Add support for a separate CCM memory allocator for members of the STM32 family that support CCM memory
This commit is contained in:
Gregory Nutt
parent
3d975e0a08
commit
3d1f29217e
@ -5046,4 +5046,7 @@
|
||||
* drivers/lcd/ug-2864ambag01.c and ug-9664hswag01.c: Add/updated
|
||||
support for reverse portrait mode from lessons learned with the
|
||||
UG-2832HSWEG04. Untested changes! (2013-6-24).
|
||||
|
||||
* arch/arm/src/stm32/stm32_ccm.c and .h: Add support for a seperate CCM
|
||||
heap. This may be useful for segregating allocations for CCM (which
|
||||
cannot be used for DMA) for other allocations (that may be used used
|
||||
for DMA) (2013-6-25).
|
||||
|
||||
@ -486,7 +486,7 @@ config SAM34_RCFAST8M
|
||||
bool "8MHz"
|
||||
|
||||
config SAM34_RCFAST4M
|
||||
bool "4MHz
|
||||
bool "4MHz"
|
||||
|
||||
endchoice
|
||||
endif
|
||||
|
||||
@ -93,6 +93,7 @@ CHIP_CSRCS = stm32_allocateheap.c stm32_start.c stm32_rcc.c stm32_lse.c
|
||||
CHIP_CSRCS += stm32_lsi.c stm32_gpio.c stm32_exti_gpio.c stm32_flash.c stm32_irq.c
|
||||
CHIP_CSRCS += stm32_timerisr.c stm32_dma.c stm32_lowputc.c stm32_serial.c
|
||||
CHIP_CSRCS += stm32_spi.c stm32_sdio.c stm32_tim.c stm32_i2c.c stm32_waste.c
|
||||
CHIP_CSRCS += stm32_ccm.c
|
||||
|
||||
ifeq ($(CONFIG_ARMV7M_CMNVECTOR),y)
|
||||
CHIP_ASRCS += stm32_vectors.S
|
||||
|
||||
65
arch/arm/src/stm32/stm32_ccm.c
Executable file
65
arch/arm/src/stm32/stm32_ccm.c
Executable file
@ -0,0 +1,65 @@
|
||||
/****************************************************************************
|
||||
* arch/arm/src/common/stm32_ccm.c
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
* Based on a prototype by Petteri Amimonen
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include "stm32_ccm.h"
|
||||
|
||||
#ifdef HAVE_CCM_HEAP
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Types
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
struct mm_heap_s g_ccm_heap;
|
||||
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
#endif /* HAVE_CCM_HEAP */
|
||||
136
arch/arm/src/stm32/stm32_ccm.h
Executable file
136
arch/arm/src/stm32/stm32_ccm.h
Executable file
@ -0,0 +1,136 @@
|
||||
/****************************************************************************
|
||||
* arch/arm/src/common/stm32_ccm.h
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
* Based on a prototype by Petteri Amimonen
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_STM32_STM32_CCM_H
|
||||
#define __ARCH_ARM_SRC_STM32_STM32_CCM_H
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <nuttx/mm.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
/* Assume that we can support the CCM heap */
|
||||
|
||||
#define HAVE_CCM_HEAP 1
|
||||
|
||||
/* Only the STM32 F2, F3, and F4 have CCM memory */
|
||||
|
||||
#if defined(CONFIG_STM32_STM32F30XX)
|
||||
# define CCM_START 0x10000000
|
||||
# define CCM_END 0x10002000
|
||||
#elif defined(CONFIG_STM32_STM32F20XX) || defined(CONFIG_STM32_STM32F40XX)
|
||||
# define CCM_START 0x10000000
|
||||
# define CCM_END 0x10010000
|
||||
#else
|
||||
# undef HAVE_CCM_HEAP
|
||||
#endif
|
||||
|
||||
/* In order to use the CCM heap, it had to have been excluded from the main
|
||||
* heap and support for multiple heaps must have been enabled.
|
||||
*/
|
||||
|
||||
#if !defined(CONFIG_STM32_CCMEXCLUDE) || !defined(CONFIG_MM_MULTIHEAP)
|
||||
# undef HAVE_CCM_HEAP
|
||||
#endif
|
||||
|
||||
/* Can we support the CCM heap? */
|
||||
|
||||
#ifdef HAVE_CCM_HEAP
|
||||
|
||||
/* ccm_initialize must be called early in initialization in order to
|
||||
* initialize the CCM heap.
|
||||
*/
|
||||
|
||||
#define ccm_initialize() \
|
||||
mm_initialize(&g_ccm_heap, (uintptr_t)CCM_START, CCM_END-CCM_START)
|
||||
|
||||
/* The ccm_addregion interface could be used if, for example, you want to
|
||||
* add some other memory region to the CCM heap. I don't really know why
|
||||
* you might want to do that, but the functionality is essentially free.
|
||||
*/
|
||||
|
||||
#define ccm_addregion(b,s) mm_addregion(&g_ccm_heap, b, s);
|
||||
|
||||
/* Then, once g_ccm_heap has been setup by ccm_initialize(), these memory
|
||||
* allocators can be used just like the standard memory allocators.
|
||||
*/
|
||||
|
||||
#define ccm_malloc(s) mm_malloc(&g_ccm_heap, s)
|
||||
#define ccm_zalloc(s) mm_zalloc(&g_ccm_heap, s)
|
||||
#define ccm_calloc(n,s) mm_calloc(&g_ccm_heap, n,s)
|
||||
#define ccm_free(p) mm_free(&g_ccm_heap, p)
|
||||
#define ccm_realloc(p,s) mm_realloc(&g_ccm_heap, p, s)
|
||||
#define ccm_memalign(a,s) mm_memalign(&g_ccm_heap, a, s)
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef __cplusplus
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
EXTERN struct mm_heap_s g_ccm_heap;
|
||||
|
||||
/****************************************************************************
|
||||
* Public Function Prototypes
|
||||
****************************************************************************/
|
||||
|
||||
#undef EXTERN
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* HAVE_CCM_HEAP */
|
||||
#endif /* __ARCH_ARM_SRC_STM32_STM32_CCM_H */
|
||||
@ -833,12 +833,12 @@ Configuration sub-directories
|
||||
CONFIG_NXFONT_SANS17X23B=y : Pick a font (any that will fit)
|
||||
|
||||
* This orientation will put the buttons "above" the LCD. The
|
||||
reverse landscape configuration (CONFIG_LCD_RLANDSCAPE) should
|
||||
"flip" the display so that the buttons are "below" the LCD. That
|
||||
configuration, however, is untested.
|
||||
reverse landscape configuration (CONFIG_LCD_RLANDSCAPE) will
|
||||
"flip" the display so that the buttons are "below" the LCD.
|
||||
|
||||
** The hardware is write only, but the driver maintains a frame buffer
|
||||
to support read and read-write-modiry operations on the LCD.
|
||||
Reading from the frame buffer is, however, untested.
|
||||
|
||||
Then, in order to use the OLED, you will need to build some kind of
|
||||
graphics application or use one of the NuttX graphics examples.
|
||||
@ -855,6 +855,15 @@ Configuration sub-directories
|
||||
The default "colors" will give you while text on a black background.
|
||||
You can override the faults it you want black text on a while background.
|
||||
|
||||
NOTE: One issue that I have seen with the NXHello example when
|
||||
running as an NSH command is that it only works the first time.
|
||||
So, after you run the 'nxhello' command one time, you will have to
|
||||
reset the board before you run it again.
|
||||
|
||||
This is clearly some issue with initializing, un-initializing, and
|
||||
then re-initializing. If you want to fix this, patches are quite
|
||||
welcome.
|
||||
|
||||
4. If the LCD1 module is connected to the SAM4L Xplained Pro, then
|
||||
support for the SLCDt can be enabled by making the following
|
||||
changes to the configuration:
|
||||
|
||||
@ -54,6 +54,12 @@
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ********************************************************************/
|
||||
|
||||
#if defined(CONFIG_SAM4L_XPLAINED_IOMODULE) && \
|
||||
defined(CONFIG_SAM4L_XPLAINED_OLED1MODULE) && defined(CONFIG_SPI_OWNBUS)
|
||||
# error CONFIG_SPI_OWNBUS must not defined if using both I/O1 and OLED1 modules
|
||||
#endif
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
|
||||
|
||||
|
||||
@ -69,6 +69,7 @@ CONFIG_ARCH="arm"
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
@ -76,7 +77,7 @@ CONFIG_ARCH="arm"
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
@ -85,6 +86,7 @@ CONFIG_ARCH_CHIP="stm32"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
CONFIG_ARCH_HAVE_FPU=y
|
||||
# CONFIG_ARCH_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
@ -98,12 +100,31 @@ CONFIG_ARCH_HAVE_MPU=y
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
|
||||
# CONFIG_SERIAL_TERMIOS is not set
|
||||
|
||||
#
|
||||
# STM32 Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_STM32L151C6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151R6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151V6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L151VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152C6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152R6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152V6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32L152VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
|
||||
@ -116,6 +137,8 @@ CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARCH_CHIP_STM32F100VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VD is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103C4 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
|
||||
@ -144,6 +167,20 @@ CONFIG_ARCH_CHIP_STM32F407VG=y
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F427V is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F427Z is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F427I is not set
|
||||
# CONFIG_STM32_STM32L15XX is not set
|
||||
# CONFIG_STM32_ENERGYLITE is not set
|
||||
# CONFIG_STM32_STM32F10XX is not set
|
||||
# CONFIG_STM32_VALUELINE is not set
|
||||
# CONFIG_STM32_CONNECTIVITYLINE is not set
|
||||
# CONFIG_STM32_PERFORMANCELINE is not set
|
||||
# CONFIG_STM32_HIGHDENSITY is not set
|
||||
# CONFIG_STM32_MEDIUMDENSITY is not set
|
||||
# CONFIG_STM32_LOWDENSITY is not set
|
||||
# CONFIG_STM32_STM32F20XX is not set
|
||||
# CONFIG_STM32_STM32F30XX is not set
|
||||
CONFIG_STM32_STM32F40XX=y
|
||||
# CONFIG_STM32_DFU is not set
|
||||
|
||||
@ -170,7 +207,6 @@ CONFIG_STM32_STM32F40XX=y
|
||||
# CONFIG_STM32_I2C1 is not set
|
||||
# CONFIG_STM32_I2C2 is not set
|
||||
# CONFIG_STM32_I2C3 is not set
|
||||
# CONFIG_STM32_IWDG is not set
|
||||
CONFIG_STM32_OTGFS=y
|
||||
# CONFIG_STM32_OTGHS is not set
|
||||
CONFIG_STM32_PWR=y
|
||||
@ -200,6 +236,7 @@ CONFIG_STM32_USART2=y
|
||||
# CONFIG_STM32_UART4 is not set
|
||||
# CONFIG_STM32_UART5 is not set
|
||||
# CONFIG_STM32_USART6 is not set
|
||||
# CONFIG_STM32_IWDG is not set
|
||||
# CONFIG_STM32_WWDG is not set
|
||||
CONFIG_STM32_SPI=y
|
||||
|
||||
@ -211,6 +248,7 @@ CONFIG_STM32_SPI=y
|
||||
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
|
||||
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
|
||||
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||
# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set
|
||||
# CONFIG_STM32_FORCEPOWER is not set
|
||||
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
|
||||
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||
@ -279,6 +317,7 @@ CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
|
||||
# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="stm32f4discovery"
|
||||
|
||||
@ -379,6 +418,7 @@ CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
@ -388,7 +428,6 @@ CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
@ -407,6 +446,10 @@ CONFIG_USART2_BAUD=115200
|
||||
CONFIG_USART2_BITS=8
|
||||
CONFIG_USART2_PARITY=0
|
||||
CONFIG_USART2_2STOP=0
|
||||
# CONFIG_USART2_IFLOWCONTROL is not set
|
||||
# CONFIG_USART2_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
@ -437,6 +480,7 @@ CONFIG_USART2_2STOP=0
|
||||
# CONFIG_FS_FAT is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_BINFS is not set
|
||||
|
||||
#
|
||||
@ -458,6 +502,11 @@ CONFIG_USART2_2STOP=0
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
@ -483,6 +532,7 @@ CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
@ -502,6 +552,7 @@ CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
@ -544,8 +595,9 @@ CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
@ -566,6 +618,10 @@ CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
@ -662,9 +718,15 @@ CONFIG_NSH_BUILTIN_APPS=y
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
@ -699,9 +761,8 @@ CONFIG_NSH_CONSOLE=y
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# RAM Test
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
|
||||
Loading…
Reference in New Issue
Block a user