esp32s3: Improve selection of the bootloader being used on Kconfig

- A pre-built IDF bootloader is used by default;
- `ESP32S3_PARTITION_TABLE` requires the IDF bootloader to be built
from sources.
- Native MCUboot also can be used to boot the device. It will be
built from sources and depends on !ESP32S3_PARTITION_TABLE.

arch/xtensa/src/esp32s3/Bootloader.mk

@@ -131,16 +131,6 @@ else ifeq ($(CONFIG_ESP32S3_BOOTLOADER_DOWNLOAD_PREBUILT),y)
 BOOTLOADER_VERSION = latest
 BOOTLOADER_URL     = https://github.com/espressif/esp-nuttx-bootloader/releases/download/$(BOOTLOADER_VERSION)
 
-ifeq ($(CONFIG_ESP32S3_APP_FORMAT_MCUBOOT),y)
-
-bootloader:
-	$(call DOWNLOAD,$(BOOTLOADER_URL),mcuboot-esp32s3.bin,$(TOPDIR)/mcuboot-esp32s3.bin)
-
-clean_bootloader:
-	$(call DELFILE,$(TOPDIR)/mcuboot-esp32s3.bin)
-
-else ifeq ($(CONFIG_ESP32S3_APP_FORMAT_LEGACY),y)
-
 bootloader:
 	$(call DOWNLOAD,$(BOOTLOADER_URL),bootloader-esp32s3.bin,$(TOPDIR)/bootloader-esp32s3.bin)
 	$(call DOWNLOAD,$(BOOTLOADER_URL),partition-table-esp32s3.bin,$(TOPDIR)/partition-table-esp32s3.bin)
@@ -150,5 +140,3 @@ clean_bootloader:
 	$(call DELFILE,$(TOPDIR)/partition-table-esp32s3.bin)
 
 endif
-
-endif

arch/xtensa/src/esp32s3/Kconfig

@@ -1894,7 +1894,8 @@ comment "Partition Table configuration"
 config ESP32S3_PARTITION_TABLE
 	bool "Create MTD partitions from Partition Table"
 	default n
-	depends on ESP32S3_MTD && ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE
+	depends on ESP32S3_MTD && ESP32S3_APP_FORMAT_LEGACY
+	select ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE
 	---help---
 		Decode partition table and initialize partitions as MTD.
 
@@ -2170,42 +2171,28 @@ config ESP32S3_LCD_REGDEBUG
 
 endmenu
 
-menu "Application Image Configuration"
+menu "Bootloader and Image Configuration"
-
-choice
-	prompt "Application Image Format"
-	default ESP32S3_APP_FORMAT_LEGACY
-	---help---
-		Depending on the chosen 2nd stage bootloader, the application may
-		be required to be perform a specific startup routine. Furthermore,
-		the image binary must be formatted according to the definition from
-		the 2nd stage bootloader.
 
 config ESP32S3_APP_FORMAT_LEGACY
-	bool "Legacy format"
+	bool
+	default y if !ESP32S3_APP_FORMAT_MCUBOOT
+	depends on !ESP32S3_APP_FORMAT_MCUBOOT
 	---help---
 		This is the legacy application image format, as supported by the ESP-IDF
 		2nd stage bootloader.
 
 config ESP32S3_APP_FORMAT_MCUBOOT
-	bool "MCUboot-bootable format"
+	bool "Enable MCUboot-bootable format"
 	depends on !MCUBOOT_BOOTLOADER
 	select ESP32S3_HAVE_OTA_PARTITION
+	select ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE
 	---help---
-		The Espressif port of MCUboot supports the loading of unsegmented firmware
+		Enables the Espressif port of MCUboot to be used as 2nd stage bootloader.
-		images.
-
-endchoice # Application Image Format
-
-choice
-	prompt "Source for bootloader binaries"
-	default ESP32S3_BOOTLOADER_DOWNLOAD_PREBUILT
-	---help---
-		Select the action to be taken by the build system for the
-		"make bootloader" target.
 
 config ESP32S3_BOOTLOADER_DOWNLOAD_PREBUILT
-	bool "Download prebuilt binaries"
+	bool
+	default y if !ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE
+	depends on !ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE
 	---help---
 		The build system will download the prebuilt binaries from
 		https://github.com/espressif/esp-nuttx-bootloader according to the chosen
@@ -2219,8 +2206,6 @@ config ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE
 		custom bootloader according to the chosen Application Image Format
 		(ESP32S3_APP_FORMAT_LEGACY or ESP32S3_APP_FORMAT_MCUBOOT) and partition information.
 
-endchoice
-
 choice
 	prompt "Target slot for image flashing"
 	default ESP32S3_ESPTOOL_TARGET_PRIMARY
@@ -2256,11 +2241,37 @@ config ESP32S3_APP_MCUBOOT_HEADER_SIZE
 	default 32
 	depends on ESP32S3_APP_FORMAT_MCUBOOT
 
-config ESP32S3_PARTITION_TABLE_OFFSET
+config ESP32S3_PARTITION_TABLE_OFFSET_DEFAULT
-	hex "Partition Table offset"
+	hex
 	default 0x8000
 	depends on ESP32S3_APP_FORMAT_LEGACY
 
+config ESP32S3_CUSTOM_PARTITION_TABLE_OFFSET
+	bool "Customize partition table offset"
+	default n
+	depends on ESP32S3_APP_FORMAT_LEGACY
+	select ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE
+	---help---
+		Enable to select the offset of the partition table in the flash.
+
+if ESP32S3_CUSTOM_PARTITION_TABLE_OFFSET
+
+config ESP32S3_PARTITION_TABLE_OFFSET
+	hex "Partition Table offset"
+	default ESP32S3_PARTITION_TABLE_OFFSET_DEFAULT
+	depends on ESP32S3_APP_FORMAT_LEGACY
+
+endif # ESP32S3_CUSTOM_PARTITION_TABLE_OFFSET
+
+if !ESP32S3_CUSTOM_PARTITION_TABLE_OFFSET
+
+config ESP32S3_PARTITION_TABLE_OFFSET
+	hex
+	default ESP32S3_PARTITION_TABLE_OFFSET_DEFAULT
+	depends on ESP32S3_APP_FORMAT_LEGACY
+
+endif # !ESP32S3_CUSTOM_PARTITION_TABLE_OFFSET
+
 config ESP32S3_KERNEL_OFFSET
 	hex
 	default 0x10000
@@ -2294,6 +2305,6 @@ config ESP32S3_KERNEL_RAM_SIZE
 
 endif # BUILD_PROTECTED
 
-endmenu # Application Image Configuration
+endmenu # Bootloader and Image Configuration
 
 endif # ARCH_CHIP_ESP32S3

boards/xtensa/esp32s3/esp32s3-devkit/configs/mcuboot_nsh/defconfig

@@ -22,7 +22,6 @@ CONFIG_BOARDCTL_RESET=y
 CONFIG_BOARD_LOOPSPERMSEC=16717
 CONFIG_BUILTIN=y
 CONFIG_ESP32S3_APP_FORMAT_MCUBOOT=y
-CONFIG_ESP32S3_BOOTLOADER_BUILD_FROM_SOURCE=y
 CONFIG_ESP32S3_SPIFLASH=y
 CONFIG_ESP32S3_UART0=y
 CONFIG_FS_PROCFS=y