sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAMA5D4-EK: Add bootloader that runs from ISRAM and loads an Intel HEX file into DRAM

Browse Source
This commit is contained in:
Gregory Nutt 2014-06-26 16:42:06 -06:00
parent 3a1a8da19c
commit 3fb8023bdf
8 changed files with 1421 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
configs/sama5d3x-ek/Kconfig
View File

@ -64,7 +64,7 @@ config SAMA5D3xEK_NOR_START
---help---
The default behavior of the NOR boot program is to initialize the
NOR FLASH at CS0, then patiently wait for you to break into the
program with GDB. An alternative behvior is enabled with this
program with GDB. An alternative behavior is enabled with this
option: If SAMA5D3xEK_NOR_START is defined, then it will not wait but
will, instead, immediately start the program in NOR FLASH.

36
configs/sama5d4-ek/Kconfig
View File

@ -37,6 +37,42 @@ config SAMA5D4EK_MT47H64M16HR
endchoice # SAMA4D4-EK DRAM Type
config SAMA5D4EK_DRAM_MAIN
bool "Build dram_main"
default n
depends on SAMA5_BOOT_ISRAM
---help---
dram_main is a tiny program that runs in ISRAM. dram_main will
enable SDRAM and load an Intel HEX program into SDRAM over the
serial console. Then it will either (1) jump to the program in
DRAM at address 0x2000:0000 (2) wait for you to break in with GDB to
debug the SDRAM program. These different behaviors are controlled
by SAMA5D4EK_DRAM_START.
NOTE: If you use this boot loader, then your program must be built at
origin 0x2000:0000, not at 0x2100:0000 as is customary with U-Boot.
config SAMA5D4EK_DRAM_START
bool "Start DRAM program"
default n
depends on SAMA5D4EK_DRAM_MAIN
---help---
The default behavior of the DRAM boot program is to initialize the
DRAM, then patiently wait for you to break into the program with GDB.
An alternative behavior is enabled with this option: If
SAMA5D4EK_DRAM_START is defined, then it will not wait but will,
instead, immediately start the program in DRAM.
config SAMA5D4EK_DRAM_BOOT
bool "Using DRAM boot loader"
default y
depends on SAMA5_BOOT_SDRAM && !SAMA5D4EK_DRAM_MAIN
---help---
Select this option if you are going to boot using the sdram_main
bootloader (created with SAMA5D4EK_DRAM_MAIN=y). This selection
will simply origin your program at 0x2000:0000 as required by the
sdram_main bootloader (vs. 0x2100:0000 as required by U-Boot).
config SAMA5D4EK_NAND_AUTOMOUNT
bool "NAND FLASH auto-mount"
default n

192
configs/sama5d4-ek/README.txt
View File

@ -62,6 +62,7 @@ Contents
- NXFLAT Toolchain
- Loading Code into SRAM with J-Link
- Writing to FLASH using SAM-BA
- Creating and Using DRAMBOOT
- Running NuttX from SDRAM
- PIO Usage
- Buttons and LEDs
@ -328,14 +329,108 @@ Writing to FLASH using SAM-BA
re-open the terminal emulator program.
10. Power cycle the board.
Creating and Using DRAMBOOT
===========================
In order to have more control of debugging code that runs out of DARM,
I created the sama5d4-ek/dramboot configuration. That configuration is
described below under "Configurations."
Here are some general instructions on how to build an use dramboot:
Building:
1. Remove any old configurations (if applicable).
cd <nuttx>
make distclean
2. Install and build the dramboot configuration. This steps will establish
the dramboot configuration and setup the PATH variable in order to do
the build:
cd tools
./configure.sh sama5d4-ek/dramboot
cd -
. ./setenv.sh
Before sourcing the setenv.sh file above, you should examine it and
perform edits as necessary so that TOOLCHAIN_BIN is the correct path
to the directory than holds your toolchain binaries.
NOTE: Be aware that the default dramboot also disables the watchdog.
Since you will not be able to re-enable the watchdog later, you may
need to set CONFIG_SAMA5_WDT=y in the NuttX configuration file.
Then make dramboot:
make
This will result in an ELF binary called 'nuttx' and also HEX and
binary versions called 'nuttx.hex' and 'nuttx.bin'.
3. Rename the binaries. Since you will need two versions of NuttX: this
dramboot version that runs in internal SRAM and another under test in
NOR FLASH, I rename the resulting binary files so that they can be
distinguished:
mv nuttx dramboot
mv nuttx.hex dramboot.hex
mv nuttx.bin dramboot.bin
4. Build the "real" DRAM configuration. This will create the nuttx.hex
that you will load using dramboot.
5. Restart the system holding DIS_BOOT. You should see the RamBOOT
prompt on the 115200 8N1 serial console (and nothing) more. Hit
the ENTER key with the focus on your terminal window a few time.
This will enable JTAG.
6. Then start the J-Link GDB server and GDB. In GDB, I do the following:
(gdb) mon heal # Halt the CPU
(gdb) load dramboot # Load dramboot into internal SRAM
(gdb) mon go # Start dramboot
You should see this message:
Send Intel HEX file now
Load your program by sending the nuttx.hex via the terminal program.
Then:
(gdb) mon halt # Break in
(gdb) mon reg pc = 0x20000040 # Set the PC to DRAM entry point
(gdb) mon go # And jump into DRAM
The dramboot program can also be configured to jump directly into
DRAM without requiring the final halt and go by setting
CONFIG_SAMA5D4EK_DRAM_START=y in the NuttX configuration. However,
since I have been debugging the early boot sequence, the above
sequence has been most convenient for me since it allows me to
step into the program in SDRAM.
7. An option is to use the SAM-BA tool to write the DRAMBOOT image into
Serial FLASH. Then, the system will boot from Serial FLASH by
copying the DRAMBOOT image in SRAM which will run, download the nuttx.hex
file, and then start the image loaded into DRAM automatically. This is
a very convenient usage!
NOTES: (1) There is that must be closed to enable use of the AT25
Serial Flash. (2) If using SAM-BA, make sure that you load the DRAM
boot program into the boot area via the pull-down menu.
Running NuttX from SDRAM
========================
NuttX may be executed from SDRAM. But this case means that the NuttX
binary must reside on some other media (typically NAND FLASH, Serial
FLASH, or, perhaps even a TFTP server). In these cases, an intermediate
bootloader such as U-Boot or Barebox must be used to configure the
SAMA5D4 clocks and SDRAM and then to copy the NuttX binary into SDRAM.
FLASH) or transferred over some interface (perhaps a UARt or even a
TFTP server). In these cases, an intermediate bootloader such as U-Boot
or Barebox must be used to configure the SAMA5D4 clocks and SDRAM and
then to copy the NuttX binary into SDRAM.
The SRAMBOOT program is another option (see above). But this section
will focus on U-Boot.
- NuttX Configuration
- Boot sequence
@ -2420,6 +2515,10 @@ Watchdog Timer
the WDT, we cannot disable the watchdog time if CONFIG_SAMA5_WDT=y. So,
be forewarned: You have only 16 seconds to run your watchdog timer test!
NOTE: If you are using the dramboot program to run from DRAM as I did,
beware that the default version also disables the watchdog. You will
need a special version of dramboot with CONFIG_SAMA5_WDT=y.
TRNG and /dev/random
====================
@ -2809,6 +2908,9 @@ Configurations
Summary: Some of the descriptions below are long and wordy. Here is the
concise summary of the available SAMA4D4-EK configurations:
dramboot: This is a little program to help debug of code in DRAM. See
the description below and the section above entitled "Creating and
Using DRAMBOOT" for more information
nsh: This is another NSH configuration, not too different from the
demo configuration. The nsh configuration is, however, bare bones.
It is the simplest possible NSH configuration and is useful as a
@ -2823,6 +2925,86 @@ Configurations
Now for the gory details:
dramboot:
This is a little program to help debug of code in DRAM. It does the
following:
- It configures DRAM,
- It loads and Intel HEX file into DRAM over the terminal port,
- Waits for you to break in with GDB.
At that point, you can set the PC and begin executing from SDRAM under
debug control. See the section entitled "Creating and Using
DRAMBOOT" above.
NOTES:
1. This configuration uses the the USART3 for the serial console
which is available at the "DBGU" RS-232 connector (J24). That
is easily changed by reconfiguring to (1) enable a different
serial peripheral, and (2) selecting that serial peripheral as
the console device.
2. By default, this configuration is set up to build on Windows
under either a Cygwin or MSYS environment using a recent, Windows-
native, generic ARM EABI GCC toolchain (such as the CodeSourcery
toolchain). Both the build environment and the toolchain
selection can easily be changed by reconfiguring:
CONFIG_HOST_WINDOWS=y : Windows operating system
CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
If you are running on Linux, make *certain* that you have
CONFIG_HOST_LINUX=y *before* the first make or you will create a
corrupt configuration that may not be easy to recover from. See
the warning in the section "Information Common to All Configurations"
for further information.
3. This configuration executes out of internal SRAM flash and is
loaded into SRAM by the boot RomBoot from NAND, Serial
DataFlash, SD card or from a TFTPC sever via the Boot ROM.
Data also is positioned in SRAM.
2. The default dramboot program initializes the DRAM memory,
displays a message, loads an Intel HEX program into DRAM over the
serial console and halts. The dramboot program can also be
configured to jump directly into DRAM without requiring the
final halt and go by setting CONFIG_SAMA5D4EK_DRAM_START=y in the
NuttX configuration.
3. Be aware that the default dramboot also disables the watchdog.
Since you will not be able to re-enable the watchdog later, you may
need to set CONFIG_SAMA5_WDT=y in the NuttX configuration file.
4. If you put dramboot on the Serial FLASH, you can automatically
boot to SDRAM on reset. See the section "Creating and Using DRAMBOOT"
above.
5. Here are the steps that I use to execute this program in SRAM
using only the ROM Bootloader:
a) Hold the DIS_BOOT button and
b) With the DIS_BOOT button pressed, power cycle the board. A
reset does not seem to be sufficient.
c) The serial should show RomBOOT in a terminal window (at 115200
8N1) and nothing more.
d) Press ENTER in the terminal window a few times to enable JTAG.
e) Start the Segger GDB server. It should successfully connect to
the board via JTAG (if JTAG was correctly enabled in step d)).
f) Start GDB, connect, to the GDB server, load NuttX, and debug.
gdb> target remote localhost:2331
gdb> mon halt (don't do mon reset)
gdb> load nuttx
gdb> mon reg pc (make sure that the PC is 0x200040
gdb> ... and debug ...
nsh:
This configuration directory provide the NuttShell (NSH). This is a
@ -2830,6 +3012,7 @@ Configurations
functionality.
NOTES:
1. This configuration uses the the USART3 for the serial console
which is available at the "DBGU" RS-232 connector (J24). That
is easily changed by reconfiguring to (1) enable a different
@ -2917,6 +3100,7 @@ Configurations
bringing up SDRAM.
NOTES:
1. This configuration uses the the USART3 for the serial console
which is available at the "DBGU" RS-232 connector (J24). That
is easily changed by reconfiguring to (1) enable a different
@ -2942,7 +3126,7 @@ Configurations
3. This configuration executes out of internal SRAM flash and is
loaded into SRAM by the boot ROM SDRAM from NAND, Serial
DataFlash, SD card or from a TFTPC sever via the Boot ROM.
Data also is positioned in SDRAM.
Data also is positioned in SRAM.
Here are the steps that I use to execute this program in SRAM
using only the ROM Bootloader:

126
configs/sama5d4-ek/dramboot/Make.defs Normal file
View File

@ -0,0 +1,126 @@
############################################################################
# configs/sama5d4-ek/dramboot/Make.defs
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
LDSCRIPT = isram.ld
endif
ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
LDSCRIPT = ddram.ld
endif
ifeq ($(WINTOOL),y)
# Windows-native toolchains
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
else
# Linux/Cygwin-native toolchain
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(ARCROSSDEV)ar rcs
NM = $(ARCROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
endif
ifneq ($(CONFIG_DEBUG_NOOPT),y)
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =
ifeq ($(CONFIG_HOST_WINDOWS),y)
HOSTEXEEXT = .exe
else
HOSTEXEEXT =
endif
ifeq ($(WINTOOL),y)
# Windows-native host tools
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
else
# Linux/Cygwin-native host tools
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
endif

835
configs/sama5d4-ek/dramboot/defconfig Normal file
View File

@ -0,0 +1,835 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
# CONFIG_DEFAULT_SMALL is not set
# CONFIG_HOST_LINUX is not set
# CONFIG_HOST_OSX is not set
CONFIG_HOST_WINDOWS=y
# CONFIG_HOST_OTHER is not set
# CONFIG_WINDOWS_NATIVE is not set
CONFIG_WINDOWS_CYGWIN=y
# CONFIG_WINDOWS_MSYS is not set
# CONFIG_WINDOWS_OTHER is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
# CONFIG_UBOOT_UIMAGE is not set
#
# Customize Header Files
#
# CONFIG_ARCH_STDINT_H is not set
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
CONFIG_ARCH_HAVE_STACKCHECK=y
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
# CONFIG_DEBUG_SYMBOLS is not set
CONFIG_ARCH_HAVE_CUSTOMOPT=y
# CONFIG_DEBUG_NOOPT is not set
# CONFIG_DEBUG_CUSTOMOPT is not set
CONFIG_DEBUG_FULLOPT=y
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_A1X is not set
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_TIVA is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
CONFIG_ARCH_CHIP_SAMA5=y
# CONFIG_ARCH_CHIP_SAMD is not set
# CONFIG_ARCH_CHIP_SAM34 is not set
# CONFIG_ARCH_CHIP_STM32 is not set
# CONFIG_ARCH_CHIP_STR71X is not set
# CONFIG_ARCH_ARM7TDMI is not set
# CONFIG_ARCH_ARM926EJS is not set
# CONFIG_ARCH_ARM920T is not set
# CONFIG_ARCH_CORTEXM0 is not set
# CONFIG_ARCH_CORTEXM3 is not set
# CONFIG_ARCH_CORTEXM4 is not set
CONFIG_ARCH_CORTEXA5=y
# CONFIG_ARCH_CORTEXA8 is not set
CONFIG_ARCH_FAMILY="armv7-a"
CONFIG_ARCH_CHIP="sama5"
CONFIG_ARCH_HAVE_FPU=y
CONFIG_ARCH_FPU=y
# CONFIG_ARCH_HAVE_MPU is not set
CONFIG_ARCH_HAVE_LOWVECTORS=y
CONFIG_ARCH_LOWVECTORS=y
# CONFIG_ARCH_ROMPGTABLE is not set
#
# ARMv7-A Configuration Options
#
# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
# CONFIG_ARMV7A_DECODEFIQ is not set
#
# SAMA5 Configuration Options
#
CONFIG_SAMA5_HAVE_AESB=y
CONFIG_SAMA5_HAVE_ICM=y
CONFIG_SAMA5_HAVE_UART0=y
CONFIG_SAMA5_HAVE_UART1=y
CONFIG_SAMA5_HAVE_USART4=y
# CONFIG_SAMA5_HAVE_CAN0 is not set
# CONFIG_SAMA5_HAVE_CAN1 is not set
# CONFIG_SAMA5_HAVE_DMA is not set
CONFIG_SAMA5_HAVE_DDR32=y
CONFIG_SAMA5_HAVE_XDMA=y
CONFIG_SAMA5_HAVE_L2CC=y
CONFIG_SAMA5_HAVE_LCDC=y
# CONFIG_SAMA5_HAVE_GMAC is not set
# CONFIG_SAMA5_HAVE_EMACA is not set
CONFIG_SAMA5_HAVE_EMACB=y
CONFIG_SAMA5_HAVE_EMAC1=y
# CONFIG_SAMA5_HAVE_HSMCI2 is not set
CONFIG_SAMA5_HAVE_SAIC=y
CONFIG_SAMA5_HAVE_SBM=y
CONFIG_SAMA5_HAVE_SFC=y
CONFIG_SAMA5_HAVE_SPI2=y
CONFIG_SAMA5_HAVE_TC1=y
CONFIG_SAMA5_HAVE_TC2=y
CONFIG_SAMA5_HAVE_TRUSTZONE=y
CONFIG_SAMA5_HAVE_TWI3=y
CONFIG_SAMA5_HAVE_VDEC=y
# CONFIG_ARCH_CHIP_SAMA5D3 is not set
CONFIG_ARCH_CHIP_SAMA5D4=y
# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
# CONFIG_ARCH_CHIP_ATSAMA5D33 is not set
# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
# CONFIG_ARCH_CHIP_ATSAMA5D36 is not set
# CONFIG_ARCH_CHIP_ATSAMA5D41 is not set
# CONFIG_ARCH_CHIP_ATSAMA5D42 is not set
# CONFIG_ARCH_CHIP_ATSAMA5D43 is not set
CONFIG_ARCH_CHIP_ATSAMA5D44=y
#
# SAMA5 Peripheral Support
#
# CONFIG_SAMA5_AES is not set
# CONFIG_SAMA5_TDES is not set
# CONFIG_SAMA5_AESB is not set
# CONFIG_SAMA5_DBGU is not set
# CONFIG_SAMA5_L2CC is not set
# CONFIG_SAMA5_PIT is not set
# CONFIG_SAMA5_WDT is not set
# CONFIG_SAMA5_RTC is not set
# CONFIG_SAMA5_ICM is not set
CONFIG_SAMA5_HSMC=y
# CONFIG_SAMA5_SMD is not set
# CONFIG_SAMA5_SAIC is not set
# CONFIG_SAMA5_UART0 is not set
# CONFIG_SAMA5_UART1 is not set
# CONFIG_SAMA5_USART0 is not set
# CONFIG_SAMA5_USART1 is not set
# CONFIG_SAMA5_USART2 is not set
CONFIG_SAMA5_USART3=y
# CONFIG_SAMA5_USART4 is not set
# CONFIG_SAMA5_TWI0 is not set
# CONFIG_SAMA5_TWI1 is not set
# CONFIG_SAMA5_TWI2 is not set
# CONFIG_SAMA5_TWI3 is not set
# CONFIG_SAMA5_HSMCI0 is not set
# CONFIG_SAMA5_HSMCI1 is not set
# CONFIG_SAMA5_SBM is not set
# CONFIG_SAMA5_SFC is not set
# CONFIG_SAMA5_SPI0 is not set
# CONFIG_SAMA5_SPI1 is not set
# CONFIG_SAMA5_SPI2 is not set
# CONFIG_SAMA5_TC0 is not set
# CONFIG_SAMA5_TC1 is not set
# CONFIG_SAMA5_TC2 is not set
# CONFIG_SAMA5_PWM is not set
# CONFIG_SAMA5_ADC is not set
# CONFIG_SAMA5_XDMAC0 is not set
# CONFIG_SAMA5_XDMAC1 is not set
# CONFIG_SAMA5_UHPHS is not set
# CONFIG_SAMA5_UDPHS is not set
# CONFIG_SAMA5_EMACB is not set
# CONFIG_SAMA5_EMAC0 is not set
# CONFIG_SAMA5_EMAC1 is not set
# CONFIG_SAMA5_LCDC is not set
# CONFIG_SAMA5_ISI is not set
# CONFIG_SAMA5_SHA is not set
# CONFIG_SAMA5_TRNG is not set
# CONFIG_SAMA5_ARM is not set
# CONFIG_SAMA5_FUSE is not set
CONFIG_SAMA5_MPDDRC=y
# CONFIG_SAMA5_VDEC is not set
# CONFIG_SAMA5_PIO_IRQ is not set
#
# External Memory Configuration
#
CONFIG_SAMA5_DDRCS=y
CONFIG_SAMA5_DDRCS_SIZE=268435456
# CONFIG_SAMA5_DDRCS_LPDDR1 is not set
CONFIG_SAMA5_DDRCS_LPDDR2=y
# CONFIG_SAMA5_EBICS0 is not set
# CONFIG_SAMA5_EBICS1 is not set
# CONFIG_SAMA5_EBICS2 is not set
# CONFIG_SAMA5_EBICS3 is not set
# CONFIG_SAMA5_HAVE_NAND is not set
# CONFIG_SAMA5_HAVE_PMECC is not set
CONFIG_SAMA5_BOOT_ISRAM=y
# CONFIG_SAMA5_BOOT_SDRAM is not set
#
# Heap Configuration
#
CONFIG_SAMA5_DDRCS_HEAP=y
CONFIG_SAMA5_DDRCS_HEAP_OFFSET=0
CONFIG_SAMA5_DDRCS_HEAP_SIZE=0
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_HAVE_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_HAVE_MMU=y
CONFIG_ARCH_NAND_HWECC=y
# CONFIG_ARCH_HAVE_EXTCLK is not set
# CONFIG_PAGING is not set
# CONFIG_ARCH_IRQPRIO is not set
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_IDLE_CUSTOM is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=65775
# CONFIG_ARCH_CALIBRATION is not set
#
# Interrupt options
#
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
# CONFIG_BOOT_RUNFROMFLASH is not set
CONFIG_BOOT_RUNFROMISRAM=y
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Boot Memory Configuration
#
CONFIG_RAM_START=0x00200000
CONFIG_RAM_VSTART=0x00200000
CONFIG_RAM_SIZE=114688
CONFIG_ARCH_HAVE_SDRAM=y
# CONFIG_BOOT_SDRAM_DATA is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_SAMA5D4_EK=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="sama5d4-ek"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
# CONFIG_ARCH_BUTTONS is not set
CONFIG_ARCH_HAVE_IRQBUTTONS=y
#
# Board-Specific Options
#
# CONFIG_SAMA5D4EK_384MHZ is not set
# CONFIG_SAMA5D4EK_396MHZ is not set
CONFIG_SAMA5D4EK_528MHZ=y
CONFIG_SAMA5D4EK_MT47H128M16RT=y
# CONFIG_SAMA5D4EK_MT47H64M16HR is not set
CONFIG_SAMA5D4EK_DRAM_MAIN=y
# CONFIG_SAMA5D4EK_DRAM_START is not set
#
# RTOS Features
#
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
CONFIG_DISABLE_ENVIRON=y
#
# Clocks and Timers
#
CONFIG_MSEC_PER_TICK=10
# CONFIG_SYSTEM_TIME64 is not set
# CONFIG_CLOCK_MONOTONIC is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2014
CONFIG_START_MONTH=7
CONFIG_START_DAY=31
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=16
CONFIG_PREALLOC_TIMERS=4
#
# Tasks and Scheduling
#
CONFIG_USER_ENTRYPOINT="dram_main"
CONFIG_RR_INTERVAL=200
CONFIG_TASK_NAME_SIZE=32
CONFIG_MAX_TASK_ARGS=4
CONFIG_MAX_TASKS=16
# CONFIG_SCHED_HAVE_PARENT is not set
CONFIG_SCHED_WAITPID=y
#
# Pthread Options
#
# CONFIG_MUTEX_TYPES is not set
CONFIG_NPTHREAD_KEYS=4
#
# Performance Monitoring
#
# CONFIG_SCHED_CPULOAD is not set
# CONFIG_SCHED_INSTRUMENTATION is not set
#
# Files and I/O
#
CONFIG_DEV_CONSOLE=y
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
# CONFIG_PRIORITY_INHERITANCE is not set
#
# RTOS hooks
#
# CONFIG_BOARD_INITIALIZE is not set
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# POSIX Message Queue Options
#
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
# CONFIG_PWM is not set
# CONFIG_ARCH_HAVE_I2CRESET is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_I2S is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_TIMER is not set
# CONFIG_ANALOG is not set
# CONFIG_AUDIO_DEVICES is not set
# CONFIG_VIDEO_DEVICES is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
# CONFIG_ARCH_HAVE_UART is not set
# CONFIG_ARCH_HAVE_UART0 is not set
# CONFIG_ARCH_HAVE_UART1 is not set
# CONFIG_ARCH_HAVE_UART2 is not set
# CONFIG_ARCH_HAVE_UART3 is not set
# CONFIG_ARCH_HAVE_UART4 is not set
# CONFIG_ARCH_HAVE_UART5 is not set
# CONFIG_ARCH_HAVE_UART6 is not set
# CONFIG_ARCH_HAVE_UART7 is not set
# CONFIG_ARCH_HAVE_UART8 is not set
# CONFIG_ARCH_HAVE_SCI0 is not set
# CONFIG_ARCH_HAVE_SCI1 is not set
# CONFIG_ARCH_HAVE_USART0 is not set
# CONFIG_ARCH_HAVE_USART1 is not set
# CONFIG_ARCH_HAVE_USART2 is not set
CONFIG_ARCH_HAVE_USART3=y
# CONFIG_ARCH_HAVE_USART4 is not set
# CONFIG_ARCH_HAVE_USART5 is not set
# CONFIG_ARCH_HAVE_USART6 is not set
# CONFIG_ARCH_HAVE_USART7 is not set
# CONFIG_ARCH_HAVE_USART8 is not set
#
# USART Configuration
#
CONFIG_USART3_ISUART=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_USART3_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# USART3 Configuration
#
CONFIG_USART3_RXBUFSIZE=256
CONFIG_USART3_TXBUFSIZE=256
CONFIG_USART3_BAUD=115200
CONFIG_USART3_BITS=8
CONFIG_USART3_PARITY=0
CONFIG_USART3_2STOP=0
# CONFIG_USART3_IFLOWCONTROL is not set
# CONFIG_USART3_OFLOWCONTROL is not set
# CONFIG_SERIAL_IFLOWCONTROL is not set
# CONFIG_SERIAL_OFLOWCONTROL is not set
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_ARCH_HAVE_NET is not set
# CONFIG_ARCH_HAVE_PHY is not set
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
CONFIG_FS_READABLE=y
CONFIG_FS_WRITABLE=y
# CONFIG_FS_RAMMAP is not set
CONFIG_FS_FAT=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_MAXFNAME=32
# CONFIG_FS_FATTIME is not set
# CONFIG_FAT_DMAMEMORY is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_SMARTFS is not set
# CONFIG_FS_BINFS is not set
# CONFIG_FS_PROCFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=1
# CONFIG_ARCH_HAVE_HEAP2 is not set
# CONFIG_GRAN is not set
#
# Audio Support
#
# CONFIG_AUDIO is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
CONFIG_SYMTAB_ORDEREDBYNAME=y
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
CONFIG_LIB_RAND_ORDER=1
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
# CONFIG_LIB_SLCDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
CONFIG_HAVE_CXX=y
CONFIG_HAVE_CXXINITIALIZE=y
# CONFIG_CXX_NEWLONG is not set
#
# uClibc++ Standard C++ Library
#
# CONFIG_UCLIBCXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CONFIGDATA is not set
# CONFIG_EXAMPLES_CPUHOG is not set
# CONFIG_EXAMPLES_CXXTEST is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MODBUS is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_NRF24L01TERM is not set
# CONFIG_EXAMPLES_NSH is not set
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERIALBLASTER is not set
# CONFIG_EXAMPLES_SERIALRX is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_SLCD is not set
# CONFIG_EXAMPLES_SMART is not set
# CONFIG_EXAMPLES_TCPECHO is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
# CONFIG_NSH_LIBRARY is not set
#
# NxWidgets/NxWM
#
#
# Platform-specific Support
#
# CONFIG_PLATFORM_CONFIGDATA is not set
#
# System Libraries and NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# EMACS-like Command Line Editor
#
# CONFIG_SYSTEM_CLE is not set
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# FLASH Erase-all Command
#
#
# Intel HEX to binary conversion
#
CONFIG_SYSTEM_HEX2BIN=y
# CONFIG_SYSTEM_HEX2BIN_DEBUG is not set
#
# I2C tool
#
#
# INI File Parser
#
# CONFIG_SYSTEM_INIFILE is not set
#
# NxPlayer media player library / command Line
#
# CONFIG_SYSTEM_NXPLAYER is not set
#
# RAM test
#
# CONFIG_SYSTEM_RAMTEST is not set
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# P-Code Support
#
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# VI Work-Alike Editor
#
# CONFIG_SYSTEM_VI is not set
#
# Stack Monitor
#
#
# USB CDC/ACM Device Commands
#
#
# USB Composite Device Commands
#
#
# USB Mass Storage Device Commands
#
#
# USB Monitor
#
#
# Zmodem Commands
#
# CONFIG_SYSTEM_ZMODEM is not set

76
configs/sama5d4-ek/dramboot/setenv.sh Executable file
View File

@ -0,0 +1,76 @@
#!/bin/bash
# configs/sama5d4-ek/dramboot/setenv.sh
#
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the Atmel GCC
# toolchain under Windows. You will also have to edit this if you install
# this toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm/staging_dir/bin"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

4
configs/sama5d4-ek/src/Makefile
View File

@ -62,6 +62,10 @@ ifeq ($(CONFIG_SAMA5_EBICS3_NAND),y)
CSRCS += sam_nandflash.c
endif
ifeq ($(CONFIG_SAMA5D4EK_DRAM_MAIN),y)
CSRCS += dram_main.c
endif
ifeq ($(CONFIG_MTD_AT25),y)
ifeq ($(CONFIG_SAMA5_SPI0),y)
CSRCS += sam_at25.c

155
configs/sama5d4-ek/src/dram_main.c Normal file
View File

@ -0,0 +1,155 @@
/*****************************************************************************
* configs/sama5d4-ek/src/dram_main.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <debug.h>
#include <arch/irq.h>
#include <apps/hex2bin.h>
#include "up_arch.h"
#include "mmu.h"
#include "cache.h"
#include "sama5d4-ek.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#define DRAM_ENTRY ((dram_entry_t)SAM_DDRCS_VSECTION)
#define DRAM_WAIT 1
#define DRAM_NOWAIT 0
#ifdef CONFIG_SAMA5D4EK_DRAM_START
# define DRAM_BOOT_MODE DRAM_NOWAIT
#else
# define DRAM_BOOT_MODE DRAM_WAIT
#endif
/****************************************************************************
* Private Types
****************************************************************************/
typedef void (*dram_entry_t)(void);
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: dram_main
*
* Description:
* dram_main is a tiny program that runs in ISRAM. dram_main will
* configure DRAM, present a prompt, load and Intel HEX file into DRAM,
* and either start that program or wait for you to break in with the
* debugger.
*
****************************************************************************/
int dram_main(int argc, char *argv)
{
int ret;
/* Here we have a in memory value we can change in the debugger
* to begin booting in NOR Flash
*/
static volatile uint32_t wait = DRAM_BOOT_MODE;
/* DRAM was already initialized at boot time, so we are ready to load the
* Intel HEX stream into DRAM.
*/
printf("Send Intel HEX file now\n");
fflush(stdout);
ret = hex2mem(0, /* Accept Intel HEX on stdin */
(uint32_t)SAM_DDRCS_VSECTION,
(uint32_t)(SAM_DDRCS_VSECTION + CONFIG_SAMA5_DDRCS_SIZE),
0);
if (ret < 0)
{
/* We failed the load */
printf("ERROR: Intel HEX file load failed: %d\n", ret);
fflush(stdout);
for(;;);
}
/* Interrupts must be disabled through the following. In this configuration,
* there should only be timer interrupts. Your NuttX configuration must use
* CONFIG_SERIAL_LOWCONSOLE=y or printf() will hang when the interrupts
* are disabled!
*/
(void)irqsave();
/* Disable the caches and the MMU. Disabling the MMU should be safe here
* because there is a 1-to-1 identity mapping between the physical and
* virtual addressing.
*/
cp15_disable_mmu();
cp15_disable_caches();
/* Invalidate caches and TLBs */
cp15_invalidate_icache();
cp15_invalidate_dcache_all();
cp15_invalidate_tlbs();
/* Then jump into NOR flash */
while (wait)
{
}
DRAM_ENTRY();
return 0; /* We should not get here in either case */
}