +CONFIG_ARCH=arm +CONFIG_ARCH_ARM=y +CONFIG_ARCH_CORTEXM3=y +CONFIG_ARCH_CHIP=lm3s +CONFIG_ARCH_CHIP_LM3S6918=y +CONFIG_ARCH_BOARD=eagle100 +CONFIG_ARCH_BOARD_EAGLE100=y +CONFIG_BOARD_LOOPSPERMSEC=4531 +CONFIG_DRAM_SIZE=0x00010000 +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE) +CONFIG_ARCH_IRQPRIO=y +CONFIG_DRAM_NUTTXENTRY=0x00002000 +CONFIG_ARCH_INTERRUPTSTACK=n +CONFIG_ARCH_STACKDUMP=y +CONFIG_ARCH_BOOTLOADER=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_CALIBRATION=n + +# +# LM3S6918 specific serial device driver settings +# +# CONFIG_UARTn_DISABLE - select to disable all support for +# the UART +# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the +# console and ttys0 (default is the UART0). +# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received. +# This specific the size of the receive buffer +# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before +# being sent. This specific the size of the transmit buffer +# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be +# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8. +# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity +# CONFIG_UARTn_2STOP - Two stop bits +# +CONFIG_UART0_DISABLE=n +CONFIG_UART1_DISABLE=y +CONFIG_UART0_SERIAL_CONSOLE=y +CONFIG_UART1_SERIAL_CONSOLE=n +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART1_TXBUFSIZE=256 +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART1_RXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART1_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART1_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART1_PARITY=0 +CONFIG_UART0_2STOP=0 +CONFIG_UART1_2STOP=0 + +# +# LM3S6918 specific SSI device driver settings +# +# CONFIG_SSIn_DISABLE - select to disable all support for +# the SSI +# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support +# Poll-waiting is recommended if the interrupt rate would be to +# high in the interrupt driven case. +# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before +# emptying the Rx FIFO. If the SPI frequency is high and this +# value is large, then larger values of this setting may cause +# Rx FIFO overrun errors. Default: half of the Tx FIFO size (4). +# +CONFIG_SSI0_DISABLE=n +CONFIG_SSI1_DISABLE=y +CONFIG_SSI_POLLWAIT=y +#CONFIG_SSI_TXLIMIT=4 + +# +# LM3S6918 specific serial device driver settings +# +# CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET) +# to build the LM3S Ethernet driver +# CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board. +# CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide +# a MAC address (via lm3s_ethernetmac()), then this should be selected. +# CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation +# CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation +# CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding +# CONFIG_LM3S_MULTICAST - Set to enable multicast frames +# CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode +# CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection. +# +CONFIG_LM3S_ETHERNET=n +CONFIG_LM3S_ETHLEDS=n +CONFIG_LM3S_BOARDMAC=y +CONFIG_LM3S_ETHHDUPLEX=n +CONFIG_LM3S_ETHNOAUTOCRC=n +CONFIG_LM3S_ETHNOPAD=n +CONFIG_LM3S_MULTICAST=n +CONFIG_LM3S_PROMISCUOUS=n +CONFIG_LM3S_BADCRC=n + +# +# General build options +# +# CONFIG_RRLOAD_BINARY - make the rrload binary format used with +# BSPs from www.ridgerun.com using the tools/mkimage.sh script +# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format +# used with many different loaders using the GNU objcopy program +# Should not be selected if you are not using the GNU toolchain. +# CONFIG_RAW_BINARY - make a raw binary format file used with many +# different loaders using the GNU objcopy program. This option +# should not be selected if you are not using the GNU toolchain. +# CONFIG_HAVE_LIBM - toolchain supports libm.a +# +CONFIG_RRLOAD_BINARY=n +CONFIG_INTELHEX_BINARY=n +CONFIG_MOTOROLA_SREC=n +CONFIG_RAW_BINARY=y +CONFIG_HAVE_LIBM=n + +# +# General OS setup +# +# CONFIG_EXAMPLE - identifies the subdirectory in examples +# that will be used in the build +# CONFIG_DEBUG - enables built-in debug options +# CONFIG_DEBUG_VERBOSE - enables verbose debug output +# CONFIG_MM_REGIONS - If the architecture includes multiple +# regions of memory to allocate from, this specifies the +# number of memory regions that the memory manager must +# handle and enables the API mm_addregion(start, end); +# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot +# time console output +# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz +# or TICKS_PER_MSEC=10. This setting may be defined to +# inform NuttX that the processor hardware is providing +# system timer interrupts at some interrupt interval other +# than 10 msec. +# CONFIG_RR_INTERVAL - The round robin timeslice will be set +# this number of milliseconds; Round robin scheduling can +# be disabled by setting this value to zero. +# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in +# scheduler to monitor system performance +# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a +# task name to save in the TCB. Useful if scheduler +# instrumentation is selected. Set to zero to disable. +# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY - +# Used to initialize the internal time logic. +# CONFIG_JULIAN_TIME - Enables Julian time conversions +# CONFIG_DEV_CONSOLE - Set if architecture-specific logic +# provides /dev/console. Enables stdout, stderr, stdin. +# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console +# driver (minimul support) +# CONFIG_MUTEX_TYPES: Set to enable support for recursive and +# errorcheck mutexes. Enables pthread_mutexattr_settype(). +# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority +# inheritance on mutexes and semaphores. +# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority +# inheritance is enabled. It defines the maximum number of +# different threads (minus one) that can take counts on a +# semaphore with priority inheritance support. This may be +# set to zero if priority inheritance is disabled OR if you +# are only using semaphores as mutexes (only one holder) OR +# if no more than two threads participate using a counting +# semaphore. +# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled, +# then this setting is the maximum number of higher priority +# threads (minus 1) than can be waiting for another thread +# to release a count on a semaphore. This value may be set +# to zero if no more than one thread is expected to wait for +# a semaphore. +# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors +# by task_create() when a new task is started. If set, all +# files/drivers will appear to be closed in the new task. +# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first +# three file descriptors (stdin, stdout, stderr) by task_create() +# when a new task is started. If set, all files/drivers will +# appear to be closed in the new task except for stdin, stdout, +# and stderr. +# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket +# desciptors by task_create() when a new task is started. If +# set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). +# +CONFIG_EXAMPLE=nxflat +CONFIG_DEBUG=n +CONFIG_DEBUG_VERBOSE=n +CONFIG_DEBUG_BINFMT=y +CONFIG_MM_REGIONS=1 +CONFIG_ARCH_LOWPUTC=y +CONFIG_RR_INTERVAL=200 +CONFIG_SCHED_INSTRUMENTATION=n +CONFIG_TASK_NAME_SIZE=0 +CONFIG_START_YEAR=2009 +CONFIG_START_MONTH=5 +CONFIG_START_DAY=6 +CONFIG_JULIAN_TIME=n +CONFIG_DEV_CONSOLE=y +CONFIG_DEV_LOWCONSOLE=y +CONFIG_MUTEX_TYPES=n +CONFIG_PRIORITY_INHERITANCE=n +CONFIG_SEM_PREALLOCHOLDERS=0 +CONFIG_SEM_NNESTPRIO=0 +CONFIG_FDCLONE_DISABLE=n +CONFIG_FDCLONE_STDIO=n +CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=y + +# +# The following can be used to disable categories of +# APIs supported by the OS. If the compiler supports +# weak functions, then it should not be necessary to +# disable functions unless you want to restrict usage +# of those APIs. +# +# There are certain dependency relationships in these +# features. +# +# o mq_notify logic depends on signals to awaken tasks +# waiting for queues to become full or empty. +# o pthread_condtimedwait() depends on signals to wake +# up waiting tasks. +# +CONFIG_DISABLE_CLOCK=n +CONFIG_DISABLE_POSIX_TIMERS=n +CONFIG_DISABLE_PTHREAD=n +CONFIG_DISABLE_SIGNALS=n +CONFIG_DISABLE_MQUEUE=n +CONFIG_DISABLE_MOUNTPOINT=y +CONFIG_DISABLE_ENVIRON=y +CONFIG_DISABLE_POLL=y + +# +# Misc libc settings +# +# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a +# little smaller if we do not support fieldwidthes +# +CONFIG_NOPRINTF_FIELDWIDTH=n + +# +# Allow for architecture optimized implementations +# +# The architecture can provide optimized versions of the +# following to improve sysem performance +# +CONFIG_ARCH_MEMCPY=n +CONFIG_ARCH_MEMCMP=n +CONFIG_ARCH_MEMMOVE=n +CONFIG_ARCH_MEMSET=n +CONFIG_ARCH_STRCMP=n +CONFIG_ARCH_STRCPY=n +CONFIG_ARCH_STRNCPY=n +CONFIG_ARCH_STRLEN=n +CONFIG_ARCH_BZERO=n +CONFIG_ARCH_KMALLOC=n +CONFIG_ARCH_KZMALLOC=n +CONFIG_ARCH_KFREE=n + +# +# Sizes of configurable things (0 disables) +# +# CONFIG_MAX_TASKS - The maximum number of simultaneously +# active tasks. This value must be a power of two. +# CONFIG_MAX_TASK_ARGS - This controls the maximum number of +# of parameters that a task may receive (i.e., maxmum value +# of 'argc') +# CONFIG_NPTHREAD_KEYS - The number of items of thread- +# specific data that can be retained +# CONFIG_NFILE_DESCRIPTORS - The maximum number of file +# descriptors (one for each open) +# CONFIG_NFILE_STREAMS - The maximum number of streams that +# can be fopen'ed +# CONFIG_NAME_MAX - The maximum size of a file name. +# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate +# on fopen. (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_NUNGET_CHARS - Number of characters that can be +# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0) +# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message +# structures. The system manages a pool of preallocated +# message structures to minimize dynamic allocations +# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with +# a fixed payload size given by this settin (does not include +# other message structure overhead. +# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that +# can be passed to a watchdog handler +# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog +# structures. The system manages a pool of preallocated +# watchdog structures to minimize dynamic allocations +# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX +# timer structures. The system manages a pool of preallocated +# timer structures to minimize dynamic allocations. Set to +# zero for all dynamic allocations. +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_STDIO_BUFFER_SIZE=256 +CONFIG_NUNGET_CHARS=2 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Filesystem configuration +# +# CONFIG_FS_FAT - Enable FAT filesystem support +# CONFIG_FAT_SECTORSIZE - Max supported sector size +# CONFIG_FS_ROMFS - Enable ROMFS filesystem support +CONFIG_FS_FAT=n +CONFIG_FS_ROMFS=n + +# +# SPI-based MMC/SD driver +# +# CONFIG_MMCSD_NSLOTS +# Number of MMC/SD slots supported by the driver +# CONFIG_MMCSD_READONLY +# Provide read-only access (default is read/write) +# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card. +# Default is 20MHz. +# +CONFIG_MMCSD_NSLOTS=1 +CONFIG_MMCSD_READONLY=n +CONFIG_MMCSD_SPICLOCK=12500000 + +# +# TCP/IP and UDP support via uIP +# CONFIG_NET - Enable or disable all network features +# CONFIG_NET_IPv6 - Build in support for IPv6 +# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread. +# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options +# CONFIG_NET_BUFSIZE - uIP buffer size +# CONFIG_NET_TCP - TCP support on or off +# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks) +# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers +# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero) +# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until +# accept() is called. The size of the backlog is selected when listen() is called. +# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks) +# CONFIG_NET_UDP - UDP support on or off +# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off +# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections +# CONFIG_NET_ICMP - ICMP ping response support on or off +# CONFIG_NET_ICMP_PING - ICMP ping request support on or off +# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address +# CONFIG_NET_STATISTICS - uIP statistics on or off +# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window +# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table +# CONFIG_NET_BROADCAST - Broadcast support +# CONFIG_NET_LLH_LEN - The link level header length +# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates +# +CONFIG_NET=n +CONFIG_NET_IPv6=n +CONFIG_NSOCKET_DESCRIPTORS=0 +CONFIG_NET_SOCKOPTS=y +CONFIG_NET_BUFSIZE=420 +CONFIG_NET_TCP=n +CONFIG_NET_TCP_CONNS=40 +CONFIG_NET_MAX_LISTENPORTS=40 +CONFIG_NET_UDP=n +CONFIG_NET_UDP_CHECKSUMS=y +#CONFIG_NET_UDP_CONNS=10 +CONFIG_NET_ICMP=n +CONFIG_NET_ICMP_PING=n +#CONFIG_NET_PINGADDRCONF=0 +CONFIG_NET_STATISTICS=y +#CONFIG_NET_RECEIVE_WINDOW= +#CONFIG_NET_ARPTAB_SIZE=8 +CONFIG_NET_BROADCAST=n +#CONFIG_NET_LLH_LEN=14 +#CONFIG_NET_FWCACHE_SIZE=2 + +# +# UIP Network Utilities +# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP +# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries +# +CONFIG_NET_DHCP_LIGHT=n +CONFIG_NET_RESOLV_ENTRIES=4 + +# +# Settings for examples/uip +# +CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_EXAMPLE_UIP_DHCPC=n + +# +# Settings for examples/nettest +CONFIG_EXAMPLE_NETTEST_SERVER=n +CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n +CONFIG_EXAMPLE_NETTEST_NOMAC=n +CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1) + +# +# Settings for examples/ostest +# +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 + +# +# Settings for examples/nsh +# +# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer +# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno) +# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line +# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads. +# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi +# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support +# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands +# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc +# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end +# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end +# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture +# specific initialization (nsh_archinitialize()). +# +# If CONFIG_EXAMPLES_NSH_TELNET is selected: +# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size +# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP +# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address +# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address +# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask +# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address +# +# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected: +# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint +# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script +# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor +# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size +# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor +# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size +# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors +# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint +# +CONFIG_EXAMPLES_NSH_FILEIOSIZE=512 +CONFIG_EXAMPLES_NSH_STRERROR=n +CONFIG_EXAMPLES_NSH_LINELEN=64 +CONFIG_EXAMPLES_NSH_STACKSIZE=2048 +CONFIG_EXAMPLES_NSH_NESTDEPTH=3 +CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n +CONFIG_EXAMPLES_NSH_DISABLEBG=n +CONFIG_EXAMPLES_NSH_ROMFSETC=n +CONFIG_EXAMPLES_NSH_CONSOLE=y +CONFIG_EXAMPLES_NSH_TELNET=n +CONFIG_EXAMPLES_NSH_ARCHINIT=n +CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512 +CONFIG_EXAMPLES_NSH_DHCPC=n +CONFIG_EXAMPLES_NSH_NOMAC=n +CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2) +CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1) +CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0) +CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc" +CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS" +CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0 +CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64 +CONFIG_EXAMPLES_NSH_FATDEVNO=1 +CONFIG_EXAMPLES_NSH_FATSECTSIZE=512 +CONFIG_EXAMPLES_NSH_FATNSECTORS=1024 +CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp + +# +# Architecture-specific NSH options +# +CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0 +CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0 +CONFIG_EXAMPLES_NSH_MMCSDMINOR=0 + +# +# Stack and heap information +# +# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP +# operation from FLASH but must copy initialized .data sections to RAM. +# (should also be =n for the Eagle100 which always runs from flash) +# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH +# but copy themselves entirely into RAM for better performance. +# CONFIG_CUSTOM_STACK - The up_ implementation will handle +# all stack operations outside of the nuttx model. +# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only) +# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack. +# This is the thread that (1) performs the inital boot of the system up +# to the point where user_start() is spawned, and (2) there after is the +# IDLE thread that executes only when there is no other thread ready to +# run. +# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate +# for the main user thread that begins at the user_start() entry point. +# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size +# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size +# CONFIG_HEAP_BASE - The beginning of the heap +# CONFIG_HEAP_SIZE - The size of the heap +# +CONFIG_BOOT_RUNFROMFLASH=n +CONFIG_BOOT_COPYTORAM=n +CONFIG_CUSTOM_STACK=n +CONFIG_STACK_POINTER= +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +CONFIG_HEAP_BASE= +CONFIG_HEAP_SIZE= diff --git a/configs/eagle100/nxflat/ld.script b/configs/eagle100/nxflat/ld.script new file mode 100644 index 0000000000..68969391ee --- /dev/null +++ b/configs/eagle100/nxflat/ld.script @@ -0,0 +1,111 @@ +/**************************************************************************** + * configs/eagle100/nxflat/ld.script + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +/* The LM3S6918 has 256Kb of FLASH beginning at address 0x0000:0000. However, + * if the the Eagle100 Ethernet bootloader is used, then the entry point must + * be at the following offset in FLASH (and the size of the FLASH must be + * reduced to 248Kb): + */ + +MEMORY +{ +/* flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K */ + flash (rx) : ORIGIN = 0x00002000, LENGTH = 248K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K +} + +OUTPUT_ARCH(arm) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + _eronly = ABSOLUTE(.); /* See below */ + + /* The LM3S6918 has 64Kb of SRAM beginning at the following address */ + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .ARM.extab : { + *(.ARM.extab*) + } >sram + + .ARM.exidx : { + __exidx_start = ABSOLUTE(.); + *(.ARM.exidx*) + __exidx_end = ABSOLUTE(.); + } >sram + + .bss : { /* BSS */ + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/eagle100/nxflat/setenv.sh b/configs/eagle100/nxflat/setenv.sh new file mode 100755 index 0000000000..4e0c8e040b --- /dev/null +++ b/configs/eagle100/nxflat/setenv.sh @@ -0,0 +1,46 @@ +#!/bin/bash +# configs/eagle100/nxflat/setenv.sh +# +# Copyright (C) 2009 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$(basename $0)" = "setenv.sh" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi + +WD=`pwd` +export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" +export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/configs/eagle100/ostest/Make.defs b/configs/eagle100/ostest/Make.defs index 5794cf6c37..b7dfca3a79 100644 --- a/configs/eagle100/ostest/Make.defs +++ b/configs/eagle100/ostest/Make.defs @@ -84,12 +84,14 @@ ARCHCXXFLAGS = -fno-builtin -fno-exceptions ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/eagle100/ostest/defconfig b/configs/eagle100/ostest/defconfig index 20dded4d1f..1a20946c46 100644 --- a/configs/eagle100/ostest/defconfig +++ b/configs/eagle100/ostest/defconfig @@ -247,6 +247,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=ostest CONFIG_DEBUG=n @@ -269,6 +272,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/mcu123-lpc214x/nsh/Make.defs b/configs/mcu123-lpc214x/nsh/Make.defs index 00c75988aa..475a6cbb4d 100644 --- a/configs/mcu123-lpc214x/nsh/Make.defs +++ b/configs/mcu123-lpc214x/nsh/Make.defs @@ -93,15 +93,17 @@ endif ARCHCFLAGS = -fno-builtin ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/mcu123-lpc214x/nsh/defconfig b/configs/mcu123-lpc214x/nsh/defconfig index 0f93d81fb2..5703b9f077 100644 --- a/configs/mcu123-lpc214x/nsh/defconfig +++ b/configs/mcu123-lpc214x/nsh/defconfig @@ -198,6 +198,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nsh CONFIG_DEBUG=n @@ -220,6 +223,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/mcu123-lpc214x/ostest/Make.defs b/configs/mcu123-lpc214x/ostest/Make.defs index 96b4873bde..9255c59945 100644 --- a/configs/mcu123-lpc214x/ostest/Make.defs +++ b/configs/mcu123-lpc214x/ostest/Make.defs @@ -93,15 +93,17 @@ endif ARCHCFLAGS = -fno-builtin ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/mcu123-lpc214x/ostest/defconfig b/configs/mcu123-lpc214x/ostest/defconfig index b29d84b448..a88f03cf25 100644 --- a/configs/mcu123-lpc214x/ostest/defconfig +++ b/configs/mcu123-lpc214x/ostest/defconfig @@ -198,6 +198,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=ostest CONFIG_DEBUG=n @@ -220,6 +223,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/mcu123-lpc214x/usbserial/Make.defs b/configs/mcu123-lpc214x/usbserial/Make.defs index 3b6c201c0b..933e50ef07 100644 --- a/configs/mcu123-lpc214x/usbserial/Make.defs +++ b/configs/mcu123-lpc214x/usbserial/Make.defs @@ -93,15 +93,17 @@ endif ARCHCFLAGS = -fno-builtin ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/mcu123-lpc214x/usbserial/defconfig b/configs/mcu123-lpc214x/usbserial/defconfig index 1d2784d2e1..b3e9fa1122 100644 --- a/configs/mcu123-lpc214x/usbserial/defconfig +++ b/configs/mcu123-lpc214x/usbserial/defconfig @@ -198,6 +198,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=usbserial CONFIG_DEBUG=n @@ -483,6 +486,7 @@ CONFIG_USBSER_VENDORSTR="Nuttx" CONFIG_USBSER_PRODUCTSTR="USBdev Serial" CONFIG_USBSER_RXBUFSIZE=512 CONFIG_USBSER_TXBUFSIZE=512 +CONFIG_NXFLAT=n # # USB Storage Device Configuration diff --git a/configs/mcu123-lpc214x/usbstorage/Make.defs b/configs/mcu123-lpc214x/usbstorage/Make.defs index e544917d4f..de475239ce 100644 --- a/configs/mcu123-lpc214x/usbstorage/Make.defs +++ b/configs/mcu123-lpc214x/usbstorage/Make.defs @@ -93,15 +93,17 @@ endif ARCHCFLAGS = -fno-builtin ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/mcu123-lpc214x/usbstorage/defconfig b/configs/mcu123-lpc214x/usbstorage/defconfig index be3cf97e83..247031ea80 100644 --- a/configs/mcu123-lpc214x/usbstorage/defconfig +++ b/configs/mcu123-lpc214x/usbstorage/defconfig @@ -198,6 +198,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=usbstorage CONFIG_DEBUG=n @@ -221,6 +224,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/mx1ads/ostest/Make.defs b/configs/mx1ads/ostest/Make.defs index 489b6cccea..c45d006e30 100644 --- a/configs/mx1ads/ostest/Make.defs +++ b/configs/mx1ads/ostest/Make.defs @@ -69,13 +69,15 @@ ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/mx1ads/ostest/defconfig b/configs/mx1ads/ostest/defconfig index c296ef4682..0ee7cf1824 100644 --- a/configs/mx1ads/ostest/defconfig +++ b/configs/mx1ads/ostest/defconfig @@ -205,6 +205,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=ostest CONFIG_DEBUG=n @@ -227,6 +230,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/ntosd-dm320/nettest/Make.defs b/configs/ntosd-dm320/nettest/Make.defs index 9d4a077bbc..73611d11c1 100644 --- a/configs/ntosd-dm320/nettest/Make.defs +++ b/configs/ntosd-dm320/nettest/Make.defs @@ -59,7 +59,8 @@ ifeq ($(ARCHCCMAJOR),4) else ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin endif -ARCHPICFLAGS = -fpic + +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -67,6 +68,7 @@ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nettest/ld.script CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/ntosd-dm320/nettest/defconfig b/configs/ntosd-dm320/nettest/defconfig index 239959e0d8..838602dbc0 100644 --- a/configs/ntosd-dm320/nettest/defconfig +++ b/configs/ntosd-dm320/nettest/defconfig @@ -182,6 +182,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nettest CONFIG_DEBUG=n @@ -204,6 +207,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/ntosd-dm320/nsh/Make.defs b/configs/ntosd-dm320/nsh/Make.defs index 41fa16f23f..d46051160d 100644 --- a/configs/ntosd-dm320/nsh/Make.defs +++ b/configs/ntosd-dm320/nsh/Make.defs @@ -59,7 +59,8 @@ ifeq ($(ARCHCCMAJOR),4) else ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin endif -ARCHPICFLAGS = -fpic + +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -67,6 +68,7 @@ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/ntosd-dm320/nsh/defconfig b/configs/ntosd-dm320/nsh/defconfig index b071dc6489..df05875802 100644 --- a/configs/ntosd-dm320/nsh/defconfig +++ b/configs/ntosd-dm320/nsh/defconfig @@ -182,6 +182,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nsh CONFIG_DEBUG=n @@ -204,6 +207,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/ntosd-dm320/ostest/Make.defs b/configs/ntosd-dm320/ostest/Make.defs index 69d9751fc0..6feacaa939 100644 --- a/configs/ntosd-dm320/ostest/Make.defs +++ b/configs/ntosd-dm320/ostest/Make.defs @@ -59,7 +59,8 @@ ifeq ($(ARCHCCMAJOR),4) else ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin endif -ARCHPICFLAGS = -fpic + +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -67,6 +68,7 @@ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/ntosd-dm320/ostest/defconfig b/configs/ntosd-dm320/ostest/defconfig index ccc925817a..5aed912e83 100644 --- a/configs/ntosd-dm320/ostest/defconfig +++ b/configs/ntosd-dm320/ostest/defconfig @@ -182,6 +182,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=ostest CONFIG_DEBUG=n @@ -204,6 +207,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/ntosd-dm320/poll/Make.defs b/configs/ntosd-dm320/poll/Make.defs index ad72fc66fa..8e6b123c87 100644 --- a/configs/ntosd-dm320/poll/Make.defs +++ b/configs/ntosd-dm320/poll/Make.defs @@ -59,7 +59,8 @@ ifeq ($(ARCHCCMAJOR),4) else ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin endif -ARCHPICFLAGS = -fpic + +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -67,6 +68,7 @@ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/poll/ld.script CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/ntosd-dm320/poll/defconfig b/configs/ntosd-dm320/poll/defconfig index 9052f70486..3c52d0c6b4 100644 --- a/configs/ntosd-dm320/poll/defconfig +++ b/configs/ntosd-dm320/poll/defconfig @@ -182,6 +182,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=poll CONFIG_DEBUG=n @@ -204,6 +207,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/ntosd-dm320/udp/Make.defs b/configs/ntosd-dm320/udp/Make.defs index 22b7552377..0d183ad3a7 100644 --- a/configs/ntosd-dm320/udp/Make.defs +++ b/configs/ntosd-dm320/udp/Make.defs @@ -59,7 +59,8 @@ ifeq ($(ARCHCCMAJOR),4) else ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin endif -ARCHPICFLAGS = -fpic + +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -67,6 +68,7 @@ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/udp/ld.script CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/ntosd-dm320/udp/defconfig b/configs/ntosd-dm320/udp/defconfig index aae22728ec..646611bd6d 100644 --- a/configs/ntosd-dm320/udp/defconfig +++ b/configs/ntosd-dm320/udp/defconfig @@ -182,6 +182,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=udp CONFIG_DEBUG=n @@ -204,6 +207,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/ntosd-dm320/uip/Make.defs b/configs/ntosd-dm320/uip/Make.defs index 4879981842..5effc873db 100644 --- a/configs/ntosd-dm320/uip/Make.defs +++ b/configs/ntosd-dm320/uip/Make.defs @@ -59,7 +59,8 @@ ifeq ($(ARCHCCMAJOR),4) else ARCHCPUFLAGS = -mapcs-32 -mtune=arm9tdmi -march=armv5te -msoft-float -fno-builtin endif -ARCHPICFLAGS = -fpic + +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHDEFINES = ARCHINCLUDES = -I. -isystem $(TOPDIR)/include @@ -67,6 +68,7 @@ ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/uip/ld.script CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/ntosd-dm320/uip/defconfig b/configs/ntosd-dm320/uip/defconfig index 38c45f49ed..43605906f3 100644 --- a/configs/ntosd-dm320/uip/defconfig +++ b/configs/ntosd-dm320/uip/defconfig @@ -182,6 +182,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=uip CONFIG_DEBUG=n @@ -204,6 +207,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/olimex-strp711/nsh/Make.defs b/configs/olimex-strp711/nsh/Make.defs index 762ff0d2fa..3c00e29717 100644 --- a/configs/olimex-strp711/nsh/Make.defs +++ b/configs/olimex-strp711/nsh/Make.defs @@ -93,15 +93,17 @@ endif ARCHCFLAGS = -fno-builtin ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/olimex-strp711/nsh/defconfig b/configs/olimex-strp711/nsh/defconfig index dff59eebbe..f414066906 100644 --- a/configs/olimex-strp711/nsh/defconfig +++ b/configs/olimex-strp711/nsh/defconfig @@ -265,6 +265,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=nsh CONFIG_DEBUG=n @@ -287,6 +290,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of diff --git a/configs/olimex-strp711/ostest/Make.defs b/configs/olimex-strp711/ostest/Make.defs index 86b33807b1..5d368774c8 100644 --- a/configs/olimex-strp711/ostest/Make.defs +++ b/configs/olimex-strp711/ostest/Make.defs @@ -93,15 +93,17 @@ endif ARCHCFLAGS = -fno-builtin ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHPICFLAGS = -fpic +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow ARCHWARNINGSXX = -Wall -Wshadow ARCHDEFINES = CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) AFLAGS = $(CFLAGS) -D__ASSEMBLY__ diff --git a/configs/olimex-strp711/ostest/defconfig b/configs/olimex-strp711/ostest/defconfig index 1879808386..9960aa5038 100644 --- a/configs/olimex-strp711/ostest/defconfig +++ b/configs/olimex-strp711/ostest/defconfig @@ -265,6 +265,9 @@ CONFIG_HAVE_LIBM=n # CONFIG_SDCLONE_DISABLE. Disable cloning of all socket # desciptors by task_create() when a new task is started. If # set, all sockets will appear to be closed in the new task. +# CONFIG_NXFLAT. Enable support for the NXFLAT binary format. +# This format will support execution of NuttX binaries located +# in a ROMFS filesystem (see examples/nxflat). # CONFIG_EXAMPLE=ostest CONFIG_DEBUG=n @@ -287,6 +290,7 @@ CONFIG_SEM_NNESTPRIO=0 CONFIG_FDCLONE_DISABLE=n CONFIG_FDCLONE_STDIO=n CONFIG_SDCLONE_DISABLE=y +CONFIG_NXFLAT=n # # The following can be used to disable categories of