sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

I2C tool no longer hangs on dev command

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3930 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2011-08-30 19:48:47 +00:00
parent 394d468661
commit 64d78eec58
2 changed files with 38 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
arch/arm/src/stm32/chip/stm32_i2c.h
View File

@ -147,7 +147,8 @@
#define I2C_SR1_TIMEOUT (1 << 14) /* Bit 14: Timeout or Tlow Error */
#define I2C_SR1_SMBALERT (1 << 15) /* Bit 15: SMBus Alert */
#define I2C_SR1_ERRORMASK (I2C_SR1_BERR|I2C_SR1_ARLO|I2C_SR1_AF|I2C_SR1_OVR|I2C_SR1_PECERR)
#define I2C_SR1_ERRORMASK (I2C_SR1_BERR|I2C_SR1_ARLO|I2C_SR1_AF|I2C_SR1_OVR|\
I2C_SR1_PECERR|I2C_SR1_TIMEOUT|I2C_SR1_SMBALERT)
/* Status register 2 */

43
arch/arm/src/stm32/stm32_i2c.c
View File

@ -90,6 +90,16 @@
#if defined(CONFIG_STM32_I2C1) || defined(CONFIG_STM32_I2C2)
/************************************************************************************
* Pre-processor Definitions
************************************************************************************/
/* Configuration ********************************************************************/
/* Interrupt wait timeout in milliseconds */
#ifndef CONFIG_STM32_I2CTIMEOMS
# define CONFIG_STM32_I2CTIMEOMS 50
#endif
/************************************************************************************
* Private Types
************************************************************************************/
@ -183,10 +193,27 @@ void inline stm32_i2c_sem_wait(FAR struct i2c_dev_s *dev)
int inline stm32_i2c_sem_waitisr(FAR struct i2c_dev_s *dev)
{
while( sem_wait( &((struct stm32_i2c_inst_s *)dev)->priv->sem_isr ) != 0 ) {
ASSERT(errno == EINTR);
struct timespec abstime;
irqstate_t flags;
int ret;
flags = irqsave();
do
{
(void)clock_settime(CLOCK_REALTIME, &abstime);
abstime.tv_nsec += CONFIG_STM32_I2CTIMEOMS * 1000 * 1000;
if (abstime.tv_nsec > 1000 * 1000 * 1000)
{
abstime.tv_sec++;
abstime.tv_nsec -= 1000 * 1000 * 1000;
}
ret = sem_timedwait(&((struct stm32_i2c_inst_s *)dev)->priv->sem_isr, &abstime);
}
return OK;
while (ret != OK && errno == EINTR);
irqrestore(flags);
return ret;
}
void inline stm32_i2c_sem_post(FAR struct i2c_dev_s *dev)
@ -270,7 +297,7 @@ static inline uint32_t stm32_i2c_getstatus(FAR struct stm32_i2c_priv_s *priv)
static int stm32_i2c_isr(struct stm32_i2c_priv_s * priv)
{
uint32_t status = stm32_i2c_getstatus(priv);
#ifdef NON_ISR
static uint32_t isr_count = 0;
static uint32_t old_status = 0xFFFF;
@ -285,7 +312,7 @@ static int stm32_i2c_isr(struct stm32_i2c_priv_s * priv)
/* Was start bit sent */
if (status & I2C_SR1_SB) {
/* Get run-time data */
priv->ptr = priv->msgv->buffer;
@ -315,7 +342,7 @@ static int stm32_i2c_isr(struct stm32_i2c_priv_s * priv)
else if (status & I2C_SR1_ADD10) {
/* \todo Finish 10-bit mode addressing */
}
/* Was address sent, continue with ether sending or reading data */
@ -341,7 +368,7 @@ static int stm32_i2c_isr(struct stm32_i2c_priv_s * priv)
/* More bytes to read */
else if ( status & I2C_SR1_RXNE ) {
/* Read a byte, if dcnt goes < 0, then read dummy bytes to ack ISRs */
#ifdef NON_ISR
@ -376,6 +403,7 @@ static int stm32_i2c_isr(struct stm32_i2c_priv_s * priv)
*/
if (priv->dcnt<=0 && (status & I2C_SR1_BTF)) {
#ifdef NON_ISR
printf("BTF\n");
#endif
@ -641,6 +669,7 @@ int stm32_i2c_process(FAR struct i2c_dev_s *dev, FAR struct i2c_msg_s *msgs, int
if (stm32_i2c_sem_waitisr(dev) == ERROR) {
status = stm32_i2c_getstatus(inst->priv);
status_errno = ETIMEDOUT;
}
else status = inst->priv->status & 0xFFFF; /* clear SR2 (BUSY flag) as we've done successfully */
#else