sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Serial driver needed even when no console; Fix user LED settings in all STM32 configurations

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5575 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2013-01-28 15:03:17 +00:00
parent a502d50e1e
commit 40717da192
27 changed files with 299 additions and 86 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
ChangeLog
View File

@ -4050,4 +4050,11 @@
configuration that uses USB CDC/ACM for the NSH console.
* configs/stm32f4discovery/nsh: Converted to use the kconfig-frontends
tools.
* configs/*/src/up_userleds.c: Fix a error that was cloned into
all STM32 user LED code. The wrong defintions were being used
to set LEDs on or off.
* arch/*/common/up_internal.h and arch/*/common/up_initialize.c:
Serial was driver was not being built if there is no console
device. Obviously, the serial driver may be needed even in
this case.

14
arch/arm/src/common/up_initialize.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/arm/src/common/up_initialize.c
*
* Copyright (C) 2007-2010, 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2007-2010, 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -161,11 +161,17 @@ void up_initialize(void)
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the console device driver */
/* Initialize the serial device driver */
#if defined(USE_SERIALDRIVER)
#ifdef USE_SERIALDRIVER
up_serialinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();

17
arch/arm/src/common/up_internal.h
View File

@ -1,7 +1,7 @@
/****************************************************************************
* common/up_internal.h
*
* Copyright (C) 2007-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2007-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -63,7 +63,10 @@
#undef CONFIG_SUPPRESS_UART_CONFIG /* DEFINED: Do not reconfig UART */
#undef CONFIG_DUMP_ON_EXIT /* DEFINED: Dump task state on exit */
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS == 0
# undef USE_SERIALDRIVER
@ -84,6 +87,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

17
arch/avr/src/at32uc3/at32uc3_config.h
View File

@ -1,7 +1,7 @@
/************************************************************************************
* arch/avr/src/at32uc3/at32uc3_config.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -144,7 +144,10 @@
# undef HAVE_SERIAL_CONSOLE
#endif
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
@ -168,6 +171,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

17
arch/avr/src/at90usb/at90usb_config.h
View File

@ -1,7 +1,7 @@
/************************************************************************************
* arch/avr/src/at90usb/at90usb_config.h
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -63,7 +63,10 @@
# undef HAVE_SERIAL_CONSOLE
#endif
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
@ -87,6 +90,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

17
arch/avr/src/atmega/atmega_config.h
View File

@ -1,7 +1,7 @@
/************************************************************************************
* arch/avr/src/atmega/atmega_config.h
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -68,7 +68,10 @@
# undef HAVE_SERIAL_CONSOLE
#endif
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
@ -92,6 +95,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

28
arch/avr/src/common/up_initialize.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/avr/src/common/up_initialize.c
*
* Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2010, 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -57,6 +57,10 @@
* up_serialinit to be incorrectly called if there is no USART configured to
* be an RS-232 device (see as an example arch/avr/src/at32uc23/at32uc3_config.h)
* This will probably have to be revisited someday.
*
* If a console is enabled and no other console device is specified, then a
* serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
@ -78,6 +82,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG
@ -182,11 +196,17 @@ void up_initialize(void)
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the console device driver */
/* Initialize the serial device driver */
#if defined(USE_SERIALDRIVER)
#ifdef USE_SERIALDRIVER
up_serialinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();

14
arch/hc/src/common/up_initialize.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/hc/src/common/up_initialize.c
*
* Copyright (C) 2009-2010, 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010, 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -149,11 +149,17 @@ void up_initialize(void)
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the console device driver */
/* Initialize the serial device driver */
#if defined(USE_SERIALDRIVER)
#ifdef USE_SERIALDRIVER
up_serialinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();

17
arch/hc/src/common/up_internal.h
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/hc/src/common/up_internal.h
*
* Copyright (C) 2009, 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2009, 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -62,7 +62,10 @@
#undef CONFIG_SUPPRESS_UART_CONFIG /* DEFINED: Do not reconfig UART */
#undef CONFIG_DUMP_ON_EXIT /* DEFINED: Dump task state on exit */
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
@ -83,6 +86,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

12
arch/mips/src/common/up_initialize.c
View File

@ -151,11 +151,17 @@ void up_initialize(void)
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the console device driver */
/* Initialize the serial device driver */
#if defined(USE_SERIALDRIVER)
#ifdef USE_SERIALDRIVER
up_serialinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();

15
arch/mips/src/common/up_internal.h
View File

@ -60,7 +60,10 @@
#undef CONFIG_SUPPRESS_UART_CONFIG /* DEFINED: Do not reconfig UART */
#undef CONFIG_DUMP_ON_EXIT /* DEFINED: Dump task state on exit */
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
@ -81,6 +84,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

22
arch/sh/src/common/up_initialize.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/sh/src/common/up_initialize.c
*
* Copyright (C) 2008-2010, 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2008-2010, 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -136,16 +136,20 @@ void up_initialize(void)
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the console device driver. NOTE that the naming
* implies that the console is a serial driver. That is usually the case,
* however, if no UARTs are enabled, the console could als be provided
* through some other device, such as an LCD. Architecture-specific logic
* will have to detect that case.
/* Initialize the serial device driver */
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver). NOTE that the naming implies that the console is a serial
* driver. That is usually the case, however, if no UARTs are enabled, the
* console could als be provided through some other device, such as an LCD.
* Architecture-specific logic will have to detect that case.
*/
#if defined(USE_SERIALDRIVER)
up_consoleinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();

15
arch/sh/src/common/up_internal.h
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/sh/src/common/up_internal.h
*
* Copyright (C) 2008-2009, 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2008-2009, 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -67,6 +67,9 @@
* however, if no UARTs are enabled, the console could als be provided
* through some other device, such as an LCD. Architecture-specific logic
* will have to detect that case.
*
* If a console is enabled and no other console device is specified, then
* a serial console is assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
@ -88,6 +91,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

14
arch/x86/src/common/up_initialize.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/x86/src/common/up_initialize.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -151,11 +151,17 @@ void up_initialize(void)
devnull_register(); /* Standard /dev/null */
#endif
/* Initialize the console device driver */
/* Initialize the serial device driver */
#if defined(USE_SERIALDRIVER)
#ifdef USE_SERIALDRIVER
up_serialinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
#endif
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();

17
arch/x86/src/common/up_internal.h
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/x86/src/common/up_internal.h
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -62,7 +62,10 @@
#undef CONFIG_SUPPRESS_UART_CONFIG /* DEFINED: Do not reconfig UART */
#undef CONFIG_DUMP_ON_EXIT /* DEFINED: Dump task state on exit */
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
@ -83,6 +86,16 @@
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
#endif
/* Determine which device to use as the system logging device */
#ifndef CONFIG_SYSLOG

6
arch/z16/src/common/up_initialize.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* common/up_initialize.c
*
* Copyright (C) 2008-2009, 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2008-2009, 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -168,7 +168,9 @@ void up_initialize(void)
up_serialinit();
#endif
/* Initialize the console device driver */
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();

35
arch/z16/src/common/up_internal.h
View File

@ -1,7 +1,7 @@
/****************************************************************************
* common/up_internal.h
*
* Copyright (C) 2008-2009, 2011-2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2008-2009, 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -60,15 +60,42 @@
#undef CONFIG_Z16_LOWPUTC /* Support up_lowputc for debug */
#undef CONFIG_Z16_LOWGETC /* support up_lowgetc for debug */
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if defined(CONFIG_Z16_LOWPUTC) || defined(CONFIG_Z16_LOWGETC) || \
CONFIG_NFILE_DESCRIPTORS == 0 || defined(CONFIG_DEV_LOWCONSOLE)
# define USE_LOWCONSOLE 1
# define USE_LOWUARTINIT 1
#elif defined(CONFIG_DEV_CONSOLE) && CONFIG_NFILE_DESCRIPTORS > 0
#elif !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
# undef USE_EARLYSERIALINIT
# undef CONFIG_DEV_LOWCONSOLE
# undef CONFIG_RAMLOG_CONSOLE
#else
# if defined(CONFIG_RAMLOG_CONSOLE)
# undef USE_SERIALDRIVER
# undef USE_EARLYSERIALINIT
# undef CONFIG_DEV_LOWCONSOLE
# elif defined(CONFIG_DEV_LOWCONSOLE)
# undef USE_SERIALDRIVER
# undef USE_EARLYSERIALINIT
# else
# define USE_SERIALDRIVER 1
# define USE_EARLYSERIALINIT 1
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
# define USE_EARLYSERIALINIT 1
#endif
/* Determine which device to use as the system logging device */

14
arch/z80/src/common/up_initialize.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/z80/src/common/up_initialize.c
*
* Copyright (C) 2007-2009, 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2007-2009, 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -161,15 +161,15 @@ void up_initialize(void)
/* Initialize the serial device driver */
#ifdef USE_LOWSERIALINIT
up_lowserialinit();
#ifdef USE_SERIALDRIVER
up_serialinit();
#endif
/* Initialize the console device driver */
/* Initialize the console device driver (if it is other than the standard
* serial driver).
*/
#if defined(USE_SERIALDRIVER)
up_serialinit();
#elif defined(CONFIG_DEV_LOWCONSOLE)
#if defined(CONFIG_DEV_LOWCONSOLE)
lowconsole_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
ramlog_consoleinit();

31
arch/z80/src/common/up_internal.h
View File

@ -66,7 +66,10 @@
* Definitions
****************************************************************************/
/* Determine which (if any) console driver to use */
/* Determine which (if any) console driver to use. If a console is enabled
* and no other console device is specified, then a serial console is
* assumed.
*/
#if CONFIG_NFILE_DESCRIPTORS == 0 || defined(CONFIG_DEV_LOWCONSOLE)
# undef USE_SERIALDRIVER
@ -75,9 +78,31 @@
# else
# undef USE_LOWSERIALINIT
# endif
#elif defined(CONFIG_DEV_CONSOLE) && CONFIG_NFILE_DESCRIPTORS > 0
#elif !defined(CONFIG_DEV_CONSOLE) || CONFIG_NFILE_DESCRIPTORS <= 0
# undef USE_SERIALDRIVER
# undef USE_LOWSERIALINIT
# undef CONFIG_DEV_LOWCONSOLE
# undef CONFIG_RAMLOG_CONSOLE
#else
# undef USE_LOWSERIALINIT
# if defined(CONFIG_RAMLOG_CONSOLE)
# undef USE_SERIALDRIVER
# undef CONFIG_DEV_LOWCONSOLE
# elif defined(CONFIG_DEV_LOWCONSOLE)
# undef USE_SERIALDRIVER
# else
# define USE_SERIALDRIVER 1
# endif
#endif
/* If some other device is used as the console, then the serial driver may
* still be needed. Let's assume that if the upper half serial driver is
* built, then the lower half will also be needed. There is no need for
* the early serial initialization in this case.
*/
#if !defined(USE_SERIALDRIVER) && defined(CONFIG_STANDARD_SERIAL)
# define USE_SERIALDRIVER 1
# undef USE_LOWSERIALINIT
#endif
/****************************************************************************

8
configs/cloudctrl/src/up_userleds.c
View File

@ -123,10 +123,10 @@ void stm32_setled(int led, bool ledon)
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(BOARD_LED4, (ledset & BOARD_LED4_BIT) == 0);
stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */

6
configs/fire-stm32v2/src/up_userleds.c
View File

@ -131,9 +131,9 @@ void stm32_setled(int led, bool ledon)
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */

8
configs/lpc4330-xplorer/src/up_userleds.c
View File

@ -140,8 +140,8 @@ void lpc43_ledinit(void)
void lpc43_setled(int led, bool ledon)
{
uint16_t gpiocfg = (led == BOARD_LED1 ? BOARD_LED1 : BOARD_LED2);
lpc43_gpio_write(GPIO_LED1, !ledon);
uint16_t gpiocfg = (led == BOARD_LED1 ? GPIO_LED1 : GPIO_LED2);
lpc43_gpio_write(gpiocfg, !ledon);
}
/****************************************************************************
@ -150,8 +150,8 @@ void lpc43_setled(int led, bool ledon)
void lpc43_setleds(uint8_t ledset)
{
lpc43_gpio_write(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
lpc43_gpio_write(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
lpc43_gpio_write(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
lpc43_gpio_write(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */

8
configs/shenzhou/src/up_userleds.c
View File

@ -122,10 +122,10 @@ void stm32_setled(int led, bool ledon)
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(BOARD_LED4, (ledset & BOARD_LED4_BIT) == 0);
stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */

8
configs/stm3220g-eval/src/up_userleds.c
View File

@ -122,10 +122,10 @@ void stm32_setled(int led, bool ledon)
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(BOARD_LED4, (ledset & BOARD_LED4_BIT) == 0);
stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */

8
configs/stm3240g-eval/src/up_userleds.c
View File

@ -122,10 +122,10 @@ void stm32_setled(int led, bool ledon)
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(BOARD_LED4, (ledset & BOARD_LED4_BIT) == 0);
stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0);
}
#endif /* !CONFIG_ARCH_LEDS */

2
configs/stm32f4discovery/README.txt
View File

@ -269,7 +269,7 @@ LEDs
====
The STM32F4Discovery board has four LEDs; green, organge, red and blue on the
board.. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
board. These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is
defined. In that case, the usage by the board port is defined in
include/board.h and src/up_leds.c. The LEDs are used to encode OS-related
events as follows:

8
configs/stm32f4discovery/src/up_userleds.c
View File

@ -222,10 +222,10 @@ void stm32_setled(int led, bool ledon)
void stm32_setleds(uint8_t ledset)
{
stm32_gpiowrite(BOARD_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(BOARD_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(BOARD_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(BOARD_LED4, (ledset & BOARD_LED4_BIT) == 0);
stm32_gpiowrite(GPIO_LED1, (ledset & BOARD_LED1_BIT) == 0);
stm32_gpiowrite(GPIO_LED2, (ledset & BOARD_LED2_BIT) == 0);
stm32_gpiowrite(GPIO_LED3, (ledset & BOARD_LED3_BIT) == 0);
stm32_gpiowrite(GPIO_LED4, (ledset & BOARD_LED4_BIT) == 0);
}
/****************************************************************************