sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Merged in fvacek/nuttx (pull request #580)

Browse Source 
NUCLEO F432KC typo fixed, correct name is L432KC

Approved-by: Gregory Nutt <gnutt@nuttx.org>
This commit is contained in:
Fanda 2018-01-21 18:28:47 +00:00 committed by Gregory Nutt
commit 460d362eb7
2 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
configs/nucleo-l432kc/README.txt
View File

@ -230,7 +230,7 @@ NuttX EABI "buildroot" Toolchain
1. You must have already configured Nuttx in <some-dir>/nuttx.
$ tools/configure.sh nucleo-f432kc/nsh
$ tools/configure.sh nucleo-l432kc/nsh
$ make qconfig
$ V=1 make context all 2>&1 | tee mout
@ -296,13 +296,13 @@ NXFLAT Toolchain
mbed
====
The Nucleo-F432KC includes boot loader from mbed:
The Nucleo-L432KC includes boot loader from mbed:
https://mbed.org/handbook/Homepage
Using the mbed loader:
1. Connect the Nucleo-F432kc to the host PC using the USB connector.
1. Connect the Nucleo-L432kc to the host PC using the USB connector.
2. A new file system will appear called NUCLEO; open it with Windows
Explorer (assuming that you are using Windows).
3. Drag and drop nuttx.bin into the MBED window. This will load the
@ -319,7 +319,7 @@ Hardware
LEDs
----
The Nucleo F401RE and Nucleo F432KC provide a single user LED, LD2. LD2
The Nucleo L432KC provides a single user LED, LD2. LD2
is the green LED connected to Arduino signal D13 corresponding to MCU I/O
PB3 (pin 26).
@ -364,7 +364,7 @@ Serial Consoles
TTL to RS-232 converter connection:
Nucleo CN10 STM32F432KC
Nucleo CN10 STM32L432KC
----------- ------------
Pin 21 PA9 USART1_RX *Warning you make need to reverse RX/TX on
Pin 33 PA10 USART1_TX some RS-232 converters
@ -396,7 +396,7 @@ Serial Consoles
TTL to RS-232 converter connection:
Nucleo CN9 STM32F432KC
Nucleo CN9 STM32L432KC
----------- ------------
Pin 1 PA3 USART2_RX *Warning you make need to reverse RX/TX on
Pin 2 PA2 USART2_TX some RS-232 converters
@ -454,7 +454,7 @@ Configurations
nsh:
---------
Configures the NuttShell (nsh) located at apps/examples/nsh for the
Nucleo-F432KC board. The Configuration enables the serial interfaces
Nucleo-L432KC board. The Configuration enables the serial interfaces
on UART2. Support for builtin applications is enabled, but in the base
configuration no builtin applications are selected (see NOTES below).
@ -481,7 +481,7 @@ Configurations
Consoles). I have been using a TTL-to-RS-232 converter connected
as shown below:
Nucleo CN10 STM32F432KC
Nucleo CN10 STM32L432KC
----------- ------------
Pin 21 PA9 USART1_RX *Warning you make need to reverse RX/TX on
Pin 33 PA10 USART1_TX some RS-232 converters

2
configs/nucleo-l432kc/include/board.h
View File

@ -266,4 +266,4 @@ void stm32l4_board_initialize(void);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_NUCLEO_F432KC_INCLUDE_BOARD_H */
#endif /* __CONFIGS_NUCLEO_L432KC_INCLUDE_BOARD_H */