sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix badly applied patch to ENCX24J600

Browse Source
This commit is contained in:
Gregory Nutt 2013-09-25 08:26:56 -06:00
parent 71fa99d69f
commit 517887f445
1 changed files with 14 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
configs/sama5d3x-ek/README.txt
View File

@ -1937,10 +1937,6 @@ Configurations
CONFIG_SAMA5_EMAC_PHYSR_10FD=0x5 : " " " " " "
CONFIG_SAMA5_EMAC_PHYSR_100FD=0x6 : " " " " " "
Device drivers -> Network Device/PHY Support
CONFIG_NETDEVICES=y : Enabled PHY selection
CONFIG_ETH0_PHY_KSZ8051=y : Select the KSZ8051 PHY
Networking Support
CONFIG_NET=y : Enable Neworking
CONFIG_NET_SOCKOPTS=y : Enable socket operations
@ -1951,10 +1947,14 @@ Configurations
CONFIG_NET_ICMP=y : Enable ICMP networking
CONFIG_NET_ICMP_PING=y : Needed for NSH ping command
: Defaults should be okay for other options
Device drivers -> Network Device/PHY Support
CONFIG_NETDEVICES=y : Enabled PHY selection
CONFIG_ETH0_PHY_KSZ8051=y : Select the KSZ8051 PHY
Application Configuration -> Network Utilities
CONFIG_NETUTILS_RESOLV=y : Enable host address resolution
CONFIG_NETUTILS_TFTPC=y : Enable TFTP data file transfers for get and put commands
CONFIG_NETUTILS_TELNETD=y : Enable the Telnet daemon
CONFIG_NETUTILS_TFTPC=y : Enable TFTP data file transfers for get and put commands
CONFIG_NETUTILS_UIPLIB=y : Network library support is needed
CONFIG_NETUTILS_WEBCLIENT=y : Needed for wget support
: Defaults should be okay for other options
@ -1965,6 +1965,15 @@ Configurations
CONFIG_NSH_NETMASK=0xffffff00 : Netmask
CONFIG_NSH_NOMAC=y : Need to make up a bogus MAC address
NOTE: If you enable this feature, you experience a delay on booting.
That is because the start-up logic waits for the network connection
to be established before starting NuttX. In a real application, you
would probably want to do the network bringup on a separate thread
so that access to the NSH prompt is not delayed.
This delay will be especially long if the board is not connected to
a network.
STATUS:
PCK FREQUENCY
2013-7-19: This configuration (as do the others) run at 396MHz.