sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update to README files

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4222 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2011-12-24 13:46:06 +00:00
parent f5486a265a
commit 5561667801
2 changed files with 16 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
configs/pic32-starterkit/README.txt
View File

@ -51,6 +51,7 @@ Contents
MEB Connector
PICtail
Toolchains
Powering the Board
Loading NuttX with PICkit2
Serial Console
PIC32MX Configuration Options
@ -419,6 +420,17 @@ Toolchains
If you have problems with the dependency build (for example, if you are not
building on C:), then you may need to modify tools/mkdeps.sh
Powering the Board
==================
"Power can be supplied to the Multimedia Expansion Board through the DC
connector located on the Multimedia Expansion Board... By connecting
9-14V power supply to the DC connector, the Multimedia Expansion Board
and starter kit will receive the proper voltages. The user can also
supply power via the starter kit. However, if the application uses
multiple features of the Multimedia Expansion Board, it is recommended
to use 9-14V power supply."
Loading NuttX with PICkit2
==========================

9
configs/pic32-starterkit/ostest/defconfig
View File

@ -49,7 +49,9 @@
# CONFIG_ARCH_BOARD_name - for use in C code
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
# NOTE: The PIC32MX is always little endian.
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
# the delay actually is 100 seconds.
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
# CONFIG_DRAM_START - The start address of DRAM (physical)
# CONFIG_DRAM_END - Last address+1 of installed RAM
@ -65,9 +67,6 @@
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
# cause a 100 second delay during boot-up. This 100 second delay
# serves no purpose other than it allows you to calibrate
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
# the delay actually is 100 seconds.
# CONFIG_ARCH_DMA - Support DMA initialization
#
CONFIG_ARCH=mips
@ -177,7 +176,7 @@ CONFIG_PIC32MX_IOPORTG=y
# can be enabled later by software).
#
CONFIG_PIC32MX_DEBUGGER=2
CONFIG_PIC32MX_ICESEL=0
CONFIG_PIC32MX_ICESEL=1
#
# PIC32MX specific serial device driver settings