sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arch: arm: kinetis: fix Mixed Case error

Browse Source 
Fix Mixed Case error to pass CI

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This commit is contained in:
Alin Jerpelea 2021-03-26 11:44:57 +01:00 committed by David Sidrane
parent fafecbf107
commit 575022debc
2 changed files with 15 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
arch/arm/src/kinetis/hardware/kinetis_usbhs.h
View File

@ -774,25 +774,25 @@
#define USBPHY_CTRLN_SFTRST (1 << 31) /* Bit 31: Soft-reset the USBPHY_PWD, USBPHY_TX, USBPHY_RX, and USBPHY_CTRL */
#define USBPHY_CTRLN_CLKGATE (1 << 30) /* Bit 30: Gate UTMI Clocks */
#define USBPHY_CTRLn_UTMI_SUSPENDM (1 << 29) /* Bit 29: Indicats powered-down state */
#define USBPHY_CTRLn_HOST_FORCE_LS_SE0 (1 << 28) /* Bit 28: Forces next FS packet tohave a EOP with low-speed timing */
#define USBPHY_CTRLn_OTG_ID_VALUE (1 << 27) /* Bit 27: Indicates the results of USB_ID pin */
#define USBPHY_CTRLN_UTMI_SUSPENDM (1 << 29) /* Bit 29: Indicats powered-down state */
#define USBPHY_CTRLN_HOST_FORCE_LS_SE0 (1 << 28) /* Bit 28: Forces next FS packet tohave a EOP with low-speed timing */
#define USBPHY_CTRLN_OTG_ID_VALUE (1 << 27) /* Bit 27: Indicates the results of USB_ID pin */
/* Bit 25-26: Reserved */
#define USBPHY_CTRLn_FSDLL_RST_EN (1 << 24) /* Bit 24: Reset of the FSDLL lock detection logic at the end of each TX packet */
#define USBPHY_CTRLN_FSDLL_RST_EN (1 << 24) /* Bit 24: Reset of the FSDLL lock detection logic at the end of each TX packet */
/* Bit 21-23: Reserved */
#define USBPHY_CTRLn_ENAUTOCLR_PHY_PWD (1 << 20) /* Bit 20: Auto-clear the PWD register bits in USBPHY_PWD if wakeup event while suspended */
#define USBPHY_CTRLn_ENAUTOCLR_CLKGATE (1 << 19) /* Bit 19: Auto-clear the CLKGATE bit if wakeup event while suspended */
#define USBPHY_CTRLn_AUTORESUME_EN (1 << 18) /* Bit 18: Auto resume, HW will send Resume to respond to the device remote wakeup */
#define USBPHY_CTRLN_ENAUTOCLR_PHY_PWD (1 << 20) /* Bit 20: Auto-clear the PWD register bits in USBPHY_PWD if wakeup event while suspended */
#define USBPHY_CTRLN_ENAUTOCLR_CLKGATE (1 << 19) /* Bit 19: Auto-clear the CLKGATE bit if wakeup event while suspended */
#define USBPHY_CTRLN_AUTORESUME_EN (1 << 18) /* Bit 18: Auto resume, HW will send Resume to respond to the device remote wakeup */
/* Bit 16-17: Reserved */
#define USBPHY_CTRLN_ENUTMILEVEL3 (1 << 15) /* Bit 15: Enables UTMI+ Level 3 operation for the USB HS PHY */
#define USBPHY_CTRLN_ENUTMILEVEL2 (1 << 14) /* Bit 14: Enables UTMI+ Level 2 operation for the USB HS PHY */
/* Bit 13: Reserved */
#define USBPHY_CTRLn_DEVPLUGIN_IRQ (1 << 12) /* Bit 12: Indicates device is connected */
#define USBPHY_CTRLN_DEVPLUGIN_IRQ (1 << 12) /* Bit 12: Indicates device is connected */
/* Bits 5-11: Reserved */
#define USBPHY_CTRLn_ENDEVPLUGINDET (1 << 4) /* Bit 4: Enables non-standard resistive plugged-in detection */
#define USBPHY_CTRLn_HOSTDISCONDETECT_IRQ (1 << 3) /* Bit 3: Indicates that the device has disconnected in High-Speed mode */
#define USBPHY_CTRLN_ENDEVPLUGINDET (1 << 4) /* Bit 4: Enables non-standard resistive plugged-in detection */
#define USBPHY_CTRLN_HOSTDISCONDETECT_IRQ (1 << 3) /* Bit 3: Indicates that the device has disconnected in High-Speed mode */
/* Bit 2: Reserved */
#define USBPHY_CTRLn_ENHOSTDISCONDETECT (1 << 1) /* Bit 1: For host mode, enables high-speed disconnect detector */
#define USBPHY_CTRLN_ENHOSTDISCONDETECT (1 << 1) /* Bit 1: For host mode, enables high-speed disconnect detector */
/* Bit 0: Reserved */
/* USB PHY Status Register */

8
arch/arm/src/kinetis/kinetis_usbhshost.c
View File

@ -3311,13 +3311,13 @@ static inline void kinetis_portsc_bottomhalf(void)
hport = &rhport->hport.hport;
#ifdef USBPHY_CTRLn_ENHOSTDISCONDETECT
#ifdef USBPHY_CTRLN_ENHOSTDISCONDETECT
/* Highspeed needs special handling */
if (hport->speed == USB_SPEED_HIGH)
{
uint32_t regval = getreg32(KINETIS_USBHSPHY_CTRL);
regval &= ~(USBPHY_CTRLn_ENHOSTDISCONDETECT);
regval &= ~(USBPHY_CTRLN_ENHOSTDISCONDETECT);
putreg32(regval, KINETIS_USBHSPHY_CTRL);
}
#endif
@ -3900,11 +3900,11 @@ static int kinetis_rh_enumerate(FAR struct usbhost_connection_s *conn,
hport->speed = USB_SPEED_HIGH;
#ifdef USBPHY_CTRLn_ENHOSTDISCONDETECT
#ifdef USBPHY_CTRLN_ENHOSTDISCONDETECT
/* Highspeed needs special handling */
regval = getreg32(KINETIS_USBHSPHY_CTRL);
regval |= USBPHY_CTRLn_ENHOSTDISCONDETECT;
regval |= USBPHY_CTRLN_ENHOSTDISCONDETECT;
putreg32(regval, KINETIS_USBHSPHY_CTRL);
#endif
}