configs/ea3131/pgnsh: Configuration converted to use the kconfig-frontends tools

configs/ea3131/README.txt

@@ -603,17 +603,41 @@ ARM/EA3131-specific Configuration Options
 Configurations
 ^^^^^^^^^^^^^^
 
-Each EA3131 configuration is maintained in a sub-directory and can be
-selected as follow:
+Common Configuration Notes
+--------------------------
+
+  1. Each EA3131 configuration is maintained in a sub-directory and
+     can be selected as follow:
 
        cd tools
        ./configure.sh ea3131/<subdir>
        cd -
        . ./setenv.sh
 
-Where <subdir> is one of the following:
+     Where <subdir> is one of the configuration sub-directories described in
+     the following paragraph.
+
+  2. These configurations use the mconf-based configuration tool.  To
+     change a configurations using that tool, you should:
+
+     a. Build and install the kconfig-mconf tool.  See nuttx/README.txt
+        and misc/tools/
+
+     b. Execute 'make menuconfig' in nuttx/ in order to start the
+        reconfiguration process.
+
+  3. By default, all configurations assume the CodeSourcery toolchain
+     under Cygwin with Windows.  This is easily reconfigured, however:
+
+        CONFIG_HOST_WINDOWS=y
+        CONFIG_WINDOWS_CYGWIN=y
+        CONFIG_ARM_TOOLCHAIN_CODESOURCERYW=y
+
+Configuration Sub-Directories
+-----------------------------
+
+  locked:
 
-  locked
     This is not a configuration.  When on-demand page is enabled
     then we must do a two pass link:  The first pass creates an
     intermediate object that has all of the code that must be
@@ -623,18 +647,21 @@ Where <subdir> is one of the following:
     The directory contains the logic necessary to do the platform
     specific first pass link for the EA313x.
 
-  nsh:
+  nsh
+
     Configures the NuttShell (nsh) located at examples/nsh.  The
     Configuration enables only the serial NSH interface.
 
-  pgnsh:
+  pgnsh
+
     This is the same configuration as nsh, but with On-Demand
-    paging enabled.  See http://www.nuttx.org/NuttXDemandPaging.html.
+    paging enabled.  See http://www.nuttx.org/Documentation/NuttXDemandPaging.html.
     This configuration is an experiment for the purposes of test
     and debug.  At present, this does not produce functioning,
     usable system
 
-  usbserial:
+  usbserial
+
     This configuration directory exercises the USB serial class
     driver at examples/usbserial.  See examples/README.txt for
     more information.

configs/ea3131/pgnsh/appconfig

@@ -1,45 +0,0 @@
-############################################################################
-# configs/ea3131/pgnsh/appconfig
-#
-#   Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
-#   Author: Gregory Nutt <gnutt@nuttx.org>
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in
-#    the documentation and/or other materials provided with the
-#    distribution.
-# 3. Neither the name NuttX nor the names of its contributors may be
-#    used to endorse or promote products derived from this software
-#    without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
-# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
-# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
-# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
-# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
-# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
-# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-# POSSIBILITY OF SUCH DAMAGE.
-#
-############################################################################
-
-# Path to example in apps/examples containing the user_start entry point
-
-CONFIGURED_APPS += examples/nsh
-
-# The NSH library
-
-CONFIGURED_APPS += system/readline
-CONFIGURED_APPS += nshlib
-
-

configs/ea3131/usbserial/defconfig

@@ -8,11 +8,14 @@ CONFIG_NUTTX_NEWCONFIG=y
 # Build Setup
 #
 # CONFIG_EXPERIMENTAL is not set
-# CONFIG_DEFAULT_SMALL is not set
-CONFIG_HOST_LINUX=y
+# CONFIG_HOST_LINUX is not set
 # CONFIG_HOST_OSX is not set
-# CONFIG_HOST_WINDOWS is not set
+CONFIG_HOST_WINDOWS=y
 # CONFIG_HOST_OTHER is not set
+# CONFIG_WINDOWS_NATIVE is not set
+CONFIG_WINDOWS_CYGWIN=y
+# CONFIG_WINDOWS_MSYS is not set
+# CONFIG_WINDOWS_OTHER is not set
 
 #
 # Build Configuration
@@ -106,8 +109,10 @@ CONFIG_ARCH_ROMPGTABLE=y
 # ARM Configuration Options
 #
 # CONFIG_ARM_TOOLCHAIN_BUILDROOT is not set
-CONFIG_ARM_TOOLCHAIN_CODESOURCERYL=y
+CONFIG_ARM_TOOLCHAIN_CODESOURCERYW=y
+# CONFIG_ARM_TOOLCHAIN_DEVKITARM is not set
 # CONFIG_ARM_TOOLCHAIN_GNU_EABIL is not set
+# CONFIG_ARM_TOOLCHAIN_GNU_EABIW is not set
 # CONFIG_ARM_TOOLCHAIN_GNU_OABI is not set
 CONFIG_ARCH_HAVE_EXTNAND=y
 CONFIG_ARCH_HAVE_EXTDRAM=y