diff --git a/arch/xtensa/src/common/xtensa_testset.c b/arch/xtensa/src/common/xtensa_testset.c index b4b3baa0fb..8dd15fdec9 100644 --- a/arch/xtensa/src/common/xtensa_testset.c +++ b/arch/xtensa/src/common/xtensa_testset.c @@ -39,8 +39,7 @@ #include -#include - +#include #include #include "xtensa.h" @@ -139,3 +138,5 @@ spinlock_t up_testset(volatile FAR spinlock_t *lock) return (prev == SP_UNLOCKED) ? SP_UNLOCKED : SP_LOCKED; } + +#endif /* CONFIG_SPINLOCK */ diff --git a/arch/xtensa/src/esp32/esp32_cpustart.c b/arch/xtensa/src/esp32/esp32_cpustart.c index b3c2e90c9c..5b17abb0f9 100644 --- a/arch/xtensa/src/esp32/esp32_cpustart.c +++ b/arch/xtensa/src/esp32/esp32_cpustart.c @@ -49,7 +49,9 @@ #include "sched/sched.h" #include "xtensa.h" +#include "chip/esp32_dport.h" #include "esp32_region.h" +#include "esp32_cpuint.h" #ifdef CONFIG_SMP @@ -60,7 +62,7 @@ void ets_set_appcpu_boot_addr(uint32_t); * Private Data ****************************************************************************/ -static bool g_appcpu_started; +static volatile bool g_appcpu_started; static sem_t g_appcpu_interlock; /**************************************************************************** @@ -207,14 +209,14 @@ int up_cpu_start(int cpu) /* Start CPU1 */ sinfo("Starting CPU%d\n", cpu); - sem_init(&g_appcpu_interlock, 0, 0) + sem_init(&g_appcpu_interlock, 0, 0); regval = getreg32(DPORT_APPCPU_CTRL_B_REG); regval |= DPORT_APPCPU_CLKGATE_EN; putreg32(regval, DPORT_APPCPU_CTRL_B_REG); regval = getreg32(DPORT_APPCPU_CTRL_C_REG); - regval ~= DPORT_APPCPU_RUNSTALL; + regval &= ~DPORT_APPCPU_RUNSTALL; putreg32(regval, DPORT_APPCPU_CTRL_C_REG); regval = getreg32(DPORT_APPCPU_CTRL_A_REG); @@ -231,7 +233,7 @@ int up_cpu_start(int cpu) /* And way for the initial task to run on CPU1 */ - while (!app_cpu_started) + while (!g_appcpu_started) { ret = sem_wait(&g_appcpu_interlock); if (ret < 0) @@ -241,6 +243,7 @@ int up_cpu_start(int cpu) } sem_destroy(&g_appcpu_interlock); + return OK; } } diff --git a/configs/esp32-core/README.txt b/configs/esp32-core/README.txt index 1f0ff0d717..f823864307 100644 --- a/configs/esp32-core/README.txt +++ b/configs/esp32-core/README.txt @@ -155,3 +155,10 @@ NOTES: Configures the NuttShell (nsh) located at apps/examples/nsh. NOTES: + + smp: + + Another NSH configuration, similar to nsh, but also enables + SMP operation. + + NOTES: diff --git a/configs/esp32-core/smp/Make.defs b/configs/esp32-core/smp/Make.defs new file mode 100644 index 0000000000..f8901d0f8b --- /dev/null +++ b/configs/esp32-core/smp/Make.defs @@ -0,0 +1,114 @@ +############################################################################ +# configs/esp32-core/nsh/Make.defs +# +# Copyright (C) 2016 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/xtensa/src/lx6/Toolchain.defs + +LDSCRIPT1 = $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/esp32_out.ld +LDSCRIPT2 = $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/esp32_common.ld +LDSCRIPT3 = $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/esp32_rom.ld +LDSCRIPT4 = $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/esp32_peripherals.ld + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(LDSCRIPT1)}" + ARCHSCRIPT += -T "${shell cygpath -w $(LDSCRIPT2)}" + ARCHSCRIPT += -T "${shell cygpath -w $(LDSCRIPT3)}" + ARCHSCRIPT += -T "${shell cygpath -w $(LDSCRIPT4)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(LDSCRIPT1) -T$(LDSCRIPT2) -T$(LDSCRIPT3) -T$(LDSCRIPT4) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin -ffunction-sections -fdata-sections -fstrict-volatile-bitfields -mlongcalls -MMD -MP +ARCHCXXFLAGS = $(ARCHCFLAGS) -fno-exceptions -fcheck-new -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +LDFLAGS += -nostartfiles -nodefaultlibs +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = + diff --git a/configs/esp32-core/smp/defconfig b/configs/esp32-core/smp/defconfig new file mode 100644 index 0000000000..104c7c89ba --- /dev/null +++ b/configs/esp32-core/smp/defconfig @@ -0,0 +1,803 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +CONFIG_BUILD_FLAT=y +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set +# CONFIG_ARCH_DEBUG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG_ALERT=y +# CONFIG_DEBUG_FEATURES is not set +# CONFIG_ARCH_HAVE_STACKCHECK is not set +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +# CONFIG_DEBUG_SYMBOLS is not set +# CONFIG_ARCH_HAVE_CUSTOMOPT is not set +# CONFIG_DEBUG_NOOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +# CONFIG_ARCH_ARM is not set +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_RISCV is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +CONFIG_ARCH_XTENSA=y +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="xtensa" +CONFIG_ARCH_CHIP="esp32" +# CONFIG_SERIAL_TERMIOS is not set +CONFIG_ARCH_CHIP_ESP32=y +CONFIG_ARCH_FAMILY_LX6=y +CONFIG_XTENSA_CALL0_ABI=y +# CONFIG_XTENSA_USE_OVLY is not set +CONFIG_XTENSA_CP_INITSET=0x0001 +CONFIG_ESP32_UART=y +# CONFIG_ESP32_SPI2 is not set +# CONFIG_XTENSA_TIMER1 is not set +# CONFIG_XTENSA_TIMER2 is not set +CONFIG_ESP32_UART0=y +# CONFIG_ESP32_UART1 is not set +# CONFIG_ESP32_UART2 is not set +CONFIG_ESP32_BT_RESERVE_DRAM=0 +CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0 +CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=0 +# CONFIG_ESP32_GPIO_IRQ is not set +CONFIG_ESP32_UART0_TXPIN=0 +CONFIG_ESP32_UART0_RXPIN=0 + +# +# ESP32 Peripheral Selection +# + +# +# Memory Configuration +# + +# +# UART configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +# CONFIG_ARCH_HAVE_IRQPRIO is not set +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +CONFIG_ARCH_HAVE_MULTICPU=y +# CONFIG_ARCH_HAVE_VFORK is not set +# CONFIG_ARCH_HAVE_MMU is not set +# CONFIG_ARCH_HAVE_MPU is not set +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +# CONFIG_ARCH_HAVE_RESET is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +# CONFIG_ARCH_HAVE_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +# CONFIG_ARCH_HAVE_INTERRUPTSTACK is not set +# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=114688 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_ESP32CORE=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="esp32-core" + +# +# Common Board Options +# + +# +# Board-Specific Options +# +# CONFIG_BOARD_CRASHDUMP is not set +# CONFIG_LIB_BOARDCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_ARCH_HAVE_TIMEKEEPING is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2011 +CONFIG_START_MONTH=12 +CONFIG_START_DAY=6 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=16 +CONFIG_WDOG_INTRESERVE=4 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +CONFIG_SPINLOCK=y +CONFIG_SMP=y +CONFIG_SMP_NCPUS=2 +CONFIG_SMP_IDLETHREAD_STACKSIZE=2048 +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=31 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_SCHED_HPWORK is not set +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +# CONFIG_LIB_SYSCALL is not set + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_URANDOM is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +# CONFIG_ARCH_HAVE_I2CRESET is not set +# CONFIG_I2C is not set +CONFIG_SPI=y +# CONFIG_SPI_SLAVE is not set +CONFIG_SPI_EXCHANGE=y +# CONFIG_SPI_CMDDATA is not set +# CONFIG_SPI_CALLBACK is not set +# CONFIG_SPI_HWFEATURES is not set +# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set +# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set +# CONFIG_ARCH_HAVE_SPI_BITORDER is not set +# CONFIG_SPI_CS_DELAY_CONTROL is not set +# CONFIG_SPI_DRIVER is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_ONESHOT is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set + +# +# IO Expander/GPIO Support +# +# CONFIG_IOEXPANDER is not set +# CONFIG_DEV_GPIO is not set + +# +# LCD Driver Support +# +# CONFIG_LCD is not set +# CONFIG_SLCD is not set + +# +# LED Support +# +# CONFIG_RGBLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_NCP5623C is not set +# CONFIG_MMCSD is not set +# CONFIG_MODEM is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_SERIAL_REMOVABLE is not set +CONFIG_SERIAL_CONSOLE=y +# CONFIG_16550_UART is not set +# CONFIG_UART_SERIALDRIVER is not set +CONFIG_UART0_SERIALDRIVER=y +# CONFIG_UART1_SERIALDRIVER is not set +# CONFIG_UART2_SERIALDRIVER is not set +# CONFIG_UART3_SERIALDRIVER is not set +# CONFIG_UART4_SERIALDRIVER is not set +# CONFIG_UART5_SERIALDRIVER is not set +# CONFIG_UART6_SERIALDRIVER is not set +# CONFIG_UART7_SERIALDRIVER is not set +# CONFIG_UART8_SERIALDRIVER is not set +# CONFIG_SCI0_SERIALDRIVER is not set +# CONFIG_SCI1_SERIALDRIVER is not set +# CONFIG_USART0_SERIALDRIVER is not set +# CONFIG_USART1_SERIALDRIVER is not set +# CONFIG_USART2_SERIALDRIVER is not set +# CONFIG_USART3_SERIALDRIVER is not set +# CONFIG_USART4_SERIALDRIVER is not set +# CONFIG_USART5_SERIALDRIVER is not set +# CONFIG_USART6_SERIALDRIVER is not set +# CONFIG_USART7_SERIALDRIVER is not set +# CONFIG_USART8_SERIALDRIVER is not set +# CONFIG_OTHER_UART_SERIALDRIVER is not set +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_UART0_DMA is not set +# CONFIG_PSEUDOTERM is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_HAVE_USBTRACE is not set +# CONFIG_DRIVERS_WIRELESS is not set +# CONFIG_DRIVERS_CONTACTLESS is not set + +# +# System Logging +# +# CONFIG_ARCH_SYSLOG is not set +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_INTBUFFER is not set +# CONFIG_SYSLOG_TIMESTAMP is not set +CONFIG_SYSLOG_SERIAL_CONSOLE=y +# CONFIG_SYSLOG_CHAR is not set +CONFIG_SYSLOG_CONSOLE=y +# CONFIG_SYSLOG_NONE is not set +# CONFIG_SYSLOG_FILE is not set +# CONFIG_SYSLOG_CHARDEV is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +CONFIG_FS_READABLE=y +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +CONFIG_FS_PROCFS=y +# CONFIG_FS_PROCFS_REGISTER is not set + +# +# Exclude individual procfs entries +# +# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set +# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set +# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set +# CONFIG_FS_UNIONFS is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=2 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Wireless Support +# + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +CONFIG_LIB_HOMEDIR="/" +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_IOCTL_VARIADIC is not set +# CONFIG_LIBC_WCHAR is not set +# CONFIG_LIBC_LOCALE is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set +# CONFIG_ARCH_HAVE_TLS is not set +# CONFIG_LIBC_NETDB is not set +# CONFIG_NETDB_HOSTFILE is not set + +# +# Non-standard Library Support +# +# CONFIG_LIB_CRC64_FAST is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set +# CONFIG_LIB_HEX2BIN is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_CCTYPE is not set +# CONFIG_EXAMPLES_CHAT is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PCA9635 is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_RFID_READUID is not set +# CONFIG_EXAMPLES_RGBLED is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +CONFIG_EXAMPLES_SMP=y +CONFIG_EXAMPLES_SMP_NBARRIER_THREADS=8 +CONFIG_EXAMPLES_SMP_PRIORITY=100 +CONFIG_EXAMPLES_SMP_STACKSIZE=2048 +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WEBSERVER is not set + +# +# File System Utilities +# +# CONFIG_FSUTILS_INIFILE is not set +# CONFIG_FSUTILS_PASSWD is not set + +# +# GPS Utilities +# +# CONFIG_GPSUTILS_MINMEA_LIB is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_BAS is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set +# CONFIG_INTERPRETERS_MINIBASIC is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_ESP8266 is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +# CONFIG_NSH_MOTD is not set + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_BASENAME is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +# CONFIG_NSH_DISABLE_DD is not set +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_DIRNAME is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +# CONFIG_NSH_DISABLE_GET is not set +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +# CONFIG_NSH_DISABLE_IFUPDOWN is not set +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +# CONFIG_NSH_DISABLE_MKRD is not set +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_PRINTF=y +# CONFIG_NSH_DISABLE_PS is not set +# CONFIG_NSH_DISABLE_PUT is not set +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TIME is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +# CONFIG_NSH_DISABLE_WGET is not set +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +# CONFIG_NSH_CMDOPT_HEXDUMP is not set +CONFIG_NSH_PROC_MOUNTPOINT="/proc" +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set +# CONFIG_NSH_LOGIN is not set +# CONFIG_NSH_CONSOLE_LOGIN is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_READLINE_TABCOMPLETION is not set +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_SYSTEM is not set +# CONFIG_SYSTEM_TEE is not set +# CONFIG_SYSTEM_UBLOXMODEM is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/esp32-core/smp/setenv.sh b/configs/esp32-core/smp/setenv.sh new file mode 100755 index 0000000000..3c57c18b55 --- /dev/null +++ b/configs/esp32-core/smp/setenv.sh @@ -0,0 +1,57 @@ +#!/bin/bash +# configs/esp32-core/nsh/setenv.sh +# +# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the path to the location where I installed the Expressif crosstools-NG +# toolchaing +export TOOLCHAIN_BIN="/home/patacongo/projects/nuttx/crosstool-NG/builds/xtensa-esp32-elf/bin" + +# Add the path to the toolchain to the PATH variable +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}" diff --git a/sched/Kconfig b/sched/Kconfig index b10d3e3caf..d06143d7d5 100644 --- a/sched/Kconfig +++ b/sched/Kconfig @@ -257,7 +257,7 @@ config SPINLOCK config SMP bool "Symmetric Multi-Processing (SMP)" default n - depends on ARCH_HAVE_MULTICPU && EXPERIMENTAL + depends on ARCH_HAVE_MULTICPU select SPINLOCK ---help--- Enables support for Symmetric Multi-Processing (SMP) on a multi-CPU