sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Updates for PIC32MX USB driver

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4233 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2011-12-27 20:07:17 +00:00
parent 61b0896f3d
commit 4c5d18d561
9 changed files with 408 additions and 331 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
ChangeLog
View File

@ -2300,3 +2300,6 @@
6.14 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
* tools/Makefile.txport, mkexport.sh, and configure.sh. Changes submitted
by Mike Smith to support configuration and 'make export' on MAC OS.

10
TODO
View File

@ -1,4 +1,4 @@
NuttX TODO List (Last updated December 20, 2011)
NuttX TODO List (Last updated December 27, 2011)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This file summarizes known NuttX bugs, limitations, inconsistencies with
@ -31,7 +31,7 @@ nuttx/
(2) ARM/LPC313x (arch/arm/src/lpc313x/)
(3) ARM/STR71x (arch/arm/src/str71x/)
(3) ARM/LM3S6918 (arch/arm/src/lm3s/)
(4) ARM/STM32 (arch/arm/src/stm32/)
(5) ARM/STM32 (arch/arm/src/stm32/)
(3) AVR (arch/avr)
(0) Intel x86 (arch/x86)
(4) 8051 / MCS51 (arch/8051/)
@ -1072,6 +1072,12 @@ o ARM/STM32 (arch/arm/src/stm32/)
Priority: Low until someone needs DMA1, Channel 5 (ADC3, UART4_TX, TIM5_CH1, or
TIM8_CH2).
Title: UNFINISHED DRIVERS
Description: The following drivers are incomplete: DAC. The following drivers
are untested: DMA on the F4, CAN.
Status: Open
Priority: Medium
o AVR (arch/avr)
^^^^^^^^^^^^^^

4
arch/mips/src/pic32mx/pic32mx-internal.h
View File

@ -57,7 +57,7 @@
/* GPIO settings used in the configport, readport, writeport, etc.
*
* General encoding:
* MMxV Ixxx RRRx PPPP
* MMxV IIxx RRRx PPPP
*/
#define GPIO_MODE_SHIFT (14) /* Bits 14-15: I/O mode */
@ -70,7 +70,7 @@
# define GPIO_VALUE_ONE (1 << 12)
# define GPIO_VALUE_ZERO (0)
#define GPIO_INT_SHIFT (14) /* Bits 10-11: Interrupt mode */
#define GPIO_INT_SHIFT (10) /* Bits 10-11: Interrupt mode */
#define GPIO_INT_MASK (3 << GPIO_INT_SHIFT)
# define GPIO_INT_NONE (0 << GPIO_INT_SHIFT) /* Bit 00: No interrupt */
# define GPIO_INT (1 << GPIO_INT_SHIFT) /* Bit 01: Change notification enable */

663
arch/mips/src/pic32mx/pic32mx-usbotg.h
View File

@ -1,313 +1,350 @@
/************************************************************************************
* arch/mips/src/pic32mx/pic32mx-usbotg.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H
#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "pic32mx-memorymap.h"
/************************************************************************************
* Pre-Processor Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define PIC32MX_USBOTG_IR_OFFSET 0x0040 /* USB OTG Interrupt Flags Register */
#define PIC32MX_USBOTG_IE_OFFSET 0x0050 /* USB OTG Interrupt Enable Register */
#define PIC32MX_USBOTG_STAT_OFFSET 0x0060 /* USB Comparator and Pin Status Register */
#define PIC32MX_USBOTG_CON_OFFSET 0x0070 /* USB Resistor and Pin Control Register */
#define PIC32MX_USB_PWRC_OFFSET 0x0080 /* USB Power Control Register */
#define PIC32MX_USB_IR_OFFSET 0x0200 /* USB Pending Interrupt Register */
#define PIC32MX_USB_IE_OFFSET 0x0210 /* USB Interrupt Enable Register */
#define PIC32MX_USB_EIR_OFFSET 0x0220 /* USB Pending Error Interrupt Register */
#define PIC32MX_USB_EIE_OFFSET 0x0230 /* USB Interrupt Error Enable Register */
#define PIC32MX_USB_STAT_OFFSET 0x0240 /* USB Status FIFO Register */
#define PIC32MX_USB_CON_OFFSET 0x0250 /* USB Module Control Register */
#define PIC32MX_USB_ADDR_OFFSET 0x0260 /* USB Address Register */
#define PIC32MX_USB_FRMH_OFFSET 0x0290 /* USB Frame Counter Register (high) */
#define PIC32MX_USB_FRML_OFFSET 0x0280 /* USB Frame Counter Register (low) */
#define PIC32MX_USB_TOK_OFFSET 0x02a0 /* USB Host Control Register */
#define PIC32MX_USB_SOF_OFFSET 0x02b0 /* USB SOF Counter Register */
#define PIC32MX_USB_BDTP1_OFFSET 0x0270 /* USB Buffer Descriptor Table Pointer Register 1 */
#define PIC32MX_USB_BDTP2_OFFSET 0x02c0 /* USB Buffer Descriptor Table Pointer Register 2 */
#define PIC32MX_USB_BDTP3_OFFSET 0x02d0 /* USB Buffer Descriptor Table Pointer Register 3 */
#define PIC32MX_USB_CNFG1_OFFSET 0x02e0 /* USB Debug and Idle Register */
#define PIC32MX_USB_EP_OFFSET(n) 0x0300 /* USB Endpoint n Control Register */
#define PIC32MX_USB_EP0_OFFSET 0x0300 /* USB Endpoint 0 Control Register */
#define PIC32MX_USB_EP1_OFFSET 0x0310 /* USB Endpoint 1 Control Register */
#define PIC32MX_USB_EP2_OFFSET 0x0320 /* USB Endpoint 2 Control Register */
#define PIC32MX_USB_EP3_OFFSET 0x0330 /* USB Endpoint 3 Control Register */
#define PIC32MX_USB_EP4_OFFSET 0x0340 /* USB Endpoint 4 Control Register */
#define PIC32MX_USB_EP5_OFFSET 0x0350 /* USB Endpoint 5 Control Register */
#define PIC32MX_USB_EP6_OFFSET 0x0360 /* USB Endpoint 6 Control Register */
#define PIC32MX_USB_EP7_OFFSET 0x0370 /* USB Endpoint 7 Control Register */
#define PIC32MX_USB_EP8_OFFSET 0x0380 /* USB Endpoint 8 Control Register */
#define PIC32MX_USB_EP9_OFFSET 0x0390 /* USB Endpoint 9 Control Register */
#define PIC32MX_USB_EP10_OFFSET 0x03a0 /* USB Endpoint 10 Control Register */
#define PIC32MX_USB_EP11_OFFSET 0x03b0 /* USB Endpoint 11 Control Register */
#define PIC32MX_USB_EP12_OFFSET 0x03c0 /* USB Endpoint 12 Control Register */
#define PIC32MX_USB_EP13_OFFSET 0x03d0 /* USB Endpoint 13 Control Register */
#define PIC32MX_USB_EP14_OFFSET 0x03e0 /* USB Endpoint 14 Control Register */
#define PIC32MX_USB_EP15_OFFSET 0x03f0 /* USB Endpoint 15 Control Register */
/* Register Addresses ***************************************************************/
#define PIC32MX_USBOTG_IR (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IR_OFFSET)
#define PIC32MX_USBOTG_IE (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IE_OFFSET)
#define PIC32MX_USBOTG_STAT (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_STAT_OFFSET)
#define PIC32MX_USBOTG_CON (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_CON_OFFSET)
#define PIC32MX_USB_PWRC (PIC32MX_USB_K1BASE+PIC32MX_USB_PWRC_OFFSET)
#define PIC32MX_USB_IR (PIC32MX_USB_K1BASE+PIC32MX_USB_IR_OFFSET)
#define PIC32MX_USB_IE (PIC32MX_USB_K1BASE+PIC32MX_USB_IE_OFFSET)
#define PIC32MX_USB_EIR (PIC32MX_USB_K1BASE+PIC32MX_USB_EIR_OFFSET)
#define PIC32MX_USB_EIE (PIC32MX_USB_K1BASE+PIC32MX_USB_EIE_OFFSET)
#define PIC32MX_USB_STAT (PIC32MX_USB_K1BASE+PIC32MX_USB_STAT_OFFSET)
#define PIC32MX_USB_CON (PIC32MX_USB_K1BASE+PIC32MX_USB_CON_OFFSET)
#define PIC32MX_USB_ADDR (PIC32MX_USB_K1BASE+PIC32MX_USB_ADDR_OFFSET)
#define PIC32MX_USB_FRMH (PIC32MX_USB_K1BASE+PIC32MX_USB_FRMH_OFFSET)
#define PIC32MX_USB_FRML (PIC32MX_USB_K1BASE+PIC32MX_USB_FRML_OFFSET)
#define PIC32MX_USB_TOK (PIC32MX_USB_K1BASE+PIC32MX_USB_TOK_OFFSET)
#define PIC32MX_USB_SOF (PIC32MX_USB_K1BASE+PIC32MX_USB_SOF_OFFSET)
#define PIC32MX_USB_BDTP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP1_OFFSET)
#define PIC32MX_USB_BDTP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP2_OFFSET)
#define PIC32MX_USB_BDTP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP3_OFFSET)
#define PIC32MX_USB_CNFG1 (PIC32MX_USB_K1BASE+PIC32MX_USB_CNFG1_OFFSET)
#define PIC32MX_USB_EP(n) (PIC32MX_USB_K1BASE+PIC32MX_USB_EP_OFFSET(n))
#define PIC32MX_USB_EP0 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP0_OFFSET)
#define PIC32MX_USB_EP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP1_OFFSET)
#define PIC32MX_USB_EP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP2_OFFSET)
#define PIC32MX_USB_EP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP3_OFFSET)
#define PIC32MX_USB_EP4 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP4_OFFSET)
#define PIC32MX_USB_EP5 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP5_OFFSET)
#define PIC32MX_USB_EP6 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP6_OFFSET)
#define PIC32MX_USB_EP7 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP7_OFFSET)
#define PIC32MX_USB_EP8 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP8_OFFSET)
#define PIC32MX_USB_EP9 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP9_OFFSET)
#define PIC32MX_USB_EP10 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP10_OFFSET)
#define PIC32MX_USB_EP11 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP11_OFFSET)
#define PIC32MX_USB_EP12 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP12_OFFSET)
#define PIC32MX_USB_EP13 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP13_OFFSET)
#define PIC32MX_USB_EP14 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP14_OFFSET)
#define PIC32MX_USB_EP15 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP15_OFFSET)
/* Register Bit-Field Definitions ***************************************************/
/* USB OTG Interrupt Flags Register */
/* USB OTG Interrupt Enable Register */
#define USBOTG_INT_VBUSVD (1 << 0) /* Bit 0: A-Device VBUS Change Indicator */
#define USBOTG_INT_SESEND (1 << 2) /* Bit 2: B-Device VBUS Change Indicator */
#define USBOTG_INT_ACTV (1 << 4) /* Bit 4: Bus Activity Indicator */
#define USBOTG_INT_SESVD (1 << 3) /* Bit 3: Session Valid Change Indicator */
#define USBOTG_INT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */
#define USBOTG_INT_T1MSEC (1 << 6) /* Bit 6: 1 Millisecond Timer */
#define USBOTG_INT_ID (1 << 7) /* Bit 7: ID State Change Indicator */
/* USB Comparator and Pin Status Register */
#define USBOTG_STAT_VBUSVD (1 << 0) /* Bit 0: A-VBUS Valid Indicator */
#define USBOTG_STAT_SESEND (1 << 2) /* Bit 2: B-Session End Indicator */
#define USBOTG_STAT_SESVD (1 << 3) /* Bit 3: Session Valid Indicator */
#define USBOTG_STAT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */
#define USBOTG_STAT_ID (1 << 7) /* Bit 7: ID Pin State Indicator */
/* USB Resistor and Pin Control Register */
#define USBOTG_CON_VBUSDIS (1 << 0) /* Bit 0: VBUS Discharge Enable */
#define USBOTG_CON_VBUSCHG (1 << 1) /* Bit 1: VBUS Charge Enable */
#define USBOTG_CON_OTGEN (1 << 2) /* Bit 2: OTG Functionality Enable */
#define USBOTG_CON_VBUSON (1 << 3) /* Bit 3: VBUS Power-on */
#define USBOTG_CON_DMPULDWN (1 << 4) /* Bit 4: D- Pull-Down Enable */
#define USBOTG_CON_DPPULDWN (1 << 5) /* Bit 5: D+ Pull-Down Enable */
#define USBOTG_CON_DMPULUP (1 << 6) /* Bit 6: D- Pull-Up Enable */
#define USBOTG_CON_DPPULUP (1 << 7) /* Bit 7: D+ Pull-Up Enable */
/* USB Power Control Register */
#define USB_PWRC_USBPWR (1 << 0) /* Bit 0: USB Operation Enable */
#define USB_PWRC_USUSPEND (1 << 1) /* Bit 1: USB Suspend Mode */
#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7)
# define USB_PWRC_USBBUSY (1 << 3) /* Bit 3: USB Module Busy */
#endif
#define USB_PWRC_USLPGRD (1 << 4) /* Bit 4: USB Sleep Entry Guard */
#define USB_PWRC_UACTPND (1 << 7) /* Bit 7: USB Activity Pending */
/* USB Pending Interrupt Register */
/* USB Interrupt Enable Register */
#define USB_INT_URST (1 << 0) /* Bit 0: USB Reset Interrupt (Device mode) */
#define USB_INT_DETACH (1 << 0) /* Bit 0: USB Detach Interrupt (Host mode) */
#define USB_INT_UERR (1 << 1) /* Bit 1: USB Error Condition Interrupt */
#define USB_INT_SOF (1 << 2) /* Bit 2: SOF Token Interrupt */
#define USB_INT_TRN (1 << 3) /* Bit 3: Token Processing Complete Interrupt */
#define USB_INT_IDLE (1 << 4) /* Bit 4 : Idle Detect Interrupt */
#define USB_INT_RESUME (1 << 5) /* Bit 5: Resume Interrupt */
#define USB_INT_ATTACH (1 << 6) /* Bit 6: Peripheral Attach Interrupt */
#define USB_INT_STALL (1 << 7) /* Bit 7: STALL Handshake Interrupt */
/* USB Pending Error Interrupt Register */
/* USB Interrupt Error Enable Register */
#define USB_EINT_PID (1 << 0) /* Bit 0: PID Check Failure Flag */
#define USB_EINT_CRC5 (1 << 1) /* Bit 1: CRC5 Host Error Flag */
#define USB_EINT_EOF (1 << 1) /* Bit 1: EOF Error Flag */
#define USB_EINT_CRC16 (1 << 2) /* Bit 2: CRC16 Failure Flag */
#define USB_EINT_DFN8 (1 << 3) /* Bit 3: Data Field Size Error Flag */
#define USB_EINT_BTO (1 << 4) /* Bit 4: Bus Turnaround Time-Out Error Flag */
#define USB_EINT_DMA (1 << 5) /* Bit 5: DMA Error Flag */
#define USB_EINT_BMX (1 << 6) /* Bit 6: Bus Matrix Error Flag */
#define USB_EINT_BTS (1 << 7) /* Bit 7: Bit Stuff Error Flag */
/* USB Status FIFO Register */
#define USB_STAT_PPBI (1 << 2) /* Bit 2: Ping-Pong BD Pointer Indicator */
#define USB_STAT_DIR (1 << 3) /* Bit 3: Last BD Direction Indicator */
#define USB_STAT_ENDPT_SHIFT (4) /* Bits 4-7: Encoded Endpoint Activity */
#define USB_STAT_ENDPT_MASK (15 << USB_STAT_ENDPT_SHIFT)
# define USB_STAT_ENDPT(n) ((n) << USB_STAT_ENDPT_SHIFT) /* Endpoint n, n=0..15 */
/* USB Module Control Register */
#define USB_CON_USBEN (1 << 0) /* Bit 0: USB Module Enable */
#define USB_CON_SOFEN (1 << 0) /* Bit 0: SOF Enable */
#define USB_CON_PPBRST (1 << 1) /* Bit 1: Ping-Pong Buffers Reset */
#define USB_CON_RESUME (1 << 2) /* Bit 2: RESUME Signaling Enable */
#define USB_CON_HOSTEN (1 << 3) /* Bit 3: Host Mode Enable */
#define USB_CON_USBRST (1 << 4) /* Bit 4: Module Reset */
#define USB_CON_PKTDIS (1 << 5) /* Bit 5: Packet Transfer Disable */
#define USB_CON_TOKBUSY (1 << 5) /* Bit 5: Token Busy Indicator */
#define USB_CON_SE0 (1 << 6) /* Bit 6: Live Single-Ended Zero flag */
#define USB_CON_JSTATE (1 << 7) /* Bit 7: Live Differential Receiver JSTATE flag */
/* USB Address Register */
#define USB_ADDR_DEVADDR_SHIFT (0) /* Bit 0-6: 7-bit USB Device Address */
#define USB_ADDR_DEVADDR_MASK (0x7f << USB_ADDR_DEVADDR_SHIFT)
#define USB_ADDR_LSPDEN (1 << 7) /* Bit 7: Low Speed Enable Indicator */
/* USB Frame Counter Register (high) */
#define USB_FRMH_MASK 0x07 /* Bits 0-2: 11-bit frame number upper 3 bits */
/* USB Frame Counter Register (low) */
#define USB_FRML_MASK 0xff /* Bits 0-7: 11-bit frame number lower 8 bits */
/* USB Host Control Register */
#define USB_TOK_PID_SHIFT (4) /* Bits 4-7: Token Type Indicator */
#define USB_TOK_PID_MASK (15 << USB_TOK_PID_SHIFT)
# define USB_TOK_PID_OUT (1 << USB_TOK_PID_SHIFT) /* OUT (TX) token type transaction */
# define USB_TOK_PID_IN (9 << USB_TOK_PID_SHIFT) /* IN (RX) token type transaction */
# define USB_TOK_PID_SETUP (13 << USB_TOK_PID_SHIFT) /* SETUP (TX) token type transaction */
#define USB_TOK_EP_SHIFT (0) /* Bits 0-3: Token Command Endpoint Address */
#define USB_TOK_EP_MASK (15 << USB_TOK_EP_SHIFT)
/* USB SOF Counter Register */
#define USB_SOF_SHIFT (0) /* Bits 0-7: SOF Threshold Value */
#define USB_SOF_MASK (0xff << USB_SOF_SHIFT)
# define USB_SOF_8BTYE (0x12 << USB_SOF_SHIFT) /* 8-byte packet */
# define USB_SOF_16BTYE (0x1a << USB_SOF_SHIFT) /* 16-byte packet */
# define USB_SOF_32BTYE (0x2a << USB_SOF_SHIFT) /* 32-byte packet */
# define USB_SOF_64BTYE (0x4a << USB_SOF_SHIFT) /* 64-byte packet */
/* USB Buffer Descriptor Table Pointer Register 1 */
#define USB_BDTP1_MASK 0x7e /* Bits 1-7: BDT Base Address bits 9-15 */
/* USB Buffer Descriptor Table Pointer Register 2 */
#define USB_BDTP2_MASK 0xff /* Bits 0-7: BDT Base Address bits 16-23 */
/* USB Buffer Descriptor Table Pointer Register 3 */
#define USB_BDTP3_MASK 0xff /* Bits 0-7: BDT Base Address bits 24-31 */
/* USB Debug and Idle Register */
#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7)
# define USB_CNFG1_UASUSPND (1 << 0) /* Bit 0: Automatic Suspend Enable */
#endif
#define USB_CNFG1_USBSIDL (1 << 4) /* Bit 4: Stop in Idle Mode */
#define USB_CNFG1_USBFRZ (1 << 5) /* Bit 5: Freeze in Debug Mode */
#define USB_CNFG1_UOEMON (1 << 6) /* Bit 6: USB OE Monitor Enable */
#define USB_CNFG1_UTEYE (1 << 7) /* Bit 7: USB Eye-Pattern Test Enable */
/* USB Endpoint Control Register */
#define USB_EP_EPHSHK (1 << 0) /* Bit 0: Endpoint Handshake Enable */
#define USB_EP_EPSTALL (1 << 1) /* Bit 1: Endpoint Stall Status */
#define USB_EP_EPRXEN (1 << 3) /* Bit 3: Endpoint Receive Enable */
#define USB_EP_EPTXEN (1 << 2) /* Bit 2: Endpoint Transmit Enable */
#define USB_EP_EPCONDIS (1 << 4) /* Bit 4: Bidirectional Endpoint Control */
#define USB_EP_RETRYDIS (1 << 6) /* Bit 6: Retry Disable (Host mode and U1EP0 only) */
#define USB_EP_LSPD (1 << 7) /* Bit 7: Low-Speed Direct Connection Enable */
/************************************************************************************
* Public Types
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Inline Functions
************************************************************************************/
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H */
/************************************************************************************
* arch/mips/src/pic32mx/pic32mx-usbotg.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H
#define __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include "pic32mx-memorymap.h"
/************************************************************************************
* Pre-Processor Definitions
************************************************************************************/
/* Register Offsets *****************************************************************/
#define PIC32MX_USBOTG_IR_OFFSET 0x0040 /* USB OTG Interrupt Flags Register */
#define PIC32MX_USBOTG_IE_OFFSET 0x0050 /* USB OTG Interrupt Enable Register */
#define PIC32MX_USBOTG_STAT_OFFSET 0x0060 /* USB Comparator and Pin Status Register */
#define PIC32MX_USBOTG_CON_OFFSET 0x0070 /* USB Resistor and Pin Control Register */
#define PIC32MX_USB_PWRC_OFFSET 0x0080 /* USB Power Control Register */
#define PIC32MX_USB_IR_OFFSET 0x0200 /* USB Pending Interrupt Register */
#define PIC32MX_USB_IE_OFFSET 0x0210 /* USB Interrupt Enable Register */
#define PIC32MX_USB_EIR_OFFSET 0x0220 /* USB Pending Error Interrupt Register */
#define PIC32MX_USB_EIE_OFFSET 0x0230 /* USB Interrupt Error Enable Register */
#define PIC32MX_USB_STAT_OFFSET 0x0240 /* USB Status FIFO Register */
#define PIC32MX_USB_CON_OFFSET 0x0250 /* USB Module Control Register */
#define PIC32MX_USB_ADDR_OFFSET 0x0260 /* USB Address Register */
#define PIC32MX_USB_FRMH_OFFSET 0x0290 /* USB Frame Counter Register (high) */
#define PIC32MX_USB_FRML_OFFSET 0x0280 /* USB Frame Counter Register (low) */
#define PIC32MX_USB_TOK_OFFSET 0x02a0 /* USB Host Control Register */
#define PIC32MX_USB_SOF_OFFSET 0x02b0 /* USB SOF Counter Register */
#define PIC32MX_USB_BDTP1_OFFSET 0x0270 /* USB Buffer Descriptor Table Pointer Register 1 */
#define PIC32MX_USB_BDTP2_OFFSET 0x02c0 /* USB Buffer Descriptor Table Pointer Register 2 */
#define PIC32MX_USB_BDTP3_OFFSET 0x02d0 /* USB Buffer Descriptor Table Pointer Register 3 */
#define PIC32MX_USB_CNFG1_OFFSET 0x02e0 /* USB Debug and Idle Register */
#define PIC32MX_USB_EP_OFFSET(n) (0x0300+((n)<<4))
#define PIC32MX_USB_EP0_OFFSET 0x0300 /* USB Endpoint 0 Control Register */
#define PIC32MX_USB_EP1_OFFSET 0x0310 /* USB Endpoint 1 Control Register */
#define PIC32MX_USB_EP2_OFFSET 0x0320 /* USB Endpoint 2 Control Register */
#define PIC32MX_USB_EP3_OFFSET 0x0330 /* USB Endpoint 3 Control Register */
#define PIC32MX_USB_EP4_OFFSET 0x0340 /* USB Endpoint 4 Control Register */
#define PIC32MX_USB_EP5_OFFSET 0x0350 /* USB Endpoint 5 Control Register */
#define PIC32MX_USB_EP6_OFFSET 0x0360 /* USB Endpoint 6 Control Register */
#define PIC32MX_USB_EP7_OFFSET 0x0370 /* USB Endpoint 7 Control Register */
#define PIC32MX_USB_EP8_OFFSET 0x0380 /* USB Endpoint 8 Control Register */
#define PIC32MX_USB_EP9_OFFSET 0x0390 /* USB Endpoint 9 Control Register */
#define PIC32MX_USB_EP10_OFFSET 0x03a0 /* USB Endpoint 10 Control Register */
#define PIC32MX_USB_EP11_OFFSET 0x03b0 /* USB Endpoint 11 Control Register */
#define PIC32MX_USB_EP12_OFFSET 0x03c0 /* USB Endpoint 12 Control Register */
#define PIC32MX_USB_EP13_OFFSET 0x03d0 /* USB Endpoint 13 Control Register */
#define PIC32MX_USB_EP14_OFFSET 0x03e0 /* USB Endpoint 14 Control Register */
#define PIC32MX_USB_EP15_OFFSET 0x03f0 /* USB Endpoint 15 Control Register */
/* Register Addresses ***************************************************************/
#define PIC32MX_USBOTG_IR (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IR_OFFSET)
#define PIC32MX_USBOTG_IE (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_IE_OFFSET)
#define PIC32MX_USBOTG_STAT (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_STAT_OFFSET)
#define PIC32MX_USBOTG_CON (PIC32MX_USB_K1BASE+PIC32MX_USBOTG_CON_OFFSET)
#define PIC32MX_USB_PWRC (PIC32MX_USB_K1BASE+PIC32MX_USB_PWRC_OFFSET)
#define PIC32MX_USB_IR (PIC32MX_USB_K1BASE+PIC32MX_USB_IR_OFFSET)
#define PIC32MX_USB_IE (PIC32MX_USB_K1BASE+PIC32MX_USB_IE_OFFSET)
#define PIC32MX_USB_EIR (PIC32MX_USB_K1BASE+PIC32MX_USB_EIR_OFFSET)
#define PIC32MX_USB_EIE (PIC32MX_USB_K1BASE+PIC32MX_USB_EIE_OFFSET)
#define PIC32MX_USB_STAT (PIC32MX_USB_K1BASE+PIC32MX_USB_STAT_OFFSET)
#define PIC32MX_USB_CON (PIC32MX_USB_K1BASE+PIC32MX_USB_CON_OFFSET)
#define PIC32MX_USB_ADDR (PIC32MX_USB_K1BASE+PIC32MX_USB_ADDR_OFFSET)
#define PIC32MX_USB_FRMH (PIC32MX_USB_K1BASE+PIC32MX_USB_FRMH_OFFSET)
#define PIC32MX_USB_FRML (PIC32MX_USB_K1BASE+PIC32MX_USB_FRML_OFFSET)
#define PIC32MX_USB_TOK (PIC32MX_USB_K1BASE+PIC32MX_USB_TOK_OFFSET)
#define PIC32MX_USB_SOF (PIC32MX_USB_K1BASE+PIC32MX_USB_SOF_OFFSET)
#define PIC32MX_USB_BDTP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP1_OFFSET)
#define PIC32MX_USB_BDTP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP2_OFFSET)
#define PIC32MX_USB_BDTP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_BDTP3_OFFSET)
#define PIC32MX_USB_CNFG1 (PIC32MX_USB_K1BASE+PIC32MX_USB_CNFG1_OFFSET)
#define PIC32MX_USB_EP(n) (PIC32MX_USB_K1BASE+PIC32MX_USB_EP_OFFSET(n))
#define PIC32MX_USB_EP0 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP0_OFFSET)
#define PIC32MX_USB_EP1 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP1_OFFSET)
#define PIC32MX_USB_EP2 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP2_OFFSET)
#define PIC32MX_USB_EP3 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP3_OFFSET)
#define PIC32MX_USB_EP4 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP4_OFFSET)
#define PIC32MX_USB_EP5 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP5_OFFSET)
#define PIC32MX_USB_EP6 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP6_OFFSET)
#define PIC32MX_USB_EP7 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP7_OFFSET)
#define PIC32MX_USB_EP8 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP8_OFFSET)
#define PIC32MX_USB_EP9 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP9_OFFSET)
#define PIC32MX_USB_EP10 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP10_OFFSET)
#define PIC32MX_USB_EP11 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP11_OFFSET)
#define PIC32MX_USB_EP12 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP12_OFFSET)
#define PIC32MX_USB_EP13 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP13_OFFSET)
#define PIC32MX_USB_EP14 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP14_OFFSET)
#define PIC32MX_USB_EP15 (PIC32MX_USB_K1BASE+PIC32MX_USB_EP15_OFFSET)
/* Register Bit-Field Definitions ***************************************************/
/* USB OTG Interrupt Flags Register */
/* USB OTG Interrupt Enable Register */
#define USBOTG_INT_VBUSVD (1 << 0) /* Bit 0: A-Device VBUS Change Indicator */
#define USBOTG_INT_SESEND (1 << 2) /* Bit 2: B-Device VBUS Change Indicator */
#define USBOTG_INT_ACTV (1 << 4) /* Bit 4: Bus Activity Indicator */
#define USBOTG_INT_SESVD (1 << 3) /* Bit 3: Session Valid Change Indicator */
#define USBOTG_INT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */
#define USBOTG_INT_T1MSEC (1 << 6) /* Bit 6: 1 Millisecond Timer */
#define USBOTG_INT_ID (1 << 7) /* Bit 7: ID State Change Indicator */
/* USB Comparator and Pin Status Register */
#define USBOTG_STAT_VBUSVD (1 << 0) /* Bit 0: A-VBUS Valid Indicator */
#define USBOTG_STAT_SESEND (1 << 2) /* Bit 2: B-Session End Indicator */
#define USBOTG_STAT_SESVD (1 << 3) /* Bit 3: Session Valid Indicator */
#define USBOTG_STAT_LSTATE (1 << 5) /* Bit 5: Line State Stable Indicator */
#define USBOTG_STAT_ID (1 << 7) /* Bit 7: ID Pin State Indicator */
/* USB Resistor and Pin Control Register */
#define USBOTG_CON_VBUSDIS (1 << 0) /* Bit 0: VBUS Discharge Enable */
#define USBOTG_CON_VBUSCHG (1 << 1) /* Bit 1: VBUS Charge Enable */
#define USBOTG_CON_OTGEN (1 << 2) /* Bit 2: OTG Functionality Enable */
#define USBOTG_CON_VBUSON (1 << 3) /* Bit 3: VBUS Power-on */
#define USBOTG_CON_DMPULDWN (1 << 4) /* Bit 4: D- Pull-Down Enable */
#define USBOTG_CON_DPPULDWN (1 << 5) /* Bit 5: D+ Pull-Down Enable */
#define USBOTG_CON_DMPULUP (1 << 6) /* Bit 6: D- Pull-Up Enable */
#define USBOTG_CON_DPPULUP (1 << 7) /* Bit 7: D+ Pull-Up Enable */
/* USB Power Control Register */
#define USB_PWRC_USBPWR (1 << 0) /* Bit 0: USB Operation Enable */
#define USB_PWRC_USUSPEND (1 << 1) /* Bit 1: USB Suspend Mode */
#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7)
# define USB_PWRC_USBBUSY (1 << 3) /* Bit 3: USB Module Busy */
#endif
#define USB_PWRC_USLPGRD (1 << 4) /* Bit 4: USB Sleep Entry Guard */
#define USB_PWRC_UACTPND (1 << 7) /* Bit 7: USB Activity Pending */
/* USB Pending Interrupt Register */
/* USB Interrupt Enable Register */
#define USB_INT_URST (1 << 0) /* Bit 0: USB Reset Interrupt (Device mode) */
#define USB_INT_DETACH (1 << 0) /* Bit 0: USB Detach Interrupt (Host mode) */
#define USB_INT_UERR (1 << 1) /* Bit 1: USB Error Condition Interrupt */
#define USB_INT_SOF (1 << 2) /* Bit 2: SOF Token Interrupt */
#define USB_INT_TRN (1 << 3) /* Bit 3: Token Processing Complete Interrupt */
#define USB_INT_IDLE (1 << 4) /* Bit 4 : Idle Detect Interrupt */
#define USB_INT_RESUME (1 << 5) /* Bit 5: Resume Interrupt */
#define USB_INT_ATTACH (1 << 6) /* Bit 6: Peripheral Attach Interrupt */
#define USB_INT_STALL (1 << 7) /* Bit 7: STALL Handshake Interrupt */
#define USB_INT_ALL 0xff
/* USB Pending Error Interrupt Register */
/* USB Interrupt Error Enable Register */
#define USB_EINT_PID (1 << 0) /* Bit 0: PID Check Failure Flag */
#define USB_EINT_CRC5 (1 << 1) /* Bit 1: CRC5 Host Error Flag */
#define USB_EINT_EOF (1 << 1) /* Bit 1: EOF Error Flag */
#define USB_EINT_CRC16 (1 << 2) /* Bit 2: CRC16 Failure Flag */
#define USB_EINT_DFN8 (1 << 3) /* Bit 3: Data Field Size Error Flag */
#define USB_EINT_BTO (1 << 4) /* Bit 4: Bus Turnaround Time-Out Error Flag */
#define USB_EINT_DMA (1 << 5) /* Bit 5: DMA Error Flag */
#define USB_EINT_BMX (1 << 6) /* Bit 6: Bus Matrix Error Flag */
#define USB_EINT_BTS (1 << 7) /* Bit 7: Bit Stuff Error Flag */
#define USB_EINT_ALL 0xff
/* USB Status FIFO Register */
#define USB_STAT_PPBI (1 << 2) /* Bit 2: Ping-Pong BD Pointer Indicator */
#define USB_STAT_DIR (1 << 3) /* Bit 3: Last BD Direction Indicator */
#define USB_STAT_ENDPT_SHIFT (4) /* Bits 4-7: Encoded Endpoint Activity */
#define USB_STAT_ENDPT_MASK (15 << USB_STAT_ENDPT_SHIFT)
# define USB_STAT_ENDPT(n) ((n) << USB_STAT_ENDPT_SHIFT) /* Endpoint n, n=0..15 */
/* USB Module Control Register */
#define USB_CON_USBEN (1 << 0) /* Bit 0: USB Module Enable */
#define USB_CON_SOFEN (1 << 0) /* Bit 0: SOF Enable */
#define USB_CON_PPBRST (1 << 1) /* Bit 1: Ping-Pong Buffers Reset */
#define USB_CON_RESUME (1 << 2) /* Bit 2: RESUME Signaling Enable */
#define USB_CON_HOSTEN (1 << 3) /* Bit 3: Host Mode Enable */
#define USB_CON_USBRST (1 << 4) /* Bit 4: Module Reset */
#define USB_CON_PKTDIS (1 << 5) /* Bit 5: Packet Transfer Disable */
#define USB_CON_TOKBUSY (1 << 5) /* Bit 5: Token Busy Indicator */
#define USB_CON_SE0 (1 << 6) /* Bit 6: Live Single-Ended Zero flag */
#define USB_CON_JSTATE (1 << 7) /* Bit 7: Live Differential Receiver JSTATE flag */
/* USB Address Register */
#define USB_ADDR_DEVADDR_SHIFT (0) /* Bit 0-6: 7-bit USB Device Address */
#define USB_ADDR_DEVADDR_MASK (0x7f << USB_ADDR_DEVADDR_SHIFT)
#define USB_ADDR_LSPDEN (1 << 7) /* Bit 7: Low Speed Enable Indicator */
/* USB Frame Counter Register (high) */
#define USB_FRMH_MASK 0x07 /* Bits 0-2: 11-bit frame number upper 3 bits */
/* USB Frame Counter Register (low) */
#define USB_FRML_MASK 0xff /* Bits 0-7: 11-bit frame number lower 8 bits */
/* USB Host Control Register */
#define USB_TOK_PID_SHIFT (4) /* Bits 4-7: Token Type Indicator */
#define USB_TOK_PID_MASK (15 << USB_TOK_PID_SHIFT)
# define USB_TOK_PID_OUT (1 << USB_TOK_PID_SHIFT) /* OUT (TX) token type transaction */
# define USB_TOK_PID_IN (9 << USB_TOK_PID_SHIFT) /* IN (RX) token type transaction */
# define USB_TOK_PID_SETUP (13 << USB_TOK_PID_SHIFT) /* SETUP (TX) token type transaction */
#define USB_TOK_EP_SHIFT (0) /* Bits 0-3: Token Command Endpoint Address */
#define USB_TOK_EP_MASK (15 << USB_TOK_EP_SHIFT)
/* USB SOF Counter Register */
#define USB_SOF_SHIFT (0) /* Bits 0-7: SOF Threshold Value */
#define USB_SOF_MASK (0xff << USB_SOF_SHIFT)
# define USB_SOF_8BTYE (0x12 << USB_SOF_SHIFT) /* 8-byte packet */
# define USB_SOF_16BTYE (0x1a << USB_SOF_SHIFT) /* 16-byte packet */
# define USB_SOF_32BTYE (0x2a << USB_SOF_SHIFT) /* 32-byte packet */
# define USB_SOF_64BTYE (0x4a << USB_SOF_SHIFT) /* 64-byte packet */
/* USB Buffer Descriptor Table Pointer Register 1 */
#define USB_BDTP1_MASK 0x7e /* Bits 1-7: BDT Base Address bits 9-15 */
/* USB Buffer Descriptor Table Pointer Register 2 */
#define USB_BDTP2_MASK 0xff /* Bits 0-7: BDT Base Address bits 16-23 */
/* USB Buffer Descriptor Table Pointer Register 3 */
#define USB_BDTP3_MASK 0xff /* Bits 0-7: BDT Base Address bits 24-31 */
/* USB Debug and Idle Register */
#if defined(CHIP_PIC32MX5) || defined(CHIP_PIC32MX6) || defined(CHIP_PIC32MX7)
# define USB_CNFG1_UASUSPND (1 << 0) /* Bit 0: Automatic Suspend Enable */
#endif
#define USB_CNFG1_USBSIDL (1 << 4) /* Bit 4: Stop in Idle Mode */
#define USB_CNFG1_USBFRZ (1 << 5) /* Bit 5: Freeze in Debug Mode */
#define USB_CNFG1_UOEMON (1 << 6) /* Bit 6: USB OE Monitor Enable */
#define USB_CNFG1_UTEYE (1 << 7) /* Bit 7: USB Eye-Pattern Test Enable */
/* USB Endpoint Control Register */
#define USB_EP_EPHSHK (1 << 0) /* Bit 0: Endpoint Handshake Enable */
#define USB_EP_EPSTALL (1 << 1) /* Bit 1: Endpoint Stall Status */
#define USB_EP_EPTXEN (1 << 2) /* Bit 2: Endpoint Transmit Enable */
#define USB_EP_EPRXEN (1 << 3) /* Bit 3: Endpoint Receive Enable */
#define USB_EP_EPCONDIS (1 << 4) /* Bit 4: Bidirectional Endpoint Control */
#define USB_EP_RETRYDIS (1 << 6) /* Bit 6: Retry Disable (Host mode and U1EP0 only) */
#define USB_EP_LSPD (1 << 7) /* Bit 7: Low-Speed Direct Connection Enable */
/* Buffer Descriptor Table (BDT) ****************************************************/
/* Offset 0: On write (software->hardware) */
#define USB_BDT_BSTALL (1 << 2) /* Bit 2: Buffer Stall Enable bit */
#define USB_BDT_DTS (1 << 3) /* Bit 3: Data Toggle Synchronization Enable bit */
#define USB_BDT_NINC (1 << 4) /* Bit 4: DMA Address Increment Disable bit */
#define USB_BDT_KEEP (1 << 5) /* Bit 5: BD Keep Enable bit */
#define USB_BDT_DATA01 (1 << 6) /* Bit 6: Data Toggle Packet bit */
#define USB_BDT_UOWN (1 << 7) /* Bit 7: USB Own bit */
#define USB_BDT_BYTECOUNT_SHIFT (16) /* Bits 16-25: Byte Count bits */
#define USB_BDT_BYTECOUNT_MASK (0x3ff << USB_BDT_BYTECOUNT_SHIFT)
#define USB_BDT_DATA0 0 /* DATA0 packet expected next */
#define USB_BDT_DATA1 USB_BDT_DATA01 /* DATA1 packet expected next */
#define USB_BDT_COWN 0 /* CPU owns the descriptor */
/* Offset 0: On read (hardware->software) */
#define USB_BDT_PID_SHIFT (2) /* Bits 2-5: Packet Identifier bits */
#define USB_BDT_PID_MASK (15 << USB_BDT_BYTECOUNT_SHIFT)
/* Bit 7: USB Own bit (same) */
/* Bits 16-25: Byte Count bits (same) */
/* Offset 4: BUFFER_ADDRESS, 32-bit Buffer Address bits */
/************************************************************************************
* Public Types
************************************************************************************/
#ifndef __ASSEMBLY__
/* Buffer Descriptor Status Register layout. */
struct usbotg_bdtentry_s
{
uint32_t status; /* Status, byte count, and PID */
uint8_t *addr; /* Buffer address */
};
/************************************************************************************
* Inline Functions
************************************************************************************/
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#ifdef __cplusplus
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
#undef EXTERN
#ifdef __cplusplus
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_MIPS_SRC_PIC32MX_PIC32MX_USBOTG_H */

4
configs/sure-pic32mx/src/Makefile
View File

@ -48,6 +48,10 @@ ifeq ($(CONFIG_ARCH_BUTTONS),y)
CSRCS += up_buttons.c
endif
ifeq ($(CONFIG_PIC32MX_USBDEV),y)
CSRCS += up_usbdev.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif

16
configs/sure-pic32mx/src/sure-internal.h
View File

@ -2,7 +2,7 @@
* configs/sure-pic32mx/src/sure-internal.h
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -81,7 +81,7 @@ extern "C" {
* Name: pic32mx_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the PCB Logic board.
* Called to configure SPI chip select GPIO pins for the Sure PIC32MX Logic board.
*
************************************************************************************/
@ -89,6 +89,18 @@ extern "C" {
EXTERN void weak_function pic32mx_spiinitialize(void);
#endif
/************************************************************************************
* Name: pic32mx_usdbinitialize
*
* Description:
* Called to configure the mini-B PHY on the Sure PIC32MX board for the USB device
*
************************************************************************************/
#if defined(CONFIG_PIC32MX_USBDEV)
EXTERN void weak_function pic32mx_usdbinitialize(void);
#endif
/************************************************************************************
* Name: pic32mx_ledinit
*

9
configs/sure-pic32mx/src/up_boot.c
View File

@ -85,6 +85,15 @@ void pic32mx_boardinitialize(void)
}
#endif
/* Configure the mini-B PHY on the Sure PIC32MX board for the USB device */
#if defined(CONFIG_PIC32MX_USBDEV)
if (pic32mx_usbdevinitialize)
{
pic32mx_usbdevinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS

24
configs/sure-pic32mx/src/up_spi.c
View File

@ -1,9 +1,9 @@
/************************************************************************************
* configs/sure-pic32mx/src/up_ssp.c
* arch/arm/src/board/up_ssp.c
* configs/sure-pic32mx/src/up_spi.c
* arch/arm/src/board/up_spi.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -65,16 +65,16 @@
*/
#ifdef CONFIG_SPI_DEBUG
# define sspdbg lldbg
# define spidbg lldbg
# ifdef CONFIG_SPI_VERBOSE
# define sspvdbg lldbg
# define spivdbg lldbg
# else
# define sspvdbg(x...)
# define spivdbg(x...)
# endif
#else
# undef CONFIG_SPI_VERBOSE
# define sspdbg(x...)
# define sspvdbg(x...)
# define spidbg(x...)
# define spivdbg(x...)
#endif
/************************************************************************************
@ -86,14 +86,14 @@
************************************************************************************/
/************************************************************************************
* Name: pic32mx_sspinitialize
* Name: pic32mx_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Sure PIC32MX board.
*
************************************************************************************/
void weak_function pic32mx_sspinitialize(void)
void weak_function pic32mx_spiinitialize(void)
{
/* Configure the SPI2 chip select GPIOs */
@ -130,13 +130,13 @@ void weak_function pic32mx_sspinitialize(void)
#ifdef CONFIG_PIC32MX_SPI2
void pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
#warning "Missing logic"
}
uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
sspdbg("Returning nothing\n");
spidbg("Returning nothing\n");
#warning "Missing logic"
return 0;
}

6
tools/configure.sh
View File

@ -165,4 +165,10 @@ if [ ! -z "${appdir}" ]; then
echo "CONFIG_APPS_DIR=\"$appdir\"" >> "${TOPDIR}/.configX"
fi
fi
# install the final .configX only if it differs from the existing
# .config file.
install -C "${TOPDIR}/.configX" "${TOPDIR}/.config"
rm -f "${TOPDIR}/.configX"