boards/README.txt: Update for changes to the organization of the boards/ directory.
This commit is contained in:
Gregory Nutt
parent
f32c72f0e5
commit
4383ef6787
@ -29,7 +29,7 @@ Board-Specific Configurations
|
||||
The NuttX configuration consists of:
|
||||
|
||||
o Processor architecture specific files. These are the files contained
|
||||
in the arch/<arch-name>/ directory.
|
||||
in the arch/<arch>/ directory.
|
||||
|
||||
o Chip/SoC specific files. Each processor architecture is embedded
|
||||
in a chip or System-on-a-Chip (SoC) architecture. The full chip
|
||||
@ -38,7 +38,7 @@ o Chip/SoC specific files. Each processor architecture is embedded
|
||||
internal peripherals (such as UARTs, USB, etc.).
|
||||
|
||||
These chip-specific files are contained within chip-specific
|
||||
sub-directories in the arch/<arch-name>/ directory and are selected
|
||||
sub-directories in the arch/<arch>/ directory and are selected
|
||||
via the CONFIG_ARCH_name selection
|
||||
|
||||
o Board specific files. In order to be usable, the chip must be
|
||||
@ -47,9 +47,10 @@ o Board specific files. In order to be usable, the chip must be
|
||||
peripheral LEDs, external peripherals (such as network, USB, etc.).
|
||||
|
||||
These board-specific configuration files can be found in the
|
||||
boards/<board-name>/ sub-directories and are discussed in this
|
||||
README. Additional configuration information may be available in
|
||||
board-specific boards/<board-name>/README.txt files.
|
||||
boards/<arch>/<chip>/<board>/ sub-directories and are
|
||||
discussed in this README. Additional configuration information may be
|
||||
available in board-specific README files at
|
||||
boards/<arch>/<chip>/<board>/README.txt files.
|
||||
|
||||
The boards/ subdirectory contains configuration data for each board. These
|
||||
board-specific configurations plus the architecture-specific configurations in
|
||||
@ -59,11 +60,11 @@ Directory Structure
|
||||
^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
The boards/ directory contains board specific configuration logic. Each
|
||||
board must provide a subdirectory <board-name> under boards/ with the
|
||||
board must provide a subdirectory <board> under boards/ with the
|
||||
following characteristics:
|
||||
|
||||
|
||||
<board-name>
|
||||
<board>
|
||||
|-- README.txt
|
||||
|-- include/
|
||||
| `-- (board-specific header files)
|
||||
@ -87,11 +88,11 @@ README.txt -- This text file provides additional information unique to
|
||||
include/ -- This directory contains board specific header files. This
|
||||
directory will be linked as include/arch/board at configuration time and
|
||||
can be included via '#include <arch/board/header.h>'. These header file
|
||||
can only be included by files in arch/<arch-name>include/ and
|
||||
arch/<arch-name>/src
|
||||
can only be included by files in arch/<arch>include/ and
|
||||
arch/<arch>/src
|
||||
|
||||
src/ -- This directory contains board specific drivers. This
|
||||
directory will be linked as arch/<arch-name>/src/board at configuration
|
||||
directory will be linked as arch/<arch>/src/board at configuration
|
||||
time and will be integrated into the build system.
|
||||
|
||||
src/Makefile -- This makefile will be invoked to build the board specific
|
||||
@ -166,16 +167,16 @@ http://nuttx.org/Documentation/NuttXConfigVariables.html.
|
||||
Supported Boards
|
||||
^^^^^^^^^^^^^^^^
|
||||
|
||||
boards/amber
|
||||
boards/avr/atmeta/amber
|
||||
This is placeholder for the SoC Robotics Amber Web Server that is based
|
||||
on the Atmel AVR ATMega128 MCU. There is not much there yet and what is
|
||||
there is untested due to tool-related issues.
|
||||
|
||||
boards/arduino-due
|
||||
boards/arm/sam34/arduino-due
|
||||
This sub-directory holds board support for the Arduino DUE board featuring
|
||||
the Atmel ATSAM3X8E MCU running at 84 MHz.
|
||||
|
||||
boards/avr32dev1
|
||||
boards/avr/at32uc3/avr32dev1
|
||||
This is a port of NuttX to the Atmel AVR32DEV1 board. That board is
|
||||
based on the Atmel AT32UC3B0256 MCU and uses a specially patched
|
||||
version of the GNU toolchain: The patches provide support for the
|
||||
@ -183,77 +184,77 @@ boards/avr32dev1
|
||||
Atmel website. STATUS: This port is functional but very basic. There
|
||||
are configurations for NSH and the OS test.
|
||||
|
||||
boards/axoloti
|
||||
boards/arm/stm32/axoloti
|
||||
Support for the Axoloti synthesizer board based on the STMicro
|
||||
STM32F427IGH6 MCU. See: http://www.axoloti.com/
|
||||
|
||||
boards/b-l072z-lrwan1
|
||||
boards/arm/stm32f0l0g0/b-l072z-lrwan1
|
||||
STMicro STM32L0 Discovery kit with LoRa/SigFox based on STM32L072CZ MCU.
|
||||
|
||||
boards/bambino-200e
|
||||
boards/arm/lpc43xx/bambino-200e
|
||||
Micromint Bambino board. This board is based on the LPC4330FBD144.
|
||||
|
||||
boards/c5471evm
|
||||
boards/arm/c5471/c5471evm
|
||||
This is a port to the Spectrum Digital C5471 evaluation board. The
|
||||
TMS320C5471 is a dual core processor from TI with an ARM7TDMI general
|
||||
purpose processor and a c54 DSP. It is also known as TMS320DA180 or just DA180.
|
||||
NuttX runs on the ARM core and is built with a GNU arm-nuttx-elf toolchain*.
|
||||
This port is complete and verified.
|
||||
|
||||
boards/launchxl_cc1310
|
||||
boards/arm/tiva/launchxl_cc1310
|
||||
Port to the TI SimpleLink CC1310 LaunchPad Evaluation Kit (LAUNCHXL-CC1310)
|
||||
featuring the SimpleLinkCC1310 chip. This board features the CC1310F128
|
||||
part with 128Kb of FLASH and 20Kb of SRAM.
|
||||
|
||||
boards/launchxl_cc1312r1
|
||||
boards/arm/tiva/launchxl_cc1312r1
|
||||
Port to the TI SimpleLink CC1312R1 LaunchPad Evaluation Kit (LAUNCHXL-CC1312R1)
|
||||
featuring the SimpleLinkCC1312R1 chip.
|
||||
|
||||
boards/clicker2-stm32
|
||||
boards/arm/stm32/clicker2-stm32
|
||||
Mikroe Clicker2 STM32 board based on the STMicro STM32F407VGT6 MCU.
|
||||
|
||||
boards/cloudctrl
|
||||
boards/arm/stm32/cloudctrl
|
||||
Darcy's CloudController board. This is a small network relay development
|
||||
board. Based on the Shenzhou IV development board design. It is based on
|
||||
the STM32F107VC MCU.
|
||||
|
||||
boards/demo9s12ne64
|
||||
boards/hc/mcs92s12ne64/demo9s12ne64
|
||||
NXP/FreeScale DMO9S12NE64 board based on the MC9S12NE64 hcs12 cpu. This
|
||||
port uses the m9s12x GCC toolchain. STATUS: (Still) under development; it
|
||||
is code complete but has not yet been verified.
|
||||
|
||||
boards/dk-tm4c129x
|
||||
boards/arm/tiva/dk-tm4c129x
|
||||
This is the port of NuttX to the Tiva® DK-TM4C129x Connected Development Kit. The
|
||||
Tiva® DK-TM4C129x features the TM4C129XNCZAD MCU.
|
||||
|
||||
boards/ea3131
|
||||
boards/arm/lpc31xx/ea3131
|
||||
Embedded Artists EA3131 Development board. This board is based on the
|
||||
an NXP LPC3131 MCU. This OS is built with the arm-nuttx-elf toolchain*.
|
||||
STATUS: This port is complete and mature.
|
||||
|
||||
boards/ea3152
|
||||
boards/arm/lpc31xx/ea3152
|
||||
Embedded Artists EA3152 Development board. This board is based on the
|
||||
an NXP LPC3152 MCU. This OS is built with the arm-nuttx-elf toolchain*.
|
||||
STATUS: This port is has not be exercised well, but since it is
|
||||
a simple derivative of the ea3131, it should be fully functional.
|
||||
|
||||
boards/eagle100
|
||||
boards/arm/tiva/eagle100
|
||||
Micromint Eagle-100 Development board. This board is based on the
|
||||
an ARM Cortex-M3 MCU, the Luminary LM3S6918. This OS is built with the
|
||||
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
|
||||
|
||||
boards/efm32-g8xx-stk
|
||||
boards/arm/efm32/efm32-g8xx-stk
|
||||
The port of NuttX to the EFM32 Gecko Starter Kit (EFM32-G8XX-STK).
|
||||
|
||||
boards/efm32gg-stk3700
|
||||
boards/arm/efm32/efm32gg-stk3700
|
||||
The port of NuttX to the EFM32 Giant Gecko Starter Kit
|
||||
(EFM32GG-STK3700).
|
||||
|
||||
boards/ekk-lm3s9b96
|
||||
boards/arm/tiva/ekk-lm3s9b96
|
||||
TI/Stellaris EKK-LM3S9B96 board. This board is based on the
|
||||
an EKK-LM3S9B96 which is a Cortex-M3.
|
||||
|
||||
boards/esp-core
|
||||
boards/xtensa/esp32/esp-core
|
||||
The ESP32 is a dual-core system from Expressif with two Harvard
|
||||
architecture Xtensa LX6 CPUs. All embedded memory, external memory and
|
||||
nd peripherals are located on the data bus and/or the instruction bus of
|
||||
@ -261,179 +262,179 @@ boards/esp-core
|
||||
CPUs is symmetric, meaning they use the same addresses to access the same
|
||||
memory.
|
||||
|
||||
boards/ez80f0910200kitg
|
||||
boards/z80/ez80/ez80f0910200kitg
|
||||
ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200kitg
|
||||
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
||||
tools. The development environment is Cygwin under WinXP.
|
||||
|
||||
boards/ez80f0910200zco
|
||||
boards/z80/ez80/ez80f0910200zco
|
||||
ez80Acclaim! Microcontroller. This port use the Zilog ez80f0910200zco
|
||||
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
|
||||
tools. The development environment is Cygwin under WinXP.
|
||||
|
||||
boards/fire-stm32v2
|
||||
boards/arm/stm32/fire-stm32v2
|
||||
A configuration for the M3 Wildfire STM32 board. This board is based on the
|
||||
STM32F103VET6 chip. See http://firestm32.taobao.com . Version 2 and 3 of
|
||||
the boards are supported but only version 2 has been tested.
|
||||
|
||||
boards/flipnclick-pic32mz
|
||||
boards/mips/pic32mz/flipnclick-pic32mz
|
||||
Board support for the Mikroe Flip&Click PIC32MZ board. This board is an
|
||||
chipKit Arduino-compatible board (but can also be used with the Mikroe
|
||||
bootloader). It has with four Mikroe Click bus interfaces in addition to
|
||||
standard Arduino connectors. This board features the Microchip
|
||||
PIC32MZ2048EFH100 MCU running at 200 MHz (252Mhz capable).
|
||||
|
||||
boards/flipnclick-sam3x
|
||||
boards/arm/sam34/flipnclick-sam3x
|
||||
Board support for the Mikroe Flip&Click STM32X board. This board is an
|
||||
Arduino-Due work-alike with four Mikroe Click bus interfaces. Like the
|
||||
Arduino DUE, this board features the Atmel ATSAM3X8E MCU running at 84
|
||||
MHz.
|
||||
|
||||
boards/freedom-k28f
|
||||
boards/arm/kinetis/freedom-k28f
|
||||
This port uses the NXP/FreeScale FREEDOM-K28F development board. This
|
||||
board uses the Kinetis K28F MK28FN2M0VMI15 Cortex-M4 MCU.
|
||||
|
||||
boards/freedom-k64f
|
||||
boards/arm/kinetis/freedom-k64f
|
||||
This port uses the NXP/FreeScale FREEDOM-K64F development board. This board
|
||||
uses the Kinetis K64 MK64FN1M0VLL12 Cortex-M4 MCU.
|
||||
|
||||
boards/freedom-kl25z
|
||||
boards/freedom-kl26z
|
||||
boards/arm/kl/freedom-kl25z
|
||||
boards/arm/kl/freedom-kl26z
|
||||
These configurations are for the NXP/FreeScale Freedom KL25Z and very similar
|
||||
KL26Z board. The Freedom-KL25Z features the K25Z120LE3AN chip; the
|
||||
Freedom-KL26Z has the K26Z128VLH4 chip. These are separate configurations
|
||||
because of minor differences in the on-board logic. Both include a
|
||||
built-in SDA debugger.
|
||||
|
||||
boards/hymini-stm32v
|
||||
boards/arm/stm32/hymini-stm32v
|
||||
A configuration for the HY-Mini STM32v board. This board is based on the
|
||||
STM32F103VCT chip.
|
||||
|
||||
boards/kwikstik-k40.
|
||||
boards/arm/kinetis/kwikstik-k40.
|
||||
Kinetis K40 Cortex-M4 MCU. This port uses the NXP/FreeScale KwikStik-K40
|
||||
development board.
|
||||
|
||||
boards/launchxl-tms57004
|
||||
boards/arm/tms570/launchxl-tms57004
|
||||
TI Hercules TMS570LS04x/03x LaunchPad Evaluation Kit (LAUNCHXL-TMS57004)
|
||||
featuring the Hercules TMS570LS0432PZ chip.
|
||||
|
||||
boards/lincoln60
|
||||
boards/arm/lpc17xx_40xx/lincoln60
|
||||
NuttX port to the Micromint Lincoln 60 board.
|
||||
|
||||
boards/lm3s6432-s2e
|
||||
boards/arm/tiva/lm3s6432-s2e
|
||||
Stellaris RDK-S2E Reference Design Kit and the MDL-S2E Ethernet to
|
||||
Serial module.
|
||||
|
||||
boards/lm3s6965-ek
|
||||
boards/arm/tiva/lm3s6965-ek
|
||||
Stellaris LM3S6965 Evaluation Kit. This board is based on the
|
||||
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
|
||||
arm-nuttx-elf toolchain*. STATUS: This port is complete and mature.
|
||||
|
||||
boards/lm3s8962-ek
|
||||
boards/arm/tiva/lm3s8962-ek
|
||||
Stellaris LMS38962 Evaluation Kit.
|
||||
|
||||
boards/lm4f120-launchpad
|
||||
boards/arm/tiva/lm4f120-launchpad
|
||||
This is the port of NuttX to the Stellaris LM4F120 LaunchPad. The
|
||||
Stellaris® LM4F120 LaunchPad Evaluation Board is a low-cost evaluation
|
||||
platform for ARM® Cortex™-M4F-based microcontrollers from Texas
|
||||
Instruments.
|
||||
|
||||
boards/lpcxpresso-lpc1768
|
||||
boards/arm/lpc17xx_40xx/lpcxpresso-lpc1768
|
||||
Embedded Artists base board with NXP LPCExpresso LPC1768. This board
|
||||
is based on the NXP LPC1768. The Code Red toolchain is used by default.
|
||||
STATUS: Under development.
|
||||
|
||||
boards/lpcxpresso-lpc54628
|
||||
boards/arm/lpc54xx/lpcxpresso-lpc54628
|
||||
NXP LPCExpresso LPC54628. This board is based on the NXP LPC54628.
|
||||
|
||||
boards/lpc4330-xplorer
|
||||
boards/arm/lpc43xx/lpc4330-xplorer
|
||||
NuttX port to the LPC4330-Xplorer board from NGX Technologies featuring
|
||||
the NXP LPC4330FET100 MCU
|
||||
|
||||
boards/lpc4337-ws
|
||||
boards/arm/lpc43xx/lpc4337-ws
|
||||
NuttX port to the WaveShare LPC4337-ws board featuring the NXP LPC4337JBD144
|
||||
MCU.
|
||||
|
||||
boards/lpc4357-evb
|
||||
boards/arm/lpc43xx/lpc4357-evb
|
||||
NuttX port to the LPC4357-EVB board from Embest featuring the NXP
|
||||
LPC4357FET256 MCU. Based on the LPC4300 Xplorer port and provided by
|
||||
Toby Duckworth.
|
||||
|
||||
boards/lpc4370-link2
|
||||
boards/arm/lpc43xx/lpc4370-link2
|
||||
NuttX port to the NXP LPC4370-Link2 development board featuring the NXP
|
||||
LPC4370FET100 MCU. Based on the LPC4300 Xplorer port and provided by
|
||||
Lok Tep.
|
||||
|
||||
boards/makerlisp
|
||||
boards/z80/ez80/makerlisp
|
||||
This port use the MakerLips machine based on an eZ80F091 ez80Acclaim!
|
||||
Microcontroller, and the Zilog ZDS-II Windows command line tools. The
|
||||
development environment is Cygwin under Windows. A Windows native
|
||||
development environment is available but has not been verified.
|
||||
|
||||
boards/maple
|
||||
boards/arm/stm32/maple
|
||||
NuttX support for the LeafLab's Maple and Maple Mini boards. These boards
|
||||
are based on the STM32F103RBT6 chip for the standard version and on the
|
||||
STM32F103CBT6 for the mini version (See http://leaflabs.com/docs/hardware/maple.html)
|
||||
|
||||
boards/max32660-evsys
|
||||
boards/arm/max326xx/max32660-evsys
|
||||
The configurations in this directory support the Maxim Integrated
|
||||
MAX32660-EVSYS board.
|
||||
|
||||
boards/mbed
|
||||
boards/arm/lpc17xx_40xx/mbed
|
||||
The configurations in this directory support the mbed board (http://mbed.org)
|
||||
that features the NXP LPC1768 microcontroller. This OS is also built
|
||||
with the arm-nuttx-elf toolchain*. STATUS: Contributed.
|
||||
|
||||
boards/mcb1700
|
||||
boards/arm/lpc17xx_40xx/mcb1700
|
||||
Board support for the Keil MCB1700
|
||||
|
||||
boards/metro-m4
|
||||
boards/arm/samd5e5/metro-m4
|
||||
Th configurations in this directory are part of the port of NuttX to the
|
||||
Adafruit Metro M4. The Metro M4 uses a Arduino form factor and and pinout.
|
||||
It's powered with an ATSAMD51J19
|
||||
|
||||
boards/mikroe-stm32f4
|
||||
boards/arm/stm32/mikroe-stm32f4
|
||||
This is the port of NuttX to the MikroElektronika Mikromedia for STM32F4
|
||||
development board. Contributed by Ken Petit.
|
||||
|
||||
boards/misoc
|
||||
boards/misoc/lm32/misoc
|
||||
This directory holds the port to NuttX running on a Qemu LM32 system.
|
||||
You can find the Qemu setup at https://bitbucket.org/key2/qemu
|
||||
|
||||
boards/mcu123-lpc214x
|
||||
boards/arm/lpc214x/mcu123-lpc214x
|
||||
This port is for the NXP LPC2148 as provided on the mcu123.com
|
||||
lpc214x development board. This OS is also built with the arm-nuttx-elf
|
||||
toolchain*. The port supports serial, timer0, spi, and usb.
|
||||
|
||||
boards/micropendous3
|
||||
boards/avr/at90usb/micropendous3
|
||||
This is a port to the Opendous Micropendous 3 board. This board may
|
||||
be populated with either an AVR AT90USB646, 647, 1286, or 1287 MCU.
|
||||
Support is configured for the AT90USB647.
|
||||
|
||||
boards/mirtoo
|
||||
boards/mips/pic32mx/mirtoo
|
||||
This is the port to the DTX1-4000L "Mirtoo" module. This module uses MicroChip
|
||||
PIC32MX250F128D. See http://www.dimitech.com/ for further information.
|
||||
|
||||
boards/moteino-mega
|
||||
boards/avr/atmega/moteino-mega
|
||||
This is placeholder for the LowPowerLab MoteinoMEGA that is based
|
||||
on the Atmel AVR ATMega1284P MCU. There is not much there yet and what is
|
||||
there is untested due to tool-related issues.
|
||||
|
||||
boards/moxa
|
||||
boards/arm/moxart/moxa
|
||||
Moxa NP51x0 series of 2-port advanced RS-232/422/485 serial device servers.
|
||||
|
||||
boards/ne64badge
|
||||
boards/hc/mcs92s12ne6/ne64badge
|
||||
Future Electronics Group NE64 /PoE Badge board based on the
|
||||
MC9S12NE64 hcs12 cpu. This port uses the m9s12x GCC toolchain.
|
||||
STATUS: Under development. The port is code-complete but has
|
||||
not yet been fully tested.
|
||||
|
||||
boards/nrf52-generic
|
||||
boards/arm/nrf52/nrf52-generic
|
||||
NuttX port to the a generic NRF52. Support is in place for the NRF
|
||||
PCA10040 board from Nordic Semiconductor or for the Adafruit NRF52
|
||||
feather, both featuring the NRF52832 MCU.
|
||||
|
||||
boards/ntosd-dm320
|
||||
boards/arm/dm320/ntosd-dm320
|
||||
This port uses the Neuros OSD v1.0 Dev Board with a GNU arm-nuttx-elf
|
||||
toolchain*: see
|
||||
|
||||
@ -448,7 +449,7 @@ boards/ntosd-dm320
|
||||
STATUS: This port is code complete, verified, and included in the
|
||||
NuttX 0.2.1 release.
|
||||
|
||||
boards/nucleo-144
|
||||
boards/arm/stm32f7/nucleo-144
|
||||
STMicro Nucleo-144 development board family. Included support for (1) the
|
||||
Nucleo-F767ZG board featuring the STM32F746ZGT6U MCU. The STM32F746ZGT6U
|
||||
is a 216MHz Cortex-M7 operation with 1024Kb Flash memory and 320Kb SRAM.
|
||||
@ -456,92 +457,92 @@ boards/nucleo-144
|
||||
STM32F767ZIT6 is a 216MHz Cortex-M7 operation with 2048Kb Flash memory
|
||||
and 512Kb SRAM.
|
||||
|
||||
boards/nucleo-f072rb
|
||||
boards/arm/stm32f0l0g0/nucleo-f072rb
|
||||
STMicro Nucleo F072RB board based on the STMicro STM32F072RBT6 MCU.
|
||||
|
||||
boards/nucleo-f4x1re
|
||||
boards/arm/stm32/nucleo-f4x1re
|
||||
STMicro ST Nucleo F401RE and F411RE boards. See
|
||||
http://mbed.org/platforms/ST-Nucleo-F401RE and
|
||||
http://developer.mbed.org/platforms/ST-Nucleo-F411RE for more
|
||||
information about these boards.
|
||||
|
||||
boards/nucleo-f410rb
|
||||
boards/arm/stm32/nucleo-f410rb
|
||||
NuttX configuration for the STMicro NucleoF410RB board from ST Micro.
|
||||
This board features the STM32F410RB 100MHz Cortex-M4 with 128 KB Flash
|
||||
and 32 KB SRAM.
|
||||
|
||||
boards/nucleo-f303re
|
||||
boards/arm/stm32/nucleo-f303re
|
||||
STMicro ST Nucleo F303RE board. Contributed by Paul Alexander Patience.
|
||||
|
||||
boards/nucleo-l073rz
|
||||
boards/arm/stm32f0l0g0/nucleo-l073rz
|
||||
STMicro STM32L0 Discovery kit with LoRa/SigFox based on STM32L072CZ MCU.
|
||||
|
||||
boards/nutiny-nuc120
|
||||
boards/arm/nuc1xx/nutiny-nuc120
|
||||
This is the port of NuttX to the NuvoTon NuTiny-SDK-NUC120 board. This
|
||||
board has the NUC120LE3AN chip with a built-in NuLink debugger.
|
||||
|
||||
boards/olimex-efm32g880f128-stk
|
||||
boards/arm/efm32/olimex-efm32g880f128-stk
|
||||
This is the port of NuttX to the Olimex EFM32G880F128-STK development
|
||||
board.
|
||||
|
||||
boards/olimex-lpc1766stk
|
||||
boards/arm/lpc17xx_40xx/olimex-lpc1766stk
|
||||
This port uses the Olimex LPC1766-STK board and a GNU GCC toolchain* under
|
||||
Linux or Cygwin. STATUS: Complete and mature.
|
||||
|
||||
boards/olimex-lpc2378
|
||||
boards/arm/lpc2378/olimex-lpc2378
|
||||
This port uses the Olimex-lpc2378 board and a GNU arm-nuttx-elf toolchain* under
|
||||
Linux or Cygwin. STATUS: ostest and NSH configurations available.
|
||||
This port for the NXP LPC2378 was contributed by Rommel Marcelo.
|
||||
|
||||
boards/olimex-stm32-h405
|
||||
boards/arm/stm32/olimex-stm32-h405
|
||||
This port uses the Olimex STM32 H405 board and a GNU arm-nuttx-elf
|
||||
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
|
||||
further information. This board features the STMicro STM32F405RGT6 MCU.
|
||||
Contributed by Martin Lederhilger.
|
||||
|
||||
boards/olimex-stm32-h407
|
||||
boards/arm/stm32/olimex-stm32-h407
|
||||
This port uses the Olimex STM32 H407 board and a GNU arm-nuttx-elf
|
||||
toolchain* under Linux or Cygwin. See the http://www.olimex.com for
|
||||
further information. This board features the STMicro STM32F407ZGT6 (144
|
||||
pins). Contributed by Neil Hancock.
|
||||
|
||||
boards/olimex-stm32-e407
|
||||
boards/arm/stm32/olimex-stm32-e407
|
||||
Olimex STM32 E407 board based on the STMicro STM32F407ZGT6 (144pins).
|
||||
Contributed by Mateusz Szafoni.
|
||||
|
||||
boards/olimex-stm32-p107
|
||||
boards/arm/stm32/olimex-stm32-p107
|
||||
This port uses the Olimex STM32-P107 board (STM32F107VC) and a GNU arm-nuttx-elf
|
||||
toolchain* under Linux or Cygwin. See the https://www.olimex.com/dev/stm32-p107.html
|
||||
for further information. Contributed by Max Holtzberg.
|
||||
|
||||
boards/olimex-stm32-p207
|
||||
boards/arm/stm32/olimex-stm32-p207
|
||||
This port uses the Olimex STM32-P207 board (STM32F207ZE) and a GNU arm-nuttx-elf
|
||||
toolchain under Linux or Cygwin. See the https://www.olimex.com/dev/stm32-p207.html
|
||||
for further information. Contributed by Martin Lederhilger.
|
||||
|
||||
boards/olimex-stm32-p407
|
||||
boards/arm/stm32/olimex-stm32-p407
|
||||
This port uses the Olimex STM32-P407 board (STM32F407ZG) and a GNU arm-nuttx-elf
|
||||
toolchain under Linux or Cygwin. See the https://www.olimex.com/dev/stm32-p407.html
|
||||
for further information.
|
||||
|
||||
boards/olimexino-stm32
|
||||
boards/arm/stm32/olimexino-stm32
|
||||
This port uses the Olimexino STM32 board (STM32F103RBT6) and a GNU arm-nuttx-elf
|
||||
toolchain* under Linux or Cygwin. See the http://www.olimex.com for further\
|
||||
information. Contributed by David Sidrane.
|
||||
|
||||
boards/olimex-strp711
|
||||
boards/arm/str71x/olimex-strp711
|
||||
This port uses the Olimex STR-P711 board and a GNU arm-nuttx-elf toolchain* under
|
||||
Linux or Cygwin. See the http://www.olimex.com/dev/str-p711.html" for
|
||||
further information. STATUS: Configurations for the basic OS test and NSH
|
||||
are complete and verified.
|
||||
|
||||
boards/omnibusf4
|
||||
boards/arm/stm32/omnibusf4
|
||||
Flight controllers compatible with the OMINBUSF4 Betaflight target
|
||||
|
||||
boards/or1k
|
||||
boards/or1k/mor1kx/or1k
|
||||
Generic OpenRISC board.
|
||||
|
||||
boards/pcduino-a10
|
||||
boards/arm/a1x/pcduino-a10
|
||||
This directory contains the port of NuttX to the pcDuino v1 board
|
||||
See http://www.pcduino.com/ for information about pcDuino Lite, v1,
|
||||
and v2. These boards are based around the Allwinner A10 Cortex-A8 CPU.
|
||||
@ -549,7 +550,7 @@ boards/pcduino-a10
|
||||
differences are cosmetic. This port was developed on the v1 board, but
|
||||
the others may be compatible.
|
||||
|
||||
boards/p112
|
||||
boards/z80/z180/p112
|
||||
The P112 is notable because it was the first of the hobbyist single board
|
||||
computers to reach the production stage. The P112 hobbyist computers
|
||||
were relatively widespread and inspired other hobbyist centered home brew
|
||||
@ -576,22 +577,22 @@ boards/p112
|
||||
Dave Brooks was successfully funded through Kickstarter for and another
|
||||
run of P112 boards in November of 2012.
|
||||
|
||||
boards/photon
|
||||
boards/arm/stm32/photon
|
||||
A configuration for the Photon Wifi board from Particle Devices
|
||||
(https://www.particle.io). This board features the STM32F205RGY6 MCU from
|
||||
STMicro.
|
||||
|
||||
boards/pic32mx-starterkit
|
||||
boards/mips/pic32mx/pic32mx-starterkit
|
||||
This directory contains the port of NuttX to the Microchip PIC32 Ethernet
|
||||
Starter Kit (DM320004) with the Multimedia Expansion Board (MEB, DM320005).
|
||||
See www.microchip.com for further information.
|
||||
|
||||
boards/pic32mx7mmb
|
||||
boards/mips/pic32mx/pic32mx7mmb
|
||||
This directory will (eventually) contain the port of NuttX to the
|
||||
Mikroelektronika PIC32MX7 Multimedia Board (MMB). See
|
||||
http://www.mikroe.com/ for further information.
|
||||
|
||||
boards/pic32mz-starterkit
|
||||
boards/mips/pic32mz/pic32mz-starterkit
|
||||
This directory contains the port of NuttX to the Microchip PIC32MZ
|
||||
Embedded Connectivity (EC) Starter Kit. There are two configurations of
|
||||
the starter kit:
|
||||
@ -603,30 +604,30 @@ boards/pic32mz-starterkit
|
||||
|
||||
See www.microchip.com for further information.
|
||||
|
||||
boards/pnev5180b
|
||||
boards/arm/lpc17xx_40xx/pnev5180b
|
||||
NXP Semiconductors' PN5180 NFC Frontend Development Kit. This board is
|
||||
based on the NXP LPC1769 MCU.
|
||||
|
||||
boards/qemu-i486
|
||||
boards/x86/qemu/qemu-i486
|
||||
Port of NuttX to QEMU in i486 mode. This port will also run on real i486
|
||||
hardwared (Google the Bifferboard).
|
||||
|
||||
boards/nr5m100-nexys4
|
||||
boards/risc-v/nr5m100/nr5m100-nexys4
|
||||
Port of NuttX to RISC-V platform on IQ-Analog NR5M100 RISC-V FPGA platform.
|
||||
|
||||
boards/arm/s32k1xx/s32k118evb
|
||||
This directory holds the port of NuttX to the NXP S32K118EVB board
|
||||
featuring the S32K118 Cortex-M0+.
|
||||
|
||||
boards/sabre-6quad
|
||||
boards/arm/imx6/sabre-6quad
|
||||
This directory holds a port of NuttX to the NXP/Freescale Sabre board
|
||||
featuring the iMX 6Quad CPU.
|
||||
|
||||
boards/sama5d2-xult
|
||||
boards/arm/sama5/sama5d2-xult
|
||||
This is the port of NuttX to the Atmel SAMA5D2-Xplained Ultra development
|
||||
board. This board features the Atmel SAMA5D27. See http://www.atmel.com.
|
||||
|
||||
boards/sama5d3x-ek
|
||||
boards/arm/sama5/sama5d3x-ek
|
||||
This is the port of NuttX to the Atmel SAMA5D3x-EK development boards
|
||||
(where x=1,3,4, or 5). These boards feature the Atmel SAMA5D3
|
||||
microprocessors. Four different SAMA5D3x-EK kits are available
|
||||
@ -641,146 +642,146 @@ boards/sama5d3x-ek
|
||||
are supported by NuttX with a simple reconfiguration of the processor
|
||||
type.
|
||||
|
||||
boards/sama5d3-xplained
|
||||
boards/arm/sama5/sama5d3-xplained
|
||||
This is the port of NuttX to the Atmel SAMA5D3x-Xplained development board.
|
||||
This board features the Atmel SAMA5D36. See
|
||||
http://www.atmel.com/devices/sama5d36.aspx.
|
||||
|
||||
boards/sama5d4-ek
|
||||
boards/arm/sama5/sama5d4-ek
|
||||
This is the port of NuttX to the Atmel SAMA5D4-EK development board.
|
||||
This board features the Atmel SAMA5D44. See http://www.atmel.com.
|
||||
|
||||
boards/samd20-xplained
|
||||
boards/arm/samd2l2/samd20-xplained
|
||||
The port of NuttX to the Atmel SAMD20-Xplained Pro development board. This
|
||||
board features the ATSAMD20J18A MCU (Cortex-M0+ with 256KB of FLASH and
|
||||
32KB of SRAM).
|
||||
|
||||
boards/samd21-xplained
|
||||
boards/arm/samd2l2/samd21-xplained
|
||||
The port of NuttX to the Atmel SAMD21-Xplained Pro development board. This
|
||||
board features the ATSAMD21J18A MCU (Cortex-M0+ with 256KB of FLASH and
|
||||
32KB of SRAM).
|
||||
|
||||
boards/sam3u-ek
|
||||
boards/arm/sam34/sam3u-ek
|
||||
The port of NuttX to the Atmel SAM3U-EK development board.
|
||||
|
||||
boards/sam4cmp-db
|
||||
boards/arm/sam34/sam4cmp-db
|
||||
The port of NuttX to the Atmel SAM4CMP-DB development board.
|
||||
|
||||
boards/sam4e-ek
|
||||
boards/arm/sam34/sam4e-ek
|
||||
The port of NuttX to the Atmel SAM4E-EK development board. This board
|
||||
features the SAM4E16 MCU running at up to 120MHz.
|
||||
|
||||
boards/sam4l-xplained
|
||||
boards/arm/sam34/sam4l-xplained
|
||||
The port of NuttX to the Atmel SAM4L-Xplained development board.
|
||||
|
||||
boards/sam4s-xplained
|
||||
boards/arm/sam34/sam4s-xplained
|
||||
The port of NuttX to the Atmel SAM4S-Xplained development board.
|
||||
|
||||
boards/sam4s-xplained-pro
|
||||
boards/arm/sam34/sam4s-xplained-pro
|
||||
The port of NuttX to the Atmel SAM4S-Xplained Pro development board.
|
||||
|
||||
boards/same70-xplained
|
||||
boards/arm/samv7/same70-xplained
|
||||
The port of NuttX to the Atmel SAME70 Xplained evaluation board.
|
||||
|
||||
boards/samv71-xult
|
||||
boards/arm/samv7/samv71-xult
|
||||
The port of NuttX to the Atmel SAMV71 Xplained Ultra evaluation board.
|
||||
|
||||
boards/sim
|
||||
boards/sim/sim/sim
|
||||
A user-mode port of NuttX to the x86 Linux platform is available.
|
||||
The purpose of this port is primarily to support OS feature development.
|
||||
This port does not support interrupts or a real timer (and hence no
|
||||
round robin scheduler) Otherwise, it is complete.
|
||||
|
||||
boards/shenzhou
|
||||
boards/arm/stm32/shenzhou
|
||||
This is the port of NuttX to the Shenzhou development board from
|
||||
www.armjishu.com. This board features the STMicro STM32F107VCT MCU.
|
||||
|
||||
boards/skp16c26
|
||||
boards/renesas/m32262f8/skp16c26
|
||||
Renesas M16C processor on the Renesas SKP16C26 StarterKit. This port
|
||||
uses the GNU m32c toolchain. STATUS: The port is complete but untested
|
||||
due to issues with compiler internal errors.
|
||||
|
||||
boards/stm3210e-eval
|
||||
boards/arm/stm32/stm3210e-eval
|
||||
STMicro STM3210E-EVAL development board based on the STMicro STM32F103ZET6
|
||||
microcontroller (ARM Cortex-M3). This port uses the GNU Cortex-M3
|
||||
toolchain.
|
||||
|
||||
boards/stm3220g-eval
|
||||
boards/arm/stm32/stm3220g-eval
|
||||
STMicro STM3220G-EVAL development board based on the STMicro STM32F407IG
|
||||
microcontroller (ARM Cortex-M3).
|
||||
|
||||
boards/stm3240g-eval
|
||||
boards/arm/stm32/stm3240g-eval
|
||||
STMicro STM3240G-EVAL development board based on the STMicro STM32F103ZET6
|
||||
microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4
|
||||
toolchain (such as CodeSourcery).
|
||||
|
||||
boards/stm32butterfly2
|
||||
boards/arm/stm32/stm32butterfly2
|
||||
Kamami stm32butterfly2 development board with optional ETH phy. See
|
||||
https://kamami.pl/zestawy-uruchomieniowe-stm32/178507-stm32butterfly2.html
|
||||
|
||||
boards/stm32f051-discovery
|
||||
boards/arm/stm32/stm32f051-discovery
|
||||
STMicro STM32F051-Discovery board based on the STMicro ARCH_CHIP_STM32F051R8
|
||||
MCU.
|
||||
|
||||
boards/stm32f072-discovery
|
||||
boards/arm/stm32/stm32f072-discovery
|
||||
STMicro STM32F072-Discovery board based on the STMicro ARCH_CHIP_STM32F072RB
|
||||
MCU.
|
||||
|
||||
boards/stm32f103-minimum
|
||||
boards/arm/stm32/stm32f103-minimum
|
||||
Generic STM32F103C8T6 Minimum ARM Development Board.
|
||||
|
||||
boards/stm32f4discovery
|
||||
boards/arm/stm32/stm32f4discovery
|
||||
STMicro STM32F4-Discovery board based on the STMIcro STM32F407VGT6 MCU.
|
||||
|
||||
boards/stm32f411e-disco
|
||||
boards/arm/stm32/stm32f411e-disco
|
||||
This is a minimal configuration that supports low-level test of the
|
||||
STMicro STM32F411E-Discovery Board.
|
||||
|
||||
boards/stm32f429i-disco
|
||||
boards/arm/stm32/stm32f429i-disco
|
||||
STMicro STM32F429I-Discovery board based on the STMicro STM32F429ZIT6 MCU.
|
||||
|
||||
boards/stm32f746g-disco
|
||||
boards/arm/stm32f7/stm32f746g-disco
|
||||
STMicro STM32F746G-DISCO development board featuring the STM32F746NGH6
|
||||
MCU. The STM32F746NGH6 is a 216MHz Cortex-M7 operation with 1024Kb Flash
|
||||
memory and 300Kb SRAM.
|
||||
|
||||
boards/stm32f746g-ws
|
||||
boards/arm/stm32f7/stm32f746g-ws
|
||||
Waveshare STM32F746 development board featuring the STM32F746IG MCU.
|
||||
|
||||
boards/stm32l476-mdk
|
||||
boards/arm/stm32l4/stm32l476-mdk
|
||||
Motorola Mods Development Board (MDK) features STM32L476ME MCU.
|
||||
The STM32L476ME is a Cortex-M4 optimised for low-power operation
|
||||
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
|
||||
|
||||
boards/stm32f769i-disco
|
||||
boards/arm/stm32f7/stm32f769i-disco
|
||||
NuttX configurations for the STMicro STM32F769I-DISCO development board
|
||||
featuring the STM32F769NIH6 MCU. The STM32F769NIH6 is a 216MHz Cortex-M7
|
||||
operating with 2048K Flash memory and 512Kb SRAM.
|
||||
|
||||
boards/stm32l476vg-disco
|
||||
boards/arm/stm32l4/stm32l476vg-disco
|
||||
STMicro STM32L476VG_DISCO development board featuring the STM32L476VG
|
||||
MCU. The STM32L476VG is a Cortex-M4 optimised for low-power operation
|
||||
at up to 80MHz operation with 1024Kb Flash memory and 96+32Kb SRAM.
|
||||
|
||||
boards/stm32ldiscovery
|
||||
boards/arm/stm32/stm32ldiscovery
|
||||
STMicro STM32L-Discovery board based on the STMicro STM32L152RB MCU.
|
||||
|
||||
boards/stm32vldiscovery
|
||||
boards/arm/stm32/stm32vldiscovery
|
||||
STMicro STM32VL-Discovery board based on the STMicro STM32F100RB MCU.
|
||||
|
||||
boards/sure-pic32mx
|
||||
boards/mips/pic32mx/sure-pic32mx
|
||||
The "Advanced USB Storage Demo Board," Model DB-DP11215, from Sure
|
||||
Electronics (http://www.sureelectronics.net/). This board features
|
||||
the MicroChip PIC32MX440F512H. See also
|
||||
http://www.sureelectronics.net/goods.php?id=1168 for further
|
||||
information about the Sure DB-DP11215 board.
|
||||
|
||||
boards/teensy-2.0
|
||||
boards/avr/at90usb/teensy-2.0
|
||||
This is the port of NuttX to the PJRC Teensy++ 2.0 board. This board is
|
||||
developed by http://pjrc.com/teensy/. The Teensy++ 2.0 is based
|
||||
on an Atmel AT90USB1286 MCU.
|
||||
|
||||
boards/teensy-3.x
|
||||
boards/arm/kinetis/teensy-3.x
|
||||
This is the port of NuttX to the Teensy-3.1 from PJRC
|
||||
(https://www.pjrc.com/). The Teensy-3.1 features the Freescale
|
||||
MK30DX256VLH7 chip (now NXP). The MK30DX256VLH7 is a 64-pin Cortex-M4
|
||||
@ -795,48 +796,47 @@ boards/teensy-3.x
|
||||
Teensy-3.0). the primary difference is that the Teensy 3.0 has a
|
||||
MK30DX128VLH5 with slightly less capability.
|
||||
|
||||
boards/teensy-lc
|
||||
boards/arm/kl/teensy-lc
|
||||
This is the port of nuttx for the Teensy LC board. The Teensy LC
|
||||
is a DIP style breakout board for the MKL25Z64 and comes with a USB
|
||||
based bootloader.
|
||||
|
||||
boards/tm4c123g-launchpad
|
||||
boards/arm/tiva/tm4c123g-launchpad
|
||||
This is the port of NuttX to the Tiva® TM4C123G LaunchPad. The
|
||||
Tiva® TM4C123G LaunchPad Evaluation Board is a low-cost evaluation
|
||||
platform for ARM® Cortex™-M4F-based microcontrollers from Texas
|
||||
Instruments.
|
||||
|
||||
boards/tm4c1294-launchpad
|
||||
boards/arm/tiva/tm4c1294-launchpad
|
||||
This is the port of NuttX to the Tiva® TM4C1294 LaunchPad. The
|
||||
Tiva® TM4C123G LaunchPad Evaluation Board is a low-cost evaluation
|
||||
platform for ARM® Cortex™-M4F-based microcontrollers from Texas
|
||||
Instruments.
|
||||
|
||||
boards/tms570ls31x-usb-kit
|
||||
boards/arm/tmx570/tms570ls31x-usb-kit
|
||||
TI Hercules TMS570LS31xx Evaluation Kit (TMDS570ls31xx USB Kit)
|
||||
featuring the Hercules TMS570LS3137ZWT chip.
|
||||
|
||||
boards/twr-k60n512
|
||||
boards/arm/kinetis/twr-k60n512
|
||||
Kinetis K60 Cortex-M4 MCU. This port uses the FreeScale TWR-K60N512
|
||||
development board.
|
||||
|
||||
boards/twr-k64f120m
|
||||
boards/arm/kinetis/twr-k64f120m
|
||||
Kinetis K64 Cortex-M4 MCU. This port uses the FreeScale TWR-K64F120M
|
||||
development board.
|
||||
|
||||
boards/ubw32
|
||||
|
||||
boards/mips/pic32mx/ubw32
|
||||
This is the port to the Sparkfun UBW32 board. This port uses the original v2.4
|
||||
board which is based on the MicroChip PIC32MX460F512L. See
|
||||
http://www.sparkfun.com/products/8971. This older version has been replaced
|
||||
with this board http://www.sparkfun.com/products/9713. See also
|
||||
http://www.schmalzhaus.com/UBW32/.
|
||||
|
||||
boards/us7032evb1
|
||||
boards/renesas/sh7032/us7032evb1
|
||||
This is a port of the Hitachi SH-1 on the Hitachi SH-1/US7032EVB1 board.
|
||||
STATUS: Work has just began on this port.
|
||||
|
||||
boards/viewtool-stm32f107
|
||||
boards/arm/stm32/viewtool-stm32f107
|
||||
NuttX configurations for the ViewTool STM32F103/F107 V1.2 board. This
|
||||
board may be fitted with either: (1) STM32F107VCT6 or (2) STM32F103VCT6.
|
||||
See http://www.viewtool.com/ for further information.
|
||||
@ -844,32 +844,32 @@ boards/viewtool-stm32f107
|
||||
config/xmc4500-relax
|
||||
Infineon XMC4000 Relax Lite v1
|
||||
|
||||
boards/z16f2800100zcog
|
||||
boards/z16/z16f2811/z16f2800100zcog
|
||||
z16f Microcontroller. This port use the Zilog z16f2800100zcog
|
||||
development kit and the Zilog ZDS-II Windows command line tools. The
|
||||
development environment is Cygwin under WinXP.
|
||||
|
||||
boards/z80sim
|
||||
boards/z80/z80/z80sim
|
||||
z80 Microcontroller. This port uses a Z80 instruction set simulator
|
||||
called z80sim. This port also uses the SDCC toolchain
|
||||
(http://sdcc.sourceforge.net/") (verified with version 2.6.0).
|
||||
|
||||
boards/z8encore000zco
|
||||
boards/z80/z8/z8encore000zco
|
||||
z8Encore! Microcontroller. This port use the Zilog z8encore000zco
|
||||
development kit, Z8F6403 part, and the Zilog ZDS-II Windows command line
|
||||
tools. The development environment is Cygwin under WinXP.
|
||||
|
||||
boards/z8f64200100kit
|
||||
boards/z80/z8/z8f64200100kit
|
||||
z8Encore! Microcontroller. This port use the Zilog z8f64200100kit
|
||||
development kit, Z8F6423 part, and the Zilog ZDS-II Windows command line
|
||||
tools. The development environment is Cygwin under WinXP.
|
||||
|
||||
boards/zp214xpa
|
||||
boards/arm/lpc214x/zp214xpa
|
||||
This port is for the NXP LPC2148 as provided on the The0.net
|
||||
ZPA213X/4XPA development board. Includes support for the
|
||||
UG-2864AMBAG01 OLED also from The0.net
|
||||
|
||||
boards/zkit-arm-1769
|
||||
boards/arm/lpc17xx_40xx/zkit-arm-1769
|
||||
Zilogic System's ARM development Kit, ZKIT-ARM-1769. This board is based
|
||||
on the NXP LPC1769. The Nuttx Buildroot toolchain is used by default.
|
||||
|
||||
@ -878,19 +878,19 @@ Configuring NuttX
|
||||
|
||||
Configuring NuttX requires only copying
|
||||
|
||||
boards/<board-name>/<config-dir>/Make.def to ${TOPDIR}/Make.defs
|
||||
boards/<board-name>/<config-dir>/defconfig to ${TOPDIR}/.config
|
||||
boards/<arch>/<chip>/<board>/<config-dir>/Make.def to ${TOPDIR}/Make.defs
|
||||
boards/<arch>/<chip>/<board>/<config-dir>/defconfig to ${TOPDIR}/.config
|
||||
|
||||
tools/configure.sh
|
||||
There is a script that automates these steps. The following steps will
|
||||
accomplish the same configuration:
|
||||
|
||||
tools/configure.sh <board-name>:<config-dir>
|
||||
tools/configure.sh <board>:<config-dir>
|
||||
|
||||
There is an alternative Windows batch file that can be used in the
|
||||
windows native enironment like:
|
||||
|
||||
tools\configure.bat <board-name>:<config-dir>
|
||||
tools\configure.bat <board>:<config-dir>
|
||||
|
||||
See tools/README.txt for more information about these scripts.
|
||||
|
||||
@ -899,7 +899,7 @@ tools/configure.sh
|
||||
application directory on the command line like:
|
||||
|
||||
cd tools
|
||||
./configure.sh -a <app-dir> <board-name>:<config-dir>
|
||||
./configure.sh -a <app-dir> <board>:<config-dir>
|
||||
|
||||
Building Symbol Tables
|
||||
^^^^^^^^^^^^^^^^^^^^^^
|
||||
|
||||
Loading…
Reference in New Issue
Block a user