Add support for the Olimex LPC1766-STK board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3079 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
bd413b1d00
commit
3bdb2445c9
@ -12,7 +12,6 @@ Contents
|
|||||||
GNU Toolchain Options
|
GNU Toolchain Options
|
||||||
IDEs
|
IDEs
|
||||||
NuttX buildroot Toolchain
|
NuttX buildroot Toolchain
|
||||||
USB Device Controller Functions
|
|
||||||
LEDs
|
LEDs
|
||||||
Nucleus 2G Configuration Options
|
Nucleus 2G Configuration Options
|
||||||
Configurations
|
Configurations
|
||||||
|
|||||||
359
configs/olimex-lpc1766stk/README.txt
Executable file
359
configs/olimex-lpc1766stk/README.txt
Executable file
@ -0,0 +1,359 @@
|
|||||||
|
README
|
||||||
|
^^^^^^
|
||||||
|
|
||||||
|
README for NuttX port to the Olimex LPC1766-STK development board
|
||||||
|
|
||||||
|
Contents
|
||||||
|
^^^^^^^^
|
||||||
|
|
||||||
|
Olimex LPC1766-STK development board
|
||||||
|
Development Environment
|
||||||
|
GNU Toolchain Options
|
||||||
|
IDEs
|
||||||
|
NuttX buildroot Toolchain
|
||||||
|
LEDs
|
||||||
|
Olimex LPC1766-STK Configuration Options
|
||||||
|
Configurations
|
||||||
|
|
||||||
|
Olimex LPC1766-STK development board
|
||||||
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
GPIO Usage:
|
||||||
|
|
||||||
|
[To be provided]
|
||||||
|
|
||||||
|
Development Environment
|
||||||
|
^^^^^^^^^^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
Either Linux or Cygwin on Windows can be used for the development environment.
|
||||||
|
The source has been built only using the GNU toolchain (see below). Other
|
||||||
|
toolchains will likely cause problems. Testing was performed using the Cygwin
|
||||||
|
environment.
|
||||||
|
|
||||||
|
GNU Toolchain Options
|
||||||
|
^^^^^^^^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
The NuttX make system has been modified to support the following different
|
||||||
|
toolchain options.
|
||||||
|
|
||||||
|
1. The CodeSourcery GNU toolchain,
|
||||||
|
2. The devkitARM GNU toolchain,
|
||||||
|
3. The NuttX buildroot Toolchain (see below).
|
||||||
|
|
||||||
|
All testing has been conducted using the NuttX buildroot toolchain. However,
|
||||||
|
the make system is setup to default to use the devkitARM toolchain. To use
|
||||||
|
the CodeSourcery or devkitARM toolchain, you simply need add one of the
|
||||||
|
following configuration options to your .config (or defconfig) file:
|
||||||
|
|
||||||
|
CONFIG_LPC17_CODESOURCERYW=y : CodeSourcery under Windows
|
||||||
|
CONFIG_LPC17_CODESOURCERYL=y : CodeSourcery under Linux
|
||||||
|
CONFIG_LPC17_DEVKITARM=y : devkitARM under Windows
|
||||||
|
CONFIG_LPC17_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||||
|
|
||||||
|
If you are not using CONFIG_LPC17_BUILDROOT, then you may also have to modify
|
||||||
|
the PATH in the setenv.h file if your make cannot find the tools.
|
||||||
|
|
||||||
|
NOTE: the CodeSourcery (for Windows)and devkitARM are Windows native toolchains.
|
||||||
|
The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or
|
||||||
|
Linux native toolchains. There are several limitations to using a Windows based
|
||||||
|
toolchain in a Cygwin environment. The three biggest are:
|
||||||
|
|
||||||
|
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
|
||||||
|
performed automatically in the Cygwin makefiles using the 'cygpath' utility
|
||||||
|
but you might easily find some new path problems. If so, check out 'cygpath -w'
|
||||||
|
|
||||||
|
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
|
||||||
|
are used in Nuttx (e.g., include/arch). The make system works around these
|
||||||
|
problems for the Windows tools by copying directories instead of linking them.
|
||||||
|
But this can also cause some confusion for you: For example, you may edit
|
||||||
|
a file in a "linked" directory and find that your changes had not effect.
|
||||||
|
That is because you are building the copy of the file in the "fake" symbolic
|
||||||
|
directory. If you use a Windows toolchain, you should get in the habit of
|
||||||
|
making like this:
|
||||||
|
|
||||||
|
make clean_context all
|
||||||
|
|
||||||
|
An alias in your .bashrc file might make that less painful.
|
||||||
|
|
||||||
|
3. Dependencies are not made when using Windows versions of the GCC. This is
|
||||||
|
because the dependencies are generated using Windows pathes which do not
|
||||||
|
work with the Cygwin make.
|
||||||
|
|
||||||
|
Support has been added for making dependencies with the windows-native toolchains.
|
||||||
|
That support can be enabled by modifying your Make.defs file as follows:
|
||||||
|
|
||||||
|
- MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
|
||||||
|
|
||||||
|
If you have problems with the dependency build (for example, if you are not
|
||||||
|
building on C:), then you may need to modify tools/mkdeps.sh
|
||||||
|
|
||||||
|
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
|
||||||
|
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
|
||||||
|
-Os.
|
||||||
|
|
||||||
|
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
|
||||||
|
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
|
||||||
|
path or will get the wrong version of make.
|
||||||
|
|
||||||
|
IDEs
|
||||||
|
^^^^
|
||||||
|
|
||||||
|
NuttX is built using command-line make. It can be used with an IDE, but some
|
||||||
|
effort will be required to create the project (There is a simple RIDE project
|
||||||
|
in the RIDE subdirectory).
|
||||||
|
|
||||||
|
Makefile Build
|
||||||
|
--------------
|
||||||
|
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
|
||||||
|
simply use the NuttX makefile to build the system. That is almost for free
|
||||||
|
under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
|
||||||
|
makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
|
||||||
|
there is a lot of help on the internet).
|
||||||
|
|
||||||
|
Native Build
|
||||||
|
------------
|
||||||
|
Here are a few tips before you start that effort:
|
||||||
|
|
||||||
|
1) Select the toolchain that you will be using in your .config file
|
||||||
|
2) Start the NuttX build at least one time from the Cygwin command line
|
||||||
|
before trying to create your project. This is necessary to create
|
||||||
|
certain auto-generated files and directories that will be needed.
|
||||||
|
3) Set up include pathes: You will need include/, arch/arm/src/lpc17xx,
|
||||||
|
arch/arm/src/common, arch/arm/src/cortexm3, and sched/.
|
||||||
|
4) All assembly files need to have the definition option -D __ASSEMBLY__
|
||||||
|
on the command line.
|
||||||
|
|
||||||
|
Startup files will probably cause you some headaches. The NuttX startup file
|
||||||
|
is arch/arm/src/lpc17x/lpc17_vectors.S.
|
||||||
|
|
||||||
|
NuttX buildroot Toolchain
|
||||||
|
^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
|
||||||
|
be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
|
||||||
|
different from the default in your PATH variable).
|
||||||
|
|
||||||
|
If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
|
||||||
|
SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
|
||||||
|
This GNU toolchain builds and executes in the Linux or Cygwin environment.
|
||||||
|
|
||||||
|
1. You must have already configured Nuttx in <some-dir>/nuttx.
|
||||||
|
|
||||||
|
cd tools
|
||||||
|
./configure.sh olimex-lpc1766stk/<sub-dir>
|
||||||
|
|
||||||
|
2. Download the latest buildroot package into <some-dir>
|
||||||
|
|
||||||
|
3. unpack the buildroot tarball. The resulting directory may
|
||||||
|
have versioning information on it like buildroot-x.y.z. If so,
|
||||||
|
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
|
||||||
|
|
||||||
|
4. cd <some-dir>/buildroot
|
||||||
|
|
||||||
|
5. cp configs/cortexm3-defconfig-4.3.3 .config
|
||||||
|
|
||||||
|
6. make oldconfig
|
||||||
|
|
||||||
|
7. make
|
||||||
|
|
||||||
|
8. Edit setenv.h, if necessary, so that the PATH variable includes
|
||||||
|
the path to the newly built binaries.
|
||||||
|
|
||||||
|
See the file configs/README.txt in the buildroot source tree. That has more
|
||||||
|
detailed PLUS some special instructions that you will need to follow if you
|
||||||
|
are building a Cortex-M3 toolchain for Cygwin under Windows.
|
||||||
|
|
||||||
|
NOTE: This is an OABI toolchain.
|
||||||
|
|
||||||
|
LEDs
|
||||||
|
^^^^
|
||||||
|
|
||||||
|
If CONFIG_ARCH_LEDS is defined, then support for the LPC1766-STK LEDs will be
|
||||||
|
included in the build. See:
|
||||||
|
|
||||||
|
- configs/olimex-lpc1766stk/include/board.h - Defines LED constants, types and
|
||||||
|
prototypes the LED interface functions.
|
||||||
|
|
||||||
|
- configs/olimex-lpc1766stk/src/lpc1766stk_internal.h - GPIO settings for the LEDs.
|
||||||
|
|
||||||
|
- configs/olimex-lpc1766stk/src/up_leds.c - LED control logic.
|
||||||
|
|
||||||
|
The LPC1766-STK has [tbd] LEDs...
|
||||||
|
If CONFIG_ARCH_LEDS is defined, these LEDs will be controlled as follows for
|
||||||
|
NuttX debug functionality (where NC means "No Change").
|
||||||
|
|
||||||
|
[To be provided]
|
||||||
|
|
||||||
|
Olimex LPC1766-STK Configuration Options
|
||||||
|
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
|
||||||
|
be set to:
|
||||||
|
|
||||||
|
CONFIG_ARCH=arm
|
||||||
|
|
||||||
|
CONFIG_ARCH_family - For use in C code:
|
||||||
|
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
|
||||||
|
CONFIG_ARCH_architecture - For use in C code:
|
||||||
|
|
||||||
|
CONFIG_ARCH_CORTEXM3=y
|
||||||
|
|
||||||
|
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||||
|
|
||||||
|
CONFIG_ARCH_CHIP=lpc17xx
|
||||||
|
|
||||||
|
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
|
||||||
|
chip:
|
||||||
|
|
||||||
|
CONFIG_ARCH_CHIP_LPC1766=y
|
||||||
|
|
||||||
|
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
|
||||||
|
hence, the board that supports the particular chip or SoC.
|
||||||
|
|
||||||
|
CONFIG_ARCH_BOARD=olimex-lpc1766stk (for the Olimex LPC1766-STK)
|
||||||
|
|
||||||
|
CONFIG_ARCH_BOARD_name - For use in C code
|
||||||
|
|
||||||
|
CONFIG_ARCH_BOARD_LPC1766STK=y
|
||||||
|
|
||||||
|
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
|
||||||
|
of delay loops
|
||||||
|
|
||||||
|
CONFIG_ENDIAN_BIG - define if big endian (default is little
|
||||||
|
endian)
|
||||||
|
|
||||||
|
CONFIG_DRAM_SIZE - Describes the installed DRAM (CPU SRAM in this case):
|
||||||
|
|
||||||
|
CONFIG_DRAM_SIZE=(32*1024) (32Kb)
|
||||||
|
|
||||||
|
There is an additional 32Kb of SRAM in AHB SRAM banks 0 and 1.
|
||||||
|
|
||||||
|
CONFIG_DRAM_START - The start address of installed DRAM
|
||||||
|
|
||||||
|
CONFIG_DRAM_START=0x10000000
|
||||||
|
|
||||||
|
CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||||
|
|
||||||
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||||
|
|
||||||
|
CONFIG_ARCH_IRQPRIO - The LPC17xx supports interrupt prioritization
|
||||||
|
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
|
||||||
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||||
|
have LEDs
|
||||||
|
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||||
|
stack. If defined, this symbol is the size of the interrupt
|
||||||
|
stack in bytes. If not defined, the user task stacks will be
|
||||||
|
used during interrupt handling.
|
||||||
|
|
||||||
|
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||||
|
|
||||||
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||||
|
|
||||||
|
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||||
|
cause a 100 second delay during boot-up. This 100 second delay
|
||||||
|
serves no purpose other than it allows you to calibratre
|
||||||
|
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||||
|
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
|
||||||
|
the delay actually is 100 seconds.
|
||||||
|
|
||||||
|
Individual subsystems can be enabled:
|
||||||
|
|
||||||
|
CONFIG_LPC17_MAINOSC=y
|
||||||
|
CONFIG_LPC17_PLL0=y
|
||||||
|
CONFIG_LPC17_PLL1=n
|
||||||
|
CONFIG_LPC17_ETHERNET=n
|
||||||
|
CONFIG_LPC17_USBHOST=n
|
||||||
|
CONFIG_LPC17_USBOTG=n
|
||||||
|
CONFIG_LPC17_USBDEV=n
|
||||||
|
CONFIG_LPC17_UART0=y
|
||||||
|
CONFIG_LPC17_UART1=n
|
||||||
|
CONFIG_LPC17_UART2=n
|
||||||
|
CONFIG_LPC17_UART3=n
|
||||||
|
CONFIG_LPC17_CAN1=n
|
||||||
|
CONFIG_LPC17_CAN2=n
|
||||||
|
CONFIG_LPC17_SPI=n
|
||||||
|
CONFIG_LPC17_SSP0=n
|
||||||
|
CONFIG_LPC17_SSP1=n
|
||||||
|
CONFIG_LPC17_I2C0=n
|
||||||
|
CONFIG_LPC17_I2C1=n
|
||||||
|
CONFIG_LPC17_I2S=n
|
||||||
|
CONFIG_LPC17_TMR0=n
|
||||||
|
CONFIG_LPC17_TMR1=n
|
||||||
|
CONFIG_LPC17_TMR2=n
|
||||||
|
CONFIG_LPC17_TMR3=n
|
||||||
|
CONFIG_LPC17_RIT=n
|
||||||
|
CONFIG_LPC17_PWM=n
|
||||||
|
CONFIG_LPC17_MCPWM=n
|
||||||
|
CONFIG_LPC17_QEI=n
|
||||||
|
CONFIG_LPC17_RTC=n
|
||||||
|
CONFIG_LPC17_WDT=n
|
||||||
|
CONFIG_LPC17_ADC=n
|
||||||
|
CONFIG_LPC17_DAC=n
|
||||||
|
CONFIG_LPC17_GPDMA=n
|
||||||
|
CONFIG_LPC17_FLASH=n
|
||||||
|
|
||||||
|
LPC17xx specific device driver settings
|
||||||
|
|
||||||
|
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||||
|
console and ttys0 (default is the UART0).
|
||||||
|
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||||
|
This specific the size of the receive buffer
|
||||||
|
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||||
|
being sent. This specific the size of the transmit buffer
|
||||||
|
CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||||
|
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||||
|
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||||
|
CONFIG_UARTn_2STOP - Two stop bits
|
||||||
|
|
||||||
|
LPC17xx USB Configuration
|
||||||
|
|
||||||
|
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
|
||||||
|
Handle USB Start-Of-Frame events.
|
||||||
|
Enable reading SOF from interrupt handler vs. simply reading on demand.
|
||||||
|
Probably a bad idea... Unless there is some issue with sampling the SOF
|
||||||
|
from hardware asynchronously.
|
||||||
|
CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
|
||||||
|
Enable high priority interrupts. I have no idea why you might want to
|
||||||
|
do that
|
||||||
|
CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
|
||||||
|
Number of DMA descriptors to allocate in SRAM.
|
||||||
|
CONFIG_LPC17_USBDEV_DMA
|
||||||
|
Enable lpc17xx-specific DMA support
|
||||||
|
|
||||||
|
Configurations
|
||||||
|
^^^^^^^^^^^^^^
|
||||||
|
|
||||||
|
Each Olimex LPC1766-STK configuration is maintained in a
|
||||||
|
sudirectory and can be selected as follow:
|
||||||
|
|
||||||
|
cd tools
|
||||||
|
./configure.sh olimex-lpc1766stk/<subdir>
|
||||||
|
cd -
|
||||||
|
. ./setenv.sh
|
||||||
|
|
||||||
|
Where <subdir> is one of the following:
|
||||||
|
|
||||||
|
nsh:
|
||||||
|
Configures the NuttShell (nsh) located at examples/nsh. The
|
||||||
|
Configuration enables only the serial NSH interfaces.
|
||||||
|
|
||||||
|
ostest:
|
||||||
|
This configuration directory, performs a simple OS test using
|
||||||
|
examples/ostest.
|
||||||
|
|
||||||
|
usbserial:
|
||||||
|
This configuration directory exercises the USB serial class
|
||||||
|
driver at examples/usbserial. See examples/README.txt for
|
||||||
|
more information.
|
||||||
|
|
||||||
|
usbstorage:
|
||||||
|
This configuration directory exercises the USB mass storage
|
||||||
|
class driver at examples/usbstorage. See examples/README.txt for
|
||||||
|
more information.
|
||||||
|
|
||||||
211
configs/olimex-lpc1766stk/include/board.h
Executable file
211
configs/olimex-lpc1766stk/include/board.h
Executable file
@ -0,0 +1,211 @@
|
|||||||
|
/************************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/include/board.h
|
||||||
|
* include/arch/board/board.h
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ARCH_BOARD_BOARD_H
|
||||||
|
#define __ARCH_BOARD_BOARD_H
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Definitions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/* Clocking *************************************************************************/
|
||||||
|
#warning "Review -- these settings are for the Nucleus2G board */
|
||||||
|
/* NOTE: The following definitions require lpc17_syscon.h. It is not included here
|
||||||
|
* because the including C file may not have that file in its include path.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
|
||||||
|
#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
|
||||||
|
#define BOARD_RTCCLK_FREQUENCY (32000) /* RTC oscillator frequency */
|
||||||
|
#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
|
||||||
|
|
||||||
|
/* This is the clock setup we configure for:
|
||||||
|
*
|
||||||
|
* SYSCLK = BOARD_OSCCLK_FREQUENCY = 12MHz -> Select Main oscillator for source
|
||||||
|
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz -> PLL0 multipler=20, pre-divider=1
|
||||||
|
* CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define LPC17_CCLK 80000000 /* 80Mhz*/
|
||||||
|
|
||||||
|
/* Select the main oscillator as the frequency source. SYSCLK is then the frequency
|
||||||
|
* of the main osciallator.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#undef CONFIG_LPC17_MAINOSC
|
||||||
|
#define CONFIG_LPC17_MAINOSC 1
|
||||||
|
#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
|
||||||
|
|
||||||
|
/* Select the main oscillator and CCLK divider. The output of the divider is CCLK.
|
||||||
|
* The input to the divider (PLLCLK) will be determined by the PLL output.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define BOARD_CCLKCFG_DIVIDER 6
|
||||||
|
#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
|
||||||
|
|
||||||
|
/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
|
||||||
|
*
|
||||||
|
* Source clock: Main oscillator
|
||||||
|
* PLL0 Multiplier value (M): 20
|
||||||
|
* PLL0 Pre-divider value (N): 1
|
||||||
|
*/
|
||||||
|
|
||||||
|
#undef CONFIG_LPC17_PLL0
|
||||||
|
#define CONFIG_LPC17_PLL0 1
|
||||||
|
#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
|
||||||
|
|
||||||
|
#define BOARD_PLL0CFG_MSEL 20
|
||||||
|
#define BOARD_PLL0CFG_NSEL 1
|
||||||
|
#define BOARD_PLL0CFG_VALUE \
|
||||||
|
(((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
|
||||||
|
((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
|
||||||
|
|
||||||
|
/* PLL1 -- Not used. */
|
||||||
|
|
||||||
|
#undef CONFIG_LPC17_PLL1
|
||||||
|
#define BOARD_PLL1CFG_MSEL 36
|
||||||
|
#define BOARD_PLL1CFG_NSEL 1
|
||||||
|
#define BOARD_PLL1CFG_VALUE \
|
||||||
|
(((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
|
||||||
|
((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
|
||||||
|
|
||||||
|
/* USB divider. This divder is used when PLL1 is not enabled to get the USB clock
|
||||||
|
* from PLL0:
|
||||||
|
*
|
||||||
|
* USBCLK = PLL0CLK / 10 = 48MHz
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
|
||||||
|
|
||||||
|
/* FLASH Configuration */
|
||||||
|
|
||||||
|
#undef CONFIG_LP17_FLASH
|
||||||
|
#define CONFIG_LP17_FLASH 1
|
||||||
|
#define BOARD_FLASHCFG_VALUE 0x0000303a
|
||||||
|
|
||||||
|
/* LED definitions ******************************************************************/
|
||||||
|
|
||||||
|
#define LED_STARTED 0
|
||||||
|
#define LED_HEAPALLOCATE 1
|
||||||
|
#define LED_IRQSENABLED 2
|
||||||
|
#define LED_STACKCREATED 3
|
||||||
|
#define LED_INIRQ 4
|
||||||
|
#define LED_SIGNAL 5
|
||||||
|
#define LED_ASSERTION 6
|
||||||
|
#define LED_PANIC 7
|
||||||
|
|
||||||
|
/* Alternate pin selections *********************************************************/
|
||||||
|
#warning "Review -- these are for the Nucleus2G board */
|
||||||
|
/* UART1 -- Not connected */
|
||||||
|
|
||||||
|
#define GPIO_UART1_TXD GPIO_UART1_TXD_1
|
||||||
|
#define GPIO_UART1_RXD GPIO_UART1_RXD_1
|
||||||
|
#define GPIO_UART1_CTS GPIO_UART1_CTS_1
|
||||||
|
#define GPIO_UART1_DCD GPIO_UART1_DCD_1
|
||||||
|
#define GPIO_UART1_DSR GPIO_UART1_DSR_1
|
||||||
|
#define GPIO_UART1_DTR GPIO_UART1_DTR_1
|
||||||
|
#define GPIO_UART1_RI GPIO_UART1_RI_1
|
||||||
|
#define GPIO_UART1_RTS GPIO_UART1_RTS_1
|
||||||
|
|
||||||
|
/* UART2 -- Not connected */
|
||||||
|
|
||||||
|
#define GPIO_UART2_TXD GPIO_UART2_TXD_1
|
||||||
|
#define GPIO_UART2_RXD GPIO_UART2_RXD_1
|
||||||
|
|
||||||
|
/* UART3 -- Not connected */
|
||||||
|
|
||||||
|
#define GPIO_UART3_TXD GPIO_UART3_TXD_1
|
||||||
|
#define GPIO_UART3_RXD GPIO_UART3_RXD_1
|
||||||
|
|
||||||
|
/* Either SPI or SSP0 can drive the MMC/SD slot (SSP0 alternate pin settings are
|
||||||
|
* not connected)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_SSP0_SCK GPIO_SSP0_SCK_1
|
||||||
|
#define GPIO_SSP0_SSEL GPIO_SSP0_SSEL_1
|
||||||
|
#define GPIO_SSP0_MISO GPIO_SSP0_MISO_1
|
||||||
|
#define GPIO_SSP0_MOSI GPIO_SSP0_MOSI_1
|
||||||
|
|
||||||
|
/* SSP1 */
|
||||||
|
|
||||||
|
#define GPIO_SSP1_SCK GPIO_SSP1_SCK_1
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Types
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Data
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
#define EXTERN extern "C"
|
||||||
|
extern "C" {
|
||||||
|
#else
|
||||||
|
#define EXTERN extern
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Function Prototypes
|
||||||
|
************************************************************************************/
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: lpc17_boardinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* All LPC17xx architectures must provide the following entry point. This entry point
|
||||||
|
* is called early in the intitialization -- after all memory has been configured
|
||||||
|
* and mapped but before any devices have been initialized.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
EXTERN void lpc17_boardinitialize(void);
|
||||||
|
|
||||||
|
#undef EXTERN
|
||||||
|
#if defined(__cplusplus)
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* __ASSEMBLY__ */
|
||||||
|
#endif /* __ARCH_BOARD_BOARD_H */
|
||||||
162
configs/olimex-lpc1766stk/nsh/Make.defs
Executable file
162
configs/olimex-lpc1766stk/nsh/Make.defs
Executable file
@ -0,0 +1,162 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/nsh/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
# Setup for the selected toolchain
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
|
||||||
|
# CodeSourcery under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
|
||||||
|
# CodeSourcery under Linux
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_DEVKITARM),y)
|
||||||
|
# devkitARM under Windows
|
||||||
|
CROSSDEV = arm-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
|
||||||
|
# NuttX buildroot under Linux or Cygwin
|
||||||
|
CROSSDEV = arm-elf-
|
||||||
|
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -Os
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define PREPROCESS
|
||||||
|
@echo "CPP: $1->$2"
|
||||||
|
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILEXX
|
||||||
|
@echo "CXX: $1"
|
||||||
|
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
804
configs/olimex-lpc1766stk/nsh/defconfig
Executable file
804
configs/olimex-lpc1766stk/nsh/defconfig
Executable file
@ -0,0 +1,804 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/nsh/defconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# architecture selection
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||||
|
# processor architecture.
|
||||||
|
# CONFIG_ARCH_family - for use in C code. This identifies the
|
||||||
|
# particular chip family that the architecture is implemented
|
||||||
|
# in.
|
||||||
|
# CONFIG_ARCH_architecture - for use in C code. This identifies the
|
||||||
|
# specific architecture within the chip familyl.
|
||||||
|
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||||
|
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||||
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||||
|
# the board that supports the particular chip or SoC.
|
||||||
|
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||||
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||||
|
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||||
|
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||||
|
# CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||||
|
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
|
||||||
|
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||||
|
# stack. If defined, this symbol is the size of the interrupt
|
||||||
|
# stack in bytes. If not defined, the user task stacks will be
|
||||||
|
# used during interrupt handling.
|
||||||
|
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||||
|
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
|
||||||
|
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||||
|
# cause a 100 second delay during boot-up. This 100 second delay
|
||||||
|
# serves no purpose other than it allows you to calibrate
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||||
|
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||||
|
# the delay actually is 100 seconds.
|
||||||
|
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||||
|
#
|
||||||
|
CONFIG_ARCH=arm
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
CONFIG_ARCH_CORTEXM3=y
|
||||||
|
CONFIG_ARCH_CHIP=lpc17xx
|
||||||
|
CONFIG_ARCH_CHIP_LPC1768=y
|
||||||
|
CONFIG_ARCH_BOARD=olimex-lpc1766stk
|
||||||
|
CONFIG_ARCH_BOARD_LPC1766STK=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=7982
|
||||||
|
CONFIG_DRAM_SIZE=(32*1024)
|
||||||
|
CONFIG_DRAM_START=0x10000000
|
||||||
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=n
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_ARCH_BOOTLOADER=n
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_BUTTONS=n
|
||||||
|
CONFIG_ARCH_CALIBRATION=n
|
||||||
|
CONFIG_ARCH_DMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Identify toolchain and linker options
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_CODESOURCERYW=n
|
||||||
|
CONFIG_LPC17_CODESOURCERYL=n
|
||||||
|
CONFIG_LPC17_DEVKITARM=n
|
||||||
|
CONFIG_LPC17_BUILDROOT=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
|
||||||
|
CONFIG_LPC17_ETHERNET=n
|
||||||
|
CONFIG_LPC17_USBHOST=n
|
||||||
|
CONFIG_LPC17_USBOTG=n
|
||||||
|
CONFIG_LPC17_USBDEV=n
|
||||||
|
CONFIG_LPC17_UART0=y
|
||||||
|
CONFIG_LPC17_UART1=n
|
||||||
|
CONFIG_LPC17_UART2=n
|
||||||
|
CONFIG_LPC17_UART3=n
|
||||||
|
CONFIG_LPC17_CAN1=n
|
||||||
|
CONFIG_LPC17_CAN2=n
|
||||||
|
CONFIG_LPC17_SPI=n
|
||||||
|
CONFIG_LPC17_SSP0=y
|
||||||
|
CONFIG_LPC17_SSP1=n
|
||||||
|
CONFIG_LPC17_I2C0=n
|
||||||
|
CONFIG_LPC17_I2C1=n
|
||||||
|
CONFIG_LPC17_I2S=n
|
||||||
|
CONFIG_LPC17_TMR0=n
|
||||||
|
CONFIG_LPC17_TMR1=n
|
||||||
|
CONFIG_LPC17_TMR2=n
|
||||||
|
CONFIG_LPC17_TMR3=n
|
||||||
|
CONFIG_LPC17_RIT=n
|
||||||
|
CONFIG_LPC17_PWM=n
|
||||||
|
CONFIG_LPC17_MCPWM=n
|
||||||
|
CONFIG_LPC17_QEI=n
|
||||||
|
CONFIG_LPC17_RTC=n
|
||||||
|
CONFIG_LPC17_WDT=n
|
||||||
|
CONFIG_LPC17_ADC=n
|
||||||
|
CONFIG_LPC17_DAC=n
|
||||||
|
CONFIG_LPC17_GPDMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx specific serial device driver settings
|
||||||
|
#
|
||||||
|
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||||
|
# console and ttys0 (default is the UART1).
|
||||||
|
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||||
|
# This specific the size of the receive buffer
|
||||||
|
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||||
|
# being sent. This specific the size of the transmit buffer
|
||||||
|
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||||
|
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||||
|
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||||
|
# CONFIG_UARTn_2STOP - Two stop bits
|
||||||
|
#
|
||||||
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||||
|
CONFIG_UART1_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART2_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART3_SERIAL_CONSOLE=n
|
||||||
|
|
||||||
|
CONFIG_UART0_TXBUFSIZE=256
|
||||||
|
CONFIG_UART1_TXBUFSIZE=256
|
||||||
|
CONFIG_UART2_TXBUFSIZE=256
|
||||||
|
CONFIG_UART3_TXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_RXBUFSIZE=256
|
||||||
|
CONFIG_UART1_RXBUFSIZE=256
|
||||||
|
CONFIG_UART2_RXBUFSIZE=256
|
||||||
|
CONFIG_UART3_RXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_BAUD=115200
|
||||||
|
CONFIG_UART2_BAUD=115200
|
||||||
|
CONFIG_UART3_BAUD=115200
|
||||||
|
CONFIG_UART1_BAUD=115200
|
||||||
|
|
||||||
|
CONFIG_UART0_BITS=8
|
||||||
|
CONFIG_UART1_BITS=8
|
||||||
|
CONFIG_UART2_BITS=8
|
||||||
|
CONFIG_UART3_BITS=8
|
||||||
|
|
||||||
|
CONFIG_UART0_PARITY=0
|
||||||
|
CONFIG_UART1_PARITY=0
|
||||||
|
CONFIG_UART2_PARITY=0
|
||||||
|
CONFIG_UART3_PARITY=0
|
||||||
|
|
||||||
|
CONFIG_UART0_2STOP=0
|
||||||
|
CONFIG_UART1_2STOP=0
|
||||||
|
CONFIG_UART2_2STOP=0
|
||||||
|
CONFIG_UART3_2STOP=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# General build options
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||||
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||||
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||||
|
# different loaders using the GNU objcopy program. This option
|
||||||
|
# should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||||
|
#
|
||||||
|
CONFIG_RRLOAD_BINARY=n
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_MOTOROLA_SREC=n
|
||||||
|
CONFIG_RAW_BINARY=n
|
||||||
|
CONFIG_HAVE_LIBM=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# General OS setup
|
||||||
|
#
|
||||||
|
# CONFIG_APP_DIR - Identifies the relative path to the directory
|
||||||
|
# that builds the application to link with NuttX.
|
||||||
|
# CONFIG_DEBUG - enables built-in debug options
|
||||||
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||||
|
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||||
|
# debug symbols (needed for use with a debugger).
|
||||||
|
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||||
|
# regions of memory to allocate from, this specifies the
|
||||||
|
# number of memory regions that the memory manager must
|
||||||
|
# handle and enables the API mm_addregion(start, end);
|
||||||
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||||
|
# time console output
|
||||||
|
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
|
||||||
|
# or TICKS_PER_MSEC=10. This setting may be defined to
|
||||||
|
# inform NuttX that the processor hardware is providing
|
||||||
|
# system timer interrupts at some interrupt interval other
|
||||||
|
# than 10 msec.
|
||||||
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||||
|
# this number of milliseconds; Round robin scheduling can
|
||||||
|
# be disabled by setting this value to zero.
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||||
|
# scheduler to monitor system performance
|
||||||
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||||
|
# task name to save in the TCB. Useful if scheduler
|
||||||
|
# instrumentation is selected. Set to zero to disable.
|
||||||
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||||
|
# Used to initialize the internal time logic.
|
||||||
|
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
|
||||||
|
# You would only need this if you are concerned about accurate
|
||||||
|
# time conversions in the past or in the distant future.
|
||||||
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
|
||||||
|
# would only need this if you are concerned about accurate
|
||||||
|
# time conversion in the distand past. You must also define
|
||||||
|
# CONFIG_GREGORIAN_TIME in order to use Julian time.
|
||||||
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||||
|
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||||
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||||
|
# driver (minimul support)
|
||||||
|
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||||
|
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||||
|
# inheritance on mutexes and semaphores.
|
||||||
|
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||||
|
# inheritance is enabled. It defines the maximum number of
|
||||||
|
# different threads (minus one) that can take counts on a
|
||||||
|
# semaphore with priority inheritance support. This may be
|
||||||
|
# set to zero if priority inheritance is disabled OR if you
|
||||||
|
# are only using semaphores as mutexes (only one holder) OR
|
||||||
|
# if no more than two threads participate using a counting
|
||||||
|
# semaphore.
|
||||||
|
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||||
|
# then this setting is the maximum number of higher priority
|
||||||
|
# threads (minus 1) than can be waiting for another thread
|
||||||
|
# to release a count on a semaphore. This value may be set
|
||||||
|
# to zero if no more than one thread is expected to wait for
|
||||||
|
# a semaphore.
|
||||||
|
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||||
|
# by task_create() when a new task is started. If set, all
|
||||||
|
# files/drivers will appear to be closed in the new task.
|
||||||
|
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||||
|
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||||
|
# when a new task is started. If set, all files/drivers will
|
||||||
|
# appear to be closed in the new task except for stdin, stdout,
|
||||||
|
# and stderr.
|
||||||
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||||
|
# desciptors by task_create() when a new task is started. If
|
||||||
|
# set, all sockets will appear to be closed in the new task.
|
||||||
|
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||||
|
# This format will support execution of NuttX binaries located
|
||||||
|
# in a ROMFS filesystem (see examples/nxflat).
|
||||||
|
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||||
|
# handle delayed processing from interrupt handlers. This feature
|
||||||
|
# is required for some drivers but, if there are not complaints,
|
||||||
|
# can be safely disabled. The worker thread also performs
|
||||||
|
# garbage collection -- completing any delayed memory deallocations
|
||||||
|
# from interrupt handlers. If the worker thread is disabled,
|
||||||
|
# then that clean will be performed by the IDLE thread instead
|
||||||
|
# (which runs at the lowest of priority and may not be appropriate
|
||||||
|
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
|
||||||
|
# is enabled, then the following options can also be used:
|
||||||
|
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
|
||||||
|
# thread. Default: 50
|
||||||
|
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
|
||||||
|
# work in units of microseconds. Default: 50*1000 (50 MS).
|
||||||
|
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
|
||||||
|
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||||
|
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||||
|
# the worker thread. Default: 4
|
||||||
|
#
|
||||||
|
CONFIG_APP_DIR=examples/nsh
|
||||||
|
CONFIG_DEBUG=n
|
||||||
|
CONFIG_DEBUG_VERBOSE=n
|
||||||
|
CONFIG_DEBUG_SYMBOLS=n
|
||||||
|
CONFIG_MM_REGIONS=2
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
CONFIG_START_YEAR=2010
|
||||||
|
CONFIG_START_MONTH=6
|
||||||
|
CONFIG_START_DAY=20
|
||||||
|
CONFIG_GREGORIAN_TIME=n
|
||||||
|
CONFIG_JULIAN_TIME=n
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=n
|
||||||
|
CONFIG_MUTEX_TYPES=n
|
||||||
|
CONFIG_PRIORITY_INHERITANCE=n
|
||||||
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||||
|
CONFIG_SEM_NNESTPRIO=0
|
||||||
|
CONFIG_FDCLONE_DISABLE=n
|
||||||
|
CONFIG_FDCLONE_STDIO=n
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_NXFLAT=n
|
||||||
|
CONFIG_SCHED_WORKQUEUE=n
|
||||||
|
CONFIG_SCHED_WORKPRIORITY=50
|
||||||
|
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||||
|
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||||
|
CONFIG_SIG_SIGWORK=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# The following can be used to disable categories of
|
||||||
|
# APIs supported by the OS. If the compiler supports
|
||||||
|
# weak functions, then it should not be necessary to
|
||||||
|
# disable functions unless you want to restrict usage
|
||||||
|
# of those APIs.
|
||||||
|
#
|
||||||
|
# There are certain dependency relationships in these
|
||||||
|
# features.
|
||||||
|
#
|
||||||
|
# o mq_notify logic depends on signals to awaken tasks
|
||||||
|
# waiting for queues to become full or empty.
|
||||||
|
# o pthread_condtimedwait() depends on signals to wake
|
||||||
|
# up waiting tasks.
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_CLOCK=n
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||||
|
CONFIG_DISABLE_PTHREAD=n
|
||||||
|
CONFIG_DISABLE_SIGNALS=n
|
||||||
|
CONFIG_DISABLE_MQUEUE=n
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=n
|
||||||
|
CONFIG_DISABLE_ENVIRON=n
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Misc libc settings
|
||||||
|
#
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||||
|
# little smaller if we do not support fieldwidthes
|
||||||
|
#
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Allow for architecture optimized implementations
|
||||||
|
#
|
||||||
|
# The architecture can provide optimized versions of the
|
||||||
|
# following to improve system performance
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_MEMCPY=n
|
||||||
|
CONFIG_ARCH_MEMCMP=n
|
||||||
|
CONFIG_ARCH_MEMMOVE=n
|
||||||
|
CONFIG_ARCH_MEMSET=n
|
||||||
|
CONFIG_ARCH_STRCMP=n
|
||||||
|
CONFIG_ARCH_STRCPY=n
|
||||||
|
CONFIG_ARCH_STRNCPY=n
|
||||||
|
CONFIG_ARCH_STRLEN=n
|
||||||
|
CONFIG_ARCH_STRNLEN=n
|
||||||
|
CONFIG_ARCH_BZERO=n
|
||||||
|
CONFIG_ARCH_KMALLOC=n
|
||||||
|
CONFIG_ARCH_KZMALLOC=n
|
||||||
|
CONFIG_ARCH_KFREE=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||||
|
# active tasks. This value must be a power of two.
|
||||||
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||||
|
# of parameters that a task may receive (i.e., maxmum value
|
||||||
|
# of 'argc')
|
||||||
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||||
|
# specific data that can be retained
|
||||||
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||||
|
# descriptors (one for each open)
|
||||||
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||||
|
# can be fopen'ed
|
||||||
|
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||||
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||||
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||||
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# message structures to minimize dynamic allocations
|
||||||
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||||
|
# a fixed payload size given by this settin (does not include
|
||||||
|
# other message structure overhead.
|
||||||
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||||
|
# can be passed to a watchdog handler
|
||||||
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# watchdog structures to minimize dynamic allocations
|
||||||
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||||
|
# timer structures. The system manages a pool of preallocated
|
||||||
|
# timer structures to minimize dynamic allocations. Set to
|
||||||
|
# zero for all dynamic allocations.
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=256
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Filesystem configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_MMCSD_NSLOTS
|
||||||
|
# Number of MMC/SD slots supported by the driver
|
||||||
|
# CONFIG_MMCSD_READONLY
|
||||||
|
# Provide read-only access (default is read/write)
|
||||||
|
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
|
||||||
|
# Default is 20MHz.
|
||||||
|
#
|
||||||
|
CONFIG_MMCSD_NSLOTS=1
|
||||||
|
CONFIG_MMCSD_READONLY=n
|
||||||
|
CONFIG_MMCSD_SPICLOCK=12500000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Block driver buffering
|
||||||
|
#
|
||||||
|
# CONFIG_FS_READAHEAD
|
||||||
|
# Enable read-ahead buffering
|
||||||
|
# CONFIG_FS_WRITEBUFFER
|
||||||
|
# Enable write buffering
|
||||||
|
#
|
||||||
|
CONFIG_FS_READAHEAD=n
|
||||||
|
CONFIG_FS_WRITEBUFFER=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SDIO-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_SDIO_DMA
|
||||||
|
# SDIO driver supports DMA
|
||||||
|
# CONFIG_MMCSD_MMCSUPPORT
|
||||||
|
# Enable support for MMC cards
|
||||||
|
# CONFIG_MMCSD_HAVECARDDETECT
|
||||||
|
# SDIO driver card detection is 100% accurate
|
||||||
|
#
|
||||||
|
CONFIG_SDIO_DMA=n
|
||||||
|
CONFIG_MMCSD_MMCSUPPORT=n
|
||||||
|
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# TCP/IP and UDP support via uIP
|
||||||
|
# CONFIG_NET - Enable or disable all network features
|
||||||
|
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||||
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||||
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||||
|
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||||
|
# CONFIG_NET_TCP - TCP support on or off
|
||||||
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||||
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||||
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||||
|
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||||
|
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||||
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||||
|
# CONFIG_NET_UDP - UDP support on or off
|
||||||
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||||
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||||
|
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||||
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||||
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||||
|
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||||
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||||
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||||
|
# CONFIG_NET_BROADCAST - Broadcast support
|
||||||
|
# CONFIG_NET_LLH_LEN - The link level header length
|
||||||
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||||
|
#
|
||||||
|
CONFIG_NET=n
|
||||||
|
CONFIG_NET_IPv6=n
|
||||||
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||||
|
CONFIG_NET_SOCKOPTS=y
|
||||||
|
CONFIG_NET_BUFSIZE=420
|
||||||
|
CONFIG_NET_TCP=n
|
||||||
|
CONFIG_NET_TCP_CONNS=40
|
||||||
|
CONFIG_NET_MAX_LISTENPORTS=40
|
||||||
|
CONFIG_NET_UDP=n
|
||||||
|
CONFIG_NET_UDP_CHECKSUMS=y
|
||||||
|
#CONFIG_NET_UDP_CONNS=10
|
||||||
|
CONFIG_NET_ICMP=n
|
||||||
|
CONFIG_NET_ICMP_PING=n
|
||||||
|
#CONFIG_NET_PINGADDRCONF=0
|
||||||
|
CONFIG_NET_STATISTICS=y
|
||||||
|
#CONFIG_NET_RECEIVE_WINDOW=
|
||||||
|
#CONFIG_NET_ARPTAB_SIZE=8
|
||||||
|
CONFIG_NET_BROADCAST=n
|
||||||
|
#CONFIG_NET_LLH_LEN=14
|
||||||
|
#CONFIG_NET_FWCACHE_SIZE=2
|
||||||
|
|
||||||
|
#
|
||||||
|
# UIP Network Utilities
|
||||||
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||||
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||||
|
#
|
||||||
|
CONFIG_NET_DHCP_LIGHT=n
|
||||||
|
CONFIG_NET_RESOLV_ENTRIES=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBDEV
|
||||||
|
# Enables USB device support
|
||||||
|
# CONFIG_USBDEV_ISOCHRONOUS
|
||||||
|
# Build in extra support for isochronous endpoints
|
||||||
|
# CONFIG_USBDEV_DUALSPEED
|
||||||
|
# Hardware handles high and full speed operation (USB 2.0)
|
||||||
|
# CONFIG_USBDEV_SELFPOWERED
|
||||||
|
# Will cause USB features to indicate that the device is
|
||||||
|
# self-powered
|
||||||
|
# CONFIG_USBDEV_MAXPOWER
|
||||||
|
# Maximum power consumption in mA
|
||||||
|
# CONFIG_USBDEV_TRACE
|
||||||
|
# Enables USB tracing for debug
|
||||||
|
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||||
|
# Number of trace entries to remember
|
||||||
|
#
|
||||||
|
CONFIG_USBDEV=n
|
||||||
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||||
|
CONFIG_USBDEV_DUALSPEED=n
|
||||||
|
CONFIG_USBDEV_SELFPOWERED=y
|
||||||
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||||
|
CONFIG_USBDEV_MAXPOWER=100
|
||||||
|
CONFIG_USBDEV_TRACE=n
|
||||||
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx USB Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
|
||||||
|
# Handle USB Start-Of-Frame events.
|
||||||
|
# Enable reading SOF from interrupt handler vs. simply reading on demand.
|
||||||
|
# Probably a bad idea... Unless there is some issue with sampling the SOF
|
||||||
|
# from hardware asynchronously.
|
||||||
|
# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
|
||||||
|
# Enable high priority interrupts. I have no idea why you might want to
|
||||||
|
# do that
|
||||||
|
# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
|
||||||
|
# Number of DMA descriptors to allocate in SRAM.
|
||||||
|
# CONFIG_LPC17_USBDEV_DMA
|
||||||
|
# Enable lpc17xx-specific DMA support
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_DMA=n
|
||||||
|
CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
|
||||||
|
CONFIG_LPC17_USBDEV_DMAINTMASK=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSER
|
||||||
|
# Enable compilation of the USB serial driver
|
||||||
|
# CONFIG_USBSER_EPINTIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# interrupt IN operation
|
||||||
|
# CONFIG_USBSER_EPBULKOUT
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk OUT operation
|
||||||
|
# CONFIG_USBSER_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk IN operation
|
||||||
|
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||||
|
# Size of the serial receive/transmit buffers
|
||||||
|
#
|
||||||
|
CONFIG_USBSER=n
|
||||||
|
CONFIG_USBSER_EPINTIN=1
|
||||||
|
CONFIG_USBSER_EPBULKOUT=2
|
||||||
|
CONFIG_USBSER_EPBULKIN=5
|
||||||
|
CONFIG_USBSER_NWRREQS=4
|
||||||
|
CONFIG_USBSER_NRDREQS=4
|
||||||
|
CONFIG_USBSER_VENDORID=0x067b
|
||||||
|
CONFIG_USBSER_PRODUCTID=0x2303
|
||||||
|
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||||
|
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||||
|
CONFIG_USBSER_RXBUFSIZE=512
|
||||||
|
CONFIG_USBSER_TXBUFSIZE=512
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Storage Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSTRG
|
||||||
|
# Enable compilation of the USB storage driver
|
||||||
|
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||||
|
# Max packet size for endpoint 0
|
||||||
|
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoints that support
|
||||||
|
# bulk OUT and IN operations
|
||||||
|
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||||
|
# The size of the buffer in each write/read request. This
|
||||||
|
# value needs to be at least as large as the endpoint
|
||||||
|
# maxpacket and ideally as large as a block device sector.
|
||||||
|
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSTRG_REMOVABLE
|
||||||
|
# Select if the media is removable
|
||||||
|
#
|
||||||
|
CONFIG_USBSTRG=n
|
||||||
|
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||||
|
CONFIG_USBSTRG_EPBULKOUT=2
|
||||||
|
CONFIG_USBSTRG_EPBULKIN=5
|
||||||
|
CONFIG_USBSTRG_NRDREQS=2
|
||||||
|
CONFIG_USBSTRG_NWRREQS=2
|
||||||
|
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||||
|
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||||
|
CONFIG_USBSTRG_VENDORID=0x584e
|
||||||
|
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||||
|
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||||
|
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||||
|
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||||
|
CONFIG_USBSTRG_REMOVABLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/uip
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nettest
|
||||||
|
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/ostest
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nsh
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||||
|
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||||
|
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||||
|
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||||
|
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||||
|
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
|
||||||
|
# specific initialization (nsh_archinitialize()).
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||||
|
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||||
|
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||||
|
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||||
|
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||||
|
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||||
|
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||||
|
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ARCHINIT=y
|
||||||
|
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||||
|
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||||
|
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||||
|
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||||
|
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture-specific NSH options
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/usbserial
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_INONLY
|
||||||
|
# Only verify IN (device-to-host) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
||||||
|
# Only verify OUT (host-to-device) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
||||||
|
# Send only small, single packet messages. Default: Send large and small.
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
||||||
|
# Send only large, multi-packet messages. Default: Send large and small.
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||||
|
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||||
|
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||||
|
# (should also be =n for the LPC17xx which always runs from flash)
|
||||||
|
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||||
|
# but copy themselves entirely into RAM for better performance.
|
||||||
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||||
|
# all stack operations outside of the nuttx model.
|
||||||
|
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||||
|
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||||
|
# This is the thread that (1) performs the inital boot of the system up
|
||||||
|
# to the point where user_start() is spawned, and (2) there after is the
|
||||||
|
# IDLE thread that executes only when there is no other thread ready to
|
||||||
|
# run.
|
||||||
|
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||||
|
# for the main user thread that begins at the user_start() entry point.
|
||||||
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||||
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||||
|
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||||
|
# CONFIG_HEAP_SIZE - The size of the heap
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=n
|
||||||
|
CONFIG_BOOT_COPYTORAM=n
|
||||||
|
CONFIG_CUSTOM_STACK=n
|
||||||
|
CONFIG_STACK_POINTER=
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
CONFIG_HEAP_BASE=
|
||||||
|
CONFIG_HEAP_SIZE=
|
||||||
109
configs/olimex-lpc1766stk/nsh/ld.script
Executable file
109
configs/olimex-lpc1766stk/nsh/ld.script
Executable file
@ -0,0 +1,109 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/nsh/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
|
||||||
|
* 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
|
||||||
|
* 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
|
||||||
|
* 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
|
||||||
|
* into the 32Kb CPU SRAM address range.
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
|
||||||
|
sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.); /* See below */
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.ARM.exidx : {
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.bss : { /* BSS */
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
47
configs/olimex-lpc1766stk/nsh/setenv.sh
Executable file
47
configs/olimex-lpc1766stk/nsh/setenv.sh
Executable file
@ -0,0 +1,47 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/olimex-lpc1766stk/nsh/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
|
||||||
|
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
162
configs/olimex-lpc1766stk/ostest/Make.defs
Executable file
162
configs/olimex-lpc1766stk/ostest/Make.defs
Executable file
@ -0,0 +1,162 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/ostest/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
# Setup for the selected toolchain
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
|
||||||
|
# CodeSourcery under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
|
||||||
|
# CodeSourcery under Linux
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_DEVKITARM),y)
|
||||||
|
# devkitARM under Windows
|
||||||
|
CROSSDEV = arm-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
|
||||||
|
# NuttX buildroot under Linux or Cygwin
|
||||||
|
CROSSDEV = arm-elf-
|
||||||
|
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -Os
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define PREPROCESS
|
||||||
|
@echo "CPP: $1->$2"
|
||||||
|
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILEXX
|
||||||
|
@echo "CXX: $1"
|
||||||
|
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
804
configs/olimex-lpc1766stk/ostest/defconfig
Executable file
804
configs/olimex-lpc1766stk/ostest/defconfig
Executable file
@ -0,0 +1,804 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/ostest/defconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# architecture selection
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||||
|
# processor architecture.
|
||||||
|
# CONFIG_ARCH_family - for use in C code. This identifies the
|
||||||
|
# particular chip family that the architecture is implemented
|
||||||
|
# in.
|
||||||
|
# CONFIG_ARCH_architecture - for use in C code. This identifies the
|
||||||
|
# specific architecture within the chip familyl.
|
||||||
|
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||||
|
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||||
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||||
|
# the board that supports the particular chip or SoC.
|
||||||
|
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||||
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||||
|
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||||
|
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||||
|
# CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||||
|
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
|
||||||
|
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||||
|
# stack. If defined, this symbol is the size of the interrupt
|
||||||
|
# stack in bytes. If not defined, the user task stacks will be
|
||||||
|
# used during interrupt handling.
|
||||||
|
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||||
|
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
|
||||||
|
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||||
|
# cause a 100 second delay during boot-up. This 100 second delay
|
||||||
|
# serves no purpose other than it allows you to calibrate
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||||
|
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||||
|
# the delay actually is 100 seconds.
|
||||||
|
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||||
|
#
|
||||||
|
CONFIG_ARCH=arm
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
CONFIG_ARCH_CORTEXM3=y
|
||||||
|
CONFIG_ARCH_CHIP=lpc17xx
|
||||||
|
CONFIG_ARCH_CHIP_LPC1768=y
|
||||||
|
CONFIG_ARCH_BOARD=olimex-lpc1766stk
|
||||||
|
CONFIG_ARCH_BOARD_LPC1766STK=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=7982
|
||||||
|
CONFIG_DRAM_SIZE=(32*1024)
|
||||||
|
CONFIG_DRAM_START=0x10000000
|
||||||
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=n
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_ARCH_BOOTLOADER=n
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_BUTTONS=n
|
||||||
|
CONFIG_ARCH_CALIBRATION=n
|
||||||
|
CONFIG_ARCH_DMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Identify toolchain and linker options
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_CODESOURCERYW=n
|
||||||
|
CONFIG_LPC17_CODESOURCERYL=n
|
||||||
|
CONFIG_LPC17_DEVKITARM=n
|
||||||
|
CONFIG_LPC17_BUILDROOT=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
|
||||||
|
CONFIG_LPC17_ETHERNET=n
|
||||||
|
CONFIG_LPC17_USBHOST=n
|
||||||
|
CONFIG_LPC17_USBOTG=n
|
||||||
|
CONFIG_LPC17_USBDEV=n
|
||||||
|
CONFIG_LPC17_UART0=y
|
||||||
|
CONFIG_LPC17_UART1=n
|
||||||
|
CONFIG_LPC17_UART2=n
|
||||||
|
CONFIG_LPC17_UART3=n
|
||||||
|
CONFIG_LPC17_CAN1=n
|
||||||
|
CONFIG_LPC17_CAN2=n
|
||||||
|
CONFIG_LPC17_SPI=n
|
||||||
|
CONFIG_LPC17_SSP0=n
|
||||||
|
CONFIG_LPC17_SSP1=n
|
||||||
|
CONFIG_LPC17_I2C0=n
|
||||||
|
CONFIG_LPC17_I2C1=n
|
||||||
|
CONFIG_LPC17_I2S=n
|
||||||
|
CONFIG_LPC17_TMR0=n
|
||||||
|
CONFIG_LPC17_TMR1=n
|
||||||
|
CONFIG_LPC17_TMR2=n
|
||||||
|
CONFIG_LPC17_TMR3=n
|
||||||
|
CONFIG_LPC17_RIT=n
|
||||||
|
CONFIG_LPC17_PWM=n
|
||||||
|
CONFIG_LPC17_MCPWM=n
|
||||||
|
CONFIG_LPC17_QEI=n
|
||||||
|
CONFIG_LPC17_RTC=n
|
||||||
|
CONFIG_LPC17_WDT=n
|
||||||
|
CONFIG_LPC17_ADC=n
|
||||||
|
CONFIG_LPC17_DAC=n
|
||||||
|
CONFIG_LPC17_GPDMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx specific serial device driver settings
|
||||||
|
#
|
||||||
|
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||||
|
# console and ttys0 (default is the UART1).
|
||||||
|
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||||
|
# This specific the size of the receive buffer
|
||||||
|
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||||
|
# being sent. This specific the size of the transmit buffer
|
||||||
|
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||||
|
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||||
|
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||||
|
# CONFIG_UARTn_2STOP - Two stop bits
|
||||||
|
#
|
||||||
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||||
|
CONFIG_UART1_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART2_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART3_SERIAL_CONSOLE=n
|
||||||
|
|
||||||
|
CONFIG_UART0_TXBUFSIZE=256
|
||||||
|
CONFIG_UART1_TXBUFSIZE=256
|
||||||
|
CONFIG_UART2_TXBUFSIZE=256
|
||||||
|
CONFIG_UART3_TXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_RXBUFSIZE=256
|
||||||
|
CONFIG_UART1_RXBUFSIZE=256
|
||||||
|
CONFIG_UART2_RXBUFSIZE=256
|
||||||
|
CONFIG_UART3_RXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_BAUD=115200
|
||||||
|
CONFIG_UART2_BAUD=115200
|
||||||
|
CONFIG_UART3_BAUD=115200
|
||||||
|
CONFIG_UART1_BAUD=115200
|
||||||
|
|
||||||
|
CONFIG_UART0_BITS=8
|
||||||
|
CONFIG_UART1_BITS=8
|
||||||
|
CONFIG_UART2_BITS=8
|
||||||
|
CONFIG_UART3_BITS=8
|
||||||
|
|
||||||
|
CONFIG_UART0_PARITY=0
|
||||||
|
CONFIG_UART1_PARITY=0
|
||||||
|
CONFIG_UART2_PARITY=0
|
||||||
|
CONFIG_UART3_PARITY=0
|
||||||
|
|
||||||
|
CONFIG_UART0_2STOP=0
|
||||||
|
CONFIG_UART1_2STOP=0
|
||||||
|
CONFIG_UART2_2STOP=0
|
||||||
|
CONFIG_UART3_2STOP=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# General build options
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||||
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||||
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||||
|
# different loaders using the GNU objcopy program. This option
|
||||||
|
# should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||||
|
#
|
||||||
|
CONFIG_RRLOAD_BINARY=n
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_MOTOROLA_SREC=n
|
||||||
|
CONFIG_RAW_BINARY=n
|
||||||
|
CONFIG_HAVE_LIBM=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# General OS setup
|
||||||
|
#
|
||||||
|
# CONFIG_APP_DIR - Identifies the relative path to the directory
|
||||||
|
# that builds the application to link with NuttX.
|
||||||
|
# CONFIG_DEBUG - enables built-in debug options
|
||||||
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||||
|
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||||
|
# debug symbols (needed for use with a debugger).
|
||||||
|
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||||
|
# regions of memory to allocate from, this specifies the
|
||||||
|
# number of memory regions that the memory manager must
|
||||||
|
# handle and enables the API mm_addregion(start, end);
|
||||||
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||||
|
# time console output
|
||||||
|
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
|
||||||
|
# or TICKS_PER_MSEC=10. This setting may be defined to
|
||||||
|
# inform NuttX that the processor hardware is providing
|
||||||
|
# system timer interrupts at some interrupt interval other
|
||||||
|
# than 10 msec.
|
||||||
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||||
|
# this number of milliseconds; Round robin scheduling can
|
||||||
|
# be disabled by setting this value to zero.
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||||
|
# scheduler to monitor system performance
|
||||||
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||||
|
# task name to save in the TCB. Useful if scheduler
|
||||||
|
# instrumentation is selected. Set to zero to disable.
|
||||||
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||||
|
# Used to initialize the internal time logic.
|
||||||
|
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
|
||||||
|
# You would only need this if you are concerned about accurate
|
||||||
|
# time conversions in the past or in the distant future.
|
||||||
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
|
||||||
|
# would only need this if you are concerned about accurate
|
||||||
|
# time conversion in the distand past. You must also define
|
||||||
|
# CONFIG_GREGORIAN_TIME in order to use Julian time.
|
||||||
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||||
|
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||||
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||||
|
# driver (minimul support)
|
||||||
|
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||||
|
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||||
|
# inheritance on mutexes and semaphores.
|
||||||
|
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||||
|
# inheritance is enabled. It defines the maximum number of
|
||||||
|
# different threads (minus one) that can take counts on a
|
||||||
|
# semaphore with priority inheritance support. This may be
|
||||||
|
# set to zero if priority inheritance is disabled OR if you
|
||||||
|
# are only using semaphores as mutexes (only one holder) OR
|
||||||
|
# if no more than two threads participate using a counting
|
||||||
|
# semaphore.
|
||||||
|
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||||
|
# then this setting is the maximum number of higher priority
|
||||||
|
# threads (minus 1) than can be waiting for another thread
|
||||||
|
# to release a count on a semaphore. This value may be set
|
||||||
|
# to zero if no more than one thread is expected to wait for
|
||||||
|
# a semaphore.
|
||||||
|
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||||
|
# by task_create() when a new task is started. If set, all
|
||||||
|
# files/drivers will appear to be closed in the new task.
|
||||||
|
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||||
|
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||||
|
# when a new task is started. If set, all files/drivers will
|
||||||
|
# appear to be closed in the new task except for stdin, stdout,
|
||||||
|
# and stderr.
|
||||||
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||||
|
# desciptors by task_create() when a new task is started. If
|
||||||
|
# set, all sockets will appear to be closed in the new task.
|
||||||
|
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||||
|
# This format will support execution of NuttX binaries located
|
||||||
|
# in a ROMFS filesystem (see examples/nxflat).
|
||||||
|
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||||
|
# handle delayed processing from interrupt handlers. This feature
|
||||||
|
# is required for some drivers but, if there are not complaints,
|
||||||
|
# can be safely disabled. The worker thread also performs
|
||||||
|
# garbage collection -- completing any delayed memory deallocations
|
||||||
|
# from interrupt handlers. If the worker thread is disabled,
|
||||||
|
# then that clean will be performed by the IDLE thread instead
|
||||||
|
# (which runs at the lowest of priority and may not be appropriate
|
||||||
|
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
|
||||||
|
# is enabled, then the following options can also be used:
|
||||||
|
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
|
||||||
|
# thread. Default: 50
|
||||||
|
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
|
||||||
|
# work in units of microseconds. Default: 50*1000 (50 MS).
|
||||||
|
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
|
||||||
|
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||||
|
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||||
|
# the worker thread. Default: 4
|
||||||
|
#
|
||||||
|
CONFIG_APP_DIR=examples/ostest
|
||||||
|
CONFIG_DEBUG=n
|
||||||
|
CONFIG_DEBUG_VERBOSE=n
|
||||||
|
CONFIG_DEBUG_SYMBOLS=n
|
||||||
|
CONFIG_MM_REGIONS=2
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
CONFIG_START_YEAR=2010
|
||||||
|
CONFIG_START_MONTH=6
|
||||||
|
CONFIG_START_DAY=20
|
||||||
|
CONFIG_GREGORIAN_TIME=n
|
||||||
|
CONFIG_JULIAN_TIME=n
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=y
|
||||||
|
CONFIG_MUTEX_TYPES=n
|
||||||
|
CONFIG_PRIORITY_INHERITANCE=n
|
||||||
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||||
|
CONFIG_SEM_NNESTPRIO=0
|
||||||
|
CONFIG_FDCLONE_DISABLE=n
|
||||||
|
CONFIG_FDCLONE_STDIO=n
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_NXFLAT=n
|
||||||
|
CONFIG_SCHED_WORKQUEUE=n
|
||||||
|
CONFIG_SCHED_WORKPRIORITY=50
|
||||||
|
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||||
|
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||||
|
CONFIG_SIG_SIGWORK=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# The following can be used to disable categories of
|
||||||
|
# APIs supported by the OS. If the compiler supports
|
||||||
|
# weak functions, then it should not be necessary to
|
||||||
|
# disable functions unless you want to restrict usage
|
||||||
|
# of those APIs.
|
||||||
|
#
|
||||||
|
# There are certain dependency relationships in these
|
||||||
|
# features.
|
||||||
|
#
|
||||||
|
# o mq_notify logic depends on signals to awaken tasks
|
||||||
|
# waiting for queues to become full or empty.
|
||||||
|
# o pthread_condtimedwait() depends on signals to wake
|
||||||
|
# up waiting tasks.
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_CLOCK=n
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||||
|
CONFIG_DISABLE_PTHREAD=n
|
||||||
|
CONFIG_DISABLE_SIGNALS=n
|
||||||
|
CONFIG_DISABLE_MQUEUE=n
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Misc libc settings
|
||||||
|
#
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||||
|
# little smaller if we do not support fieldwidthes
|
||||||
|
#
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Allow for architecture optimized implementations
|
||||||
|
#
|
||||||
|
# The architecture can provide optimized versions of the
|
||||||
|
# following to improve system performance
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_MEMCPY=n
|
||||||
|
CONFIG_ARCH_MEMCMP=n
|
||||||
|
CONFIG_ARCH_MEMMOVE=n
|
||||||
|
CONFIG_ARCH_MEMSET=n
|
||||||
|
CONFIG_ARCH_STRCMP=n
|
||||||
|
CONFIG_ARCH_STRCPY=n
|
||||||
|
CONFIG_ARCH_STRNCPY=n
|
||||||
|
CONFIG_ARCH_STRLEN=n
|
||||||
|
CONFIG_ARCH_STRNLEN=n
|
||||||
|
CONFIG_ARCH_BZERO=n
|
||||||
|
CONFIG_ARCH_KMALLOC=n
|
||||||
|
CONFIG_ARCH_KZMALLOC=n
|
||||||
|
CONFIG_ARCH_KFREE=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||||
|
# active tasks. This value must be a power of two.
|
||||||
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||||
|
# of parameters that a task may receive (i.e., maxmum value
|
||||||
|
# of 'argc')
|
||||||
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||||
|
# specific data that can be retained
|
||||||
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||||
|
# descriptors (one for each open)
|
||||||
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||||
|
# can be fopen'ed
|
||||||
|
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||||
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||||
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||||
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# message structures to minimize dynamic allocations
|
||||||
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||||
|
# a fixed payload size given by this settin (does not include
|
||||||
|
# other message structure overhead.
|
||||||
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||||
|
# can be passed to a watchdog handler
|
||||||
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# watchdog structures to minimize dynamic allocations
|
||||||
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||||
|
# timer structures. The system manages a pool of preallocated
|
||||||
|
# timer structures to minimize dynamic allocations. Set to
|
||||||
|
# zero for all dynamic allocations.
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=256
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Filesystem configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_MMCSD_NSLOTS
|
||||||
|
# Number of MMC/SD slots supported by the driver
|
||||||
|
# CONFIG_MMCSD_READONLY
|
||||||
|
# Provide read-only access (default is read/write)
|
||||||
|
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
|
||||||
|
# Default is 20MHz.
|
||||||
|
#
|
||||||
|
CONFIG_MMCSD_NSLOTS=1
|
||||||
|
CONFIG_MMCSD_READONLY=n
|
||||||
|
CONFIG_MMCSD_SPICLOCK=12500000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Block driver buffering
|
||||||
|
#
|
||||||
|
# CONFIG_FS_READAHEAD
|
||||||
|
# Enable read-ahead buffering
|
||||||
|
# CONFIG_FS_WRITEBUFFER
|
||||||
|
# Enable write buffering
|
||||||
|
#
|
||||||
|
CONFIG_FS_READAHEAD=n
|
||||||
|
CONFIG_FS_WRITEBUFFER=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SDIO-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_SDIO_DMA
|
||||||
|
# SDIO driver supports DMA
|
||||||
|
# CONFIG_MMCSD_MMCSUPPORT
|
||||||
|
# Enable support for MMC cards
|
||||||
|
# CONFIG_MMCSD_HAVECARDDETECT
|
||||||
|
# SDIO driver card detection is 100% accurate
|
||||||
|
#
|
||||||
|
CONFIG_SDIO_DMA=n
|
||||||
|
CONFIG_MMCSD_MMCSUPPORT=n
|
||||||
|
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# TCP/IP and UDP support via uIP
|
||||||
|
# CONFIG_NET - Enable or disable all network features
|
||||||
|
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||||
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||||
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||||
|
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||||
|
# CONFIG_NET_TCP - TCP support on or off
|
||||||
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||||
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||||
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||||
|
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||||
|
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||||
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||||
|
# CONFIG_NET_UDP - UDP support on or off
|
||||||
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||||
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||||
|
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||||
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||||
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||||
|
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||||
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||||
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||||
|
# CONFIG_NET_BROADCAST - Broadcast support
|
||||||
|
# CONFIG_NET_LLH_LEN - The link level header length
|
||||||
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||||
|
#
|
||||||
|
CONFIG_NET=n
|
||||||
|
CONFIG_NET_IPv6=n
|
||||||
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||||
|
CONFIG_NET_SOCKOPTS=y
|
||||||
|
CONFIG_NET_BUFSIZE=420
|
||||||
|
CONFIG_NET_TCP=n
|
||||||
|
CONFIG_NET_TCP_CONNS=40
|
||||||
|
CONFIG_NET_MAX_LISTENPORTS=40
|
||||||
|
CONFIG_NET_UDP=n
|
||||||
|
CONFIG_NET_UDP_CHECKSUMS=y
|
||||||
|
#CONFIG_NET_UDP_CONNS=10
|
||||||
|
CONFIG_NET_ICMP=n
|
||||||
|
CONFIG_NET_ICMP_PING=n
|
||||||
|
#CONFIG_NET_PINGADDRCONF=0
|
||||||
|
CONFIG_NET_STATISTICS=y
|
||||||
|
#CONFIG_NET_RECEIVE_WINDOW=
|
||||||
|
#CONFIG_NET_ARPTAB_SIZE=8
|
||||||
|
CONFIG_NET_BROADCAST=n
|
||||||
|
#CONFIG_NET_LLH_LEN=14
|
||||||
|
#CONFIG_NET_FWCACHE_SIZE=2
|
||||||
|
|
||||||
|
#
|
||||||
|
# UIP Network Utilities
|
||||||
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||||
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||||
|
#
|
||||||
|
CONFIG_NET_DHCP_LIGHT=n
|
||||||
|
CONFIG_NET_RESOLV_ENTRIES=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBDEV
|
||||||
|
# Enables USB device support
|
||||||
|
# CONFIG_USBDEV_ISOCHRONOUS
|
||||||
|
# Build in extra support for isochronous endpoints
|
||||||
|
# CONFIG_USBDEV_DUALSPEED
|
||||||
|
# Hardware handles high and full speed operation (USB 2.0)
|
||||||
|
# CONFIG_USBDEV_SELFPOWERED
|
||||||
|
# Will cause USB features to indicate that the device is
|
||||||
|
# self-powered
|
||||||
|
# CONFIG_USBDEV_MAXPOWER
|
||||||
|
# Maximum power consumption in mA
|
||||||
|
# CONFIG_USBDEV_TRACE
|
||||||
|
# Enables USB tracing for debug
|
||||||
|
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||||
|
# Number of trace entries to remember
|
||||||
|
#
|
||||||
|
CONFIG_USBDEV=n
|
||||||
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||||
|
CONFIG_USBDEV_DUALSPEED=n
|
||||||
|
CONFIG_USBDEV_SELFPOWERED=y
|
||||||
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||||
|
CONFIG_USBDEV_MAXPOWER=100
|
||||||
|
CONFIG_USBDEV_TRACE=n
|
||||||
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx USB Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
|
||||||
|
# Handle USB Start-Of-Frame events.
|
||||||
|
# Enable reading SOF from interrupt handler vs. simply reading on demand.
|
||||||
|
# Probably a bad idea... Unless there is some issue with sampling the SOF
|
||||||
|
# from hardware asynchronously.
|
||||||
|
# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
|
||||||
|
# Enable high priority interrupts. I have no idea why you might want to
|
||||||
|
# do that
|
||||||
|
# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
|
||||||
|
# Number of DMA descriptors to allocate in SRAM.
|
||||||
|
# CONFIG_LPC17_USBDEV_DMA
|
||||||
|
# Enable lpc17xx-specific DMA support
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_DMA=n
|
||||||
|
CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
|
||||||
|
CONFIG_LPC17_USBDEV_DMAINTMASK=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSER
|
||||||
|
# Enable compilation of the USB serial driver
|
||||||
|
# CONFIG_USBSER_EPINTIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# interrupt IN operation
|
||||||
|
# CONFIG_USBSER_EPBULKOUT
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk OUT operation
|
||||||
|
# CONFIG_USBSER_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk IN operation
|
||||||
|
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||||
|
# Size of the serial receive/transmit buffers
|
||||||
|
#
|
||||||
|
CONFIG_USBSER=n
|
||||||
|
CONFIG_USBSER_EPINTIN=1
|
||||||
|
CONFIG_USBSER_EPBULKOUT=2
|
||||||
|
CONFIG_USBSER_EPBULKIN=5
|
||||||
|
CONFIG_USBSER_NWRREQS=4
|
||||||
|
CONFIG_USBSER_NRDREQS=4
|
||||||
|
CONFIG_USBSER_VENDORID=0x067b
|
||||||
|
CONFIG_USBSER_PRODUCTID=0x2303
|
||||||
|
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||||
|
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||||
|
CONFIG_USBSER_RXBUFSIZE=512
|
||||||
|
CONFIG_USBSER_TXBUFSIZE=512
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Storage Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSTRG
|
||||||
|
# Enable compilation of the USB storage driver
|
||||||
|
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||||
|
# Max packet size for endpoint 0
|
||||||
|
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoints that support
|
||||||
|
# bulk OUT and IN operations
|
||||||
|
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||||
|
# The size of the buffer in each write/read request. This
|
||||||
|
# value needs to be at least as large as the endpoint
|
||||||
|
# maxpacket and ideally as large as a block device sector.
|
||||||
|
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSTRG_REMOVABLE
|
||||||
|
# Select if the media is removable
|
||||||
|
#
|
||||||
|
CONFIG_USBSTRG=n
|
||||||
|
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||||
|
CONFIG_USBSTRG_EPBULKOUT=2
|
||||||
|
CONFIG_USBSTRG_EPBULKIN=5
|
||||||
|
CONFIG_USBSTRG_NRDREQS=2
|
||||||
|
CONFIG_USBSTRG_NWRREQS=2
|
||||||
|
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||||
|
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||||
|
CONFIG_USBSTRG_VENDORID=0x584e
|
||||||
|
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||||
|
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||||
|
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||||
|
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||||
|
CONFIG_USBSTRG_REMOVABLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/uip
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nettest
|
||||||
|
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/ostest
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nsh
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||||
|
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||||
|
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||||
|
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||||
|
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||||
|
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
|
||||||
|
# specific initialization (nsh_archinitialize()).
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||||
|
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||||
|
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||||
|
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||||
|
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||||
|
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||||
|
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||||
|
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ARCHINIT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||||
|
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||||
|
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||||
|
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||||
|
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture-specific NSH options
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/usbserial
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_INONLY
|
||||||
|
# Only verify IN (device-to-host) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
||||||
|
# Only verify OUT (host-to-device) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
||||||
|
# Send only small, single packet messages. Default: Send large and small.
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
||||||
|
# Send only large, multi-packet messages. Default: Send large and small.
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||||
|
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||||
|
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||||
|
# (should also be =n for the LPC17xx which always runs from flash)
|
||||||
|
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||||
|
# but copy themselves entirely into RAM for better performance.
|
||||||
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||||
|
# all stack operations outside of the nuttx model.
|
||||||
|
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||||
|
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||||
|
# This is the thread that (1) performs the inital boot of the system up
|
||||||
|
# to the point where user_start() is spawned, and (2) there after is the
|
||||||
|
# IDLE thread that executes only when there is no other thread ready to
|
||||||
|
# run.
|
||||||
|
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||||
|
# for the main user thread that begins at the user_start() entry point.
|
||||||
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||||
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||||
|
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||||
|
# CONFIG_HEAP_SIZE - The size of the heap
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=n
|
||||||
|
CONFIG_BOOT_COPYTORAM=n
|
||||||
|
CONFIG_CUSTOM_STACK=n
|
||||||
|
CONFIG_STACK_POINTER=
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
CONFIG_HEAP_BASE=
|
||||||
|
CONFIG_HEAP_SIZE=
|
||||||
109
configs/olimex-lpc1766stk/ostest/ld.script
Executable file
109
configs/olimex-lpc1766stk/ostest/ld.script
Executable file
@ -0,0 +1,109 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/ostest/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
|
||||||
|
* 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
|
||||||
|
* 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
|
||||||
|
* 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
|
||||||
|
* into the 32Kb CPU SRAM address range.
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
|
||||||
|
sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.); /* See below */
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.ARM.exidx : {
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.bss : { /* BSS */
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
47
configs/olimex-lpc1766stk/ostest/setenv.sh
Executable file
47
configs/olimex-lpc1766stk/ostest/setenv.sh
Executable file
@ -0,0 +1,47 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/olimex-lpc1766stk/ostest/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
|
||||||
|
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
90
configs/olimex-lpc1766stk/src/Makefile
Executable file
90
configs/olimex-lpc1766stk/src/Makefile
Executable file
@ -0,0 +1,90 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/src/Makefile
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
-include $(TOPDIR)/Make.defs
|
||||||
|
|
||||||
|
CFLAGS += -I$(TOPDIR)/sched
|
||||||
|
|
||||||
|
ASRCS =
|
||||||
|
CSRCS = up_boot.c up_leds.c up_ssp.c
|
||||||
|
ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y)
|
||||||
|
CSRCS += up_nsh.c
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_APP_DIR),examples/usbstorage)
|
||||||
|
CSRCS += up_usbstrg.c
|
||||||
|
endif
|
||||||
|
|
||||||
|
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||||
|
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||||
|
|
||||||
|
SRCS = $(ASRCS) $(CSRCS)
|
||||||
|
OBJS = $(AOBJS) $(COBJS)
|
||||||
|
|
||||||
|
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||||
|
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||||
|
-I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
|
||||||
|
else
|
||||||
|
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
|
||||||
|
endif
|
||||||
|
|
||||||
|
all: libboard$(LIBEXT)
|
||||||
|
|
||||||
|
$(AOBJS): %$(OBJEXT): %.S
|
||||||
|
$(call ASSEMBLE, $<, $@)
|
||||||
|
|
||||||
|
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||||
|
$(call COMPILE, $<, $@)
|
||||||
|
|
||||||
|
libboard$(LIBEXT): $(OBJS)
|
||||||
|
@( for obj in $(OBJS) ; do \
|
||||||
|
$(call ARCHIVE, $@, $${obj}); \
|
||||||
|
done ; )
|
||||||
|
|
||||||
|
.depend: Makefile $(SRCS)
|
||||||
|
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||||
|
@touch $@
|
||||||
|
|
||||||
|
depend: .depend
|
||||||
|
|
||||||
|
clean:
|
||||||
|
@rm -f libboard$(LIBEXT) *~ .*.swp
|
||||||
|
$(call CLEAN)
|
||||||
|
|
||||||
|
distclean: clean
|
||||||
|
@rm -f Make.dep .depend
|
||||||
|
|
||||||
|
-include Make.dep
|
||||||
83
configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
Executable file
83
configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
Executable file
@ -0,0 +1,83 @@
|
|||||||
|
/************************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/src/lpc1766stk_internal.h
|
||||||
|
* arch/arm/src/board/lpc1766stk_internal.n
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
||||||
|
#define _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
#include <nuttx/compiler.h>
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Definitions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/* LPC1766-STK GPIO Pin Definitions *************************************************/
|
||||||
|
/* Board GPIO Usage:
|
||||||
|
*
|
||||||
|
* [To be provided]
|
||||||
|
*/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Types
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public data
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifndef __ASSEMBLY__
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: lpc17_sspinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Called to configure SPI chip select GPIO pins for the Olimex LPC1766-STK board.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
extern void weak_function lpc17_sspinitialize(void);
|
||||||
|
|
||||||
|
#endif /* __ASSEMBLY__ */
|
||||||
|
#endif /* _CONFIGS_OLIMEX_LPC1766STK_SRC_LPC1766STK_INTERNAL_H */
|
||||||
|
|
||||||
93
configs/olimex-lpc1766stk/src/up_boot.c
Executable file
93
configs/olimex-lpc1766stk/src/up_boot.c
Executable file
@ -0,0 +1,93 @@
|
|||||||
|
/************************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/src/up_boot.c
|
||||||
|
* arch/arm/src/board/up_boot.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#include "up_arch.h"
|
||||||
|
#include "up_internal.h"
|
||||||
|
|
||||||
|
#include "lpc17_internal.h"
|
||||||
|
#include "lpc1766stk_internal.h"
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Definitions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: lpc17_boardinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* All LPC17xx architectures must provide the following entry point. This entry point
|
||||||
|
* is called early in the intitialization -- after all memory has been configured
|
||||||
|
* and mapped but before any devices have been initialized.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
void lpc17_boardinitialize(void)
|
||||||
|
{
|
||||||
|
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
|
||||||
|
* function lpc17_sspinitialize() has been brought into the link.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP0)
|
||||||
|
if (lpc17_sspinitialize)
|
||||||
|
{
|
||||||
|
lpc17_sspinitialize();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Configure on-board LEDs if LED support has been selected. */
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_LEDS
|
||||||
|
up_ledinit();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
134
configs/olimex-lpc1766stk/src/up_leds.c
Executable file
134
configs/olimex-lpc1766stk/src/up_leds.c
Executable file
@ -0,0 +1,134 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/src/up_leds.c
|
||||||
|
* arch/arm/src/board/up_leds.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#include "chip.h"
|
||||||
|
#include "up_arch.h"
|
||||||
|
#include "up_internal.h"
|
||||||
|
|
||||||
|
#include "lpc17_internal.h"
|
||||||
|
|
||||||
|
#include "lpc1766stk_internal.h"
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_LEDS
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Enables debug output from this file (needs CONFIG_DEBUG with
|
||||||
|
* CONFIG_DEBUG_VERBOSE too)
|
||||||
|
*/
|
||||||
|
|
||||||
|
#undef LED_DEBUG /* Define to enable debug */
|
||||||
|
#undef LED_VERBOSE /* Define to enable verbose debug */
|
||||||
|
|
||||||
|
#ifdef LED_DEBUG
|
||||||
|
# define leddbg lldbg
|
||||||
|
# ifdef LED_VERBOSE
|
||||||
|
# define ledvdbg lldbg
|
||||||
|
# else
|
||||||
|
# define ledvdbg(x...)
|
||||||
|
# endif
|
||||||
|
#else
|
||||||
|
# undef LED_VERBOSE
|
||||||
|
# define leddbg(x...)
|
||||||
|
# define ledvdbg(x...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Dump GPIO registers */
|
||||||
|
|
||||||
|
#ifdef LED_VERBOSE
|
||||||
|
# define led_dumpgpio(m) lpc17_dumpgpio(???, m)
|
||||||
|
#else
|
||||||
|
# define led_dumpgpio(m)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: up_ledinit
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void up_ledinit(void)
|
||||||
|
{
|
||||||
|
/* Configure all LED GPIO lines */
|
||||||
|
led_dumpgpio("up_ledinit() Entry)");
|
||||||
|
|
||||||
|
#warning "Not implemented"
|
||||||
|
|
||||||
|
led_dumpgpio("up_ledinit() Exit");
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: up_ledon
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void up_ledon(int led)
|
||||||
|
{
|
||||||
|
#warning "Not implemented"
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: up_ledoff
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void up_ledoff(int led)
|
||||||
|
{
|
||||||
|
#warning "Not implemented"
|
||||||
|
}
|
||||||
|
#endif /* CONFIG_ARCH_LEDS */
|
||||||
155
configs/olimex-lpc1766stk/src/up_nsh.c
Executable file
155
configs/olimex-lpc1766stk/src/up_nsh.c
Executable file
@ -0,0 +1,155 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* config/olimex-lpc1766stk/src/up_nsh.c
|
||||||
|
* arch/arm/src/board/up_nsh.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <errno.h>
|
||||||
|
|
||||||
|
#include <nuttx/spi.h>
|
||||||
|
#include <nuttx/mmcsd.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-Processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Configuration ************************************************************/
|
||||||
|
|
||||||
|
/* PORT and SLOT number probably depend on the board configuration */
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_BOARD_LPC1766STK
|
||||||
|
# define CONFIG_EXAMPLES_NSH_HAVEUSBDEV 1
|
||||||
|
# define CONFIG_EXAMPLES_NSH_HAVEMMCSD 1
|
||||||
|
# if !defined(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO) || CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO != 0
|
||||||
|
# error "The LPC1766-STK MMC/SD is on SSP0"
|
||||||
|
# undef CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO
|
||||||
|
# define CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO 0
|
||||||
|
# endif
|
||||||
|
# if !defined(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO) || CONFIG_EXAMPLES_NSH_MMCSDSLOTNO != 0
|
||||||
|
# error "The LPC1766-STK MMC/SD is only one slot (0)"
|
||||||
|
# undef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
|
||||||
|
# define CONFIG_EXAMPLES_NSH_MMCSDSLOTNO 0
|
||||||
|
# endif
|
||||||
|
# ifndef CONFIG_LPC17_SSP0
|
||||||
|
# warning "CONFIG_LPC17_SSP0 is not enabled"
|
||||||
|
# endif
|
||||||
|
#else
|
||||||
|
# error "Unrecognized board"
|
||||||
|
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
|
||||||
|
# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Can't support USB features if USB is not enabled */
|
||||||
|
|
||||||
|
#ifndef CONFIG_USBDEV
|
||||||
|
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Can't support MMC/SD features if mountpoints are disabled */
|
||||||
|
|
||||||
|
#if defined(CONFIG_DISABLE_MOUNTPOINT)
|
||||||
|
# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_EXAMPLES_NSH_MMCSDMINOR
|
||||||
|
# define CONFIG_EXAMPLES_NSH_MMCSDMINOR 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Debug ********************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||||
|
# ifdef CONFIG_DEBUG
|
||||||
|
# define message(...) lib_lowprintf(__VA_ARGS__)
|
||||||
|
# else
|
||||||
|
# define message(...) printf(__VA_ARGS__)
|
||||||
|
# endif
|
||||||
|
#else
|
||||||
|
# ifdef CONFIG_DEBUG
|
||||||
|
# define message lib_lowprintf
|
||||||
|
# else
|
||||||
|
# define message printf
|
||||||
|
# endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: nsh_archinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform architecture specific initialization
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int nsh_archinitialize(void)
|
||||||
|
{
|
||||||
|
FAR struct spi_dev_s *ssp;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* Get the SSP port */
|
||||||
|
|
||||||
|
ssp = up_spiinitialize(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
|
||||||
|
if (!ssp)
|
||||||
|
{
|
||||||
|
message("nsh_archinitialize: Failed to initialize SSP port %d\n",
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
message("Successfully initialized SSP port %d\n",
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
|
||||||
|
|
||||||
|
/* Bind the SSP port to the slot */
|
||||||
|
|
||||||
|
ret = mmcsd_spislotinitialize(CONFIG_EXAMPLES_NSH_MMCSDMINOR, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, ssp);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
message("nsh_archinitialize: Failed to bind SSP port %d to MMC/SD slot %d: %d\n",
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
message("Successfuly bound SSP port %d to MMC/SD slot %d\n",
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
159
configs/olimex-lpc1766stk/src/up_ssp.c
Executable file
159
configs/olimex-lpc1766stk/src/up_ssp.c
Executable file
@ -0,0 +1,159 @@
|
|||||||
|
/************************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/src/up_ssp.c
|
||||||
|
* arch/arm/src/board/up_ssp.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Included Files
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <nuttx/spi.h>
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#include "up_arch.h"
|
||||||
|
#include "chip.h"
|
||||||
|
#include "lpc17_internal.h"
|
||||||
|
#include "lpc1766stk_internal.h"
|
||||||
|
|
||||||
|
/* The LM3S6965 Eval Kit microSD CS is on SSI0 */
|
||||||
|
|
||||||
|
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Definitions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
|
||||||
|
|
||||||
|
#undef SSP_DEBUG /* Define to enable debug */
|
||||||
|
#undef SSP_VERBOSE /* Define to enable verbose debug */
|
||||||
|
|
||||||
|
#ifdef SSP_DEBUG
|
||||||
|
# define sspdbg lldbg
|
||||||
|
# ifdef SSP_VERBOSE
|
||||||
|
# define sspvdbg lldbg
|
||||||
|
# else
|
||||||
|
# define sspvdbg(x...)
|
||||||
|
# endif
|
||||||
|
#else
|
||||||
|
# undef SSP_VERBOSE
|
||||||
|
# define sspdbg(x...)
|
||||||
|
# define sspvdbg(x...)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Dump GPIO registers */
|
||||||
|
|
||||||
|
#ifdef SSP_VERBOSE
|
||||||
|
# define ssp_dumpgpio(m) lpc17_dumpgpio(SDCCS_GPIO, m)
|
||||||
|
#else
|
||||||
|
# define ssp_dumpgpio(m)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: lpc17_sspinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
void weak_function lpc17_sspinitialize(void)
|
||||||
|
{
|
||||||
|
/* Configure the SPI chip select GPIOs */
|
||||||
|
|
||||||
|
ssp_dumpgpio("lpc17_sspinitialize() Entry)");
|
||||||
|
#warning "Not implemented"
|
||||||
|
ssp_dumpgpio("lpc17_sspinitialize() Exit");
|
||||||
|
}
|
||||||
|
|
||||||
|
/************************************************************************************
|
||||||
|
* Name: lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* The external functions, lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
|
||||||
|
* must be provided by board-specific logic. They are implementations of the select
|
||||||
|
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||||
|
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
|
||||||
|
* are provided by common LPC17xx logic. To use this common SPI logic on your
|
||||||
|
* board:
|
||||||
|
*
|
||||||
|
* 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select
|
||||||
|
* pins.
|
||||||
|
* 2. Provide lpc17_ssp0/ssp1select() and lpc17_ssp0/ssp1status() functions
|
||||||
|
* in your board-specific logic. These functions will perform chip selection
|
||||||
|
* and status operations using GPIOs in the way your board is configured.
|
||||||
|
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||||
|
* initialization logic
|
||||||
|
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||||
|
* SPI driver to higher level logic (e.g., calling
|
||||||
|
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||||
|
* the SPI MMC/SD driver).
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_LPC17_SSP0
|
||||||
|
void lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||||
|
{
|
||||||
|
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||||
|
ssp_dumpgpio("lpc17_spiselect() Entry");
|
||||||
|
#warning "Not implemented"
|
||||||
|
ssp_dumpgpio("lpc17_spiselect() Exit");
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||||
|
{
|
||||||
|
sspdbg("Returning SPI_STATUS_PRESENT\n");
|
||||||
|
return SPI_STATUS_PRESENT;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_LPC17_SSP1
|
||||||
|
# warning "SSP1 chip selects not known"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* CONFIG_LPC17_SSP0 || CONFIG_LPC17_SSP1 */
|
||||||
143
configs/olimex-lpc1766stk/src/up_usbstrg.c
Executable file
143
configs/olimex-lpc1766stk/src/up_usbstrg.c
Executable file
@ -0,0 +1,143 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/src/up_usbstrg.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Configure and register the LPC17xx MMC/SD SPI block driver.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <errno.h>
|
||||||
|
|
||||||
|
#include <nuttx/spi.h>
|
||||||
|
#include <nuttx/mmcsd.h>
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-Processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* Configuration ************************************************************/
|
||||||
|
|
||||||
|
#ifndef CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
|
||||||
|
# define CONFIG_EXAMPLES_USBSTRG_DEVMINOR1 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* PORT and SLOT number probably depend on the board configuration */
|
||||||
|
|
||||||
|
#ifdef CONFIG_ARCH_BOARD_LPC1766STK
|
||||||
|
# undef LPC17XX_MMCSDSPIPORTNO
|
||||||
|
# define LPC17XX_MMCSDSPIPORTNO 1
|
||||||
|
# undef LPC17XX_MMCSDSLOTNO
|
||||||
|
# define LPC17XX_MMCSDSLOTNO 0
|
||||||
|
#else
|
||||||
|
/* Add configuration for new LPC17xx boards here */
|
||||||
|
# error "Unrecognized LPC17xx board"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Debug ********************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||||
|
# ifdef CONFIG_DEBUG
|
||||||
|
# define message(...) lib_lowprintf(__VA_ARGS__)
|
||||||
|
# define msgflush()
|
||||||
|
# else
|
||||||
|
# define message(...) printf(__VA_ARGS__)
|
||||||
|
# define msgflush() fflush(stdout)
|
||||||
|
# endif
|
||||||
|
#else
|
||||||
|
# ifdef CONFIG_DEBUG
|
||||||
|
# define message lib_lowprintf
|
||||||
|
# define msgflush()
|
||||||
|
# else
|
||||||
|
# define message printf
|
||||||
|
# define msgflush() fflush(stdout)
|
||||||
|
# endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: usbstrg_archinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Perform architecture specific initialization
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int usbstrg_archinitialize(void)
|
||||||
|
{
|
||||||
|
FAR struct spi_dev_s *spi;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
/* Get the SPI port */
|
||||||
|
|
||||||
|
message("usbstrg_archinitialize: Initializing SPI port %d\n",
|
||||||
|
LPC17XX_MMCSDSPIPORTNO);
|
||||||
|
|
||||||
|
spi = up_spiinitialize(1);
|
||||||
|
if (!spi)
|
||||||
|
{
|
||||||
|
message("usbstrg_archinitialize: Failed to initialize SPI port %d\n",
|
||||||
|
LPC17XX_MMCSDSPIPORTNO);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
message("usbstrg_archinitialize: Successfully initialized SPI port %d\n",
|
||||||
|
LPC17XX_MMCSDSPIPORTNO);
|
||||||
|
|
||||||
|
/* Bind the SPI port to the slot */
|
||||||
|
|
||||||
|
message("usbstrg_archinitialize: Binding SPI port %d to MMC/SD slot %d\n",
|
||||||
|
LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
|
||||||
|
|
||||||
|
ret = mmcsd_spislotinitialize(CONFIG_EXAMPLES_USBSTRG_DEVMINOR1, LPC17XX_MMCSDSLOTNO, spi);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
message("usbstrg_archinitialize: Failed to bind SPI port %d to MMC/SD slot %d: %d\n",
|
||||||
|
LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO, ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
message("usbstrg_archinitialize: Successfuly bound SPI port %d to MMC/SD slot %d\n",
|
||||||
|
LPC17XX_MMCSDSPIPORTNO, LPC17XX_MMCSDSLOTNO);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
61
configs/olimex-lpc1766stk/tools/olimex.cfg
Executable file
61
configs/olimex-lpc1766stk/tools/olimex.cfg
Executable file
@ -0,0 +1,61 @@
|
|||||||
|
#daemon configuration
|
||||||
|
telnet_port 4444
|
||||||
|
gdb_port 3333
|
||||||
|
|
||||||
|
#interface
|
||||||
|
interface ft2232
|
||||||
|
ft2232_device_desc "Olimex OpenOCD JTAG A"
|
||||||
|
ft2232_layout "olimex-jtag"
|
||||||
|
ft2232_vid_pid 0x15BA 0x0003
|
||||||
|
|
||||||
|
# NXP LPC1768 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, clocked with 4MHz internal RC oscillator
|
||||||
|
|
||||||
|
if { [info exists CHIPNAME] } {
|
||||||
|
set _CHIPNAME $CHIPNAME
|
||||||
|
} else {
|
||||||
|
set _CHIPNAME lpc1768
|
||||||
|
}
|
||||||
|
|
||||||
|
if { [info exists ENDIAN] } {
|
||||||
|
set _ENDIAN $ENDIAN
|
||||||
|
} else {
|
||||||
|
set _ENDIAN little
|
||||||
|
}
|
||||||
|
|
||||||
|
if { [info exists CPUTAPID ] } {
|
||||||
|
set _CPUTAPID $CPUTAPID
|
||||||
|
} else {
|
||||||
|
set _CPUTAPID 0x4ba00477
|
||||||
|
}
|
||||||
|
|
||||||
|
#delays on reset lines
|
||||||
|
jtag_nsrst_delay 200
|
||||||
|
jtag_ntrst_delay 200
|
||||||
|
|
||||||
|
# LPC2000 & LPC1700 -> SRST causes TRST
|
||||||
|
reset_config trst_and_srst srst_pulls_trst
|
||||||
|
|
||||||
|
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
|
||||||
|
|
||||||
|
set _TARGETNAME $_CHIPNAME.cpu
|
||||||
|
target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
|
||||||
|
|
||||||
|
# LPC1768 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
|
||||||
|
$_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size 0x8000 -work-area-backup 0
|
||||||
|
|
||||||
|
# REVISIT is there any good reason to have this reset-init event handler??
|
||||||
|
# Normally they should set up (board-specific) clocking then probe the flash...
|
||||||
|
$_TARGETNAME configure -event reset-init {
|
||||||
|
# Force NVIC.VTOR to point to flash at 0 ...
|
||||||
|
# WHY? This is it's reset value; we run right after reset!!
|
||||||
|
mwb 0xE000ED08 0x00
|
||||||
|
}
|
||||||
|
|
||||||
|
# LPC1768 has 512kB of user-available FLASH (bootloader is located in separate dedicated region).
|
||||||
|
# flash bank lpc1700 <base> <size> 0 0 <target#> <variant> <cclk> [calc_checksum]
|
||||||
|
|
||||||
|
set _FLASHNAME $_CHIPNAME.flash
|
||||||
|
flash bank $_FLASHNAME lpc2000 0x0 0x80000 0 0 $_TARGETNAME lpc1700 80000 calc_checksum
|
||||||
|
|
||||||
|
# 4MHz / 6 = 666kHz, so use 500
|
||||||
|
jtag_khz 100
|
||||||
42
configs/olimex-lpc1766stk/tools/oocd.sh
Executable file
42
configs/olimex-lpc1766stk/tools/oocd.sh
Executable file
@ -0,0 +1,42 @@
|
|||||||
|
#!/bin/sh
|
||||||
|
|
||||||
|
TOPDIR=$1
|
||||||
|
USAGE="$0 <TOPDIR> [-d]"
|
||||||
|
if [ -z "${TOPDIR}" ]; then
|
||||||
|
echo "Missing argument"
|
||||||
|
echo $USAGE
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
OPENOCD_PATH="/cygdrive/c/OpenOCD/openocd-0.4.0/src"
|
||||||
|
OPENOCD_EXE=openocd.exe
|
||||||
|
OPENOCD_CFG="${TOPDIR}/configs/olimex-lpc1766stk/tools/olimex.cfg"
|
||||||
|
OPENOCD_ARGS="-f `cygpath -w ${OPENOCD_CFG}`"
|
||||||
|
|
||||||
|
if [ "X$2" = "X-d" ]; then
|
||||||
|
OPENOCD_ARGS=$OPENOCD_ARGS" -d3"
|
||||||
|
set -x
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ ! -d ${OPENOCD_PATH} ]; then
|
||||||
|
echo "OpenOCD path does not exist: ${OPENOCD_PATH}"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
if [ ! -x ${OPENOCD_PATH}/${OPENOCD_EXE} ]; then
|
||||||
|
echo "OpenOCD does not exist: ${OPENOCD_PATH}/${OPENOCD_EXE}"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
if [ ! -f ${OPENOCD_CFG} ]; then
|
||||||
|
echo "OpenOCD config file does not exist: ${OPENOCD_CFG}"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
echo "Starting OpenOCD"
|
||||||
|
${OPENOCD_PATH}/${OPENOCD_EXE} ${OPENOCD_ARGS} &
|
||||||
|
echo "OpenOCD daemon started"
|
||||||
|
ps -ef | grep openocd
|
||||||
|
echo "In GDB: target remote localhost:3333"
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
162
configs/olimex-lpc1766stk/usbserial/Make.defs
Executable file
162
configs/olimex-lpc1766stk/usbserial/Make.defs
Executable file
@ -0,0 +1,162 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/usbserial/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
# Setup for the selected toolchain
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
|
||||||
|
# CodeSourcery under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
|
||||||
|
# CodeSourcery under Linux
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_DEVKITARM),y)
|
||||||
|
# devkitARM under Windows
|
||||||
|
CROSSDEV = arm-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
|
||||||
|
# NuttX buildroot under Linux or Cygwin
|
||||||
|
CROSSDEV = arm-elf-
|
||||||
|
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -Os
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbserial/ld.script
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define PREPROCESS
|
||||||
|
@echo "CPP: $1->$2"
|
||||||
|
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILEXX
|
||||||
|
@echo "CXX: $1"
|
||||||
|
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
848
configs/olimex-lpc1766stk/usbserial/defconfig
Executable file
848
configs/olimex-lpc1766stk/usbserial/defconfig
Executable file
@ -0,0 +1,848 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/usbserial/defconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# architecture selection
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||||
|
# processor architecture.
|
||||||
|
# CONFIG_ARCH_family - for use in C code. This identifies the
|
||||||
|
# particular chip family that the architecture is implemented
|
||||||
|
# in.
|
||||||
|
# CONFIG_ARCH_architecture - for use in C code. This identifies the
|
||||||
|
# specific architecture within the chip familyl.
|
||||||
|
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||||
|
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||||
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||||
|
# the board that supports the particular chip or SoC.
|
||||||
|
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||||
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||||
|
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||||
|
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||||
|
# CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||||
|
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
|
||||||
|
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||||
|
# stack. If defined, this symbol is the size of the interrupt
|
||||||
|
# stack in bytes. If not defined, the user task stacks will be
|
||||||
|
# used during interrupt handling.
|
||||||
|
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||||
|
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
|
||||||
|
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||||
|
# cause a 100 second delay during boot-up. This 100 second delay
|
||||||
|
# serves no purpose other than it allows you to calibrate
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||||
|
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||||
|
# the delay actually is 100 seconds.
|
||||||
|
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||||
|
#
|
||||||
|
CONFIG_ARCH=arm
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
CONFIG_ARCH_CORTEXM3=y
|
||||||
|
CONFIG_ARCH_CHIP=lpc17xx
|
||||||
|
CONFIG_ARCH_CHIP_LPC1768=y
|
||||||
|
CONFIG_ARCH_BOARD=olimex-lpc1766stk
|
||||||
|
CONFIG_ARCH_BOARD_LPC1766STK=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=7982
|
||||||
|
CONFIG_DRAM_SIZE=(32*1024)
|
||||||
|
CONFIG_DRAM_START=0x10000000
|
||||||
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=n
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_ARCH_BOOTLOADER=n
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_BUTTONS=n
|
||||||
|
CONFIG_ARCH_CALIBRATION=n
|
||||||
|
CONFIG_ARCH_DMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Identify toolchain and linker options
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_CODESOURCERYW=n
|
||||||
|
CONFIG_LPC17_CODESOURCERYL=n
|
||||||
|
CONFIG_LPC17_DEVKITARM=n
|
||||||
|
CONFIG_LPC17_BUILDROOT=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
|
||||||
|
CONFIG_LPC17_ETHERNET=n
|
||||||
|
CONFIG_LPC17_USBHOST=n
|
||||||
|
CONFIG_LPC17_USBOTG=n
|
||||||
|
CONFIG_LPC17_USBDEV=n
|
||||||
|
CONFIG_LPC17_UART0=y
|
||||||
|
CONFIG_LPC17_UART1=n
|
||||||
|
CONFIG_LPC17_UART2=n
|
||||||
|
CONFIG_LPC17_UART3=n
|
||||||
|
CONFIG_LPC17_CAN1=n
|
||||||
|
CONFIG_LPC17_CAN2=n
|
||||||
|
CONFIG_LPC17_SPI=n
|
||||||
|
CONFIG_LPC17_SSP0=n
|
||||||
|
CONFIG_LPC17_SSP1=n
|
||||||
|
CONFIG_LPC17_I2C0=n
|
||||||
|
CONFIG_LPC17_I2C1=n
|
||||||
|
CONFIG_LPC17_I2S=n
|
||||||
|
CONFIG_LPC17_TMR0=n
|
||||||
|
CONFIG_LPC17_TMR1=n
|
||||||
|
CONFIG_LPC17_TMR2=n
|
||||||
|
CONFIG_LPC17_TMR3=n
|
||||||
|
CONFIG_LPC17_RIT=n
|
||||||
|
CONFIG_LPC17_PWM=n
|
||||||
|
CONFIG_LPC17_MCPWM=n
|
||||||
|
CONFIG_LPC17_QEI=n
|
||||||
|
CONFIG_LPC17_RTC=n
|
||||||
|
CONFIG_LPC17_WDT=n
|
||||||
|
CONFIG_LPC17_ADC=n
|
||||||
|
CONFIG_LPC17_DAC=n
|
||||||
|
CONFIG_LPC17_GPDMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx specific serial device driver settings
|
||||||
|
#
|
||||||
|
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||||
|
# console and ttys0 (default is the UART1).
|
||||||
|
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||||
|
# This specific the size of the receive buffer
|
||||||
|
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||||
|
# being sent. This specific the size of the transmit buffer
|
||||||
|
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||||
|
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||||
|
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||||
|
# CONFIG_UARTn_2STOP - Two stop bits
|
||||||
|
#
|
||||||
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||||
|
CONFIG_UART1_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART2_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART3_SERIAL_CONSOLE=n
|
||||||
|
|
||||||
|
CONFIG_UART0_TXBUFSIZE=256
|
||||||
|
CONFIG_UART1_TXBUFSIZE=256
|
||||||
|
CONFIG_UART2_TXBUFSIZE=256
|
||||||
|
CONFIG_UART3_TXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_RXBUFSIZE=256
|
||||||
|
CONFIG_UART1_RXBUFSIZE=256
|
||||||
|
CONFIG_UART2_RXBUFSIZE=256
|
||||||
|
CONFIG_UART3_RXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_BAUD=115200
|
||||||
|
CONFIG_UART2_BAUD=115200
|
||||||
|
CONFIG_UART3_BAUD=115200
|
||||||
|
CONFIG_UART1_BAUD=115200
|
||||||
|
|
||||||
|
CONFIG_UART0_BITS=8
|
||||||
|
CONFIG_UART1_BITS=8
|
||||||
|
CONFIG_UART2_BITS=8
|
||||||
|
CONFIG_UART3_BITS=8
|
||||||
|
|
||||||
|
CONFIG_UART0_PARITY=0
|
||||||
|
CONFIG_UART1_PARITY=0
|
||||||
|
CONFIG_UART2_PARITY=0
|
||||||
|
CONFIG_UART3_PARITY=0
|
||||||
|
|
||||||
|
CONFIG_UART0_2STOP=0
|
||||||
|
CONFIG_UART1_2STOP=0
|
||||||
|
CONFIG_UART2_2STOP=0
|
||||||
|
CONFIG_UART3_2STOP=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# General build options
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||||
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||||
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||||
|
# different loaders using the GNU objcopy program. This option
|
||||||
|
# should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||||
|
#
|
||||||
|
CONFIG_RRLOAD_BINARY=n
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_MOTOROLA_SREC=n
|
||||||
|
CONFIG_RAW_BINARY=n
|
||||||
|
CONFIG_HAVE_LIBM=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# General OS setup
|
||||||
|
#
|
||||||
|
# CONFIG_APP_DIR - Identifies the relative path to the directory
|
||||||
|
# that builds the application to link with NuttX.
|
||||||
|
# CONFIG_DEBUG - enables built-in debug options
|
||||||
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||||
|
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||||
|
# debug symbols (needed for use with a debugger).
|
||||||
|
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||||
|
# regions of memory to allocate from, this specifies the
|
||||||
|
# number of memory regions that the memory manager must
|
||||||
|
# handle and enables the API mm_addregion(start, end);
|
||||||
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||||
|
# time console output
|
||||||
|
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
|
||||||
|
# or TICKS_PER_MSEC=10. This setting may be defined to
|
||||||
|
# inform NuttX that the processor hardware is providing
|
||||||
|
# system timer interrupts at some interrupt interval other
|
||||||
|
# than 10 msec.
|
||||||
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||||
|
# this number of milliseconds; Round robin scheduling can
|
||||||
|
# be disabled by setting this value to zero.
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||||
|
# scheduler to monitor system performance
|
||||||
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||||
|
# task name to save in the TCB. Useful if scheduler
|
||||||
|
# instrumentation is selected. Set to zero to disable.
|
||||||
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||||
|
# Used to initialize the internal time logic.
|
||||||
|
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
|
||||||
|
# You would only need this if you are concerned about accurate
|
||||||
|
# time conversions in the past or in the distant future.
|
||||||
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
|
||||||
|
# would only need this if you are concerned about accurate
|
||||||
|
# time conversion in the distand past. You must also define
|
||||||
|
# CONFIG_GREGORIAN_TIME in order to use Julian time.
|
||||||
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||||
|
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||||
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||||
|
# driver (minimul support)
|
||||||
|
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||||
|
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||||
|
# inheritance on mutexes and semaphores.
|
||||||
|
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||||
|
# inheritance is enabled. It defines the maximum number of
|
||||||
|
# different threads (minus one) that can take counts on a
|
||||||
|
# semaphore with priority inheritance support. This may be
|
||||||
|
# set to zero if priority inheritance is disabled OR if you
|
||||||
|
# are only using semaphores as mutexes (only one holder) OR
|
||||||
|
# if no more than two threads participate using a counting
|
||||||
|
# semaphore.
|
||||||
|
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||||
|
# then this setting is the maximum number of higher priority
|
||||||
|
# threads (minus 1) than can be waiting for another thread
|
||||||
|
# to release a count on a semaphore. This value may be set
|
||||||
|
# to zero if no more than one thread is expected to wait for
|
||||||
|
# a semaphore.
|
||||||
|
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||||
|
# by task_create() when a new task is started. If set, all
|
||||||
|
# files/drivers will appear to be closed in the new task.
|
||||||
|
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||||
|
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||||
|
# when a new task is started. If set, all files/drivers will
|
||||||
|
# appear to be closed in the new task except for stdin, stdout,
|
||||||
|
# and stderr.
|
||||||
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||||
|
# desciptors by task_create() when a new task is started. If
|
||||||
|
# set, all sockets will appear to be closed in the new task.
|
||||||
|
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||||
|
# This format will support execution of NuttX binaries located
|
||||||
|
# in a ROMFS filesystem (see examples/nxflat).
|
||||||
|
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||||
|
# handle delayed processing from interrupt handlers. This feature
|
||||||
|
# is required for some drivers but, if there are not complaints,
|
||||||
|
# can be safely disabled. The worker thread also performs
|
||||||
|
# garbage collection -- completing any delayed memory deallocations
|
||||||
|
# from interrupt handlers. If the worker thread is disabled,
|
||||||
|
# then that clean will be performed by the IDLE thread instead
|
||||||
|
# (which runs at the lowest of priority and may not be appropriate
|
||||||
|
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
|
||||||
|
# is enabled, then the following options can also be used:
|
||||||
|
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
|
||||||
|
# thread. Default: 50
|
||||||
|
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
|
||||||
|
# work in units of microseconds. Default: 50*1000 (50 MS).
|
||||||
|
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
|
||||||
|
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||||
|
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||||
|
# the worker thread. Default: 4
|
||||||
|
#
|
||||||
|
CONFIG_APP_DIR=examples/usbserial
|
||||||
|
CONFIG_DEBUG=n
|
||||||
|
CONFIG_DEBUG_VERBOSE=n
|
||||||
|
CONFIG_DEBUG_SYMBOLS=n
|
||||||
|
CONFIG_DEBUG_USB=n
|
||||||
|
CONFIG_MM_REGIONS=2
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
CONFIG_START_YEAR=2010
|
||||||
|
CONFIG_START_MONTH=7
|
||||||
|
CONFIG_START_DAY=15
|
||||||
|
CONFIG_GREGORIAN_TIME=n
|
||||||
|
CONFIG_JULIAN_TIME=n
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=n
|
||||||
|
CONFIG_MUTEX_TYPES=n
|
||||||
|
CONFIG_PRIORITY_INHERITANCE=n
|
||||||
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||||
|
CONFIG_SEM_NNESTPRIO=0
|
||||||
|
CONFIG_FDCLONE_DISABLE=n
|
||||||
|
CONFIG_FDCLONE_STDIO=n
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_NXFLAT=n
|
||||||
|
CONFIG_SCHED_WORKQUEUE=n
|
||||||
|
CONFIG_SCHED_WORKPRIORITY=50
|
||||||
|
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||||
|
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||||
|
CONFIG_SIG_SIGWORK=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# The following can be used to disable categories of
|
||||||
|
# APIs supported by the OS. If the compiler supports
|
||||||
|
# weak functions, then it should not be necessary to
|
||||||
|
# disable functions unless you want to restrict usage
|
||||||
|
# of those APIs.
|
||||||
|
#
|
||||||
|
# There are certain dependency relationships in these
|
||||||
|
# features.
|
||||||
|
#
|
||||||
|
# o mq_notify logic depends on signals to awaken tasks
|
||||||
|
# waiting for queues to become full or empty.
|
||||||
|
# o pthread_condtimedwait() depends on signals to wake
|
||||||
|
# up waiting tasks.
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_CLOCK=n
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||||
|
CONFIG_DISABLE_PTHREAD=n
|
||||||
|
CONFIG_DISABLE_SIGNALS=n
|
||||||
|
CONFIG_DISABLE_MQUEUE=n
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
CONFIG_DISABLE_ENVIRON=n
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Misc libc settings
|
||||||
|
#
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||||
|
# little smaller if we do not support fieldwidthes
|
||||||
|
#
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Allow for architecture optimized implementations
|
||||||
|
#
|
||||||
|
# The architecture can provide optimized versions of the
|
||||||
|
# following to improve system performance
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_MEMCPY=n
|
||||||
|
CONFIG_ARCH_MEMCMP=n
|
||||||
|
CONFIG_ARCH_MEMMOVE=n
|
||||||
|
CONFIG_ARCH_MEMSET=n
|
||||||
|
CONFIG_ARCH_STRCMP=n
|
||||||
|
CONFIG_ARCH_STRCPY=n
|
||||||
|
CONFIG_ARCH_STRNCPY=n
|
||||||
|
CONFIG_ARCH_STRLEN=n
|
||||||
|
CONFIG_ARCH_STRNLEN=n
|
||||||
|
CONFIG_ARCH_BZERO=n
|
||||||
|
CONFIG_ARCH_KMALLOC=n
|
||||||
|
CONFIG_ARCH_KZMALLOC=n
|
||||||
|
CONFIG_ARCH_KFREE=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||||
|
# active tasks. This value must be a power of two.
|
||||||
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||||
|
# of parameters that a task may receive (i.e., maxmum value
|
||||||
|
# of 'argc')
|
||||||
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||||
|
# specific data that can be retained
|
||||||
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||||
|
# descriptors (one for each open)
|
||||||
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||||
|
# can be fopen'ed
|
||||||
|
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||||
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||||
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||||
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# message structures to minimize dynamic allocations
|
||||||
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||||
|
# a fixed payload size given by this settin (does not include
|
||||||
|
# other message structure overhead.
|
||||||
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||||
|
# can be passed to a watchdog handler
|
||||||
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# watchdog structures to minimize dynamic allocations
|
||||||
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||||
|
# timer structures. The system manages a pool of preallocated
|
||||||
|
# timer structures to minimize dynamic allocations. Set to
|
||||||
|
# zero for all dynamic allocations.
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=256
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Filesystem configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_MMCSD_NSLOTS
|
||||||
|
# Number of MMC/SD slots supported by the driver
|
||||||
|
# CONFIG_MMCSD_READONLY
|
||||||
|
# Provide read-only access (default is read/write)
|
||||||
|
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
|
||||||
|
# Default is 20MHz.
|
||||||
|
#
|
||||||
|
CONFIG_MMCSD_NSLOTS=1
|
||||||
|
CONFIG_MMCSD_READONLY=n
|
||||||
|
CONFIG_MMCSD_SPICLOCK=12500000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Block driver buffering
|
||||||
|
#
|
||||||
|
# CONFIG_FS_READAHEAD
|
||||||
|
# Enable read-ahead buffering
|
||||||
|
# CONFIG_FS_WRITEBUFFER
|
||||||
|
# Enable write buffering
|
||||||
|
#
|
||||||
|
CONFIG_FS_READAHEAD=n
|
||||||
|
CONFIG_FS_WRITEBUFFER=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SDIO-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_SDIO_DMA
|
||||||
|
# SDIO driver supports DMA
|
||||||
|
# CONFIG_MMCSD_MMCSUPPORT
|
||||||
|
# Enable support for MMC cards
|
||||||
|
# CONFIG_MMCSD_HAVECARDDETECT
|
||||||
|
# SDIO driver card detection is 100% accurate
|
||||||
|
#
|
||||||
|
CONFIG_SDIO_DMA=n
|
||||||
|
CONFIG_MMCSD_MMCSUPPORT=n
|
||||||
|
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# TCP/IP and UDP support via uIP
|
||||||
|
# CONFIG_NET - Enable or disable all network features
|
||||||
|
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||||
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||||
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||||
|
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||||
|
# CONFIG_NET_TCP - TCP support on or off
|
||||||
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||||
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||||
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||||
|
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||||
|
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||||
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||||
|
# CONFIG_NET_UDP - UDP support on or off
|
||||||
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||||
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||||
|
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||||
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||||
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||||
|
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||||
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||||
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||||
|
# CONFIG_NET_BROADCAST - Broadcast support
|
||||||
|
# CONFIG_NET_LLH_LEN - The link level header length
|
||||||
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||||
|
#
|
||||||
|
CONFIG_NET=n
|
||||||
|
CONFIG_NET_IPv6=n
|
||||||
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||||
|
CONFIG_NET_SOCKOPTS=y
|
||||||
|
CONFIG_NET_BUFSIZE=420
|
||||||
|
CONFIG_NET_TCP=n
|
||||||
|
CONFIG_NET_TCP_CONNS=40
|
||||||
|
CONFIG_NET_MAX_LISTENPORTS=40
|
||||||
|
CONFIG_NET_UDP=n
|
||||||
|
CONFIG_NET_UDP_CHECKSUMS=y
|
||||||
|
#CONFIG_NET_UDP_CONNS=10
|
||||||
|
CONFIG_NET_ICMP=n
|
||||||
|
CONFIG_NET_ICMP_PING=n
|
||||||
|
#CONFIG_NET_PINGADDRCONF=0
|
||||||
|
CONFIG_NET_STATISTICS=y
|
||||||
|
#CONFIG_NET_RECEIVE_WINDOW=
|
||||||
|
#CONFIG_NET_ARPTAB_SIZE=8
|
||||||
|
CONFIG_NET_BROADCAST=n
|
||||||
|
#CONFIG_NET_LLH_LEN=14
|
||||||
|
#CONFIG_NET_FWCACHE_SIZE=2
|
||||||
|
|
||||||
|
#
|
||||||
|
# UIP Network Utilities
|
||||||
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||||
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||||
|
#
|
||||||
|
CONFIG_NET_DHCP_LIGHT=n
|
||||||
|
CONFIG_NET_RESOLV_ENTRIES=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBDEV
|
||||||
|
# Enables USB device support
|
||||||
|
# CONFIG_USBDEV_ISOCHRONOUS
|
||||||
|
# Build in extra support for isochronous endpoints
|
||||||
|
# CONFIG_USBDEV_DUALSPEED
|
||||||
|
# Hardware handles high and full speed operation (USB 2.0)
|
||||||
|
# CONFIG_USBDEV_SELFPOWERED
|
||||||
|
# Will cause USB features to indicate that the device is
|
||||||
|
# self-powered
|
||||||
|
# CONFIG_USBDEV_MAXPOWER
|
||||||
|
# Maximum power consumption in mA
|
||||||
|
# CONFIG_USBDEV_TRACE
|
||||||
|
# Enables USB tracing for debug
|
||||||
|
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||||
|
# Number of trace entries to remember
|
||||||
|
#
|
||||||
|
CONFIG_USBDEV=y
|
||||||
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||||
|
CONFIG_USBDEV_DUALSPEED=n
|
||||||
|
CONFIG_USBDEV_SELFPOWERED=y
|
||||||
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||||
|
CONFIG_USBDEV_MAXPOWER=100
|
||||||
|
CONFIG_USBDEV_TRACE=n
|
||||||
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx USB Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
|
||||||
|
# Handle USB Start-Of-Frame events.
|
||||||
|
# Enable reading SOF from interrupt handler vs. simply reading on demand.
|
||||||
|
# Probably a bad idea... Unless there is some issue with sampling the SOF
|
||||||
|
# from hardware asynchronously.
|
||||||
|
# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
|
||||||
|
# Enable high priority interrupts. I have no idea why you might want to
|
||||||
|
# do that
|
||||||
|
# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
|
||||||
|
# Number of DMA descriptors to allocate in SRAM.
|
||||||
|
# CONFIG_LPC17_USBDEV_DMA
|
||||||
|
# Enable lpc17xx-specific DMA support
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_DMA=n
|
||||||
|
CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
|
||||||
|
CONFIG_LPC17_USBDEV_DMAINTMASK=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSER
|
||||||
|
# Enable compilation of the USB serial driver
|
||||||
|
# CONFIG_USBSER_EPINTIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# interrupt IN operation
|
||||||
|
# CONFIG_USBSER_EPBULKOUT
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk OUT operation
|
||||||
|
# CONFIG_USBSER_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk IN operation
|
||||||
|
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||||
|
# Size of the serial receive/transmit buffers
|
||||||
|
#
|
||||||
|
CONFIG_USBSER=y
|
||||||
|
CONFIG_USBSER_EPINTIN=1
|
||||||
|
CONFIG_USBSER_EPBULKOUT=2
|
||||||
|
CONFIG_USBSER_EPBULKIN=5
|
||||||
|
CONFIG_USBSER_NWRREQS=4
|
||||||
|
CONFIG_USBSER_NRDREQS=4
|
||||||
|
CONFIG_USBSER_VENDORID=0x067b
|
||||||
|
CONFIG_USBSER_PRODUCTID=0x2303
|
||||||
|
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||||
|
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||||
|
CONFIG_USBSER_RXBUFSIZE=512
|
||||||
|
CONFIG_USBSER_TXBUFSIZE=512
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Storage Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSTRG
|
||||||
|
# Enable compilation of the USB storage driver
|
||||||
|
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||||
|
# Max packet size for endpoint 0
|
||||||
|
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoints that support
|
||||||
|
# bulk OUT and IN operations
|
||||||
|
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||||
|
# The size of the buffer in each write/read request. This
|
||||||
|
# value needs to be at least as large as the endpoint
|
||||||
|
# maxpacket and ideally as large as a block device sector.
|
||||||
|
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSTRG_REMOVABLE
|
||||||
|
# Select if the media is removable
|
||||||
|
#
|
||||||
|
CONFIG_USBSTRG=n
|
||||||
|
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||||
|
CONFIG_USBSTRG_EPBULKOUT=2
|
||||||
|
CONFIG_USBSTRG_EPBULKIN=5
|
||||||
|
CONFIG_USBSTRG_NRDREQS=2
|
||||||
|
CONFIG_USBSTRG_NWRREQS=2
|
||||||
|
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||||
|
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||||
|
CONFIG_USBSTRG_VENDORID=0x584e
|
||||||
|
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||||
|
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||||
|
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||||
|
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||||
|
CONFIG_USBSTRG_REMOVABLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/uip
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nettest
|
||||||
|
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/ostest
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nsh
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||||
|
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||||
|
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||||
|
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||||
|
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||||
|
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
|
||||||
|
# specific initialization (nsh_archinitialize()).
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||||
|
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||||
|
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||||
|
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||||
|
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||||
|
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||||
|
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||||
|
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ARCHINIT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||||
|
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||||
|
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||||
|
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||||
|
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture-specific NSH options
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/usbserial
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_INONLY
|
||||||
|
# Only verify IN (device-to-host) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
||||||
|
# Only verify OUT (host-to-device) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
||||||
|
# Send only small, single packet messages. Default: Send large and small.
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
||||||
|
# Send only large, multi-packet messages. Default: Send large and small.
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||||
|
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/usbstorage
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||||
|
# Defines the number of logical units (LUNs) exported by the USB storage
|
||||||
|
# driver. Each LUN corresponds to one exported block driver (or partition
|
||||||
|
# of a block driver). May be 1, 2, or 3. Default is 1.
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
|
||||||
|
# The minor device number of the block driver for the first LUN. For
|
||||||
|
# example, N in /dev/mmcsdN. Used for registering the block driver. Default
|
||||||
|
# is zero.
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
|
||||||
|
# The full path to the registered block driver. Default is "/dev/mmcsd0"
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
|
||||||
|
# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||||
|
# is 2 or 3. No defaults.
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
|
||||||
|
# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||||
|
# is 3. No defaults.
|
||||||
|
#
|
||||||
|
# If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
|
||||||
|
# the example code will also manage the USB trace output. The amount of trace output
|
||||||
|
# can be controlled using:
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACEINIT
|
||||||
|
# Show initialization events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACECLASS
|
||||||
|
# Show class driver events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
|
||||||
|
# Show data transfer events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
|
||||||
|
# Show controller events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
|
||||||
|
# Show interrupt-related events.
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_NLUNS=1
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||||
|
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||||
|
# (should also be =n for the LPC17xx which always runs from flash)
|
||||||
|
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||||
|
# but copy themselves entirely into RAM for better performance.
|
||||||
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||||
|
# all stack operations outside of the nuttx model.
|
||||||
|
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||||
|
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||||
|
# This is the thread that (1) performs the inital boot of the system up
|
||||||
|
# to the point where user_start() is spawned, and (2) there after is the
|
||||||
|
# IDLE thread that executes only when there is no other thread ready to
|
||||||
|
# run.
|
||||||
|
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||||
|
# for the main user thread that begins at the user_start() entry point.
|
||||||
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||||
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||||
|
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||||
|
# CONFIG_HEAP_SIZE - The size of the heap
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=n
|
||||||
|
CONFIG_BOOT_COPYTORAM=n
|
||||||
|
CONFIG_CUSTOM_STACK=n
|
||||||
|
CONFIG_STACK_POINTER=
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
CONFIG_HEAP_BASE=
|
||||||
|
CONFIG_HEAP_SIZE=
|
||||||
109
configs/olimex-lpc1766stk/usbserial/ld.script
Executable file
109
configs/olimex-lpc1766stk/usbserial/ld.script
Executable file
@ -0,0 +1,109 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/usbserial/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
|
||||||
|
* 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
|
||||||
|
* 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
|
||||||
|
* 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
|
||||||
|
* into the 32Kb CPU SRAM address range.
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
|
||||||
|
sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.); /* See below */
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.ARM.exidx : {
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.bss : { /* BSS */
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
47
configs/olimex-lpc1766stk/usbserial/setenv.sh
Executable file
47
configs/olimex-lpc1766stk/usbserial/setenv.sh
Executable file
@ -0,0 +1,47 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/olimex-lpc1766stk/usbserial/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
|
||||||
|
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
162
configs/olimex-lpc1766stk/usbstorage/Make.defs
Executable file
162
configs/olimex-lpc1766stk/usbstorage/Make.defs
Executable file
@ -0,0 +1,162 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/usbstorage/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
|
||||||
|
# Setup for the selected toolchain
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
|
||||||
|
# CodeSourcery under Windows
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
|
||||||
|
# CodeSourcery under Linux
|
||||||
|
CROSSDEV = arm-none-eabi-
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_DEVKITARM),y)
|
||||||
|
# devkitARM under Windows
|
||||||
|
CROSSDEV = arm-eabi-
|
||||||
|
WINTOOL = y
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
|
||||||
|
# NuttX buildroot under Linux or Cygwin
|
||||||
|
CROSSDEV = arm-elf-
|
||||||
|
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||||
|
MAXOPTIMIZATION = -Os
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script}"
|
||||||
|
MAXOPTIMIZATION = -O2
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/usbstorage/ld.script
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(CROSSDEV)ar rcs
|
||||||
|
NM = $(CROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||||
|
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||||
|
|
||||||
|
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
else
|
||||||
|
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
define PREPROCESS
|
||||||
|
@echo "CPP: $1->$2"
|
||||||
|
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILE
|
||||||
|
@echo "CC: $1"
|
||||||
|
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define COMPILEXX
|
||||||
|
@echo "CXX: $1"
|
||||||
|
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ASSEMBLE
|
||||||
|
@echo "AS: $1"
|
||||||
|
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||||
|
endef
|
||||||
|
|
||||||
|
define ARCHIVE
|
||||||
|
echo "AR: $2"; \
|
||||||
|
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||||
|
endef
|
||||||
|
|
||||||
|
define CLEAN
|
||||||
|
@rm -f *.o *.a
|
||||||
|
endef
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
|
||||||
848
configs/olimex-lpc1766stk/usbstorage/defconfig
Executable file
848
configs/olimex-lpc1766stk/usbstorage/defconfig
Executable file
@ -0,0 +1,848 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/olimex-lpc1766stk/usbstorage/defconfig
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
#
|
||||||
|
# architecture selection
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||||
|
# processor architecture.
|
||||||
|
# CONFIG_ARCH_family - for use in C code. This identifies the
|
||||||
|
# particular chip family that the architecture is implemented
|
||||||
|
# in.
|
||||||
|
# CONFIG_ARCH_architecture - for use in C code. This identifies the
|
||||||
|
# specific architecture within the chip familyl.
|
||||||
|
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||||
|
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||||
|
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||||
|
# the board that supports the particular chip or SoC.
|
||||||
|
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||||
|
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||||
|
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||||
|
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||||
|
# CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||||
|
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
|
||||||
|
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||||
|
# stack. If defined, this symbol is the size of the interrupt
|
||||||
|
# stack in bytes. If not defined, the user task stacks will be
|
||||||
|
# used during interrupt handling.
|
||||||
|
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||||
|
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
|
||||||
|
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
|
||||||
|
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||||
|
# cause a 100 second delay during boot-up. This 100 second delay
|
||||||
|
# serves no purpose other than it allows you to calibrate
|
||||||
|
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||||
|
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||||
|
# the delay actually is 100 seconds.
|
||||||
|
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||||
|
#
|
||||||
|
CONFIG_ARCH=arm
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
CONFIG_ARCH_CORTEXM3=y
|
||||||
|
CONFIG_ARCH_CHIP=lpc17xx
|
||||||
|
CONFIG_ARCH_CHIP_LPC1768=y
|
||||||
|
CONFIG_ARCH_BOARD=olimex-lpc1766stk
|
||||||
|
CONFIG_ARCH_BOARD_LPC1766STK=y
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=7982
|
||||||
|
CONFIG_DRAM_SIZE=(32*1024)
|
||||||
|
CONFIG_DRAM_START=0x10000000
|
||||||
|
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||||
|
CONFIG_ARCH_IRQPRIO=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=n
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
CONFIG_ARCH_BOOTLOADER=n
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_BUTTONS=n
|
||||||
|
CONFIG_ARCH_CALIBRATION=n
|
||||||
|
CONFIG_ARCH_DMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Identify toolchain and linker options
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_CODESOURCERYW=n
|
||||||
|
CONFIG_LPC17_CODESOURCERYL=n
|
||||||
|
CONFIG_LPC17_DEVKITARM=n
|
||||||
|
CONFIG_LPC17_BUILDROOT=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
#
|
||||||
|
# Individual subsystems can be enabled:
|
||||||
|
# (MAINOSC, PLL0, PLL1 and FLASH are controlled in board.h)
|
||||||
|
CONFIG_LPC17_ETHERNET=n
|
||||||
|
CONFIG_LPC17_USBHOST=n
|
||||||
|
CONFIG_LPC17_USBOTG=n
|
||||||
|
CONFIG_LPC17_USBDEV=n
|
||||||
|
CONFIG_LPC17_UART0=y
|
||||||
|
CONFIG_LPC17_UART1=n
|
||||||
|
CONFIG_LPC17_UART2=n
|
||||||
|
CONFIG_LPC17_UART3=n
|
||||||
|
CONFIG_LPC17_CAN1=n
|
||||||
|
CONFIG_LPC17_CAN2=n
|
||||||
|
CONFIG_LPC17_SPI=n
|
||||||
|
CONFIG_LPC17_SSP0=y
|
||||||
|
CONFIG_LPC17_SSP1=n
|
||||||
|
CONFIG_LPC17_I2C0=n
|
||||||
|
CONFIG_LPC17_I2C1=n
|
||||||
|
CONFIG_LPC17_I2S=n
|
||||||
|
CONFIG_LPC17_TMR0=n
|
||||||
|
CONFIG_LPC17_TMR1=n
|
||||||
|
CONFIG_LPC17_TMR2=n
|
||||||
|
CONFIG_LPC17_TMR3=n
|
||||||
|
CONFIG_LPC17_RIT=n
|
||||||
|
CONFIG_LPC17_PWM=n
|
||||||
|
CONFIG_LPC17_MCPWM=n
|
||||||
|
CONFIG_LPC17_QEI=n
|
||||||
|
CONFIG_LPC17_RTC=n
|
||||||
|
CONFIG_LPC17_WDT=n
|
||||||
|
CONFIG_LPC17_ADC=n
|
||||||
|
CONFIG_LPC17_DAC=n
|
||||||
|
CONFIG_LPC17_GPDMA=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx specific serial device driver settings
|
||||||
|
#
|
||||||
|
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||||
|
# console and ttys0 (default is the UART1).
|
||||||
|
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||||
|
# This specific the size of the receive buffer
|
||||||
|
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||||
|
# being sent. This specific the size of the transmit buffer
|
||||||
|
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||||
|
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||||
|
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||||
|
# CONFIG_UARTn_2STOP - Two stop bits
|
||||||
|
#
|
||||||
|
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||||
|
CONFIG_UART1_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART2_SERIAL_CONSOLE=n
|
||||||
|
CONFIG_UART3_SERIAL_CONSOLE=n
|
||||||
|
|
||||||
|
CONFIG_UART0_TXBUFSIZE=256
|
||||||
|
CONFIG_UART1_TXBUFSIZE=256
|
||||||
|
CONFIG_UART2_TXBUFSIZE=256
|
||||||
|
CONFIG_UART3_TXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_RXBUFSIZE=256
|
||||||
|
CONFIG_UART1_RXBUFSIZE=256
|
||||||
|
CONFIG_UART2_RXBUFSIZE=256
|
||||||
|
CONFIG_UART3_RXBUFSIZE=256
|
||||||
|
|
||||||
|
CONFIG_UART0_BAUD=115200
|
||||||
|
CONFIG_UART2_BAUD=115200
|
||||||
|
CONFIG_UART3_BAUD=115200
|
||||||
|
CONFIG_UART1_BAUD=115200
|
||||||
|
|
||||||
|
CONFIG_UART0_BITS=8
|
||||||
|
CONFIG_UART1_BITS=8
|
||||||
|
CONFIG_UART2_BITS=8
|
||||||
|
CONFIG_UART3_BITS=8
|
||||||
|
|
||||||
|
CONFIG_UART0_PARITY=0
|
||||||
|
CONFIG_UART1_PARITY=0
|
||||||
|
CONFIG_UART2_PARITY=0
|
||||||
|
CONFIG_UART3_PARITY=0
|
||||||
|
|
||||||
|
CONFIG_UART0_2STOP=0
|
||||||
|
CONFIG_UART1_2STOP=0
|
||||||
|
CONFIG_UART2_2STOP=0
|
||||||
|
CONFIG_UART3_2STOP=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# General build options
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||||
|
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||||
|
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||||
|
# used with many different loaders using the GNU objcopy program
|
||||||
|
# Should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||||
|
# different loaders using the GNU objcopy program. This option
|
||||||
|
# should not be selected if you are not using the GNU toolchain.
|
||||||
|
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||||
|
#
|
||||||
|
CONFIG_RRLOAD_BINARY=n
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
CONFIG_MOTOROLA_SREC=n
|
||||||
|
CONFIG_RAW_BINARY=n
|
||||||
|
CONFIG_HAVE_LIBM=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# General OS setup
|
||||||
|
#
|
||||||
|
# CONFIG_APP_DIR - Identifies the relative path to the directory
|
||||||
|
# that builds the application to link with NuttX.
|
||||||
|
# CONFIG_DEBUG - enables built-in debug options
|
||||||
|
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||||
|
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||||
|
# debug symbols (needed for use with a debugger).
|
||||||
|
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||||
|
# regions of memory to allocate from, this specifies the
|
||||||
|
# number of memory regions that the memory manager must
|
||||||
|
# handle and enables the API mm_addregion(start, end);
|
||||||
|
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||||
|
# time console output
|
||||||
|
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
|
||||||
|
# or TICKS_PER_MSEC=10. This setting may be defined to
|
||||||
|
# inform NuttX that the processor hardware is providing
|
||||||
|
# system timer interrupts at some interrupt interval other
|
||||||
|
# than 10 msec.
|
||||||
|
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||||
|
# this number of milliseconds; Round robin scheduling can
|
||||||
|
# be disabled by setting this value to zero.
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||||
|
# scheduler to monitor system performance
|
||||||
|
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||||
|
# task name to save in the TCB. Useful if scheduler
|
||||||
|
# instrumentation is selected. Set to zero to disable.
|
||||||
|
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||||
|
# Used to initialize the internal time logic.
|
||||||
|
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
|
||||||
|
# You would only need this if you are concerned about accurate
|
||||||
|
# time conversions in the past or in the distant future.
|
||||||
|
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
|
||||||
|
# would only need this if you are concerned about accurate
|
||||||
|
# time conversion in the distand past. You must also define
|
||||||
|
# CONFIG_GREGORIAN_TIME in order to use Julian time.
|
||||||
|
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||||
|
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||||
|
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||||
|
# driver (minimul support)
|
||||||
|
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||||
|
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||||
|
# inheritance on mutexes and semaphores.
|
||||||
|
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||||
|
# inheritance is enabled. It defines the maximum number of
|
||||||
|
# different threads (minus one) that can take counts on a
|
||||||
|
# semaphore with priority inheritance support. This may be
|
||||||
|
# set to zero if priority inheritance is disabled OR if you
|
||||||
|
# are only using semaphores as mutexes (only one holder) OR
|
||||||
|
# if no more than two threads participate using a counting
|
||||||
|
# semaphore.
|
||||||
|
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||||
|
# then this setting is the maximum number of higher priority
|
||||||
|
# threads (minus 1) than can be waiting for another thread
|
||||||
|
# to release a count on a semaphore. This value may be set
|
||||||
|
# to zero if no more than one thread is expected to wait for
|
||||||
|
# a semaphore.
|
||||||
|
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||||
|
# by task_create() when a new task is started. If set, all
|
||||||
|
# files/drivers will appear to be closed in the new task.
|
||||||
|
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||||
|
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||||
|
# when a new task is started. If set, all files/drivers will
|
||||||
|
# appear to be closed in the new task except for stdin, stdout,
|
||||||
|
# and stderr.
|
||||||
|
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||||
|
# desciptors by task_create() when a new task is started. If
|
||||||
|
# set, all sockets will appear to be closed in the new task.
|
||||||
|
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||||
|
# This format will support execution of NuttX binaries located
|
||||||
|
# in a ROMFS filesystem (see examples/nxflat).
|
||||||
|
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||||
|
# handle delayed processing from interrupt handlers. This feature
|
||||||
|
# is required for some drivers but, if there are not complaints,
|
||||||
|
# can be safely disabled. The worker thread also performs
|
||||||
|
# garbage collection -- completing any delayed memory deallocations
|
||||||
|
# from interrupt handlers. If the worker thread is disabled,
|
||||||
|
# then that clean will be performed by the IDLE thread instead
|
||||||
|
# (which runs at the lowest of priority and may not be appropriate
|
||||||
|
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
|
||||||
|
# is enabled, then the following options can also be used:
|
||||||
|
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
|
||||||
|
# thread. Default: 50
|
||||||
|
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
|
||||||
|
# work in units of microseconds. Default: 50*1000 (50 MS).
|
||||||
|
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
|
||||||
|
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||||
|
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||||
|
# the worker thread. Default: 4
|
||||||
|
#
|
||||||
|
CONFIG_APP_DIR=examples/usbstorage
|
||||||
|
CONFIG_DEBUG=n
|
||||||
|
CONFIG_DEBUG_VERBOSE=n
|
||||||
|
CONFIG_DEBUG_SYMBOLS=n
|
||||||
|
CONFIG_DDEBUG_USB=n
|
||||||
|
CONFIG_MM_REGIONS=2
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_SCHED_INSTRUMENTATION=n
|
||||||
|
CONFIG_TASK_NAME_SIZE=0
|
||||||
|
CONFIG_START_YEAR=2010
|
||||||
|
CONFIG_START_MONTH=7
|
||||||
|
CONFIG_START_DAY=15
|
||||||
|
CONFIG_GREGORIAN_TIME=n
|
||||||
|
CONFIG_JULIAN_TIME=n
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
CONFIG_DEV_LOWCONSOLE=n
|
||||||
|
CONFIG_MUTEX_TYPES=n
|
||||||
|
CONFIG_PRIORITY_INHERITANCE=n
|
||||||
|
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||||
|
CONFIG_SEM_NNESTPRIO=0
|
||||||
|
CONFIG_FDCLONE_DISABLE=n
|
||||||
|
CONFIG_FDCLONE_STDIO=n
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_NXFLAT=n
|
||||||
|
CONFIG_SCHED_WORKQUEUE=n
|
||||||
|
CONFIG_SCHED_WORKPRIORITY=50
|
||||||
|
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||||
|
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||||
|
CONFIG_SIG_SIGWORK=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# The following can be used to disable categories of
|
||||||
|
# APIs supported by the OS. If the compiler supports
|
||||||
|
# weak functions, then it should not be necessary to
|
||||||
|
# disable functions unless you want to restrict usage
|
||||||
|
# of those APIs.
|
||||||
|
#
|
||||||
|
# There are certain dependency relationships in these
|
||||||
|
# features.
|
||||||
|
#
|
||||||
|
# o mq_notify logic depends on signals to awaken tasks
|
||||||
|
# waiting for queues to become full or empty.
|
||||||
|
# o pthread_condtimedwait() depends on signals to wake
|
||||||
|
# up waiting tasks.
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_CLOCK=n
|
||||||
|
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||||
|
CONFIG_DISABLE_PTHREAD=n
|
||||||
|
CONFIG_DISABLE_SIGNALS=n
|
||||||
|
CONFIG_DISABLE_MQUEUE=n
|
||||||
|
CONFIG_DISABLE_MOUNTPOINT=y
|
||||||
|
CONFIG_DISABLE_ENVIRON=n
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Misc libc settings
|
||||||
|
#
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||||
|
# little smaller if we do not support fieldwidthes
|
||||||
|
#
|
||||||
|
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Allow for architecture optimized implementations
|
||||||
|
#
|
||||||
|
# The architecture can provide optimized versions of the
|
||||||
|
# following to improve system performance
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_MEMCPY=n
|
||||||
|
CONFIG_ARCH_MEMCMP=n
|
||||||
|
CONFIG_ARCH_MEMMOVE=n
|
||||||
|
CONFIG_ARCH_MEMSET=n
|
||||||
|
CONFIG_ARCH_STRCMP=n
|
||||||
|
CONFIG_ARCH_STRCPY=n
|
||||||
|
CONFIG_ARCH_STRNCPY=n
|
||||||
|
CONFIG_ARCH_STRLEN=n
|
||||||
|
CONFIG_ARCH_STRNLEN=n
|
||||||
|
CONFIG_ARCH_BZERO=n
|
||||||
|
CONFIG_ARCH_KMALLOC=n
|
||||||
|
CONFIG_ARCH_KZMALLOC=n
|
||||||
|
CONFIG_ARCH_KFREE=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sizes of configurable things (0 disables)
|
||||||
|
#
|
||||||
|
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||||
|
# active tasks. This value must be a power of two.
|
||||||
|
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||||
|
# of parameters that a task may receive (i.e., maxmum value
|
||||||
|
# of 'argc')
|
||||||
|
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||||
|
# specific data that can be retained
|
||||||
|
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||||
|
# descriptors (one for each open)
|
||||||
|
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||||
|
# can be fopen'ed
|
||||||
|
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||||
|
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||||
|
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||||
|
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||||
|
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# message structures to minimize dynamic allocations
|
||||||
|
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||||
|
# a fixed payload size given by this settin (does not include
|
||||||
|
# other message structure overhead.
|
||||||
|
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||||
|
# can be passed to a watchdog handler
|
||||||
|
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||||
|
# structures. The system manages a pool of preallocated
|
||||||
|
# watchdog structures to minimize dynamic allocations
|
||||||
|
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||||
|
# timer structures. The system manages a pool of preallocated
|
||||||
|
# timer structures to minimize dynamic allocations. Set to
|
||||||
|
# zero for all dynamic allocations.
|
||||||
|
#
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=256
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=4
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Filesystem configuration
|
||||||
|
#
|
||||||
|
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||||
|
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||||
|
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||||
|
CONFIG_FS_FAT=n
|
||||||
|
CONFIG_FS_ROMFS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SPI-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_MMCSD_NSLOTS
|
||||||
|
# Number of MMC/SD slots supported by the driver
|
||||||
|
# CONFIG_MMCSD_READONLY
|
||||||
|
# Provide read-only access (default is read/write)
|
||||||
|
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
|
||||||
|
# Default is 20MHz.
|
||||||
|
#
|
||||||
|
CONFIG_MMCSD_NSLOTS=1
|
||||||
|
CONFIG_MMCSD_READONLY=n
|
||||||
|
CONFIG_MMCSD_SPICLOCK=12500000
|
||||||
|
|
||||||
|
#
|
||||||
|
# Block driver buffering
|
||||||
|
#
|
||||||
|
# CONFIG_FS_READAHEAD
|
||||||
|
# Enable read-ahead buffering
|
||||||
|
# CONFIG_FS_WRITEBUFFER
|
||||||
|
# Enable write buffering
|
||||||
|
#
|
||||||
|
CONFIG_FS_READAHEAD=n
|
||||||
|
CONFIG_FS_WRITEBUFFER=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# SDIO-based MMC/SD driver
|
||||||
|
#
|
||||||
|
# CONFIG_SDIO_DMA
|
||||||
|
# SDIO driver supports DMA
|
||||||
|
# CONFIG_MMCSD_MMCSUPPORT
|
||||||
|
# Enable support for MMC cards
|
||||||
|
# CONFIG_MMCSD_HAVECARDDETECT
|
||||||
|
# SDIO driver card detection is 100% accurate
|
||||||
|
#
|
||||||
|
CONFIG_SDIO_DMA=n
|
||||||
|
CONFIG_MMCSD_MMCSUPPORT=n
|
||||||
|
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# TCP/IP and UDP support via uIP
|
||||||
|
# CONFIG_NET - Enable or disable all network features
|
||||||
|
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||||
|
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||||
|
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||||
|
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||||
|
# CONFIG_NET_TCP - TCP support on or off
|
||||||
|
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||||
|
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||||
|
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||||
|
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||||
|
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||||
|
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||||
|
# CONFIG_NET_UDP - UDP support on or off
|
||||||
|
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||||
|
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||||
|
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||||
|
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||||
|
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||||
|
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||||
|
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||||
|
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||||
|
# CONFIG_NET_BROADCAST - Broadcast support
|
||||||
|
# CONFIG_NET_LLH_LEN - The link level header length
|
||||||
|
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||||
|
#
|
||||||
|
CONFIG_NET=n
|
||||||
|
CONFIG_NET_IPv6=n
|
||||||
|
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||||
|
CONFIG_NET_SOCKOPTS=y
|
||||||
|
CONFIG_NET_BUFSIZE=420
|
||||||
|
CONFIG_NET_TCP=n
|
||||||
|
CONFIG_NET_TCP_CONNS=40
|
||||||
|
CONFIG_NET_MAX_LISTENPORTS=40
|
||||||
|
CONFIG_NET_UDP=n
|
||||||
|
CONFIG_NET_UDP_CHECKSUMS=y
|
||||||
|
#CONFIG_NET_UDP_CONNS=10
|
||||||
|
CONFIG_NET_ICMP=n
|
||||||
|
CONFIG_NET_ICMP_PING=n
|
||||||
|
#CONFIG_NET_PINGADDRCONF=0
|
||||||
|
CONFIG_NET_STATISTICS=y
|
||||||
|
#CONFIG_NET_RECEIVE_WINDOW=
|
||||||
|
#CONFIG_NET_ARPTAB_SIZE=8
|
||||||
|
CONFIG_NET_BROADCAST=n
|
||||||
|
#CONFIG_NET_LLH_LEN=14
|
||||||
|
#CONFIG_NET_FWCACHE_SIZE=2
|
||||||
|
|
||||||
|
#
|
||||||
|
# UIP Network Utilities
|
||||||
|
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||||
|
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||||
|
#
|
||||||
|
CONFIG_NET_DHCP_LIGHT=n
|
||||||
|
CONFIG_NET_RESOLV_ENTRIES=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBDEV
|
||||||
|
# Enables USB device support
|
||||||
|
# CONFIG_USBDEV_ISOCHRONOUS
|
||||||
|
# Build in extra support for isochronous endpoints
|
||||||
|
# CONFIG_USBDEV_DUALSPEED
|
||||||
|
# Hardware handles high and full speed operation (USB 2.0)
|
||||||
|
# CONFIG_USBDEV_SELFPOWERED
|
||||||
|
# Will cause USB features to indicate that the device is
|
||||||
|
# self-powered
|
||||||
|
# CONFIG_USBDEV_MAXPOWER
|
||||||
|
# Maximum power consumption in mA
|
||||||
|
# CONFIG_USBDEV_TRACE
|
||||||
|
# Enables USB tracing for debug
|
||||||
|
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||||
|
# Number of trace entries to remember
|
||||||
|
#
|
||||||
|
CONFIG_USBDEV=y
|
||||||
|
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||||
|
CONFIG_USBDEV_DUALSPEED=n
|
||||||
|
CONFIG_USBDEV_SELFPOWERED=y
|
||||||
|
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||||
|
CONFIG_USBDEV_MAXPOWER=100
|
||||||
|
CONFIG_USBDEV_TRACE=n
|
||||||
|
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||||
|
|
||||||
|
#
|
||||||
|
# LPC17xx USB Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_LPC17_USBDEV_FRAME_INTERRUPT
|
||||||
|
# Handle USB Start-Of-Frame events.
|
||||||
|
# Enable reading SOF from interrupt handler vs. simply reading on demand.
|
||||||
|
# Probably a bad idea... Unless there is some issue with sampling the SOF
|
||||||
|
# from hardware asynchronously.
|
||||||
|
# CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT
|
||||||
|
# Enable high priority interrupts. I have no idea why you might want to
|
||||||
|
# do that
|
||||||
|
# CONFIG_LPC17_USBDEV_NDMADESCRIPTORS
|
||||||
|
# Number of DMA descriptors to allocate in SRAM.
|
||||||
|
# CONFIG_LPC17_USBDEV_DMA
|
||||||
|
# Enable lpc17xx-specific DMA support
|
||||||
|
#
|
||||||
|
CONFIG_LPC17_USBDEV_FRAME_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_EPFAST_INTERRUPT=n
|
||||||
|
CONFIG_LPC17_USBDEV_DMA=n
|
||||||
|
CONFIG_LPC17_USBDEV_NDMADESCRIPTORS=0
|
||||||
|
CONFIG_LPC17_USBDEV_DMAINTMASK=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Serial Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSER
|
||||||
|
# Enable compilation of the USB serial driver
|
||||||
|
# CONFIG_USBSER_EPINTIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# interrupt IN operation
|
||||||
|
# CONFIG_USBSER_EPBULKOUT
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk OUT operation
|
||||||
|
# CONFIG_USBSER_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoint that supports
|
||||||
|
# bulk IN operation
|
||||||
|
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||||
|
# Size of the serial receive/transmit buffers
|
||||||
|
#
|
||||||
|
CONFIG_USBSER=n
|
||||||
|
CONFIG_USBSER_EPINTIN=1
|
||||||
|
CONFIG_USBSER_EPBULKOUT=2
|
||||||
|
CONFIG_USBSER_EPBULKIN=5
|
||||||
|
CONFIG_USBSER_NWRREQS=4
|
||||||
|
CONFIG_USBSER_NRDREQS=4
|
||||||
|
CONFIG_USBSER_VENDORID=0x067b
|
||||||
|
CONFIG_USBSER_PRODUCTID=0x2303
|
||||||
|
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||||
|
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||||
|
CONFIG_USBSER_RXBUFSIZE=512
|
||||||
|
CONFIG_USBSER_TXBUFSIZE=512
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Storage Device Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_USBSTRG
|
||||||
|
# Enable compilation of the USB storage driver
|
||||||
|
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||||
|
# Max packet size for endpoint 0
|
||||||
|
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||||
|
# The logical 7-bit address of a hardware endpoints that support
|
||||||
|
# bulk OUT and IN operations
|
||||||
|
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||||
|
# The number of write/read requests that can be in flight
|
||||||
|
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||||
|
# The size of the buffer in each write/read request. This
|
||||||
|
# value needs to be at least as large as the endpoint
|
||||||
|
# maxpacket and ideally as large as a block device sector.
|
||||||
|
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||||
|
# The vendor ID code/string
|
||||||
|
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||||
|
# The product ID code/string
|
||||||
|
# CONFIG_USBSTRG_REMOVABLE
|
||||||
|
# Select if the media is removable
|
||||||
|
#
|
||||||
|
CONFIG_USBSTRG=y
|
||||||
|
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||||
|
CONFIG_USBSTRG_EPBULKOUT=2
|
||||||
|
CONFIG_USBSTRG_EPBULKIN=5
|
||||||
|
CONFIG_USBSTRG_NRDREQS=2
|
||||||
|
CONFIG_USBSTRG_NWRREQS=2
|
||||||
|
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||||
|
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||||
|
CONFIG_USBSTRG_VENDORID=0x584e
|
||||||
|
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||||
|
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||||
|
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||||
|
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||||
|
CONFIG_USBSTRG_REMOVABLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/uip
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nettest
|
||||||
|
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||||
|
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/ostest
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||||
|
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/nsh
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||||
|
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||||
|
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||||
|
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||||
|
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||||
|
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||||
|
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||||
|
# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
|
||||||
|
# specific initialization (nsh_archinitialize()).
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||||
|
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||||
|
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||||
|
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||||
|
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||||
|
#
|
||||||
|
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||||
|
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||||
|
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||||
|
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||||
|
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
|
||||||
|
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||||
|
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||||
|
CONFIG_EXAMPLES_NSH_ARCHINIT=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||||
|
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||||
|
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||||
|
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||||
|
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||||
|
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||||
|
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||||
|
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||||
|
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture-specific NSH options
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||||
|
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/usbserial
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_INONLY
|
||||||
|
# Only verify IN (device-to-host) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
||||||
|
# Only verify OUT (host-to-device) data transfers. Default: both
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
||||||
|
# Send only small, single packet messages. Default: Send large and small.
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
||||||
|
# Send only large, multi-packet messages. Default: Send large and small.
|
||||||
|
#
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||||
|
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||||
|
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Settings for examples/usbstorage
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||||
|
# Defines the number of logical units (LUNs) exported by the USB storage
|
||||||
|
# driver. Each LUN corresponds to one exported block driver (or partition
|
||||||
|
# of a block driver). May be 1, 2, or 3. Default is 1.
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR1
|
||||||
|
# The minor device number of the block driver for the first LUN. For
|
||||||
|
# example, N in /dev/mmcsdN. Used for registering the block driver. Default
|
||||||
|
# is zero.
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVPATH1
|
||||||
|
# The full path to the registered block driver. Default is "/dev/mmcsd0"
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR2 and CONFIG_EXAMPLES_USBSTRG_DEVPATH2
|
||||||
|
# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||||
|
# is 2 or 3. No defaults.
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_DEVMINOR3 and CONFIG_EXAMPLES_USBSTRG_DEVPATH3
|
||||||
|
# Similar parameters that would have to be provided if CONFIG_EXAMPLES_USBSTRG_NLUNS
|
||||||
|
# is 3. No defaults.
|
||||||
|
#
|
||||||
|
# If CONFIG_USBDEV_TRACE is enabled (or CONFIG_DEBUG and CONFIG_DEBUG_USB), then
|
||||||
|
# the example code will also manage the USB trace output. The amount of trace output
|
||||||
|
# can be controlled using:
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACEINIT
|
||||||
|
# Show initialization events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACECLASS
|
||||||
|
# Show class driver events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS
|
||||||
|
# Show data transfer events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER
|
||||||
|
# Show controller events
|
||||||
|
# CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS
|
||||||
|
# Show interrupt-related events.
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_NLUNS=1
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_DEVMINOR1=0
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_DEVPATH1="/dev/mmcsd0"
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACEINIT=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACECLASS=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACETRANSFERS=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACECONTROLLER=n
|
||||||
|
CONFIG_EXAMPLES_USBSTRG_TRACEINTERRUPTS=n
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||||
|
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||||
|
# (should also be =n for the LPC17xx which always runs from flash)
|
||||||
|
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||||
|
# but copy themselves entirely into RAM for better performance.
|
||||||
|
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||||
|
# all stack operations outside of the nuttx model.
|
||||||
|
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||||
|
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||||
|
# This is the thread that (1) performs the inital boot of the system up
|
||||||
|
# to the point where user_start() is spawned, and (2) there after is the
|
||||||
|
# IDLE thread that executes only when there is no other thread ready to
|
||||||
|
# run.
|
||||||
|
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||||
|
# for the main user thread that begins at the user_start() entry point.
|
||||||
|
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||||
|
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||||
|
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||||
|
# CONFIG_HEAP_SIZE - The size of the heap
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_RUNFROMFLASH=n
|
||||||
|
CONFIG_BOOT_COPYTORAM=n
|
||||||
|
CONFIG_CUSTOM_STACK=n
|
||||||
|
CONFIG_STACK_POINTER=
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
CONFIG_HEAP_BASE=
|
||||||
|
CONFIG_HEAP_SIZE=
|
||||||
109
configs/olimex-lpc1766stk/usbstorage/ld.script
Executable file
109
configs/olimex-lpc1766stk/usbstorage/ld.script
Executable file
@ -0,0 +1,109 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* configs/olimex-lpc1766stk/usbstorage/ld.script
|
||||||
|
*
|
||||||
|
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
|
||||||
|
* 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
|
||||||
|
* 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
|
||||||
|
* 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
|
||||||
|
* into the 32Kb CPU SRAM address range.
|
||||||
|
*/
|
||||||
|
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
|
||||||
|
sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
|
||||||
|
}
|
||||||
|
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_stext)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
.text : {
|
||||||
|
_stext = ABSOLUTE(.);
|
||||||
|
*(.vectors)
|
||||||
|
*(.text .text.*)
|
||||||
|
*(.fixup)
|
||||||
|
*(.gnu.warning)
|
||||||
|
*(.rodata .rodata.*)
|
||||||
|
*(.gnu.linkonce.t.*)
|
||||||
|
*(.glue_7)
|
||||||
|
*(.glue_7t)
|
||||||
|
*(.got)
|
||||||
|
*(.gcc_except_table)
|
||||||
|
*(.gnu.linkonce.r.*)
|
||||||
|
_etext = ABSOLUTE(.);
|
||||||
|
} > flash
|
||||||
|
|
||||||
|
_eronly = ABSOLUTE(.); /* See below */
|
||||||
|
|
||||||
|
.data : {
|
||||||
|
_sdata = ABSOLUTE(.);
|
||||||
|
*(.data .data.*)
|
||||||
|
*(.gnu.linkonce.d.*)
|
||||||
|
CONSTRUCTORS
|
||||||
|
_edata = ABSOLUTE(.);
|
||||||
|
} > sram AT > flash
|
||||||
|
|
||||||
|
.ARM.extab : {
|
||||||
|
*(.ARM.extab*)
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.ARM.exidx : {
|
||||||
|
__exidx_start = ABSOLUTE(.);
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = ABSOLUTE(.);
|
||||||
|
} >sram
|
||||||
|
|
||||||
|
.bss : { /* BSS */
|
||||||
|
_sbss = ABSOLUTE(.);
|
||||||
|
*(.bss .bss.*)
|
||||||
|
*(.gnu.linkonce.b.*)
|
||||||
|
*(COMMON)
|
||||||
|
_ebss = ABSOLUTE(.);
|
||||||
|
} > sram
|
||||||
|
/* Stabs debugging sections. */
|
||||||
|
.stab 0 : { *(.stab) }
|
||||||
|
.stabstr 0 : { *(.stabstr) }
|
||||||
|
.stab.excl 0 : { *(.stab.excl) }
|
||||||
|
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||||
|
.stab.index 0 : { *(.stab.index) }
|
||||||
|
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||||
|
.comment 0 : { *(.comment) }
|
||||||
|
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||||
|
.debug_info 0 : { *(.debug_info) }
|
||||||
|
.debug_line 0 : { *(.debug_line) }
|
||||||
|
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||||
|
.debug_aranges 0 : { *(.debug_aranges) }
|
||||||
|
}
|
||||||
47
configs/olimex-lpc1766stk/usbstorage/setenv.sh
Executable file
47
configs/olimex-lpc1766stk/usbstorage/setenv.sh
Executable file
@ -0,0 +1,47 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/olimex-lpc1766stk/usbstorage/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
|
||||||
|
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||||
|
export PATH="${BUILDROOT_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
Loading…
Reference in New Issue
Block a user