diff --git a/configs/Kconfig b/configs/Kconfig index a46efb462a..7f0bd8f48d 100644 --- a/configs/Kconfig +++ b/configs/Kconfig @@ -936,6 +936,16 @@ config ARCH_BOARD_SPARK (http://www.spark.io). This board features the STM32103CBT6 MCU from STMicro. +config ARCH_BOARD_STM32_BUTTERFLY2 + bool "Kamami STM32Butterfly2 development board" + depends on ARCH_CHIP_STM32F107VC + select ARCH_HAVE_LEDS + select ARCH_HAVE_BUTTONS + ---help--- + A configuration for the Kamami STM32Butterfly2 development board + based on STM32F107VC micro-controler chip with optional ETH + board. + config ARCH_BOARD_STM32_TINY bool "STM32-Tiny board" depends on ARCH_CHIP_STM32F103C8 @@ -1433,6 +1443,7 @@ config ARCH_BOARD default "shenzhou" if ARCH_BOARD_SHENZHOU default "skp16c26" if ARCH_BOARD_SKP16C26 default "spark" if ARCH_BOARD_SPARK + default "stm32butterfly2" if ARCH_BOARD_STM32_BUTTERFLY2 default "stm32_tiny" if ARCH_BOARD_STM32_TINY default "stm32f103-minimum" if ARCH_BOARD_STM32F103_MINIMUM default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL @@ -1775,6 +1786,9 @@ endif if ARCH_BOARD_SPARK source "configs/spark/Kconfig" endif +if ARCH_BOARD_STM32_BUTTERFLY2 +source "configs/stm32butterfly2/Kconfig" +endif if ARCH_BOARD_STM32_TINY source "configs/stm32_tiny/Kconfig" endif diff --git a/configs/README.txt b/configs/README.txt index 6f30c63104..65c481fc12 100644 --- a/configs/README.txt +++ b/configs/README.txt @@ -648,6 +648,9 @@ configs/stm3240g-eval microcontroller (ARM Cortex-M4 with FPU). This port uses a GNU Cortex-M4 toolchain (such as CodeSourcery). +configs/stm32butterfly2 + Kamami stm32butterfly2 development board with optional ETH phy. + configs/stm32f103-minimum Generic STM32F103C8T6 Minimum ARM Development Board. diff --git a/configs/stm32butterfly2/Kconfig b/configs/stm32butterfly2/Kconfig new file mode 100644 index 0000000000..9f26f5f3d2 --- /dev/null +++ b/configs/stm32butterfly2/Kconfig @@ -0,0 +1,7 @@ +# +# For a description of the syntax of this configuration file, +# see the file kconfig-language.txt in the NuttX tools repository. +# + +if ARCH_BOARD_STM32_BUTTERFLY2 +endif diff --git a/configs/stm32butterfly2/include/board.h b/configs/stm32butterfly2/include/board.h new file mode 100644 index 0000000000..1fb66fa9d0 --- /dev/null +++ b/configs/stm32butterfly2/include/board.h @@ -0,0 +1,194 @@ +/******************************************************************************* + * configs/stm32butterfly2/include/board.h + * + * Copyright (C) 2016 Michał Łyszczek. All rights reserved. + * Author: Michał Łyszczek + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ******************************************************************************/ + +#ifndef __CONFIGS_STM32_BUTTERFLY2_INCLUDE_BOARD_H +#define __CONFIGS_STM32_BUTTERFLY2_INCLUDE_BOARD_H 1 + +/******************************************************************************* + * Included Files + ******************************************************************************/ + +#include + +#ifndef __ASSEMBLY__ +# include +#endif + +#include "stm32_rcc.h" + +/******************************************************************************* + * Pre-processor Definitions + ******************************************************************************/ + +/* Clocking *******************************************************************/ + +/* HSI - 8 MHz RC factory-trimmed + * LSI - 40 KHz RC (30-60KHz, uncalibrated) + * HSE - On-board crystal frequency is 14.7456MHz + * LSE - LSE is not connected + */ + +#define STM32_BOARD_XTAL 14745600ul + +#define STM32_HSI_FREQUENCY 8000000ul +#define STM32_LSI_FREQUENCY 40000u +#define STM32_HSE_FREQUENCY STM32_BOARD_XTAL +#define STM32_LSE_FREQUENCY 0 + +/* PLL output is 71.8848MHz */ + +#define STM32_PLL_PREDIV2 RCC_CFGR2_PREDIV2d4 +#define STM32_PLL_PLL2MUL RCC_CFGR2_PLL2MULx12 +#define STM32_PLL_PREDIV1 RCC_CFGR2_PREDIV1d4 +#define STM32_PLL_PLLMUL RCC_CFGR_PLLMUL_CLKx65 +#define STM32_PLL_FREQUENCY 71884800ul + +/* SYSCLK and HCLK adre the PLL frequency */ + +#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY +#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY +#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY + +/* APB2 clock (PCLK2) is HCLK */ + +#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK +#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY +#define STM32_APB2_CLKIN STM32_PCLK2_FREQUENCY + +#define STM32APB_TIM1_CLKIN STM32_PCLK2_FREQUENCY + +/* APB1 clock (PCLK1) is HCLK/2 (35.9424MHz) */ + +#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2 +#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2) + +#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM5_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM6_CLKIN (2*STM32_PCLK1_FREQUENCY) +#define STM32_APB1_TIM7_CLKIN (2*STM32_PCLK1_FREQUENCY) + +/* LED definitions ************************************************************/ +/* There are four LEDs on stm32butterfly2 board that can be controlled by + * software. All pulled high and van be illuminated by driving the output low. + * + * LED1 PB0 + * LED2 PB1 + * LED3 PC4 + * LED4 PC5 + */ + +/* LED index values for use with board_userled() */ + +#define BOARD_LED1 0 +#define BOARD_LED2 1 +#define BOARD_LED3 2 +#define BOARD_LED4 3 +#define BOARD_NLEDS 4 + +/* LED bits for use with board_userled_all() */ + +#define BOARD_LED1_BIT (1 << BOARD_LED1) +#define BOARD_LED2_BIT (1 << BOARD_LED2) +#define BOARD_LED3_BIT (1 << BOARD_LED3) +#define BOARD_LED4_BIT (1 << BOARD_LED4) + +/* These LEDs are not used by the board port unless CONFIG_ARCH_LEDS is defined. + * In thath case, the usage by the board port is defined in include/board.h and + * src/stm32_leds.c. The LEDs are used to encode OS-related events as follows: + * + * SYMBOL Val Meaning LED state + * LED1 LED2 LED3 LED4 + * ----------------- --- ----------------------- ---- ---- ---- ---- */ +#define LED_STARTED 0 /* NuttX has been started ON OFF OFF OFF */ +#define LED_HEAPALLOCATE 1 /* Heap has been allocated OFF ON OFF OFF */ +#define LED_IRQSENABLED 2 /* Interrupts enabled OFF OFF ON OFF */ +#define LED_STACKCREATED 3 /* Idle stack created OFF OFF OFF ON */ +#define LED_INIRQ 5 /* In an interrupt N/C N/C N/C GLOW */ +#define LED_SIGNAL 6 /* In a signal handler N/C N/C N/C GLOW */ +#define LED_ASSERTION 7 /* An assertion failed N/C N/C N/C GLOW */ +#define LED_PANIC 8 /* The system has crashed N/C N/C N/C FLASH */ +#undef LED_IDLE /* MCU is is sleep mode Not used */ + +/* After booting, LED1-3 are not longer used by the system and can be used for + * other purposes by the application (Of course, all LEDs are available to the + * application if CONFIG_ARCH_LEDS is not defined. + */ + +/******************************************************************************* + * Public Data + ******************************************************************************/ + +#ifndef __ASSEMBLY__ + +#undef EXTERN +#if defined(__cplusplus) +#define EXTERN extern "C" +extern "C" { +#else +#define EXTERN extern +#endif + +/******************************************************************************* + * Public Function Prototypes + ******************************************************************************/ + +/******************************************************************************* + * Name: stm32_led_initialize + * + * Description: + * Initializes board specific LEDS + ******************************************************************************/ + void stm32_led_initialize(void); + +/******************************************************************************* + * Name: stm32_boardinitialize + * + * Description: + * All STM32 architectures must provide the following entry point. This + * entry point is called early in the initialization -- after all memory + * has been configured and mapped but before any devices have been + * initialized. + ******************************************************************************/ +EXTERN void stm32_boardinitialize(void); + +#undef EXTERN +#if defined(__cplusplus) +} +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __CONFIGS_STM32_BUTTERFLY2_INCLUDE_BOARD_H */ diff --git a/configs/stm32butterfly2/nsh/Make.defs b/configs/stm32butterfly2/nsh/Make.defs new file mode 100644 index 0000000000..55c08e0406 --- /dev/null +++ b/configs/stm32butterfly2/nsh/Make.defs @@ -0,0 +1,117 @@ +############################################################################ +# configs/viewtool-stm32f107/nsh/Make.defs +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +ifeq ($(CONFIG_STM32_DFU),y) + LDSCRIPT = dfu.ld +else + LDSCRIPT = flash.ld +endif + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = + diff --git a/configs/stm32butterfly2/nsh/defconfig b/configs/stm32butterfly2/nsh/defconfig new file mode 100644 index 0000000000..91c9c3ccc4 --- /dev/null +++ b/configs/stm32butterfly2/nsh/defconfig @@ -0,0 +1,1139 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +CONFIG_APPS_DIR="../apps" +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set +# CONFIG_ARCH_DEBUG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG_ALERT=y +# CONFIG_DEBUG_FEATURES is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +CONFIG_ARCH_HAVE_HEAPCHECK=y +# CONFIG_HEAP_COLORATION is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX1 is not set +# CONFIG_ARCH_CHIP_IMX6 is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STM32F7 is not set +# CONFIG_ARCH_CHIP_STM32L4 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_CHIP_TMS570 is not set +# CONFIG_ARCH_CHIP_MOXART is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +CONFIG_ARCH_CORTEXM3=y +# CONFIG_ARCH_CORTEXM4 is not set +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +# CONFIG_ARCH_CORTEXA9 is not set +# CONFIG_ARCH_CORTEXR4 is not set +# CONFIG_ARCH_CORTEXR4F is not set +# CONFIG_ARCH_CORTEXR5 is not set +# CONFIG_ARCH_CORTEX5F is not set +# CONFIG_ARCH_CORTEXR7 is not set +# CONFIG_ARCH_CORTEXR7F is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +# CONFIG_ARM_TOOLCHAIN_IAR is not set +CONFIG_ARM_TOOLCHAIN_GNU=y +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARMV7M_LAZYFPU is not set +# CONFIG_ARCH_HAVE_FPU is not set +# CONFIG_ARCH_HAVE_DPFPU is not set +# CONFIG_ARCH_HAVE_TRUSTZONE is not set +CONFIG_ARM_HAVE_MPU_UNIFIED=y +# CONFIG_ARM_MPU is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set +# CONFIG_ARMV7M_OABI_TOOLCHAIN is not set +CONFIG_ARMV7M_HAVE_STACKCHECK=y +# CONFIG_ARMV7M_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32L151C6 is not set +# CONFIG_ARCH_CHIP_STM32L151C8 is not set +# CONFIG_ARCH_CHIP_STM32L151CB is not set +# CONFIG_ARCH_CHIP_STM32L151R6 is not set +# CONFIG_ARCH_CHIP_STM32L151R8 is not set +# CONFIG_ARCH_CHIP_STM32L151RB is not set +# CONFIG_ARCH_CHIP_STM32L151V6 is not set +# CONFIG_ARCH_CHIP_STM32L151V8 is not set +# CONFIG_ARCH_CHIP_STM32L151VB is not set +# CONFIG_ARCH_CHIP_STM32L152C6 is not set +# CONFIG_ARCH_CHIP_STM32L152C8 is not set +# CONFIG_ARCH_CHIP_STM32L152CB is not set +# CONFIG_ARCH_CHIP_STM32L152R6 is not set +# CONFIG_ARCH_CHIP_STM32L152R8 is not set +# CONFIG_ARCH_CHIP_STM32L152RB is not set +# CONFIG_ARCH_CHIP_STM32L152V6 is not set +# CONFIG_ARCH_CHIP_STM32L152V8 is not set +# CONFIG_ARCH_CHIP_STM32L152VB is not set +# CONFIG_ARCH_CHIP_STM32L162ZD is not set +# CONFIG_ARCH_CHIP_STM32L162VE is not set +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F102CB is not set +# CONFIG_ARCH_CHIP_STM32F103T8 is not set +# CONFIG_ARCH_CHIP_STM32F103TB is not set +# CONFIG_ARCH_CHIP_STM32F103C4 is not set +# CONFIG_ARCH_CHIP_STM32F103C8 is not set +# CONFIG_ARCH_CHIP_STM32F103CB is not set +# CONFIG_ARCH_CHIP_STM32F103R8 is not set +# CONFIG_ARCH_CHIP_STM32F103RB is not set +# CONFIG_ARCH_CHIP_STM32F103RC is not set +# CONFIG_ARCH_CHIP_STM32F103RD is not set +# CONFIG_ARCH_CHIP_STM32F103RE is not set +# CONFIG_ARCH_CHIP_STM32F103RG is not set +# CONFIG_ARCH_CHIP_STM32F103V8 is not set +# CONFIG_ARCH_CHIP_STM32F103VB is not set +# CONFIG_ARCH_CHIP_STM32F103VC is not set +# CONFIG_ARCH_CHIP_STM32F103VE is not set +# CONFIG_ARCH_CHIP_STM32F103ZE is not set +# CONFIG_ARCH_CHIP_STM32F105VB is not set +# CONFIG_ARCH_CHIP_STM32F105RB is not set +CONFIG_ARCH_CHIP_STM32F107VC=y +# CONFIG_ARCH_CHIP_STM32F205RG is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F207ZE is not set +# CONFIG_ARCH_CHIP_STM32F302K6 is not set +# CONFIG_ARCH_CHIP_STM32F302K8 is not set +# CONFIG_ARCH_CHIP_STM32F302CB is not set +# CONFIG_ARCH_CHIP_STM32F302CC is not set +# CONFIG_ARCH_CHIP_STM32F302RB is not set +# CONFIG_ARCH_CHIP_STM32F302RC is not set +# CONFIG_ARCH_CHIP_STM32F302VB is not set +# CONFIG_ARCH_CHIP_STM32F302VC is not set +# CONFIG_ARCH_CHIP_STM32F303K6 is not set +# CONFIG_ARCH_CHIP_STM32F303K8 is not set +# CONFIG_ARCH_CHIP_STM32F303C6 is not set +# CONFIG_ARCH_CHIP_STM32F303C8 is not set +# CONFIG_ARCH_CHIP_STM32F303CB is not set +# CONFIG_ARCH_CHIP_STM32F303CC is not set +# CONFIG_ARCH_CHIP_STM32F303RB is not set +# CONFIG_ARCH_CHIP_STM32F303RC is not set +# CONFIG_ARCH_CHIP_STM32F303RD is not set +# CONFIG_ARCH_CHIP_STM32F303RE is not set +# CONFIG_ARCH_CHIP_STM32F303VB is not set +# CONFIG_ARCH_CHIP_STM32F303VC is not set +# CONFIG_ARCH_CHIP_STM32F372C8 is not set +# CONFIG_ARCH_CHIP_STM32F372R8 is not set +# CONFIG_ARCH_CHIP_STM32F372V8 is not set +# CONFIG_ARCH_CHIP_STM32F372CB is not set +# CONFIG_ARCH_CHIP_STM32F372RB is not set +# CONFIG_ARCH_CHIP_STM32F372VB is not set +# CONFIG_ARCH_CHIP_STM32F372CC is not set +# CONFIG_ARCH_CHIP_STM32F372RC is not set +# CONFIG_ARCH_CHIP_STM32F372VC is not set +# CONFIG_ARCH_CHIP_STM32F373C8 is not set +# CONFIG_ARCH_CHIP_STM32F373R8 is not set +# CONFIG_ARCH_CHIP_STM32F373V8 is not set +# CONFIG_ARCH_CHIP_STM32F373CB is not set +# CONFIG_ARCH_CHIP_STM32F373RB is not set +# CONFIG_ARCH_CHIP_STM32F373VB is not set +# CONFIG_ARCH_CHIP_STM32F373CC is not set +# CONFIG_ARCH_CHIP_STM32F373RC is not set +# CONFIG_ARCH_CHIP_STM32F373VC is not set +# CONFIG_ARCH_CHIP_STM32F401RE is not set +# CONFIG_ARCH_CHIP_STM32F411RE is not set +# CONFIG_ARCH_CHIP_STM32F411VE is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +# CONFIG_ARCH_CHIP_STM32F407VG is not set +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +# CONFIG_ARCH_CHIP_STM32F427V is not set +# CONFIG_ARCH_CHIP_STM32F427Z is not set +# CONFIG_ARCH_CHIP_STM32F427I is not set +# CONFIG_ARCH_CHIP_STM32F429V is not set +# CONFIG_ARCH_CHIP_STM32F429Z is not set +# CONFIG_ARCH_CHIP_STM32F429I is not set +# CONFIG_ARCH_CHIP_STM32F429B is not set +# CONFIG_ARCH_CHIP_STM32F429N is not set +# CONFIG_ARCH_CHIP_STM32F446M is not set +# CONFIG_ARCH_CHIP_STM32F446R is not set +# CONFIG_ARCH_CHIP_STM32F446V is not set +# CONFIG_ARCH_CHIP_STM32F446Z is not set +# CONFIG_ARCH_CHIP_STM32F469A is not set +# CONFIG_ARCH_CHIP_STM32F469I is not set +# CONFIG_ARCH_CHIP_STM32F469B is not set +# CONFIG_ARCH_CHIP_STM32F469N is not set +CONFIG_STM32_FLASH_CONFIG_DEFAULT=y +# CONFIG_STM32_FLASH_CONFIG_4 is not set +# CONFIG_STM32_FLASH_CONFIG_6 is not set +# CONFIG_STM32_FLASH_CONFIG_8 is not set +# CONFIG_STM32_FLASH_CONFIG_B is not set +# CONFIG_STM32_FLASH_CONFIG_C is not set +# CONFIG_STM32_FLASH_CONFIG_D is not set +# CONFIG_STM32_FLASH_CONFIG_E is not set +# CONFIG_STM32_FLASH_CONFIG_F is not set +# CONFIG_STM32_FLASH_CONFIG_G is not set +# CONFIG_STM32_FLASH_CONFIG_I is not set +# CONFIG_STM32_STM32L15XX is not set +# CONFIG_STM32_ENERGYLITE is not set +CONFIG_STM32_STM32F10XX=y +# CONFIG_STM32_VALUELINE is not set +CONFIG_STM32_CONNECTIVITYLINE=y +# CONFIG_STM32_PERFORMANCELINE is not set +# CONFIG_STM32_USBACCESSLINE is not set +# CONFIG_STM32_HIGHDENSITY is not set +# CONFIG_STM32_MEDIUMDENSITY is not set +# CONFIG_STM32_LOWDENSITY is not set +# CONFIG_STM32_STM32F20XX is not set +# CONFIG_STM32_STM32F205 is not set +# CONFIG_STM32_STM32F207 is not set +# CONFIG_STM32_STM32F30XX is not set +# CONFIG_STM32_STM32F302 is not set +# CONFIG_STM32_STM32F303 is not set +# CONFIG_STM32_STM32F37XX is not set +# CONFIG_STM32_STM32F40XX is not set +# CONFIG_STM32_STM32F401 is not set +# CONFIG_STM32_STM32F411 is not set +# CONFIG_STM32_STM32F405 is not set +# CONFIG_STM32_STM32F407 is not set +# CONFIG_STM32_STM32F427 is not set +# CONFIG_STM32_STM32F429 is not set +# CONFIG_STM32_STM32F446 is not set +# CONFIG_STM32_STM32F469 is not set +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +# CONFIG_STM32_HAVE_CCM is not set +# CONFIG_STM32_HAVE_USBDEV is not set +CONFIG_STM32_HAVE_OTGFS=y +# CONFIG_STM32_HAVE_FSMC is not set +# CONFIG_STM32_HAVE_LTDC is not set +CONFIG_STM32_HAVE_USART3=y +CONFIG_STM32_HAVE_UART4=y +CONFIG_STM32_HAVE_UART5=y +# CONFIG_STM32_HAVE_USART6 is not set +# CONFIG_STM32_HAVE_UART7 is not set +# CONFIG_STM32_HAVE_UART8 is not set +CONFIG_STM32_HAVE_TIM1=y +# CONFIG_STM32_HAVE_TIM2 is not set +CONFIG_STM32_HAVE_TIM3=y +CONFIG_STM32_HAVE_TIM4=y +CONFIG_STM32_HAVE_TIM5=y +CONFIG_STM32_HAVE_TIM6=y +CONFIG_STM32_HAVE_TIM7=y +# CONFIG_STM32_HAVE_TIM8 is not set +# CONFIG_STM32_HAVE_TIM9 is not set +# CONFIG_STM32_HAVE_TIM10 is not set +# CONFIG_STM32_HAVE_TIM11 is not set +# CONFIG_STM32_HAVE_TIM12 is not set +# CONFIG_STM32_HAVE_TIM13 is not set +# CONFIG_STM32_HAVE_TIM14 is not set +# CONFIG_STM32_HAVE_TIM15 is not set +# CONFIG_STM32_HAVE_TIM16 is not set +# CONFIG_STM32_HAVE_TIM17 is not set +CONFIG_STM32_HAVE_ADC2=y +# CONFIG_STM32_HAVE_ADC3 is not set +# CONFIG_STM32_HAVE_ADC4 is not set +# CONFIG_STM32_HAVE_ADC1_DMA is not set +# CONFIG_STM32_HAVE_ADC2_DMA is not set +# CONFIG_STM32_HAVE_ADC3_DMA is not set +# CONFIG_STM32_HAVE_ADC4_DMA is not set +CONFIG_STM32_HAVE_CAN1=y +CONFIG_STM32_HAVE_CAN2=y +CONFIG_STM32_HAVE_DAC1=y +CONFIG_STM32_HAVE_DAC2=y +# CONFIG_STM32_HAVE_RNG is not set +CONFIG_STM32_HAVE_ETHMAC=y +# CONFIG_STM32_HAVE_I2C2 is not set +# CONFIG_STM32_HAVE_I2C3 is not set +CONFIG_STM32_HAVE_SPI2=y +CONFIG_STM32_HAVE_SPI3=y +# CONFIG_STM32_HAVE_SPI4 is not set +# CONFIG_STM32_HAVE_SPI5 is not set +# CONFIG_STM32_HAVE_SPI6 is not set +# CONFIG_STM32_HAVE_SAIPLL is not set +# CONFIG_STM32_HAVE_I2SPLL is not set +# CONFIG_STM32_ADC1 is not set +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_BKP is not set +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_ETHMAC is not set +# CONFIG_STM32_I2C1 is not set +# CONFIG_STM32_OTGFS is not set +CONFIG_STM32_PWR=y +# CONFIG_STM32_SPI1 is not set +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_USART1 is not set +CONFIG_STM32_USART2=y +# CONFIG_STM32_USART3 is not set +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_IWDG is not set +# CONFIG_STM32_WWDG is not set +# CONFIG_STM32_NOEXT_VECTORS is not set + +# +# Alternate Pin Mapping +# +CONFIG_STM32_USART2_REMAP=y +# CONFIG_STM32_JTAG_DISABLE is not set +CONFIG_STM32_JTAG_FULL_ENABLE=y +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +# CONFIG_STM32_JTAG_SW_ENABLE is not set +# CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG is not set +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set + +# +# Timer Configuration +# +# CONFIG_STM32_ONESHOT is not set +# CONFIG_STM32_FREERUN is not set +# CONFIG_STM32_TIM1_CAP is not set +# CONFIG_STM32_TIM3_CAP is not set +# CONFIG_STM32_TIM4_CAP is not set +# CONFIG_STM32_TIM5_CAP is not set +CONFIG_STM32_USART=y +CONFIG_STM32_SERIALDRIVER=y + +# +# U[S]ART Configuration +# + +# +# U[S]ART Device Configuration +# +CONFIG_STM32_USART2_SERIALDRIVER=y +# CONFIG_STM32_USART2_1WIREDRIVER is not set +# CONFIG_USART2_RS485 is not set + +# +# Serial Driver Configuration +# +# CONFIG_SERIAL_DISABLE_REORDERING is not set +# CONFIG_STM32_FLOWCONTROL_BROKEN is not set +# CONFIG_STM32_USART_BREAKS is not set +# CONFIG_STM32_USART_SINGLEWIRE is not set +CONFIG_STM32_HAVE_RTC_COUNTER=y +# CONFIG_STM32_HAVE_RTC_SUBSECONDS is not set + +# +# USB FS Host Configuration +# + +# +# USB HS Host Configuration +# + +# +# USB Host Debug Configuration +# + +# +# USB Device Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +# CONFIG_ARCH_HAVE_MULTICPU is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +CONFIG_ARCH_HAVE_RESET=y +# CONFIG_ARCH_USE_MPU is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=5483 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=65536 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +# CONFIG_ARCH_BOARD_CLOUDCTRL is not set +# CONFIG_ARCH_BOARD_OLIMEX_STM32P107 is not set +# CONFIG_ARCH_BOARD_SHENZHOU is not set +CONFIG_ARCH_BOARD_STM32_BUTTERFLY2=y +# CONFIG_ARCH_BOARD_VIEWTOOL_STM32F107 is not set +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="stm32butterfly2" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +# CONFIG_ARCH_BUTTONS is not set + +# +# Board-Specific Options +# +# CONFIG_BOARD_CRASHDUMP is not set +# CONFIG_LIB_BOARDCTL is not set + +# +# RTOS Features +# +# CONFIG_DISABLE_OS_API is not set + +# +# Clocks and Timers +# +CONFIG_ARCH_HAVE_TICKLESS=y +# CONFIG_SCHED_TICKLESS is not set +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=1970 +CONFIG_START_MONTH=0 +CONFIG_START_DAY=1 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=8 +CONFIG_WDOG_INTRESERVE=1 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=100 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=31 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_SCHED_WAITPID is not set + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +CONFIG_SCHED_CPULOAD=y +# CONFIG_SCHED_CPULOAD_EXTCLK is not set +CONFIG_SCHED_CPULOAD_TIMECONSTANT=2 +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +# CONFIG_SIG_EVTHREAD is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 +CONFIG_SIG_SIGWORK=17 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +CONFIG_SCHED_WORKQUEUE=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_HPWORKPRIORITY=192 +CONFIG_SCHED_HPWORKPERIOD=50000 +CONFIG_SCHED_HPWORKSTACKSIZE=1024 +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +# CONFIG_DISABLE_POLL is not set +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_URANDOM is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +CONFIG_RAMDISK=y +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +CONFIG_ARCH_HAVE_I2CRESET=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set + +# +# IO Expander/GPIO Support +# +# CONFIG_IOEXPANDER is not set +# CONFIG_DEV_GPIO is not set + +# +# LCD Driver Support +# +# CONFIG_LCD is not set +# CONFIG_SLCD is not set + +# +# LED Support +# +# CONFIG_USERLED is not set +# CONFIG_RGBLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_NCP5623C is not set +# CONFIG_MMCSD is not set +# CONFIG_MODEM is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_SERIAL_REMOVABLE is not set +CONFIG_SERIAL_CONSOLE=y +# CONFIG_16550_UART is not set +# CONFIG_UART_SERIALDRIVER is not set +# CONFIG_UART0_SERIALDRIVER is not set +# CONFIG_UART1_SERIALDRIVER is not set +# CONFIG_UART2_SERIALDRIVER is not set +# CONFIG_UART3_SERIALDRIVER is not set +# CONFIG_UART4_SERIALDRIVER is not set +# CONFIG_UART5_SERIALDRIVER is not set +# CONFIG_UART6_SERIALDRIVER is not set +# CONFIG_UART7_SERIALDRIVER is not set +# CONFIG_UART8_SERIALDRIVER is not set +# CONFIG_SCI0_SERIALDRIVER is not set +# CONFIG_SCI1_SERIALDRIVER is not set +# CONFIG_USART0_SERIALDRIVER is not set +# CONFIG_USART1_SERIALDRIVER is not set +CONFIG_USART2_SERIALDRIVER=y +# CONFIG_USART3_SERIALDRIVER is not set +# CONFIG_USART4_SERIALDRIVER is not set +# CONFIG_USART5_SERIALDRIVER is not set +# CONFIG_USART6_SERIALDRIVER is not set +# CONFIG_USART7_SERIALDRIVER is not set +# CONFIG_USART8_SERIALDRIVER is not set +# CONFIG_OTHER_UART_SERIALDRIVER is not set +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_SERIAL_NPOLLWAITERS=2 +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_USART2_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART2 Configuration +# +CONFIG_USART2_RXBUFSIZE=256 +CONFIG_USART2_TXBUFSIZE=256 +CONFIG_USART2_BAUD=115200 +CONFIG_USART2_BITS=8 +CONFIG_USART2_PARITY=0 +CONFIG_USART2_2STOP=0 +# CONFIG_USART2_IFLOWCONTROL is not set +# CONFIG_USART2_OFLOWCONTROL is not set +# CONFIG_USART2_DMA is not set +# CONFIG_PSEUDOTERM is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_HAVE_USBTRACE is not set +# CONFIG_DRIVERS_WIRELESS is not set + +# +# System Logging +# +# CONFIG_ARCH_SYSLOG is not set +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_INTBUFFER is not set +CONFIG_SYSLOG_TIMESTAMP=y +CONFIG_SYSLOG_SERIAL_CONSOLE=y +# CONFIG_SYSLOG_CHAR is not set +CONFIG_SYSLOG_CONSOLE=y +# CONFIG_SYSLOG_NONE is not set +# CONFIG_SYSLOG_FILE is not set +# CONFIG_SYSLOG_CHARDEV is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_FS_READABLE is not set +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +# CONFIG_FS_PROCFS is not set +# CONFIG_FS_UNIONFS is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Wireless Support +# + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_IOCTL_VARIADIC is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +CONFIG_LIBC_STRERROR=y +CONFIG_LIBC_STRERROR_SHORT=y +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set +CONFIG_ARCH_HAVE_TLS=y +# CONFIG_TLS is not set +# CONFIG_LIBC_NETDB is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_CRC64_FAST is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set +# CONFIG_LIB_HEX2BIN is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# NxWidgets/NxWM +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_CHAT is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PCA9635 is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_RGBLED is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMP is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WEBSERVER is not set + +# +# File System Utilities +# +# CONFIG_FSUTILS_INIFILE is not set + +# +# GPS Utilities +# +# CONFIG_GPSUTILS_MINMEA_LIB is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CHAT is not set +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_ESP8266 is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_MOTD=y +# CONFIG_NSH_PLATFORM_MOTD is not set +CONFIG_NSH_MOTD_STRING="stm32butterfly2 welcoms you" + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=80 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_BASENAME is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +# CONFIG_NSH_DISABLE_DATE is not set +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_DIRNAME is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +CONFIG_NSH_DISABLE_IFUPDOWN=y +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TIME is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Configure Command Options +# +CONFIG_NSH_CMDOPT_DF_H=y +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_CMDOPT_HEXDUMP=y +CONFIG_NSH_FILEIOSIZE=1024 +CONFIG_NSH_STRERROR=y + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set +# CONFIG_NSH_LOGIN is not set +# CONFIG_NSH_CONSOLE_LOGIN is not set + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +CONFIG_READLINE_TABCOMPLETION=y +CONFIG_READLINE_MAX_BUILTINS=64 +CONFIG_READLINE_MAX_EXTCMDS=64 +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_UBLOXMODEM is not set +CONFIG_SYSTEM_VI=y +CONFIG_SYSTEM_VI_COLS=64 +CONFIG_SYSTEM_VI_ROWS=16 +CONFIG_SYSTEM_VI_DEBUGLEVEL=0 +CONFIG_SYSTEM_VI_STACKSIZE=2048 +CONFIG_SYSTEM_VI_PRIORITY=100 +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/stm32butterfly2/nsh/setenv.sh b/configs/stm32butterfly2/nsh/setenv.sh new file mode 100755 index 0000000000..8b5188cf96 --- /dev/null +++ b/configs/stm32butterfly2/nsh/setenv.sh @@ -0,0 +1,78 @@ +#!/bin/bash +# configs/viewtool-stm32f107/nsh/setenv.sh +# +# Copyright (C) 2013 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the RIDE +# toolchain under windows. You will also have to edit this if you install +# the RIDE toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" +#export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/configs/stm32butterfly2/scripts/dfu.ld b/configs/stm32butterfly2/scripts/dfu.ld new file mode 100644 index 0000000000..2658216b1b --- /dev/null +++ b/configs/stm32butterfly2/scripts/dfu.ld @@ -0,0 +1,116 @@ +/**************************************************************************** + * configs/viewtool-stm32f107/scripts/dfu.ld + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08003000, LENGTH = 208K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K +} + +OUTPUT_ARCH(arm) +EXTERN(_vectors) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + /* The RAM vector table (if present) should lie at the beginning of SRAM */ + + .ram_vectors : { + *(.ram_vectors) + } > sram + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/stm32butterfly2/scripts/flash.ld b/configs/stm32butterfly2/scripts/flash.ld new file mode 100644 index 0000000000..8b6d9332ab --- /dev/null +++ b/configs/stm32butterfly2/scripts/flash.ld @@ -0,0 +1,116 @@ +/**************************************************************************** + * configs/viewtool-stm32f107/scripts/flash.ld + * + * Copyright (C) 2013 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************/ + +MEMORY +{ + flash (rx) : ORIGIN = 0x08000000, LENGTH = 256K + sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K +} + +OUTPUT_ARCH(arm) +EXTERN(_vectors) +ENTRY(_stext) +SECTIONS +{ + .text : { + _stext = ABSOLUTE(.); + *(.vectors) + *(.text .text.*) + *(.fixup) + *(.gnu.warning) + *(.rodata .rodata.*) + *(.gnu.linkonce.t.*) + *(.glue_7) + *(.glue_7t) + *(.got) + *(.gcc_except_table) + *(.gnu.linkonce.r.*) + _etext = ABSOLUTE(.); + } > flash + + .init_section : { + _sinit = ABSOLUTE(.); + *(.init_array .init_array.*) + _einit = ABSOLUTE(.); + } > flash + + .ARM.extab : { + *(.ARM.extab*) + } > flash + + __exidx_start = ABSOLUTE(.); + .ARM.exidx : { + *(.ARM.exidx*) + } > flash + __exidx_end = ABSOLUTE(.); + + _eronly = ABSOLUTE(.); + + /* The RAM vector table (if present) should lie at the beginning of SRAM */ + + .ram_vectors : { + *(.ram_vectors) + } > sram + + .data : { + _sdata = ABSOLUTE(.); + *(.data .data.*) + *(.gnu.linkonce.d.*) + CONSTRUCTORS + _edata = ABSOLUTE(.); + } > sram AT > flash + + .bss : { + _sbss = ABSOLUTE(.); + *(.bss .bss.*) + *(.gnu.linkonce.b.*) + *(COMMON) + _ebss = ABSOLUTE(.); + } > sram + + /* Stabs debugging sections. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + .stab.excl 0 : { *(.stab.excl) } + .stab.exclstr 0 : { *(.stab.exclstr) } + .stab.index 0 : { *(.stab.index) } + .stab.indexstr 0 : { *(.stab.indexstr) } + .comment 0 : { *(.comment) } + .debug_abbrev 0 : { *(.debug_abbrev) } + .debug_info 0 : { *(.debug_info) } + .debug_line 0 : { *(.debug_line) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_aranges 0 : { *(.debug_aranges) } +} diff --git a/configs/stm32butterfly2/src/Makefile b/configs/stm32butterfly2/src/Makefile new file mode 100644 index 0000000000..f8483678fe --- /dev/null +++ b/configs/stm32butterfly2/src/Makefile @@ -0,0 +1,41 @@ +############################################################################ +# configs/stm32butterfly2/src/Makefile +# +# Copyright (C) 2016 Michał Łyszczek. All rights reserved. +# Author: Michał Łyszczek +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +-include $(TOPDIR)/Make.defs + +ASRCS = +CSRCS = stm32_boot.c stm32_leds.c + +include $(TOPDIR)/configs/Board.mk diff --git a/configs/stm32butterfly2/src/stm32_boot.c b/configs/stm32butterfly2/src/stm32_boot.c new file mode 100644 index 0000000000..d123369c29 --- /dev/null +++ b/configs/stm32butterfly2/src/stm32_boot.c @@ -0,0 +1,50 @@ +/******************************************************************************* + * configs/stm32butterfly2/src/boot.c + * + * Copyright (C) 2016 Michał Łyszczek. All rights reserved. + * Author: Michał Łyszczek + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ******************************************************************************/ + +/******************************************************************************* + * Included Files + ******************************************************************************/ + +#include +#include + +/******************************************************************************* + * Public Functions + ******************************************************************************/ + +void stm32_boardinitialize(void) +{ + stm32_led_initialize(); +} diff --git a/configs/stm32butterfly2/src/stm32_leds.c b/configs/stm32butterfly2/src/stm32_leds.c new file mode 100644 index 0000000000..46ac5e6ff4 --- /dev/null +++ b/configs/stm32butterfly2/src/stm32_leds.c @@ -0,0 +1,201 @@ +/******************************************************************************* + * configs/stm32butterfly2/src/led.c + * + * Copyright (C) 2016 Michał Łyszczek. All rights reserved. + * Author: Michał Łyszczek + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ******************************************************************************/ + +/******************************************************************************* + * Included Files + ******************************************************************************/ + +#include + +#include +#include + +#include +#include +#include + +#include "stm32_gpio.h" + +/******************************************************************************* + * Pre-processor definitions + ******************************************************************************/ + +#define GPIO_LED1 (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz |\ + GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN0) +#define GPIO_LED2 (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz |\ + GPIO_OUTPUT_SET | GPIO_PORTB | GPIO_PIN1) +#define GPIO_LED3 (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz |\ + GPIO_OUTPUT_SET | GPIO_PORTC | GPIO_PIN4) +#define GPIO_LED4 (GPIO_OUTPUT | GPIO_CNF_OUTPP | GPIO_MODE_50MHz |\ + GPIO_OUTPUT_SET | GPIO_PORTC | GPIO_PIN5) + +/******************************************************************************* + * Private Types + ******************************************************************************/ + +/* Identifies led state */ +enum led_state +{ + LED_ON = false, + LED_OFF = true +}; + +/******************************************************************************* + * Private Functions + ******************************************************************************/ + +static void led_state(enum led_state state, unsigned int leds) +{ + if (leds & BOARD_LED1_BIT) + { + stm32_gpiowrite(GPIO_LED1, state); + } + + if (leds & BOARD_LED2_BIT) + { + stm32_gpiowrite(GPIO_LED2, state); + } + + if (leds & BOARD_LED3_BIT) + { + stm32_gpiowrite(GPIO_LED3, state); + } + + if (leds & BOARD_LED4_BIT) + { + stm32_gpiowrite(GPIO_LED4, state); + } +} + +/******************************************************************************* + * Public Functions + ******************************************************************************/ + +void stm32_led_initialize(void) +{ + stm32_configgpio(GPIO_LED1); + stm32_configgpio(GPIO_LED2); + stm32_configgpio(GPIO_LED3); + stm32_configgpio(GPIO_LED4); +} + +#ifdef CONFIG_ARCH_LEDS +void board_autoled_on(int led) +{ + switch (led) + { + case LED_STARTED: + led_state(LED_OFF, BOARD_LED2_BIT | BOARD_LED3_BIT | BOARD_LED4_BIT); + led_state(LED_ON, BOARD_LED1_BIT); + break; + + case LED_HEAPALLOCATE: + led_state(LED_OFF, BOARD_LED1_BIT | BOARD_LED3_BIT | BOARD_LED4_BIT); + led_state(LED_ON, BOARD_LED2_BIT); + break; + + case LED_IRQSENABLED: + led_state(LED_OFF, BOARD_LED1_BIT | BOARD_LED2_BIT | BOARD_LED4_BIT); + led_state(LED_ON, BOARD_LED3_BIT); + break; + + case LED_STACKCREATED: + led_state(LED_OFF, BOARD_LED1_BIT | BOARD_LED2_BIT | BOARD_LED3_BIT); + led_state(LED_ON, BOARD_LED4_BIT); + break; + + case LED_INIRQ: + case LED_SIGNAL: + case LED_ASSERTION: + case LED_PANIC: + led_state(LED_ON, BOARD_LED4_BIT); + break; + } +} + +void board_autoled_off(int led) +{ + switch (led) + { + case LED_STARTED: + led_state(LED_OFF, BOARD_LED1_BIT); + break; + + case LED_HEAPALLOCATE: + led_state(LED_OFF, BOARD_LED2_BIT); + break; + + case LED_IRQSENABLED: + led_state(LED_OFF, BOARD_LED3_BIT); + break; + + case LED_STACKCREATED: + case LED_INIRQ: + case LED_SIGNAL: + case LED_ASSERTION: + case LED_PANIC: + led_state(LED_OFF, BOARD_LED4_BIT); + break; + } +} +#endif + +void board_userled_initialize(void) +{ + /* Already initialized by stm32_led_initialize. */ +} + +void board_userled(int led, bool ledon) +{ +#ifndef CONFIG_ARCH_LEDS + if (led == BOARD_LED4) + { + return; + } +#endif + unsigned int ledbit = 1 << led; + led_state(ledon, ledbit); +} + +void board_userled_all(uint8_t ledset) +{ +#ifdef CONFIG_ARCH_LEDS + led_state(LED_ON, ledset & ~BOARD_LED4_BIT); + led_state(LED_OFF, ~(ledset | BOARD_LED4_BIT)); +#else + led_state(LED_ON, ledset); + led_state(led_OFF, ~ledset); +#endif +}