feat(esp32s3-eye): gpio
This adds the gpio driver and configuration to the esp32-s3-eye board.
This commit is contained in:
Marco Casaroli
Xiang Xiao
parent
f22cff9b0b
commit
5fb2535354
@ -43,4 +43,10 @@
|
|||||||
|
|
||||||
#define BOARD_NLEDS 1
|
#define BOARD_NLEDS 1
|
||||||
|
|
||||||
|
/* GPIO pins used by the GPIO Subsystem */
|
||||||
|
|
||||||
|
#define BOARD_NGPIOOUT 2 /* Amount of GPIO Output pins */
|
||||||
|
#define BOARD_NGPIOIN 0
|
||||||
|
#define BOARD_NGPIOINT 1
|
||||||
|
|
||||||
#endif /* __BOARDS_XTENSA_ESP32S3_ESP32S3_EYE_INCLUDE_BOARD_H */
|
#endif /* __BOARDS_XTENSA_ESP32S3_ESP32S3_EYE_INCLUDE_BOARD_H */
|
||||||
|
|||||||
@ -29,7 +29,10 @@ CSRCS += esp32s3_reset.c
|
|||||||
endif
|
endif
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_DEV_GPIO),y)
|
||||||
|
CSRCS += esp32s3_gpio.c
|
||||||
|
endif
|
||||||
|
|
||||||
DEPPATH += --dep-path board
|
DEPPATH += --dep-path board
|
||||||
VPATH += :board
|
VPATH += :board
|
||||||
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)board$(DELIM)board
|
CFLAGS += ${INCDIR_PREFIX}$(TOPDIR)$(DELIM)arch$(DELIM)$(CONFIG_ARCH)$(DELIM)src$(DELIM)board$(DELIM)board
|
||||||
|
|
||||||
|
|||||||
@ -33,6 +33,12 @@
|
|||||||
* Pre-processor Definitions
|
* Pre-processor Definitions
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
|
/* ESP32-S3-EYE GPIOs *******************************************************/
|
||||||
|
|
||||||
|
/* BOOT Button */
|
||||||
|
|
||||||
|
#define BUTTON_BOOT 0
|
||||||
|
|
||||||
/****************************************************************************
|
/****************************************************************************
|
||||||
* Public Types
|
* Public Types
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
@ -63,5 +69,21 @@
|
|||||||
|
|
||||||
int esp32s3_bringup(void);
|
int esp32s3_bringup(void);
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: esp32s3_gpio_init
|
||||||
|
*
|
||||||
|
* Description:
|
||||||
|
* Configure the GPIO driver.
|
||||||
|
*
|
||||||
|
* Returned Value:
|
||||||
|
* Zero (OK) is returned on success; A negated errno value is returned
|
||||||
|
* to indicate the nature of any failure.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#ifdef CONFIG_DEV_GPIO
|
||||||
|
int esp32s3_gpio_init(void);
|
||||||
|
#endif
|
||||||
|
|
||||||
#endif /* __ASSEMBLY__ */
|
#endif /* __ASSEMBLY__ */
|
||||||
#endif /* __BOARDS_XTENSA_ESP32S3_ESP32S3_EYE_SRC_ESP32S3_EYE_H */
|
#endif /* __BOARDS_XTENSA_ESP32S3_ESP32S3_EYE_SRC_ESP32S3_EYE_H */
|
||||||
|
|||||||
@ -184,6 +184,14 @@ int esp32s3_bringup(void)
|
|||||||
}
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_DEV_GPIO
|
||||||
|
ret = esp32s3_gpio_init();
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
syslog(LOG_ERR, "Failed to initialize GPIO Driver: %d\n", ret);
|
||||||
|
}
|
||||||
#endif
|
#endif
|
||||||
|
|
||||||
/* If we got here then perhaps not all initialization was successful, but
|
/* If we got here then perhaps not all initialization was successful, but
|
||||||
|
|||||||
388
boards/xtensa/esp32s3/esp32s3-eye/src/esp32s3_gpio.c
Normal file
388
boards/xtensa/esp32s3/esp32s3-eye/src/esp32s3_gpio.c
Normal file
@ -0,0 +1,388 @@
|
|||||||
|
/****************************************************************************
|
||||||
|
* boards/xtensa/esp32s3/esp32s3-eye/src/esp32s3_gpio.c
|
||||||
|
*
|
||||||
|
* Licensed to the Apache Software Foundation (ASF) under one or more
|
||||||
|
* contributor license agreements. See the NOTICE file distributed with
|
||||||
|
* this work for additional information regarding copyright ownership. The
|
||||||
|
* ASF licenses this file to you under the Apache License, Version 2.0 (the
|
||||||
|
* "License"); you may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at
|
||||||
|
*
|
||||||
|
* http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
*
|
||||||
|
* Unless required by applicable law or agreed to in writing, software
|
||||||
|
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
|
||||||
|
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
|
||||||
|
* License for the specific language governing permissions and limitations
|
||||||
|
* under the License.
|
||||||
|
*
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Included Files
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#include <nuttx/config.h>
|
||||||
|
|
||||||
|
#include <sys/types.h>
|
||||||
|
#include <nuttx/irq.h>
|
||||||
|
#include <arch/irq.h>
|
||||||
|
#include <assert.h>
|
||||||
|
#include <debug.h>
|
||||||
|
|
||||||
|
#include <nuttx/ioexpander/gpio.h>
|
||||||
|
|
||||||
|
#include <arch/board/board.h>
|
||||||
|
|
||||||
|
#include "esp32s3-eye.h"
|
||||||
|
#include "esp32s3_gpio.h"
|
||||||
|
#include "hardware/esp32s3_gpio_sigmap.h"
|
||||||
|
|
||||||
|
#if defined(CONFIG_DEV_GPIO) && !defined(CONFIG_GPIO_LOWER_HALF)
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Pre-processor Definitions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#if !defined(CONFIG_ESP32S3_GPIO_IRQ) && BOARD_NGPIOINT > 0
|
||||||
|
# error "NGPIOINT is > 0 and GPIO interrupts aren't enabled"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Output pins. GPIO3 is the LED, GPIO48 is the LCD backlight.
|
||||||
|
* used.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_OUT1 3
|
||||||
|
#define GPIO_OUT2 48
|
||||||
|
|
||||||
|
/* Input pins. GPIO0 is the BOOT button.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_IN1 0
|
||||||
|
|
||||||
|
/* Interrupt pins. GPIO0 can be used as an interrupt.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define GPIO_IRQPIN1 0
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Types
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
struct esp32s3gpio_dev_s
|
||||||
|
{
|
||||||
|
struct gpio_dev_s gpio;
|
||||||
|
uint8_t id;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct esp32s3gpint_dev_s
|
||||||
|
{
|
||||||
|
struct esp32s3gpio_dev_s esp32s3gpio;
|
||||||
|
pin_interrupt_t callback;
|
||||||
|
};
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Function Prototypes
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#if BOARD_NGPIOOUT > 0
|
||||||
|
static int gpout_read(struct gpio_dev_s *dev, bool *value);
|
||||||
|
static int gpout_write(struct gpio_dev_s *dev, bool value);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOARD_NGPIOIN > 0
|
||||||
|
static int gpin_read(struct gpio_dev_s *dev, bool *value);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOARD_NGPIOINT > 0
|
||||||
|
static int gpint_read(struct gpio_dev_s *dev, bool *value);
|
||||||
|
static int gpint_attach(struct gpio_dev_s *dev,
|
||||||
|
pin_interrupt_t callback);
|
||||||
|
static int gpint_enable(struct gpio_dev_s *dev, bool enable);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Data
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#if BOARD_NGPIOOUT > 0
|
||||||
|
static const struct gpio_operations_s gpout_ops =
|
||||||
|
{
|
||||||
|
.go_read = gpout_read,
|
||||||
|
.go_write = gpout_write,
|
||||||
|
.go_attach = NULL,
|
||||||
|
.go_enable = NULL,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* This array maps the GPIO pins used as OUTPUT */
|
||||||
|
|
||||||
|
static const uint32_t g_gpiooutputs[BOARD_NGPIOOUT] =
|
||||||
|
{
|
||||||
|
GPIO_OUT1,
|
||||||
|
GPIO_OUT2
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct esp32s3gpio_dev_s g_gpout[BOARD_NGPIOOUT];
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOARD_NGPIOIN > 0
|
||||||
|
static const struct gpio_operations_s gpin_ops =
|
||||||
|
{
|
||||||
|
.go_read = gpin_read,
|
||||||
|
.go_write = NULL,
|
||||||
|
.go_attach = NULL,
|
||||||
|
.go_enable = NULL,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* This array maps the GPIO pins used as INTERRUPT INPUTS */
|
||||||
|
|
||||||
|
static const uint32_t g_gpioinputs[BOARD_NGPIOIN] =
|
||||||
|
{
|
||||||
|
GPIO_IN1
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct esp32s3gpio_dev_s g_gpin[BOARD_NGPIOIN];
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOARD_NGPIOINT > 0
|
||||||
|
static const struct gpio_operations_s gpint_ops =
|
||||||
|
{
|
||||||
|
.go_read = gpint_read,
|
||||||
|
.go_write = NULL,
|
||||||
|
.go_attach = gpint_attach,
|
||||||
|
.go_enable = gpint_enable,
|
||||||
|
};
|
||||||
|
|
||||||
|
/* This array maps the GPIO pins used as INTERRUPT INPUTS */
|
||||||
|
|
||||||
|
static const uint32_t g_gpiointinputs[BOARD_NGPIOINT] =
|
||||||
|
{
|
||||||
|
GPIO_IRQPIN1,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct esp32s3gpint_dev_s g_gpint[BOARD_NGPIOINT];
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Private Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: gpout_read
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#if BOARD_NGPIOOUT > 0
|
||||||
|
static int gpout_read(struct gpio_dev_s *dev, bool *value)
|
||||||
|
{
|
||||||
|
struct esp32s3gpio_dev_s *esp32s3gpio = (struct esp32s3gpio_dev_s *)dev;
|
||||||
|
|
||||||
|
DEBUGASSERT(esp32s3gpio != NULL && value != NULL);
|
||||||
|
DEBUGASSERT(esp32s3gpio->id < BOARD_NGPIOOUT);
|
||||||
|
gpioinfo("Reading...\n");
|
||||||
|
|
||||||
|
*value = esp32s3_gpioread(g_gpiooutputs[esp32s3gpio->id]);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: gpout_write
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static int gpout_write(struct gpio_dev_s *dev, bool value)
|
||||||
|
{
|
||||||
|
struct esp32s3gpio_dev_s *esp32s3gpio = (struct esp32s3gpio_dev_s *)dev;
|
||||||
|
|
||||||
|
DEBUGASSERT(esp32s3gpio != NULL);
|
||||||
|
DEBUGASSERT(esp32s3gpio->id < BOARD_NGPIOOUT);
|
||||||
|
gpioinfo("Writing %d\n", (int)value);
|
||||||
|
|
||||||
|
esp32s3_gpiowrite(g_gpiooutputs[esp32s3gpio->id], value);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: gpin_read
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#if BOARD_NGPIOIN > 0
|
||||||
|
static int gpin_read(struct gpio_dev_s *dev, bool *value)
|
||||||
|
{
|
||||||
|
struct esp32s3gpio_dev_s *esp32s3gpio = (struct esp32s3gpio_dev_s *)dev;
|
||||||
|
|
||||||
|
DEBUGASSERT(esp32s3gpio != NULL && value != NULL);
|
||||||
|
DEBUGASSERT(esp32s3gpio->id < BOARD_NGPIOIN);
|
||||||
|
gpioinfo("Reading... pin %d\n", g_gpioinputs[esp32s3gpio->id]);
|
||||||
|
|
||||||
|
*value = esp32s3_gpioread(g_gpioinputs[esp32s3gpio->id]);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: esp32s3gpio_interrupt
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
#if BOARD_NGPIOINT > 0
|
||||||
|
static int esp32s3gpio_interrupt(int irq, void *context, void *arg)
|
||||||
|
{
|
||||||
|
struct esp32s3gpint_dev_s *esp32s3gpint = (struct esp32s3gpint_dev_s *)arg;
|
||||||
|
|
||||||
|
DEBUGASSERT(esp32s3gpint != NULL && esp32s3gpint->callback != NULL);
|
||||||
|
gpioinfo("Interrupt! callback=%p\n", esp32s3gpint->callback);
|
||||||
|
|
||||||
|
esp32s3gpint->callback(&esp32s3gpint->esp32s3gpio.gpio,
|
||||||
|
esp32s3gpint->esp32s3gpio.id);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: gpint_read
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static int gpint_read(struct gpio_dev_s *dev, bool *value)
|
||||||
|
{
|
||||||
|
struct esp32s3gpint_dev_s *esp32s3gpint = (struct esp32s3gpint_dev_s *)dev;
|
||||||
|
|
||||||
|
DEBUGASSERT(esp32s3gpint != NULL && value != NULL);
|
||||||
|
DEBUGASSERT(esp32s3gpint->esp32s3gpio.id < BOARD_NGPIOINT);
|
||||||
|
gpioinfo("Reading int pin...\n");
|
||||||
|
|
||||||
|
*value = esp32s3_gpioread(g_gpiointinputs[esp32s3gpint->esp32s3gpio.id]);
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: gpint_attach
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static int gpint_attach(struct gpio_dev_s *dev,
|
||||||
|
pin_interrupt_t callback)
|
||||||
|
{
|
||||||
|
struct esp32s3gpint_dev_s *esp32s3gpint =
|
||||||
|
(struct esp32s3gpint_dev_s *)dev;
|
||||||
|
int irq = ESP32S3_PIN2IRQ(g_gpiointinputs[esp32s3gpint->esp32s3gpio.id]);
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
gpioinfo("Attaching the callback\n");
|
||||||
|
|
||||||
|
/* Make sure the interrupt is disabled */
|
||||||
|
|
||||||
|
esp32s3_gpioirqdisable(irq);
|
||||||
|
ret = irq_attach(irq,
|
||||||
|
esp32s3gpio_interrupt,
|
||||||
|
&g_gpint[esp32s3gpint->esp32s3gpio.id]);
|
||||||
|
if (ret < 0)
|
||||||
|
{
|
||||||
|
syslog(LOG_ERR, "ERROR: gpint_attach() failed: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
gpioinfo("Attach %p\n", callback);
|
||||||
|
esp32s3gpint->callback = callback;
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: gpint_enable
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
static int gpint_enable(struct gpio_dev_s *dev, bool enable)
|
||||||
|
{
|
||||||
|
struct esp32s3gpint_dev_s *esp32s3gpint = (struct esp32s3gpint_dev_s *)dev;
|
||||||
|
int irq = ESP32S3_PIN2IRQ(g_gpiointinputs[esp32s3gpint->esp32s3gpio.id]);
|
||||||
|
|
||||||
|
if (enable)
|
||||||
|
{
|
||||||
|
if (esp32s3gpint->callback != NULL)
|
||||||
|
{
|
||||||
|
gpioinfo("Enabling the interrupt\n");
|
||||||
|
|
||||||
|
/* Configure the interrupt for rising edge */
|
||||||
|
|
||||||
|
esp32s3_gpioirqenable(irq, GPIO_INTR_POSEDGE);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
gpioinfo("Disable the interrupt\n");
|
||||||
|
esp32s3_gpioirqdisable(irq);
|
||||||
|
}
|
||||||
|
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Public Functions
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
/****************************************************************************
|
||||||
|
* Name: esp32s3_gpio_init
|
||||||
|
****************************************************************************/
|
||||||
|
|
||||||
|
int esp32s3_gpio_init(void)
|
||||||
|
{
|
||||||
|
int pincount = 0;
|
||||||
|
int i;
|
||||||
|
|
||||||
|
#if BOARD_NGPIOOUT > 0
|
||||||
|
for (i = 0; i < BOARD_NGPIOOUT; i++)
|
||||||
|
{
|
||||||
|
/* Setup and register the GPIO pin */
|
||||||
|
|
||||||
|
g_gpout[i].gpio.gp_pintype = GPIO_OUTPUT_PIN;
|
||||||
|
g_gpout[i].gpio.gp_ops = &gpout_ops;
|
||||||
|
g_gpout[i].id = i;
|
||||||
|
gpio_pin_register(&g_gpout[i].gpio, pincount);
|
||||||
|
|
||||||
|
/* Configure the pins that will be used as output */
|
||||||
|
|
||||||
|
esp32s3_gpio_matrix_out(g_gpiooutputs[i], SIG_GPIO_OUT_IDX, 0, 0);
|
||||||
|
esp32s3_configgpio(g_gpiooutputs[i], OUTPUT_FUNCTION_2 |
|
||||||
|
INPUT_FUNCTION_2);
|
||||||
|
esp32s3_gpiowrite(g_gpiooutputs[i], 0);
|
||||||
|
|
||||||
|
pincount++;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOARD_NGPIOIN > 0
|
||||||
|
for (i = 0; i < BOARD_NGPIOIN; i++)
|
||||||
|
{
|
||||||
|
/* Setup and register the GPIO pin */
|
||||||
|
|
||||||
|
g_gpin[i].gpio.gp_pintype = GPIO_INPUT_PIN;
|
||||||
|
g_gpin[i].gpio.gp_ops = &gpin_ops;
|
||||||
|
g_gpin[i].id = i;
|
||||||
|
gpio_pin_register(&g_gpin[i].gpio, pincount);
|
||||||
|
|
||||||
|
/* Configure the pins that will be used as INPUT */
|
||||||
|
|
||||||
|
esp32s3_configgpio(g_gpioinputs[i], INPUT_FUNCTION_2 | PULLUP);
|
||||||
|
|
||||||
|
pincount++;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if BOARD_NGPIOINT > 0
|
||||||
|
for (i = 0; i < BOARD_NGPIOINT; i++)
|
||||||
|
{
|
||||||
|
/* Setup and register the GPIO pin */
|
||||||
|
|
||||||
|
g_gpint[i].esp32s3gpio.gpio.gp_pintype = GPIO_INTERRUPT_PIN;
|
||||||
|
g_gpint[i].esp32s3gpio.gpio.gp_ops = &gpint_ops;
|
||||||
|
g_gpint[i].esp32s3gpio.id = i;
|
||||||
|
gpio_pin_register(&g_gpint[i].esp32s3gpio.gpio, pincount);
|
||||||
|
|
||||||
|
/* Configure the pins that will be used as interrupt input */
|
||||||
|
|
||||||
|
esp32s3_configgpio(g_gpiointinputs[i], INPUT_FUNCTION_2 | PULLUP);
|
||||||
|
|
||||||
|
pincount++;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return OK;
|
||||||
|
}
|
||||||
|
#endif /* CONFIG_DEV_GPIO && !CONFIG_GPIO_LOWER_HALF */
|
||||||
Loading…
Reference in New Issue
Block a user