Incorporate patch 1897630

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@714 42af7a65-404d-4744-a932-0658087f49c3

configs/README.txt

@@ -156,7 +156,7 @@ defconfig -- This is a configuration file similar to the Linux
 		  by default)
 		CONFIG_DEBUG_LIB - enable C library debug output (disabled
 		  by default)
-		CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+		CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 		  time console output
 		CONFIG_MM_REGIONS - If the architecture includes multiple
 		  regions of memory to allocate from, this specifies the

configs/c5471evm/defconfig

@@ -117,7 +117,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/c5471evm/dhcpconfig

@@ -117,7 +117,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/c5471evm/netconfig

@@ -117,7 +117,7 @@ CONFIG_UART_MODEM_2STOP=0
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/c5471evm/nshconfig

@@ -117,7 +117,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/m68332evb/defconfig

@@ -106,7 +106,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/mcu123-lpc214x/defconfig

@@ -130,7 +130,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/ntosd-dm320/defconfig

@@ -115,7 +115,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/ntosd-dm320/netconfig

@@ -115,7 +115,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/ntosd-dm320/udpconfig

@@ -115,7 +115,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/ntosd-dm320/uipconfig

@@ -115,7 +115,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/pjrc-8051/defconfig

@@ -103,7 +103,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/sim/nettest/defconfig

@@ -71,7 +71,7 @@ CONFIG_HAVE_LIBM=y
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/sim/ostest/defconfig

@@ -60,7 +60,7 @@ CONFIG_ARCH_BOARD_SIM=y
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/sim/pashello/defconfig

@@ -60,7 +60,7 @@ CONFIG_ARCH_BOARD_SIM=y
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/xtrs/nsh/defconfig

@@ -73,13 +73,15 @@ CONFIG_UART_TXBUFSIZE=256
 #
 # CONFIG_LINKER_START_AREA		- Start of START area
 # CONFIG_LINKER_CODE_AREA 		- Start of _CODE area
-#
+# CONFIG_LINKER_ROM_AT_0000		- Disable the initialization code
+#   starting at 0000
 
 CONFIG_RRLOAD_BINARY=n
 CONFIG_HAVE_LIBM=n
 
 CONFIG_LINKER_START_AREA=0x5200
 CONFIG_LINKER_CODE_AREA=0x5300
+CONFIG_LINKER_ROM_AT_0000=y
 
 #
 # General OS setup
@@ -92,7 +94,7 @@ CONFIG_LINKER_CODE_AREA=0x5300
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/xtrs/ostest/defconfig

@@ -73,13 +73,15 @@ CONFIG_UART_TXBUFSIZE=256
 #
 # CONFIG_LINKER_START_AREA		- Start of START area
 # CONFIG_LINKER_CODE_AREA 		- Start of _CODE area
-#
+# CONFIG_LINKER_ROM_AT_0000		- Disable the initialization code
+#   starting at 0000
 
 CONFIG_RRLOAD_BINARY=n
 CONFIG_HAVE_LIBM=n
 
 CONFIG_LINKER_START_AREA=0x5200
 CONFIG_LINKER_CODE_AREA=0x5300
+CONFIG_LINKER_ROM_AT_0000=y
 
 #
 # General OS setup
@@ -92,7 +94,7 @@ CONFIG_LINKER_CODE_AREA=0x5300
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/xtrs/pashello/defconfig

@@ -73,13 +73,15 @@ CONFIG_UART_TXBUFSIZE=256
 #
 # CONFIG_LINKER_START_AREA		- Start of START area
 # CONFIG_LINKER_CODE_AREA 		- Start of _CODE area
-#
+# CONFIG_LINKER_ROM_AT_0000		- Disable the initialization code
+#   starting at 0000
 
 CONFIG_RRLOAD_BINARY=n
 CONFIG_HAVE_LIBM=n
 
 CONFIG_LINKER_START_AREA=0x5200
 CONFIG_LINKER_CODE_AREA=0x5300
+CONFIG_LINKER_ROM_AT_0000=y
 
 #
 # General OS setup
@@ -92,7 +94,7 @@ CONFIG_LINKER_CODE_AREA=0x5300
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/xtrs/src/xtr_serial.c

@@ -211,10 +211,10 @@ static void up_shutdown(struct uart_dev_s *dev)
  * Description:
  *   Configure the UART to operation in interrupt driven mode.  This method is
  *   called when the serial port is opened.  Normally, this is just after the
- *   the setup() method is called, however, the serial console may operate in
+ *   setup() method is called, however, the serial console may operate in a
- *   a non-interrupt driven mode during the boot phase.
+ *   non-interrupt driven mode during the boot phase.
  *
- *   RX and TX interrupts are not enabled when by the attach method (unless the
+ *   RX and TX interrupts are not enabled by the attach method (unless the
  *   hardware supports multiple levels of interrupt enabling).  The RX and TX
  *   interrupts are not enabled until the txint() and rxint() methods are called.
  *
@@ -271,7 +271,7 @@ static int up_ioctl(struct file *filep, int cmd, unsigned long arg)
  * Description:
  *   Called (usually) from the interrupt level to receive one
  *   character from the UART.  Error bits associated with the
- *   receipt are provided in the the return 'status'.
+ *   receipt are provided in the return 'status'.
  *
  ****************************************************************************/
 

configs/z16f2800100zcog/ostest/defconfig

@@ -117,7 +117,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input

configs/z16f2800100zcog/pashello/defconfig

@@ -117,7 +117,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input

configs/z80sim/nsh/defconfig

@@ -85,7 +85,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/z80sim/ostest/defconfig

@@ -85,7 +85,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/z80sim/pashello/defconfig

@@ -85,7 +85,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
 #   or TICKS_PER_MSEC=10.  This setting may be defined to

configs/z80sim/src/z80_serial.c

@@ -173,10 +173,10 @@ static void up_shutdown(struct uart_dev_s *dev)
  * Description:
  *   Configure the UART to operation in interrupt driven mode.  This method is
  *   called when the serial port is opened.  Normally, this is just after the
- *   the setup() method is called, however, the serial console may operate in
+ *   setup() method is called, however, the serial console may operate in a
- *   a non-interrupt driven mode during the boot phase.
+ *   non-interrupt driven mode during the boot phase.
  *
- *   RX and TX interrupts are not enabled when by the attach method (unless the
+ *   RX and TX interrupts are not enabled by the attach method (unless the
  *   hardware supports multiple levels of interrupt enabling).  The RX and TX
  *   interrupts are not enabled until the txint() and rxint() methods are called.
  *
@@ -221,7 +221,7 @@ static int up_ioctl(struct file *filep, int cmd, unsigned long arg)
  * Description:
  *   Called (usually) from the interrupt level to receive one
  *   character from the UART.  Error bits associated with the
- *   receipt are provided in the the return 'status'.
+ *   receipt are provided in the return 'status'.
  *
  ****************************************************************************/
 

configs/z8encore000zco/ostest/defconfig

@@ -117,7 +117,7 @@ CONFIG_HAVE_LIBM=n
 #   regions of memory to allocate from, this specifies the
 #   number of memory regions that the memory manager must
 #   handle and enables the API mm_addregion(start, end);
-# CONFIG_HAVE_LOWPUTC - architecture supports low-level, boot
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input