sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add LM3S6965 configuration

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2655 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-05-07 04:20:12 +00:00
parent dabd38db68
commit 529b0ba053
31 changed files with 2502 additions and 69 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
ChangeLog
View File

@ -1110,4 +1110,8 @@
for ENC28J60.
* arch/arm/src/str7x/str7x_xti.c - Add basic XTI support (external
interrupts).
* arch/arm/src/lm3s and arch/arm/include/lm3s - Add definitions for
LM3S6965
* configs/lm3s6965-ek - Add configuration for Stellaris LM3S6965
Evaluation Kit.

31
Documentation/NuttX.html
View File

@ -8,7 +8,7 @@
<tr align="center" bgcolor="#e4e4e4">
<td>
<h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
<p>Last Updated: May 4, 2010</p>
<p>Last Updated: May 6, 2010</p>
</td>
</tr>
</table>
@ -998,7 +998,7 @@
<td><br></td>
<td>
<p>
<b>Luminary LM3S6918</b>.
<b>Luminary/TI LM3S6918</b>.
This port uses the <a href=" http://www.micromint.com/">Micromint</a> Eagle-100 development
board with a GNU arm-elf toolchain* under either Linux or Cygwin.
</p>
@ -1025,6 +1025,29 @@
<td><br></td>
<td><hr></td>
</tr>
<tr>
<td><br></td>
<td>
<p>
<b>Luminary/TI LM3S6965</b>.
This port uses the Stellaris LM3S6965 Evalution Kit with a GNU arm-elf toolchain*
under either Linux or Cygwin.
</p>
<ul>
<p>
<b>STATUS:</b>
This port is available in the source tree, but is still under development.
</p>
<p>
<b>Development Environments:</b> See the Eagle-100 above.
</p>
</ul>
</td>
</tr>
<tr>
<td><br></td>
<td><hr></td>
</tr>
<tr>
<td><br></td>
<td>
@ -1695,6 +1718,10 @@ nuttx-5.5 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;
for ENC28J60.
* arch/arm/src/str7x/str7x_xti.c - Add basic XTI support (external
interrupts).
* arch/arm/src/lm3s and arch/arm/include/lm3s - Add definitions for
LM3S6965
* configs/lm3s6965-ek - Add configuration for Stellaris LM3S6965
Evaluation Kit.
pascal-2.1 2010-xx-xx Gregory Nutt &lt;spudmonkey@racsa.co.cr&gt;

2
arch/arm/src/lm3s/chip.h
View File

@ -46,7 +46,7 @@
* Pre-processor Definitions
************************************************************************************/
/* Get customizations for each supported chip (only the LM3S6918 right now) */
/* Get customizations for each supported chip (only the LM3S6918 and 65 right now) */
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
# define LM3S_NTIMERS 4 /* Four general purpose timers */

13
arch/arm/src/lm3s/lm3s_dumpgpio.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/arm/src/lm3s/lm3s_dumpgpio.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -60,6 +60,7 @@
/* NOTE: this is duplicated in lm3s_gpio.c */
#ifdef LM3S_GPIOH_BASE
static const uint32_t g_gpiobase[8] =
{
LM3S_GPIOA_BASE, LM3S_GPIOB_BASE, LM3S_GPIOC_BASE, LM3S_GPIOD_BASE,
@ -67,6 +68,15 @@ static const uint32_t g_gpiobase[8] =
};
static const char g_portchar[8] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
#else
static const uint32_t g_gpiobase[8] =
{
LM3S_GPIOA_BASE, LM3S_GPIOB_BASE, LM3S_GPIOC_BASE, LM3S_GPIOD_BASE,
LM3S_GPIOE_BASE, LM3S_GPIOF_BASE, LM3S_GPIOG_BASE, 0,
};
static const char g_portchar[8] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', '?' };
#endif
/****************************************************************************
* Private Functions
@ -123,6 +133,7 @@ int lm3s_dumpgpio(uint32_t pinset, const char *msg)
/* Get the base address associated with the GPIO port */
base = lm3s_gpiobaseaddress(port);
DEBUGASSERT(base != 0);
/* The following requires exclusive access to the GPIO registers */

4
arch/arm/src/lm3s/lm3s_ethernet.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/arm/src/lm3s/lm3s_ethernet.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -1068,7 +1068,7 @@ static int lm3s_ifup(struct uip_driver_s *dev)
/* Setup the time stamp configuration register */
#ifndef CONFIG_ARCH_CHIP_LM3S6918
#if !defined(CONFIG_ARCH_CHIP_LM3S6918) && !defined(CONFIG_ARCH_CHIP_LM3S6965)
regval = lm3s_ethin(priv, LM3S_MAC_TS_OFFSET);
#ifdef CONFIG_LM3S_TIMESTAMP
regval |= MAC_TS_EN;

6
arch/arm/src/lm3s/lm3s_ethernet.h
View File

@ -1,7 +1,7 @@
/************************************************************************************
* arch/arm/src/lm3s/lm3s_ethernet.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -66,7 +66,7 @@
#define LM3S_MAC_MRXD_OFFSET 0x030 /* Ethernet MAC Management Receive Data */
#define LM3S_MAC_NP_OFFSET 0x034 /* Ethernet MAC Number of Packets */
#define LM3S_MAC_TR_OFFSET 0x038 /* Ethernet MAC Transmission Request */
#ifndef CONFIG_ARCH_CHIP_LM3S6918
#if !defined(CONFIG_ARCH_CHIP_LM3S6918) && !defined(CONFIG_ARCH_CHIP_LM3S6965)
# define LM3S_MAC_TS_OFFSET 0x03c /* Ethernet MAC Time Stamp Configuration */
#endif
@ -89,7 +89,7 @@
#define LM3S_MAC_MRXD (LM3S_ETHCON_BASE + LM3S_MAC_MRXD_OFFSET)
#define LM3S_MAC_NP (LM3S_ETHCON_BASE + LM3S_MAC_NP_OFFSET)
#define LM3S_MAC_TR (LM3S_ETHCON_BASE + LM3S_MAC_TR_OFFSET)
#ifndef CONFIG_ARCH_CHIP_LM3S6918
#if !defined(CONFIG_ARCH_CHIP_LM3S6918) && !defined(CONFIG_ARCH_CHIP_LM3S6965)
# define LM3S_MAC_TS (LM3S_ETHCON_BASE + LM3S_MAC_TS_OFFSET)
#endif

12
arch/arm/src/lm3s/lm3s_gpio.c
View File

@ -2,7 +2,7 @@
* arch/arm/src/lm3s/lm3s_gpio.c
* arch/arm/src/chip/lm3s_gpio.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -140,11 +140,18 @@ static const struct gpio_func_s g_funcbits[] =
{GPIO_INTERRUPT_SETBITS, GPIO_INTERRUPT_CLRBITS}, /* GPIO_FUNC_INTERRUPT */
};
static const uint32_t g_gpiobase[] =
#ifdef LM3S_GPIOH_BASE
{
LM3S_GPIOA_BASE, LM3S_GPIOB_BASE, LM3S_GPIOC_BASE, LM3S_GPIOD_BASE,
LM3S_GPIOE_BASE, LM3S_GPIOF_BASE, LM3S_GPIOG_BASE, LM3S_GPIOH_BASE,
};
#else
static const uint32_t g_gpiobase[] =
{
LM3S_GPIOA_BASE, LM3S_GPIOB_BASE, LM3S_GPIOC_BASE, LM3S_GPIOD_BASE,
LM3S_GPIOE_BASE, LM3S_GPIOF_BASE, LM3S_GPIOG_BASE, 0,
};
#endif
/****************************************************************************
* Public Data
@ -704,6 +711,7 @@ int lm3s_configgpio(uint32_t cfgset)
/* Get the base address associated with the GPIO port */
base = lm3s_gpiobaseaddress(port);
DEBUGASSERT(base != 0);
/* The following requires exclusive access to the GPIO registers */

68
arch/arm/src/lm3s/lm3s_gpio.h
View File

@ -48,42 +48,38 @@
/* GPIO Register Offsets ************************************************************/
#ifdef CONFIG_ARCH_CHIP_LM3S6918
# define LM3S_GPIO_DATA_OFFSET 0x000 /* GPIO Data */
# define LM3S_GPIO_DIR_OFFSET 0x400 /* GPIO Direction */
# define LM3S_GPIO_IS_OFFSET 0x404 /* GPIO Interrupt Sense */
# define LM3S_GPIO_IBE_OFFSET 0x408 /* GPIO Interrupt Both Edges */
# define LM3S_GPIO_IEV_OFFSET 0x40c /* GPIO Interrupt Event */
# define LM3S_GPIO_IM_OFFSET 0x410 /* GPIO Interrupt Mask */
# define LM3S_GPIO_RIS_OFFSET 0x414 /* GPIO Raw Interrupt Status */
# define LM3S_GPIO_MIS_OFFSET 0x418 /* GPIO Masked Interrupt Status */
# define LM3S_GPIO_ICR_OFFSET 0x41c /* GPIO Interrupt Clear */
# define LM3S_GPIO_AFSEL_OFFSET 0x420 /* GPIO Alternate Function */
# define LM3S_GPIO_DR2R_OFFSET 0x500 /* Select GPIO 2-mA Drive Select */
# define LM3S_GPIO_DR4R_OFFSET 0x504 /* GPIO 4-mA Drive Select */
# define LM3S_GPIO_DR8R_OFFSET 0x508 /* GPIO 8-mA Drive Select */
# define LM3S_GPIO_ODR_OFFSET 0x50c /* GPIO Open Drain Select */
# define LM3S_GPIO_PUR_OFFSET 0x510 /* GPIO Pull-Up Select */
# define LM3S_GPIO_PDR_OFFSET 0x514 /* GPIO Pull-Down Select */
# define LM3S_GPIO_SLR_OFFSET 0x518 /* GPIO Slew Rate Control Select */
# define LM3S_GPIO_DEN_OFFSET 0x51C /* GPIO Digital Enable */
# define LM3S_GPIO_LOCK_OFFSET 0x520 /* GPIO Lock */
# define LM3S_GPIO_CR_OFFSET 0x524 /* GPIO Commit */
# define LM3S_GPIO_PERIPHID4_OFFSET 0xfd0 /* GPIO Peripheral Identification 4 */
# define LM3S_GPIO_PERIPHID5_OFFSET 0xfd4 /* GPIO Peripheral Identification 5 */
# define LM3S_GPIO_PERIPHID6_OFFSET 0xfd8 /* GPIO Peripheral Identification 6 */
# define LM3S_GPIO_PERIPHID7_OFFSET 0xfdc /* GPIO Peripheral Identification 7 */
# define LM3S_GPIO_PERIPHID0_OFFSET 0xfe0 /* GPIO Peripheral Identification 0 */
# define LM3S_GPIO_PERIPHID1_OFFSET 0xfe4 /* GPIO Peripheral Identification 1 */
# define LM3S_GPIO_PERIPHID2_OFFSET 0xfe8 /* GPIO Peripheral Identification 2 */
# define LM3S_GPIO_PERIPHID3_OFFSET 0xfec /* GPIO Peripheral Identification 3 */
# define LM3S_GPIO_PCELLID0_OFFSET 0xff0 /* GPIO PrimeCell Identification 0 */
# define LM3S_GPIO_PCELLID1_OFFSET 0xff4 /* GPIO PrimeCell Identification 1 */
# define LM3S_GPIO_PCELLID2_OFFSET 0xff8 /* GPIO PrimeCell Identification 2 */
# define LM3S_GPIO_PCELLID3_OFFSET 0xffc /* GPIO PrimeCell Identification 3*/
#else
# error "GPIO register offsets not specified for this LM3S chip"
#endif
#define LM3S_GPIO_DATA_OFFSET 0x000 /* GPIO Data */
#define LM3S_GPIO_DIR_OFFSET 0x400 /* GPIO Direction */
#define LM3S_GPIO_IS_OFFSET 0x404 /* GPIO Interrupt Sense */
#define LM3S_GPIO_IBE_OFFSET 0x408 /* GPIO Interrupt Both Edges */
#define LM3S_GPIO_IEV_OFFSET 0x40c /* GPIO Interrupt Event */
#define LM3S_GPIO_IM_OFFSET 0x410 /* GPIO Interrupt Mask */
#define LM3S_GPIO_RIS_OFFSET 0x414 /* GPIO Raw Interrupt Status */
#define LM3S_GPIO_MIS_OFFSET 0x418 /* GPIO Masked Interrupt Status */
#define LM3S_GPIO_ICR_OFFSET 0x41c /* GPIO Interrupt Clear */
#define LM3S_GPIO_AFSEL_OFFSET 0x420 /* GPIO Alternate Function */
#define LM3S_GPIO_DR2R_OFFSET 0x500 /* Select GPIO 2-mA Drive Select */
#define LM3S_GPIO_DR4R_OFFSET 0x504 /* GPIO 4-mA Drive Select */
#define LM3S_GPIO_DR8R_OFFSET 0x508 /* GPIO 8-mA Drive Select */
#define LM3S_GPIO_ODR_OFFSET 0x50c /* GPIO Open Drain Select */
#define LM3S_GPIO_PUR_OFFSET 0x510 /* GPIO Pull-Up Select */
#define LM3S_GPIO_PDR_OFFSET 0x514 /* GPIO Pull-Down Select */
#define LM3S_GPIO_SLR_OFFSET 0x518 /* GPIO Slew Rate Control Select */
#define LM3S_GPIO_DEN_OFFSET 0x51C /* GPIO Digital Enable */
#define LM3S_GPIO_LOCK_OFFSET 0x520 /* GPIO Lock */
#define LM3S_GPIO_CR_OFFSET 0x524 /* GPIO Commit */
#define LM3S_GPIO_PERIPHID4_OFFSET 0xfd0 /* GPIO Peripheral Identification 4 */
#define LM3S_GPIO_PERIPHID5_OFFSET 0xfd4 /* GPIO Peripheral Identification 5 */
#define LM3S_GPIO_PERIPHID6_OFFSET 0xfd8 /* GPIO Peripheral Identification 6 */
#define LM3S_GPIO_PERIPHID7_OFFSET 0xfdc /* GPIO Peripheral Identification 7 */
#define LM3S_GPIO_PERIPHID0_OFFSET 0xfe0 /* GPIO Peripheral Identification 0 */
#define LM3S_GPIO_PERIPHID1_OFFSET 0xfe4 /* GPIO Peripheral Identification 1 */
#define LM3S_GPIO_PERIPHID2_OFFSET 0xfe8 /* GPIO Peripheral Identification 2 */
#define LM3S_GPIO_PERIPHID3_OFFSET 0xfec /* GPIO Peripheral Identification 3 */
#define LM3S_GPIO_PCELLID0_OFFSET 0xff0 /* GPIO PrimeCell Identification 0 */
#define LM3S_GPIO_PCELLID1_OFFSET 0xff4 /* GPIO PrimeCell Identification 1 */
#define LM3S_GPIO_PCELLID2_OFFSET 0xff8 /* GPIO PrimeCell Identification 2 */
#define LM3S_GPIO_PCELLID3_OFFSET 0xffc /* GPIO PrimeCell Identification 3*/
/* GPIO Register Addresses **********************************************************/

25
arch/arm/src/lm3s/lm3s_gpioirq.c
View File

@ -2,7 +2,7 @@
* arch/arm/src/lm3s/lm3s_gpioirq.c
* arch/arm/src/chip/lm3s_gpioirq.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -72,27 +72,43 @@ static const uint32_t g_gpiobase[] =
{
#ifndef CONFIG_LM3S_DISABLE_GPIOA_IRQS
LM3S_GPIOA_BASE,
#else
0,
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOB_IRQS
LM3S_GPIOB_BASE,
#else
0,
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOC_IRQS
LM3S_GPIOC_BASE,
#else
0,
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOD_IRQS
LM3S_GPIOD_BASE,
#else
0,
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOE_IRQS
LM3S_GPIOE_BASE,
#else
0,
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOF_IRQS
LM3S_GPIOF_BASE,
#else
0,
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOG_IRQS
LM3S_GPIOG_BASE,
#else
0,
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOH_IRQS
#if !defined(CONFIG_LM3S_DISABLE_GPIOH_IRQS) && defined(LM3S_GPIOH_BASE)
LM3S_GPIOH_BASE,
#else
0,
#endif
};
@ -210,7 +226,7 @@ static int lm3s_gpioghandler(int irq, FAR void *context)
}
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOH_IRQS
#if !defined(CONFIG_LM3S_DISABLE_GPIOH_IRQS) && defined(LM3S_GPIOH_BASE)
static int lm3s_gpiohhandler(int irq, FAR void *context)
{
return lm3s_gpiohandler(LM3S_GPIOH_BASE, LM3S_IRQ_GPIOH_0, context);
@ -263,7 +279,7 @@ int gpio_irqinitialize(void)
#ifndef CONFIG_LM3S_DISABLE_GPIOG_IRQS
irq_attach(LM3S_IRQ_GPIOG, lm3s_gpioghandler);
#endif
#ifndef CONFIG_LM3S_DISABLE_GPIOH_IRQS
#if !defined(CONFIG_LM3S_DISABLE_GPIOH_IRQS) && defined(LM3S_GPIOH_BASE)
irq_attach(LM3S_IRQ_GPIOH, lm3s_gpiohhandler);
#endif
@ -332,6 +348,7 @@ void gpio_irqenable(int irq)
/* Get the base address of the GPIO module associated with this IRQ */
base = lm3s_gpiobaseaddress(gpioirq);
DEBUGASSERT(base != 0);
pin = (1 << (gpioirq & 7));
/* Disable the GPIO interrupt. "The GPIO IM register is the interrupt

6
arch/arm/src/lm3s/lm3s_internal.h
View File

@ -51,7 +51,7 @@
* Pre-processor Definitions
************************************************************************************/
/* The LM3S6918 only supports 8 priority levels. The hardware priority mechanism
/* The LM3S69xx only supports 8 priority levels. The hardware priority mechanism
* will only look at the upper N bits of the 8-bit priority level (where N is 3 for
* the Stellaris family), so any prioritization must be performed in those bits.
* The default priority level is set to the middle value
@ -153,7 +153,7 @@
* hardware function for each pin.
*/
#ifdef CONFIG_ARCH_CHIP_LM3S6918
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
# define GPIO_UART0_RX (GPIO_FUNC_PFINPUT | GPIO_PORTA | 0) /* PA0: UART 0 receive (U0Rx) */
# define GPIO_UART0_TX (GPIO_FUNC_PFOUTPUT | GPIO_PORTA | 1) /* PA1: UART 0 transmit (U0Tx) */
# define GPIO_SSI0_CLK (GPIO_FUNC_PFIO | GPIO_PORTA | 2) /* PA2: SSI0 clock (SSI0Clk) */
@ -191,7 +191,7 @@
# define GPIO_ETHPHY_LED1 (GPIO_FUNC_PFOUTPUT | GPIO_PORTF | 2) /* PF2: LED1 */
# define GPIO_ETHPHY_LED0 (GPIO_FUNC_PFOUTPUT | GPIO_PORTF | 3) /* PF3: LED0 */
# define GPIO_I2C1_SCL (GPIO_FUNC_PFOUTPUT | GPIO_PORTG | 0) /* PG0: I2C1 clock (I2C1SCL) */
#ifdef CONFIG_ARCH_CHIP_LM3S6965
#elif defined(CONFIG_ARCH_CHIP_LM3S6965)
# define GPIO_UART0_RX (GPIO_FUNC_PFINPUT | GPIO_PORTA | 0) /* PA0: UART 0 receive (U0Rx) */
# define GPIO_UART0_TX (GPIO_FUNC_PFOUTPUT | GPIO_PORTA | 1) /* PA1: UART 0 transmit (U0Tx) */
# define GPIO_SSI0_CLK (GPIO_FUNC_PFIO | GPIO_PORTA | 2) /* PA2: SSI0 clock (SSI0Clk) */

1
arch/arm/src/lm3s/lm3s_memorymap.h
View File

@ -167,7 +167,6 @@
# define LM3S_SYSCON_BASE (LM3S_PERIPH_BASE + 0xfe000) /* -0xfefff: System Control */
/* -0x1ffffff: Reserved */
#else
#else
# error "Peripheral base addresses not specified for this LM3S chip"
#endif

6
arch/arm/src/lm3s/lm3s_ssi.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* arch/arm/src/lm32/lm3s_spi.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -77,8 +77,8 @@
#endif
/* How many SSI modules does this chip support? The LM3S6918 supports 2 SSI
* modules (others may support more -- in such case, the following must be
* expanded).
* modules, the LM3S6965 supports 1 module (others may support more than 2-- in
* such case, the following must be expanded).
*/
#if LM3S_NSSI == 0

7
arch/arm/src/lm3s/lm3s_syscontrol.h
View File

@ -1,7 +1,7 @@
/************************************************************************************
* arch/arm/src/lm3s/lm3s_syscontrol.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -48,8 +48,6 @@
/* System Control Register Offsets **************************************************/
#ifdef CONFIG_ARCH_CHIP_LM3S6918
#define LM3S_SYSCON_DID0_OFFSET 0x000 /* Device Identification 0 */
#define LM3S_SYSCON_DID1_OFFSET 0x004 /* Device Identification 1 */
#define LM3S_SYSCON_DC0_OFFSET 0x008 /* Device Capabilities 0 */
@ -79,9 +77,6 @@
#define LM3S_SYSCON_DCGC1_OFFSET 0x124 /* Deep Sleep Mode Clock Gating Control Register 1 */
#define LM3S_SYSCON_DCGC2_OFFSET 0x128 /* Deep Sleep Mode Clock Gating Control Register 2 */
#define LM3S_SYSCON_DSLPCLKCFG_OFFSET 0x144 /* Deep Sleep Clock Configuration*/
#else
# error "System control register offsets not specified for this LM3S chip"
#endif
/* System Control Register Addresses ************************************************/

105
arch/arm/src/lm3s/lm3s_vectors.S
View File

@ -2,7 +2,7 @@
* arch/arm/src/lm3s/lm3s_vectors.S
* arch/arm/src/chip/lm3s_vectors.S
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
@ -127,7 +127,7 @@ lm3s_vectors:
/* External Interrupts */
#ifdef CONFIG_ARCH_CHIP_LM3S6918
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
.word lm3s_gpioa /* Vector 16: GPIO Port A */
.word lm3s_gpiob /* Vector 17: GPIO Port B */
.word lm3s_gpiod /* Vector 18: GPIO Port C */
@ -154,7 +154,7 @@ lm3s_vectors:
.word lm3s_tmr2a /* Vector 39: Timer 2 A */
.word lm3s_tmr2b /* Vector 40: Timer 3 B */
.word lm3s_cmp0 /* Vector 41: Analog Comparator 0 */
.word lm3s_dmp1 /* Vector 42: Analog Comparator 1 */
.word lm3s_cmp1 /* Vector 42: Analog Comparator 1 */
.word lm3s_reserved /* Vector 43: Reserved */
.word lm3s_syscon /* Vector 44: System Control */
.word lm3s_flashcon /* Vector 45: FLASH Control */
@ -183,6 +183,62 @@ lm3s_vectors:
.word lm3s_reserved /* Vector 68: Reserved */
.word lm3s_reserved /* Vector 69: Reserved */
.word lm3s_reserved /* Vector 70: Reserved */
#elif defined(CONFIG_ARCH_CHIP_LM3S6965)
.word lm3s_gpioa /* Vector 16: GPIO Port A */
.word lm3s_gpiob /* Vector 17: GPIO Port B */
.word lm3s_gpiod /* Vector 18: GPIO Port C */
.word lm3s_gpioe /* Vector 19: GPIO Port D */
.word lm3s_gpioe /* Vector 20: GPIO Port E */
.word lm3s_uart0 /* Vector 21: UART 0 */
.word lm3s_uart1 /* Vector 22: UART 1 */
.word lm3s_ssi0 /* Vector 23: SSI 0 */
.word lm3s_i2c0 /* Vector 24: I2C 0 */
.word lm3s_pwmfault /* Vector 25: PWM Fault */
.word lm3s_pwm0 /* Vector 26: PWM Generator 0 */
.word lm3s_pwm1 /* Vector 27: PWM Generator 1 */
.word lm3s_pwm2 /* Vector 28: PWM Generator 2 */
.word lm3s_qei0 /* Vector 29: QEI0 */
.word lm3s_adc0 /* Vector 30: ADC Sequence 0 */
.word lm3s_adc1 /* Vector 31: ADC Sequence 1 */
.word lm3s_adc2 /* Vector 32: ADC Sequence 2 */
.word lm3s_adc3 /* Vector 33: ADC Sequence 3 */
.word lm3s_wdog /* Vector 34: Watchdog Timer */
.word lm3s_tmr0a /* Vector 35: Timer 0 A */
.word lm3s_tmr0b /* Vector 36: Timer 0 B */
.word lm3s_tmr1a /* Vector 37: Timer 1 A */
.word lm3s_tmr1b /* Vector 38: Timer 1 B */
.word lm3s_tmr2a /* Vector 39: Timer 2 A */
.word lm3s_tmr2b /* Vector 40: Timer 3 B */
.word lm3s_cmp0 /* Vector 41: Analog Comparator 0 */
.word lm3s_cmp1 /* Vector 42: Analog Comparator 1 */
.word lm3s_reserved /* Vector 43: Reserved */
.word lm3s_syscon /* Vector 44: System Control */
.word lm3s_flashcon /* Vector 45: FLASH Control */
.word lm3s_gpiof /* Vector 46: GPIO Port F */
.word lm3s_gpiog /* Vector 47: GPIO Port G */
.word lm3s_reserved /* Vector 48: Reserved */
.word lm3s_uart2 /* Vector 49: UART 2 */
.word lm3s_reserved /* Vector 50: Reserved */
.word lm3s_tmr3a /* Vector 51: Timer 3 A */
.word lm3s_tmr3b /* Vector 52: Timer 3 B */
.word lm3s_i2c1 /* Vector 53: I2C 1 */
.word lm3s_qei1 /* Vector 54: QEI1 */
.word lm3s_reserved /* Vector 55: Reserved */
.word lm3s_reserved /* Vector 56: Reserved */
.word lm3s_reserved /* Vector 57: Reserved */
.word lm3s_eth /* Vector 58: Ethernet Controller */
.word lm3s_hib /* Vector 59: Hibernation Module */
.word lm3s_reserved /* Vector 60: Reserved */
.word lm3s_reserved /* Vector 61: Reserved */
.word lm3s_reserved /* Vector 62: Reserved */
.word lm3s_reserved /* Vector 63: Reserved */
.word lm3s_reserved /* Vector 64: Reserved */
.word lm3s_reserved /* Vector 65: Reserved */
.word lm3s_reserved /* Vector 66: Reserved */
.word lm3s_reserved /* Vector 67: Reserved */
.word lm3s_reserved /* Vector 68: Reserved */
.word lm3s_reserved /* Vector 69: Reserved */
.word lm3s_reserved /* Vector 70: Reserved */
#else
# error "Vectors not specified for this LM3S chip"
#endif
@ -207,7 +263,7 @@ handlers:
HANDLER lm3s_pendsv, LM3S_IRQ_PENDSV /* Vector 14: Penable system service request */
HANDLER lm3s_systick, LM3S_IRQ_SYSTICK /* Vector 15: System tick */
#ifdef CONFIG_ARCH_CHIP_LM3S6918
#if defined(CONFIG_ARCH_CHIP_LM3S6918)
HANDLER lm3s_gpioa, LM3S_IRQ_GPIOA /* Vector 16: GPIO Port A */
HANDLER lm3s_gpiob, LM3S_IRQ_GPIOB /* Vector 17: GPIO Port B */
HANDLER lm3s_gpioc, LM3S_IRQ_GPIOC /* Vector 18: GPIO Port C */
@ -229,7 +285,7 @@ handlers:
HANDLER lm3s_tmr2a, LM3S_IRQ_TIMER2A /* Vector 39: Timer 2 A */
HANDLER lm3s_tmr2b, LM3S_IRQ_TIMER2B /* Vector 40: Timer 3 B */
HANDLER lm3s_cmp0, LM3S_IRQ_COMPARE0 /* Vector 41: Analog Comparator 0 */
HANDLER lm3s_dmp1, LM3S_IRQ_COMPARE1 /* Vector 42: Analog Comparator 1 */
HANDLER lm3s_cmp1, LM3S_IRQ_COMPARE1 /* Vector 42: Analog Comparator 1 */
HANDLER lm3s_syscon, LM3S_IRQ_SYSCON /* Vector 44: System Control */
HANDLER lm3s_flashcon, LM3S_IRQ_FLASHCON /* Vector 45: FLASH Control */
HANDLER lm3s_gpiof, LM3S_IRQ_GPIOF /* Vector 46: GPIO Port F */
@ -241,6 +297,45 @@ handlers:
HANDLER lm3s_i2c1, LM3S_IRQ_I2C1 /* Vector 53: I2C 1 */
HANDLER lm3s_eth, LM3S_IRQ_ETHCON /* Vector 58: Ethernet Controller */
HANDLER lm3s_hib, LM3S_IRQ_HIBERNATE /* Vector 59: Hibernation Module */
#elif defined(CONFIG_ARCH_CHIP_LM3S6965)
HANDLER lm3s_gpioa, LM3S_IRQ_GPIOA /* Vector 16: GPIO Port A */
HANDLER lm3s_gpiob, LM3S_IRQ_GPIOB /* Vector 17: GPIO Port B */
HANDLER lm3s_gpioc, LM3S_IRQ_GPIOC /* Vector 18: GPIO Port C */
HANDLER lm3s_gpiod, LM3S_IRQ_GPIOD /* Vector 19: GPIO Port D */
HANDLER lm3s_gpioe, LM3S_IRQ_GPIOE /* Vector 20: GPIO Port E */
HANDLER lm3s_uart0, LM3S_IRQ_UART0 /* Vector 21: UART 0 */
HANDLER lm3s_uart1, LM3S_IRQ_UART1 /* Vector 22: UART 1 */
HANDLER lm3s_ssi0, LM3S_IRQ_SSI0 /* Vector 23: SSI 0 */
HANDLER lm3s_i2c0, LM3S_IRQ_I2C0 /* Vector 24: I2C 0 */
HANDLER lm3s_pwmfault, LM3S_IRQ_PWMFAULT /* Vector 25: PWM Fault */
HANDLER lm3s_pwm0, LM3S_IRQ_PWM0 /* Vector 26: PWM Generator 0 */
HANDLER lm3s_pwm1, LM3S_IRQ_PWM1 /* Vector 27: PWM Generator 1 */
HANDLER lm3s_pwm2, LM3S_IRQ_PWM2 /* Vector 28: PWM Generator 2 */
HANDLER lm3s_qei0, LM3S_IRQ_QEI0 /* Vector 29: QEI 0 */
HANDLER lm3s_adc0, LM3S_IRQ_ADC0 /* Vector 30: ADC Sequence 0 */
HANDLER lm3s_adc1, LM3S_IRQ_ADC1 /* Vector 31: ADC Sequence 1 */
HANDLER lm3s_adc2, LM3S_IRQ_ADC2 /* Vector 32: ADC Sequence 2 */
HANDLER lm3s_adc3, LM3S_IRQ_ADC3 /* Vector 33: ADC Sequence 3 */
HANDLER lm3s_wdog, LM3S_IRQ_WDOG /* Vector 34: Watchdog Timer */
HANDLER lm3s_tmr0a, LM3S_IRQ_TIMER0A /* Vector 35: Timer 0 A */
HANDLER lm3s_tmr0b, LM3S_IRQ_TIMER0B /* Vector 36: Timer 0 B */
HANDLER lm3s_tmr1a, LM3S_IRQ_TIMER1A /* Vector 37: Timer 1 A */
HANDLER lm3s_tmr1b, LM3S_IRQ_TIMER1B /* Vector 38: Timer 1 B */
HANDLER lm3s_tmr2a, LM3S_IRQ_TIMER2A /* Vector 39: Timer 2 A */
HANDLER lm3s_tmr2b, LM3S_IRQ_TIMER2B /* Vector 40: Timer 3 B */
HANDLER lm3s_cmp0, LM3S_IRQ_COMPARE0 /* Vector 41: Analog Comparator 0 */
HANDLER lm3s_cmp1, LM3S_IRQ_COMPARE1 /* Vector 42: Analog Comparator 1 */
HANDLER lm3s_syscon, LM3S_IRQ_SYSCON /* Vector 44: System Control */
HANDLER lm3s_flashcon, LM3S_IRQ_FLASHCON /* Vector 45: FLASH Control */
HANDLER lm3s_gpiof, LM3S_IRQ_GPIOF /* Vector 46: GPIO Port F */
HANDLER lm3s_gpiog, LM3S_IRQ_GPIOG /* Vector 47: GPIO Port G */
HANDLER lm3s_uart2, LM3S_IRQ_UART1 /* Vector 49: UART 1 */
HANDLER lm3s_tmr3a, LM3S_IRQ_TIMER3A /* Vector 51: Timer 3 A */
HANDLER lm3s_tmr3b, LM3S_IRQ_TIMER3B /* Vector 52: Timer 3 B */
HANDLER lm3s_i2c1, LM3S_IRQ_I2C1 /* Vector 53: I2C 1 */
HANDLER lm3s_qei1, LM3S_IRQ_QEI1 /* Vector 54: QEI 1 */
HANDLER lm3s_eth, LM3S_IRQ_ETHCON /* Vector 58: Ethernet Controller */
HANDLER lm3s_hib, LM3S_IRQ_HIBERNATE /* Vector 59: Hibernation Module */
#else
# error "Vectors not specified for this LM3S chip"
#endif

9
configs/README.txt
View File

@ -613,6 +613,11 @@ configs/ez80f0910200zco
development kit, eZ80F091 part, and the Zilog ZDS-II Windows command line
tools. The development environment is Cygwin under WinXP.
configs/lm3s6965-ek
Stellaris LM3S6965 Evaluation Kit. This board is based on the
an ARM Cortex-M3 MCU, the Luminary/TI LM3S6965. This OS is built with the
arm-elf toolchain*. STATUS: This port under development.
configs/m68322evb
This is a work in progress for the venerable m68322evb board from
Motorola. This OS is also built with the arm-elf toolchain*.
@ -635,6 +640,10 @@ configs/ntosd-dm320
STATUS: This port is code complete, verified, and included in the
NuttX 0.2.1 release.
configs/olimex-lpc2378
This port uses the Olimex Olimex-lpc2378 board arm-elf toolchain* under
Linux or Cygwin. STATUS: ostest and NSH configurations available.
configs/olimex-strp711
This port uses the Olimex STR-P711 board arm-elf toolchain* under Linux or Cygwin.
See the http://www.olimex.com/dev/str-p711.html" for futher information.

2
configs/eagle100/README.txt
View File

@ -1,6 +1,8 @@
README
^^^^^^
README file for the Microment Eagle100 NuttX port.
References:
^^^^^^^^^^

346
configs/lm3s6965-ek/README.txt Executable file
View File

@ -0,0 +1,346 @@
README
^^^^^^
README for NuttX port to the Stellaris LMS36965 Evaluation Kit
Development Environment
^^^^^^^^^^^^^^^^^^^^^^^
Either Linux or Cygwin on Windows can be used for the development environment.
The source has been built only using the GNU toolchain (see below). Other
toolchains will likely cause problems. Testing was performed using the Cygwin
environment because the Raisonance R-Link emulatator and some RIDE7 development tools
were used and those tools works only under Windows.
GNU Toolchain Options
^^^^^^^^^^^^^^^^^^^^^
The NuttX make system has been modified to support the following different
toolchain options.
1. The CodeSourcery GNU toolchain,
2. The devkitARM GNU toolchain,
3. Raisonance GNU toolchain, or
4. The NuttX buildroot Toolchain (see below).
All testing has been conducted using the NuttX buildroot toolchain. However,
the make system is setup to default to use the devkitARM toolchain. To use
the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to
add one of the following configuration options to your .config (or defconfig)
file:
CONFIG_LM3S_CODESOURCERYW=y : CodeSourcery under Windows
CONFIG_LM3S_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_LM3S_DEVKITARM=y : devkitARM under Windows
CONFIG_LM3S_RAISONANCE=y : Raisonance RIDE7 under Windows
CONFIG_LM3S_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify
the PATH in the setenv.h file if your make cannot find the tools.
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
performed automatically in the Cygwin makefiles using the 'cygpath' utility
but you might easily find some new path problems. If so, check out 'cygpath -w'
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
are used in Nuttx (e.g., include/arch). The make system works around these
problems for the Windows tools by copying directories instead of linking them.
But this can also cause some confusion for you: For example, you may edit
a file in a "linked" directory and find that your changes had not effect.
That is because you are building the copy of the file in the "fake" symbolic
directory. If you use a Windows toolchain, you should get in the habit of
making like this:
make clean_context all
An alias in your .bashrc file might make that less painful.
3. Dependencies are not made when using Windows versions of the GCC. This is
because the dependencies are generated using Windows pathes which do not
work with the Cygwin make.
Support has been added for making dependencies with the windows-native toolchains.
That support can be enabled by modifying your Make.defs file as follows:
- MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+ MKDEP = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
If you have problems with the dependency build (for example, if you are not
building on C:), then you may need to modify tools/mkdeps.sh
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
-Os.
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
path or will get the wrong version of make.
IDEs
^^^^
NuttX is built using command-line make. It can be used with an IDE, but some
effort will be required to create the project (There is a simple RIDE project
in the RIDE subdirectory). Here are a few tip before you start that effort:
1) Select the toolchain that you will be using in your .config file
2) Start the NuttX build at least one time from the Cygwin command line
before trying to create your project. This is necessary to create
certain auto-generated files and directories that will be needed.
3) Set up include pathes: You will need include/, arch/arm/src/lm3s,
arch/arm/src/common, arch/arm/src/cortexm3, and sched/.
4) All assembly files need to have the definition option -D __ASSEMBLY__
on the command line.
Startup files will probably cause you some headaches. The NuttX startup file
is arch/arm/src/lm3s/lm3s_vectors.S. With RIDE, I have to build NuttX
one time from the Cygwin command line in order to obtain the pre-built
startup object needed by RIDE.
NuttX buildroot Toolchain
^^^^^^^^^^^^^^^^^^^^^^^^^
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
different from the default in your PATH variable).
If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
cd tools
./configure.sh lm3s6965-ek/<sub-dir>
2. Download the latest buildroot package into <some-dir>
3. unpack the buildroot tarball. The resulting directory may
have versioning information on it like buildroot-x.y.z. If so,
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
4. cd <some-dir>/buildroot
5. cp configs/cortexm3-defconfig-4.3.3 .config
6. make oldconfig
7. make
8. Edit setenv.h, if necessary, so that the PATH variable includes
the path to the newly built binaries.
See the file configs/README.txt in the buildroot source tree. That has more
detailed PLUS some special instructions that you will need to follow if you are
building a Cortex-M3 toolchain for Cygwin under Windows.
Ethernet-Bootloader
^^^^^^^^^^^^^^^^^^^
Here are some notes about using the Luminary Ethernet boot-loader built
into the Stellaris LM3S6965 Evaluation Kit.
Built-In Application:
- The board has no fixed IP address but uses DHCP to get an address.
I used a D-link router; I can use a web browser to surf to the D-link
web page to get the address assigned by DHCP.
- Then you can use this IP address in your browser to surf to the evaluation
board. It presents several interesting pages -- the most important is
the page called "Firmware Update". That page includes instructions on
how to download code to the evaluation board.
- After you burn the first program, you lose this application. Then you
will probably be better off connected directly to the Stellaris LM3S6965
Evaluation Kit or through a switch (The router caused problems for me
during downloads).
Using the Ethernet Bootloader:
- You will need the "LM Flash Programmer application". You can get that
program from the Luminary web site. There is a link on the LM3S6918 page.
- Is there any documentation for using the bootloader? Yes and No: There
is an application note covering the bootloader on the Luminary site, but
it is not very informative.
- Are there any special things I have to do in my code, other than setting
the origin to 0x0000:2000 (APP_START_ADDRESS)? No. The bootloader assumes
that you have a vector table at that address . The bootloader does the
following each time it boots (after you have downloaded the first valid
application):
o The bootloader sets the vector table register to the APP_START_ADDRESS,
o It sets the stack pointer to the address at APP_START_ADDRESS, and then
o Jumps to the address at APP_START_ADDRESS+4.
- You can force the bootloader to skip starting the application and stay
in the update mode. You will need to do this in order to download a new
application. You force the update mode by holding the user button on the
Stellaris LM3S6965 Evaluation Kit while resetting the board. The user
button is GPIOA, pin 6 (call FORCED_UPDATE_PIN in the bootloader code).
- Note 1: I had to remove my D-Link router from the configuration in order
to use the LM Flash Programmer (the Bootloader issues BOOTP requests to
communicate with the LM Flash Programmer, my router was responding to
these BOOTP requests and hosing the download). It is safer to connect
via a switch or via an Ethernet switch.
- Note 2: You don't need the router's DHCPD server in the download
configuration; the Luminary Flash Programmer has the capability of
temporarily assigning the IP address to the Stellaris LM3S6965 Evaluation
Kit via BOOTP.
Stellaris LM3S6965 Evaluation Kit Configuration Options
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
CONFIG_ARCH=arm
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH_ARM=y
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CHIP=lm3s
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
chip:
CONFIG_ARCH_CHIP_LM3S6965
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_BOARD=lm3s6965-ek (for the Stellaris LM3S6965 Evaluation Kit)
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_BOARD_LM3S6965EK
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
CONFIG_DRAM_SIZE=0x00010000 (64Kb)
CONFIG_DRAM_START - The start address of installed DRAM
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_END - Last address+1 of installed RAM
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
cause a 100 second delay during boot-up. This 100 second delay
serves no purpose other than it allows you to calibratre
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
the delay actually is 100 seconds.
LM3S6818 specific device driver settings
CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
console and ttys0 (default is the UART0).
CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_UARTn_2STOP - Two stop bits
CONFIG_SSI0_DISABLE - Select to disable support for SSI0
CONFIG_SSI1_DISABLE - Select to disable support for SSI1
CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support.
Poll-waiting is recommended if the interrupt rate would be to
high in the interrupt driven case.
CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
emptying the Rx FIFO. If the SPI frequency is high and this
value is large, then larger values of this setting may cause
Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET)
to build the LM3S Ethernet driver
CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board.
CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide
a MAC address (via lm3s_ethernetmac()), then this should be selected.
CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation
CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation
CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding
CONFIG_LM3S_MULTICAST - Set to enable multicast frames
CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode
CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection.
CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console.
Configurations
^^^^^^^^^^^^^^
Each Stellaris LM3S6965 Evaluation Kit configuration is maintained in a
sudirectory and can be selected as follow:
cd tools
./configure.sh lm3s6965-ek/<subdir>
cd -
. ./setenv.sh
Where <subdir> is one of the following:
nettest:
This configuration directory may be used to enable networking using the
LM3S6918's Ethernet controller. It uses examples/nettest to excercise the
TCP/IP network.
httpd:
This builds the uIP web server example using the examples/uip application
(for execution from FLASH). See examples/README.txt for information
about ostest.
nsh:
Configures the NuttShell (nsh) located at examples/nsh. The
Configuration enables both the serial and telnetd NSH interfaces.
ostest:
This configuration directory, performs a simple OS test using
examples/ostest.
By default, all of these examples are built to be used with the Luminary
Ethernet Bootloader (you can change the ld.script file in any of these
sub-directories to change that configuration).

1
configs/lm3s6965-ek/include/README.txt Executable file
View File

@ -0,0 +1 @@
This directory contains header files unique to the Stellaris LM3S6965 Evaluation Kit.

144
configs/lm3s6965-ek/include/board.h Executable file
View File

@ -0,0 +1,144 @@
/************************************************************************************
* configs/lm3s6965-ek/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include "lm3s_internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* RCC settings */
#define SYSCON_RCC_XTAL SYSCON_RCC_XTAL8000KHZ /* Eagle100 on-board crystall is 8.00 MHz */
#define XTAL_FREQUENCY 8000000
/* Oscillator source is the main oscillator (not internal, internal/4, 30KHz or
* 30KHz from hibernate module) */
#define SYSCON_RCC_OSCSRC SYSCON_RCC_OSCSRC_MOSC
#define SYSCON_RCC2_OSCSRC SYSCON_RCC2_OSCSRC2_MOSC
#define OSCSRC_FREQUENCY XTAL_FREQUENCY
/* Use system divider = 4; this corresponds to a system clock frequency
* of (400 / 2) / 4 = 50MHz
*/
#define LM3S_SYSDIV 4
#define SYSCLK_FREQUENCY 50000000 /* 50MHz */
/* Other RCC settings:
*
* - Main and internal oscillators enabled.
* - PLL and sys dividers not bypassed
* - PLL not powered down
* - No auto-clock gating reset
*/
#define LM3S_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM3S_SYSDIV))
/* RCC2 settings -- RCC2 not used. Other RCC2 settings
*
* - PLL and sys dividers not bypassed.
* - PLL not powered down
* - Not using RCC2
*/
#define LM3S_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(LM3S_SYSDIV))
/* LED definitions ******************************************************************/
/* The Eagle-100 has only one user LED: Port E, Bit 1. Below is the mapping of this
* single LED. From this single LED, we can get the following information:
*
* OFF Steady: The system has failed to boot to the point of enabling interrupts
* ON Steady: The systems has enabled interrupts, but none have been received
* Dull glow: The system is taking interrupts
* Slow blinking: The system has panicked
*/
/* ON OFF */
#define LED_STARTED 0 /* OFF OFF */
#define LED_HEAPALLOCATE 1 /* OFF OFF */
#define LED_IRQSENABLED 2 /* ON ON */
#define LED_STACKCREATED 3 /* ON ON */
#define LED_INIRQ 4 /* ON OFF */
#define LED_SIGNAL 5 /* ON OFF */
#define LED_ASSERTION 6 /* ON OFF */
#define LED_PANIC 7 /* ON OFF */
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Name: lm3s_boardinitialize
*
* Description:
* All LM3S architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
extern void lm3s_boardinitialize(void);
/************************************************************************************
* Name: lm3s_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM3S_BOARDMAC
struct ether_addr;
extern void lm3s_ethernetmac(struct ether_addr *ethaddr);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

168
configs/lm3s6965-ek/ostest/Make.defs Executable file
View File

@ -0,0 +1,168 @@
############################################################################
# configs/lm3s6965-ek/ostest/Make.defs
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_LM3S_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_LM3S_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_LM3S_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_LM3S_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_LM3S_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

607
configs/lm3s6965-ek/ostest/defconfig Executable file
View File

@ -0,0 +1,607 @@
############################################################################
# configs/lm3s6965-ek/ostest/defconfig
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
#
# architecture selection
#
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
# processor architecture.
# CONFIG_ARCH_family - for use in C code. This identifies the
# particular chip family that the architecture is implemented
# in.
# CONFIG_ARCH_architecture - for use in C code. This identifies the
# specific architecture within the chip familyl.
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
# CONFIG_ARCH_CHIP_name - For use in C code
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
# the board that supports the particular chip or SoC.
# CONFIG_ARCH_BOARD_name - for use in C code
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
# CONFIG_DRAM_START - The start address of DRAM (physical)
# CONFIG_DRAM_END - Last address+1 of installed RAM
# CONFIG_ARCH_IRQPRIO - The LM3S6965 supports interrupt prioritization
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
# stack. If defined, this symbol is the size of the interrupt
# stack in bytes. If not defined, the user task stacks will be
# used during interrupt handling.
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
# cause a 100 second delay during boot-up. This 100 second delay
# serves no purpose other than it allows you to calibratre
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
# the delay actually is 100 seconds.
#
CONFIG_ARCH=arm
CONFIG_ARCH_ARM=y
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_CHIP=lm3s
CONFIG_ARCH_CHIP_LM3S6965=y
CONFIG_ARCH_BOARD=lm3s6965-ek
CONFIG_ARCH_BOARD_LM3S6965EK=y
CONFIG_BOARD_LOOPSPERMSEC=4531
CONFIG_DRAM_SIZE=0x00010000
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_ARCH_IRQPRIO=y
CONFIG_DRAM_NUTTXENTRY=0x00002000
CONFIG_ARCH_INTERRUPTSTACK=n
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_CALIBRATION=n
#
# Identify toolchain and linker options
#
CONFIG_LM3S_CODESOURCERYW=n
CONFIG_LM3S_CODESOURCERYL=n
CONFIG_LM3S_DEVKITARM=n
CONFIG_LM3S_RAISONANCE=n
CONFIG_LM3S_BUILDROOT=y
CONFIG_LM3S_DFU=y
#
# LM3S6965 specific serial device driver settings
#
# CONFIG_UARTn_DISABLE - select to disable all support for
# the UART
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
# console and ttys0 (default is the UART0).
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
# This specific the size of the receive buffer
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
# being sent. This specific the size of the transmit buffer
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
# CONFIG_UARTn_2STOP - Two stop bits
#
CONFIG_UART0_DISABLE=n
CONFIG_UART1_DISABLE=y
CONFIG_UART2_DISABLE=y
CONFIG_UART0_SERIAL_CONSOLE=y
CONFIG_UART1_SERIAL_CONSOLE=n
CONFIG_UART2_SERIAL_CONSOLE=n
CONFIG_UART0_TXBUFSIZE=256
CONFIG_UART1_TXBUFSIZE=256
CONFIG_UART2_TXBUFSIZE=256
CONFIG_UART0_RXBUFSIZE=256
CONFIG_UART1_RXBUFSIZE=256
CONFIG_UART2_RXBUFSIZE=256
CONFIG_UART0_BAUD=115200
CONFIG_UART1_BAUD=115200
CONFIG_UART2_BAUD=115200
CONFIG_UART0_BITS=8
CONFIG_UART1_BITS=8
CONFIG_UART2_BITS=8
CONFIG_UART0_PARITY=0
CONFIG_UART1_PARITY=0
CONFIG_UART2_PARITY=0
CONFIG_UART0_2STOP=0
CONFIG_UART1_2STOP=0
CONFIG_UART2_2STOP=0
#
# LM3S6965 specific SSI device driver settings
#
# CONFIG_SSIn_DISABLE - select to disable all support for
# the SSI
# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support
# Poll-waiting is recommended if the interrupt rate would be to
# high in the interrupt driven case.
# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
# emptying the Rx FIFO. If the SPI frequency is high and this
# value is large, then larger values of this setting may cause
# Rx FIFO overrun errors. Default: half of the Tx FIFO size (4).
#
CONFIG_SSI0_DISABLE=n
CONFIG_SSI1_DISABLE=y
CONFIG_SSI_POLLWAIT=y
#CONFIG_SSI_TXLIMIT=4
#
# LM3S6965 specific serial device driver settings
#
# CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET)
# to build the LM3S Ethernet driver
# CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board.
# CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide
# a MAC address (via lm3s_ethernetmac()), then this should be selected.
# CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation
# CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation
# CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding
# CONFIG_LM3S_MULTICAST - Set to enable multicast frames
# CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode
# CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection.
# CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console.
#
CONFIG_LM3S_ETHERNET=n
CONFIG_LM3S_ETHLEDS=n
CONFIG_LM3S_BOARDMAC=y
CONFIG_LM3S_ETHHDUPLEX=n
CONFIG_LM3S_ETHNOAUTOCRC=n
CONFIG_LM3S_ETHNOPAD=n
CONFIG_LM3S_MULTICAST=n
CONFIG_LM3S_PROMISCUOUS=n
CONFIG_LM3S_BADCRC=n
CONFIG_LM3S_DUMPPACKET=n
#
# General build options
#
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
# used with many different loaders using the GNU objcopy program
# Should not be selected if you are not using the GNU toolchain.
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
# used with many different loaders using the GNU objcopy program
# Should not be selected if you are not using the GNU toolchain.
# CONFIG_RAW_BINARY - make a raw binary format file used with many
# different loaders using the GNU objcopy program. This option
# should not be selected if you are not using the GNU toolchain.
# CONFIG_HAVE_LIBM - toolchain supports libm.a
#
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=n
CONFIG_MOTOROLA_SREC=n
CONFIG_RAW_BINARY=y
CONFIG_HAVE_LIBM=n
#
# General OS setup
#
# CONFIG_EXAMPLE - identifies the subdirectory in examples
# that will be used in the build
# CONFIG_DEBUG - enables built-in debug options
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
# debug symbols (needed for use with a debugger).
# CONFIG_MM_REGIONS - If the architecture includes multiple
# regions of memory to allocate from, this specifies the
# number of memory regions that the memory manager must
# handle and enables the API mm_addregion(start, end);
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
# time console output
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
# or TICKS_PER_MSEC=10. This setting may be defined to
# inform NuttX that the processor hardware is providing
# system timer interrupts at some interrupt interval other
# than 10 msec.
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
# this number of milliseconds; Round robin scheduling can
# be disabled by setting this value to zero.
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
# scheduler to monitor system performance
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
# task name to save in the TCB. Useful if scheduler
# instrumentation is selected. Set to zero to disable.
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
# Used to initialize the internal time logic.
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
# You would only need this if you are concerned about accurate
# time conversions in the past or in the distant future.
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
# would only need this if you are concerned about accurate
# time conversion in the distand past. You must also define
# CONFIG_GREGORIAN_TIME in order to use Julian time.
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
# provides /dev/console. Enables stdout, stderr, stdin.
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
# driver (minimul support)
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
# errorcheck mutexes. Enables pthread_mutexattr_settype().
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
# inheritance on mutexes and semaphores.
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
# inheritance is enabled. It defines the maximum number of
# different threads (minus one) that can take counts on a
# semaphore with priority inheritance support. This may be
# set to zero if priority inheritance is disabled OR if you
# are only using semaphores as mutexes (only one holder) OR
# if no more than two threads participate using a counting
# semaphore.
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
# then this setting is the maximum number of higher priority
# threads (minus 1) than can be waiting for another thread
# to release a count on a semaphore. This value may be set
# to zero if no more than one thread is expected to wait for
# a semaphore.
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
# by task_create() when a new task is started. If set, all
# files/drivers will appear to be closed in the new task.
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
# three file descriptors (stdin, stdout, stderr) by task_create()
# when a new task is started. If set, all files/drivers will
# appear to be closed in the new task except for stdin, stdout,
# and stderr.
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
# desciptors by task_create() when a new task is started. If
# set, all sockets will appear to be closed in the new task.
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
# This format will support execution of NuttX binaries located
# in a ROMFS filesystem (see examples/nxflat).
#
CONFIG_EXAMPLE=ostest
CONFIG_DEBUG=n
CONFIG_DEBUG_VERBOSE=n
CONFIG_DEBUG_SYMBOLS=n
CONFIG_MM_REGIONS=1
CONFIG_ARCH_LOWPUTC=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_INSTRUMENTATION=n
CONFIG_TASK_NAME_SIZE=0
CONFIG_START_YEAR=2010
CONFIG_START_MONTH=5
CONFIG_START_DAY=6
CONFIG_GREGORIAN_TIME=n
CONFIG_JULIAN_TIME=n
CONFIG_DEV_CONSOLE=y
CONFIG_DEV_LOWCONSOLE=y
CONFIG_MUTEX_TYPES=n
CONFIG_PRIORITY_INHERITANCE=n
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SEM_NNESTPRIO=0
CONFIG_FDCLONE_DISABLE=n
CONFIG_FDCLONE_STDIO=n
CONFIG_SDCLONE_DISABLE=y
CONFIG_NXFLAT=n
#
# The following can be used to disable categories of
# APIs supported by the OS. If the compiler supports
# weak functions, then it should not be necessary to
# disable functions unless you want to restrict usage
# of those APIs.
#
# There are certain dependency relationships in these
# features.
#
# o mq_notify logic depends on signals to awaken tasks
# waiting for queues to become full or empty.
# o pthread_condtimedwait() depends on signals to wake
# up waiting tasks.
#
CONFIG_DISABLE_CLOCK=n
CONFIG_DISABLE_POSIX_TIMERS=n
CONFIG_DISABLE_PTHREAD=n
CONFIG_DISABLE_SIGNALS=n
CONFIG_DISABLE_MQUEUE=n
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_DISABLE_ENVIRON=y
CONFIG_DISABLE_POLL=y
#
# Misc libc settings
#
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
# little smaller if we do not support fieldwidthes
#
CONFIG_NOPRINTF_FIELDWIDTH=n
#
# Allow for architecture optimized implementations
#
# The architecture can provide optimized versions of the
# following to improve system performance
#
CONFIG_ARCH_MEMCPY=n
CONFIG_ARCH_MEMCMP=n
CONFIG_ARCH_MEMMOVE=n
CONFIG_ARCH_MEMSET=n
CONFIG_ARCH_STRCMP=n
CONFIG_ARCH_STRCPY=n
CONFIG_ARCH_STRNCPY=n
CONFIG_ARCH_STRLEN=n
CONFIG_ARCH_BZERO=n
CONFIG_ARCH_KMALLOC=n
CONFIG_ARCH_KZMALLOC=n
CONFIG_ARCH_KFREE=n
#
# Sizes of configurable things (0 disables)
#
# CONFIG_MAX_TASKS - The maximum number of simultaneously
# active tasks. This value must be a power of two.
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
# of parameters that a task may receive (i.e., maxmum value
# of 'argc')
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
# specific data that can be retained
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
# descriptors (one for each open)
# CONFIG_NFILE_STREAMS - The maximum number of streams that
# can be fopen'ed
# CONFIG_NAME_MAX - The maximum size of a file name.
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_NUNGET_CHARS - Number of characters that can be
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
# structures. The system manages a pool of preallocated
# message structures to minimize dynamic allocations
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
# a fixed payload size given by this settin (does not include
# other message structure overhead.
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
# can be passed to a watchdog handler
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
# structures. The system manages a pool of preallocated
# watchdog structures to minimize dynamic allocations
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
# timer structures. The system manages a pool of preallocated
# timer structures to minimize dynamic allocations. Set to
# zero for all dynamic allocations.
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_STDIO_BUFFER_SIZE=256
CONFIG_NUNGET_CHARS=2
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Filesystem configuration
#
# CONFIG_FS_FAT - Enable FAT filesystem support
# CONFIG_FAT_SECTORSIZE - Max supported sector size
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
CONFIG_FS_FAT=n
CONFIG_FS_ROMFS=n
#
# SPI-based MMC/SD driver
#
# CONFIG_MMCSD_NSLOTS
# Number of MMC/SD slots supported by the driver
# CONFIG_MMCSD_READONLY
# Provide read-only access (default is read/write)
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
# Default is 20MHz.
#
CONFIG_MMCSD_NSLOTS=1
CONFIG_MMCSD_READONLY=n
CONFIG_MMCSD_SPICLOCK=12500000
#
# TCP/IP and UDP support via uIP
# CONFIG_NET - Enable or disable all network features
# CONFIG_NET_IPv6 - Build in support for IPv6
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
# CONFIG_NET_BUFSIZE - uIP buffer size
# CONFIG_NET_TCP - TCP support on or off
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
# accept() is called. The size of the backlog is selected when listen() is called.
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
# CONFIG_NET_UDP - UDP support on or off
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
# CONFIG_NET_ICMP - ICMP ping response support on or off
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
# CONFIG_NET_STATISTICS - uIP statistics on or off
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
# CONFIG_NET_BROADCAST - Broadcast support
# CONFIG_NET_LLH_LEN - The link level header length
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
#
CONFIG_NET=n
CONFIG_NET_IPv6=n
CONFIG_NSOCKET_DESCRIPTORS=0
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_BUFSIZE=420
CONFIG_NET_TCP=n
CONFIG_NET_TCP_CONNS=40
CONFIG_NET_MAX_LISTENPORTS=40
CONFIG_NET_UDP=n
CONFIG_NET_UDP_CHECKSUMS=y
#CONFIG_NET_UDP_CONNS=10
CONFIG_NET_ICMP=n
CONFIG_NET_ICMP_PING=n
#CONFIG_NET_PINGADDRCONF=0
CONFIG_NET_STATISTICS=y
#CONFIG_NET_RECEIVE_WINDOW=
#CONFIG_NET_ARPTAB_SIZE=8
CONFIG_NET_BROADCAST=n
#CONFIG_NET_LLH_LEN=14
#CONFIG_NET_FWCACHE_SIZE=2
#
# UIP Network Utilities
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
#
CONFIG_NET_DHCP_LIGHT=n
CONFIG_NET_RESOLV_ENTRIES=4
#
# Settings for examples/uip
#
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_UIP_DHCPC=n
#
# Settings for examples/nettest
CONFIG_EXAMPLE_NETTEST_SERVER=n
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
CONFIG_EXAMPLE_NETTEST_NOMAC=n
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
#
# Settings for examples/ostest
#
CONFIG_EXAMPLES_OSTEST_LOOPS=1
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
#
# Settings for examples/nsh
#
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
# specific initialization (nsh_archinitialize()).
#
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
#
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
#
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
CONFIG_EXAMPLES_NSH_STRERROR=n
CONFIG_EXAMPLES_NSH_LINELEN=64
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
CONFIG_EXAMPLES_NSH_DISABLEBG=n
CONFIG_EXAMPLES_NSH_ROMFSETC=n
CONFIG_EXAMPLES_NSH_CONSOLE=y
CONFIG_EXAMPLES_NSH_TELNET=n
CONFIG_EXAMPLES_NSH_ARCHINIT=n
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
CONFIG_EXAMPLES_NSH_DHCPC=n
CONFIG_EXAMPLES_NSH_NOMAC=n
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
CONFIG_EXAMPLES_NSH_FATDEVNO=1
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
#
# Architecture-specific NSH options
#
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
#
# Stack and heap information
#
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
# operation from FLASH but must copy initialized .data sections to RAM.
# (should also be =n for the LM3S6965 Eval Kit which always runs from flash)
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
# but copy themselves entirely into RAM for better performance.
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
# all stack operations outside of the nuttx model.
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
# This is the thread that (1) performs the inital boot of the system up
# to the point where user_start() is spawned, and (2) there after is the
# IDLE thread that executes only when there is no other thread ready to
# run.
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
# for the main user thread that begins at the user_start() entry point.
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
# CONFIG_HEAP_BASE - The beginning of the heap
# CONFIG_HEAP_SIZE - The size of the heap
#
CONFIG_BOOT_RUNFROMFLASH=n
CONFIG_BOOT_COPYTORAM=n
CONFIG_CUSTOM_STACK=n
CONFIG_STACK_POINTER=
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
CONFIG_HEAP_BASE=
CONFIG_HEAP_SIZE=

111
configs/lm3s6965-ek/ostest/ld.script Executable file
View File

@ -0,0 +1,111 @@
/****************************************************************************
* configs/lm3s6965-ek/ostest/ld.script
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The LM3S6918 has 256Kb of FLASH beginning at address 0x0000:0000. However,
* if the Ethernet bootloader is used, then the entry point must be at the
* following offset in FLASH (and the size of the FLASH must be reduced to
* 248Kb):
*/
MEMORY
{
/* flash (rx) : ORIGIN = 0x00000000, LENGTH = 256K */
flash (rx) : ORIGIN = 0x00002000, LENGTH = 248K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.); /* See below */
/* The LM3S6918 has 64Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.ARM.exidx : {
__exidx_start = ABSOLUTE(.);
*(.ARM.exidx*)
__exidx_end = ABSOLUTE(.);
} >sram
.bss : { /* BSS */
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

46
configs/lm3s6965-ek/ostest/setenv.sh Executable file
View File

@ -0,0 +1,46 @@
#!/bin/bash
# configs/lm3s6965-ek/ostest/setenv.sh
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

86
configs/lm3s6965-ek/src/Makefile Executable file
View File

@ -0,0 +1,86 @@
############################################################################
# configs/lm3s6965-ek/src/Makefile
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_boot.c up_leds.c up_ethernet.c up_ssi.c
ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
endif
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
@( for obj in $(OBJS) ; do \
$(call ARCHIVE, $@, $${obj}); \
done ; )
.depend: Makefile $(SRCS)
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
@touch $@
depend: .depend
clean:
@rm -f libboard$(LIBEXT) *~ .*.swp
$(call CLEAN)
distclean: clean
@rm -f Make.dep .depend
-include Make.dep

1
configs/lm3s6965-ek/src/README.txt Executable file
View File

@ -0,0 +1 @@
This directory contains drivers unique to the Stellaris LM3S6965 Evaluation Kit.

92
configs/lm3s6965-ek/src/lm3s6965ek_internal.h Executable file
View File

@ -0,0 +1,92 @@
/************************************************************************************
* configs/lm3s6965-ek/src/lm3s6965ek_internal.h
* arch/arm/src/board/lm3s6965ek_internal.n
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_LM3S6965_EK_SRC_LM3S6965EK_INTERNAL_H
#define __CONFIGS_LM3S6965_EK_SRC_LM3S6965EK_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* How many SSI modules does this chip support? The LM3S6965 supports 1 SSI
* module (others may support more than 2 -- in such case, the following must be
* expanded).
*/
#if LM3S_NSSI == 0
# undef CONFIG_SSI0_DISABLE
# define CONFIG_SSI0_DISABLE 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#elif LM3S_NSSI == 1
# undef CONFIG_SSI1_DISABLE
# define CONFIG_SSI1_DISABLE 1
#endif
/* LM3S6965 Eval Kit ***************************************************************/
/* GPIO for microSD card chip select */
#define SDCCS_GPIO (GPIO_FUNC_OUTPUT | GPIO_PADTYPE_STDWPU | GPIO_STRENGTH_4MA | \
GPIO_VALUE_ONE | GPIO_PORTG | 1)
#define LED_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTE | 1)
/************************************************************************************
* Public Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Name: lm3s_ssiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
*
************************************************************************************/
extern void weak_function lm3s_ssiinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_LM3S6965_EK_SRC_LM3S6965EK_INTERNAL_H */

91
configs/lm3s6965-ek/src/up_boot.c Executable file
View File

@ -0,0 +1,91 @@
/************************************************************************************
* configs/lm3s6965-ek/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "lm3s6965ek_internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lm3s_boardinitialize
*
* Description:
* All LM3S architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
************************************************************************************/
void lm3s_boardinitialize(void)
{
/* Configure SPI chip selects if 1) SSI is not disabled, and 2) the weak function
* lm3s_ssiinitialize() has been brought into the link.
*/
/* The LM3S6965 Eval Kit microSD CS is on SSI0 */
#if !defined(CONFIG_SSI0_DISABLE) /* || !defined(CONFIG_SSI1_DISABLE) */
if (lm3s_ssiinitialize)
{
lm3s_ssiinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
up_ledinit();
#endif
}

98
configs/lm3s6965-ek/src/up_ethernet.c Executable file
View File

@ -0,0 +1,98 @@
/************************************************************************************
* configs/lm3s6965-ek/src/up_ethernet.c
* arch/arm/src/board/up_ethernet.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <debug.h>
#include <assert.h>
#include <arch/board/board.h>
#include <net/ethernet.h>
#include "up_arch.h"
#include "chip.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lm3s_ethernetmac
*
* Description:
* For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
* USER0 and USER1 registers. If CONFIG_LM3S_BOARDMAC is defined, this function
* will obtain the MAC address from these registers.
*
************************************************************************************/
#ifdef CONFIG_LM3S_BOARDMAC
void lm3s_ethernetmac(struct ether_addr *ethaddr)
{
uint32_t user0;
uint32_t user1;
/* Get the current value of the user registers */
user0 = getreg32(LM3S_FLASH_USERREG0);
user1 = getreg32(LM3S_FLASH_USERREG1);
nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);
/* Re-format that MAC address the way that uIP expects to see it */
ethaddr->ether_addr_octet[0] = ((user0 >> 0) & 0xff);
ethaddr->ether_addr_octet[1] = ((user0 >> 8) & 0xff);
ethaddr->ether_addr_octet[2] = ((user0 >> 16) & 0xff);
ethaddr->ether_addr_octet[3] = ((user1 >> 0) & 0xff);
ethaddr->ether_addr_octet[4] = ((user1 >> 8) & 0xff);
ethaddr->ether_addr_octet[5] = ((user1 >> 16) & 0xff);
}
#endif

167
configs/lm3s6965-ek/src/up_leds.c Executable file
View File

@ -0,0 +1,167 @@
/****************************************************************************
* configs/lm3s6965-ek/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "lm3s_internal.h"
#include "lm3s6965ek_internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG with
* CONFIG_DEBUG_VERBOSE too)
*/
#undef LED_DEBUG /* Define to enable debug */
#ifdef LED_DEBUG
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/* Dump GPIO registers */
#ifdef LED_DEBUG
# define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m)
#else
# define led_dumpgpio(m)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
static uint8_t g_nest;
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void up_ledinit(void)
{
leddbg("Initializing\n");
/* Configure Port E, Bit 1 as an output, initial value=OFF */
led_dumpgpio("up_ledinit before lm3s_configgpio()");
lm3s_configgpio(LED_GPIO);
led_dumpgpio("up_ledinit after lm3s_configgpio()");
g_nest = 0;
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
switch (led)
{
case LED_STARTED:
case LED_HEAPALLOCATE:
default:
break;
case LED_INIRQ:
case LED_SIGNAL:
case LED_ASSERTION:
case LED_PANIC:
g_nest++;
case LED_IRQSENABLED:
case LED_STACKCREATED:
led_dumpgpio("up_ledon: before lm3s_gpiowrite()");
lm3s_gpiowrite(LED_GPIO, false);
led_dumpgpio("up_ledon: after lm3s_gpiowrite()");
break;
}
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
switch (led)
{
case LED_IRQSENABLED:
case LED_STACKCREATED:
case LED_STARTED:
case LED_HEAPALLOCATE:
default:
break;
case LED_INIRQ:
case LED_SIGNAL:
case LED_ASSERTION:
case LED_PANIC:
if (--g_nest <= 0)
{
led_dumpgpio("up_ledoff: before lm3s_gpiowrite()");
lm3s_gpiowrite(LED_GPIO, true);
led_dumpgpio("up_ledoff: after lm3s_gpiowrite()");
}
break;
}
}
#endif /* CONFIG_ARCH_LEDS */

159
configs/lm3s6965-ek/src/up_nsh.c Executable file
View File

@ -0,0 +1,159 @@
/****************************************************************************
* config/lm3s6965-ek/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/spi.h>
#include <nuttx/mmcsd.h>
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* PORT and SLOT number probably depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_LM3S6965EK
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
# define CONFIG_EXAMPLES_NSH_HAVEMMCSD 1
# if !defined(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO) || CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO != 0
# error "The LM3S6965 Eval Kit MMC/SD is on SSI0"
# undef CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO
# define CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO 0
# endif
# if !defined(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO) || CONFIG_EXAMPLES_NSH_MMCSDSLOTNO != 0
# error "The LM3S6965 Eval Kit MMC/SD is on SSI0 slot 0"
# undef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
# define CONFIG_EXAMPLES_NSH_MMCSDSLOTNO 0
# endif
#else
/* Add configuration for new LM3s boards here */
# error "Unrecognized lm3s board"
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
#endif
/* Can't support USB features if USB is not enabled */
#ifndef CONFIG_USBDEV
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
#endif
/* Can't support MMC/SD features if mountpoints are disabled */
#if defined(CONFIG_DISABLE_MOUNTPOINT)
# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
#endif
#ifndef CONFIG_EXAMPLES_NSH_MMCSDMINOR
# define CONFIG_EXAMPLES_NSH_MMCSDMINOR 0
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lib_lowprintf(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lib_lowprintf
# else
# define message printf
# endif
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
FAR struct spi_dev_s *spi;
int ret;
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
spi = up_spiinitialize(CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
if (!spi)
{
message("nsh_archinitialize: Failed to initialize SPI port %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO);
/* Bind the SPI port to the slot */
message("nsh_archinitialize: Binding SPI port %d to MMC/SD slot %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
ret = mmcsd_spislotinitialize(CONFIG_EXAMPLES_NSH_MMCSDMINOR, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, spi);
if (ret < 0)
{
message("nsh_archinitialize: Failed to bind SPI port %d to MMC/SD slot %d: %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO, ret);
return ret;
}
message("nsh_archinitialize: Successfuly bound SPI port %d to MMC/SD slot %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO, CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
return OK;
}

153
configs/lm3s6965-ek/src/up_ssi.c Executable file
View File

@ -0,0 +1,153 @@
/************************************************************************************
* configs/lm3s6965-ek/src/up_ssi.c
* arch/arm/src/board/up_ssi.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/spi.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "lm3s_internal.h"
#include "lm3s6965ek_internal.h"
/* The LM3S6965 Eval Kit microSD CS is on SSI0 */
#if !defined(CONFIG_SSI0_DISABLE) /* || !defined(CONFIG_SSI1_DISABLE) */
/************************************************************************************
* Definitions
************************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
#undef SSI_DEBUG /* Define to enable debug */
#undef SSI_VERBOSE /* Define to enable verbose debug */
#ifdef SSI_DEBUG
# define ssidbg lldbg
# ifdef SSI_VERBOSE
# define ssivdbg lldbg
# else
# define ssivdbg(x...)
# endif
#else
# undef SSI_VERBOSE
# define ssidbg(x...)
# define ssivdbg(x...)
#endif
/* Dump GPIO registers */
#ifdef SSI_VERBOSE
# define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m)
#else
# define ssi_dumpgpio(m)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lm3s_ssiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the LM3S6965 Eval Kit.
*
************************************************************************************/
void weak_function lm3s_ssiinitialize(void)
{
/* Configure the SPI-based microSD CS GPIO */
ssi_dumpgpio("lm3s_ssiinitialize() before lm3s_configgpio()");
lm3s_configgpio(SDCCS_GPIO);
ssi_dumpgpio("lm3s_ssiinitialize() after lm3s_configgpio()");
}
/****************************************************************************
* The external functions, lm3s_spiselect and lm3s_spistatus must be provided
* by board-specific logic. The are implementations of the select and status
* methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h).
* All othermethods (including up_spiinitialize()) are provided by common
* logic. To use this common SPI logic on your board:
*
* 1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your
* board-specific logic. This function will perform chip selection and
* status operations using GPIOs in the way your board is configured.
* 2. Add a call to up_spiinitialize() in your low level initialization
* logic
* 3. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
****************************************************************************/
void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
if (devid == SPIDEV_MMCSD)
{
/* Assert the CS pin to the card */
ssi_dumpgpio("lm3s_spiselect() before lm3s_gpiowrite()");
lm3s_gpiowrite(SDCCS_GPIO, !selected);
ssi_dumpgpio("lm3s_spiselect() after lm3s_gpiowrite()");
}
}
uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
#warning "Need to check schematic"
ssidbg("Returning SPI_STATUS_PRESENT\n");
return SPI_STATUS_PRESENT;
}
#endif /* !CONFIG_SSI0_DISABLE || !CONFIG_SSI1_DISABLE */