Update ChangeLog

configs/samv71-xult/README.txt

@@ -11,7 +11,7 @@ Contents
 ========
 
   - Board Features
-  - Open Issues
+  - Status/Open Issues
   - Serial Console
   - SD card
   - Automounter
@@ -57,11 +57,17 @@ See the Atmel website for further information about this board:
 
   - http://www.atmel.com/tools/atsamv71-xult.aspx
 
-Open Issues
-===========
+tatus/Open Issues
+=================
 
-The BASIC nsh configuration is fully function (as desribed below under
-"Configurations").  There are still open issues that need to be resolved:
+I would characterize the general port as very mature and reliable.  However,
+there are a number of issues, caveats, and unfinished drivers as detailed in
+the following paragraphs.
+
+The BASIC nsh configuration is fully function (as described below under
+"Configurations").  There is also a graphics configuratino (mxtxplnd) and
+a configuration for network testing (netnsh).  There are still open issues
+that need to be resolved:
 
   1. HSCMI. CONFIG_MMCSD_MULTIBLOCK_DISABLE=y is set to disable multi-block
      transfers only because I have not yet had a chance to verify this.  The
@@ -127,6 +133,11 @@ The BASIC nsh configuration is fully function (as desribed below under
      correctly but there is no available technical documentation or sample
      code to debug with.
 
+     Current thinking is the the maXTouch chips that I have have not yet
+     been configured.  In the Linux world, you would do this configuration
+     with the mxt-app program.  But this is a bigger problem for us in the
+     embedded world.
+
   7. The full port for audio support is code complete:  WM8904 driver,
      SSC/I2C driver, and CS2100-CP driver.  But this code is untested.  The
      WM8904 interface was taken directly from the SAMA5D4-EK and may well