Completes coding of basic interrupt handling logic

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@199 42af7a65-404d-4744-a932-0658087f49c3

arch/arm/include/lpc214x/irq.h

@@ -80,7 +80,9 @@
  * Public Types
  ************************************************************/
 
+#ifndef __ASSEMBLY__
 typedef void (*vic_vector_t)(uint32 *regs);
+#endif
 
 /************************************************************
  * Inline functions

arch/arm/src/lpc214x/chip.h

@@ -68,7 +68,7 @@
 #define LPC214X_PLL_BASE                0xe01fc080  /* Phase Locked Loop (PLL) Base Address */
 #define LPC214X_VPBDIV                  0xe01fc100  /* VPBDIV Address */
 #define LPC214X_EMC_BASE                0xffe00000  /* External Memory Controller (EMC) Base Address */
-#define LPC214X_VIC_BASE                0xffff0000  /* Vectored Interrupt Controller (VIC) Base */
+#define LPC214X_VIC_BASE                0xfffff000  /* Vectored Interrupt Controller (VIC) Base */
 
 /* UART0/1 Register Offsets */
 

arch/arm/src/lpc214x/lpc214x_decodeirq.c

@@ -65,6 +65,10 @@
  * Private Data
  ********************************************************************************/
 
+/* This type arry maps 4 bits into the bit number of the lowest bit that it set */
+
+static uint8 g_nibblemap[16] = { 0, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0 };
+
 /********************************************************************************
  * Private Functions
  ********************************************************************************/
@@ -108,19 +112,34 @@ static void lpc214x_decodeirq( uint32 *regs)
   PANIC(OSERR_ERREXCEPTION);
 #else
 
-  /* Decode the interrupt.  First, fetch the interrupt id register. */
+  /* Decode the interrupt. We have to do this by search for the lowest numbered
+   * non-zero bit in the interrupt status register.
+   */
 
-  int irq = 0;
-#warning "Need to decode the interrupt here"
+  uint32 pending = vic_getreg(LPC214X_VIC_IRQSTATUS_OFFSET) & 0x007fffff;
+  unsigned int nibble;
+  unsigned int irq_base;
+  unsigned int irq = NR_IRQS;
 
-  /* Verify that the resulting IRQ number is valie */
+  /* Search in groups of four bits.  For 22 sources, this is at most five
+   * times through the loop.
+   */
 
-  if ((unsigned)irq < NR_IRQS)
+  for (nibble = pending & 0xff, irq_base = 0;
+       pending && irq < NR_IRQS;
+       pending >>= 4, nibble = pending & 0xff, irq_base += 4)
     {
-      /* Mask and acknowledge the interrupt */
+      if (nibble)
+        {
+	  irq = irq_base + g_nibblemap[nibble];
+          break;
+	}
+    }
 
-      up_maskack_irq(irq);
+  /* Verify that the resulting IRQ number is valid */
 
+  if (irq < NR_IRQS)
+    {
       /* Current regs non-zero indicates that we are processing an interrupt;
        * current_regs is also used to manage interrupt level context switches.
        */
@@ -134,12 +153,6 @@ static void lpc214x_decodeirq( uint32 *regs)
       /* Indicate that we are no long in an interrupt handler */
 
       current_regs = NULL;
-
-      /* Unmask the last interrupt (global interrupts are still
-       * disabled.
-       */
-
-      up_enable_irq(irq);
     }
 #endif
 }

arch/arm/src/lpc214x/lpc214x_irq.c

@@ -76,12 +76,14 @@ void up_irqinitialize(void)
 {
   int reg;
 
-  /* Acknowledge and disable all interrupts */
+  /* Disable all interrupts.  We do this by writing zero to the IntEnable
+   * register.  This is equivalent to writing all ones to the IntClearEnable
+   * register.
+   */
 
-  vic_putreg(0, LPC214X_VIC_INTENCLEAR_OFFSET);
   vic_putreg(0, LPC214X_VIC_INTENABLE_OFFSET);
 
-  /* All IRQs, no FIQs */
+  /* Select all IRQs, no FIQs */
 
   vic_putreg(0, LPC214X_VIC_INTSELECT_OFFSET);
 
@@ -98,8 +100,6 @@ void up_irqinitialize(void)
       vic_putreg(0, reg);
     }
 
-#warning "Not implemented"
-
   /* currents_regs is non-NULL only while processing an interrupt */
 
   current_regs = NULL;
@@ -121,7 +121,16 @@ void up_irqinitialize(void)
 
 void up_disable_irq(int irq)
 {
-#warning "Not implemented"
+  /* Verify that the IRQ number is within range */
+
+  if (irq < NR_IRQS)
+    {
+      /* Disable the irq by setting the corresponding bit in the VIC
+       * Interrupt Enable Clear register.
+       */
+
+      vic_putreg((1 << irq), LPC214X_VIC_INTENCLEAR_OFFSET);
+    }
 }
 
 /****************************************************************************
@@ -134,34 +143,55 @@ void up_disable_irq(int irq)
 
 void up_enable_irq(int irq)
 {
-#warning "Not implemented"
-}
+  /* Verify that the IRQ number is within range */
 
-/****************************************************************************
- * Name: up_maskack_irq
- *
- * Description:
- *   Mask the IRQ and acknowledge it
- *
- ****************************************************************************/
+  if (irq < NR_IRQS)
+    {
+      /* Disable all interrupts */
 
-void up_maskack_irq(int irq)
-{
-#warning "Not implemented"
+      irqstate_t flags = irqsave();
+
+      /* Enable the irq by setting the corresponding bit in the VIC
+       * Interrupt Enable register.
+       */
+
+      uint32 val = vic_getreg(LPC214X_VIC_INTENABLE_OFFSET);
+      vic_putreg(val | (1 << irq), LPC214X_VIC_INTENCLEAR_OFFSET);
+      irqrestore(flags);
+    }
 }
 
 /****************************************************************************
  * Name: up_attach_vector
  *
  * Description:
- *   Assign
+ *   Attach a user-supplied handler to a vectored interrupt
  *
  ****************************************************************************/
 
 #ifndef CONFIG_VECTORED_INTERRUPTS
 void up_attach_vector(int irq, int vector, vic_vector_t handler)
 {
-#warning "Not implemented"
+  /* Verify that the IRQ number and vector number are within range */
+
+  if (irq < NR_IRQS && vector < 16 && handler)
+    {
+      int offset = vector << 2;
+
+      /* Disable all interrupts */
+
+      irqstate_t flags = irqsave();
+
+      /* Save the vector address */
+
+      vic_putreg((uint32)handler, LPC214X_VIC_VECTADDR0_OFFSET + offset);
+
+      /* Enable the vectored interrupt */
+
+      vic_putreg(((irq << LPC214X_VECTCNTL_IRQSHIFT) | LPC214X_VECTCNTL_ENABLE),
+		 LPC214X_VIC_VECTCNTL0_OFFSET + offset);
+      irqrestore(flags);
+    }
 }
 #endif
 
@@ -169,13 +199,21 @@ void up_attach_vector(int irq, int vector, vic_vector_t handler)
  * Name: up_detach_vector
  *
  * Description:
- *   Mask the IRQ and acknowledge it
+ *   Detach a user-supplied handler from a vectored interrupt
  *
  ****************************************************************************/
 
 #ifndef CONFIG_VECTORED_INTERRUPTS
 void up_detach_vector(int vector)
 {
-#warning "Not implemented"
+  /* Verify that the vector number is within range */
+
+  if (vector < 16)
+    {
+      /* Disable the vectored interrupt */
+
+      int offset = vector << 2;
+      vic_putreg(0, LPC214X_VIC_VECTCNTL0_OFFSET + offset);
+    }
 }
 #endif

arch/arm/src/lpc214x/lpc214x_vic.h

@@ -49,6 +49,12 @@
 #define vic_getreg(o)   getreg32(LPC214X_VIC_BASE+(o))
 #define vic_putreg(v,o) putreg32((v),LPC214X_VIC_BASE+(o))
 
+// Vector Control Register bit definitions
+
+#define LPC214X_VECTCNTL_IRQMASK  (0x0000001f)
+#define LPC214X_VECTCNTL_IRQSHIFT (0)
+#define LPC214X_VECTCNTL_ENABLE   (1 << 5)
+
 /************************************************************************************
  * Public Types
  ************************************************************************************/