sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAMA5: Cosmetic clean-up of README files

Browse Source
This commit is contained in:
Gregory Nutt 2014-06-04 17:02:30 -06:00
parent 3960271d06
commit 50893fd36c
2 changed files with 69 additions and 69 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

64
configs/sama5d3-xplained/README.txt
View File

@ -748,7 +748,7 @@ Networking
peripherals: (1) The 10/100Base-T EMAC peripheral and (2) the
10/100/1000Base-T GMAC peripheral.
Selecting the EMAC peripheral
Selecting the EMAC0 peripheral
-----------------------------
System Type -> SAMA5 Peripheral Support
@ -775,17 +775,17 @@ Networking
-----------------------------
System Type -> SAMA5 Peripheral Support
CONFIG_SAMA5_GMAC=y : Enable the GMAC peripheral
CONFIG_SAMA5_GMAC=y : Enable the GMAC peripheral
System Type -> GMAC device driver options
CONFIG_SAMA5_GMAC_NRXBUFFERS=16 : Set aside some RS and TX buffers
CONFIG_SAMA5_GMAC_NRXBUFFERS=16 : Set aside some RS and TX buffers
CONFIG_SAMA5_GMAC_NTXBUFFERS=4
CONFIG_SAMA5_GMAC_PHYADDR=1 : KSZ8081 PHY is at address 1
CONFIG_SAMA5_GMAC_AUTONEG=y : Use autonegotiation
CONFIG_SAMA5_GMAC_PHYADDR=1 : KSZ8081 PHY is at address 1
CONFIG_SAMA5_GMAC_AUTONEG=y : Use autonegotiation
If both EMAC and GMAC are selected, you will also need:
CONFIG_SAMA5_GMAC_ISETH0=y : GMAC is "eth0"; EMAC is "eth1"
CONFIG_SAMA5_GMAC_ISETH0=y : GMAC is "eth0"; EMAC is "eth1"
PHY selection. Later in the configuration steps, you will need to select
the KSZ9081 PHY for GMAC (See below)
@ -794,36 +794,36 @@ Networking
-----------------------------
Networking Support
CONFIG_NET=y : Enable Neworking
CONFIG_NET_SOCKOPTS=y : Enable socket operations
CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard
CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_BUFSIZE
CONFIG_NET_TCP=y : Enable TCP/IP networking
CONFIG_NET_TCPBACKLOG=y : Support TCP/IP backlog
CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 Read-ahead buffer size
CONFIG_NET_UDP=y : Enable UDP networking
CONFIG_NET_ICMP=y : Enable ICMP networking
CONFIG_NET_ICMP_PING=y : Needed for NSH ping command
: Defaults should be okay for other options
CONFIG_NET=y : Enable Neworking
CONFIG_NET_SOCKOPTS=y : Enable socket operations
CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard
CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_BUFSIZE
CONFIG_NET_TCP=y : Enable TCP/IP networking
CONFIG_NET_TCPBACKLOG=y : Support TCP/IP backlog
CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 : Read-ahead buffer size
CONFIG_NET_UDP=y : Enable UDP networking
CONFIG_NET_ICMP=y : Enable ICMP networking
CONFIG_NET_ICMP_PING=y : Needed for NSH ping command
: Defaults should be okay for other options
Device drivers -> Network Device/PHY Support
CONFIG_NETDEVICES=y : Enabled PHY selection
CONFIG_ETH0_PHY_KSZ8081=y : Select the KSZ8081 PHY (for EMAC), OR
CONFIG_ETH0_PHY_KSZ90x1=y : Select the KSZ9031 PHY (for GMAC)
CONFIG_NETDEVICES=y : Enabled PHY selection
CONFIG_ETH0_PHY_KSZ8081=y : Select the KSZ8081 PHY (for EMAC), OR
CONFIG_ETH0_PHY_KSZ90x1=y : Select the KSZ9031 PHY (for GMAC)
Application Configuration -> Network Utilities
CONFIG_NETUTILS_DNSCLIENT=y : Enable host address resolution
CONFIG_NETUTILS_TELNETD=y : Enable the Telnet daemon
CONFIG_NETUTILS_TFTPC=y : Enable TFTP data file transfers for get and put commands
CONFIG_NETUTILS_UIPLIB=y : Network library support is needed
CONFIG_NETUTILS_WEBCLIENT=y : Needed for wget support
: Defaults should be okay for other options
CONFIG_NETUTILS_DNSCLIENT=y : Enable host address resolution
CONFIG_NETUTILS_TELNETD=y : Enable the Telnet daemon
CONFIG_NETUTILS_TFTPC=y : Enable TFTP data file transfers for get and put commands
CONFIG_NETUTILS_UIPLIB=y : Network library support is needed
CONFIG_NETUTILS_WEBCLIENT=y : Needed for wget support
: Defaults should be okay for other options
Application Configuration -> NSH Library
CONFIG_NSH_TELNET=y : Enable NSH session via Telnet
CONFIG_NSH_IPADDR=0x0a000002 : Select an IP address
CONFIG_NSH_DRIPADDR=0x0a000001 : IP address of gateway/host PC
CONFIG_NSH_NETMASK=0xffffff00 : Netmask
CONFIG_NSH_NOMAC=y : Need to make up a bogus MAC address
: Defaults should be okay for other options
CONFIG_NSH_TELNET=y : Enable NSH session via Telnet
CONFIG_NSH_IPADDR=0x0a000002 : Select an IP address
CONFIG_NSH_DRIPADDR=0x0a000001 : IP address of gateway/host PC
CONFIG_NSH_NETMASK=0xffffff00 : Netmask
CONFIG_NSH_NOMAC=y : Need to make up a bogus MAC address
: Defaults should be okay for other options
Using the network with NSH
--------------------------

74
configs/sama5d3x-ek/README.txt
View File

@ -891,8 +891,8 @@ Networking
the EMAC peripheral; Only the SAMA5D33, SAMA5D34, and SAMA5D35 support
the GMAC perpheral! NOTE that the SAMA5D35 supports both!
Selecting the EMAC peripheral
-----------------------------
Selecting the EMAC0 peripheral
------------------------------
System Type
CONFIG_ARCH_CHIP_ATSAMA5D31=y : SAMA5D31 or SAMAD35 support EMAC
@ -901,7 +901,7 @@ Networking
System Type -> SAMA5 Peripheral Support
CONFIG_SAMA5_EMAC0=y : Enable the EMAC peripheral
System Type -> EMAC device driver options
System Type -> EMAC0 device driver options
CONFIG_SAMA5_EMAC0_NRXBUFFERS=16 : Set aside some RS and TX buffers
CONFIG_SAMA5_EMAC0_NTXBUFFERS=4
CONFIG_SAMA5_EMAC0_PHYADDR=1 : KSZ8021/31 PHY is at address 1
@ -922,22 +922,22 @@ Networking
-----------------------------
System Type
CONFIG_ARCH_CHIP_ATSAMA5D33=y : SAMA5D31, SAMA5D33 and SAMAD35
CONFIG_ARCH_CHIP_ATSAMA5D34=y : support GMAC (others do not)
CONFIG_ARCH_CHIP_ATSAMA5D35=y :
CONFIG_ARCH_CHIP_ATSAMA5D33=y : SAMA5D31, SAMA5D33 and SAMAD35
CONFIG_ARCH_CHIP_ATSAMA5D34=y : support GMAC (others do not)
CONFIG_ARCH_CHIP_ATSAMA5D35=y :
System Type -> SAMA5 Peripheral Support
CONFIG_SAMA5_GMAC=y : Enable the GMAC peripheral
CONFIG_SAMA5_GMAC=y : Enable the GMAC peripheral
System Type -> GMAC device driver options
CONFIG_SAMA5_GMAC_NRXBUFFERS=16 : Set aside some RS and TX buffers
CONFIG_SAMA5_GMAC_NRXBUFFERS=16 : Set aside some RS and TX buffers
CONFIG_SAMA5_GMAC_NTXBUFFERS=4
CONFIG_SAMA5_GMAC_PHYADDR=1 : KSZ8051 PHY is at address 1
CONFIG_SAMA5_GMAC_AUTONEG=y : Use autonegotiation
CONFIG_SAMA5_GMAC_PHYADDR=1 : KSZ8051 PHY is at address 1
CONFIG_SAMA5_GMAC_AUTONEG=y : Use autonegotiation
If both EMAC and GMAC are selected, you will also need:
CONFIG_SAMA5_GMAC_ISETH0=y : GMAC is "eth0"; EMAC is "eth1"
CONFIG_SAMA5_GMAC_ISETH0=y : GMAC is "eth0"; EMAC is "eth1"
PHY selection. Later in the configuration steps, you will need to select
the KSZ9021/31 PHY for GMAC (See below)
@ -946,36 +946,36 @@ Networking
-----------------------------
Networking Support
CONFIG_NET=y : Enable Neworking
CONFIG_NET_SOCKOPTS=y : Enable socket operations
CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard
CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_BUFSIZE
CONFIG_NET_TCP=y : Enable TCP/IP networking
CONFIG_NET_TCPBACKLOG=y : Support TCP/IP backlog
CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 Read-ahead buffer size
CONFIG_NET_UDP=y : Enable UDP networking
CONFIG_NET_ICMP=y : Enable ICMP networking
CONFIG_NET_ICMP_PING=y : Needed for NSH ping command
: Defaults should be okay for other options
CONFIG_NET=y : Enable Neworking
CONFIG_NET_SOCKOPTS=y : Enable socket operations
CONFIG_NET_BUFSIZE=562 : Maximum packet size (MTD) 1518 is more standard
CONFIG_NET_RECEIVE_WINDOW=562 : Should be the same as CONFIG_NET_BUFSIZE
CONFIG_NET_TCP=y : Enable TCP/IP networking
CONFIG_NET_TCPBACKLOG=y : Support TCP/IP backlog
CONFIG_NET_TCP_READAHEAD_BUFSIZE=562 : Read-ahead buffer size
CONFIG_NET_UDP=y : Enable UDP networking
CONFIG_NET_ICMP=y : Enable ICMP networking
CONFIG_NET_ICMP_PING=y : Needed for NSH ping command
: Defaults should be okay for other options
Device drivers -> Network Device/PHY Support
CONFIG_NETDEVICES=y : Enabled PHY selection
CONFIG_ETH0_PHY_KSZ8051=y : Select the KSZ8051 PHY (for EMAC), OR
CONFIG_ETH0_PHY_KSZ90x1=y : Select the KSZ9021/31 PHY (for GMAC)
CONFIG_NETDEVICES=y : Enabled PHY selection
CONFIG_ETH0_PHY_KSZ8051=y : Select the KSZ8051 PHY (for EMAC), OR
CONFIG_ETH0_PHY_KSZ90x1=y : Select the KSZ9021/31 PHY (for GMAC)
Application Configuration -> Network Utilities
CONFIG_NETUTILS_DNSCLIENT=y : Enable host address resolution
CONFIG_NETUTILS_TELNETD=y : Enable the Telnet daemon
CONFIG_NETUTILS_TFTPC=y : Enable TFTP data file transfers for get and put commands
CONFIG_NETUTILS_UIPLIB=y : Network library support is needed
CONFIG_NETUTILS_WEBCLIENT=y : Needed for wget support
: Defaults should be okay for other options
CONFIG_NETUTILS_DNSCLIENT=y : Enable host address resolution
CONFIG_NETUTILS_TELNETD=y : Enable the Telnet daemon
CONFIG_NETUTILS_TFTPC=y : Enable TFTP data file transfers for get and put commands
CONFIG_NETUTILS_UIPLIB=y : Network library support is needed
CONFIG_NETUTILS_WEBCLIENT=y : Needed for wget support
: Defaults should be okay for other options
Application Configuration -> NSH Library
CONFIG_NSH_TELNET=y : Enable NSH session via Telnet
CONFIG_NSH_IPADDR=0x0a000002 : Select an IP address
CONFIG_NSH_DRIPADDR=0x0a000001 : IP address of gateway/host PC
CONFIG_NSH_NETMASK=0xffffff00 : Netmask
CONFIG_NSH_NOMAC=y : Need to make up a bogus MAC address
: Defaults should be okay for other options
CONFIG_NSH_TELNET=y : Enable NSH session via Telnet
CONFIG_NSH_IPADDR=0x0a000002 : Select an IP address
CONFIG_NSH_DRIPADDR=0x0a000001 : IP address of gateway/host PC
CONFIG_NSH_NETMASK=0xffffff00 : Netmask
CONFIG_NSH_NOMAC=y : Need to make up a bogus MAC address
: Defaults should be okay for other options
Using the network with NSH
--------------------------