sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Reorganize some AT91SAM3U files; Add an NSH kernel build configuration to the WaveSahhare Open1788 board

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5732 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2013-03-11 20:26:55 +00:00
parent f74aefa76d
commit 41444f7836
19 changed files with 1605 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

62
configs/open1788/README.txt
View File

@ -292,4 +292,66 @@ CONFIGURATION
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
knsh
----
This is identical to the nsh configuration below except that NuttX
is built as a kernel-mode, monolithic module and the user applications
are built separately. This build requires a special make command; not
just 'make' but make with the following two arguments:
make pass1 pass2
This is required because in the normal case (just 'make'), make will
create all dependencies then execute the pass1 and pass2 targets. But
this example, pass2 depends on auto-generatd files produced during pass1.
This special make command ('make pass1 pass2') will make the dependencies
separately for each pass.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. Uses the older, OABI, buildroot toolchain. But that is easily
reconfigured:
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
3. At the end of the build, there four files will top-level build
directory:
nuttx_user.elf - The pass1 user-space ELF file
nuttx - The pass2 kernel-space ELF file
nuttx_user.hex - The pass1 Intel HEX format file
nuttx.hex - The pass2 Intel HEX file
System.map - Symbols in the kernel-space ELF file
User.map - Symbols in the user-space ELF file
nsh
---
Configures the NuttShell (nsh) located at examples/nsh. The
Configuration enables both the serial NSH interface.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. Uses the older, OABI, buildroot toolchain. But that is easily
reconfigured:
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain

114
configs/open1788/kernel/Makefile Normal file
View File

@ -0,0 +1,114 @@
############################################################################
# configs/open1788/kernel/Makefile
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
# This is the directory for the board-specific header files
BOARD_INCLUDE = $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)include
# The entry point name (if none is provided in the .config file)
CONFIG_USER_ENTRYPOINT ?= user_start
ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
# Get the paths to the libraries and the links script path in format that
# is appropriate for the host OS
ifeq ($(WINTOOL),y)
# Windows-native toolchains
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
else
# Linux/Cygwin-native toolchain
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
endif
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
USER_LDLIBS = $(patsubst lib%,-l%,$(basename $(notdir $(USERLIBS))))
USER_LIBGCC = "${shell $(CC) -print-libgcc-file-name}"
# Source files
CSRCS = up_userspace.c
COBJS = $(CSRCS:.c=$(OBJEXT))
OBJS = $(COBJS)
# Targets:
all: $(TOPDIR)$(DELIM)nuttx_user.elf $(TOPDIR)$(DELIM)User.map
.PHONY: depend clean distclean
$(COBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
# Create the nuttx_user.elf file containing all of the user-mode code
nuttx_user.elf: $(OBJS)
$(Q) $(LD) -o $@ $(USER_LDFLAGS) $(USER_LIBPATHS) $(OBJS) --start-group $(USER_LDLIBS) --end-group $(USER_LIBGCC)
$(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
@echo "LD: nuttx_user.elf"
$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
ifeq ($(CONFIG_INTELHEX_BINARY),y)
@echo "CP: nuttx_user.hex"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.hex
endif
ifeq ($(CONFIG_MOTOROLA_SREC),y)
@echo "CP: nuttx_user.srec"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.srec
endif
ifeq ($(CONFIG_RAW_BINARY),y)
@echo "CP: nuttx_user.bin"
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.bin
endif
$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
@echo "MK: User.map"
$(Q) $(NM) nuttx_user.elf >$(TOPDIR)$(DELIM)User.map
$(Q) $(CROSSDEV)size nuttx_user.elf
.depend:
depend: .depend
clean:
$(call DELFILE, nuttx_user.elf)
$(call DELFILE, "$(TOPDIR)$(DELIM)nuttx_user.elf")
$(call DELFILE, "$(TOPDIR)$(DELIM)User.map")
$(call CLEAN)
distclean: clean

129
configs/open1788/kernel/up_userspace.c Normal file
View File

@ -0,0 +1,129 @@
/****************************************************************************
* configs/open1788/kernel/up_userspace.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdlib.h>
#include <nuttx/userspace.h>
#include <nuttx/wqueue.h>
#include <nuttx/mm.h>
#if defined(CONFIG_NUTTX_KERNEL) && !defined(__KERNEL__)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef CONFIG_NUTTX_USERSPACE
# error "CONFIG_NUTTX_USERSPACE not defined"
#endif
#if CONFIG_NUTTX_USERSPACE != 0x00010000
# error "CONFIG_NUTTX_USERSPACE must be 0x00010000 to match user-space.ld"
#endif
/****************************************************************************
* Public Data
****************************************************************************/
/* These 'addresses' of these values are setup by the linker script. They are
* not actual uint32_t storage locations! They are only used meaningfully in the
* following way:
*
* - The linker script defines, for example, the symbol_sdata.
* - The declareion extern uint32_t _sdata; makes C happy. C will believe
* that the value _sdata is the address of a uint32_t variable _data (it is
* not!).
* - We can recoved the linker value then by simply taking the address of
* of _data. like: uint32_t *pdata = &_sdata;
*/
extern uint32_t _stext; /* Start of .text */
extern uint32_t _etext; /* End_1 of .text + .rodata */
extern const uint32_t _eronly; /* End+1 of read only section (.text + .rodata) */
extern uint32_t _sdata; /* Start of .data */
extern uint32_t _edata; /* End+1 of .data */
extern uint32_t _sbss; /* Start of .bss */
extern uint32_t _ebss; /* End+1 of .bss */
/* This is the user space entry point */
int CONFIG_USER_ENTRYPOINT(int argc, char *argv[]);
const struct userspace_s userspace __attribute__ ((section (".userspace"))) =
{
/* General memory map */
.us_entrypoint = (main_t)CONFIG_USER_ENTRYPOINT,
.us_textstart = (uintptr_t)&_stext,
.us_textend = (uintptr_t)&_etext,
.us_datasource = (uintptr_t)&_eronly,
.us_datastart = (uintptr_t)&_sdata,
.us_dataend = (uintptr_t)&_edata,
.us_bssstart = (uintptr_t)&_sbss,
.us_bssend = (uintptr_t)&_ebss,
/* Memory manager entry points (declared in include/nuttx/mm.h) */
.mm_initialize = umm_initialize,
.mm_addregion = umm_addregion,
.mm_trysemaphore = umm_trysemaphore,
.mm_givesemaphore = umm_givesemaphore,
/* Memory manager entry points (declared in include/stdlib.h) */
.mm_malloc = malloc,
.mm_realloc = realloc,
.mm_zalloc = zalloc,
.mm_free = free,
/* User-space work queue support (declared in include/nuttx/wqueue.h) */
#if defined(CONFIG_SCHED_WORKQUEUE) && defined(CONFIG_SCHED_USRWORK)
.work_usrstart = work_usrstart;
#endif
};
/****************************************************************************
* Public Functions
****************************************************************************/
#endif /* CONFIG_NUTTX_KERNEL && !__KERNEL__ */

109
configs/open1788/knsh/Make.defs Normal file
View File

@ -0,0 +1,109 @@
############################################################################
# configs/open1788/knsh/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/kernel-space.ld}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/kernel-space.ld
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

722
configs/open1788/knsh/defconfig Executable file
View File

@ -0,0 +1,722 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="../apps"
CONFIG_BUILD_2PASS=y
CONFIG_PASS1_TARGET="all"
CONFIG_PASS1_BUILDIR="configs/open1788/kernel"
CONFIG_PASS1_OBJECT=""
CONFIG_NUTTX_KERNEL=y
CONFIG_NUTTX_USERSPACE=0x00010000
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
CONFIG_INTELHEX_BINARY=y
# CONFIG_MOTOROLA_SREC is not set
# CONFIG_RAW_BINARY is not set
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_LM is not set
CONFIG_ARCH_CHIP_LPC17XX=y
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
# CONFIG_ARCH_CHIP_STM32 is not set
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="lpc17xx"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
CONFIG_ARCH_HAVE_MPU=y
CONFIG_ARMV7M_MPU=y
CONFIG_ARMV7M_MPU_NREGIONS=8
#
# ARMV7M Configuration Options
#
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
#
# LPC17xx Configuration Options
#
# CONFIG_ARCH_CHIP_LPC1751 is not set
# CONFIG_ARCH_CHIP_LPC1752 is not set
# CONFIG_ARCH_CHIP_LPC1754 is not set
# CONFIG_ARCH_CHIP_LPC1756 is not set
# CONFIG_ARCH_CHIP_LPC1758 is not set
# CONFIG_ARCH_CHIP_LPC1759 is not set
# CONFIG_ARCH_CHIP_LPC1764 is not set
# CONFIG_ARCH_CHIP_LPC1765 is not set
# CONFIG_ARCH_CHIP_LPC1766 is not set
# CONFIG_ARCH_CHIP_LPC1767 is not set
# CONFIG_ARCH_CHIP_LPC1768 is not set
# CONFIG_ARCH_CHIP_LPC1769 is not set
# CONFIG_ARCH_CHIP_LPC1773 is not set
# CONFIG_ARCH_CHIP_LPC1774 is not set
# CONFIG_ARCH_CHIP_LPC1776 is not set
# CONFIG_ARCH_CHIP_LPC1777 is not set
# CONFIG_ARCH_CHIP_LPC1778 is not set
# CONFIG_ARCH_CHIP_LPC1785 is not set
# CONFIG_ARCH_CHIP_LPC1786 is not set
# CONFIG_ARCH_CHIP_LPC1787 is not set
CONFIG_ARCH_CHIP_LPC1788=y
CONFIG_ARCH_FAMILY_LPC178X=y
CONFIG_ARCH_HAVE_SDIO=y
#
# LPC17xx Peripheral Support
#
CONFIG_LPC17_MAINOSC=y
CONFIG_LPC17_PLL0=y
CONFIG_LPC17_PLL1=y
# CONFIG_LPC17_EMC is not set
# CONFIG_LPC17_ETHERNET is not set
# CONFIG_LPC17_LCD is not set
# CONFIG_LPC17_USBHOST is not set
# CONFIG_LPC17_USBDEV is not set
# CONFIG_LPC17_SDCARD=y
CONFIG_LPC17_UART0=y
# CONFIG_LPC17_UART1 is not set
# CONFIG_LPC17_UART2 is not set
# CONFIG_LPC17_UART3 is not set
# CONFIG_LPC17_UART4 is not set
# CONFIG_LPC17_CAN1 is not set
# CONFIG_LPC17_CAN2 is not set
# CONFIG_LPC17_SSP0 is not set
# CONFIG_LPC17_SSP1 is not set
# CONFIG_LPC17_SSP2 is not set
# CONFIG_LPC17_I2C0 is not set
# CONFIG_LPC17_I2C1 is not set
# CONFIG_LPC17_I2C2 is not set
# CONFIG_LPC17_I2S is not set
# CONFIG_LPC17_TMR0 is not set
# CONFIG_LPC17_TMR1 is not set
# CONFIG_LPC17_TMR2 is not set
# CONFIG_LPC17_TMR3 is not set
# CONFIG_LPC17_RIT is not set
# CONFIG_LPC17_PWM0 is not set
# CONFIG_LPC17_PWM1 is not set
# CONFIG_LPC17_QEI is not set
# CONFIG_LPC17_RTC is not set
# CONFIG_LPC17_WDT is not set
# CONFIG_LPC17_ADC is not set
# CONFIG_LPC17_DAC is not set
CONFIG_LPC17_GPDMA=y
# CONFIG_LPC17_CRC is not set
# CONFIG_LPC17_FLASH is not set
# CONFIG_LPC17_EEPROM is not set
#
# Serial driver options
#
# CONFIG_SERIAL_TERMIOS is not set
# CONFIG_UART0_FLOWCONTROL is not set
#
# ADC driver options
#
#
# CAN driver options
#
# CONFIG_GPIO_IRQ is not set
#
# I2C driver options
#
#
# SDIO Configuration
#
CONFIG_SDIO_DMA=y
CONFIG_SDIO_DMAPRIO=0x0
# CONFIG_SDIO_WIDTH_D1_ONLY is not set
#
# Ethernet driver options
#
#
# USB device driver options
#
#
# USB host driver options
#
#
# External Memory Configuration
#
CONFIG_ARCH_HAVE_EXTNAND=y
CONFIG_ARCH_HAVE_EXTNOR=y
CONFIG_ARCH_HAVE_EXTDRAM=y
CONFIG_ARCH_HAVE_EXTSRAM0=y
CONFIG_ARCH_EXTNAND=y
CONFIG_ARCH_EXTNANDSIZE=134217728
CONFIG_ARCH_EXTNOR=y
CONFIG_ARCH_EXTNORSIZE=4194304
CONFIG_ARCH_EXTDRAM=y
CONFIG_ARCH_EXTDRAMSIZE=67108864
CONFIG_ARCH_EXTDRAMHEAP=y
CONFIG_ARCH_EXTSRAM0=y
CONFIG_ARCH_EXTSRAM0SIZE=131072
CONFIG_ARCH_EXTSRAM0HEAP=y
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=11934
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_SIZE=65536
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_OPEN1788=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="open1788"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_HAVE_BUTTONS=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_HAVE_IRQBUTTONS=y
# CONFIG_ARCH_IRQBUTTONS is not set
CONFIG_NSH_MMCSDMINOR=0
CONFIG_NSH_MMCSDSLOTNO=0
#
# Board-Specific Options
#
#
# RTOS Features
#
CONFIG_BOARD_INITIALIZE=y
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2013
CONFIG_START_MONTH=3
CONFIG_START_DAY=11
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
CONFIG_SIG_SIGWORK=17
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
CONFIG_SYS_RESERVED=4
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
CONFIG_LOOP=y
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
CONFIG_BCH=y
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
CONFIG_MMCSD=y
CONFIG_MMCSD_NSLOTS=1
# CONFIG_MMCSD_READONLY is not set
# CONFIG_MMCSD_MULTIBLOCK_DISABLE is not set
CONFIG_MMCSD_MMCSUPPORT=y
CONFIG_MMCSD_HAVECARDDETECT=y
CONFIG_MMCSD_SDIO=y
# CONFIG_SDIO_MUXBUS is not set
CONFIG_SDIO_BLOCKSETUP=y
# CONFIG_MTD is not set
CONFIG_PIPES=y
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_UART0=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_UART0_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# UART0 Configuration
#
CONFIG_UART0_RXBUFSIZE=256
CONFIG_UART0_TXBUFSIZE=256
CONFIG_UART0_BAUD=115200
CONFIG_UART0_BITS=8
CONFIG_UART0_PARITY=0
CONFIG_UART0_2STOP=0
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
CONFIG_FS_FAT=y
CONFIG_FAT_LCNAMES=y
CONFIG_FAT_LFN=y
CONFIG_FAT_MAXFNAME=32
# CONFIG_FS_FATTIME is not set
# CONFIG_FAT_DMAMEMORY is not set
# CONFIG_FS_NXFFS is not set
CONFIG_FS_ROMFS=y
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
CONFIG_MM_MULTIHEAP=y
CONFIG_MM_KERNEL_HEAP=y
CONFIG_MM_KERNEL_HEAPSIZE=8192
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=2
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
# CONFIG_BUILTIN is not set
# CONFIG_PIC is not set
CONFIG_SYMTAB_ORDEREDBYNAME=y
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
CONFIG_SCHED_WORKQUEUE=y
CONFIG_SCHED_HPWORK=y
CONFIG_SCHED_WORKPRIORITY=192
CONFIG_SCHED_WORKPERIOD=50000
CONFIG_SCHED_WORKSTACKSIZE=2048
# CONFIG_SCHED_LPWORK is not set
# CONFIG_SCHED_USRWORK is not set
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POLL is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
CONFIG_NSH_DISABLE_DD=y
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
# CONFIG_NSH_DISABLE_IFCONFIG is not set
# CONFIG_NSH_DISABLE_KILL is not set
CONFIG_NSH_DISABLE_LOSETUP=y
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
CONFIG_NSH_DISABLE_MKFATFS=y
# CONFIG_NSH_DISABLE_MKFIFO is not set
CONFIG_NSH_DISABLE_MKRD=y
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
CONFIG_NSH_DISABLE_PS=y
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=512
CONFIG_NSH_LINELEN=80
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
# CONFIG_NSH_ROMFSETC is not set
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
# CONFIG_NSH_ARCHINIT is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# USB Monitor
#

73
configs/open1788/knsh/setenv.sh Executable file
View File

@ -0,0 +1,73 @@
#!/bin/bash
# configs/open1788/knsh/setenv.sh
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$_" = "$0" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
WD=`pwd`
if [ ! -x "setenv.sh" ]; then
echo "This script must be executed from the top-level NuttX build directory"
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then
export PATH_ORIG="${PATH}"
fi
# This is the Cygwin path to the location where I installed the CodeSourcery
# toolchain under windows. You will also have to edit this if you install
# the CodeSourcery toolchain in any other location
# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
# These are the Cygwin paths to the locations where I installed the Atollic
# toolchain under windows. You will also have to edit this if you install
# the Atollic toolchain in any other location. /usr/bin is added before
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
# at those locations as well.
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
# This is the Cygwin path to the location where I build the buildroot
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# The Olimex-lpc1766stk/tools directory
export LPCTOOL_DIR="${WD}/configs/open1788/tools"
# Add the path to the toolchain and tools directory to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

134
configs/open1788/scripts/kernel-space.ld Executable file
View File

@ -0,0 +1,134 @@
/****************************************************************************
* configs/open1788/scripts/kernel-space.ld
*
* Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The AT91SAM3U-4 has 256Kb of FLASH beginning at address 0x0008:0000,
* 32Kb of SRAM beginning at address 0x2000:0000, and 16Kb of SRAM beginning
* at address 0x2008:000 (used only for heap). When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*
* For MPU support, the kernel-mode NuttX section is assumed to be 64Kb of
* FLASH and 4Kb of SRAM. That, of course, can be optimized as needed (See
* also configs/open1788/scripts/kernel.ld).
*/
MEMORY
{
/* 256Kb FLASH */
kflash (rx) : ORIGIN = 0x00080000, LENGTH = 64K
uflash (rx) : ORIGIN = 0x00090000, LENGTH = 192K
/* 32Kb SRAM */
ksram (rwx) : ORIGIN = 0x20000000, LENGTH = 4K
usram (rwx) : ORIGIN = 0x20001000, LENGTH = 28K
/* 16Kb SRAM */
sram2 (rwx) : ORIGIN = 0x20080000, LENGTH = 16K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > kflash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > kflash
.ARM.extab : {
*(.ARM.extab*)
} > kflash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > kflash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > ksram AT > kflash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > ksram
/* Stabs debugging sections */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

153
configs/open1788/scripts/user-space.ld Normal file
View File

@ -0,0 +1,153 @@
/****************************************************************************
* configs/open1788/scripts/user-space.ld
*
* Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The LPC1788 has 512Kb of FLASH beginning at address 0x0000:0000 and
* 96Kb of total SRAM: 64Kb of SRAM in the CPU block beginning at address
* 0x10000000 and 32Kb of Peripheral SRAM in two banks, 8Kb at addresses
* 0x20000000 bank0 first and 8kb at 0x20002000 at bank0 second. And 16Kb
* at 0x20004000 on bank1.
*
* For MPU support, the kernel-mode NuttX section is assumed to be 64Kb of
* FLASH and 4Kb of SRAM. That, of course, can be optimized as needed (See
* also configs/open1788/scripts/kernel-space.ld).
*/
MEMORY
{
/* 256Kb FLASH */
kflash (rx) : ORIGIN = 0x00000000, LENGTH = 64K
uflash (rx) : ORIGIN = 0x00010000, LENGTH = 448K
/* 64Kb of SRAM in the CPU block */
ksram (rwx) : ORIGIN = 0x20000000, LENGTH = 4K
usram (rwx) : ORIGIN = 0x20001000, LENGTH = 60K
/* Other peripheral memory (free, nothing is linked here) */
ahbram8_b0a(rwx) : ORIGIN = 0x20000000, LENGTH = 8K
ahbram8_b0b(rwx) : ORIGIN = 0x20002000, LENGTH = 8K
ahbram16(rwx) : ORIGIN = 0x20004000, LENGTH = 16K
}
/* Make sure that the critical memory management functions are in user-space.
* Currently, the plan is that the memory manager will reside in user-space
* but be usable both by kernel- and user-space code
*/
EXTERN(umm_initialize)
EXTERN(umm_addregion)
EXTERN(umm_trysemaphore)
EXTERN(umm_givesemaphore)
EXTERN(malloc)
EXTERN(realloc)
EXTERN(zalloc)
EXTERN(free)
OUTPUT_ARCH(arm)
SECTIONS
{
.userspace : {
*(.userspace)
} > uflash
.text : {
_stext = ABSOLUTE(.);
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > uflash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > uflash
.ARM.extab : {
*(.ARM.extab*)
} > uflash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > uflash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > usram AT > uflash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > usram
/* Stabs debugging sections */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

14
configs/open1788/src/Makefile
View File

@ -52,7 +52,7 @@ ifeq ($(CONFIG_LPC17_EMC_SDRM),y)
CSRCS += lpc17_sdraminitialize.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
ifeq ($(CONFIG_NSH_LIBRARY),y)
CSRCS += lpc17_nsh.c
endif
@ -63,7 +63,7 @@ CSRCS += lpc17_userleds.c
endif
ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += up_buttons.c
CSRCS += lpc17_buttons.c
endif
AOBJS = $(ASRCS:.S=$(OBJEXT))
@ -74,11 +74,13 @@ OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}"
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/common}"
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
CFLAGS += -I$(ARCH_SRCDIR)/chip
CFLAGS += -I$(ARCH_SRCDIR)/common
CFLAGS += -I$(ARCH_SRCDIR)/armv7-m
endif
all: libboard$(LIBEXT)

26
configs/open1788/src/lpc17_boardinitialize.c
View File

@ -107,3 +107,29 @@ void lpc17_boardinitialize(void)
up_ledinit();
#endif
}
/****************************************************************************
* Name: board_initialize
*
* Description:
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
* initialization call will be performed in the boot-up sequence to a
* function called board_initialize(). board_initialize() will be
* called immediately after up_intiialize() is called and just before the
* initial application is started. This additional initialization phase
* may be used, for example, to initialize board-specific device drivers.
*
****************************************************************************/
#ifdef CONFIG_BOARD_INITIALIZE
void board_initialize(void)
{
/* Perform NSH initialization here instead of from the NSH. This
* alternative NSH initialization is necessary when NSH is ran in user-space
* but the initialization function must run in kernel space.
*/
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
(void)nsh_archinitialize();
#endif
}
#endif

23
configs/open1788/src/lpc17_buttons.c
View File

@ -59,14 +59,33 @@
/****************************************************************************
* Private Data
****************************************************************************/
/* The Open1788 supports several buttons. All will read "1" when open and "0"
* when closed
*
* USER1 -- Connected to P4[26]
* USER2 -- Connected to P2[22]
* USER3 -- Connected to P0[10]
*
* And a Joystick
*
* JOY_A -- Connected to P2[25]
* JOY_B -- Connected to P2[26]
* JOY_C -- Connected to P2[23]
* JOY_D -- Connected to P2[19]
* JOY_CTR -- Connected to P0[14]
*
* The switches are all connected to ground and should be pulled up and sensed
* with a value of '0' when closed.
*/
/* Pin configuration for each Open1788 button. This array is indexed by
* the BUTTON_* and JOYSTICK_* definitions in board.h
*/
static const lpc17_pinset_t g_buttoncfg[BOARD_NUM_BUTTONS] =
{
GPIO_USER1, GPIO_USER2, GPIO_WAKEUP, GPIO_USER3,
GPIO_JOY_A, GPIO_JOY_B, GPIO_JOY_C, GPIO_JOY_D, GPIO_JOY_CTR
GPIO_USER1, GPIO_USER2, GPIO_USER3, GPIO_JOY_A,
GPIO_JOY_B, GPIO_JOY_C, GPIO_JOY_D, GPIO_JOY_CTR
};
/* This array defines all of the interupt handlers current attached to

13
configs/open1788/src/lpc17_nsh.c
View File

@ -122,13 +122,13 @@
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# if defined(CONFIG_DEBUG) || !defined(CONFIG_NSH_ARCHINIT)
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# if defined(CONFIG_DEBUG) || !defined(CONFIG_NSH_ARCHINIT)
# define message lowsyslog
# else
# define message printf
@ -291,7 +291,14 @@ static int nsh_usbhostinitialize(void)
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
* Perform architecture specific initialization for NSH.
*
* CONFIG_NSH_ARCHINIT=y :
* Called from the NSH library
*
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
* CONFIG_NSH_ARCHINIT=n:
* Called from board_initialize().
*
****************************************************************************/

19
configs/open1788/src/open1788.h
View File

@ -163,6 +163,25 @@ void lpc17_nand_initialize(void);
#endif
#endif /* CONFIG_LPC17_EMC */
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization for NSH.
*
* CONFIG_NSH_ARCHINIT=y :
* Called from the NSH library
*
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
* CONFIG_NSH_ARCHINIT=n:
* Called from board_initialize().
*
****************************************************************************/
#ifdef CONFIG_NSH_LIBRARY
int nsh_archinitialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* _CONFIGS_OPEN1788_SRC_OPEN1788_H */

4
configs/sam3u-ek/README.txt
View File

@ -386,10 +386,10 @@ must be is one of the following:
This is required because in the normal case (just 'make'), make will
create all dependencies then execute the pass1 and pass2 targets. But
this example, pass2 depends on auto-generatd files produced during pass1.
This specall make command ('make pass1 pass2') will make the dependencies
This special make command ('make pass1 pass2') will make the dependencies
separately for each pass.
At there end of the build, there four files will top-level build
At the end of the build, there four files will top-level build
directory:
nuttx_user.elf - The pass1 ELF file

4
configs/sam3u-ek/kernel/Makefile
View File

@ -50,11 +50,11 @@ ENTRYPT = $(patsubst "%",%,$(CONFIG_USER_ENTRYPOINT))
ifeq ($(WINTOOL),y)
# Windows-native toolchains
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel.ld}"
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
else
# Linux/Cygwin-native toolchain
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel.ld
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
endif
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)

2
configs/sam3u-ek/kernel/up_userspace.c
View File

@ -57,7 +57,7 @@
#endif
#if CONFIG_NUTTX_USERSPACE != 0x00090000
# error "CONFIG_NUTTX_USERSPACE must be 0x00090000 to match kernel.ld"
# error "CONFIG_NUTTX_USERSPACE must be 0x00090000 to match user-space.ld"
#endif
/****************************************************************************

4
configs/sam3u-ek/knsh/Make.defs
View File

@ -44,14 +44,14 @@ ifeq ($(WINTOOL),y)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/user.ld}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/kernel-space.ld}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/user.ld
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/kernel-space.ld
endif
CC = $(CROSSDEV)gcc

4
configs/sam3u-ek/scripts/user.ld → configs/sam3u-ek/scripts/kernel-space.ld
View File

@ -1,5 +1,5 @@
/****************************************************************************
* configs/sam3u-ek/scripts/ld.script
* configs/sam3u-ek/scripts/kernel-space.ld
*
* Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
@ -42,7 +42,7 @@
*
* For MPU support, the kernel-mode NuttX section is assumed to be 64Kb of
* FLASH and 4Kb of SRAM. That, of course, can be optimized as needed (See
* also configs/sam3u-ek/kernel/kernel.ld.
* also configs/sam3u-ek/scripts/user-space.ld).
*/
MEMORY

4
configs/sam3u-ek/scripts/kernel.ld → configs/sam3u-ek/scripts/user-space.ld
View File

@ -1,5 +1,5 @@
/****************************************************************************
* configs/sam3u-ek/scripts/kernel.ld
* configs/sam3u-ek/scripts/user-space.ld
*
* Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
@ -42,7 +42,7 @@
*
* For MPU support, the kernel-mode NuttX section is assumed to be 64Kb of
* FLASH and 4Kb of SRAM. That, of course, can be optimized as needed (See
* also configs/sam3u-ek/knsh/ld.script
* also configs/sam3u-ek/scripts/kernel-space.ld).
*/
MEMORY