sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

More progress on the STM32 OTG FS device driver

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4558 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-04-05 14:12:41 +00:00
parent 39efc9e7f5
commit 3c630dcebe
2 changed files with 2 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
configs/stm3240g-eval/src/up_usbdev.c
View File

@ -79,30 +79,12 @@ void stm32_usbinitialize(void)
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32_OTGFS
stm32_configgpio(GPIO_USB_PULLUP);
stm32_configgpio(GPIO_OTGFS_VBUS);
stm32_configgpio(GPIO_OTGFS_PWRON);
stm32_configgpio(GPIO_OTGFS_OVER);
#endif
}
/************************************************************************************
* Name: stm32_usbpullup
*
* Description:
* If USB is supported and the board supports a pullup via GPIO (for USB software
* connect and disconnect), then the board software must provide stm32_pullup.
* See include/nuttx/usb/usbdev.h for additional description of this method.
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be
* NULL.
*
************************************************************************************/
int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
{
usbtrace(TRACE_DEVPULLUP, (uint16_t)enable);
return OK;
}
/************************************************************************************
* Name: stm32_usbsuspend
*

20
configs/stm32f4discovery/src/up_usbdev.c
View File

@ -79,30 +79,12 @@ void stm32_usbinitialize(void)
/* Configure the OTG FS VBUS sensing GPIO, Power On, and Overcurrent GPIOs */
#ifdef CONFIG_STM32_OTGFS
stm32_configgpio(GPIO_USB_PULLUP);
stm32_configgpio(GPIO_OTGFS_VBUS);
stm32_configgpio(GPIO_OTGFS_PWRON);
stm32_configgpio(GPIO_OTGFS_OVER);
#endif
}
/************************************************************************************
* Name: stm32_usbpullup
*
* Description:
* If USB is supported and the board supports a pullup via GPIO (for USB software
* connect and disconnect), then the board software must provide stm32_pullup.
* See include/nuttx/usb/usbdev.h for additional description of this method.
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be
* NULL.
*
************************************************************************************/
int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
{
usbtrace(TRACE_DEVPULLUP, (uint16_t)enable);
return OK;
}
/************************************************************************************
* Name: stm32_usbsuspend
*