Add configuration for Wave Share Open1788 (fragmentary)
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5537 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
849cc03ccf
commit
621dfb4a5b
@ -3982,3 +3982,8 @@
|
||||
* configs/olimex-lpc1766stk/nsh: Convert configuration to use
|
||||
the kconfig-frontends tools.
|
||||
* sched/task_reparent.c: Simplify reparenting interface.
|
||||
* arch/arm/src/[many]: More LPC1788 definitions from Rommel
|
||||
Marcelo incorporated.
|
||||
* configs/open1788: Board configuration for the Wave Share
|
||||
Open1788 board. Still fragmentary (contribnuted by Rommel
|
||||
Marcelo, adapted to use kconfig-frontends.
|
||||
|
||||
125
arch/Kconfig
125
arch/Kconfig
@ -103,6 +103,131 @@ source arch/x86/Kconfig
|
||||
source arch/z16/Kconfig
|
||||
source arch/z80/Kconfig
|
||||
|
||||
comment "External Memory Configuration"
|
||||
|
||||
config ARCH_HAVE_EXTNAND
|
||||
bool
|
||||
|
||||
config ARCH_HAVE_EXTNOR
|
||||
bool
|
||||
|
||||
config ARCH_HAVE_EXTDRAM
|
||||
bool
|
||||
|
||||
config ARCH_HAVE_EXTSRAM0
|
||||
bool
|
||||
|
||||
config ARCH_HAVE_EXTSRAM1
|
||||
bool
|
||||
|
||||
config ARCH_EXTNAND
|
||||
bool "Configure external NAND"
|
||||
default n
|
||||
depends on ARCH_HAVE_EXTNAND
|
||||
---help---
|
||||
Configure external NAND memory and, if applicable, map then external
|
||||
NAND into the memory map.
|
||||
|
||||
if ARCH_EXTNAND
|
||||
|
||||
config ARCH_EXTNANDSIZE
|
||||
int "External NAND size"
|
||||
default 0
|
||||
---help---
|
||||
Size of the external NAND in bytes.
|
||||
|
||||
endif
|
||||
|
||||
config ARCH_EXTNOR
|
||||
bool "Configure external NOR memory"
|
||||
default n
|
||||
depends on ARCH_HAVE_EXTNOR
|
||||
---help---
|
||||
Configure external NOR memory and, if applicable, map then external
|
||||
NOR into the memory map.
|
||||
|
||||
if ARCH_EXTNOR
|
||||
|
||||
config ARCH_EXTNORSIZE
|
||||
int "External NOR size"
|
||||
default 0
|
||||
---help---
|
||||
Size of the external NOR in bytes.
|
||||
|
||||
endif
|
||||
|
||||
config ARCH_EXTDRAM
|
||||
bool "Configure external DRAM"
|
||||
default n
|
||||
depends on ARCH_HAVE_EXTDRAM
|
||||
---help---
|
||||
Configure external DRAM memory and, if applicable, map then external
|
||||
DRAM into the memory map.
|
||||
|
||||
if ARCH_EXTDRAM
|
||||
|
||||
config ARCH_EXTDRAMSIZE
|
||||
int "External SDRAM size"
|
||||
default 0
|
||||
---help---
|
||||
Size of the external SDRAM in bytes.
|
||||
|
||||
config ARCH_EXTDRAMHEAP
|
||||
bool "Add external SDRAM to the heap"
|
||||
default y
|
||||
---help---
|
||||
Add the external SDRAM into the heap.
|
||||
|
||||
endif
|
||||
|
||||
config ARCH_EXTSRAM0
|
||||
bool "Configure external SRAM (Bank 0)"
|
||||
default n
|
||||
depends on ARCH_HAVE_EXTSRAM0
|
||||
---help---
|
||||
Configure external SRAM Bank 0 memory and, if applicable, map then
|
||||
external SRAM Bank 0 into the memory map.
|
||||
|
||||
if ARCH_EXTSRAM0
|
||||
|
||||
config ARCH_EXTSRAM0SIZE
|
||||
int "External SRAM size"
|
||||
default 0
|
||||
---help---
|
||||
Size of the external SRAM Bank 0 in bytes.
|
||||
|
||||
config ARCH_EXTSRAM0HEAP
|
||||
bool "Add external SRAM (Bank 0) to the heap"
|
||||
default y
|
||||
---help---
|
||||
Add external SRAM Bank 0 into the heap.
|
||||
|
||||
endif
|
||||
|
||||
config ARCH_EXTSRAM1
|
||||
bool "Configure external SRAM (Bank 1)"
|
||||
default n
|
||||
depends on ARCH_HAVE_EXTSRAM1
|
||||
---help---
|
||||
Configure external SRAM Bank 1 memory and, if applicable, map then
|
||||
external SRAM Bank 1 into the memory map.
|
||||
|
||||
if ARCH_EXTSRAM1
|
||||
|
||||
config ARCH_EXTSRAM1SIZE
|
||||
int "External SRAM1 size"
|
||||
default 0
|
||||
---help---
|
||||
Size of the external SRAM Bank 1 in bytes.
|
||||
|
||||
config ARCH_EXTSRAM1HEAP
|
||||
bool "Add external SRAM (Bank 1) to the heap"
|
||||
default y
|
||||
---help---
|
||||
Add external SRAM Bank 1 into the heap.
|
||||
|
||||
endif
|
||||
|
||||
comment "Architecture Options"
|
||||
|
||||
config ARCH_NOINTC
|
||||
|
||||
@ -104,9 +104,17 @@ config ARCH_FAMILY_LPC176X
|
||||
|
||||
config ARCH_FAMILY_LPC177X
|
||||
bool
|
||||
select ARCH_HAVE_EXTNAND
|
||||
select ARCH_HAVE_EXTSRAM0
|
||||
select ARCH_HAVE_EXTDRAM
|
||||
select ARCH_HAVE_EXTNOR
|
||||
|
||||
config ARCH_FAMILY_LPC178X
|
||||
bool
|
||||
select ARCH_HAVE_EXTNAND
|
||||
select ARCH_HAVE_EXTSRAM0
|
||||
select ARCH_HAVE_EXTDRAM
|
||||
select ARCH_HAVE_EXTNOR
|
||||
|
||||
menu "LPC17xx Peripheral Support"
|
||||
|
||||
|
||||
@ -12,15 +12,31 @@ choice
|
||||
|
||||
config ARCH_CHIP_LPC3130
|
||||
bool "LPC3130"
|
||||
select ARCH_HAVE_EXTNAN
|
||||
select ARCH_HAVE_EXTSRAM0
|
||||
select ARCH_HAVE_EXTSRAM1
|
||||
select ARCH_HAVE_EXTDRAM
|
||||
|
||||
config ARCH_CHIP_LPC3131
|
||||
bool "LPC3131"
|
||||
select ARCH_HAVE_EXTNAND
|
||||
select ARCH_HAVE_EXTSRAM0
|
||||
select ARCH_HAVE_EXTSRAM1
|
||||
select ARCH_HAVE_EXTDRAM
|
||||
|
||||
config ARCH_CHIP_LPC3152
|
||||
bool "LPC3152"
|
||||
select ARCH_HAVE_EXTNAND
|
||||
select ARCH_HAVE_EXTSRAM0
|
||||
select ARCH_HAVE_EXTSRAM1
|
||||
select ARCH_HAVE_EXTDRAM
|
||||
|
||||
config ARCH_CHIP_LPC3154
|
||||
bool "LPC3154"
|
||||
select ARCH_HAVE_EXTNAND
|
||||
select ARCH_HAVE_EXTSRAM0
|
||||
select ARCH_HAVE_EXTSRAM1
|
||||
select ARCH_HAVE_EXTDRAM
|
||||
|
||||
endchoice
|
||||
|
||||
@ -48,79 +64,12 @@ config LPC31_BUILDROOT
|
||||
|
||||
endchoice
|
||||
|
||||
menu "LPC31xx Memory Mapping"
|
||||
|
||||
config LPC31_EXTNAND
|
||||
bool "Map external NAND"
|
||||
default n
|
||||
---help---
|
||||
Map external NAND into the memory map.
|
||||
|
||||
config LPC31_EXTSDRAM
|
||||
bool "Map external SDRAM"
|
||||
default n
|
||||
---help---
|
||||
Map external SDRAM into the memory map.
|
||||
|
||||
config LPC31_EXTSDRAMHEAP
|
||||
bool "Add external SDRAM to the heap"
|
||||
default y
|
||||
depends on LPC31_EXTSDRAM
|
||||
---help---
|
||||
Add external SDRAM into the heap.
|
||||
|
||||
config LPC31_EXTSDRAMSIZE
|
||||
int "External SDRAM size"
|
||||
depends on LPC31_EXTSDRAM
|
||||
---help---
|
||||
Size of the external SDRAM.
|
||||
|
||||
config LPC31_SDRAMHCLK
|
||||
int "External SDRAM HCLK"
|
||||
depends on LPC31_EXTSDRAM
|
||||
depends on ARCH_EXTSDRAM
|
||||
---help---
|
||||
The SDRAM HCLK may be specified here (if not, it will be calculated).
|
||||
|
||||
config LPC31_EXTSRAM0
|
||||
bool "Map external SRAM0"
|
||||
default n
|
||||
---help---
|
||||
Map external SRAM0 into the memory map.
|
||||
|
||||
config LPC31_EXTSRAM0HEAP
|
||||
bool "Add external SRAM0 to the heap"
|
||||
default y
|
||||
depends on LPC31_EXTSRAM0
|
||||
---help---
|
||||
Add external SRAM0 into the heap.
|
||||
|
||||
config LPC31_EXTSRAM0SIZE
|
||||
int "External SRAM size"
|
||||
depends on LPC31_EXTSRAM0
|
||||
---help---
|
||||
Size of the external SRAM.
|
||||
|
||||
config LPC31_EXTSRAM1
|
||||
bool "Map external SRAM0"
|
||||
default n
|
||||
---help---
|
||||
Map external SRAM1 into the memory map.
|
||||
|
||||
config LPC31_EXTSRAM1HEAP
|
||||
bool "Add external SRAM1 to the heap"
|
||||
default y
|
||||
depends on LPC31_EXTSRAM1
|
||||
---help---
|
||||
Add external SRAM1 into the heap.
|
||||
|
||||
config LPC31_EXTSRAM1SIZE
|
||||
int "External SRAM1 size"
|
||||
depends on LPC31_EXTSRAM1
|
||||
---help---
|
||||
Size of the external SRAM1.
|
||||
|
||||
endmenu
|
||||
|
||||
menu "LPC31xx Peripheral Support"
|
||||
|
||||
config LPC31_UART
|
||||
|
||||
@ -67,31 +67,31 @@
|
||||
* memory regions that we have been asked to add to the heap.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_LPC31_EXTSRAM0) && defined(CONFIG_LPC31_EXTSRAM0HEAP)
|
||||
# if defined(CONFIG_LPC31_EXTSRAM1) && defined(CONFIG_LPC31_EXTSRAM1HEAP)
|
||||
# if defined(CONFIG_LPC31_EXTSDRAM) && defined(CONFIG_LPC31_EXTSDRAMHEAP)
|
||||
#if defined(CONFIG_ARCH_EXTSRAM0) && defined(CONFIG_ARCH_EXTSRAM0HEAP)
|
||||
# if defined(CONFIG_ARCH_EXTSRAM1) && defined(CONFIG_ARCH_EXTSRAM1HEAP)
|
||||
# if defined(CONFIG_ARCH_EXTDRAM) && defined(CONFIG_ARCH_EXTDRAMHEAP)
|
||||
# /* SRAM+EXTSRAM0+EXTSRAM1+EXTSDRAM */
|
||||
# define LPC31_NEXT_REGIONS 4
|
||||
# else
|
||||
# /* SRAM+EXTSRAM0+EXTSRAM1 */
|
||||
# define LPC31_NEXT_REGIONS 3
|
||||
# endif
|
||||
# elif defined(CONFIG_LPC31_EXTSDRAM) && defined(CONFIG_LPC31_EXTSDRAMHEAP)
|
||||
# elif defined(CONFIG_ARCH_EXTDRAM) && defined(CONFIG_ARCH_EXTDRAMHEAP)
|
||||
# /* SRAM+EXTSRAM0+EXTSDRAM */
|
||||
# define LPC31_NEXT_REGIONS 3
|
||||
# else
|
||||
# /* SRAM+EXTSRAM0 */
|
||||
# define LPC31_NEXT_REGIONS 2
|
||||
# endif
|
||||
#elif defined(CONFIG_LPC31_EXTSRAM1) && defined(CONFIG_LPC31_EXTSRAM1HEAP)
|
||||
# if defined(CONFIG_LPC31_EXTSDRAM) && defined(CONFIG_LPC31_EXTSDRAMHEAP)
|
||||
#elif defined(CONFIG_ARCH_EXTSRAM1) && defined(CONFIG_ARCH_EXTSRAM1HEAP)
|
||||
# if defined(CONFIG_ARCH_EXTDRAM) && defined(CONFIG_ARCH_EXTDRAMHEAP)
|
||||
# /* SRAM+EXTSRAM1+EXTSDRAM */
|
||||
# define LPC31_NEXT_REGIONS 3
|
||||
# else
|
||||
# /* SRAM+EXTSRAM1 */
|
||||
# define LPC31_NEXT_REGIONS 2
|
||||
# endif
|
||||
#elif defined(CONFIG_LPC31_EXTSDRAM) && defined(CONFIG_LPC31_EXTSDRAMHEAP)
|
||||
#elif defined(CONFIG_ARCH_EXTDRAM) && defined(CONFIG_ARCH_EXTDRAMHEAP)
|
||||
# /* SRAM+EXTSDRAM */
|
||||
# define LPC31_NEXT_REGIONS 2
|
||||
#else
|
||||
@ -105,13 +105,13 @@
|
||||
# else
|
||||
# error "CONFIG_MM_REGIONS is too large for the selected memory regions"
|
||||
# endif
|
||||
# if defined(CONFIG_LPC31_EXTSRAM0) && defined(CONFIG_LPC31_EXTSRAM0HEAP)
|
||||
# if defined(CONFIG_ARCH_EXTSRAM0) && defined(CONFIG_ARCH_EXTSRAM0HEAP)
|
||||
# error "External SRAM0 is selected for heap"
|
||||
# endif
|
||||
# if defined(CONFIG_LPC31_EXTSRAM1) && defined(CONFIG_LPC31_EXTSRAM1HEAP)
|
||||
# if defined(CONFIG_ARCH_EXTSRAM1) && defined(CONFIG_ARCH_EXTSRAM1HEAP)
|
||||
# error "External SRAM1 is selected for heap"
|
||||
# endif
|
||||
# if defined(CONFIG_LPC31_EXTSDRAM) && defined(CONFIG_LPC31_EXTSDRAMHEAP)
|
||||
# if defined(CONFIG_ARCH_EXTDRAM) && defined(CONFIG_ARCH_EXTDRAMHEAP)
|
||||
# error "External SRAM1 is selected for heap"
|
||||
# endif
|
||||
#endif
|
||||
@ -191,16 +191,16 @@ void up_allocate_heap(FAR void **heap_start, size_t *heap_size)
|
||||
#if CONFIG_MM_REGIONS > 1
|
||||
void up_addregion(void)
|
||||
{
|
||||
#if defined(CONFIG_LPC31_EXTSRAM0) && defined(CONFIG_LPC31_EXTSRAM0HEAP)
|
||||
mm_addregion((FAR void*)LPC31_EXTSRAM0_VSECTION, CONFIG_LPC31_EXTSRAM0SIZE);
|
||||
#if defined(CONFIG_ARCH_EXTSRAM0) && defined(CONFIG_ARCH_EXTSRAM0HEAP)
|
||||
mm_addregion((FAR void*)LPC31_EXTSRAM0_VSECTION, CONFIG_ARCH_EXTSRAM0SIZE);
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_LPC31_EXTSRAM1) && defined(CONFIG_LPC31_EXTSRAM1HEAP)
|
||||
mm_addregion((FAR void*)LPC31_EXTSRAM1_VSECTION, CONFIG_LPC31_EXTSRAM1SIZE);
|
||||
#if defined(CONFIG_ARCH_EXTSRAM1) && defined(CONFIG_ARCH_EXTSRAM1HEAP)
|
||||
mm_addregion((FAR void*)LPC31_EXTSRAM1_VSECTION, CONFIG_ARCH_EXTSRAM1SIZE);
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_LPC31_EXTSDRAM) && defined(CONFIG_LPC31_EXTSDRAMHEAP)
|
||||
mm_addregion((FAR void*)LPC31_EXTSDRAM_VSECTION, CONFIG_LPC31_EXTSDRAMSIZE);
|
||||
#if defined(CONFIG_ARCH_EXTDRAM) && defined(CONFIG_ARCH_EXTDRAMHEAP)
|
||||
mm_addregion((FAR void*)LPC31_EXTSDRAM_VSECTION, CONFIG_ARCH_EXTDRAMSIZE);
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
@ -112,17 +112,17 @@ static const struct section_mapping_s section_mapping[] =
|
||||
LPC31_MCI_MMUFLAGS, LPC31_MCI_NSECTIONS},
|
||||
{ LPC31_USBOTG_PSECTION, LPC31_USBOTG_VSECTION,
|
||||
LPC31_USBOTG_MMUFLAGS, LPC31_USBOTG_NSECTIONS},
|
||||
#if defined(CONFIG_LPC31_EXTSRAM0) && CONFIG_LPC31_EXTSRAM0SIZE > 0
|
||||
#if defined(CONFIG_ARCH_EXTSRAM0) && CONFIG_ARCH_EXTSRAM0SIZE > 0
|
||||
{ LPC31_EXTSRAM_PSECTION, LPC31_EXTSRAM_VSECTION,
|
||||
LPC31_EXTSDRAM_MMUFLAGS, LPC31_EXTSRAM_NSECTIONS},
|
||||
#endif
|
||||
#if defined(CONFIG_LPC31_EXTSDRAM) && CONFIG_LPC31_EXTSDRAMSIZE > 0
|
||||
#if defined(CONFIG_ARCH_EXTDRAM) && CONFIG_ARCH_EXTDRAMSIZE > 0
|
||||
{ LPC31_EXTSDRAM0_PSECTION, LPC31_EXTSDRAM0_VSECTION,
|
||||
LPC31_EXTSDRAM_MMUFLAGS, LPC31_EXTSDRAM0_NSECTIONS},
|
||||
#endif
|
||||
{ LPC31_INTC_PSECTION, LPC31_INTC_VSECTION,
|
||||
LPC31_INTC_MMUFLAGS, LPC31_INTC_NSECTIONS},
|
||||
#ifdef CONFIG_LPC31_EXTNAND
|
||||
#ifdef CONFIG_ARCH_EXTNAND
|
||||
{ LPC31_NAND_PSECTION, LPC31_NAND_VSECTION
|
||||
LPC31_NAND_MMUFLAGS, LPC31_NAND_NSECTIONS},
|
||||
#endif
|
||||
|
||||
@ -81,7 +81,7 @@
|
||||
/* 0x60001000-0x6fffffff: Reserved */
|
||||
#define LPC31_NAND_PSECTION 0x70000000 /* 0x70000000-0x700007ff: NANDFLASH Ctrl 2Kb */
|
||||
/* 0x70000800-0xffffffff: Reserved */
|
||||
#ifdef CONFIG_LPC31_EXTNAND /* End of the physical address space */
|
||||
#ifdef CONFIG_ARCH_EXTNAND /* End of the physical address space */
|
||||
# define LPC31_LAST_PSECTION (LPC31_NAND_PSECTION + (1 << 20))
|
||||
#else
|
||||
# define LPC31_LAST_PSECTION (LPC31_INTC_PSECTION + (1 << 20))
|
||||
@ -176,8 +176,8 @@
|
||||
* the size of the SDRAM installed.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_LPC31_EXTSDRAM) && CONFIG_LPC31_EXTSDRAMSIZE > 0
|
||||
# define LPC31_EXTSDRAM0_NSECTIONS _NSECTIONS(CONFIG_LPC31_EXTSDRAMSIZE)
|
||||
#if defined(CONFIG_ARCH_EXTDRAM) && CONFIG_ARCH_EXTDRAMSIZE > 0
|
||||
# define LPC31_EXTSDRAM0_NSECTIONS _NSECTIONS(CONFIG_ARCH_EXTDRAMSIZE)
|
||||
#endif
|
||||
|
||||
/* Section MMU Flags */
|
||||
@ -233,7 +233,7 @@
|
||||
# define LPC31_INTC_VSECTION 0x60000000 /* 0x60000000-0x60000fff: Interrupt controller 4Kb */
|
||||
# define LPC31_NAND_VSECTION 0x70000000 /* 0x70000000-0x700007ff: NANDFLASH Ctrl 2Kb */
|
||||
#
|
||||
# ifdef CONFIG_LPC31_EXTNAND /* End of the virtual address space */
|
||||
# ifdef CONFIG_ARCH_EXTNAND /* End of the virtual address space */
|
||||
# define LPC31_LAST_VSECTION (LPC31_NAND_VSECTION + (1 << 20))
|
||||
# else
|
||||
# define LPC31_LAST_VSECTION (LPC31_INTC_VSECTION + (1 << 20))
|
||||
|
||||
@ -346,6 +346,14 @@ config ARCH_BOARD_OLIMEX_STM32P107
|
||||
Linux or Cygwin. See the http://www.olimex.com for further information. This
|
||||
board features the STMicro STM32F107VC MCU
|
||||
|
||||
config ARCH_BOARD_OPEN1788
|
||||
bool "Wave Share Open1788"
|
||||
depends on ARCH_CHIP_LPC1788
|
||||
---help---
|
||||
This port uses the Wave Share Open1788 board. See the
|
||||
http://wvshare.com/product/Open1788-Standard.htm for further
|
||||
information. This board features the NXP LPC1788 MCU
|
||||
|
||||
config ARCH_BOARD_P112
|
||||
bool "P112 Z180-based platform"
|
||||
depends on ARCH_CHIP_Z8018216FSG
|
||||
@ -682,6 +690,7 @@ config ARCH_BOARD
|
||||
default "olimex-lpc2378" if ARCH_BOARD_OLIMEXLPC2378
|
||||
default "olimex-stm32-p107" if ARCH_BOARD_OLIMEX_STM32P107
|
||||
default "olimex-strp711" if ARCH_BOARD_OLIMEX_STRP711
|
||||
default "open1788" if ARCH_BOARD_OPEN1788
|
||||
default "p112" if ARCH_BOARD_P112
|
||||
default "pcblogic-pic32mx" if ARCH_BOARD_PCBLOGICPIC32MX
|
||||
default "pic32-starterkit" if ARCH_BOARD_PIC32_STARTERKIT
|
||||
@ -869,6 +878,9 @@ endif
|
||||
if ARCH_BOARD_OLIMEX_STRP711
|
||||
source "configs/olimex-strp711/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_OPEN1788
|
||||
source "configs/open1788/Kconfig"
|
||||
endif
|
||||
if ARCH_BOARD_PCBLOGICPIC32MX
|
||||
source "configs/pcblogic-pic32mx/Kconfig"
|
||||
endif
|
||||
|
||||
@ -570,23 +570,23 @@ ARM/EA3131-specific Configuration Options
|
||||
|
||||
External memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
|
||||
CONFIG_LPC31_EXTSRAM0 - Select if external SRAM0 is present
|
||||
CONFIG_LPC31_EXTSRAM0HEAP - Select if external SRAM0 should be
|
||||
CONFIG_ARCH_EXTSRAM0 - Select if external SRAM0 is present
|
||||
CONFIG_ARCH_EXTSRAM0HEAP - Select if external SRAM0 should be
|
||||
configured as part of the NuttX heap.
|
||||
CONFIG_LPC31_EXTSRAM0SIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTSRAM0SIZE - Size (in bytes) of the installed
|
||||
external SRAM0 memory
|
||||
CONFIG_LPC31_EXTSRAM1 - Select if external SRAM1 is present
|
||||
CONFIG_LPC31_EXTSRAM1HEAP - Select if external SRAM1 should be
|
||||
CONFIG_ARCH_EXTSRAM1 - Select if external SRAM1 is present
|
||||
CONFIG_ARCH_EXTSRAM1HEAP - Select if external SRAM1 should be
|
||||
configured as part of the NuttX heap.
|
||||
CONFIG_LPC31_EXTSRAM1SIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTSRAM1SIZE - Size (in bytes) of the installed
|
||||
external SRAM1 memory
|
||||
CONFIG_LPC31_EXTSDRAM - Select if external SDRAM is present
|
||||
CONFIG_LPC31_EXTSDRAMHEAP - Select if external SDRAM should be
|
||||
CONFIG_ARCH_EXTDRAM - Select if external SDRAM is present
|
||||
CONFIG_ARCH_EXTDRAMHEAP - Select if external SDRAM should be
|
||||
configured as part of the NuttX heap.
|
||||
CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTDRAMSIZE - Size (in bytes) of the installed
|
||||
external SDRAM memory
|
||||
CONFIG_LPC31_EXTNAND - Select if external NAND is present
|
||||
CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTNAND - Select if external NAND is present
|
||||
CONFIG_ARCH_EXTNANDSIZE - Size (in bytes) of the installed
|
||||
external NAND memory
|
||||
|
||||
LPC313X specific device driver settings
|
||||
|
||||
@ -79,17 +79,17 @@ CONFIG_LPC31_UART=y
|
||||
#
|
||||
# Exernal memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
#
|
||||
CONFIG_LPC31_EXTSRAM0=n
|
||||
CONFIG_LPC31_EXTSRAM0HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM0SIZE=131072
|
||||
CONFIG_LPC31_EXTSRAM1=n
|
||||
CONFIG_LPC31_EXTSRAM1HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM1SIZE=131072
|
||||
CONFIG_LPC31_EXTSDRAM=n
|
||||
CONFIG_LPC31_EXTSDRAMHEAP=n
|
||||
CONFIG_LPC31_EXTSDRAMSIZE=67108864
|
||||
CONFIG_LPC31_EXTNAND=n
|
||||
CONFIG_LPC31_EXTNANDSIZE=67108864
|
||||
CONFIG_ARCH_EXTSRAM0=n
|
||||
CONFIG_ARCH_EXTSRAM0HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM0SIZE=131072
|
||||
CONFIG_ARCH_EXTSRAM1=n
|
||||
CONFIG_ARCH_EXTSRAM1HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM1SIZE=131072
|
||||
CONFIG_ARCH_EXTDRAM=n
|
||||
CONFIG_ARCH_EXTDRAMHEAP=n
|
||||
CONFIG_ARCH_EXTDRAMSIZE=67108864
|
||||
CONFIG_ARCH_EXTNAND=n
|
||||
CONFIG_ARCH_EXTNANDSIZE=67108864
|
||||
|
||||
#
|
||||
# LPC31XX specific device driver settings
|
||||
|
||||
@ -79,17 +79,17 @@ CONFIG_LPC31_UART=y
|
||||
#
|
||||
# Exernal memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
#
|
||||
CONFIG_LPC31_EXTSRAM0=n
|
||||
CONFIG_LPC31_EXTSRAM0HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM0SIZE=131072
|
||||
CONFIG_LPC31_EXTSRAM1=n
|
||||
CONFIG_LPC31_EXTSRAM1HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM1SIZE=131072
|
||||
CONFIG_LPC31_EXTSDRAM=n
|
||||
CONFIG_LPC31_EXTSDRAMHEAP=n
|
||||
CONFIG_LPC31_EXTSDRAMSIZE=67108864
|
||||
CONFIG_LPC31_EXTNAND=n
|
||||
CONFIG_LPC31_EXTNANDSIZE=67108864
|
||||
CONFIG_ARCH_EXTSRAM0=n
|
||||
CONFIG_ARCH_EXTSRAM0HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM0SIZE=131072
|
||||
CONFIG_ARCH_EXTSRAM1=n
|
||||
CONFIG_ARCH_EXTSRAM1HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM1SIZE=131072
|
||||
CONFIG_ARCH_EXTDRAM=n
|
||||
CONFIG_ARCH_EXTDRAMHEAP=n
|
||||
CONFIG_ARCH_EXTDRAMSIZE=67108864
|
||||
CONFIG_ARCH_EXTNAND=n
|
||||
CONFIG_ARCH_EXTNANDSIZE=67108864
|
||||
|
||||
#
|
||||
# LPC31XX specific device driver settings
|
||||
|
||||
@ -79,17 +79,17 @@ CONFIG_LPC31_UART=y
|
||||
#
|
||||
# Exernal memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
#
|
||||
CONFIG_LPC31_EXTSRAM0=n
|
||||
CONFIG_LPC31_EXTSRAM0HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM0SIZE=131072
|
||||
CONFIG_LPC31_EXTSRAM1=n
|
||||
CONFIG_LPC31_EXTSRAM1HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM1SIZE=131072
|
||||
CONFIG_LPC31_EXTSDRAM=n
|
||||
CONFIG_LPC31_EXTSDRAMHEAP=n
|
||||
CONFIG_LPC31_EXTSDRAMSIZE=67108864
|
||||
CONFIG_LPC31_EXTNAND=n
|
||||
CONFIG_LPC31_EXTNANDSIZE=67108864
|
||||
CONFIG_ARCH_EXTSRAM0=n
|
||||
CONFIG_ARCH_EXTSRAM0HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM0SIZE=131072
|
||||
CONFIG_ARCH_EXTSRAM1=n
|
||||
CONFIG_ARCH_EXTSRAM1HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM1SIZE=131072
|
||||
CONFIG_ARCH_EXTDRAM=n
|
||||
CONFIG_ARCH_EXTDRAMHEAP=n
|
||||
CONFIG_ARCH_EXTDRAMSIZE=67108864
|
||||
CONFIG_ARCH_EXTNAND=n
|
||||
CONFIG_ARCH_EXTNANDSIZE=67108864
|
||||
|
||||
#
|
||||
# LPC31XX specific device driver settings
|
||||
|
||||
@ -44,7 +44,7 @@ CSRCS = up_boot.c up_clkinit.c
|
||||
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
||||
CSRCS += up_buttons.c
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC31_EXTSDRAM),y)
|
||||
ifeq ($(CONFIG_ARCH_EXTDRAM),y)
|
||||
CSRCS += up_mem.c
|
||||
endif
|
||||
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||
|
||||
@ -86,7 +86,7 @@
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_LPC31_EXTSDRAM
|
||||
#ifdef CONFIG_ARCH_EXTDRAM
|
||||
extern void lpc31_meminitialize(void);
|
||||
#endif
|
||||
|
||||
|
||||
@ -75,7 +75,7 @@ void lpc31_boardinitialize(void)
|
||||
{
|
||||
/* Initialize configured, external memory resources */
|
||||
|
||||
#ifdef CONFIG_LPC31_EXTSDRAM
|
||||
#ifdef CONFIG_ARCH_EXTDRAM
|
||||
lpc31_meminitialize();
|
||||
#endif
|
||||
|
||||
|
||||
@ -59,7 +59,7 @@
|
||||
#include "lpc31_mpmc.h"
|
||||
#include "ea3131_internal.h"
|
||||
|
||||
#ifdef CONFIG_LPC31_EXTSDRAM
|
||||
#ifdef CONFIG_ARCH_EXTDRAM
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
@ -356,4 +356,4 @@ void lpc31_meminitialize(void)
|
||||
|
||||
lpc31_sdraminitialize();
|
||||
}
|
||||
#endif /* CONFIG_LPC31_EXTSDRAM */
|
||||
#endif /* CONFIG_ARCH_EXTDRAM */
|
||||
|
||||
@ -79,17 +79,17 @@ CONFIG_LPC31_UART=y
|
||||
#
|
||||
# Exernal memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
#
|
||||
CONFIG_LPC31_EXTSRAM0=n
|
||||
CONFIG_LPC31_EXTSRAM0HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM0SIZE=131072
|
||||
CONFIG_LPC31_EXTSRAM1=n
|
||||
CONFIG_LPC31_EXTSRAM1HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM1SIZE=131072
|
||||
CONFIG_LPC31_EXTSDRAM=n
|
||||
CONFIG_LPC31_EXTSDRAMHEAP=n
|
||||
CONFIG_LPC31_EXTSDRAMSIZE=67108864
|
||||
CONFIG_LPC31_EXTNAND=n
|
||||
CONFIG_LPC31_EXTNANDSIZE=67108864
|
||||
CONFIG_ARCH_EXTSRAM0=n
|
||||
CONFIG_ARCH_EXTSRAM0HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM0SIZE=131072
|
||||
CONFIG_ARCH_EXTSRAM1=n
|
||||
CONFIG_ARCH_EXTSRAM1HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM1SIZE=131072
|
||||
CONFIG_ARCH_EXTDRAM=n
|
||||
CONFIG_ARCH_EXTDRAMHEAP=n
|
||||
CONFIG_ARCH_EXTDRAMSIZE=67108864
|
||||
CONFIG_ARCH_EXTNAND=n
|
||||
CONFIG_ARCH_EXTNANDSIZE=67108864
|
||||
|
||||
#
|
||||
# LPC31XX specific device driver settings
|
||||
|
||||
@ -79,17 +79,17 @@ CONFIG_LPC31_UART=y
|
||||
#
|
||||
# Exernal memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
#
|
||||
CONFIG_LPC31_EXTSRAM0=n
|
||||
CONFIG_LPC31_EXTSRAM0HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM0SIZE=131072
|
||||
CONFIG_LPC31_EXTSRAM1=n
|
||||
CONFIG_LPC31_EXTSRAM1HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM1SIZE=131072
|
||||
CONFIG_LPC31_EXTSDRAM=n
|
||||
CONFIG_LPC31_EXTSDRAMHEAP=n
|
||||
CONFIG_LPC31_EXTSDRAMSIZE=67108864
|
||||
CONFIG_LPC31_EXTNAND=n
|
||||
CONFIG_LPC31_EXTNANDSIZE=67108864
|
||||
CONFIG_ARCH_EXTSRAM0=n
|
||||
CONFIG_ARCH_EXTSRAM0HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM0SIZE=131072
|
||||
CONFIG_ARCH_EXTSRAM1=n
|
||||
CONFIG_ARCH_EXTSRAM1HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM1SIZE=131072
|
||||
CONFIG_ARCH_EXTDRAM=n
|
||||
CONFIG_ARCH_EXTDRAMHEAP=n
|
||||
CONFIG_ARCH_EXTDRAMSIZE=67108864
|
||||
CONFIG_ARCH_EXTNAND=n
|
||||
CONFIG_ARCH_EXTNANDSIZE=67108864
|
||||
|
||||
#
|
||||
# LPC31XX specific device driver settings
|
||||
|
||||
@ -376,23 +376,23 @@ ARM/EA3152-specific Configuration Options
|
||||
|
||||
External memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
|
||||
CONFIG_LPC31_EXTSRAM0 - Select if external SRAM0 is present
|
||||
CONFIG_LPC31_EXTSRAM0HEAP - Select if external SRAM0 should be
|
||||
CONFIG_ARCH_EXTSRAM0 - Select if external SRAM0 is present
|
||||
CONFIG_ARCH_EXTSRAM0HEAP - Select if external SRAM0 should be
|
||||
configured as part of the NuttX heap.
|
||||
CONFIG_LPC31_EXTSRAM0SIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTSRAM0SIZE - Size (in bytes) of the installed
|
||||
external SRAM0 memory
|
||||
CONFIG_LPC31_EXTSRAM1 - Select if external SRAM1 is present
|
||||
CONFIG_LPC31_EXTSRAM1HEAP - Select if external SRAM1 should be
|
||||
CONFIG_ARCH_EXTSRAM1 - Select if external SRAM1 is present
|
||||
CONFIG_ARCH_EXTSRAM1HEAP - Select if external SRAM1 should be
|
||||
configured as part of the NuttX heap.
|
||||
CONFIG_LPC31_EXTSRAM1SIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTSRAM1SIZE - Size (in bytes) of the installed
|
||||
external SRAM1 memory
|
||||
CONFIG_LPC31_EXTSDRAM - Select if external SDRAM is present
|
||||
CONFIG_LPC31_EXTSDRAMHEAP - Select if external SDRAM should be
|
||||
CONFIG_ARCH_EXTDRAM - Select if external SDRAM is present
|
||||
CONFIG_ARCH_EXTDRAMHEAP - Select if external SDRAM should be
|
||||
configured as part of the NuttX heap.
|
||||
CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTDRAMSIZE - Size (in bytes) of the installed
|
||||
external SDRAM memory
|
||||
CONFIG_LPC31_EXTNAND - Select if external NAND is present
|
||||
CONFIG_LPC31_EXTSDRAMSIZE - Size (in bytes) of the installed
|
||||
CONFIG_ARCH_EXTNAND - Select if external NAND is present
|
||||
CONFIG_ARCH_EXTNANDSIZE - Size (in bytes) of the installed
|
||||
external NAND memory
|
||||
|
||||
LPC315X specific device driver settings
|
||||
|
||||
@ -79,17 +79,17 @@ CONFIG_LPC31_UART=y
|
||||
#
|
||||
# Exernal memory available on the board (see also CONFIG_MM_REGIONS)
|
||||
#
|
||||
CONFIG_LPC31_EXTSRAM0=n
|
||||
CONFIG_LPC31_EXTSRAM0HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM0SIZE=131072
|
||||
CONFIG_LPC31_EXTSRAM1=n
|
||||
CONFIG_LPC31_EXTSRAM1HEAP=n
|
||||
CONFIG_LPC31_EXTSRAM1SIZE=131072
|
||||
CONFIG_LPC31_EXTSDRAM=n
|
||||
CONFIG_LPC31_EXTSDRAMHEAP=n
|
||||
CONFIG_LPC31_EXTSDRAMSIZE=67108864
|
||||
CONFIG_LPC31_EXTNAND=n
|
||||
CONFIG_LPC31_EXTNANDSIZE=67108864
|
||||
CONFIG_ARCH_EXTSRAM0=n
|
||||
CONFIG_ARCH_EXTSRAM0HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM0SIZE=131072
|
||||
CONFIG_ARCH_EXTSRAM1=n
|
||||
CONFIG_ARCH_EXTSRAM1HEAP=n
|
||||
CONFIG_ARCH_EXTSRAM1SIZE=131072
|
||||
CONFIG_ARCH_EXTDRAM=n
|
||||
CONFIG_ARCH_EXTDRAMHEAP=n
|
||||
CONFIG_ARCH_EXTDRAMSIZE=67108864
|
||||
CONFIG_ARCH_EXTNAND=n
|
||||
CONFIG_ARCH_EXTNANDSIZE=67108864
|
||||
|
||||
#
|
||||
# LPC31XX specific device driver settings
|
||||
|
||||
@ -44,7 +44,7 @@ CSRCS = up_boot.c up_clkinit.c
|
||||
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
||||
CSRCS += up_buttons.c
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC31_EXTSDRAM),y)
|
||||
ifeq ($(CONFIG_ARCH_EXTDRAM),y)
|
||||
CSRCS += up_mem.c
|
||||
endif
|
||||
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||
|
||||
@ -86,7 +86,7 @@
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_LPC31_EXTSDRAM
|
||||
#ifdef CONFIG_ARCH_EXTDRAM
|
||||
extern void lpc31_meminitialize(void);
|
||||
#endif
|
||||
|
||||
|
||||
@ -75,7 +75,7 @@ void lpc31_boardinitialize(void)
|
||||
{
|
||||
/* Initialize configured, external memory resources */
|
||||
|
||||
#ifdef CONFIG_LPC31_EXTSDRAM
|
||||
#ifdef CONFIG_ARCH_EXTDRAM
|
||||
lpc31_meminitialize();
|
||||
#endif
|
||||
|
||||
|
||||
@ -59,7 +59,7 @@
|
||||
#include "lpc31_mpmc.h"
|
||||
#include "ea3152_internal.h"
|
||||
|
||||
#ifdef CONFIG_LPC31_EXTSDRAM
|
||||
#ifdef CONFIG_ARCH_EXTDRAM
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
@ -356,4 +356,4 @@ void lpc31_meminitialize(void)
|
||||
|
||||
lpc31_sdraminitialize();
|
||||
}
|
||||
#endif /* CONFIG_LPC31_EXTSDRAM */
|
||||
#endif /* CONFIG_ARCH_EXTDRAM */
|
||||
|
||||
7
configs/open1788/Kconfig
Normal file
7
configs/open1788/Kconfig
Normal file
@ -0,0 +1,7 @@
|
||||
#
|
||||
# For a description of the syntax of this configuration file,
|
||||
# see misc/tools/kconfig-language.txt.
|
||||
#
|
||||
|
||||
if ARCH_BOARD_OPEN1788
|
||||
endif
|
||||
38
configs/open1788/README.txt
Normal file
38
configs/open1788/README.txt
Normal file
@ -0,0 +1,38 @@
|
||||
README.txt
|
||||
==========
|
||||
|
||||
This README file discusses the port of NuttX to the WaveShare Open1788 board:
|
||||
See http://wvshare.com/product/Open1788-Standard.htm. This board features the
|
||||
NXP LPC1788 MCU
|
||||
|
||||
CONTENTS
|
||||
========
|
||||
|
||||
o Configuration
|
||||
|
||||
CONFIGURURATION
|
||||
===============
|
||||
|
||||
ostest
|
||||
------
|
||||
This configuration directory, performs a simple OS test using
|
||||
apps/examples/ostest.
|
||||
|
||||
NOTES:
|
||||
|
||||
1. This configuration uses the mconf-based configuration tool. To
|
||||
change this configuration using that tool, you should:
|
||||
|
||||
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||||
and misc/tools/
|
||||
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. Uses the older, OABI, buildroot toolchain. But that is easily
|
||||
reconfigured:
|
||||
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot toolchain
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : Older, OABI toolchain
|
||||
|
||||
|
||||
109
configs/open1788/ostest/Make.defs
Normal file
109
configs/open1788/ostest/Make.defs
Normal file
@ -0,0 +1,109 @@
|
||||
############################################################################
|
||||
# configs/open1788k/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
604
configs/open1788/ostest/defconfig
Normal file
604
configs/open1788/ostest/defconfig
Normal file
@ -0,0 +1,604 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
# CONFIG_RAW_BINARY is not set
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
CONFIG_ARCH_CHIP_LPC17XX=y
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="lpc17xx"
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
CONFIG_BOARD_LOOPSPERMSEC=8079
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
|
||||
|
||||
#
|
||||
# LPC17xx Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_LPC1751 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1752 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1754 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1756 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1758 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1759 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1764 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1765 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1766 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1767 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1768 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1769 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1773 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1774 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1776 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1777 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1778 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1785 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1786 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC1787 is not set
|
||||
CONFIG_ARCH_CHIP_LPC1788=y
|
||||
CONFIG_ARCH_FAMILY_LPC178X=y
|
||||
|
||||
#
|
||||
# LPC17xx Peripheral Support
|
||||
#
|
||||
CONFIG_LPC17_MAINOSC=y
|
||||
CONFIG_LPC17_PLL0=y
|
||||
CONFIG_LPC17_PLL1=y
|
||||
# CONFIG_LPC17_ETHERNET is not set
|
||||
# CONFIG_LPC17_USBHOST is not set
|
||||
# CONFIG_LPC17_USBDEV is not set
|
||||
CONFIG_LPC17_UART0=y
|
||||
# CONFIG_LPC17_UART1 is not set
|
||||
# CONFIG_LPC17_UART2 is not set
|
||||
# CONFIG_LPC17_UART3 is not set
|
||||
# CONFIG_LPC17_CAN1 is not set
|
||||
# CONFIG_LPC17_CAN2 is not set
|
||||
# CONFIG_LPC17_SPI is not set
|
||||
# CONFIG_LPC17_SSP0 is not set
|
||||
# CONFIG_LPC17_SSP1 is not set
|
||||
# CONFIG_LPC17_I2C0 is not set
|
||||
# CONFIG_LPC17_I2C1 is not set
|
||||
# CONFIG_LPC17_I2C2 is not set
|
||||
# CONFIG_LPC17_I2S is not set
|
||||
# CONFIG_LPC17_TMR0 is not set
|
||||
# CONFIG_LPC17_TMR1 is not set
|
||||
# CONFIG_LPC17_TMR2 is not set
|
||||
# CONFIG_LPC17_TMR3 is not set
|
||||
# CONFIG_LPC17_RIT is not set
|
||||
# CONFIG_LPC17_PWM is not set
|
||||
# CONFIG_LPC17_MCPWM is not set
|
||||
# CONFIG_LPC17_QEI is not set
|
||||
# CONFIG_LPC17_RTC is not set
|
||||
# CONFIG_LPC17_WDT is not set
|
||||
# CONFIG_LPC17_ADC is not set
|
||||
# CONFIG_LPC17_DAC is not set
|
||||
# CONFIG_LPC17_GPDMA is not set
|
||||
# CONFIG_LPC17_FLASH is not set
|
||||
|
||||
#
|
||||
# Serial driver options
|
||||
#
|
||||
# CONFIG_SERIAL_TERMIOS is not set
|
||||
# CONFIG_UART0_FLOWCONTROL is not set
|
||||
|
||||
#
|
||||
# ADC driver options
|
||||
#
|
||||
|
||||
#
|
||||
# CAN driver options
|
||||
#
|
||||
# CONFIG_GPIO_IRQ is not set
|
||||
|
||||
#
|
||||
# I2C driver options
|
||||
#
|
||||
|
||||
#
|
||||
# Ethernet driver options
|
||||
#
|
||||
|
||||
#
|
||||
# USB device driver options
|
||||
#
|
||||
|
||||
#
|
||||
# USB host driver options
|
||||
#
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
CONFIG_ARCH_HAVE_EXTNAND=y
|
||||
CONFIG_ARCH_HAVE_EXTNOR=y
|
||||
CONFIG_ARCH_HAVE_EXTDRAM=y
|
||||
CONFIG_ARCH_HAVE_EXTSRAM0=y
|
||||
CONFIG_ARCH_EXTNAND=y
|
||||
CONFIG_ARCH_EXTNANDSIZE=134217728
|
||||
CONFIG_ARCH_EXTNOR=y
|
||||
CONFIG_ARCH_EXTNORSIZE=4194304
|
||||
CONFIG_ARCH_EXTDRAM=y
|
||||
CONFIG_ARCH_EXTDRAMSIZE=67108864
|
||||
CONFIG_ARCH_EXTDRAMHEAP=y
|
||||
CONFIG_ARCH_EXTSRAM0=y
|
||||
CONFIG_ARCH_EXTSRAM0SIZE=131072
|
||||
CONFIG_ARCH_EXTSRAM0HEAP=y
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_DRAM_START=0x10000000
|
||||
CONFIG_DRAM_SIZE=65536
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_OPEN1788=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="open1788"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2013
|
||||
CONFIG_START_MONTH=1
|
||||
CONFIG_START_DAY=15
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_UART0=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_UART0_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# UART0 Configuration
|
||||
#
|
||||
CONFIG_UART0_RXBUFSIZE=256
|
||||
CONFIG_UART0_TXBUFSIZE=256
|
||||
CONFIG_UART0_BAUD=115200
|
||||
CONFIG_UART0_BITS=8
|
||||
CONFIG_UART0_PARITY=0
|
||||
CONFIG_UART0_2STOP=0
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=256
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Helper Functions
|
||||
#
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CDCACM is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_NETTEST is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
CONFIG_EXAMPLES_OSTEST=y
|
||||
# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# ModBus
|
||||
#
|
||||
|
||||
#
|
||||
# FreeModbus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
73
configs/open1788/ostest/setenv.sh
Executable file
73
configs/open1788/ostest/setenv.sh
Executable file
@ -0,0 +1,73 @@
|
||||
#!/bin/bash
|
||||
# configs/open1788/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# The Olimex-lpc1766stk/tools directory
|
||||
export LPCTOOL_DIR="${WD}/configs/olimex-lpc1766stk/tools"
|
||||
|
||||
# Add the path to the toolchain and tools directory to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:${LPCTOOL_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
135
configs/open1788/scripts/ld.script
Executable file
135
configs/open1788/scripts/ld.script
Executable file
@ -0,0 +1,135 @@
|
||||
/****************************************************************************
|
||||
* configs/open1788/scripts/ld.script
|
||||
*
|
||||
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Rommel Marcelo
|
||||
* Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The LPC1788 has 512Kb of FLASH beginning at address 0x0000:0000 and
|
||||
* 96Kb of total SRAM: 64Kb of SRAM in the CPU block beginning at address
|
||||
* 0x10000000 and 32Kb of Peripheral SRAM in two banks, 8Kb at addresses
|
||||
* 0x20000000 bank0 first and 8kb at 0x20020000 at bank0 second. And 16Kb
|
||||
* at 0x20040000 on bank1.
|
||||
* Here we assume that .data and .bss will all fit
|
||||
* into the 64Kb CPU SRAM address range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x00000000, LENGTH = 512K
|
||||
SRAM (rwx) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
PSRAM0 (rwx) : ORIGIN = 0x20000000, LENGTH = 16K /* Peripheral SRAM Bank 0 */
|
||||
PSRAM1 (rwx) : ORIGIN = 0x20040000, LENGTH = 16K /* Peripheral SRAM Bank 1 */
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > FLASH
|
||||
|
||||
.init_section : {
|
||||
_sinit = ABSOLUTE(.);
|
||||
*(.init_array .init_array.*)
|
||||
_einit = ABSOLUTE(.);
|
||||
} > FLASH
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} > FLASH
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} > FLASH
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > SRAM AT > FLASH
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > SRAM
|
||||
|
||||
.psram0 (NOLOAD) :
|
||||
{
|
||||
*(.psram0)
|
||||
. = ALIGN(4)
|
||||
} > PSRAM0
|
||||
|
||||
|
||||
.psram1 (NOLOAD) :
|
||||
{
|
||||
*(.psram0)
|
||||
. = ALIGN(4)
|
||||
} > PSRAM1
|
||||
|
||||
/* Stabs debugging sections */
|
||||
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user