diff --git a/ChangeLog b/ChangeLog index 7507fd3e36..8fa2df4407 100644 --- a/ChangeLog +++ b/ChangeLog @@ -4930,3 +4930,9 @@ * arm/src/sam34/chip/sam3u_periphclks.h: More macros and definitions to generalize peripheral clocking and to hide differences between the SAM3U and the SAM4L (2013-6-8). + * configs/sam4l-xplained/ostest: The SAM4L now passed the OS test + (2013-6-9). + * configs/sam4l-xplained/nsh: Added an NSH configuration for the + SAM4L Xplained Pro board (2013-6-9). + * configs/sam4l-xplained/src/sam_cxxinitialize.c: Added C++ support + to the SAM4L Xplained Pro board configuration (2013-6-9). \ No newline at end of file diff --git a/arch/arm/src/sam34/sam4l_clockconfig.c b/arch/arm/src/sam34/sam4l_clockconfig.c index 1b373b8918..59bd62bf09 100644 --- a/arch/arm/src/sam34/sam4l_clockconfig.c +++ b/arch/arm/src/sam34/sam4l_clockconfig.c @@ -1283,7 +1283,8 @@ void sam_clockconfig(void) #else /* Power scaling mode 0, disable high speed mode, no fast wakeup */ - psm = BPM_PMCON_PS0; + psm = BPM_PMCON_PS0; + fastwkup = false; #endif /* Enable clock sources: diff --git a/configs/sam4l-xplained/README.txt b/configs/sam4l-xplained/README.txt index 69a501fc42..c4c12fde69 100644 --- a/configs/sam4l-xplained/README.txt +++ b/configs/sam4l-xplained/README.txt @@ -452,7 +452,7 @@ The that is provided above as an argument to the tools/configure.sh must be is one of the following: ostest: - This configuration directory, performs a simple OS test using + This configuration directory performs a simple OS test using examples/ostest. NOTES: @@ -476,3 +476,36 @@ must be is one of the following: CONFIG_USART0_PARITY=0 CONFIG_USART0_RXBUFSIZE=256 CONFIG_USART0_TXBUFSIZE=256 + + 2. This configuration is set up to use the NuttX OABI toolchain (see + above). Of course this can be reconfigured if you prefer a different + toolchain. + + nsh: + This configuration directory will built the NuttShell. + + NOTES: + + 1. This configuration provides test output on USART0 which is available + on EXT1 or EXT4 (see the section "Serial Consoles" above). The + virtual COM port could be used, instead, by reconfiguring to use + USART1 instead of USART0: + + System Type -> AT91SAM3/4 Peripheral Support + CONFIG_SAM_USART0=y + CONFIG_SAM_USART1=n + + Device Drivers -> Serial Driver Support -> Serial Console + CONFIG_USART0_SERIAL_CONSOLE=y + + Device Drivers -> Serial Driver Support -> USART0 Configuration + CONFIG_USART0_2STOP=0 + CONFIG_USART0_BAUD=115200 + CONFIG_USART0_BITS=8 + CONFIG_USART0_PARITY=0 + CONFIG_USART0_RXBUFSIZE=256 + CONFIG_USART0_TXBUFSIZE=256 + + 2. This configuration is set up to use the NuttX OABI toolchain (see + above). Of course this can be reconfigured if you prefer a different + toolchain. diff --git a/configs/sam4l-xplained/nsh/Make.defs b/configs/sam4l-xplained/nsh/Make.defs new file mode 100644 index 0000000000..25cdee290d --- /dev/null +++ b/configs/sam4l-xplained/nsh/Make.defs @@ -0,0 +1,109 @@ +############################################################################ +# configs/sam4l-xplained/nsh/Make.defs +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" + MAXOPTIMIZATION = -O2 +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +else + ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = + diff --git a/configs/sam4l-xplained/nsh/defconfig b/configs/sam4l-xplained/nsh/defconfig new file mode 100644 index 0000000000..86e9b79447 --- /dev/null +++ b/configs/sam4l-xplained/nsh/defconfig @@ -0,0 +1,693 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# +CONFIG_NUTTX_NEWCONFIG=y + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y + +# +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +CONFIG_ARCH_CHIP_SAM34=y +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM4=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="sam34" +# CONFIG_ARMV7M_USEBASEPRI is not set +# CONFIG_ARCH_HAVE_FPU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set + +# +# ARMV7M Configuration Options +# +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +CONFIG_ARMV7M_OABI_TOOLCHAIN=y + +# +# AT91SAM3/4 Configuration Options +# +# CONFIG_ARCH_CHIP_AT91SAM3U4E is not set +# CONFIG_ARCH_CHIP_SAM34_NDMACHANC2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC2A is not set +CONFIG_ARCH_CHIP_ATSAM4LC4C=y +# CONFIG_ARCH_CHIP_ATSAM4LC4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LC4A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS2A is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4C is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4B is not set +# CONFIG_ARCH_CHIP_ATSAM4LS4A is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD32C is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD32B is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD16C is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SD16B is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SA16C is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4SA16B is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S16C is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S16B is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S8C is not set +# CONFIG_CONFIG_ARCH_CHIP_ATSAM4S8B is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +CONFIG_ARCH_CHIP_SAM4L=y +# CONFIG_ARCH_CHIP_SAM4S is not set + +# +# AT91SAM3/4 Peripheral Support +# +CONFIG_SAM_PICOCACHE=y +# CONFIG_SAM34_OCD is not set +# CONFIG_SAM34_APBA is not set +# CONFIG_SAM34_AESA is not set +# CONFIG_SAM34_IISC is not set +# CONFIG_SAM34_SPI is not set +# CONFIG_SAM34_TC0 is not set +# CONFIG_SAM34_TC1 is not set +# CONFIG_SAM34_TWIM0 is not set +# CONFIG_SAM34_TWIS0 is not set +# CONFIG_SAM34_TWIM1 is not set +# CONFIG_SAM34_TWIS1 is not set +# CONFIG_SAM34_TWIM2 is not set +# CONFIG_SAM34_TWIM3 is not set +# CONFIG_SAM34_PICOUART is not set +CONFIG_SAM34_USART0=y +# CONFIG_SAM34_USART1 is not set +# CONFIG_SAM34_USART2 is not set +# CONFIG_SAM34_USART3 is not set +# CONFIG_SAM34_ADCIFE is not set +# CONFIG_SAM34_DACC is not set +# CONFIG_SAM34_ACIFC is not set +# CONFIG_SAM34_GLOC is not set +# CONFIG_SAM34_ABDACB is not set +# CONFIG_SAM34_TRNG is not set +# CONFIG_SAM34_PARC is not set +# CONFIG_SAM34_CATB is not set +# CONFIG_SAM34_LCDCA is not set +# CONFIG_SAM34_HRAMC1 is not set +# CONFIG_SAM34_HMATRIX is not set +# CONFIG_SAM34_PDCA is not set +# CONFIG_SAM34_CRCCU is not set +# CONFIG_SAM34_USBC is not set +# CONFIG_SAM34_PEVC is not set +# CONFIG_SAM34_CHIPID is not set +# CONFIG_SAM34_FREQM is not set +# CONFIG_SAM34_AST is not set +# CONFIG_SAM34_WDT is not set +# CONFIG_SAM34_EIC is not set +# CONFIG_SAM32_RESET_PERIPHCLKS is not set + +# +# AT91SAM3/4 USART Configuration +# +CONFIG_USART0_ISUART=y + +# +# AT91SAM3/4 GPIO Interrupt Configuration +# +# CONFIG_GPIOA_IRQ is not set +# CONFIG_GPIOB_IRQ is not set +# CONFIG_GPIOC_IRQ is not set + +# +# External Memory Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +CONFIG_ARCH_RAMFUNCS=y +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=4768 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x20000000 +CONFIG_DRAM_SIZE=32768 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_SAM4L_XPLAINED=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sam4l-xplained" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +# CONFIG_ARCH_IRQBUTTONS is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_INSTRUMENTATION is not set +CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2013 +CONFIG_START_MONTH=6 +CONFIG_START_DAY=9 +CONFIG_DEV_CONSOLE=y +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +CONFIG_DISABLE_ENVIRON=y + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# Sizes of configurable things (0 disables) +# +CONFIG_MAX_TASKS=16 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_NPTHREAD_KEYS=4 +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=1536 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=1536 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_USART0=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_USART0_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART0 Configuration +# +CONFIG_USART0_RXBUFSIZE=256 +CONFIG_USART0_TXBUFSIZE=256 +CONFIG_USART0_BAUD=115200 +CONFIG_USART0_BITS=8 +CONFIG_USART0_PARITY=0 +CONFIG_USART0_2STOP=0 +# CONFIG_USART0_IFLOWCONTROL is not set +# CONFIG_USART0_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=3 +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=1536 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +CONFIG_CXX_NEWLONG=y + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKFATFS is not set +# CONFIG_NSH_DISABLE_MKFIFO is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_NSFMOUNT is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PING is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_CONSOLE=y + +# +# USB Trace Support +# +# CONFIG_NSH_CONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# diff --git a/configs/sam4l-xplained/nsh/setenv.sh b/configs/sam4l-xplained/nsh/setenv.sh new file mode 100755 index 0000000000..f83126fdf3 --- /dev/null +++ b/configs/sam4l-xplained/nsh/setenv.sh @@ -0,0 +1,63 @@ +#!/bin/bash +# configs/sam4l-xplained/nsh/setenv.sh +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/configs/sam4l-xplained/scripts/ld.script b/configs/sam4l-xplained/scripts/ld.script index 83cea01e03..e908e7a3ee 100755 --- a/configs/sam4l-xplained/scripts/ld.script +++ b/configs/sam4l-xplained/scripts/ld.script @@ -63,6 +63,22 @@ SECTIONS _etext = ABSOLUTE(.); } > flash + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } >flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } >flash + __exidx_end = ABSOLUTE(.); + .data : { _sdata = ABSOLUTE(.); *(.data .data.*) @@ -81,16 +97,6 @@ SECTIONS _framfuncs = LOADADDR(.ramfunc); - .ARM.extab : { - *(.ARM.extab*) - } >sram - - .ARM.exidx : { - __exidx_start = ABSOLUTE(.); - *(.ARM.exidx*) - __exidx_end = ABSOLUTE(.); - } >sram - .bss : { _sbss = ABSOLUTE(.); *(.bss .bss.*) diff --git a/configs/sam4l-xplained/src/Makefile b/configs/sam4l-xplained/src/Makefile index 15b5ff67ef..01813faf4c 100644 --- a/configs/sam4l-xplained/src/Makefile +++ b/configs/sam4l-xplained/src/Makefile @@ -42,6 +42,10 @@ AOBJS = $(ASRCS:.S=$(OBJEXT)) CSRCS = sam_boot.c sam_spi.c +ifeq ($(CONFIG_HAVE_CXX),y) +CSRCS += sam_cxxinitialize.c +endif + ifeq ($(CONFIG_ARCH_LEDS),y) CSRCS += sam_autoleds.c else diff --git a/configs/sam4l-xplained/src/sam_cxxinitialize.c b/configs/sam4l-xplained/src/sam_cxxinitialize.c new file mode 100644 index 0000000000..fdbce87fd2 --- /dev/null +++ b/configs/sam4l-xplained/src/sam_cxxinitialize.c @@ -0,0 +1,154 @@ +/************************************************************************************ + * configs/stm32f4discovery/src/sam_cxxinitialize.c + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include + +#include + +#include +#include "chip.h" + +#if defined(CONFIG_HAVE_CXX) && defined(CONFIG_HAVE_CXXINITIALIZE) + +/************************************************************************************ + * Definitions + ************************************************************************************/ +/* Debug ****************************************************************************/ +/* Non-standard debug that may be enabled just for testing the static constructors */ + +#ifndef CONFIG_DEBUG +# undef CONFIG_DEBUG_CXX +#endif + +#ifdef CONFIG_DEBUG_CXX +# define cxxdbg dbg +# define cxxlldbg lldbg +# ifdef CONFIG_DEBUG_VERBOSE +# define cxxvdbg vdbg +# define cxxllvdbg llvdbg +# else +# define cxxvdbg(x...) +# define cxxllvdbg(x...) +# endif +#else +# define cxxdbg(x...) +# define cxxlldbg(x...) +# define cxxvdbg(x...) +# define cxxllvdbg(x...) +#endif + +/************************************************************************************ + * Private Types + ************************************************************************************/ +/* This type defines one entry in initialization array */ + +typedef void (*initializer_t)(void); + +/************************************************************************************ + * External references + ************************************************************************************/ +/* _sinit and _einit are symbols exported by the linker script that mark the + * beginning and the end of the C++ initialization section. + */ + +extern initializer_t _sinit; +extern initializer_t _einit; + +/* _stext and _etext are symbols exported by the linker script that mark the + * beginning and the end of text. + */ + +extern uint32_t _stext; +extern uint32_t _etext; + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/**************************************************************************** + * Name: up_cxxinitialize + * + * Description: + * If C++ and C++ static constructors are supported, then this function + * must be provided by board-specific logic in order to perform + * initialization of the static C++ class instances. + * + * This function should then be called in the application-specific + * user_start logic in order to perform the C++ initialization. NOTE + * that no component of the core NuttX RTOS logic is involved; This + * function defintion only provides the 'contract' between application + * specific C++ code and platform-specific toolchain support + * + ***************************************************************************/ + +void up_cxxinitialize(void) +{ + initializer_t *initp; + + cxxdbg("_sinit: %p _einit: %p _stext: %p _etext: %p\n", + &_sinit, &_einit, &_stext, &_etext); + + /* Visit each entry in the initialzation table */ + + for (initp = &_sinit; initp != &_einit; initp++) + { + initializer_t initializer = *initp; + cxxdbg("initp: %p initializer: %p\n", initp, initializer); + + /* Make sure that the address is non-NULL and lies in the text region + * defined by the linker script. Some toolchains may put NULL values + * or counts in the initialization table + */ + + if ((void*)initializer > (void*)&_stext && (void*)initializer < (void*)&_etext) + { + cxxdbg("Calling %p\n", initializer); + initializer(); + } + } +} + +#endif /* CONFIG_HAVE_CXX && CONFIG_HAVE_CXXINITIALIZE */ +