SAMA5D4-EK: Add board support for the maXTouch
This commit is contained in:
Gregory Nutt
parent
cbe4d3573d
commit
5e98d5d2e8
@ -174,6 +174,18 @@ config SAMA5D4EK_AT25_NXFFS
|
|||||||
|
|
||||||
endchoice # AT25 serial FLASH configuration
|
endchoice # AT25 serial FLASH configuration
|
||||||
|
|
||||||
|
if INPUT_MXT
|
||||||
|
|
||||||
|
config SAMA5D4EK_MXT_I2CFREQUENCY
|
||||||
|
int "maXTouch I2C frequency"
|
||||||
|
default 100000
|
||||||
|
|
||||||
|
config SAMA5D4EK_MXT_DEVMINOR
|
||||||
|
int "/dev/input minor number"
|
||||||
|
default 0
|
||||||
|
|
||||||
|
endif # INPUT_MXT
|
||||||
|
|
||||||
config SAMA5D4EK_CHANNEL
|
config SAMA5D4EK_CHANNEL
|
||||||
int "PWM channel number"
|
int "PWM channel number"
|
||||||
default 0 if SAMA5_PWM_CHAN0
|
default 0 if SAMA5_PWM_CHAN0
|
||||||
|
|||||||
@ -92,6 +92,7 @@ Contents
|
|||||||
- Watchdog Timer
|
- Watchdog Timer
|
||||||
- TRNG and /dev/random
|
- TRNG and /dev/random
|
||||||
- I2S Audio Support
|
- I2S Audio Support
|
||||||
|
- TM7000 LCD/Touchscreen
|
||||||
- SAMA4D4-EK Configuration Options
|
- SAMA4D4-EK Configuration Options
|
||||||
- Configurations
|
- Configurations
|
||||||
- To-Do List
|
- To-Do List
|
||||||
@ -2771,6 +2772,36 @@ I2S Audio Support
|
|||||||
Library Routines
|
Library Routines
|
||||||
CONFIG_SCHED_WORKQUEUE=y : Driver needs work queue support
|
CONFIG_SCHED_WORKQUEUE=y : Driver needs work queue support
|
||||||
|
|
||||||
|
TM7000 LCD/Touchscreen
|
||||||
|
======================
|
||||||
|
|
||||||
|
The TM7000 LCD is available for the SAMA5D4-EK. See documentation
|
||||||
|
available on the Precision Design Associates website:
|
||||||
|
http://www.pdaatl.com/doc/tm7000.pdf
|
||||||
|
|
||||||
|
The TM7000 features an touchscreen controol
|
||||||
|
|
||||||
|
- 7 inch LCD at 800x480 18-bit RGB resolution and white backlight
|
||||||
|
- Projected Capacitive Multi-Touch Controller based on the Atmel
|
||||||
|
MXT768E maXTouch™ IC
|
||||||
|
- 4 Capacitive “Navigation” Keys available via an Atmel AT42QT1070
|
||||||
|
QTouch™ Button Sensor IC
|
||||||
|
- 200 bytes of non-volatile serial EEPROM
|
||||||
|
|
||||||
|
Both the MXT768E and the AT42QT1070 are I2C devices with interrupting
|
||||||
|
PIO pins:
|
||||||
|
|
||||||
|
------------------------ -----------------
|
||||||
|
SAMA5D4-EK TM7000
|
||||||
|
------------------------ -----------------
|
||||||
|
J9 pin 5 LCD_PE24 J4 pin 5 ~CHG_mxt
|
||||||
|
J9 pin 6 LCD_PE25 J4 pin 6 ~CHG_QT
|
||||||
|
J9 pin 7 LCD_TWCK0_PA31 J4 pin 7 SCL_0
|
||||||
|
J9 pin 8 LCD_TWD0_PA30 J4 pin 8 SDA_0
|
||||||
|
------------------------ -----------------
|
||||||
|
|
||||||
|
The schematic indicates the the MXT468E address is 0x4c/0x4d.
|
||||||
|
|
||||||
SAMA4D4-EK Configuration Options
|
SAMA4D4-EK Configuration Options
|
||||||
=================================
|
=================================
|
||||||
|
|
||||||
|
|||||||
@ -96,6 +96,10 @@ ifeq ($(CONFIG_SAMA5_EMACB),y)
|
|||||||
CSRCS += sam_ethernet.c
|
CSRCS += sam_ethernet.c
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_INPUT_MXT),y)
|
||||||
|
CSRCS += sam_maxtouch.c
|
||||||
|
endif
|
||||||
|
|
||||||
ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
||||||
CSRCS += sam_nsh.c
|
CSRCS += sam_nsh.c
|
||||||
endif
|
endif
|
||||||
|
|||||||
315
configs/sama5d4-ek/src/sam_maxtouch.c
Normal file
315
configs/sama5d4-ek/src/sam_maxtouch.c
Normal file
@ -0,0 +1,315 @@
|
|||||||
|
/************************************************************************************
|
||||||
|
* configs/sama5d4-ek/src/sam_maxtouch.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||||
|
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions
|
||||||
|
* are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
* notice, this list of conditions and the following disclaimer in
|
||||||
|
* the documentation and/or other materials provided with the
|
||||||
|
* distribution.
|
||||||
|
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
* used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*
|
||||||
|
************************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <stdbool.h>
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <debug.h>
|
||||||
|
#include <assert.h>
|
||||||
|
#include <errno.h>
|
||||||
|
|
||||||
|
#include <nuttx/spi/spi.h>
|
||||||
|
#include <nuttx/input/touchscreen.h>
|
||||||
|
#include <nuttx/input/mxt.h>
|
||||||
|
|
||||||
|
#include "up_arch.h"
|
||||||
|
#include "sam_pio.h"
|
||||||
|
#include "sam_twi.h"
|
||||||
|
|
||||||
|
#include "sama5d4-ek.h"
|
||||||
|
|
||||||
|
#ifdef HAVE_MAXTOUCH
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-Processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
/* Configuration ************************************************************/
|
||||||
|
|
||||||
|
#ifndef CONFIG_SAMA5D4EK_MXT_I2CFREQUENCY
|
||||||
|
# define CONFIG_SAMA5D4EK_MXT_I2CFREQUENCY 500000
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_SAMA5D4EK_MXT_DEVMINOR
|
||||||
|
# define CONFIG_SAMA5D4EK_MXT_DEVMINOR 0
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* The touchscreen communicates on TWI0 */
|
||||||
|
|
||||||
|
#define MXT_BUSNUM 0
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Types
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
struct sama5d4ek_tscinfo_s
|
||||||
|
{
|
||||||
|
/* Standard maXTouch interface */
|
||||||
|
|
||||||
|
struct mxt_lower_s lower;
|
||||||
|
|
||||||
|
/* Extensions for the sama5d4ek board */
|
||||||
|
|
||||||
|
mxt_handler_t handler;
|
||||||
|
FAR void *arg;
|
||||||
|
};
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Function Prototypes
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* IRQ/GPIO access callbacks. These operations all hidden behind
|
||||||
|
* callbacks to isolate the maXTouch driver from differences in GPIO
|
||||||
|
* interrupt handling by varying boards and MCUs. If possible,
|
||||||
|
* interrupts should be configured on both rising and falling edges
|
||||||
|
* so that contact and loss-of-contact events can be detected.
|
||||||
|
*
|
||||||
|
* attach - Attach the maXTouch interrupt handler to the GPIO interrupt
|
||||||
|
* enable - Enable or disable the GPIO interrupt
|
||||||
|
* clear - Acknowledge/clear any pending GPIO interrupt
|
||||||
|
*/
|
||||||
|
|
||||||
|
static int mxt_attach(FAR const struct mxt_lower_s *lower, mxt_handler_t isr,
|
||||||
|
FAR void *arg);
|
||||||
|
static void mxt_enable(FAR const struct mxt_lower_s *lower, bool enable);
|
||||||
|
static void mxt_clear(FAR const struct mxt_lower_s *lower);
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* A reference to a structure of this type must be passed to the maXTouch
|
||||||
|
* driver. This structure provides information about the configuration
|
||||||
|
* of the maXTouch and provides some board-specific hooks.
|
||||||
|
*
|
||||||
|
* Memory for this structure is provided by the caller. It is not copied
|
||||||
|
* by the driver and is presumed to persist while the driver is active. The
|
||||||
|
* memory must be writable because, under certain circumstances, the driver
|
||||||
|
* may modify certain values.
|
||||||
|
*/
|
||||||
|
|
||||||
|
static struct sama5d4ek_tscinfo_s g_mxtinfo =
|
||||||
|
{
|
||||||
|
.lower =
|
||||||
|
{
|
||||||
|
.frequency = CONFIG_SAMA5D4EK_MXT_I2CFREQUENCY,
|
||||||
|
|
||||||
|
.attach = mxt_attach,
|
||||||
|
.enable = mxt_enable,
|
||||||
|
.clear = mxt_clear,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* IRQ/GPIO access callbacks. These operations all hidden behind
|
||||||
|
* callbacks to isolate the maXTouch driver from differences in GPIO
|
||||||
|
* interrupt handling by varying boards and MCUs. If possible,
|
||||||
|
* interrupts should be configured on both rising and falling edges
|
||||||
|
* so that contact and loss-of-contact events can be detected.
|
||||||
|
*
|
||||||
|
* attach - Attach the maXTouch interrupt handler to the GPIO interrupt
|
||||||
|
* enable - Enable or disable the GPIO interrupt
|
||||||
|
* clear - Acknowledge/clear any pending GPIO interrupt
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static int mxt_attach(FAR const struct mxt_lower_s *lower, mxt_handler_t isr,
|
||||||
|
FAR void *arg)
|
||||||
|
{
|
||||||
|
if (isr)
|
||||||
|
{
|
||||||
|
/* Just save the address of the handler for now. The new handler will
|
||||||
|
* be attached when the interrupt is next enabled.
|
||||||
|
*/
|
||||||
|
|
||||||
|
ivdbg("Attaching %p\n", isr);
|
||||||
|
g_mxtinfo.handler = isr;
|
||||||
|
g_mxtinfo.arg = arg;
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
ivdbg("Detaching %p\n", g_mxtinfo.handler);
|
||||||
|
mxt_enable(lower, false);
|
||||||
|
g_mxtinfo.handler = NULL;
|
||||||
|
g_mxtinfo.arg = NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void mxt_enable(FAR const struct mxt_lower_s *lower, bool enable)
|
||||||
|
{
|
||||||
|
/* Enable or disable interrupts */
|
||||||
|
|
||||||
|
if (enable && g_mxtinfo.handler)
|
||||||
|
{
|
||||||
|
sam_pioirqenable(IRQ_CHG_MXT);
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
sam_pioirqdisable(IRQ_CHG_MXT);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static void mxt_clear(FAR const struct mxt_lower_s *lower)
|
||||||
|
{
|
||||||
|
/* Does nothing */
|
||||||
|
}
|
||||||
|
|
||||||
|
static int mxt_interrupt(int irq, FAR void *context)
|
||||||
|
{
|
||||||
|
/* Just forward the interrupt to the maXTouch driver */
|
||||||
|
|
||||||
|
if (g_mxtinfo.handler)
|
||||||
|
{
|
||||||
|
return g_mxtinfo.handler(&g_mxtinfo.lower, g_mxtinfo.arg);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* We got an interrupt with no handler. This should not
|
||||||
|
* happen.
|
||||||
|
*/
|
||||||
|
|
||||||
|
sam_pioirqdisable(IRQ_CHG_MXT);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: arch_tcinitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Each board that supports a touchscreen device must provide this function.
|
||||||
|
* This function is called by application-specific, setup logic to
|
||||||
|
* configure the touchscreen device. This function will register the driver
|
||||||
|
* as /dev/inputN where N is the minor device number.
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* minor - The input device minor number
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* Zero is returned on success. Otherwise, a negated errno value is
|
||||||
|
* returned to indicate the nature of the failure.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int arch_tcinitialize(int minor)
|
||||||
|
{
|
||||||
|
FAR struct i2c_dev_s *i2c;
|
||||||
|
static bool initialized = false;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
idbg("minor %d\n", minor);
|
||||||
|
DEBUGASSERT(minor == 0);
|
||||||
|
|
||||||
|
/* Have we already initialized? Since we never uninitialize we must prevent
|
||||||
|
* multiple initializations. This is necessary, for example, when the
|
||||||
|
* touchscreen example is used as a built-in application in NSH and can be
|
||||||
|
* called numerous time. It will attempt to initialize each time.
|
||||||
|
*/
|
||||||
|
|
||||||
|
if (!initialized)
|
||||||
|
{
|
||||||
|
/* Configure the maXTouch CHG interrupt pin */
|
||||||
|
|
||||||
|
(void)sam_configpio(PIO_CHG_MXT);
|
||||||
|
|
||||||
|
/* Get an instance of the I2C interface for the touchscreen chip select */
|
||||||
|
|
||||||
|
i2c = up_i2cinitialize(MXT_BUSNUM);
|
||||||
|
if (!i2c)
|
||||||
|
{
|
||||||
|
idbg("Failed to initialize I2C%d\n", MXT_BUSNUM);
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Configure maXTouch CHG interrupts */
|
||||||
|
|
||||||
|
sam_pioirq(IRQ_CHG_MXT);
|
||||||
|
(void)irq_attach(IRQ_CHG_MXT, mxt_interrupt);
|
||||||
|
|
||||||
|
/* Initialize and register the I2C touchscreen device */
|
||||||
|
|
||||||
|
ret = mxt_register(i2c, &g_mxtinfo.lower, CONFIG_SAMA5D4EK_MXT_DEVMINOR);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
idbg("ERROR: Failed to register touchscreen device\n");
|
||||||
|
irq_detach(IRQ_CHG_MXT);
|
||||||
|
/* up_i2cuninitialize(i2c); */
|
||||||
|
return -ENODEV;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Now we are initialized */
|
||||||
|
|
||||||
|
initialized = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: arch_tcuninitialize
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Each board that supports a touchscreen device must provide this function.
|
||||||
|
* This function is called by application-specific, setup logic to
|
||||||
|
* uninitialize the touchscreen device.
|
||||||
|
*
|
||||||
|
* Input Parameters:
|
||||||
|
* None
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* None
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
void arch_tcuninitialize(void)
|
||||||
|
{
|
||||||
|
/* No support for un-initializing the touchscreen maXTouch device. It will
|
||||||
|
* continue to run and process touch interrupts in the background.
|
||||||
|
*/
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif /* HAVE_MAXTOUCH */
|
||||||
@ -63,6 +63,7 @@
|
|||||||
#define HAVE_USBOVCUR 1
|
#define HAVE_USBOVCUR 1
|
||||||
#define HAVE_USBMONITOR 1
|
#define HAVE_USBMONITOR 1
|
||||||
#define HAVE_NETWORK 1
|
#define HAVE_NETWORK 1
|
||||||
|
#define HAVE_MAXTOUCH 1
|
||||||
|
|
||||||
/* HSMCI */
|
/* HSMCI */
|
||||||
/* Can't support MMC/SD if the card interface(s) are not enable */
|
/* Can't support MMC/SD if the card interface(s) are not enable */
|
||||||
@ -296,6 +297,24 @@
|
|||||||
# undef HAVE_NETWORK
|
# undef HAVE_NETWORK
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
/* maXTouch controller */
|
||||||
|
|
||||||
|
#ifndef CONFIG_INPUT_MXT
|
||||||
|
# undef HAVE_MAXTOUCH
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAVE_MAXTOUCH
|
||||||
|
# ifndef CONFIG_SAMA5_TWI0
|
||||||
|
# warning CONFIG_SAMA5_TWI0 is required for touchscreen support
|
||||||
|
# undef HAVE_MAXTOUCH
|
||||||
|
# endif
|
||||||
|
|
||||||
|
# ifndef CONFIG_SAMA5_PIOE_IRQ
|
||||||
|
# warning PIOE interrupts not enabled. No touchsreen support.
|
||||||
|
# undef HAVE_MAXTOUCH
|
||||||
|
# endif
|
||||||
|
#endif
|
||||||
|
|
||||||
/* LEDs *****************************************************************************/
|
/* LEDs *****************************************************************************/
|
||||||
/* There are 3 LEDs on the SAMA5D4-EK:
|
/* There are 3 LEDs on the SAMA5D4-EK:
|
||||||
*
|
*
|
||||||
@ -338,6 +357,43 @@
|
|||||||
PIO_INT_BOTHEDGES | PIO_PORT_PIOE | PIO_PIN13)
|
PIO_INT_BOTHEDGES | PIO_PORT_PIOE | PIO_PIN13)
|
||||||
#define IRQ_BTN_USER SAM_IRQ_PE13
|
#define IRQ_BTN_USER SAM_IRQ_PE13
|
||||||
|
|
||||||
|
/* TM7000 LCD/Touchscreen ***********************************************************/
|
||||||
|
/* The TM7000 LCD is available for the SAMA5D4-EK. See documentation
|
||||||
|
* available on the Precision Design Associates website:
|
||||||
|
* http://www.pdaatl.com/doc/tm7000.pdf
|
||||||
|
*
|
||||||
|
* The TM7000 features an touchscreen controol
|
||||||
|
*
|
||||||
|
* - 7 inch LCD at 800x480 18-bit RGB resolution and white backlight
|
||||||
|
* - Projected Capacitive Multi-Touch Controller based on the Atmel
|
||||||
|
* MXT768E maXTouch™ IC
|
||||||
|
* - 4 Capacitive “Navigation” Keys available via an Atmel AT42QT1070
|
||||||
|
* QTouch™ Button Sensor IC
|
||||||
|
* - 200 bytes of non-volatile serial EEPROM
|
||||||
|
*
|
||||||
|
* Both the MXT768E and the AT42QT1070 are I2C devices with interrupting
|
||||||
|
* PIO pins:
|
||||||
|
*
|
||||||
|
* ------------------------ -----------------
|
||||||
|
* SAMA5D4-EK TM7000
|
||||||
|
* ------------------------ -----------------
|
||||||
|
* J9 pin 5 LCD_PE24 J4 pin 5 ~CHG_mxt
|
||||||
|
* J9 pin 6 LCD_PE25 J4 pin 6 ~CHG_QT
|
||||||
|
* J9 pin 7 LCD_TWCK0_PA31 J4 pin 7 SCL_0
|
||||||
|
* J9 pin 8 LCD_TWD0_PA30 J4 pin 8 SDA_0
|
||||||
|
* ------------------------ -----------------
|
||||||
|
*
|
||||||
|
* The schematic indicates the the MXT468E address is 0x4c/0x4d.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define PIO_CHG_MXT (PIO_INPUT | PIO_CFG_PULLUP | PIO_CFG_DEGLITCH | \
|
||||||
|
PIO_INT_BOTHEDGES | PIO_PORT_PIOE | PIO_PIN24)
|
||||||
|
#define IRQ_CHG_MXT SAM_IRQ_PE24
|
||||||
|
|
||||||
|
#define PIO_CHG_QT (PIO_INPUT | PIO_CFG_PULLUP | PIO_CFG_DEGLITCH | \
|
||||||
|
PIO_INT_BOTHEDGES | PIO_PORT_PIOE | PIO_PIN25)
|
||||||
|
#define IRQ_CHG_QT SAM_IRQ_PE25
|
||||||
|
|
||||||
/* HSMCI Card Slots *****************************************************************/
|
/* HSMCI Card Slots *****************************************************************/
|
||||||
/* The SAMA4D4-EK provides a two SD memory card slots: (1) a full size SD
|
/* The SAMA4D4-EK provides a two SD memory card slots: (1) a full size SD
|
||||||
* card slot (J10), and (2) a microSD memory card slot (J11).
|
* card slot (J10), and (2) a microSD memory card slot (J11).
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user