sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

xtensa/esp32s3: Apply style fixes throughout serial driver

Browse Source 
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
This commit is contained in:
Gustavo Henrique Nihei 2022-03-16 13:55:02 -03:00 committed by Alan Carvalho de Assis
parent 0dc2930403
commit 39e9a17e60
1 changed files with 33 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

69
arch/xtensa/src/esp32s3/esp32s3_serial.c
View File

@ -23,40 +23,37 @@
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/arch.h>
#include <nuttx/irq.h>
#include <nuttx/serial/serial.h>
#include <nuttx/fs/ioctl.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <unistd.h>
#include <string.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <errno.h>
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#include <sys/types.h>
#ifdef CONFIG_SERIAL_TERMIOS
# include <termios.h>
#endif
#include <unistd.h>
#include <nuttx/arch.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/irq.h>
#include <nuttx/serial/serial.h>
#include "xtensa.h"
#include "chip.h"
#include "hardware/esp32s3_uart.h"
#include "hardware/esp32s3_system.h"
#include "esp32s3_config.h"
#include "esp32s3_irq.h"
#include "esp32s3_lowputc.h"
#include "hardware/esp32s3_uart.h"
#include "hardware/esp32s3_system.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* The console is enabled, and it's not the syslog device,
* so, it should be a serial device.
/* The console is enabled, and it's not the syslog device, so, it should be a
* serial device.
*/
#ifdef USE_SERIALDRIVER
@ -67,8 +64,8 @@
* Console can be UART0 or UART1, but will always be ttys0.
*/
/* In case a UART was assigned to be
* the console and the corresponding peripheral was also selected.
/* In case a UART was assigned to be the console and the corresponding
* peripheral was also selected.
*/
#ifdef CONSOLE_UART
@ -92,7 +89,7 @@
# endif
#endif /* CONSOLE_UART */
/* Pick ttys1 */
/* Pick ttyS1 */
#if defined(CONFIG_ESP32S3_UART0) && !defined(UART0_ASSIGNED)
# define TTYS1_DEV g_uart0_dev /* UART0 is ttyS1 */
@ -140,21 +137,21 @@ static bool esp32s3_rxflowcontrol(struct uart_dev_s *dev,
static struct uart_ops_s g_uart_ops =
{
.setup = esp32s3_setup,
.shutdown = esp32s3_shutdown,
.attach = esp32s3_attach,
.detach = esp32s3_detach,
.txint = esp32s3_txint,
.rxint = esp32s3_rxint,
.rxavailable = esp32s3_rxavailable,
.txready = esp32s3_txready,
.txempty = esp32s3_txempty,
.send = esp32s3_send,
.receive = esp32s3_receive,
.ioctl = esp32s3_ioctl,
.setup = esp32s3_setup,
.shutdown = esp32s3_shutdown,
.attach = esp32s3_attach,
.detach = esp32s3_detach,
.ioctl = esp32s3_ioctl,
.receive = esp32s3_receive,
.rxint = esp32s3_rxint,
.rxavailable = esp32s3_rxavailable,
#ifdef CONFIG_SERIAL_IFLOWCONTROL
.rxflowcontrol = esp32s3_rxflowcontrol,
.rxflowcontrol = esp32s3_rxflowcontrol,
#endif
.send = esp32s3_send,
.txint = esp32s3_txint,
.txready = esp32s3_txready,
.txempty = esp32s3_txempty
};
/* UART 0 */
@ -678,7 +675,7 @@ static bool esp32s3_txempty(struct uart_dev_s *dev)
static void esp32s3_send(struct uart_dev_s *dev, int ch)
{
esp32s3_lowputc_send_byte(dev->priv, ch);
esp32s3_lowputc_send_byte(dev->priv, (char)ch);
}
/****************************************************************************
@ -1111,7 +1108,7 @@ int up_putc(int ch)
up_lowputc('\r');
}
up_lowputc(ch);
up_lowputc((char)ch);
#ifdef CONSOLE_UART
esp32s3_lowputc_restore_all_uart_int(CONSOLE_DEV.priv, &int_status);