From 3941e4725916054a678cf52a55889b6ad6730dbf Mon Sep 17 00:00:00 2001 From: Masayuki Ishikawa Date: Thu, 17 Sep 2020 15:03:26 +0900 Subject: [PATCH] boards: spresense: Update README.txt regarding gs2200m Signed-off-by: Masayuki Ishikawa --- boards/arm/cxd56xx/spresense/README.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/boards/arm/cxd56xx/spresense/README.txt b/boards/arm/cxd56xx/spresense/README.txt index dc4ecdf8eb..85f4cd51bd 100644 --- a/boards/arm/cxd56xx/spresense/README.txt +++ b/boards/arm/cxd56xx/spresense/README.txt @@ -59,7 +59,7 @@ Configuration sub-directories If the connection succeeded, IP address is statically assigned. nsh> ifconfig - eth0 Link encap:Ethernet HWaddr 3c:95:09:00:69:92 at UP + wlan0 Link encap:Ethernet HWaddr 3c:95:09:00:69:92 at UP inet addr:10.0.0.2 DRaddr:10.0.0.1 Mask:255.255.255.0 Then, you can run DHCP client (renew command) to obtain IP address as well @@ -67,10 +67,10 @@ Configuration sub-directories GS2200M is disabled. If you enable the internal DHCP client, you can not use DNS client on NuttX) - nsh> renew eth0 & + nsh> renew wlan0 & renew [6:100] nsh> ifconfig - eth0 Link encap:Ethernet HWaddr 3c:95:09:00:69:92 at UP + wlan0 Link encap:Ethernet HWaddr 3c:95:09:00:69:92 at UP inet addr:192.168.1.101 DRaddr:192.168.1.1 Mask:255.255.255.0 Now, you can run telnetd and webserver on Spresense. @@ -107,7 +107,7 @@ Configuration sub-directories assigned. nsh> ifconfig - eth0 Link encap:Ethernet HWaddr 3c:95:09:00:69:93 at UP + wlan0 Link encap:Ethernet HWaddr 3c:95:09:00:69:93 at UP inet addr:192.168.11.1 DRaddr:192.168.11.1 Mask:255.255.255.0 Now you can connect your PC to the AP with the above SSID and WPA2-PSK