Add phy read/write routines
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2635 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
parent
60cb5bd4cf
commit
5fb74fe8f9
@ -201,9 +201,9 @@ static void enc_wdgreg2(FAR struct enc_driver_s *priv, uint8_t cmd,
|
||||
uint8_t wrdata);
|
||||
static void enc_setbank(FAR struct enc_driver_s *priv, uint8_t bank);
|
||||
static uint8_t enc_rdbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg);
|
||||
static uint8_t enc_wrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
|
||||
static void enc_wrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
|
||||
uint8_t wrdata);
|
||||
static uint8_t enc_rdphymac(FAR struct enc_driver_s *priv, uint8_t ctrlreg);
|
||||
static uint8_t enc_rdmreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg);
|
||||
|
||||
/* SPI buffer transfers */
|
||||
|
||||
@ -355,9 +355,12 @@ static uint8_t enc_rdgreg2(FAR struct enc_driver_s *priv, uint8_t cmd)
|
||||
|
||||
enc_select(spi);
|
||||
|
||||
/* Send the read command and (maybe collect the return data) */
|
||||
/* Send the read command and collect the data. The sequence requires
|
||||
* 16-clocks: 8 to clock out the cmd + 8 to clock in the data.
|
||||
*/
|
||||
|
||||
rddata = SPI_SEND(spi, cmd);
|
||||
(void)SPI_SEND(spi, cmd); /* Clock out the command */
|
||||
rddata = SPI_SEND(spi, 0); /* Clock in the data */
|
||||
|
||||
/* De-select ENC28J60 chip */
|
||||
|
||||
@ -386,13 +389,12 @@ static void enc_wdgreg2(FAR struct enc_driver_s *priv, uint8_t cmd,
|
||||
|
||||
enc_select(spi);
|
||||
|
||||
/* Send the write command */
|
||||
/* Send the write command and data. The sequence requires 16-clocks:
|
||||
* 8 to clock out the cmd + 8 to clock out the data.
|
||||
*/
|
||||
|
||||
(void)SPI_SEND(spi, cmd);
|
||||
|
||||
/* Send the data byte */
|
||||
|
||||
(void)SPI_SEND(spi, wrdata);
|
||||
(void)SPI_SEND(spi, cmd); /* Clock out the command */
|
||||
(void)SPI_SEND(spi, wrdata); /* Clock out the data */
|
||||
|
||||
/* De-select ENC28J60 chip. */
|
||||
|
||||
@ -437,7 +439,7 @@ static void enc_setbank(FAR struct enc_driver_s *priv, uint8_t bank)
|
||||
* Function: enc_rdbreg
|
||||
*
|
||||
* Description:
|
||||
* Set the bank for these next control register access.
|
||||
* Read from a banked control register using the RCR command.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
@ -453,13 +455,16 @@ static uint8_t enc_rdbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
|
||||
|
||||
enc_select(spi);
|
||||
|
||||
/* set the bank */
|
||||
/* Set the bank */
|
||||
|
||||
enc_setbank(priv, GETBANK(ctrlreg));
|
||||
|
||||
/* Send the read command and collect the return data. */
|
||||
/* Send the RCR command and collect the data. The sequence requires
|
||||
* 16-clocks: 8 to clock out the cmd + 8 to clock in the data.
|
||||
*/
|
||||
|
||||
rddata = SPI_SEND(spi, ENC_RCR | GETADDR(ctrlreg));
|
||||
(void)SPI_SEND(spi, ENC_RCR | GETADDR(ctrlreg)); /* Clock out the command */
|
||||
rddata = SPI_SEND(spi, 0); /* Clock in the data */
|
||||
|
||||
/* De-select ENC28J60 chip */
|
||||
|
||||
@ -468,7 +473,7 @@ static uint8_t enc_rdbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Function: enc_rdphymac
|
||||
* Function: enc_rdmreg
|
||||
*
|
||||
* Description:
|
||||
* Somewhat different timing is required to read from any PHY or MAC
|
||||
@ -477,7 +482,7 @@ static uint8_t enc_rdbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static uint8_t enc_rdphymac(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
|
||||
static uint8_t enc_rdmreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
|
||||
{
|
||||
FAR struct spi_dev_s *spi;
|
||||
uint8_t rddata;
|
||||
@ -493,13 +498,14 @@ static uint8_t enc_rdphymac(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
|
||||
|
||||
enc_setbank(priv, GETBANK(ctrlreg));
|
||||
|
||||
/* Send the read command (discarding the return data) */
|
||||
/* Send the RCR command and collect the data. The sequence requires
|
||||
* 24-clocks: 8 to clock out the cmd, 8 dummy bits, and 8 to clock in
|
||||
the data.
|
||||
*/
|
||||
|
||||
(void)SPI_SEND(spi, ENC_RCR | GETADDR(ctrlreg));
|
||||
|
||||
/* Do an extra transfer to get the data from the MAC or PHY */
|
||||
|
||||
rddata = SPI_SEND(spi, 0);
|
||||
(void)SPI_SEND(spi, ENC_RCR | GETADDR(ctrlreg)); /* Clock out the command */
|
||||
(void)SPI_SEND(spi,0); /* Clock in the dummy byte */
|
||||
rddata = SPI_SEND(spi, 0); /* Clock in the PHY/MAC data */
|
||||
|
||||
/* De-select ENC28J60 chip */
|
||||
|
||||
@ -508,15 +514,15 @@ static uint8_t enc_rdphymac(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Function: enc_rwrbreg
|
||||
* Function: enc_wrbreg
|
||||
*
|
||||
* Description:
|
||||
* Set the bank for these next control register access.
|
||||
* Write to a banked control register using the WCR command.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static void enc_rwrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
|
||||
uint8_t wrdata)
|
||||
static void enc_wrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
|
||||
uint8_t wrdata)
|
||||
{
|
||||
FAR struct spi_dev_s *spi;
|
||||
|
||||
@ -531,13 +537,12 @@ static void enc_rwrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
|
||||
|
||||
enc_setbank(priv, GETBANK(ctrlreg));
|
||||
|
||||
/* Send the write command */
|
||||
/* Send the WCR command and data. The sequence requires 16-clocks:
|
||||
* 8 to clock out the cmd + 8 to clock out the data.
|
||||
*/
|
||||
|
||||
(void)SPI_SEND(spi, ENC_WCR | GETADDR(ctrlreg));
|
||||
|
||||
/* Send the data byte */
|
||||
|
||||
(void)SPI_SEND(spi, wrdata);
|
||||
(void)SPI_SEND(spi, ENC_WCR | GETADDR(ctrlreg)); /* Clock out the command */
|
||||
(void)SPI_SEND(spi, wrdata); /* Clock out the data */
|
||||
|
||||
/* De-select ENC28J60 chip. */
|
||||
|
||||
@ -610,6 +615,63 @@ static void enc_wrbuffer(FAR struct enc_driver_s *priv,
|
||||
enc_deselect(spi);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Function: enc_rdphy
|
||||
*
|
||||
* Description:
|
||||
* Read 16-bits of PHY data.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static uint16_t enc_rdphy(FAR struct enc_driver_s *priv, uint8_t phyaddr)
|
||||
{
|
||||
uint16_t data;
|
||||
|
||||
/* Set the PHY address (and start the PHY read operation) */
|
||||
|
||||
enc_wrbreg(priv, ENC_MIREGADR, phyaddr);
|
||||
enc_wrbreg(priv, ENC_MICMD, MICMD_MIIRD);
|
||||
|
||||
/* Wait until the PHY read completes */
|
||||
|
||||
while ((enc_rdmreg(priv, ENC_MISTAT) & MISTAT_BUSY) != 0 );
|
||||
|
||||
/* Terminate reading */
|
||||
|
||||
enc_wrbreg(priv, ENC_MICMD, 0x00);
|
||||
|
||||
/* Get data value */
|
||||
|
||||
data = (uint16_t)enc_rdmreg(priv, ENC_MIRDL);
|
||||
data |= (uint16_t)enc_rdmreg(priv, ENC_MIRDH) << 8;
|
||||
return data;
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Function: enc_wrphy
|
||||
*
|
||||
* Description:
|
||||
* write 16-bits of PHY data.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
static void enc_wrphy(FAR struct enc_driver_s *priv, uint8_t phyaddr,
|
||||
uint16_t phydata)
|
||||
{
|
||||
/* Set the PHY register address */
|
||||
|
||||
enc_wrbreg(priv, ENC_MIREGADR, phyaddr);
|
||||
|
||||
/* Write the PHY data */
|
||||
|
||||
enc_wrbreg(priv, ENC_MIWRL, phydata);
|
||||
enc_wrbreg(priv, ENC_MIWRH, phydata >> 8);
|
||||
|
||||
/* Wait until the PHY write completes */
|
||||
|
||||
while ((enc_rdmreg(priv, ENC_MISTAT) & MISTAT_BUSY) != 0);
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Function: enc_transmit
|
||||
*
|
||||
@ -776,7 +838,8 @@ static void enc_txerif(FAR struct enc_driver_s *priv)
|
||||
enc_bfsgreg(priv, ENC_ECON1, ECON1_TXRST);
|
||||
enc_bfcgreg(priv, ENC_ECON1, ECON1_TXRST | ECON1_TXRTS);
|
||||
|
||||
/* Here we really should re-transmit:
|
||||
/* Here we really should re-transmit (I fact, if we want half duplex to
|
||||
* work right, then it is necessary to do this!):
|
||||
*
|
||||
* 1. Read the TSV:
|
||||
* - Read ETXNDL to get the end pointer
|
||||
|
@ -225,12 +225,24 @@
|
||||
#define ENC_EPKTCNT REGADDR(0x19, 1) /* Ethernet Packet Count */
|
||||
/* 0x1a: Reserved */
|
||||
/* 0x1b-0x1f: EIE, EIR, ESTAT, ECON2, ECON1 */
|
||||
|
||||
/* Receive Filter Configuration Bit Definitions */
|
||||
|
||||
#define ERXFCON_BCEN (1 << 0) /* Bit 0: Broadcast Filter Enable */
|
||||
#define ERXFCON_MCEN (1 << 1) /* Bit 1: Multicast Filter Enable */
|
||||
#define ERXFCON_HTEN (1 << 2) /* Bit 2: Hash Table Filter Enable */
|
||||
#define ERXFCON_MPEN (1 << 3) /* Bit 3: Magic Packet Filter Enable */
|
||||
#define ERXFCON_PMEN (1 << 4) /* Bit 4: Pattern Match Filter Enable */
|
||||
#define ERXFCON_CRCEN (1 << 5) /* Bit 5: Post-Filter CRC Check Enable */
|
||||
#define ERXFCON_ANDOR (1 << 6) /* Bit 6: AND/OR Filter Select */
|
||||
#define ERXFCON_UCEN (1 << 7) /* Bit 7: Unicast Filter Enable */
|
||||
|
||||
/* Bank 2 Control Register Addresses */
|
||||
|
||||
#define ENC_MACON1 REGADDR(0x00, 2) /* MAC control 1 */
|
||||
#define ENC_MACON2 REGADDR(0x01, 2) /* MAC control 2 */
|
||||
#define ENC_MACON3 REGADDR(0x02, 2) /* MAC control 3 */
|
||||
#define ENC_MACON4 REGADDR(0x03, 2) /* MAC control 4 */
|
||||
#define ENC_MACON1 REGADDR(0x00, 2) /* MAC Control 1 */
|
||||
/* 0x01: Reserved */
|
||||
#define ENC_MACON3 REGADDR(0x02, 2) /* MAC Control 3 */
|
||||
#define ENC_MACON4 REGADDR(0x03, 2) /* MAC Control 4 */
|
||||
#define ENC_MABBIPG REGADDR(0x04, 2) /* Back-to-Back Inter-Packet Gap (BBIPG<6:0>) */
|
||||
/* 0x05: Reserved */
|
||||
#define ENC_MAIPGL REGADDR(0x06, 2) /* Non-Back-to-Back Inter-Packet Gap Low Byte (MAIPGL<6:0>) */
|
||||
@ -250,6 +262,37 @@
|
||||
#define ENC_MIRDH REGADDR(0x19, 2) /* MII Read Data High Byte(MIRD<15:8>) */
|
||||
/* 0x1a: Reserved */
|
||||
/* 0x1b-0x1f: EIE, EIR, ESTAT, ECON2, ECON1 */
|
||||
|
||||
/* MAC Control 1 Register Bit Definitions */
|
||||
|
||||
#define MACON1_MARXEN (1 << 0) /* Bit 0: MAC Receive Enable */
|
||||
#define MACON1_PASSALL (1 << 1) /* Bit 1: Pass All Received Frames Enable */
|
||||
#define MACON1_RXPAUS (1 << 2) /* Bit 2: Pause Control Frame Reception Enable */
|
||||
#define MACON1_TXPAUS (1 << 3) /* Bit 3: Pause Control Frame Transmission Enable */
|
||||
/* Bits 4-7: Unimplemented or reserved */
|
||||
|
||||
/* MAC Control 1 Register Bit Definitions */
|
||||
|
||||
#define MACON3_FULDPX (1 << 0) /* Bit 0: MAC Full-Duplex Enable */
|
||||
#define MACON3_FRMLNEN (1 << 1) /* Bit 1: Frame Length Checking Enable */
|
||||
#define MACON3_HFRMLEN (1 << 2) /* Bit 2: Huge Frame Enable */
|
||||
#define MACON3_PHDRLEN (1 << 3) /* Bit 3: Proprietary Header Enable */
|
||||
#define MACON3_TXCRCEN (1 << 4) /* Bit 4: Transmit CRC Enable */
|
||||
#define MACON3_PADCFG0 (1 << 5) /* Bit 5: Automatic Pad and CRC Configuration */
|
||||
#define MACON3_PADCFG1 (1 << 6) /* Bit 6: " " " " " " " " " " */
|
||||
#define MACON3_PADCFG2 (1 << 7) /* Bit 7: " " " " " " " " " " */
|
||||
|
||||
/* MAC Control 1 Register Bit Definitions */
|
||||
|
||||
#define MACON4_NOBKOFF (1 << 4) /* Bit 4: No Backoff Enable */
|
||||
#define MACON4_BPEN (1 << 5) /* Bit 5: No Backoff During Backpressure Enable */
|
||||
#define MACON4_DEFER (1 << 6) /* Bit 6: Defer Transmission Enable bit */
|
||||
|
||||
/* MII Command Register Bit Definitions */
|
||||
|
||||
#define MICMD_MIIRD (1 << 0) /* Bit 0: MII Read Enable */
|
||||
#define MICMD_MIISCAN (1 << 1) /* Bit 1: MII Scan Enable */
|
||||
|
||||
/* Bank 3 Control Register Addresses */
|
||||
|
||||
#define ENC_MAADR5 REGADDR(0x00, 3) /* MAC Address Byte 5 (MAADR<15:8>) */
|
||||
@ -274,6 +317,31 @@
|
||||
/* 0x1a: Reserved */
|
||||
/* 0x1b-0x1f: EIE, EIR, ESTAT, ECON2, ECON1 */
|
||||
|
||||
/* Built-in Self-Test Control Register Bit Definitions */
|
||||
|
||||
#define EBSTCON_BISTST (1 << 0) /* Bit 0: Built-in Self-Test Start/Busy */
|
||||
#define EBSTCON_TME (1 << 1) /* Bit 1: Test Mode Enable */
|
||||
#define EBSTCON_TMSEL0 (1 << 2) /* Bit 2: Test Mode Select */
|
||||
#define EBSTCON_TMSEL1 (1 << 3) /* Bit 3: " " " " " " */
|
||||
#define EBSTCON_PSEL (1 << 4) /* Bit 4: Port Select */
|
||||
#define EBSTCON_PSV0 (1 << 5) /* Bit 5: Pattern Shift Value */
|
||||
#define EBSTCON_PSV1 (1 << 6) /* Bit 6: " " " " " */
|
||||
#define EBSTCON_PSV2 (1 << 7) /* Bit 7: " " " " " */
|
||||
|
||||
/* MII Status Register Register Bit Definitions */
|
||||
|
||||
#define MISTAT_BUSY (1 << 0) /* Bit 0: MII Management Busy */
|
||||
#define MISTAT_SCAN (1 << 1) /* Bit 1: MII Management Scan Operation */
|
||||
#define MISTAT_NVALID (1 << 2) /* Bit 2: MII Management Read Data Not Valid */
|
||||
/* Bits 3-7: Reserved or unimplemented */
|
||||
|
||||
/* Ethernet Flow Control Register Bit Definitions */
|
||||
|
||||
#define EFLOCON_FCEN0 (1 << 0) /* Bit 0: Flow Control Enable */
|
||||
#define EFLOCON_FCEN1 (1 << 1) /* Bit 1: " " " " " " */
|
||||
#define EFLOCON_FULDPXS (1 << 2) /* Bit 2: Read-Only MAC Full-Duplex Shadow */
|
||||
/* Bits 3-7: Reserved or unimplemented */
|
||||
|
||||
/* PHY Registers ************************************************************/
|
||||
|
||||
#define ENC_PHCON1 (0x00) /* PHY Control Register 1 */
|
||||
@ -328,6 +396,7 @@
|
||||
|
||||
/* PHLCON Regiser Bit Definitions */
|
||||
|
||||
/* Bit 0: Reserved */
|
||||
#define PHLCON_STRCH (1 << 1) /* Bit 1: LED Pulse Stretching Enable */
|
||||
#define PHLCON_LFRQ0 (1 << 2) /* Bit 2: LED Pulse Stretch Time Configuration */
|
||||
#define PHLCON_LFRQ1 (1 << 3) /* Bit 3: " " " " " " " " " */
|
||||
@ -340,6 +409,13 @@
|
||||
#define PHLCON_LACFG2 (1 << 10) /* Bit 10: " " " " */
|
||||
#define PHLCON_LACFG3 (1 << 11) /* Bit 11: " " " " */
|
||||
|
||||
/* Packet Control Bits Definitions ******************************************/
|
||||
|
||||
#define PKTCTRL_POVERRIDE (1 << 0) /* Bit 0: Per Packet Override */
|
||||
#define PKTCTRL_PCRCEN (1 << 1) /* Bit 1: Per Packet CRC Enable */
|
||||
#define PKTCTRL_PPADEN (1 << 2) /* Bit 2: Per Packet Padding Enable */
|
||||
#define PKTCTRL_PHUGEEN (1 << 3) /* Bit 3: Per Packet Huge Frame Enable */
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
Loading…
Reference in New Issue
Block a user