boards: cxd56: spresense: move audio configuration
The audio configuration is board specific and shared by both audio drivers. Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit is contained in:
Alin Jerpelea
patacongo
parent
b432ae5598
commit
502d7bb501
@ -5,425 +5,7 @@
|
||||
|
||||
comment "Audio Options"
|
||||
|
||||
menuconfig CXD56_AUDIO
|
||||
bool "CXD56 Audio Driver"
|
||||
config CXD56_AUDIO
|
||||
bool "CXD56 SDK Audio Driver"
|
||||
default n
|
||||
|
||||
if CXD56_AUDIO
|
||||
|
||||
config CXD56_I2S0
|
||||
bool "I2S0"
|
||||
default y
|
||||
---help---
|
||||
Enable I2S channel 0
|
||||
|
||||
config CXD56_I2S1
|
||||
bool "I2S1"
|
||||
default n
|
||||
---help---
|
||||
Enable I2S channel 1
|
||||
|
||||
menu "Audio baseband config settings"
|
||||
|
||||
choice
|
||||
prompt "Audio analog block selection"
|
||||
default CXD56_AUDIO_ANALOG_CXD5247
|
||||
|
||||
config CXD56_AUDIO_ANALOG_CXD5247
|
||||
bool "CXD5247"
|
||||
|
||||
config CXD56_AUDIO_ANALOG_NONE
|
||||
bool "System does not use audio analog block"
|
||||
endchoice
|
||||
|
||||
if CXD56_AUDIO_ANALOG_CXD5247
|
||||
menu "CXD5247 settings"
|
||||
choice
|
||||
prompt "X'tal frequency of the CXD5247"
|
||||
default CXD56_AUDIO_XTAL_SEL_49_152MHZ
|
||||
|
||||
config CXD56_AUDIO_XTAL_SEL_24_576MHZ
|
||||
bool "24.576MHz"
|
||||
|
||||
config CXD56_AUDIO_XTAL_SEL_49_152MHZ
|
||||
bool "49.152MHz"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "MICBIAS voltage of the CXD5247"
|
||||
default CXD56_AUDIO_MICBIAS_20V
|
||||
|
||||
config CXD56_AUDIO_MICBIAS_20V
|
||||
bool "2.0V"
|
||||
|
||||
config CXD56_AUDIO_MICBIAS_28V
|
||||
bool "2.8V"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_MIC_CHANNEL_SEL
|
||||
hex "MIC channel select map"
|
||||
default 0xFFFF4321
|
||||
range 0 0xFFFFFFFF
|
||||
---help---
|
||||
This designates microphone input of the CXD5247 in matrix format.
|
||||
One microphone can be assigned to multiple channels (CHs.)
|
||||
(Example: When DMA transfer is performed in monaural mode,
|
||||
AMIC1 is assigned to CH1 and CH2 and the same audio data is
|
||||
transferred to the each channel)
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of MCLKOUT selection"
|
||||
default CXD56_AUDIO_MCLKOUT_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of CLKOUT_DMIC selection"
|
||||
default CXD56_AUDIO_CLKOUT_DMIC_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of DA_DATA selection"
|
||||
default CXD56_AUDIO_DA_DATA_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of GPO_A selection"
|
||||
default CXD56_AUDIO_GPO_A_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_GPO_A_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_GPO_A_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_GPO_A_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_GPO_A_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Input source of Cascaded Integrator-Comb filter selection"
|
||||
default CXD56_AUDIO_CIC_IN_SEL_CXD
|
||||
|
||||
config CXD56_AUDIO_CIC_IN_SEL_CXD
|
||||
bool "from CXD5247"
|
||||
|
||||
config CXD56_AUDIO_CIC_IN_SEL_DMIC
|
||||
bool "from DMIC"
|
||||
|
||||
config CXD56_AUDIO_CIC_IN_SEL_NONE
|
||||
bool "No Cascaded Integrator-Comb filter input"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Drive currents of PDM signals"
|
||||
default CXD56_AUDIO_PDM_LOWEMI_2MA
|
||||
|
||||
config CXD56_AUDIO_PDM_LOWEMI_2MA
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_PDM_LOWEMI_4MA
|
||||
bool "4mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "HPADC mic bias selection"
|
||||
default CXD56_AUDIO_HPADC_MIC_BIAS_OFF
|
||||
---help---
|
||||
This setting depends on a circuit board configuration.
|
||||
Set "Microphone bias is enabled" when a microphone connected to
|
||||
HPADC should be applied with voltage from the CXD5247.
|
||||
Otherwise, set "Microphone bias is disabled".
|
||||
|
||||
config CXD56_AUDIO_HPADC_MIC_BIAS_ON
|
||||
bool "Microphone bias is enabled"
|
||||
|
||||
config CXD56_AUDIO_HPADC_MIC_BIAS_OFF
|
||||
bool "Microphone bias is disabled"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Version of the CXD5247"
|
||||
default CXD56_CXD5247_VER_ES4
|
||||
|
||||
config CXD56_CXD5247_VER_ES2
|
||||
bool "ES Version 2.0"
|
||||
|
||||
config CXD56_CXD5247_VER_ES3
|
||||
bool "ES Version 3.0"
|
||||
|
||||
config CXD56_CXD5247_VER_ES4
|
||||
bool "ES Version 4.0"
|
||||
endchoice
|
||||
|
||||
if CXD56_CXD5247_VER_ES4
|
||||
choice
|
||||
prompt "Speaker time split on drive selection"
|
||||
default CXD56_AUDIO_SP_SPLIT_SHORTEST
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_SHORTEST
|
||||
bool "shortest"
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_SHORT
|
||||
bool "short"
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_LONG
|
||||
bool "long"
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_LONGEST
|
||||
bool "longest"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Speaker drive mode selection"
|
||||
default CXD56_AUDIO_SP_DRV_LINEOUT
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_4DRIVERT
|
||||
bool "4Driver(SPK)"
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_2DRIVERT
|
||||
bool "2Driver"
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_1DRIVERT
|
||||
bool "1Driver(HP)"
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_LINEOUT
|
||||
bool "Lineout"
|
||||
endchoice
|
||||
endif # CXD56_CXD5247_VER_ES4
|
||||
endmenu
|
||||
endif # CXD56_AUDIO_ANALOG_CXD5247
|
||||
|
||||
menu "I2S settings"
|
||||
|
||||
if CXD56_I2S0
|
||||
choice
|
||||
prompt "I2S0 device mode selection"
|
||||
default CXD56_AUDIO_I2S_DEVICE_1_SLAVE
|
||||
---help---
|
||||
This designates ports and clock modes that are connected
|
||||
as interfaces for PCM signal input and output.
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_1_SLAVE
|
||||
bool "I2S0 Slave mode"
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_1_MASTER
|
||||
bool "I2S0 Master mode"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S0 format type selection"
|
||||
default CXD56_AUDIO_I2S_FORMAT_1_I2S
|
||||
---help---
|
||||
This designates the format of PCM signals on I2S.
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_1_I2S
|
||||
bool "I2S format"
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_1_LEFT
|
||||
bool "Left Justified format"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S0 bypass mode selection"
|
||||
default CXD56_AUDIO_I2S_BYPASS_MODE_1_DISABLE
|
||||
---help---
|
||||
This designates the bypass mode of the sampling rate converter.
|
||||
To improve sound quality, set it to "Enable".
|
||||
The bypass mode can be enable when audio clk_mode is Hi-Res mode,
|
||||
and I2S device mode is master mode and rate is 192kHz(192000).
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_1_ENABLE
|
||||
bool "Enable bypass"
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_1_DISABLE
|
||||
bool "Disable bypass"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_I2S_RATE_1
|
||||
int "I2S0 data rate"
|
||||
default 48000
|
||||
range 48000 192000
|
||||
---help---
|
||||
This designates input and output data rate of I2S.
|
||||
The maximum rate is 192000.
|
||||
|
||||
endif # CXD56_I2S0
|
||||
|
||||
if CXD56_I2S1
|
||||
choice
|
||||
prompt "I2S1 device mode selection"
|
||||
default CXD56_AUDIO_I2S_DEVICE_2_SLAVE
|
||||
---help---
|
||||
This designates ports and clock modes that are connected
|
||||
as interfaces for PCM signal input and output.
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_2_SLAVE
|
||||
bool "I2S1 Slave mode"
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_2_MASTER
|
||||
bool "I2S1 Master mode"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S1 format type selection"
|
||||
default CXD56_AUDIO_I2S_FORMAT_2_I2S
|
||||
---help---
|
||||
This designates the format of PCM signals on I2S0.
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_2_I2S
|
||||
bool "I2S format"
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_2_LEFT
|
||||
bool "Left Justified format"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S1 bypass mode selection"
|
||||
default CXD56_AUDIO_I2S_BYPASS_MODE_2_DISABLE
|
||||
---help---
|
||||
This designates the bypass mode of the sampling rate converter.
|
||||
To improve sound quality, set it to "Enable".
|
||||
The bypass mode can be enable when audio clk_mode is Hi-Res mode,
|
||||
and I2S device mode is master mode and rate is 192kHz(192000).
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_2_ENABLE
|
||||
bool "Enable bypass"
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_2_DISABLE
|
||||
bool "Disable bypass"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_I2S_RATE_2
|
||||
int "I2S1 data rate"
|
||||
default 48000
|
||||
range 48000 192000
|
||||
---help---
|
||||
This designates input and output data rate of I2S1.
|
||||
The maximum rate is 192000.
|
||||
|
||||
endif # CXD56_I2S1
|
||||
|
||||
choice
|
||||
prompt "Drive currents of I2S signals"
|
||||
default CXD56_AUDIO_I2S_LOWEMI_2MA
|
||||
|
||||
config CXD56_AUDIO_I2S_LOWEMI_2MA
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_I2S_LOWEMI_4MA
|
||||
bool "4mA"
|
||||
endchoice
|
||||
endmenu
|
||||
|
||||
choice
|
||||
prompt "ON/OFF of Automatic Level Control/Sound Pressure Counter selection"
|
||||
default CXD56_AUDIO_ALC_SPC_SEL_OFF
|
||||
|
||||
config CXD56_AUDIO_ALC_SPC_SEL_OFF
|
||||
bool "All OFF"
|
||||
|
||||
config CXD56_AUDIO_ALC_SPC_SEL_ALC
|
||||
bool "Automatic Level Control ON"
|
||||
|
||||
config CXD56_AUDIO_ALC_SPC_SEL_SPC
|
||||
bool "Sound Pressure Counter ON"
|
||||
endchoice
|
||||
|
||||
if CXD56_AUDIO_ALC_SPC_SEL_ALC
|
||||
menu "Automatic Level Control setting"
|
||||
config CXD56_AUDIO_ALC_KNEE
|
||||
int "Knee levels of Automatic Level Control.[(1/10)dB]"
|
||||
default -40
|
||||
range -635 0
|
||||
---help---
|
||||
This command sets integer values 10 times larger than knee levels of
|
||||
Automatic Level Control. (step width: 0.5 dB) When a value within the
|
||||
range in the table below with a number other than 0 or 5 in one's
|
||||
place is designated, it will be regarded as a integer value round up
|
||||
to zero or five in the one's place. For example, when "-24" is
|
||||
designated, the value will be regarded as "-20".
|
||||
|
||||
config CXD56_AUDIO_ALC_TARGET
|
||||
int "Target level of Automatic Level Control.[dB]"
|
||||
default 0
|
||||
range -63 0
|
||||
endmenu
|
||||
endif # CXD56_AUDIO_ALC_SPC_SEL_ALC
|
||||
|
||||
if CXD56_AUDIO_ALC_SPC_SEL_SPC
|
||||
menu "Sound Pressure Conter setting"
|
||||
config CXD56_AUDIO_SPC_LIMIT
|
||||
int "Limit levels of Sound Pressure Counter.[(1/10)dB]"
|
||||
default 0
|
||||
range -250 0
|
||||
---help---
|
||||
This command sets integer values 10 times larger than limit levels of
|
||||
Sound Pressure Counter. (step width: 0.5 dB) When a value within the
|
||||
range in the table below with a number other than 0 or 5 in one's
|
||||
place is designated, it will be regarded as a integer value round up
|
||||
to zero or five in the one's place. For example, when "-24" is
|
||||
designated, the value will be regarded as "-20".
|
||||
endmenu
|
||||
endif # CXD56_AUDIO_ALC_SPC_SEL_SPC
|
||||
|
||||
choice
|
||||
prompt "LR data format during DMA transfer"
|
||||
default CXD56_AUDIO_DMA_DATA_FORMAT_RL
|
||||
---help---
|
||||
This sets the data arrangement of left channel and right channel in
|
||||
the data format for 16 bit DMA transfer.
|
||||
|
||||
config CXD56_AUDIO_DMA_DATA_FORMAT_LR
|
||||
bool "allocate left channel data in most significant bit"
|
||||
|
||||
config CXD56_AUDIO_DMA_DATA_FORMAT_RL
|
||||
bool "allocate right channel data in most significant bit"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_MIC_BOOT_WAIT
|
||||
int "Wait time for mic booting.[msec]"
|
||||
default 1100
|
||||
range 0 65535
|
||||
|
||||
endmenu
|
||||
|
||||
endif # CXD56_AUDIO
|
||||
|
||||
@ -13,6 +13,434 @@ config CXD56_SPIFLASHSIZE
|
||||
Specify the SPI flash total available size for the application.
|
||||
This value is generally set half of SPI flash device capacity.
|
||||
|
||||
comment "Audio Options"
|
||||
|
||||
if AUDIO_CXD56 || CXD56_AUDIO
|
||||
|
||||
choice
|
||||
prompt "Audio I2S settings"
|
||||
default CXD56_I2S0
|
||||
|
||||
config CXD56_I2S0
|
||||
bool "I2S0"
|
||||
|
||||
config CXD56_I2S1
|
||||
bool "I2S1"
|
||||
endchoice
|
||||
|
||||
menu "Audio baseband config settings"
|
||||
|
||||
choice
|
||||
prompt "Audio analog block selection"
|
||||
default CXD56_AUDIO_ANALOG_CXD5247
|
||||
|
||||
config CXD56_AUDIO_ANALOG_CXD5247
|
||||
bool "CXD5247"
|
||||
|
||||
config CXD56_AUDIO_ANALOG_NONE
|
||||
bool "System does not use audio analog block"
|
||||
endchoice
|
||||
|
||||
if CXD56_AUDIO_ANALOG_CXD5247
|
||||
|
||||
menu "CXD5247 settings"
|
||||
choice
|
||||
prompt "X'tal frequency of the CXD5247"
|
||||
default CXD56_AUDIO_XTAL_SEL_49_152MHZ
|
||||
|
||||
config CXD56_AUDIO_XTAL_SEL_24_576MHZ
|
||||
bool "24.576MHz"
|
||||
|
||||
config CXD56_AUDIO_XTAL_SEL_49_152MHZ
|
||||
bool "49.152MHz"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "MICBIAS voltage of the CXD5247"
|
||||
default CXD56_AUDIO_MICBIAS_20V
|
||||
|
||||
config CXD56_AUDIO_MICBIAS_20V
|
||||
bool "2.0V"
|
||||
|
||||
config CXD56_AUDIO_MICBIAS_28V
|
||||
bool "2.8V"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_MIC_CHANNEL_SEL
|
||||
hex "MIC channel select map"
|
||||
default 0xFFFF4321
|
||||
range 0 0xFFFFFFFF
|
||||
---help---
|
||||
This designates microphone input of the CXD5247 in matrix format.
|
||||
One microphone can be assigned to multiple channels (CHs.)
|
||||
(Example: When DMA transfer is performed in monaural mode,
|
||||
AMIC1 is assigned to CH1 and CH2 and the same audio data is
|
||||
transferred to the each channel)
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of MCLKOUT selection"
|
||||
default CXD56_AUDIO_MCLKOUT_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_MCLKOUT_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of CLKOUT_DMIC selection"
|
||||
default CXD56_AUDIO_CLKOUT_DMIC_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_CLKOUT_DMIC_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of DA_DATA selection"
|
||||
default CXD56_AUDIO_DA_DATA_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_DA_DATA_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Output drive strength of GPO_A selection"
|
||||
default CXD56_AUDIO_GPO_A_WEAKEST
|
||||
|
||||
config CXD56_AUDIO_GPO_A_WEAKEST
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_GPO_A_WEAKER
|
||||
bool "4mA"
|
||||
|
||||
config CXD56_AUDIO_GPO_A_STRONGER
|
||||
bool "6mA"
|
||||
|
||||
config CXD56_AUDIO_GPO_A_STRONGEST
|
||||
bool "8mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Input source of Cascaded Integrator-Comb filter selection"
|
||||
default CXD56_AUDIO_CIC_IN_SEL_CXD
|
||||
|
||||
config CXD56_AUDIO_CIC_IN_SEL_CXD
|
||||
bool "from CXD5247"
|
||||
|
||||
config CXD56_AUDIO_CIC_IN_SEL_DMIC
|
||||
bool "from DMIC"
|
||||
|
||||
config CXD56_AUDIO_CIC_IN_SEL_NONE
|
||||
bool "No Cascaded Integrator-Comb filter input"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Drive currents of PDM signals"
|
||||
default CXD56_AUDIO_PDM_LOWEMI_2MA
|
||||
|
||||
config CXD56_AUDIO_PDM_LOWEMI_2MA
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_PDM_LOWEMI_4MA
|
||||
bool "4mA"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "HPADC mic bias selection"
|
||||
default CXD56_AUDIO_HPADC_MIC_BIAS_OFF
|
||||
---help---
|
||||
This setting depends on a circuit board configuration.
|
||||
Set "Microphone bias is enabled" when a microphone connected to
|
||||
HPADC should be applied with voltage from the CXD5247.
|
||||
Otherwise, set "Microphone bias is disabled".
|
||||
|
||||
config CXD56_AUDIO_HPADC_MIC_BIAS_ON
|
||||
bool "Microphone bias is enabled"
|
||||
|
||||
config CXD56_AUDIO_HPADC_MIC_BIAS_OFF
|
||||
bool "Microphone bias is disabled"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Version of the CXD5247"
|
||||
default CXD56_CXD5247_VER_ES4
|
||||
|
||||
config CXD56_CXD5247_VER_ES2
|
||||
bool "ES Version 2.0"
|
||||
|
||||
config CXD56_CXD5247_VER_ES3
|
||||
bool "ES Version 3.0"
|
||||
|
||||
config CXD56_CXD5247_VER_ES4
|
||||
bool "ES Version 4.0"
|
||||
endchoice
|
||||
|
||||
if CXD56_CXD5247_VER_ES4
|
||||
choice
|
||||
prompt "Speaker time split on drive selection"
|
||||
default CXD56_AUDIO_SP_SPLIT_SHORTEST
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_SHORTEST
|
||||
bool "shortest"
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_SHORT
|
||||
bool "short"
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_LONG
|
||||
bool "long"
|
||||
|
||||
config CXD56_AUDIO_SP_SPLIT_LONGEST
|
||||
bool "longest"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "Speaker drive mode selection"
|
||||
default CXD56_AUDIO_SP_DRV_LINEOUT
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_4DRIVERT
|
||||
bool "4Driver(SPK)"
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_2DRIVERT
|
||||
bool "2Driver"
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_1DRIVERT
|
||||
bool "1Driver(HP)"
|
||||
|
||||
config CXD56_AUDIO_SP_DRV_LINEOUT
|
||||
bool "Lineout"
|
||||
endchoice
|
||||
endif # CXD56_CXD5247_VER_ES4
|
||||
endmenu
|
||||
endif # CXD56_AUDIO_ANALOG_CXD5247
|
||||
|
||||
menu "I2S settings"
|
||||
|
||||
if CXD56_I2S0
|
||||
choice
|
||||
prompt "I2S0 device mode selection"
|
||||
default CXD56_AUDIO_I2S_DEVICE_1_SLAVE
|
||||
---help---
|
||||
This designates ports and clock modes that are connected
|
||||
as interfaces for PCM signal input and output.
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_1_SLAVE
|
||||
bool "I2S0 Slave mode"
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_1_MASTER
|
||||
bool "I2S0 Master mode"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S0 format type selection"
|
||||
default CXD56_AUDIO_I2S_FORMAT_1_I2S
|
||||
---help---
|
||||
This designates the format of PCM signals on I2S.
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_1_I2S
|
||||
bool "I2S format"
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_1_LEFT
|
||||
bool "Left Justified format"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S0 bypass mode selection"
|
||||
default CXD56_AUDIO_I2S_BYPASS_MODE_1_DISABLE
|
||||
---help---
|
||||
This designates the bypass mode of the sampling rate converter.
|
||||
To improve sound quality, set it to "Enable".
|
||||
The bypass mode can be enable when audio clk_mode is Hi-Res mode,
|
||||
and I2S device mode is master mode and rate is 192kHz(192000).
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_1_ENABLE
|
||||
bool "Enable bypass"
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_1_DISABLE
|
||||
bool "Disable bypass"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_I2S_RATE_1
|
||||
int "I2S0 data rate"
|
||||
default 48000
|
||||
range 48000 192000
|
||||
---help---
|
||||
This designates input and output data rate of I2S.
|
||||
The maximum rate is 192000.
|
||||
|
||||
endif # CXD56_I2S0
|
||||
|
||||
if CXD56_I2S1
|
||||
choice
|
||||
prompt "I2S1 device mode selection"
|
||||
default CXD56_AUDIO_I2S_DEVICE_2_SLAVE
|
||||
---help---
|
||||
This designates ports and clock modes that are connected
|
||||
as interfaces for PCM signal input and output.
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_2_SLAVE
|
||||
bool "I2S1 Slave mode"
|
||||
|
||||
config CXD56_AUDIO_I2S_DEVICE_2_MASTER
|
||||
bool "I2S1 Master mode"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S1 format type selection"
|
||||
default CXD56_AUDIO_I2S_FORMAT_2_I2S
|
||||
---help---
|
||||
This designates the format of PCM signals on I2S0.
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_2_I2S
|
||||
bool "I2S format"
|
||||
|
||||
config CXD56_AUDIO_I2S_FORMAT_2_LEFT
|
||||
bool "Left Justified format"
|
||||
endchoice
|
||||
|
||||
choice
|
||||
prompt "I2S1 bypass mode selection"
|
||||
default CXD56_AUDIO_I2S_BYPASS_MODE_2_DISABLE
|
||||
---help---
|
||||
This designates the bypass mode of the sampling rate converter.
|
||||
To improve sound quality, set it to "Enable".
|
||||
The bypass mode can be enable when audio clk_mode is Hi-Res mode,
|
||||
and I2S device mode is master mode and rate is 192kHz(192000).
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_2_ENABLE
|
||||
bool "Enable bypass"
|
||||
|
||||
config CXD56_AUDIO_I2S_BYPASS_MODE_2_DISABLE
|
||||
bool "Disable bypass"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_I2S_RATE_2
|
||||
int "I2S1 data rate"
|
||||
default 48000
|
||||
range 48000 192000
|
||||
---help---
|
||||
This designates input and output data rate of I2S1.
|
||||
The maximum rate is 192000.
|
||||
|
||||
endif # CXD56_I2S1
|
||||
|
||||
choice
|
||||
prompt "Drive currents of I2S signals"
|
||||
default CXD56_AUDIO_I2S_LOWEMI_2MA
|
||||
|
||||
config CXD56_AUDIO_I2S_LOWEMI_2MA
|
||||
bool "2mA"
|
||||
|
||||
config CXD56_AUDIO_I2S_LOWEMI_4MA
|
||||
bool "4mA"
|
||||
endchoice
|
||||
endmenu
|
||||
|
||||
choice
|
||||
prompt "ON/OFF of Automatic Level Control/Sound Pressure Counter selection"
|
||||
default CXD56_AUDIO_ALC_SPC_SEL_OFF
|
||||
|
||||
config CXD56_AUDIO_ALC_SPC_SEL_OFF
|
||||
bool "All OFF"
|
||||
|
||||
config CXD56_AUDIO_ALC_SPC_SEL_ALC
|
||||
bool "Automatic Level Control ON"
|
||||
|
||||
config CXD56_AUDIO_ALC_SPC_SEL_SPC
|
||||
bool "Sound Pressure Counter ON"
|
||||
endchoice
|
||||
|
||||
if CXD56_AUDIO_ALC_SPC_SEL_ALC
|
||||
menu "Automatic Level Control setting"
|
||||
config CXD56_AUDIO_ALC_KNEE
|
||||
int "Knee levels of Automatic Level Control.[(1/10)dB]"
|
||||
default -40
|
||||
range -635 0
|
||||
---help---
|
||||
This command sets integer values 10 times larger than knee levels of
|
||||
Automatic Level Control. (step width: 0.5 dB) When a value within the
|
||||
range in the table below with a number other than 0 or 5 in one's
|
||||
place is designated, it will be regarded as a integer value round up
|
||||
to zero or five in the one's place. For example, when "-24" is
|
||||
designated, the value will be regarded as "-20".
|
||||
|
||||
config CXD56_AUDIO_ALC_TARGET
|
||||
int "Target level of Automatic Level Control.[dB]"
|
||||
default 0
|
||||
range -63 0
|
||||
endmenu
|
||||
endif # CXD56_AUDIO_ALC_SPC_SEL_ALC
|
||||
|
||||
if CXD56_AUDIO_ALC_SPC_SEL_SPC
|
||||
menu "Sound Pressure Conter setting"
|
||||
config CXD56_AUDIO_SPC_LIMIT
|
||||
int "Limit levels of Sound Pressure Counter.[(1/10)dB]"
|
||||
default 0
|
||||
range -250 0
|
||||
---help---
|
||||
This command sets integer values 10 times larger than limit levels of
|
||||
Sound Pressure Counter. (step width: 0.5 dB) When a value within the
|
||||
range in the table below with a number other than 0 or 5 in one's
|
||||
place is designated, it will be regarded as a integer value round up
|
||||
to zero or five in the one's place. For example, when "-24" is
|
||||
designated, the value will be regarded as "-20".
|
||||
endmenu
|
||||
endif # CXD56_AUDIO_ALC_SPC_SEL_SPC
|
||||
|
||||
choice
|
||||
prompt "LR data format during DMA transfer"
|
||||
default CXD56_AUDIO_DMA_DATA_FORMAT_RL
|
||||
---help---
|
||||
This sets the data arrangement of left channel and right channel in
|
||||
the data format for 16 bit DMA transfer.
|
||||
|
||||
config CXD56_AUDIO_DMA_DATA_FORMAT_LR
|
||||
bool "allocate left channel data in most significant bit"
|
||||
|
||||
config CXD56_AUDIO_DMA_DATA_FORMAT_RL
|
||||
bool "allocate right channel data in most significant bit"
|
||||
endchoice
|
||||
|
||||
config CXD56_AUDIO_MIC_BOOT_WAIT
|
||||
int "Wait time for mic booting.[msec]"
|
||||
default 1100
|
||||
range 0 65535
|
||||
|
||||
endmenu
|
||||
endif # Spresense Audio
|
||||
|
||||
config CXD56_IMAGEPROC
|
||||
bool "Spresense Image Processor"
|
||||
default n
|
||||
select CXD56_GE2D
|
||||
---help---
|
||||
Enable support for accelerated format converter, rotation and so on.
|
||||
using the CXD5602 image processing accelerator.
|
||||
|
||||
config SPRESENSE_EXTENSION
|
||||
bool "Extension board"
|
||||
default n
|
||||
@ -74,14 +502,6 @@ config LCD_ON_MAIN_BOARD
|
||||
|
||||
endchoice
|
||||
endif
|
||||
config CXD56_IMAGEPROC
|
||||
bool "Spresense Image Processor"
|
||||
default n
|
||||
select CXD56_GE2D
|
||||
---help---
|
||||
Enable support for accelerated format converter, rotation and so on.
|
||||
using the CXD5602 image processing accelerator.
|
||||
|
||||
comment "LTE Options"
|
||||
|
||||
menuconfig CXD56_LTE
|
||||
|
||||
Loading…
Reference in New Issue
Block a user