sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Centralize definitions associated with CONFIG_DEBUG_CAN

Browse Source
This commit is contained in:
Gregory Nutt 2016-06-15 15:45:27 -06:00
parent 6d9a0511ad
commit 63b1eb09e6
48 changed files with 301 additions and 654 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
Kconfig
View File

@ -980,7 +980,7 @@ config DEBUG_ANALOG
default n
depends on ANALOG
---help---
Enable analog devic debug features.
Enable analog device debug features.
Enable low level debug features the analog device drivers such as
A/D and D/A converters (disabled by default). Support for this
debug option is architecture-specific and may not be available for
@ -1007,19 +1007,45 @@ config DEBUG_ANALOG_INFO
default n
depends on DEBUG_INFO
---help---
Enable analog device informational output to SYSLOG.
Enable CAN driver informational output to SYSLOG.
endif # DEBUG_ANALOG
config DEBUG_CAN
bool "CAN Debug Output"
bool "CAN Debug Features"
default n
depends on CAN
---help---
Enable CAN driver debug SYSLOG output (disabled by default).
Enable CAN driver debug features.
Support for this debug option is architecture-specific and may not
be available for some MCUs.
if DEBUG_CAN
config DEBUG_CAN_ERROR
bool "CAN Error Output"
default n
depends on DEBUG_ERROR
---help---
Enable CAN driver error output to SYSLOG.
config DEBUG_CAN_WARN
bool "CAN Warnings Output"
default n
depends on DEBUG_WARN
---help---
Enable CAN driver warning output to SYSLOG.
config DEBUG_CAN_INFO
bool "CAN Informational Output"
default n
depends on DEBUG_INFO
---help---
Enable CAN driver informational output to SYSLOG.
endif # DEBUG_CAN
config DEBUG_GPIO
bool "GPIO Debug Features"
default n

4
arch/arm/src/lpc11xx/Kconfig
View File

@ -229,11 +229,11 @@ config CAN_LOOPBACK
config CAN_REGDEBUG
bool "Register level debug"
depends on DEBUG_FEATURES
depends on DEBUG_CAN_INFO
default n
---help---
Output detailed register-level CAN debug information. Requires also
CONFIG_DEBUG_FEATURES and CONFIG_DEBUG_CAN.
CONFIG_DEBUG_CAN_INFO.
endmenu

6
arch/arm/src/lpc17xx/Kconfig
View File

@ -594,13 +594,13 @@ config CAN_LOOPBACK
---help---
Enable CAN loopback mode
config CAN_REGDEBUG
config LPC17_CAN_REGDEBUG
bool "Register level debug"
depends on DEBUG_FEATURES
depends on DEBUG_CAN_INFO
default n
---help---
Output detailed register-level CAN debug information. Requires also
CONFIG_DEBUG_FEATURES and CONFIG_DEBUG_CAN.
CONFIG_DEBUG_CAN_INFO.
endmenu

40
arch/arm/src/lpc17xx/lpc17_can.c
View File

@ -160,25 +160,8 @@
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#if !defined(CONFIG_DEBUG_FEATURES) || !defined(CONFIG_DEBUG_CAN)
# undef CONFIG_CAN_REGDEBUG
#endif
#ifdef CONFIG_DEBUG_CAN
# ifdef CONFIG_CAN_REGDEBUG
# define canerr llerr
# define caninfo llinfo
# else
# define canerr err
# define caninfo info
# endif
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#ifndef CONFIG_DEBUG_CAN_INFO
# undef CONFIG_LPC17_CAN_REGDEBUG
#endif
/* Timing *******************************************************************/
@ -203,14 +186,14 @@ struct up_dev_s
****************************************************************************/
/* CAN Register access */
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_LPC17_CAN_REGDEBUG
static void can_printreg(uint32_t addr, uint32_t value);
#endif
static uint32_t can_getreg(struct up_dev_s *priv, int offset);
static void can_putreg(struct up_dev_s *priv, int offset, uint32_t value);
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_LPC17_CAN_REGDEBUG
static uint32_t can_getcommon(uint32_t addr);
static void can_putcommon(uint32_t addr, uint32_t value);
#else
@ -308,7 +291,7 @@ static struct can_dev_s g_can2dev =
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_LPC17_CAN_REGDEBUG
static void can_printreg(uint32_t addr, uint32_t value)
{
static uint32_t prevaddr = 0;
@ -372,7 +355,7 @@ static void can_printreg(uint32_t addr, uint32_t value)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_LPC17_CAN_REGDEBUG
static uint32_t can_getreg(struct up_dev_s *priv, int offset)
{
uint32_t addr;
@ -408,7 +391,7 @@ static uint32_t can_getreg(struct up_dev_s *priv, int offset)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_LPC17_CAN_REGDEBUG
static void can_putreg(struct up_dev_s *priv, int offset, uint32_t value)
{
uint32_t addr = priv->base + offset;
@ -442,7 +425,7 @@ static void can_putreg(struct up_dev_s *priv, int offset, uint32_t value)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_LPC17_CAN_REGDEBUG
static uint32_t can_getcommon(uint32_t addr)
{
uint32_t value;
@ -470,7 +453,7 @@ static uint32_t can_getcommon(uint32_t addr)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_LPC17_CAN_REGDEBUG
static void can_putcommon(uint32_t addr, uint32_t value)
{
/* Show the register value being written */
@ -553,7 +536,7 @@ static void can_reset(FAR struct can_dev_s *dev)
static int can_setup(FAR struct can_dev_s *dev)
{
#ifdef CONFIG_DEBUG_CAN
#ifdef CONFIG_DEBUG_CAN_INFO
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->cd_priv;
#endif
int ret;
@ -565,6 +548,7 @@ static int can_setup(FAR struct can_dev_s *dev)
{
up_enable_irq(LPC17_IRQ_CAN);
}
return ret;
}
@ -585,7 +569,7 @@ static int can_setup(FAR struct can_dev_s *dev)
static void can_shutdown(FAR struct can_dev_s *dev)
{
#ifdef CONFIG_DEBUG_CAN
#ifdef CONFIG_DEBUG_CAN_INFO
FAR struct up_dev_s *priv = (FAR struct up_dev_s *)dev->cd_priv;
caninfo("CAN%d\n", priv->port);

4
arch/arm/src/sama5/Kconfig
View File

@ -2323,11 +2323,11 @@ config SAMA5_CAN_AUTOBAUD
config SAMA5_CAN_REGDEBUG
bool "CAN Register level debug"
depends on DEBUG_FEATURES
depends on DEBUG_CAN_INFO
default n
---help---
Output detailed register-level CAN device debug information.
Requires also CONFIG_DEBUG_FEATURES.
Requires also CONFIG_DEBUG_CAN_INFO.
endmenu # CAN device driver options
endif # SAMA5_CAN0 || SAMA5_CAN1

17
arch/arm/src/sama5/sam_can.c
View File

@ -123,22 +123,7 @@
#define CAN_DEBUG_INTS (CAN_INT_ERRA | CAN_INT_WARN | CAN_INT_CERR | \
CAN_INT_SERR | CAN_INT_FERR | CAN_INT_BERR)
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
#if !defined(CONFIG_DEBUG_FEATURES) || !defined(CONFIG_DEBUG_CAN)
#ifndef CONFIG_DEBUG_CAN_INFO
# undef CONFIG_SAMA5_CAN_REGDEBUG
#endif

4
arch/arm/src/samv7/Kconfig
View File

@ -2615,11 +2615,11 @@ endmenu # MCAN1 device driver options
config SAMV7_MCAN_REGDEBUG
bool "CAN Register level debug"
depends on DEBUG_FEATURES
depends on DEBUG_CAN_INFO
default n
---help---
Output detailed register-level CAN device debug information.
Requires also CONFIG_DEBUG_FEATURES.
Requires also CONFIG_DEBUG_CAN_INFO.
endmenu # CAN device driver options
endif # SAMV7_MCAN

30
arch/arm/src/samv7/sam_mcan.c
View File

@ -789,28 +789,14 @@
/* Debug ********************************************************************/
/* Debug configurations that may be enabled just for testing MCAN */
#if !defined(CONFIG_DEBUG_FEATURES) || !defined(CONFIG_DEBUG_CAN)
#ifndef CONFIG_DEBUG_CAN_INFO
# undef CONFIG_SAMV7_MCAN_REGDEBUG
#endif
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
# ifdef CONFIG_SAMV7_MCAN_REGDEBUG
# define canregerr llerr
# else
# define canregerr(x...)
# endif
#ifdef CONFIG_SAMV7_MCAN_REGDEBUG
# define reginfo caninfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
# define canregerr(x...)
# define reginfo(x...)
#endif
/****************************************************************************
@ -2756,7 +2742,7 @@ static int mcan_send(FAR struct can_dev_s *dev, FAR struct can_msg_s *msg)
}
txbuffer[0] = regval;
canregerr("T0: %08x\n", regval);
reginfo("T0: %08x\n", regval);
/* Format word T1:
* Data Length Code (DLC) - Value from message structure
@ -2765,7 +2751,7 @@ static int mcan_send(FAR struct can_dev_s *dev, FAR struct can_msg_s *msg)
*/
txbuffer[1] = BUFFER_R1_DLC(msg->cm_hdr.ch_dlc);
canregerr("T1: %08x\n", txbuffer[1]);
reginfo("T1: %08x\n", txbuffer[1]);
/* Followed by the amount of data corresponding to the DLC (T2..) */
@ -3194,7 +3180,7 @@ static void mcan_receive(FAR struct can_dev_s *dev, FAR uint32_t *rxbuffer,
/* Work R0 contains the CAN ID */
regval = *rxbuffer++;
canregerr("R0: %08x\n", regval);
reginfo("R0: %08x\n", regval);
#ifdef CONFIG_CAN_ERRORS
hdr.ch_error = 0;
@ -3240,7 +3226,7 @@ static void mcan_receive(FAR struct can_dev_s *dev, FAR uint32_t *rxbuffer,
/* Word R1 contains the DLC and timestamp */
regval = *rxbuffer++;
canregerr("R1: %08x\n", regval);
reginfo("R1: %08x\n", regval);
hdr.ch_dlc = (regval & BUFFER_R1_DLC_MASK) >> BUFFER_R1_DLC_SHIFT;

15
arch/arm/src/stm32/stm32.h
View File

@ -53,21 +53,6 @@
* Pre-processor Definitions
************************************************************************************/
/* Additional Configuration *********************************************************/
/* Custom debug settings used in the STM32 port. These are managed by STM32-specific
* logic and not the common logic in include/debug.h. NOTE: Some of these also
* depend on CONFIG_DEBUG_INFO
*/
#ifndef CONFIG_DEBUG_FEATURES
# undef CONFIG_DEBUG_DMA
# undef CONFIG_DEBUG_RTC
# undef CONFIG_DEBUG_I2C
# undef CONFIG_DEBUG_CAN
# undef CONFIG_DEBUG_PWM
# undef CONFIG_DEBUG_SENSORS
#endif
/* Peripherals **********************************************************************/
#include "chip.h"

95
arch/arm/src/stm32/stm32_can.c
View File

@ -81,23 +81,8 @@
#define CAN_BIT_QUANTA (CONFIG_CAN_TSEG1 + CONFIG_CAN_TSEG2 + 1)
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
#if !defined(CONFIG_DEBUG_FEATURES) || !defined(CONFIG_DEBUG_CAN)
# undef CONFIG_CAN_REGDEBUG
#ifndef CONFIG_DEBUG_CAN_INFO
# undef CONFIG_STM32_CAN_REGDEBUG
#endif
/****************************************************************************
@ -127,7 +112,7 @@ static void can_putreg(FAR struct stm32_can_s *priv, int offset,
uint32_t value);
static void can_putfreg(FAR struct stm32_can_s *priv, int offset,
uint32_t value);
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpctrlregs(FAR struct stm32_can_s *priv,
FAR const char *msg);
static void can_dumpmbregs(FAR struct stm32_can_s *priv,
@ -249,7 +234,7 @@ static struct can_dev_s g_can2dev =
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static uint32_t can_vgetreg(uint32_t addr)
{
static uint32_t prevaddr = 0;
@ -270,7 +255,7 @@ static uint32_t can_vgetreg(uint32_t addr)
{
if (count == 4)
{
llerr("...\n");
caninfo("...\n");
}
return val;
@ -287,7 +272,7 @@ static uint32_t can_vgetreg(uint32_t addr)
{
/* Yes.. then show how many times the value repeated */
llerr("[repeats %d more times]\n", count-3);
caninfo("[repeats %d more times]\n", count-3);
}
/* Save the new address, value, and count */
@ -299,7 +284,7 @@ static uint32_t can_vgetreg(uint32_t addr)
/* Show the register value read */
llerr("%08x->%08x\n", addr, val);
caninfo("%08x->%08x\n", addr, val);
return val;
}
@ -343,13 +328,13 @@ static uint32_t can_getfreg(FAR struct stm32_can_s *priv, int offset)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_vputreg(uint32_t addr, uint32_t value)
{
/* Show the register value being written */
llerr("%08x<-%08x\n", addr, value);
caninfo("%08x<-%08x\n", addr, value);
/* Write the value */
@ -396,31 +381,31 @@ static void can_putfreg(FAR struct stm32_can_s *priv, int offset,
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpctrlregs(FAR struct stm32_can_s *priv,
FAR const char *msg)
{
if (msg)
{
canllerr("Control Registers: %s\n", msg);
caninfo("Control Registers: %s\n", msg);
}
else
{
canllerr("Control Registers:\n");
caninfo("Control Registers:\n");
}
/* CAN control and status registers */
llerr(" MCR: %08x MSR: %08x TSR: %08x\n",
caninfo(" MCR: %08x MSR: %08x TSR: %08x\n",
getreg32(priv->base + STM32_CAN_MCR_OFFSET),
getreg32(priv->base + STM32_CAN_MSR_OFFSET),
getreg32(priv->base + STM32_CAN_TSR_OFFSET));
llerr(" RF0R: %08x RF1R: %08x\n",
caninfo(" RF0R: %08x RF1R: %08x\n",
getreg32(priv->base + STM32_CAN_RF0R_OFFSET),
getreg32(priv->base + STM32_CAN_RF1R_OFFSET));
llerr(" IER: %08x ESR: %08x BTR: %08x\n",
caninfo(" IER: %08x ESR: %08x BTR: %08x\n",
getreg32(priv->base + STM32_CAN_IER_OFFSET),
getreg32(priv->base + STM32_CAN_ESR_OFFSET),
getreg32(priv->base + STM32_CAN_BTR_OFFSET));
@ -441,46 +426,46 @@ static void can_dumpctrlregs(FAR struct stm32_can_s *priv,
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpmbregs(FAR struct stm32_can_s *priv,
FAR const char *msg)
{
if (msg)
{
canllerr("Mailbox Registers: %s\n", msg);
caninfo("Mailbox Registers: %s\n", msg);
}
else
{
canllerr("Mailbox Registers:\n");
caninfo("Mailbox Registers:\n");
}
/* CAN mailbox registers (3 TX and 2 RX) */
llerr(" TI0R: %08x TDT0R: %08x TDL0R: %08x TDH0R: %08x\n",
caninfo(" TI0R: %08x TDT0R: %08x TDL0R: %08x TDH0R: %08x\n",
getreg32(priv->base + STM32_CAN_TI0R_OFFSET),
getreg32(priv->base + STM32_CAN_TDT0R_OFFSET),
getreg32(priv->base + STM32_CAN_TDL0R_OFFSET),
getreg32(priv->base + STM32_CAN_TDH0R_OFFSET));
llerr(" TI1R: %08x TDT1R: %08x TDL1R: %08x TDH1R: %08x\n",
caninfo(" TI1R: %08x TDT1R: %08x TDL1R: %08x TDH1R: %08x\n",
getreg32(priv->base + STM32_CAN_TI1R_OFFSET),
getreg32(priv->base + STM32_CAN_TDT1R_OFFSET),
getreg32(priv->base + STM32_CAN_TDL1R_OFFSET),
getreg32(priv->base + STM32_CAN_TDH1R_OFFSET));
llerr(" TI2R: %08x TDT2R: %08x TDL2R: %08x TDH2R: %08x\n",
caninfo(" TI2R: %08x TDT2R: %08x TDL2R: %08x TDH2R: %08x\n",
getreg32(priv->base + STM32_CAN_TI2R_OFFSET),
getreg32(priv->base + STM32_CAN_TDT2R_OFFSET),
getreg32(priv->base + STM32_CAN_TDL2R_OFFSET),
getreg32(priv->base + STM32_CAN_TDH2R_OFFSET));
llerr(" RI0R: %08x RDT0R: %08x RDL0R: %08x RDH0R: %08x\n",
caninfo(" RI0R: %08x RDT0R: %08x RDL0R: %08x RDH0R: %08x\n",
getreg32(priv->base + STM32_CAN_RI0R_OFFSET),
getreg32(priv->base + STM32_CAN_RDT0R_OFFSET),
getreg32(priv->base + STM32_CAN_RDL0R_OFFSET),
getreg32(priv->base + STM32_CAN_RDH0R_OFFSET));
llerr(" RI1R: %08x RDT1R: %08x RDL1R: %08x RDH1R: %08x\n",
caninfo(" RI1R: %08x RDT1R: %08x RDL1R: %08x RDH1R: %08x\n",
getreg32(priv->base + STM32_CAN_RI1R_OFFSET),
getreg32(priv->base + STM32_CAN_RDT1R_OFFSET),
getreg32(priv->base + STM32_CAN_RDL1R_OFFSET),
@ -502,7 +487,7 @@ static void can_dumpmbregs(FAR struct stm32_can_s *priv,
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpfiltregs(FAR struct stm32_can_s *priv,
FAR const char *msg)
{
@ -510,14 +495,14 @@ static void can_dumpfiltregs(FAR struct stm32_can_s *priv,
if (msg)
{
canllerr("Filter Registers: %s\n", msg);
caninfo("Filter Registers: %s\n", msg);
}
else
{
canllerr("Filter Registers:\n");
caninfo("Filter Registers:\n");
}
llerr(" FMR: %08x FM1R: %08x FS1R: %08x FFA1R: %08x FA1R: %08x\n",
caninfo(" FMR: %08x FM1R: %08x FS1R: %08x FFA1R: %08x FA1R: %08x\n",
getreg32(priv->base + STM32_CAN_FMR_OFFSET),
getreg32(priv->base + STM32_CAN_FM1R_OFFSET),
getreg32(priv->base + STM32_CAN_FS1R_OFFSET),
@ -526,7 +511,7 @@ static void can_dumpfiltregs(FAR struct stm32_can_s *priv,
for (i = 0; i < CAN_NFILTERS; i++)
{
llerr(" F%dR1: %08x F%dR2: %08x\n",
caninfo(" F%dR1: %08x F%dR2: %08x\n",
i, getreg32(priv->base + STM32_CAN_FIR_OFFSET(i, 1)),
i, getreg32(priv->base + STM32_CAN_FIR_OFFSET(i, 2)));
}
@ -574,7 +559,7 @@ static void can_reset(FAR struct can_dev_s *dev)
else
#endif
{
canllerr("Unsupported port %d\n", priv->port);
canerr("ERROR: Unsupported port %d\n", priv->port);
return;
}
@ -625,7 +610,7 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = can_cellinit(priv);
if (ret < 0)
{
canllerr("CAN%d cell initialization failed: %d\n", priv->port, ret);
canerr("ERROR: CAN%d cell initialization failed: %d\n", priv->port, ret);
return ret;
}
@ -637,7 +622,7 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = can_filterinit(priv);
if (ret < 0)
{
canllerr("CAN%d filter initialization failed: %d\n", priv->port, ret);
canerr("ERROR: CAN%d filter initialization failed: %d\n", priv->port, ret);
return ret;
}
can_dumpfiltregs(priv, "After filter initialization");
@ -649,7 +634,7 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = irq_attach(priv->canrx[0], can_rx0interrupt);
if (ret < 0)
{
canllerr("Failed to attach CAN%d RX0 IRQ (%d)",
canerr(ERROR: "Failed to attach CAN%d RX0 IRQ (%d)",
priv->port, priv->canrx[0]);
return ret;
}
@ -657,7 +642,7 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = irq_attach(priv->canrx[1], can_rx1interrupt);
if (ret < 0)
{
canllerr("Failed to attach CAN%d RX1 IRQ (%d)",
canerr("ERROR: Failed to attach CAN%d RX1 IRQ (%d)",
priv->port, priv->canrx[1]);
return ret;
}
@ -665,7 +650,7 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = irq_attach(priv->cantx, can_txinterrupt);
if (ret < 0)
{
canllerr("Failed to attach CAN%d TX IRQ (%d)",
canerr("ERROR: Failed to attach CAN%d TX IRQ (%d)",
priv->port, priv->cantx);
return ret;
}
@ -878,7 +863,7 @@ static int can_send(FAR struct can_dev_s *dev, FAR struct can_msg_s *msg)
}
else
{
canllerr("ERROR: No available mailbox\n");
canerr("ERROR: No available mailbox\n");
return -EBUSY;
}
@ -1099,7 +1084,7 @@ static int can_rxinterrupt(int irq, FAR void *context, int rxmb)
npending = (regval & CAN_RFR_FMP_MASK) >> CAN_RFR_FMP_SHIFT;
if (npending < 1)
{
canllerr("WARNING: No messages pending\n");
canwarn("WARNING: No messages pending\n");
return OK;
}
@ -1130,7 +1115,7 @@ static int can_rxinterrupt(int irq, FAR void *context, int rxmb)
#else
if ((regval & CAN_RIR_IDE) != 0)
{
canllerr("ERROR: Received message with extended identifier. Dropped\n");
canerr("ERROR: Received message with extended identifier. Dropped\n");
ret = -ENOSYS;
goto errout;
}
@ -1520,7 +1505,7 @@ static int can_cellinit(FAR struct stm32_can_s *priv)
if (timeout < 1)
{
canllerr("ERROR: Timed out waiting to enter initialization mode\n");
canerr("ERROR: Timed out waiting to enter initialization mode\n");
return -ETIMEDOUT;
}
@ -1544,7 +1529,7 @@ static int can_cellinit(FAR struct stm32_can_s *priv)
ret = can_bittiming(priv);
if (ret < 0)
{
canllerr("ERROR: Failed to set bit timing: %d\n", ret);
canerr("ERROR: Failed to set bit timing: %d\n", ret);
return ret;
}
@ -1571,7 +1556,7 @@ static int can_cellinit(FAR struct stm32_can_s *priv)
if (timeout < 1)
{
canllerr("ERROR: Timed out waiting to exit initialization mode: %08x\n",
canerr("ERROR: Timed out waiting to exit initialization mode: %08x\n",
regval);
return -ETIMEDOUT;
}

15
arch/arm/src/stm32l4/stm32l4.h
View File

@ -53,21 +53,6 @@
* Pre-processor Definitions
************************************************************************************/
/* Additional Configuration *********************************************************/
/* Custom debug settings used in the STM32L4 port. These are managed by
* STM32L4-specific logic and not the common logic in include/debug.h.
* NOTE: Some of these also depend on CONFIG_DEBUG_INFO
*/
#ifndef CONFIG_DEBUG_FEATURES
# undef CONFIG_DEBUG_DMA
# undef CONFIG_DEBUG_RTC
# undef CONFIG_DEBUG_I2C
# undef CONFIG_DEBUG_CAN
# undef CONFIG_DEBUG_PWM
# undef CONFIG_DEBUG_SENSORS
#endif
/* Peripherals **********************************************************************/
#include "chip.h"

93
arch/arm/src/stm32l4/stm32l4_can.c
View File

@ -82,23 +82,8 @@
#define CAN_BIT_QUANTA (CONFIG_CAN_TSEG1 + CONFIG_CAN_TSEG2 + 1)
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
#if !defined(CONFIG_DEBUG_FEATURES) || !defined(CONFIG_DEBUG_CAN)
# undef CONFIG_CAN_REGDEBUG
#ifndef CONFIG_DEBUG_CAN_INFO
# undef CONFIG_STM32_CAN_REGDEBUG
#endif
/****************************************************************************
@ -126,7 +111,7 @@ static uint32_t can_getreg(struct stm32l4_can_s *priv, int offset);
static uint32_t can_getfreg(struct stm32l4_can_s *priv, int offset);
static void can_putreg(struct stm32l4_can_s *priv, int offset, uint32_t value);
static void can_putfreg(struct stm32l4_can_s *priv, int offset, uint32_t value);
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpctrlregs(struct stm32l4_can_s *priv, FAR const char *msg);
static void can_dumpmbregs(struct stm32l4_can_s *priv, FAR const char *msg);
static void can_dumpfiltregs(struct stm32l4_can_s *priv, FAR const char *msg);
@ -216,7 +201,7 @@ static struct can_dev_s g_can1dev =
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static uint32_t can_vgetreg(uint32_t addr)
{
static uint32_t prevaddr = 0;
@ -237,7 +222,7 @@ static uint32_t can_vgetreg(uint32_t addr)
{
if (count == 4)
{
llerr("...\n");
caninfo("...\n");
}
return val;
@ -254,7 +239,7 @@ static uint32_t can_vgetreg(uint32_t addr)
{
/* Yes.. then show how many times the value repeated */
llerr("[repeats %d more times]\n", count-3);
caninfo("[repeats %d more times]\n", count-3);
}
/* Save the new address, value, and count */
@ -266,7 +251,7 @@ static uint32_t can_vgetreg(uint32_t addr)
/* Show the register value read */
llerr("%08x->%08x\n", addr, val);
caninfo("%08x->%08x\n", addr, val);
return val;
}
@ -310,12 +295,12 @@ static uint32_t can_getfreg(struct stm32l4_can_s *priv, int offset)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_vputreg(uint32_t addr, uint32_t value)
{
/* Show the register value being written */
llerr("%08x<-%08x\n", addr, value);
caninfo("%08x<-%08x\n", addr, value);
/* Write the value */
@ -358,30 +343,30 @@ static void can_putfreg(struct stm32l4_can_s *priv, int offset, uint32_t value)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpctrlregs(struct stm32l4_can_s *priv, FAR const char *msg)
{
if (msg)
{
canllerr("Control Registers: %s\n", msg);
caninfo("Control Registers: %s\n", msg);
}
else
{
canllerr("Control Registers:\n");
caninfo("Control Registers:\n");
}
/* CAN control and status registers */
llerr(" MCR: %08x MSR: %08x TSR: %08x\n",
caninfo(" MCR: %08x MSR: %08x TSR: %08x\n",
getreg32(priv->base + STM32L4_CAN_MCR_OFFSET),
getreg32(priv->base + STM32L4_CAN_MSR_OFFSET),
getreg32(priv->base + STM32L4_CAN_TSR_OFFSET));
llerr(" RF0R: %08x RF1R: %08x\n",
caninfo(" RF0R: %08x RF1R: %08x\n",
getreg32(priv->base + STM32L4_CAN_RF0R_OFFSET),
getreg32(priv->base + STM32L4_CAN_RF1R_OFFSET));
llerr(" IER: %08x ESR: %08x BTR: %08x\n",
caninfo(" IER: %08x ESR: %08x BTR: %08x\n",
getreg32(priv->base + STM32L4_CAN_IER_OFFSET),
getreg32(priv->base + STM32L4_CAN_ESR_OFFSET),
getreg32(priv->base + STM32L4_CAN_BTR_OFFSET));
@ -402,45 +387,45 @@ static void can_dumpctrlregs(struct stm32l4_can_s *priv, FAR const char *msg)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpmbregs(struct stm32l4_can_s *priv, FAR const char *msg)
{
if (msg)
{
canllerr("Mailbox Registers: %s\n", msg);
caninfo("Mailbox Registers: %s\n", msg);
}
else
{
canllerr("Mailbox Registers:\n");
caninfo("Mailbox Registers:\n");
}
/* CAN mailbox registers (3 TX and 2 RX) */
llerr(" TI0R: %08x TDT0R: %08x TDL0R: %08x TDH0R: %08x\n",
caninfo(" TI0R: %08x TDT0R: %08x TDL0R: %08x TDH0R: %08x\n",
getreg32(priv->base + STM32L4_CAN_TI0R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDT0R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDL0R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDH0R_OFFSET));
llerr(" TI1R: %08x TDT1R: %08x TDL1R: %08x TDH1R: %08x\n",
caninfo(" TI1R: %08x TDT1R: %08x TDL1R: %08x TDH1R: %08x\n",
getreg32(priv->base + STM32L4_CAN_TI1R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDT1R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDL1R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDH1R_OFFSET));
llerr(" TI2R: %08x TDT2R: %08x TDL2R: %08x TDH2R: %08x\n",
caninfo(" TI2R: %08x TDT2R: %08x TDL2R: %08x TDH2R: %08x\n",
getreg32(priv->base + STM32L4_CAN_TI2R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDT2R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDL2R_OFFSET),
getreg32(priv->base + STM32L4_CAN_TDH2R_OFFSET));
llerr(" RI0R: %08x RDT0R: %08x RDL0R: %08x RDH0R: %08x\n",
caninfo(" RI0R: %08x RDT0R: %08x RDL0R: %08x RDH0R: %08x\n",
getreg32(priv->base + STM32L4_CAN_RI0R_OFFSET),
getreg32(priv->base + STM32L4_CAN_RDT0R_OFFSET),
getreg32(priv->base + STM32L4_CAN_RDL0R_OFFSET),
getreg32(priv->base + STM32L4_CAN_RDH0R_OFFSET));
llerr(" RI1R: %08x RDT1R: %08x RDL1R: %08x RDH1R: %08x\n",
caninfo(" RI1R: %08x RDT1R: %08x RDL1R: %08x RDH1R: %08x\n",
getreg32(priv->base + STM32L4_CAN_RI1R_OFFSET),
getreg32(priv->base + STM32L4_CAN_RDT1R_OFFSET),
getreg32(priv->base + STM32L4_CAN_RDL1R_OFFSET),
@ -462,21 +447,21 @@ static void can_dumpmbregs(struct stm32l4_can_s *priv, FAR const char *msg)
*
****************************************************************************/
#ifdef CONFIG_CAN_REGDEBUG
#ifdef CONFIG_STM32_CAN_REGDEBUG
static void can_dumpfiltregs(struct stm32l4_can_s *priv, FAR const char *msg)
{
int i;
if (msg)
{
canllerr("Filter Registers: %s\n", msg);
caninfo("Filter Registers: %s\n", msg);
}
else
{
canllerr("Filter Registers:\n");
caninfo("Filter Registers:\n");
}
llerr(" FMR: %08x FM1R: %08x FS1R: %08x FFA1R: %08x FA1R: %08x\n",
caninfo(" FMR: %08x FM1R: %08x FS1R: %08x FFA1R: %08x FA1R: %08x\n",
getreg32(priv->base + STM32L4_CAN_FMR_OFFSET),
getreg32(priv->base + STM32L4_CAN_FM1R_OFFSET),
getreg32(priv->base + STM32L4_CAN_FS1R_OFFSET),
@ -485,7 +470,7 @@ static void can_dumpfiltregs(struct stm32l4_can_s *priv, FAR const char *msg)
for (i = 0; i < CAN_NFILTERS; i++)
{
llerr(" F%dR1: %08x F%dR2: %08x\n",
caninfo(" F%dR1: %08x F%dR2: %08x\n",
i, getreg32(priv->base + STM32L4_CAN_FIR_OFFSET(i, 1)),
i, getreg32(priv->base + STM32L4_CAN_FIR_OFFSET(i, 2)));
}
@ -526,7 +511,7 @@ static void can_reset(FAR struct can_dev_s *dev)
else
#endif
{
canllerr("Unsupported port %d\n", priv->port);
canerr("ERROR: Unsupported port %d\n", priv->port);
return;
}
@ -576,7 +561,7 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = can_cellinit(priv);
if (ret < 0)
{
canllerr("CAN%d cell initialization failed: %d\n", priv->port, ret);
canerr("ERROR: CAN%d cell initialization failed: %d\n", priv->port, ret);
return ret;
}
@ -588,7 +573,7 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = can_filterinit(priv);
if (ret < 0)
{
canllerr("CAN%d filter initialization failed: %d\n", priv->port, ret);
canerr("ERROR: CAN%d filter initialization failed: %d\n", priv->port, ret);
return ret;
}
@ -599,14 +584,14 @@ static int can_setup(FAR struct can_dev_s *dev)
ret = irq_attach(priv->canrx0, can_rx0interrupt);
if (ret < 0)
{
canllerr("Failed to attach CAN%d RX0 IRQ (%d)", priv->port, priv->canrx0);
canerr("ERROR: Failed to attach CAN%d RX0 IRQ (%d)", priv->port, priv->canrx0);
return ret;
}
ret = irq_attach(priv->cantx, can_txinterrupt);
if (ret < 0)
{
canllerr("Failed to attach CAN%d TX IRQ (%d)", priv->port, priv->cantx);
canerr("ERROR: Failed to attach CAN%d TX IRQ (%d)", priv->port, priv->cantx);
return ret;
}
@ -815,7 +800,7 @@ static int can_send(FAR struct can_dev_s *dev, FAR struct can_msg_s *msg)
}
else
{
canllerr("ERROR: No available mailbox\n");
canerr("ERROR: No available mailbox\n");
return -EBUSY;
}
@ -1029,7 +1014,7 @@ static int can_rx0interrupt(int irq, void *context)
npending = (regval & CAN_RFR_FMP_MASK) >> CAN_RFR_FMP_SHIFT;
if (npending < 1)
{
canllerr("WARNING: No messages pending\n");
canwarn("WARNING: No messages pending\n");
return OK;
}
@ -1053,7 +1038,7 @@ static int can_rx0interrupt(int irq, void *context)
#else
if ((regval & CAN_RIR_IDE) != 0)
{
canllerr("ERROR: Received message with extended identifier. Dropped\n");
canerr("ERROR: Received message with extended identifier. Dropped\n");
ret = -ENOSYS;
goto errout;
}
@ -1392,7 +1377,7 @@ static int can_cellinit(struct stm32l4_can_s *priv)
if (timeout < 1)
{
canllerr("ERROR: Timed out waiting to enter initialization mode\n");
canerr("ERROR: Timed out waiting to enter initialization mode\n");
return -ETIMEDOUT;
}
@ -1415,7 +1400,7 @@ static int can_cellinit(struct stm32l4_can_s *priv)
ret = can_bittiming(priv);
if (ret < 0)
{
canllerr("ERROR: Failed to set bit timing: %d\n", ret);
canerr("ERROR: Failed to set bit timing: %d\n", ret);
return ret;
}
@ -1442,7 +1427,7 @@ static int can_cellinit(struct stm32l4_can_s *priv)
if (timeout < 1)
{
canllerr("ERROR: Timed out waiting to exit initialization mode: %08x\n", regval);
canerr("ERROR: Timed out waiting to exit initialization mode: %08x\n", regval);
return -ETIMEDOUT;
}

2
configs/cloudctrl/README.txt
View File

@ -651,7 +651,7 @@ Cloudctrl-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
Cloudctrl LCD Hardware Configuration

2
configs/fire-stm32v2/README.txt
View File

@ -758,7 +758,7 @@ M3 Wildfire-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
M3 Wildfire LCD Hardware Configuration

2
configs/hymini-stm32v/README.txt
View File

@ -502,7 +502,7 @@ HY-Mini specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
HY-MiniSTM32V LCD Hardware Configuration. The HY-Mini board may be delivered with

2
configs/mikroe-stm32f4/README.txt
View File

@ -660,7 +660,7 @@ Mikroe-STM32F4-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
Mikroe-STM32F4 SPI Configuration

31
configs/nucleo-f303re/src/stm32_can.c
View File

@ -52,37 +52,6 @@
#if defined(CONFIG_CAN) && defined(CONFIG_STM32_CAN1)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/

19
configs/olimex-lpc1766stk/src/lpc17_can.c
View File

@ -73,25 +73,6 @@
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

19
configs/olimex-stm32-h405/src/stm32_can.c
View File

@ -65,25 +65,6 @@
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

15
configs/olimex-stm32-h407/src/stm32_can.c
View File

@ -65,21 +65,6 @@
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Public Functions
************************************************************************************/

19
configs/olimex-stm32-p107/src/stm32_can.c
View File

@ -61,25 +61,6 @@
#define CAN_PORT 1
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

19
configs/olimex-stm32-p207/src/stm32_can.c
View File

@ -65,25 +65,6 @@
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

19
configs/olimexino-stm32/src/stm32_can.c
View File

@ -64,25 +64,6 @@
#define CAN_PORT 1
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

19
configs/sama5d3-xplained/src/sam_can.c
View File

@ -69,25 +69,6 @@
# define CAN_PORT 1
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

19
configs/sama5d3x-ek/src/sam_can.c
View File

@ -69,25 +69,6 @@
# define CAN_PORT 1
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

2
configs/same70-xplained/README.txt
View File

@ -747,7 +747,7 @@ MCAN1 Loopback Test
Build Setup -> Debug Options
CONFIG_DEBUG_FEATURES=y # Enables general debug features
CONFIG_DEBUG_INFO=y # Enables verbose output
CONFIG_DEBUG_CAN=y # Enables debug output from CAN
CONFIG_DEBUG_CAN_INFO=y # Enables debug output from CAN
CONFIG_STACK_COLORATION=y # Monitor stack usage
CONFIG_DEBUG_SYMBOLS=y # Needed only for use with a debugger

15
configs/same70-xplained/src/sam_mcan.c
View File

@ -67,21 +67,6 @@
# define CAN_PORT 1
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Public Functions
************************************************************************************/

2
configs/samv71-xult/README.txt
View File

@ -1337,7 +1337,7 @@ MCAN1 Loopback Test
Build Setup -> Debug Options
CONFIG_DEBUG_FEATURES=y # Enables general debug features
CONFIG_DEBUG_INFO=y # Enables verbose output
CONFIG_DEBUG_CAN=y # Enables debug output from CAN
CONFIG_DEBUG_CAN_INFO=y # Enables debug output from CAN
CONFIG_STACK_COLORATION=y # Monitor stack usage
CONFIG_DEBUG_SYMBOLS=y # Needed only for use with a debugger

15
configs/samv71-xult/src/sam_mcan.c
View File

@ -67,21 +67,6 @@
# define CAN_PORT 1
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Public Functions
************************************************************************************/

2
configs/shenzhou/README.txt
View File

@ -668,7 +668,7 @@ Shenzhou-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
Shenzhou LCD Hardware Configuration

19
configs/shenzhou/src/stm32_can.c
View File

@ -62,25 +62,6 @@
#define CAN_PORT 1
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

2
configs/stm3210e-eval/README.txt
View File

@ -657,7 +657,7 @@ STM3210E-EVAL-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM3210E-EVAL LCD Hardware Configuration

19
configs/stm3210e-eval/src/stm32_can.c
View File

@ -62,25 +62,6 @@
#define CAN_PORT 1
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

8
configs/stm3220g-eval/README.txt
View File

@ -486,7 +486,7 @@ Configuration Options:
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
FSMC SRAM
@ -817,7 +817,7 @@ STM3220G-EVAL-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM3220G-EVAL LCD Hardware Configuration
@ -1003,8 +1003,8 @@ Where <subdir> is one of the following:
Special CAN-only debug options:
CONFIG_DEBUG_CAN
CONFIG_CAN_REGDEBUG
CONFIG_DEBUG_CAN_INFO
CONFIG_STM32_CAN_REGDEBUG
6. This example can support an FTP client. In order to build in FTP client
support simply reconfigure NuttX, adding:

19
configs/stm3220g-eval/src/stm32_can.c
View File

@ -70,25 +70,6 @@
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

8
configs/stm3240g-eval/README.txt
View File

@ -382,7 +382,7 @@ Configuration Options:
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
FPU
@ -810,7 +810,7 @@ STM3240G-EVAL-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM3240G-EVAL LCD Hardware Configuration
@ -1179,8 +1179,8 @@ Where <subdir> is one of the following:
Special CAN-only debug options:
CONFIG_DEBUG_CAN
CONFIG_CAN_REGDEBUG
CONFIG_DEBUG_CAN_INFO
CONFIG_STM32_CAN_REGDEBUG
6. This example can support an FTP client. In order to build in FTP client
support simply uncomment the following lines in the defconfig file (before

19
configs/stm3240g-eval/src/stm32_can.c
View File

@ -70,25 +70,6 @@
# define CAN_PORT 2
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

2
configs/stm32_tiny/README.txt
View File

@ -493,7 +493,7 @@ STM32 Tiny - specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM32Tiny SPI Configuration

2
configs/stm32f103-minimum/README.txt
View File

@ -392,7 +392,7 @@ STM32F103 Minimum - specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM32F103 Minimum SPI Configuration

2
configs/stm32f3discovery/README.txt
View File

@ -637,7 +637,7 @@ STM32F3Discovery-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM32F3Discovery SPI Configuration

2
configs/stm32f429i-disco/README.txt
View File

@ -533,7 +533,7 @@ STM32F429I-DISCO-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM32F429I-DISCO SPI Configuration

2
configs/stm32f4discovery/README.txt
View File

@ -1024,7 +1024,7 @@ STM32F4Discovery-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM32F4Discovery SPI Configuration

2
configs/stm32f746g-disco/README.txt
View File

@ -416,7 +416,7 @@ STM32F746G-DISCO-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32F7_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM32F746G-DISCO SPI Configuration

2
configs/stm32ldiscovery/README.txt
View File

@ -707,7 +707,7 @@ STM32L-Discovery-specific Configuration Options
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
CONFIG_STM32_CAN_REGDEBUG - If CONFIG_DEBUG_FEATURES is set, this will generate an
dump of all CAN registers.
STM32L-Discovery SPI Configuration

19
configs/viewtool-stm32f107/src/stm32_can.c
View File

@ -61,25 +61,6 @@
#define CAN_PORT 1
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

21
configs/zkit-arm-1769/src/lpc17_can.c
View File

@ -62,29 +62,10 @@
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
#define CAN_PORT1 1
#define CAN_PORT2 2
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/

15
drivers/can.c
View File

@ -96,21 +96,6 @@
# endif
#endif
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing CAN */
#ifdef CONFIG_DEBUG_CAN
# define canerr err
# define caninfo info
# define canllerr llerr
# define canllinfo llinfo
#else
# define canerr(x...)
# define caninfo(x...)
# define canllerr(x...)
# define canllinfo(x...)
#endif
/* Timing Definitions *******************************************************/
#define HALF_SECOND_MSEC 500

64
include/debug.h
View File

@ -405,6 +405,30 @@
# define allinfo(x...)
#endif
#ifdef CONFIG_DEBUG_CAN_ERROR
# define canerr(format, ...) err(format, ##__VA_ARGS__)
# define canllerr(format, ...) llerr(format, ##__VA_ARGS__)
#else
# define canerr(x...)
# define canllerr(x...)
#endif
#ifdef CONFIG_DEBUG_CAN_WARN
# define canwarn(format, ...) warn(format, ##__VA_ARGS__)
# define canllwarn(format, ...) llwarn(format, ##__VA_ARGS__)
#else
# define canwarn(x...)
# define canllwarn(x...)
#endif
#ifdef CONFIG_DEBUG_CAN_INFO
# define caninfo(format, ...) info(format, ##__VA_ARGS__)
# define canllinfo(format, ...) llinfo(format, ##__VA_ARGS__)
#else
# define caninfo(x...)
# define canllinfo(x...)
#endif
#ifdef CONFIG_DEBUG_GRAPHICS_ERROR
# define gerr(format, ...) err(format, ##__VA_ARGS__)
# define gllerr(format, ...) llerr(format, ##__VA_ARGS__)
@ -922,6 +946,30 @@
# define allinfo (void)
#endif
#ifdef CONFIG_DEBUG_CAN_ERROR
# define canerr err
# define canllerr llerr
#else
# define canerr (void)
# define canllerr (void)
#endif
#ifdef CONFIG_DEBUG_CAN_WARN
# define canwarn warn
# define canllwarn llwarn
#else
# define canwarn (void)
# define canllwarn (void)
#endif
#ifdef CONFIG_DEBUG_CAN_INFO
# define caninfo info
# define canllinfo llinfo
#else
# define caninfo (void)
# define canllinfo (void)
#endif
#ifdef CONFIG_DEBUG_GRAPHICS_ERROR
# define gerr err
# define gllerr llerr
@ -1260,6 +1308,22 @@
# define iinfodumpbuffer(m,b,n)
#endif
#ifdef CONFIG_DEBUG_ANALOG
# define aerrdumpbuffer(m,b,n) errdumpbuffer(m,b,n)
# define ainfodumpbuffer(m,b,n) infodumpbuffer(m,b,n)
#else
# define aerrdumpbuffer(m,b,n)
# define ainfodumpbuffer(m,b,n)
#endif
#ifdef CONFIG_DEBUG_CAN
# define canerrdumpbuffer(m,b,n) errdumpbuffer(m,b,n)
# define caninfodumpbuffer(m,b,n) infodumpbuffer(m,b,n)
#else
# define canerrdumpbuffer(m,b,n)
# define caninfodumpbuffer(m,b,n)
#endif
#ifdef CONFIG_DEBUG_GRAPHICS
# define gerrdumpbuffer(m,b,n) errdumpbuffer(m,b,n)
# define ginfodumpbuffer(m,b,n) infodumpbuffer(m,b,n)