diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3343d7c474..6550950e73 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -216,12 +216,6 @@ config PAGING If set =y in your configation file, this setting will enable the on-demand paging feature as described in http://www.nuttx.org/NuttXDemandPaging.html. -config ARCH_LEDS - bool "Use board LEDs to show state" - default y - ---help--- - Use LEDs to show state. Unique to boards that have LEDs - config ARCH_INTERRUPTSTACK bool "Use interrupt stack" default y diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 0d34ac2c8a..cfa3d589d4 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -27,12 +27,6 @@ config ARCH_CHIP string default "pic32mx" if ARCH_CHIP_PIC32MX -config ARCH_LEDS - bool "Use board LEDs to show state" - default y - ---help--- - Use LEDs to show state. Unique to boards that have LEDs - config ARCH_INTERRUPTSTACK bool "Use interrupt stack" default y diff --git a/configs/Kconfig b/configs/Kconfig index 01a34e8a7f..89b742082d 100644 --- a/configs/Kconfig +++ b/configs/Kconfig @@ -23,6 +23,9 @@ config ARCH_BOARD_AMBER config ARCH_BOARD_AVR32DEV1 bool "Atmel AVR32DEV1 board" depends on ARCH_CHIP_AT32UC3B0256 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- This is a port of NuttX to the Atmel AVR32DEV1 board. That board is based on the Atmel AT32UC3B0256 MCU and uses a specially patched @@ -34,6 +37,7 @@ config ARCH_BOARD_AVR32DEV1 config ARCH_BOARD_C5471EVM bool "Spectrum Digital C5471 evaluation board" depends on ARCH_CHIP_C5471 + select ARCH_HAVE_LEDS ---help--- This is a port to the Spectrum Digital C5471 evaluation board. The TMS320C5471 is a dual core processor from TI with an ARM7TDMI general @@ -62,6 +66,8 @@ config ARCH_BOARD_COMPALE99 config ARCH_BOARD_DEMOS92S12NEC64 bool "Freescale DMO9S12NE64 board" depends on ARCH_CHIP_MCS92S12NEC64 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- Freescale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it @@ -70,6 +76,8 @@ config ARCH_BOARD_DEMOS92S12NEC64 config ARCH_BOARD_EA3131 bool "Embedded Artists EA3131 Development board" depends on ARCH_CHIP_LPC3131 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3131 Development board. This board is based on the an NXP LPC3131 MCU. This OS is built with the arm-elf toolchain*. @@ -78,6 +86,8 @@ config ARCH_BOARD_EA3131 config ARCH_BOARD_EA3152 bool "Embedded Artists EA3152 Development board" depends on ARCH_CHIP_LPC3152 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- Embedded Artists EA3152 Development board. This board is based on the an NXP LPC3152 MCU. This OS is built with the arm-elf toolchain*. @@ -87,6 +97,7 @@ config ARCH_BOARD_EA3152 config ARCH_BOARD_EAGLE100 bool "Micromint Eagle-100 Development board" depends on ARCH_CHIP_LM3S6918 + select ARCH_HAVE_LEDS ---help--- Micromint Eagle-100 Development board. This board is based on the an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the @@ -95,6 +106,7 @@ config ARCH_BOARD_EAGLE100 config ARCH_BOARD_EKK_LM3S9B96 bool "TI/Stellaris EKK-LM3S9B96" depends on ARCH_CHIP_LM3S9B96 + select ARCH_HAVE_LEDS ---help--- TI/Stellaris EKK-LM3S9B96 board. This board is based on the an EKK-LM3S9B96 which is a Cortex-M3. @@ -102,6 +114,7 @@ config ARCH_BOARD_EKK_LM3S9B96 config ARCH_BOARD_EZ80F910200KITG bool "ZiLOG ez80f0910200kitg development kit" depends on ARCH_CHIP_EZ80F91 + select ARCH_HAVE_LEDS ---help--- ez80Acclaim! Microcontroller. This port use the ZiLOG ez80f0910200kitg development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line @@ -110,6 +123,8 @@ config ARCH_BOARD_EZ80F910200KITG config ARCH_BOARD_EZ80F910200ZCO bool "ZiLOG ez80f0910200zco development kit" depends on ARCH_CHIP_EZ80F91 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200zco development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line @@ -118,6 +133,9 @@ config ARCH_BOARD_EZ80F910200ZCO config ARCH_BOARD_HYMINI_STM32V bool "HY-Mini STM32v board" depends on ARCH_CHIP_STM32F103VCT + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- A configuration for the HY-Mini STM32v board. This board is based on the STM32F103VCT chip. @@ -125,12 +143,18 @@ config ARCH_BOARD_HYMINI_STM32V config ARCH_BOARD_LINCOLN60 bool "Micromint Lincoln 60 board" depends on ARCH_CHIP_LPC1769 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- Micromint Lincoln 60 board using the NXP LPC1769 MCU. config ARCH_BOARD_KWIKSTIK_K40 bool "FreeScale KwikStik-K40 development board" depends on ARCH_CHIP_MK40X256VLQ100 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- Kinetis K40 Cortex-M4 MCU. This port uses the FreeScale KwikStik-K40 development board. @@ -138,6 +162,7 @@ config ARCH_BOARD_KWIKSTIK_K40 config ARCH_BOARD_LM3S6432S2E bool "Stellaris RDK-S2E Reference Design Kit" depends on ARCH_CHIP_LM3S6432 + select ARCH_HAVE_LEDS ---help--- Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to Serial module. @@ -145,6 +170,7 @@ config ARCH_BOARD_LM3S6432S2E config ARCH_BOARD_LM3S6965EK bool "Stellaris LM3S6965 Evaluation Kit" depends on ARCH_CHIP_LM3S6965 + select ARCH_HAVE_LEDS ---help--- Stellaris LM3S6965 Evaluation Kit. This board is based on the an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the @@ -153,6 +179,7 @@ config ARCH_BOARD_LM3S6965EK config ARCH_BOARD_LM3S8962EK bool "Stellaris LMS38962 Evaluation Kit" depends on ARCH_CHIP_LM3S8962 + select ARCH_HAVE_LEDS ---help--- Stellaris LMS38962 Evaluation Kit. @@ -166,6 +193,9 @@ config ARCH_BOARD_LPCXPRESSO config ARCH_BOARD_LPC4330_XPLORER bool "NXG LPC4330-Xplorer" depends on ARCH_CHIP_LPC4330FET100 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- NXG Technologoies LPC4330 Xplorer board. This board is based on the LPC4330FET100. The Code Red toolchain is used by default. @@ -181,6 +211,7 @@ config ARCH_BOARD_M68332EVB config ARCH_BOARD_MBED bool "mbed LCP1768" depends on ARCH_CHIP_LPC1768 + select ARCH_HAVE_LEDS ---help--- The configurations in this directory support the mbed board (http://mbed.org) that features the NXP LPC1768 microcontroller. This OS is also built @@ -189,6 +220,7 @@ config ARCH_BOARD_MBED config ARCH_BOARD_MCU123 bool "mcu123.com LPC2148 Development Board" depends on ARCH_CHIP_LPC2148 + select ARCH_HAVE_LEDS ---help--- This port is for the NXP LPC2148 as provided on the mcu123.com lpc214x development board. This OS is also built with the arm-elf @@ -205,6 +237,7 @@ config ARCH_BOARD_MICROPENDOUS3 config ARCH_BOARD_MX1ADS bool "Motorola MX1ADS development board" depends on ARCH_CHIP_IMX1 + select ARCH_HAVE_LEDS ---help--- This is a port to the Motorola MX1ADS development board. That board is based on the Freescale i.MX1 processor. The i.MX1 is an ARM920T. @@ -214,6 +247,8 @@ config ARCH_BOARD_MX1ADS config ARCH_BOARD_NE64BADGE bool "FEG NE64 /PoE Badge board" depends on ARCH_CHIP_MCS92S12NEC64 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- Future Electronics Group NE64 /PoE Badge board based on the MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain. @@ -223,6 +258,7 @@ config ARCH_BOARD_NE64BADGE config ARCH_BOARD_NTOSD_DM320 bool "Neuros OSD v1.0 Dev Board" depends on ARCH_CHIP_DM320 + select ARCH_HAVE_LEDS ---help--- This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-elf toolchain*: see @@ -241,6 +277,7 @@ config ARCH_BOARD_NTOSD_DM320 config ARCH_BOARD_NUCLEUS2G bool "Nucleus 2G board" depends on ARCH_CHIP_LPC1768 + select ARCH_HAVE_LEDS ---help--- This port uses the Nucleus 2G board (with Babel CAN board). This board features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/) @@ -249,6 +286,9 @@ config ARCH_BOARD_NUCLEUS2G config ARCH_BOARD_LPC1766STK bool "Olimex LPC1766-STK board" depends on ARCH_CHIP_LPC1766 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under Linux or Cygwin. STATUS: Complete and mature. @@ -256,6 +296,7 @@ config ARCH_BOARD_LPC1766STK config ARCH_BOARD_MIRTOO bool "Mirtoo PIC32 Module from Dimitech" depends on ARCH_CHIP_PIC32MX250F128D + select ARCH_HAVE_LEDS ---help--- This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip PIC32MX250F128D. See http://www.dimitech.com/ for further information. @@ -263,6 +304,7 @@ config ARCH_BOARD_MIRTOO config ARCH_BOARD_OLIMEXLPC2378 bool "Olimex-lpc2378 board" depends on ARCH_CHIP_LPC2378 + select ARCH_HAVE_LEDS ---help--- This port uses the Olimex-lpc2378 board and a GNU arm-elf toolchain* under Linux or Cygwin. STATUS: ostest and NSH configurations available. @@ -271,6 +313,8 @@ config ARCH_BOARD_OLIMEXLPC2378 config ARCH_BOARD_OLIMEX_STRP711 bool "Olimex STR-P711 board" depends on ARCH_CHIP_STR71X + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- This port uses the Olimex STR-P711 board and a GNU arm-elf toolchain* under Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for @@ -299,6 +343,7 @@ config ARCH_BOARD_PCBLOGICPIC32MX config ARCH_BOARD_PIC32_STARTERKIT bool "Microchip PIC32 Ethernet Starter Kit (DM320004)" depends on ARCH_CHIP_PIC32MX795F512L + select ARCH_HAVE_LEDS ---help--- This is the port of NuttX to the Microchip PIC32 Ethernet Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005). @@ -307,6 +352,7 @@ config ARCH_BOARD_PIC32_STARTERKIT config ARCH_BOARD_PIC32_PIC32MX7MMB bool "Mikroelektronika PIC32MX7 MMB" depends on ARCH_CHIP_PIC32MX795F512L + select ARCH_HAVE_LEDS ---help--- This is the port NuttX to the Mikroelektronika PIC32MX7 Multimedia Board (MMB). See http://www.mikroe.com/ for further information. @@ -314,6 +360,7 @@ config ARCH_BOARD_PIC32_PIC32MX7MMB config ARCH_BOARD_PJRC_87C52 bool "PJRC 87C52 development system" depends on ARCH_CHIP_8052 + select ARCH_HAVE_LEDS ---help--- 8051 Microcontroller. This port uses the PJRC 87C52 development system and the SDCC toolchain. This port is not quite ready for prime time. @@ -341,12 +388,18 @@ config ARCH_BOARD_RGMP config ARCH_BOARD_SAM3UEK bool "Atmel SAM3U-EK development board" depends on ARCH_CHIP_AT91SAM3U4E + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- The port of NuttX to the Atmel SAM3U-EK development board. config ARCH_BOARD_SHENZHOU bool "Shenzhou STM32F107 board" depends on ARCH_CHIP_STM32F107VC + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- This port uses the Shenzhou STM32 F107 board and a GNU arm-elf toolchain* under Linux or Cygwin. See the http://www.armjishu.com for further information. This @@ -355,6 +408,8 @@ config ARCH_BOARD_SHENZHOU config ARCH_BOARD_SKP16C26 bool "Renesas SKP16C26 StarterKit" depends on ARCH_CHIP_M30262F8 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port uses the GNU m32c toolchain. STATUS: The port is complete but untested @@ -363,6 +418,9 @@ config ARCH_BOARD_SKP16C26 config ARCH_BOARD_STM3210E_EVAL bool "STMicro STM3210E-EVAL development board" depends on ARCH_CHIP_STM32F103ZET6 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6 microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3 @@ -371,6 +429,9 @@ config ARCH_BOARD_STM3210E_EVAL config ARCH_BOARD_STM3220G_EVAL bool "STMicro STM3220G-EVAL development board" depends on ARCH_CHIP_STM32F207IG + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG microcontroller (ARM Cortex-M3). @@ -378,6 +439,9 @@ config ARCH_BOARD_STM3220G_EVAL config ARCH_BOARD_STM3240G_EVAL bool "STMicro STM3240G-EVAL development board" depends on ARCH_CHIP_STM32F407IG + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6 microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4 @@ -386,12 +450,18 @@ config ARCH_BOARD_STM3240G_EVAL config ARCH_BOARD_STM32F4_DISCOVERY bool "STMicro STM32F4-Discovery board" depends on ARCH_CHIP_STM32F407VG + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- STMicro STM32F4-Discovery board boased on the STMIcro STM32F407VGT6 MCU. config ARCH_BOARD_SUREPIC32MX bool "Sure PIC32MX boards" depends on ARCH_CHIP_PIC32MX440F512H + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure Electronics (http://www.sureelectronics.net/). This board features @@ -402,6 +472,7 @@ config ARCH_BOARD_SUREPIC32MX config ARCH_BOARD_TEENSY bool "PJRC Teensy++ 2.0 board" depends on ARCH_CHIP_AT90USB1286 + select ARCH_HAVE_LEDS ---help--- This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based @@ -410,6 +481,9 @@ config ARCH_BOARD_TEENSY config ARCH_BOARD_TWR_K60N512 bool "FreeScale TWR-K60N512d evelopment board" depends on ARCH_CHIP_MK60N512VMD100 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512 development board. @@ -417,6 +491,9 @@ config ARCH_BOARD_TWR_K60N512 config ARCH_BOARD_UBW32 bool "UBW32 v2.4 board from Sparkfun" depends on ARCH_CHIP_PIC32MX460F512L + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + select ARCH_HAVE_IRQBUTTONS ---help--- This is the port to the Sparkfun UBW32 board. This port uses the original v2.4 board which is based on the MicroChip PIC32MX460F512L. See @@ -427,6 +504,7 @@ config ARCH_BOARD_UBW32 config ARCH_BOARD_US7032EVB1 bool "Hitachi SH-1/US7032EVB1 board" depends on ARCH_CHIP_SH7032 + select ARCH_HAVE_LEDS ---help--- This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board. STATUS: Work has just began on this port. @@ -434,6 +512,8 @@ config ARCH_BOARD_US7032EVB1 config ARCH_BOARD_VSN bool "SOTEL NetClamps VSN sensor network platform" depends on ARCH_CHIP_STM32F103RET6 + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS ---help--- ISOTEL NetClamps VSN V1.2 ready2go sensor network platform based on the STMicro STM32F103RET6. Contributed by Uros Platise. See @@ -450,6 +530,7 @@ config ARCH_BOARD_XTRS config ARCH_BOARD_Z16F2800100ZCOG bool "Zilog Z16F2800100ZCOG Development Kit" depends on ARCH_CHIP_Z16F281 + select ARCH_HAVE_LEDS ---help--- z16f Microcontroller. This port use the ZiLIG z16f2800100zcog development kit and the Zilog ZDS-II Windows command line tools. The @@ -468,6 +549,7 @@ config ARCH_BOARD_Z80SIM config ARCH_BOARD_Z8ENCORE000ZCO bool "ZiLOG z8encore000zco Development Kit" depends on ARCH_CHIP_Z8F6403 + select ARCH_HAVE_LEDS ---help--- z8Encore! Microcontroller. This port use the ZiLOG z8encore000zco development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line @@ -476,6 +558,7 @@ config ARCH_BOARD_Z8ENCORE000ZCO config ARCH_BOARD_Z8F64200100KI bool "ZiLOG Z8F64200100KIT Development Kit" depends on ARCH_CHIP_Z8F642X + select ARCH_HAVE_LEDS ---help--- z8Encore! Microcontroller. This port use the Zilog z8f64200100kit development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line @@ -562,6 +645,37 @@ config ARCH_BOARD default "sim" if ARCH_BOARD_SIM default "" if ARCH_BOARD_CUSTOM +comment "Common Board Options" + +config ARCH_HAVE_LEDS + bool + +config ARCH_LEDS + bool "Board LEDs support" + default y + depends on ARCH_HAVE_LEDS + ---help--- + Use board LEDs to show NuttX execution status state. Unique to boards that have LEDs + +config ARCH_HAVE_BUTTONS + bool + +config ARCH_BUTTONS + bool "Board button support" + default n + depends on ARCH_HAVE_BUTTONS + ---help--- + "Support interfaces to use buttons provided by the board." + +config ARCH_IRQBUTTONS + bool "Button interrupt support" + default n + depends on ARCH_BUTTONS && ARCH_HAVE_IRQBUTTONS + ---help--- + "Support interrupts on button presses and releases." + +comment "Board-Specific Options" + if ARCH_BOARD_AMBER source "configs/amber/Kconfig" endif diff --git a/configs/avr32dev1/Kconfig b/configs/avr32dev1/Kconfig index 017aaf5124..3312fdfd45 100644 --- a/configs/avr32dev1/Kconfig +++ b/configs/avr32dev1/Kconfig @@ -4,24 +4,5 @@ # if ARCH_BOARD_AVR32DEV1 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support interrupts on button presses and releases." - endif diff --git a/configs/demo9s12ne64/Kconfig b/configs/demo9s12ne64/Kconfig index 1dd59710d3..3f685365b3 100644 --- a/configs/demo9s12ne64/Kconfig +++ b/configs/demo9s12ne64/Kconfig @@ -4,17 +4,5 @@ # if ARCH_BOARD_DEMOS92S12NEC64 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/ea3131/Kconfig b/configs/ea3131/Kconfig index 705599f340..ee64802ddf 100644 --- a/configs/ea3131/Kconfig +++ b/configs/ea3131/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_EA3131 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/ea3152/Kconfig b/configs/ea3152/Kconfig index fe027ea91c..c23751a3d2 100644 --- a/configs/ea3152/Kconfig +++ b/configs/ea3152/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_EA3152 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/hymini-stm32v/Kconfig b/configs/hymini-stm32v/Kconfig index f6bc7f233d..860c1d32b3 100644 --- a/configs/hymini-stm32v/Kconfig +++ b/configs/hymini-stm32v/Kconfig @@ -4,23 +4,4 @@ # if ARCH_BOARD_HYMINI_STM32V -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support EXTI interrupts on button presses and releases." - endif diff --git a/configs/kwikstik-k40/Kconfig b/configs/kwikstik-k40/Kconfig index 3342a978bc..5172da5e7e 100644 --- a/configs/kwikstik-k40/Kconfig +++ b/configs/kwikstik-k40/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_KWIKSTIK_K40 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/lincoln60/Kconfig b/configs/lincoln60/Kconfig index a912484576..113d41d7fd 100644 --- a/configs/lincoln60/Kconfig +++ b/configs/lincoln60/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_LINCOLN60 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/lpc4330-xplorer/Kconfig b/configs/lpc4330-xplorer/Kconfig index b3bdb01d0f..82597636d9 100644 --- a/configs/lpc4330-xplorer/Kconfig +++ b/configs/lpc4330-xplorer/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_LPC4330_XPLORER -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/ne64badge/Kconfig b/configs/ne64badge/Kconfig index e3ac8b4e96..44fb67fdf4 100644 --- a/configs/ne64badge/Kconfig +++ b/configs/ne64badge/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_NE64BADGE -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/olimex-lpc1766stk/Kconfig b/configs/olimex-lpc1766stk/Kconfig index 659e49e41f..b86dd2342a 100644 --- a/configs/olimex-lpc1766stk/Kconfig +++ b/configs/olimex-lpc1766stk/Kconfig @@ -4,23 +4,4 @@ # if ARCH_BOARD_LPC1766STK -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support interrupts on button presses and releases." - endif diff --git a/configs/olimex-stm32-p107/Kconfig b/configs/olimex-stm32-p107/Kconfig index 89adc58ffe..b0b8a29d6c 100644 --- a/configs/olimex-stm32-p107/Kconfig +++ b/configs/olimex-stm32-p107/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_OLIMEX_STM32P107 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/olimex-strp711/Kconfig b/configs/olimex-strp711/Kconfig index d8ee9b186d..9771aba6df 100644 --- a/configs/olimex-strp711/Kconfig +++ b/configs/olimex-strp711/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_OLIMEX_STRP711 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/sam3u-ek/Kconfig b/configs/sam3u-ek/Kconfig index 79559a3d1e..f4daa81fe3 100644 --- a/configs/sam3u-ek/Kconfig +++ b/configs/sam3u-ek/Kconfig @@ -4,23 +4,4 @@ # if ARCH_BOARD_SAM3UEK -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support interrupts on button presses and releases." - endif diff --git a/configs/shenzhou/Kconfig b/configs/shenzhou/Kconfig index c6be488702..92d2940995 100644 --- a/configs/shenzhou/Kconfig +++ b/configs/shenzhou/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_SHENZHOU -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/shenzhou/src/up_leds.c b/configs/shenzhou/src/up_leds.c deleted file mode 100644 index c7ce0b909c..0000000000 --- a/configs/shenzhou/src/up_leds.c +++ /dev/null @@ -1,401 +0,0 @@ -/**************************************************************************** - * configs/shenzhou/src/up_leds.c - * arch/arm/src/board/up_leds.c - * - * Copyright (C) 2012 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * 3. Neither the name NuttX nor the names of its contributors may be - * used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS - * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE - * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED - * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN - * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************/ - -/**************************************************************************** - * Included Files - ****************************************************************************/ - -#include - -#include -#include -#include - -#include -#include - -#include "chip.h" -#include "up_arch.h" -#include "up_internal.h" -#include "stm32_internal.h" -#include "shenzhou-internal.h" - -/**************************************************************************** - * Definitions - ****************************************************************************/ - -/* Enables debug output from this file (needs CONFIG_DEBUG with - * CONFIG_DEBUG_VERBOSE too) - */ - -#undef LED_DEBUG /* Define to enable debug */ - -#ifdef LED_DEBUG -# define leddbg lldbg -# define ledvdbg llvdbg -#else -# define leddbg(x...) -# define ledvdbg(x...) -#endif - -/* The following definitions map the encoded LED setting to GPIO settings */ - -#define SHENZHOU_LED1 (1 << 0) -#define SHENZHOU_LED2 (1 << 1) -#define SHENZHOU_LED3 (1 << 2) -#define SHENZHOU_LED4 (1 << 3) - -#define ON_SETBITS_SHIFT (0) -#define ON_CLRBITS_SHIFT (4) -#define OFF_SETBITS_SHIFT (8) -#define OFF_CLRBITS_SHIFT (12) - -#define ON_BITS(v) ((v) & 0xff) -#define OFF_BITS(v) (((v) >> 8) & 0x0ff) -#define SETBITS(b) ((b) & 0x0f) -#define CLRBITS(b) (((b) >> 4) & 0x0f) - -#define ON_SETBITS(v) (SETBITS(ON_BITS(v)) -#define ON_CLRBITS(v) (CLRBITS(ON_BITS(v)) -#define OFF_SETBITS(v) (SETBITS(OFF_BITS(v)) -#define OFF_CLRBITS(v) (CLRBITS(OFF_BITS(v)) - -#define LED_STARTED_ON_SETBITS ((SHENZHOU_LED1) << ON_SETBITS_SHIFT) -#define LED_STARTED_ON_CLRBITS ((SHENZHOU_LED2|SHENZHOU_LED3|SHENZHOU_LED4) << ON_CLRBITS_SHIFT) -#define LED_STARTED_OFF_SETBITS (0 << OFF_SETBITS_SHIFT) -#define LED_STARTED_OFF_CLRBITS ((SHENZHOU_LED1|SHENZHOU_LED2|SHENZHOU_LED3|SHENZHOU_LED4) << OFF_CLRBITS_SHIFT) - -#define LED_HEAPALLOCATE_ON_SETBITS ((SHENZHOU_LED2) << ON_SETBITS_SHIFT) -#define LED_HEAPALLOCATE_ON_CLRBITS ((SHENZHOU_LED1|SHENZHOU_LED3|SHENZHOU_LED4) << ON_CLRBITS_SHIFT) -#define LED_HEAPALLOCATE_OFF_SETBITS ((SHENZHOU_LED1) << OFF_SETBITS_SHIFT) -#define LED_HEAPALLOCATE_OFF_CLRBITS ((SHENZHOU_LED2|SHENZHOU_LED3|SHENZHOU_LED4) << OFF_CLRBITS_SHIFT) - -#define LED_IRQSENABLED_ON_SETBITS ((SHENZHOU_LED1|SHENZHOU_LED2) << ON_SETBITS_SHIFT) -#define LED_IRQSENABLED_ON_CLRBITS ((SHENZHOU_LED3|SHENZHOU_LED4) << ON_CLRBITS_SHIFT) -#define LED_IRQSENABLED_OFF_SETBITS ((SHENZHOU_LED2) << OFF_SETBITS_SHIFT) -#define LED_IRQSENABLED_OFF_CLRBITS ((SHENZHOU_LED1|SHENZHOU_LED3|SHENZHOU_LED4) << OFF_CLRBITS_SHIFT) - -#define LED_STACKCREATED_ON_SETBITS ((SHENZHOU_LED3) << ON_SETBITS_SHIFT) -#define LED_STACKCREATED_ON_CLRBITS ((SHENZHOU_LED1|SHENZHOU_LED2|SHENZHOU_LED4) << ON_CLRBITS_SHIFT) -#define LED_STACKCREATED_OFF_SETBITS ((SHENZHOU_LED1|SHENZHOU_LED2) << OFF_SETBITS_SHIFT) -#define LED_STACKCREATED_OFF_CLRBITS ((SHENZHOU_LED3|SHENZHOU_LED4) << OFF_CLRBITS_SHIFT) - -#define LED_INIRQ_ON_SETBITS ((SHENZHOU_LED1) << ON_SETBITS_SHIFT) -#define LED_INIRQ_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_INIRQ_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_INIRQ_OFF_CLRBITS ((SHENZHOU_LED1) << OFF_CLRBITS_SHIFT) - -#define LED_SIGNAL_ON_SETBITS ((SHENZHOU_LED2) << ON_SETBITS_SHIFT) -#define LED_SIGNAL_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_SIGNAL_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_SIGNAL_OFF_CLRBITS ((SHENZHOU_LED2) << OFF_CLRBITS_SHIFT) - -#define LED_ASSERTION_ON_SETBITS ((SHENZHOU_LED4) << ON_SETBITS_SHIFT) -#define LED_ASSERTION_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_ASSERTION_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_ASSERTION_OFF_CLRBITS ((SHENZHOU_LED4) << OFF_CLRBITS_SHIFT) - -#define LED_PANIC_ON_SETBITS ((SHENZHOU_LED4) << ON_SETBITS_SHIFT) -#define LED_PANIC_ON_CLRBITS ((0) << ON_CLRBITS_SHIFT) -#define LED_PANIC_OFF_SETBITS ((0) << OFF_SETBITS_SHIFT) -#define LED_PANIC_OFF_CLRBITS ((SHENZHOU_LED4) << OFF_CLRBITS_SHIFT) - -/************************************************************************************** - * Private Function Protototypes - **************************************************************************************/ - -/* LED State Controls */ - -static inline void led_clrbits(unsigned int clrbits); -static inline void led_setbits(unsigned int setbits); -static void led_setonoff(unsigned int bits); - -/* LED Power Management */ - -#ifdef CONFIG_PM -static void led_pm_notify(struct pm_callback_s *cb, enum pm_state_e pmstate); -static int led_pm_prepare(struct pm_callback_s *cb, enum pm_state_e pmstate); -#endif - -/**************************************************************************** - * Private Data - ****************************************************************************/ - -static const uint16_t g_ledbits[8] = -{ - (LED_STARTED_ON_SETBITS | LED_STARTED_ON_CLRBITS | - LED_STARTED_OFF_SETBITS | LED_STARTED_OFF_CLRBITS), - - (LED_HEAPALLOCATE_ON_SETBITS | LED_HEAPALLOCATE_ON_CLRBITS | - LED_HEAPALLOCATE_OFF_SETBITS | LED_HEAPALLOCATE_OFF_CLRBITS), - - (LED_IRQSENABLED_ON_SETBITS | LED_IRQSENABLED_ON_CLRBITS | - LED_IRQSENABLED_OFF_SETBITS | LED_IRQSENABLED_OFF_CLRBITS), - - (LED_STACKCREATED_ON_SETBITS | LED_STACKCREATED_ON_CLRBITS | - LED_STACKCREATED_OFF_SETBITS | LED_STACKCREATED_OFF_CLRBITS), - - (LED_INIRQ_ON_SETBITS | LED_INIRQ_ON_CLRBITS | - LED_INIRQ_OFF_SETBITS | LED_INIRQ_OFF_CLRBITS), - - (LED_SIGNAL_ON_SETBITS | LED_SIGNAL_ON_CLRBITS | - LED_SIGNAL_OFF_SETBITS | LED_SIGNAL_OFF_CLRBITS), - - (LED_ASSERTION_ON_SETBITS | LED_ASSERTION_ON_CLRBITS | - LED_ASSERTION_OFF_SETBITS | LED_ASSERTION_OFF_CLRBITS), - - (LED_PANIC_ON_SETBITS | LED_PANIC_ON_CLRBITS | - LED_PANIC_OFF_SETBITS | LED_PANIC_OFF_CLRBITS) -}; - -#ifdef CONFIG_PM -static struct pm_callback_s g_ledscb = -{ - .notify = led_pm_notify, - .prepare = led_pm_prepare, -}; -#endif - -/**************************************************************************** - * Private Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: led_clrbits - * - * Description: - * Clear all LEDs to the bit encoded state - * - ****************************************************************************/ - -static inline void led_clrbits(unsigned int clrbits) -{ - if ((clrbits & SHENZHOU_LED1) != 0) - { - stm32_gpiowrite(GPIO_LED1, false); - } - - if ((clrbits & SHENZHOU_LED2) != 0) - { - stm32_gpiowrite(GPIO_LED2, false); - } - - if ((clrbits & SHENZHOU_LED3) != 0) - { - stm32_gpiowrite(GPIO_LED3, false); - } - - if ((clrbits & SHENZHOU_LED4) != 0) - { - stm32_gpiowrite(GPIO_LED4, false); - } -} - -/**************************************************************************** - * Name: led_setbits - * - * Description: - * Set all LEDs to the bit encoded state - * - ****************************************************************************/ - -static inline void led_setbits(unsigned int setbits) -{ - if ((setbits & SHENZHOU_LED1) != 0) - { - stm32_gpiowrite(GPIO_LED1, true); - } - - if ((setbits & SHENZHOU_LED2) != 0) - { - stm32_gpiowrite(GPIO_LED2, true); - } - - if ((setbits & SHENZHOU_LED3) != 0) - { - stm32_gpiowrite(GPIO_LED3, true); - } - - if ((setbits & SHENZHOU_LED4) != 0) - { - stm32_gpiowrite(GPIO_LED4, true); - } -} - -/**************************************************************************** - * Name: led_setonoff - * - * Description: - * Set/clear all LEDs to the bit encoded state - * - ****************************************************************************/ - -static void led_setonoff(unsigned int bits) -{ - led_clrbits(CLRBITS(bits)); - led_setbits(SETBITS(bits)); -} - -/**************************************************************************** - * Name: led_pm_notify - * - * Description: - * Notify the driver of new power state. This callback is called after - * all drivers have had the opportunity to prepare for the new power state. - * - ****************************************************************************/ - -#ifdef CONFIG_PM -static void led_pm_notify(struct pm_callback_s *cb , enum pm_state_e pmstate) -{ - switch (pmstate) - { - case(PM_NORMAL): - { - /* Restore normal LEDs operation */ - - } - break; - - case(PM_IDLE): - { - /* Entering IDLE mode - Turn leds off */ - - } - break; - - case(PM_STANDBY): - { - /* Entering STANDBY mode - Logic for PM_STANDBY goes here */ - - } - break; - - case(PM_SLEEP): - { - /* Entering SLEEP mode - Logic for PM_SLEEP goes here */ - - } - break; - - default: - { - /* Should not get here */ - - } - break; - } -} -#endif - -/**************************************************************************** - * Name: led_pm_prepare - * - * Description: - * Request the driver to prepare for a new power state. This is a warning - * that the system is about to enter into a new power state. The driver - * should begin whatever operations that may be required to enter power - * state. The driver may abort the state change mode by returning a - * non-zero value from the callback function. - * - ****************************************************************************/ - -#ifdef CONFIG_PM -static int led_pm_prepare(struct pm_callback_s *cb , enum pm_state_e pmstate) -{ - /* No preparation to change power modes is required by the LEDs driver. - * We always accept the state change by returning OK. - */ - - return OK; -} -#endif - -/**************************************************************************** - * Public Functions - ****************************************************************************/ - -/**************************************************************************** - * Name: up_ledinit - ****************************************************************************/ - -#ifdef CONFIG_ARCH_LEDS -void up_ledinit(void) -{ - /* Configure LED1-4 GPIOs for output */ - - stm32_configgpio(GPIO_LED1); - stm32_configgpio(GPIO_LED2); - stm32_configgpio(GPIO_LED3); - stm32_configgpio(GPIO_LED4); -} - -/**************************************************************************** - * Name: up_ledon - ****************************************************************************/ - -void up_ledon(int led) -{ - led_setonoff(ON_BITS(g_ledbits[led])); -} - -/**************************************************************************** - * Name: up_ledoff - ****************************************************************************/ - -void up_ledoff(int led) -{ - led_setonoff(OFF_BITS(g_ledbits[led])); -} - -/**************************************************************************** - * Name: up_ledpminitialize - ****************************************************************************/ - -#ifdef CONFIG_PM -void up_ledpminitialize(void) -{ - /* Register to receive power management callbacks */ - - int ret = pm_register(&g_ledscb); - if (ret != OK) - { - up_ledon(LED_ASSERTION); - } -} -#endif /* CONFIG_PM */ - -#endif /* CONFIG_ARCH_LEDS */ diff --git a/configs/skp16c26/Kconfig b/configs/skp16c26/Kconfig index 377c251b34..7a1044c5e1 100644 --- a/configs/skp16c26/Kconfig +++ b/configs/skp16c26/Kconfig @@ -4,16 +4,4 @@ # if ARCH_BOARD_SKP16C26 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - endif diff --git a/configs/stm3210e-eval/Kconfig b/configs/stm3210e-eval/Kconfig index 1af4dcd35a..95ad5f1084 100644 --- a/configs/stm3210e-eval/Kconfig +++ b/configs/stm3210e-eval/Kconfig @@ -6,25 +6,6 @@ if ARCH_BOARD_STM3210E_EVAL comment "STM3210E-EVAL LCD Hardware Configuration" -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support EXTI interrupts on button presses and releases." - config STM3210E_LCD bool "Select support for the STM3210E-EVAL LCD" default y diff --git a/configs/stm3220g-eval/Kconfig b/configs/stm3220g-eval/Kconfig index 3f4ef350c4..33e172cfce 100644 --- a/configs/stm3220g-eval/Kconfig +++ b/configs/stm3220g-eval/Kconfig @@ -4,24 +4,6 @@ # if ARCH_BOARD_STM3220G_EVAL -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support EXTI interrupts on button presses and releases." config STM3220G_LCD bool "Select support for the STM3210E-EVAL LCD" diff --git a/configs/stm3240g-eval/Kconfig b/configs/stm3240g-eval/Kconfig index 9c56a5381b..ae73d21e43 100644 --- a/configs/stm3240g-eval/Kconfig +++ b/configs/stm3240g-eval/Kconfig @@ -4,24 +4,6 @@ # if ARCH_BOARD_STM3240G_EVAL -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support EXTI interrupts on button presses and releases." config STM3240G_LCD bool "Select support for the STM3210E-EVAL LCD" diff --git a/configs/stm32f4discovery/Kconfig b/configs/stm32f4discovery/Kconfig index 2843352b44..af94245c4c 100644 --- a/configs/stm32f4discovery/Kconfig +++ b/configs/stm32f4discovery/Kconfig @@ -4,24 +4,6 @@ # if ARCH_BOARD_STM32F4_DISCOVERY -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support EXTI interrupts on button presses and releases." config PM_BUTTONS bool "PM Button support" diff --git a/configs/sure-pic32mx/Kconfig b/configs/sure-pic32mx/Kconfig index fd2a5e2597..03753893d3 100644 --- a/configs/sure-pic32mx/Kconfig +++ b/configs/sure-pic32mx/Kconfig @@ -4,23 +4,4 @@ # if ARCH_BOARD_SUREPIC32MX -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support interrupts on button presses and releases." - endif diff --git a/configs/twr-k60n512/Kconfig b/configs/twr-k60n512/Kconfig index e0a0ce5750..94e6b725a4 100644 --- a/configs/twr-k60n512/Kconfig +++ b/configs/twr-k60n512/Kconfig @@ -4,23 +4,4 @@ # if ARCH_BOARD_TWR_K60N512 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support interrupts on button presses and releases." - endif diff --git a/configs/ubw32/Kconfig b/configs/ubw32/Kconfig index c0213392c2..83ed53225b 100644 --- a/configs/ubw32/Kconfig +++ b/configs/ubw32/Kconfig @@ -4,23 +4,4 @@ # if ARCH_BOARD_UBW32 -config ARCH_LEDS - bool "NuttX LED support" - default n - ---help--- - "Support control of board LEDs by NuttX to indicate system state" - -config ARCH_BUTTONS - bool "Button support" - default n - ---help--- - "Support interfaces to use buttons provided by the board." - -config ARCH_IRQBUTTONS - bool "Button interrupt support" - default n - depends on ARCH_BUTTONS - ---help--- - "Support interrupts on button presses and releases." - endif