SAMA5D4-EK: Add an SDRAM test configuration
This commit is contained in:
Gregory Nutt
parent
260c2676d4
commit
67630a1112
@ -75,7 +75,6 @@ Contents
|
|||||||
- SDRAM Support
|
- SDRAM Support
|
||||||
- NAND Support
|
- NAND Support
|
||||||
- I2C Tool
|
- I2C Tool
|
||||||
- CAN Usage
|
|
||||||
- SAMA5 ADC Support
|
- SAMA5 ADC Support
|
||||||
- SAMA5 PWM Support
|
- SAMA5 PWM Support
|
||||||
- RTC
|
- RTC
|
||||||
@ -2170,90 +2169,6 @@ I2C Tool
|
|||||||
Address 0x1a is the WM8904. Address 0x39 is the SIL9022A. I am not sure
|
Address 0x1a is the WM8904. Address 0x39 is the SIL9022A. I am not sure
|
||||||
what is at address 0x3d and 0x60
|
what is at address 0x3d and 0x60
|
||||||
|
|
||||||
CAN Usage
|
|
||||||
=========
|
|
||||||
I planned to verify CAN using the IXXAT USB-to-CAN Compact. This section
|
|
||||||
provides miscellaneous CAN-related notes, mostly to myself but perhaps of
|
|
||||||
interest to others.
|
|
||||||
|
|
||||||
[Unfortunately, as of this writing, I still do not have a proper CAN test
|
|
||||||
bed to verify the CAN driver.]
|
|
||||||
|
|
||||||
CAN Configuration
|
|
||||||
-----------------
|
|
||||||
|
|
||||||
The following steps illustrate how to enable CAN0 and/or CAN1 in the NuttX
|
|
||||||
configuration:
|
|
||||||
|
|
||||||
System Type -> SAMA5 Peripheral Support
|
|
||||||
CONFIG_SAMA5_CAN0=y : Select CAN0 and/or CAN1
|
|
||||||
CONFIG_SAMA5_CAN1=y
|
|
||||||
|
|
||||||
Device Drivers -> CAN Driver Support
|
|
||||||
CONFIG_CAN=y : (Automatically selected)
|
|
||||||
CONFIG_CAN_EXTID=y : For extended, 29-bit CAN IDs
|
|
||||||
|
|
||||||
System Type -> CAN Drive Support
|
|
||||||
CONFIG_SAMA5_CAN0_BAUD=250000 : Select some BAUD for CAN0 (if enabled)
|
|
||||||
CONFIG_SAMA5_CAN0_NRECVMB=1 : Select number of receive mailboxes (see below)
|
|
||||||
CONFIG_SAMA5_CAN1_BAUD=250000 : Select some BAUD for CAN1 (if enabled)
|
|
||||||
CONFIG_SAMA5_CAN1_NRECVMB=1 : Select number of receive mailboxes (see below)
|
|
||||||
|
|
||||||
Receive Mailboxes and Address Filtering
|
|
||||||
---------------------------------------
|
|
||||||
|
|
||||||
The SAMA5 CAN0 peripheral supports 8 mailboxes that can be used for sending
|
|
||||||
and receiving messages. Note that the number of dedicated receive mailboxes
|
|
||||||
(CONFIG_SAMA5_CANn_NRECVMB) was set to one in the above configuration. This
|
|
||||||
could be set to any value from 1 to 3 (the upper limit of 3 is purely
|
|
||||||
arbrary and can be increased with some minor code enhancement). The
|
|
||||||
remainder can be configured dynamically to send CAN messages.
|
|
||||||
|
|
||||||
Why would you want to use more than one receive mailbox? There are two
|
|
||||||
reasons. Multiple receive mailboxes might needed to either (1) receive
|
|
||||||
bursts of messages, or (2) to support multiple groups of messages filtered
|
|
||||||
on message ID.
|
|
||||||
|
|
||||||
You must also specify the address filtering for each dedicated receive mailbox:
|
|
||||||
|
|
||||||
System Type -> CAN Drive Support
|
|
||||||
CONFIG_SAMA5_CAN0_ADDR0 and CONFIG_SAMA5_CAN0_MASK0 : If CONFIG_SAMA5_CAN0_NRECVMB >= 1
|
|
||||||
CONFIG_SAMA5_CAN0_ADDR1 and CONFIG_SAMA5_CAN0_MASK1 : If CONFIG_SAMA5_CAN0_NRECVMB >= 2
|
|
||||||
CONFIG_SAMA5_CAN0_ADDR2 and CONFIG_SAMA5_CAN0_MASK2 : If CONFIG_SAMA5_CAN0_NRECVMB >= 3
|
|
||||||
CONFIG_SAMA5_CAN1_ADDR0 and CONFIG_SAMA5_CAN1_MASK0 : If CONFIG_SAMA5_CAN1_NRECVMB >= 1
|
|
||||||
CONFIG_SAMA5_CAN1_ADDR1 and CONFIG_SAMA5_CAN1_MASK1 : If CONFIG_SAMA5_CAN1_NRECVMB >= 2
|
|
||||||
CONFIG_SAMA5_CAN1_ADDR2 and CONFIG_SAMA5_CAN1_MASK2 : If CONFIG_SAMA5_CAN1_NRECVMB >= 3
|
|
||||||
|
|
||||||
Only messages that have IDs that match the CONFIG_SAMA5_CANn_ADDRn when both
|
|
||||||
the received and the configured address are masked by CONFIG_SAMA5_CANn_MASKn
|
|
||||||
will be accepted. For example, if the mask is all ones, then only messasges
|
|
||||||
with exact address matches will be accepted; if the mask is all zeroes than
|
|
||||||
any address will be accepted.
|
|
||||||
|
|
||||||
CAN connectors
|
|
||||||
--------------
|
|
||||||
|
|
||||||
CAN1 and CAN2 are available via RJ-11 connectors on the SAMA4D4-EK. Each
|
|
||||||
is wired as follows. Also shown below is the matching pins if you want connect
|
|
||||||
the CAN to a device that uses an DB-9 connector (Such as the IXXAT USB-to-CAN
|
|
||||||
Compact). Both connector types (as well as RJ-45) are common.
|
|
||||||
|
|
||||||
+----------+ RJ-11 DB-9
|
|
||||||
| O | ----------- --------------
|
|
||||||
+------------+ | | Pin 1 3v3 Pin 1 N/C
|
|
||||||
| +--+ | | o5 | Pin 2 5v Pin 2 CANL
|
|
||||||
| | | | | o9 | Pin 3 N/C Pin 3 GND
|
|
||||||
| +-+ +-+ | | o4 | Pin 4 CANL Pin 4 N/C
|
|
||||||
| | | | | o8 | Pin 5 CANH Pin 5 N/C
|
|
||||||
| |654321| | | o3 | Pin 6 N/C Pin 6 N/C
|
|
||||||
| |oooooo| | | o7 | Pin 7 CANH
|
|
||||||
| +------+ | | o2 | Pin 8 N/C
|
|
||||||
+------------+ | o6 | Pin 9 CANV+ (N/C on IXXAT) RJ-11 Female | x1 |
|
|
||||||
| |
|
|
||||||
| O |
|
|
||||||
+----------+
|
|
||||||
DB-9 Male
|
|
||||||
|
|
||||||
SAMA5 ADC Support
|
SAMA5 ADC Support
|
||||||
=================
|
=================
|
||||||
|
|
||||||
@ -2721,8 +2636,6 @@ SAMA4D4-EK Configuration Options
|
|||||||
CONFIG_SAMA5_ISI - Image Sensor Interface
|
CONFIG_SAMA5_ISI - Image Sensor Interface
|
||||||
CONFIG_SAMA5_SSC0 - Synchronous Serial Controller 0
|
CONFIG_SAMA5_SSC0 - Synchronous Serial Controller 0
|
||||||
CONFIG_SAMA5_SSC1 - Synchronous Serial Controller 1
|
CONFIG_SAMA5_SSC1 - Synchronous Serial Controller 1
|
||||||
CONFIG_SAMA5_CAN0 - CAN controller 0
|
|
||||||
CONFIG_SAMA5_CAN1 - CAN controller 1
|
|
||||||
CONFIG_SAMA5_SHA - Secure Hash Algorithm
|
CONFIG_SAMA5_SHA - Secure Hash Algorithm
|
||||||
CONFIG_SAMA5_AES - Advanced Encryption Standard
|
CONFIG_SAMA5_AES - Advanced Encryption Standard
|
||||||
CONFIG_SAMA5_TDES - Triple Data Encryption Standard
|
CONFIG_SAMA5_TDES - Triple Data Encryption Standard
|
||||||
@ -2900,6 +2813,10 @@ Configurations
|
|||||||
demo configuration. The nsh configuration is, however, bare bones.
|
demo configuration. The nsh configuration is, however, bare bones.
|
||||||
It is the simplest possible NSH configuration and is useful as a
|
It is the simplest possible NSH configuration and is useful as a
|
||||||
platform for debugging and integrating new features in isolation.
|
platform for debugging and integrating new features in isolation.
|
||||||
|
ramtest: This is a stripped down version of NSH that runs out of
|
||||||
|
internal SRAM. It configures SDRAM and supports only the RAM test
|
||||||
|
at apps/examples/ramtest. This configuration is useful for
|
||||||
|
bringing up SDRAM.
|
||||||
|
|
||||||
There may be issues with some of these configurations. See the details
|
There may be issues with some of these configurations. See the details
|
||||||
before of the status of individual configurations.
|
before of the status of individual configurations.
|
||||||
@ -2908,15 +2825,13 @@ Configurations
|
|||||||
|
|
||||||
nsh:
|
nsh:
|
||||||
|
|
||||||
This configuration directory provide the NuttShell (NSH). There are
|
This configuration directory provide the NuttShell (NSH). This is a
|
||||||
two NSH configurations: nsh and demo. The difference is that nsh is
|
very simple NSH configuration upon which you can build further
|
||||||
intended to be a very simple NSH configuration upon which you can build
|
functionality.
|
||||||
further functionality. The demo configuration, on the other hand, is
|
|
||||||
intended to be a rich configuration that shows many features all working
|
|
||||||
together.
|
|
||||||
|
|
||||||
NOTES:
|
NOTES:
|
||||||
1. This configuration uses the default DBGU serial console. That
|
1. This configuration uses the the USART3 for the serial console
|
||||||
|
which is available at the "DBGU" RS-232 connector (J24). That
|
||||||
is easily changed by reconfiguring to (1) enable a different
|
is easily changed by reconfiguring to (1) enable a different
|
||||||
serial peripheral, and (2) selecting that serial peripheral as
|
serial peripheral, and (2) selecting that serial peripheral as
|
||||||
the console device.
|
the console device.
|
||||||
@ -2950,11 +2865,11 @@ Configurations
|
|||||||
4. This configuration has support for NSH built-in applications enabled.
|
4. This configuration has support for NSH built-in applications enabled.
|
||||||
However, no built-in applications are selected in the base configuration.
|
However, no built-in applications are selected in the base configuration.
|
||||||
|
|
||||||
5. This configuration has support for the FAT file system built in. However,
|
5. This configuration has support for the FAT file system built in.
|
||||||
by default, there are no block drivers initialized. The FAT file system can
|
However, by default, there are no block drivers initialized. The FAT
|
||||||
still be used to create RAM disks.
|
file system can still be used to create RAM disks.
|
||||||
|
|
||||||
6. The SAMA5D4-EK includes for an At25 serial DataFlash. Support for that
|
6. The SAMA5D4-EK includes for an AT25 serial DataFlash. Support for that
|
||||||
serial FLASH can be enabled by modifying the NuttX configuration as
|
serial FLASH can be enabled by modifying the NuttX configuration as
|
||||||
described above in the paragraph entitled "AT25 Serial FLASH".
|
described above in the paragraph entitled "AT25 Serial FLASH".
|
||||||
|
|
||||||
@ -2992,14 +2907,42 @@ Configurations
|
|||||||
that it provides /dev/random. See the section entitled "TRNG and
|
that it provides /dev/random. See the section entitled "TRNG and
|
||||||
/dev/random" above for detailed configuration information.
|
/dev/random" above for detailed configuration information.
|
||||||
|
|
||||||
16. See also the sections above for additional configuration options:
|
|
||||||
"CAN Usage", "SAMA5 ADC Support", "SAMA5 PWM Support", "I2S Audio
|
|
||||||
Support"
|
|
||||||
|
|
||||||
STATUS:
|
STATUS:
|
||||||
See the To-Do list below
|
See the To-Do list below
|
||||||
|
|
||||||
2014-4-3: Delay loop calibrated: CONFIG_BOARD_LOOPSPERMSEC=65775
|
ramtest
|
||||||
|
This is a stripped down version of NSH that runs out of
|
||||||
|
internal SRAM. It configures SDRAM and supports only the RAM test
|
||||||
|
at apps/examples/ramtest. This configuration is useful for
|
||||||
|
bringing up SDRAM.
|
||||||
|
|
||||||
|
NOTES:
|
||||||
|
1. This configuration uses the the USART3 for the serial console
|
||||||
|
which is available at the "DBGU" RS-232 connector (J24). That
|
||||||
|
is easily changed by reconfiguring to (1) enable a different
|
||||||
|
serial peripheral, and (2) selecting that serial peripheral as
|
||||||
|
the console device.
|
||||||
|
|
||||||
|
2. By default, this configuration is set up to build on Windows
|
||||||
|
under either a Cygwin or MSYS environment using a recent, Windows-
|
||||||
|
native, generic ARM EABI GCC toolchain (such as the CodeSourcery
|
||||||
|
toolchain). Both the build environment and the toolchain
|
||||||
|
selection can easily be changed by reconfiguring:
|
||||||
|
|
||||||
|
CONFIG_HOST_WINDOWS=y : Windows operating system
|
||||||
|
CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows
|
||||||
|
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
|
||||||
|
|
||||||
|
If you are running on Linux, make *certain* that you have
|
||||||
|
CONFIG_HOST_LINUX=y *before* the first make or you will create a
|
||||||
|
corrupt configuration that may not be easy to recover from. See
|
||||||
|
the warning in the section "Information Common to All Configurations"
|
||||||
|
for further information.
|
||||||
|
|
||||||
|
3. This configuration executes out of internal SRAM flash and is
|
||||||
|
loaded into SRAM by the boot ROM SDRAM from NAND, Serial
|
||||||
|
DataFlash, SD card or from a TFTPC sever via the Boot ROM.
|
||||||
|
Data also is positioned in SDRAM.
|
||||||
|
|
||||||
To-Do List
|
To-Do List
|
||||||
==========
|
==========
|
||||||
@ -3010,10 +2953,7 @@ To-Do List
|
|||||||
|
|
||||||
2) HSCMI TX DMA support is currently commented out.
|
2) HSCMI TX DMA support is currently commented out.
|
||||||
|
|
||||||
3) GMAC has only been tested on a 10/100Base-T network. I don't have a
|
3) Some drivers may require some adjustments if you intend to run from SDRAM.
|
||||||
1000Base-T network to support additional testing.
|
|
||||||
|
|
||||||
4) Some drivers may require some adjustments if you intend to run from SDRAM.
|
|
||||||
That is because in this case macros like BOARD_MCK_FREQUENCY are not constants
|
That is because in this case macros like BOARD_MCK_FREQUENCY are not constants
|
||||||
but are instead function calls: The MCK clock frequency is not known in
|
but are instead function calls: The MCK clock frequency is not known in
|
||||||
advance but instead has to be calculated from the bootloader PLL configuration.
|
advance but instead has to be calculated from the bootloader PLL configuration.
|
||||||
|
|||||||
126
configs/sama5d4-ek/ramtest/Make.defs
Normal file
126
configs/sama5d4-ek/ramtest/Make.defs
Normal file
@ -0,0 +1,126 @@
|
|||||||
|
############################################################################
|
||||||
|
# configs/sama5d4-ek/ramtest/Make.defs
|
||||||
|
#
|
||||||
|
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
############################################################################
|
||||||
|
|
||||||
|
include ${TOPDIR}/.config
|
||||||
|
include ${TOPDIR}/tools/Config.mk
|
||||||
|
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
|
||||||
|
LDSCRIPT = isram.ld
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
|
||||||
|
LDSCRIPT = ddram.ld
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native toolchains
|
||||||
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||||
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||||
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native toolchain
|
||||||
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||||
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||||
|
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||||
|
endif
|
||||||
|
|
||||||
|
CC = $(CROSSDEV)gcc
|
||||||
|
CXX = $(CROSSDEV)g++
|
||||||
|
CPP = $(CROSSDEV)gcc -E
|
||||||
|
LD = $(CROSSDEV)ld
|
||||||
|
AR = $(ARCROSSDEV)ar rcs
|
||||||
|
NM = $(ARCROSSDEV)nm
|
||||||
|
OBJCOPY = $(CROSSDEV)objcopy
|
||||||
|
OBJDUMP = $(CROSSDEV)objdump
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
ARCHOPTIMIZATION = -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||||
|
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||||
|
endif
|
||||||
|
|
||||||
|
ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
|
||||||
|
ARCHCFLAGS = -fno-builtin
|
||||||
|
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||||
|
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||||
|
ARCHWARNINGSXX = -Wall -Wshadow
|
||||||
|
ARCHDEFINES =
|
||||||
|
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||||
|
|
||||||
|
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||||
|
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||||
|
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||||
|
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||||
|
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||||
|
|
||||||
|
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||||
|
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||||
|
LDNXFLATFLAGS = -e main -s 2048
|
||||||
|
|
||||||
|
OBJEXT = .o
|
||||||
|
LIBEXT = .a
|
||||||
|
EXEEXT =
|
||||||
|
|
||||||
|
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||||
|
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||||
|
LDFLAGS += -g
|
||||||
|
endif
|
||||||
|
|
||||||
|
HOSTCC = gcc
|
||||||
|
HOSTINCLUDES = -I.
|
||||||
|
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||||
|
HOSTLDFLAGS =
|
||||||
|
ifeq ($(CONFIG_HOST_WINDOWS),y)
|
||||||
|
HOSTEXEEXT = .exe
|
||||||
|
else
|
||||||
|
HOSTEXEEXT =
|
||||||
|
endif
|
||||||
|
|
||||||
|
ifeq ($(WINTOOL),y)
|
||||||
|
# Windows-native host tools
|
||||||
|
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||||
|
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||||
|
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||||
|
else
|
||||||
|
# Linux/Cygwin-native host tools
|
||||||
|
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||||
|
endif
|
||||||
|
|
||||||
896
configs/sama5d4-ek/ramtest/defconfig
Normal file
896
configs/sama5d4-ek/ramtest/defconfig
Normal file
@ -0,0 +1,896 @@
|
|||||||
|
#
|
||||||
|
# Automatically generated file; DO NOT EDIT.
|
||||||
|
# Nuttx/ Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Setup
|
||||||
|
#
|
||||||
|
# CONFIG_EXPERIMENTAL is not set
|
||||||
|
# CONFIG_DEFAULT_SMALL is not set
|
||||||
|
# CONFIG_HOST_LINUX is not set
|
||||||
|
# CONFIG_HOST_OSX is not set
|
||||||
|
CONFIG_HOST_WINDOWS=y
|
||||||
|
# CONFIG_HOST_OTHER is not set
|
||||||
|
# CONFIG_WINDOWS_NATIVE is not set
|
||||||
|
CONFIG_WINDOWS_CYGWIN=y
|
||||||
|
# CONFIG_WINDOWS_MSYS is not set
|
||||||
|
# CONFIG_WINDOWS_OTHER is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Build Configuration
|
||||||
|
#
|
||||||
|
# CONFIG_APPS_DIR="../apps"
|
||||||
|
# CONFIG_BUILD_2PASS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Output Formats
|
||||||
|
#
|
||||||
|
# CONFIG_RRLOAD_BINARY is not set
|
||||||
|
CONFIG_INTELHEX_BINARY=y
|
||||||
|
# CONFIG_MOTOROLA_SREC is not set
|
||||||
|
CONFIG_RAW_BINARY=y
|
||||||
|
# CONFIG_UBOOT_UIMAGE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Customize Header Files
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_STDINT_H is not set
|
||||||
|
# CONFIG_ARCH_STDBOOL_H is not set
|
||||||
|
# CONFIG_ARCH_MATH_H is not set
|
||||||
|
# CONFIG_ARCH_FLOAT_H is not set
|
||||||
|
# CONFIG_ARCH_STDARG_H is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Debug Options
|
||||||
|
#
|
||||||
|
# CONFIG_DEBUG is not set
|
||||||
|
CONFIG_ARCH_HAVE_STACKCHECK=y
|
||||||
|
# CONFIG_ARCH_HAVE_HEAPCHECK is not set
|
||||||
|
# CONFIG_DEBUG_SYMBOLS is not set
|
||||||
|
CONFIG_ARCH_HAVE_CUSTOMOPT=y
|
||||||
|
# CONFIG_DEBUG_NOOPT is not set
|
||||||
|
# CONFIG_DEBUG_CUSTOMOPT is not set
|
||||||
|
CONFIG_DEBUG_FULLOPT=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Type
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_8051 is not set
|
||||||
|
CONFIG_ARCH_ARM=y
|
||||||
|
# CONFIG_ARCH_AVR is not set
|
||||||
|
# CONFIG_ARCH_HC is not set
|
||||||
|
# CONFIG_ARCH_MIPS is not set
|
||||||
|
# CONFIG_ARCH_RGMP is not set
|
||||||
|
# CONFIG_ARCH_SH is not set
|
||||||
|
# CONFIG_ARCH_SIM is not set
|
||||||
|
# CONFIG_ARCH_X86 is not set
|
||||||
|
# CONFIG_ARCH_Z16 is not set
|
||||||
|
# CONFIG_ARCH_Z80 is not set
|
||||||
|
CONFIG_ARCH="arm"
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARM Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_CHIP_A1X is not set
|
||||||
|
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||||
|
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_IMX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||||
|
# CONFIG_ARCH_CHIP_KL is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LM is not set
|
||||||
|
# CONFIG_ARCH_CHIP_TIVA is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||||
|
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||||
|
CONFIG_ARCH_CHIP_SAMA5=y
|
||||||
|
# CONFIG_ARCH_CHIP_SAMD is not set
|
||||||
|
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||||
|
# CONFIG_ARCH_ARM7TDMI is not set
|
||||||
|
# CONFIG_ARCH_ARM926EJS is not set
|
||||||
|
# CONFIG_ARCH_ARM920T is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM0 is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM3 is not set
|
||||||
|
# CONFIG_ARCH_CORTEXM4 is not set
|
||||||
|
CONFIG_ARCH_CORTEXA5=y
|
||||||
|
# CONFIG_ARCH_CORTEXA8 is not set
|
||||||
|
CONFIG_ARCH_FAMILY="armv7-a"
|
||||||
|
CONFIG_ARCH_CHIP="sama5"
|
||||||
|
CONFIG_ARCH_HAVE_FPU=y
|
||||||
|
CONFIG_ARCH_FPU=y
|
||||||
|
# CONFIG_ARCH_HAVE_MPU is not set
|
||||||
|
CONFIG_ARCH_HAVE_LOWVECTORS=y
|
||||||
|
CONFIG_ARCH_LOWVECTORS=y
|
||||||
|
# CONFIG_ARCH_ROMPGTABLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# ARMv7-A Configuration Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
|
||||||
|
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
|
||||||
|
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SAMA5 Configuration Options
|
||||||
|
#
|
||||||
|
CONFIG_SAMA5_HAVE_AESB=y
|
||||||
|
CONFIG_SAMA5_HAVE_ICM=y
|
||||||
|
CONFIG_SAMA5_HAVE_UART0=y
|
||||||
|
CONFIG_SAMA5_HAVE_UART1=y
|
||||||
|
CONFIG_SAMA5_HAVE_USART4=y
|
||||||
|
# CONFIG_SAMA5_HAVE_CAN0 is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_CAN1 is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_DMA is not set
|
||||||
|
CONFIG_SAMA5_HAVE_DDR32=y
|
||||||
|
CONFIG_SAMA5_HAVE_XDMA=y
|
||||||
|
CONFIG_SAMA5_HAVE_L2CC=y
|
||||||
|
CONFIG_SAMA5_HAVE_LCDC=y
|
||||||
|
# CONFIG_SAMA5_HAVE_GMAC is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_EMACA is not set
|
||||||
|
CONFIG_SAMA5_HAVE_EMACB=y
|
||||||
|
CONFIG_SAMA5_HAVE_EMAC1=y
|
||||||
|
# CONFIG_SAMA5_HAVE_HSMCI2 is not set
|
||||||
|
CONFIG_SAMA5_HAVE_SAIC=y
|
||||||
|
CONFIG_SAMA5_HAVE_SBM=y
|
||||||
|
CONFIG_SAMA5_HAVE_SFC=y
|
||||||
|
CONFIG_SAMA5_HAVE_SPI2=y
|
||||||
|
CONFIG_SAMA5_HAVE_TC1=y
|
||||||
|
CONFIG_SAMA5_HAVE_TC2=y
|
||||||
|
CONFIG_SAMA5_HAVE_TWI3=y
|
||||||
|
CONFIG_SAMA5_HAVE_VDEC=y
|
||||||
|
# CONFIG_ARCH_CHIP_SAMA5D3 is not set
|
||||||
|
CONFIG_ARCH_CHIP_SAMA5D4=y
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D33 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D36 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D41 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D42 is not set
|
||||||
|
# CONFIG_ARCH_CHIP_ATSAMA5D43 is not set
|
||||||
|
CONFIG_ARCH_CHIP_ATSAMA5D44=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# SAMA5 Peripheral Support
|
||||||
|
#
|
||||||
|
# CONFIG_SAMA5_AES is not set
|
||||||
|
# CONFIG_SAMA5_TDES is not set
|
||||||
|
# CONFIG_SAMA5_AESB is not set
|
||||||
|
# CONFIG_SAMA5_DBGU is not set
|
||||||
|
# CONFIG_SAMA5_L2CC is not set
|
||||||
|
# CONFIG_SAMA5_PIT is not set
|
||||||
|
# CONFIG_SAMA5_WDT is not set
|
||||||
|
# CONFIG_SAMA5_RTC is not set
|
||||||
|
# CONFIG_SAMA5_ICM is not set
|
||||||
|
CONFIG_SAMA5_HSMC=y
|
||||||
|
# CONFIG_SAMA5_SMD is not set
|
||||||
|
# CONFIG_SAMA5_UART0 is not set
|
||||||
|
# CONFIG_SAMA5_UART1 is not set
|
||||||
|
# CONFIG_SAMA5_USART0 is not set
|
||||||
|
# CONFIG_SAMA5_USART1 is not set
|
||||||
|
# CONFIG_SAMA5_USART2 is not set
|
||||||
|
CONFIG_SAMA5_USART3=y
|
||||||
|
# CONFIG_SAMA5_USART4 is not set
|
||||||
|
# CONFIG_SAMA5_TWI0 is not set
|
||||||
|
# CONFIG_SAMA5_TWI1 is not set
|
||||||
|
# CONFIG_SAMA5_TWI2 is not set
|
||||||
|
# CONFIG_SAMA5_TWI3 is not set
|
||||||
|
# CONFIG_SAMA5_HSMCI0 is not set
|
||||||
|
# CONFIG_SAMA5_HSMCI1 is not set
|
||||||
|
# CONFIG_SAMA5_SBM is not set
|
||||||
|
# CONFIG_SAMA5_SFC is not set
|
||||||
|
# CONFIG_SAMA5_SPI0 is not set
|
||||||
|
# CONFIG_SAMA5_SPI1 is not set
|
||||||
|
# CONFIG_SAMA5_SPI2 is not set
|
||||||
|
# CONFIG_SAMA5_TC0 is not set
|
||||||
|
# CONFIG_SAMA5_TC1 is not set
|
||||||
|
# CONFIG_SAMA5_TC2 is not set
|
||||||
|
# CONFIG_SAMA5_PWM is not set
|
||||||
|
# CONFIG_SAMA5_ADC is not set
|
||||||
|
# CONFIG_SAMA5_XDMAC0 is not set
|
||||||
|
# CONFIG_SAMA5_XDMAC1 is not set
|
||||||
|
# CONFIG_SAMA5_UHPHS is not set
|
||||||
|
# CONFIG_SAMA5_UDPHS is not set
|
||||||
|
# CONFIG_SAMA5_EMACB is not set
|
||||||
|
# CONFIG_SAMA5_EMAC0 is not set
|
||||||
|
# CONFIG_SAMA5_EMAC1 is not set
|
||||||
|
# CONFIG_SAMA5_LCDC is not set
|
||||||
|
# CONFIG_SAMA5_ISI is not set
|
||||||
|
# CONFIG_SAMA5_SHA is not set
|
||||||
|
# CONFIG_SAMA5_TRNG is not set
|
||||||
|
# CONFIG_SAMA5_ARM is not set
|
||||||
|
# CONFIG_SAMA5_FUSE is not set
|
||||||
|
CONFIG_SAMA5_MPDDRC=y
|
||||||
|
# CONFIG_SAMA5_VDEC is not set
|
||||||
|
# CONFIG_SAMA5_PIO_IRQ is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# External Memory Configuration
|
||||||
|
#
|
||||||
|
CONFIG_SAMA5_DDRCS=y
|
||||||
|
CONFIG_SAMA5_DDRCS_SIZE=26843456
|
||||||
|
# CONFIG_SAMA5_DDRCS_LPDDR1 is not set
|
||||||
|
CONFIG_SAMA5_DDRCS_LPDDR2=y
|
||||||
|
# CONFIG_SAMA5_EBICS0 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS1 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS2 is not set
|
||||||
|
# CONFIG_SAMA5_EBICS3 is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_NAND is not set
|
||||||
|
# CONFIG_SAMA5_HAVE_PMECC is not set
|
||||||
|
CONFIG_SAMA5_BOOT_ISRAM=y
|
||||||
|
# CONFIG_SAMA5_BOOT_SDRAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Heap Configuration
|
||||||
|
#
|
||||||
|
CONFIG_SAMA5_DDRCS_HEAP=y
|
||||||
|
CONFIG_SAMA5_DDRCS_HEAP_OFFSET=0
|
||||||
|
CONFIG_SAMA5_DDRCS_HEAP_SIZE=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Architecture Options
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_NOINTC is not set
|
||||||
|
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||||
|
# CONFIG_ARCH_DMA is not set
|
||||||
|
CONFIG_ARCH_HAVE_IRQPRIO=y
|
||||||
|
# CONFIG_CUSTOM_STACK is not set
|
||||||
|
# CONFIG_ADDRENV is not set
|
||||||
|
CONFIG_ARCH_HAVE_VFORK=y
|
||||||
|
CONFIG_ARCH_HAVE_MMU=y
|
||||||
|
CONFIG_ARCH_NAND_HWECC=y
|
||||||
|
# CONFIG_ARCH_HAVE_EXTCLK is not set
|
||||||
|
# CONFIG_PAGING is not set
|
||||||
|
# CONFIG_ARCH_IRQPRIO is not set
|
||||||
|
CONFIG_ARCH_STACKDUMP=y
|
||||||
|
# CONFIG_ENDIAN_BIG is not set
|
||||||
|
# CONFIG_ARCH_IDLE_CUSTOM is not set
|
||||||
|
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||||
|
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Settings
|
||||||
|
#
|
||||||
|
CONFIG_BOARD_LOOPSPERMSEC=65775
|
||||||
|
# CONFIG_ARCH_CALIBRATION is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interrupt options
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||||
|
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||||
|
# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot options
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||||
|
# CONFIG_BOOT_RUNFROMFLASH is not set
|
||||||
|
CONFIG_BOOT_RUNFROMISRAM=y
|
||||||
|
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||||
|
# CONFIG_BOOT_COPYTORAM is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Boot Memory Configuration
|
||||||
|
#
|
||||||
|
CONFIG_RAM_START=0x00300000
|
||||||
|
CONFIG_RAM_VSTART=0x00300000
|
||||||
|
CONFIG_RAM_SIZE=114688
|
||||||
|
CONFIG_ARCH_HAVE_SDRAM=y
|
||||||
|
# CONFIG_BOOT_SDRAM_DATA is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board Selection
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_BOARD_SAMA5D4_EK=y
|
||||||
|
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||||
|
CONFIG_ARCH_BOARD="sama5d4-ek"
|
||||||
|
|
||||||
|
#
|
||||||
|
# Common Board Options
|
||||||
|
#
|
||||||
|
CONFIG_ARCH_HAVE_LEDS=y
|
||||||
|
CONFIG_ARCH_LEDS=y
|
||||||
|
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||||
|
# CONFIG_ARCH_BUTTONS is not set
|
||||||
|
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||||
|
CONFIG_NSH_MMCSDMINOR=0
|
||||||
|
|
||||||
|
#
|
||||||
|
# Board-Specific Options
|
||||||
|
#
|
||||||
|
# CONFIG_SAMA5D4EK_384MHZ is not set
|
||||||
|
CONFIG_SAMA5D4EK_396MHZ=y
|
||||||
|
# CONFIG_SAMA5D4EK_528MHZ is not set
|
||||||
|
CONFIG_SAMA5D4EK_MT47H128M16RT=y
|
||||||
|
# CONFIG_SAMA5D4EK_MT47H64M16HR is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS Features
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_OS_API=y
|
||||||
|
# CONFIG_DISABLE_CLOCK is not set
|
||||||
|
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||||
|
# CONFIG_DISABLE_PTHREAD is not set
|
||||||
|
# CONFIG_DISABLE_SIGNALS is not set
|
||||||
|
# CONFIG_DISABLE_MQUEUE is not set
|
||||||
|
CONFIG_DISABLE_ENVIRON=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Clocks and Timers
|
||||||
|
#
|
||||||
|
CONFIG_MSEC_PER_TICK=10
|
||||||
|
# CONFIG_SYSTEM_TIME64 is not set
|
||||||
|
# CONFIG_CLOCK_MONOTONIC is not set
|
||||||
|
# CONFIG_JULIAN_TIME is not set
|
||||||
|
CONFIG_START_YEAR=2014
|
||||||
|
CONFIG_START_MONTH=7
|
||||||
|
CONFIG_START_DAY=31
|
||||||
|
CONFIG_MAX_WDOGPARMS=2
|
||||||
|
CONFIG_PREALLOC_WDOGS=16
|
||||||
|
CONFIG_PREALLOC_TIMERS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Tasks and Scheduling
|
||||||
|
#
|
||||||
|
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||||
|
CONFIG_RR_INTERVAL=200
|
||||||
|
CONFIG_TASK_NAME_SIZE=32
|
||||||
|
CONFIG_MAX_TASK_ARGS=4
|
||||||
|
CONFIG_MAX_TASKS=16
|
||||||
|
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||||
|
CONFIG_SCHED_WAITPID=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Pthread Options
|
||||||
|
#
|
||||||
|
# CONFIG_MUTEX_TYPES is not set
|
||||||
|
CONFIG_NPTHREAD_KEYS=4
|
||||||
|
|
||||||
|
#
|
||||||
|
# Performance Monitoring
|
||||||
|
#
|
||||||
|
# CONFIG_SCHED_CPULOAD is not set
|
||||||
|
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Files and I/O
|
||||||
|
#
|
||||||
|
CONFIG_DEV_CONSOLE=y
|
||||||
|
# CONFIG_FDCLONE_DISABLE is not set
|
||||||
|
# CONFIG_FDCLONE_STDIO is not set
|
||||||
|
CONFIG_SDCLONE_DISABLE=y
|
||||||
|
CONFIG_NFILE_DESCRIPTORS=8
|
||||||
|
CONFIG_NFILE_STREAMS=8
|
||||||
|
CONFIG_NAME_MAX=32
|
||||||
|
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RTOS hooks
|
||||||
|
#
|
||||||
|
# CONFIG_BOARD_INITIALIZE is not set
|
||||||
|
# CONFIG_SCHED_STARTHOOK is not set
|
||||||
|
# CONFIG_SCHED_ATEXIT is not set
|
||||||
|
# CONFIG_SCHED_ONEXIT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Signal Numbers
|
||||||
|
#
|
||||||
|
CONFIG_SIG_SIGUSR1=1
|
||||||
|
CONFIG_SIG_SIGUSR2=2
|
||||||
|
CONFIG_SIG_SIGALARM=3
|
||||||
|
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||||
|
|
||||||
|
#
|
||||||
|
# POSIX Message Queue Options
|
||||||
|
#
|
||||||
|
CONFIG_PREALLOC_MQ_MSGS=4
|
||||||
|
CONFIG_MQ_MAXMSGSIZE=32
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack and heap information
|
||||||
|
#
|
||||||
|
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||||
|
CONFIG_USERMAIN_STACKSIZE=2048
|
||||||
|
CONFIG_PTHREAD_STACK_MIN=256
|
||||||
|
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||||
|
|
||||||
|
#
|
||||||
|
# Device Drivers
|
||||||
|
#
|
||||||
|
CONFIG_DISABLE_POLL=y
|
||||||
|
CONFIG_DEV_NULL=y
|
||||||
|
# CONFIG_DEV_ZERO is not set
|
||||||
|
# CONFIG_LOOP is not set
|
||||||
|
# CONFIG_RAMDISK is not set
|
||||||
|
# CONFIG_CAN is not set
|
||||||
|
# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set
|
||||||
|
# CONFIG_PWM is not set
|
||||||
|
# CONFIG_ARCH_HAVE_I2CRESET is not set
|
||||||
|
# CONFIG_I2C is not set
|
||||||
|
# CONFIG_SPI is not set
|
||||||
|
# CONFIG_I2S is not set
|
||||||
|
# CONFIG_RTC is not set
|
||||||
|
# CONFIG_WATCHDOG is not set
|
||||||
|
# CONFIG_TIMER is not set
|
||||||
|
# CONFIG_ANALOG is not set
|
||||||
|
# CONFIG_AUDIO_DEVICES is not set
|
||||||
|
# CONFIG_VIDEO_DEVICES is not set
|
||||||
|
# CONFIG_BCH is not set
|
||||||
|
# CONFIG_INPUT is not set
|
||||||
|
# CONFIG_LCD is not set
|
||||||
|
# CONFIG_MMCSD is not set
|
||||||
|
# CONFIG_MTD is not set
|
||||||
|
# CONFIG_PIPES is not set
|
||||||
|
# CONFIG_PM is not set
|
||||||
|
# CONFIG_POWER is not set
|
||||||
|
# CONFIG_SENSORS is not set
|
||||||
|
# CONFIG_SERCOMM_CONSOLE is not set
|
||||||
|
CONFIG_SERIAL=y
|
||||||
|
# CONFIG_DEV_LOWCONSOLE is not set
|
||||||
|
# CONFIG_16550_UART is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART0 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART1 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART2 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART3 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART4 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART5 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART6 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART7 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_UART8 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_SCI0 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_SCI1 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART0 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART1 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART2 is not set
|
||||||
|
CONFIG_ARCH_HAVE_USART3=y
|
||||||
|
# CONFIG_ARCH_HAVE_USART4 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART5 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART6 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART7 is not set
|
||||||
|
# CONFIG_ARCH_HAVE_USART8 is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USART Configuration
|
||||||
|
#
|
||||||
|
CONFIG_USART3_ISUART=y
|
||||||
|
CONFIG_MCU_SERIAL=y
|
||||||
|
CONFIG_STANDARD_SERIAL=y
|
||||||
|
CONFIG_USART3_SERIAL_CONSOLE=y
|
||||||
|
# CONFIG_USART4_SERIAL_CONSOLE is not set
|
||||||
|
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# USART3 Configuration
|
||||||
|
#
|
||||||
|
CONFIG_USART3_RXBUFSIZE=256
|
||||||
|
CONFIG_USART3_TXBUFSIZE=256
|
||||||
|
CONFIG_USART3_BAUD=115200
|
||||||
|
CONFIG_USART3_BITS=8
|
||||||
|
CONFIG_USART3_PARITY=0
|
||||||
|
CONFIG_USART3_2STOP=0
|
||||||
|
# CONFIG_USART3_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_USART3_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||||
|
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||||
|
# CONFIG_USBDEV is not set
|
||||||
|
# CONFIG_USBHOST is not set
|
||||||
|
# CONFIG_WIRELESS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging Device Options
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_RAMLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Support
|
||||||
|
#
|
||||||
|
# CONFIG_ARCH_HAVE_NET is not set
|
||||||
|
# CONFIG_ARCH_HAVE_PHY is not set
|
||||||
|
# CONFIG_NET is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# File Systems
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# File system configuration
|
||||||
|
#
|
||||||
|
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||||
|
# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set
|
||||||
|
CONFIG_FS_READABLE=y
|
||||||
|
CONFIG_FS_WRITABLE=y
|
||||||
|
# CONFIG_FS_RAMMAP is not set
|
||||||
|
CONFIG_FS_FAT=y
|
||||||
|
CONFIG_FAT_LCNAMES=y
|
||||||
|
CONFIG_FAT_LFN=y
|
||||||
|
CONFIG_FAT_MAXFNAME=32
|
||||||
|
# CONFIG_FS_FATTIME is not set
|
||||||
|
# CONFIG_FAT_DMAMEMORY is not set
|
||||||
|
# CONFIG_FS_NXFFS is not set
|
||||||
|
# CONFIG_FS_ROMFS is not set
|
||||||
|
# CONFIG_FS_SMARTFS is not set
|
||||||
|
# CONFIG_FS_BINFS is not set
|
||||||
|
# CONFIG_FS_PROCFS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Logging
|
||||||
|
#
|
||||||
|
# CONFIG_SYSLOG_ENABLE is not set
|
||||||
|
# CONFIG_SYSLOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_NX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Memory Management
|
||||||
|
#
|
||||||
|
# CONFIG_MM_MULTIHEAP is not set
|
||||||
|
# CONFIG_MM_SMALL is not set
|
||||||
|
CONFIG_MM_REGIONS=1
|
||||||
|
# CONFIG_ARCH_HAVE_HEAP2 is not set
|
||||||
|
# CONFIG_GRAN is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Audio Support
|
||||||
|
#
|
||||||
|
# CONFIG_AUDIO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Binary Formats
|
||||||
|
#
|
||||||
|
# CONFIG_BINFMT_DISABLE is not set
|
||||||
|
# CONFIG_NXFLAT is not set
|
||||||
|
# CONFIG_ELF is not set
|
||||||
|
CONFIG_BUILTIN=y
|
||||||
|
# CONFIG_PIC is not set
|
||||||
|
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Library Routines
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Standard C Library Options
|
||||||
|
#
|
||||||
|
CONFIG_STDIO_BUFFER_SIZE=64
|
||||||
|
CONFIG_STDIO_LINEBUFFER=y
|
||||||
|
CONFIG_NUNGET_CHARS=2
|
||||||
|
# CONFIG_LIBM is not set
|
||||||
|
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||||
|
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||||
|
CONFIG_LIB_RAND_ORDER=1
|
||||||
|
# CONFIG_EOL_IS_CR is not set
|
||||||
|
# CONFIG_EOL_IS_LF is not set
|
||||||
|
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||||
|
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||||
|
# CONFIG_LIBC_EXECFUNCS is not set
|
||||||
|
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||||
|
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||||
|
# CONFIG_LIBC_STRERROR is not set
|
||||||
|
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||||
|
CONFIG_ARCH_LOWPUTC=y
|
||||||
|
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||||
|
# CONFIG_ARCH_ROMGETC is not set
|
||||||
|
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Non-standard Library Support
|
||||||
|
#
|
||||||
|
# CONFIG_SCHED_WORKQUEUE is not set
|
||||||
|
# CONFIG_LIB_KBDCODEC is not set
|
||||||
|
# CONFIG_LIB_SLCDCODEC is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Basic CXX Support
|
||||||
|
#
|
||||||
|
# CONFIG_C99_BOOL8 is not set
|
||||||
|
CONFIG_HAVE_CXX=y
|
||||||
|
CONFIG_HAVE_CXXINITIALIZE=y
|
||||||
|
# CONFIG_CXX_NEWLONG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# uClibc++ Standard C++ Library
|
||||||
|
#
|
||||||
|
# CONFIG_UCLIBCXX is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Application Configuration
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Built-In Applications
|
||||||
|
#
|
||||||
|
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||||
|
|
||||||
|
#
|
||||||
|
# Examples
|
||||||
|
#
|
||||||
|
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||||
|
# CONFIG_EXAMPLES_CAN is not set
|
||||||
|
# CONFIG_EXAMPLES_CONFIGDATA is not set
|
||||||
|
# CONFIG_EXAMPLES_CPUHOG is not set
|
||||||
|
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_DHCPD is not set
|
||||||
|
# CONFIG_EXAMPLES_ELF is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPC is not set
|
||||||
|
# CONFIG_EXAMPLES_FTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||||
|
# CONFIG_EXAMPLES_JSON is not set
|
||||||
|
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||||
|
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_IGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_MM is not set
|
||||||
|
# CONFIG_EXAMPLES_MODBUS is not set
|
||||||
|
# CONFIG_EXAMPLES_MOUNT is not set
|
||||||
|
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||||
|
CONFIG_EXAMPLES_NSH=y
|
||||||
|
CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||||
|
# CONFIG_EXAMPLES_NULL is not set
|
||||||
|
# CONFIG_EXAMPLES_NX is not set
|
||||||
|
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFFS is not set
|
||||||
|
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||||
|
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||||
|
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||||
|
# CONFIG_EXAMPLES_NXLINES is not set
|
||||||
|
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||||
|
# CONFIG_EXAMPLES_OSTEST is not set
|
||||||
|
# CONFIG_EXAMPLES_PIPE is not set
|
||||||
|
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||||
|
# CONFIG_EXAMPLES_QENCODER is not set
|
||||||
|
# CONFIG_EXAMPLES_RGMP is not set
|
||||||
|
# CONFIG_EXAMPLES_ROMFS is not set
|
||||||
|
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||||
|
# CONFIG_EXAMPLES_SERIALBLASTER is not set
|
||||||
|
# CONFIG_EXAMPLES_SERIALRX is not set
|
||||||
|
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||||
|
# CONFIG_EXAMPLES_SLCD is not set
|
||||||
|
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||||
|
# CONFIG_EXAMPLES_SMART is not set
|
||||||
|
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||||
|
# CONFIG_EXAMPLES_TELNETD is not set
|
||||||
|
# CONFIG_EXAMPLES_THTTPD is not set
|
||||||
|
# CONFIG_EXAMPLES_TIFF is not set
|
||||||
|
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||||
|
# CONFIG_EXAMPLES_UDP is not set
|
||||||
|
# CONFIG_EXAMPLES_UIP is not set
|
||||||
|
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||||
|
# CONFIG_EXAMPLES_USBTERM is not set
|
||||||
|
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Graphics Support
|
||||||
|
#
|
||||||
|
# CONFIG_TIFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Interpreters
|
||||||
|
#
|
||||||
|
# CONFIG_INTERPRETERS_FICL is not set
|
||||||
|
# CONFIG_INTERPRETERS_PCODE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Network Utilities
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Networking Utilities
|
||||||
|
#
|
||||||
|
# CONFIG_NETUTILS_CODECS is not set
|
||||||
|
# CONFIG_NETUTILS_DHCPD is not set
|
||||||
|
# CONFIG_NETUTILS_FTPC is not set
|
||||||
|
# CONFIG_NETUTILS_FTPD is not set
|
||||||
|
# CONFIG_NETUTILS_JSON is not set
|
||||||
|
# CONFIG_NETUTILS_SMTP is not set
|
||||||
|
# CONFIG_NETUTILS_TFTPC is not set
|
||||||
|
# CONFIG_NETUTILS_THTTPD is not set
|
||||||
|
# CONFIG_NETUTILS_UIPLIB is not set
|
||||||
|
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FreeModBus
|
||||||
|
#
|
||||||
|
# CONFIG_MODBUS is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NSH Library
|
||||||
|
#
|
||||||
|
CONFIG_NSH_LIBRARY=y
|
||||||
|
CONFIG_NSH_READLINE=y
|
||||||
|
# CONFIG_NSH_CLE is not set
|
||||||
|
CONFIG_NSH_BUILTIN_APPS=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Disable Individual commands
|
||||||
|
#
|
||||||
|
CONFIG_NSH_DISABLE_ADDROUTE=y
|
||||||
|
CONFIG_NSH_DISABLE_CAT=y
|
||||||
|
CONFIG_NSH_DISABLE_CD=y
|
||||||
|
CONFIG_NSH_DISABLE_CP=y
|
||||||
|
CONFIG_NSH_DISABLE_CMP=y
|
||||||
|
CONFIG_NSH_DISABLE_DD=y
|
||||||
|
CONFIG_NSH_DISABLE_DF=y
|
||||||
|
CONFIG_NSH_DISABLE_DELROUTE=y
|
||||||
|
CONFIG_NSH_DISABLE_ECHO=y
|
||||||
|
CONFIG_NSH_DISABLE_EXEC=y
|
||||||
|
CONFIG_NSH_DISABLE_EXIT=y
|
||||||
|
# CONFIG_NSH_DISABLE_FREE is not set
|
||||||
|
CONFIG_NSH_DISABLE_GET=y
|
||||||
|
# CONFIG_NSH_DISABLE_HELP is not set
|
||||||
|
CONFIG_NSH_DISABLE_HEXDUMP=y
|
||||||
|
CONFIG_NSH_DISABLE_IFCONFIG=y
|
||||||
|
CONFIG_NSH_DISABLE_KILL=y
|
||||||
|
CONFIG_NSH_DISABLE_LOSETUP=y
|
||||||
|
CONFIG_NSH_DISABLE_LS=y
|
||||||
|
# CONFIG_NSH_DISABLE_MB is not set
|
||||||
|
CONFIG_NSH_DISABLE_MKDIR=y
|
||||||
|
CONFIG_NSH_DISABLE_MKFATFS=y
|
||||||
|
CONFIG_NSH_DISABLE_MKFIFO=y
|
||||||
|
CONFIG_NSH_DISABLE_MKRD=y
|
||||||
|
# CONFIG_NSH_DISABLE_MH is not set
|
||||||
|
CONFIG_NSH_DISABLE_MOUNT=y
|
||||||
|
# CONFIG_NSH_DISABLE_MW is not set
|
||||||
|
CONFIG_NSH_DISABLE_PS=y
|
||||||
|
CONFIG_NSH_DISABLE_PUT=y
|
||||||
|
CONFIG_NSH_DISABLE_PWD=y
|
||||||
|
CONFIG_NSH_DISABLE_RM=y
|
||||||
|
CONFIG_NSH_DISABLE_RMDIR=y
|
||||||
|
CONFIG_NSH_DISABLE_SET=y
|
||||||
|
CONFIG_NSH_DISABLE_SH=y
|
||||||
|
CONFIG_NSH_DISABLE_SLEEP=y
|
||||||
|
CONFIG_NSH_DISABLE_TEST=y
|
||||||
|
CONFIG_NSH_DISABLE_UMOUNT=y
|
||||||
|
CONFIG_NSH_DISABLE_UNSET=y
|
||||||
|
CONFIG_NSH_DISABLE_USLEEP=y
|
||||||
|
CONFIG_NSH_DISABLE_WGET=y
|
||||||
|
CONFIG_NSH_DISABLE_XD=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# Configure Command Options
|
||||||
|
#
|
||||||
|
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||||
|
CONFIG_NSH_FILEIOSIZE=512
|
||||||
|
CONFIG_NSH_LINELEN=64
|
||||||
|
# CONFIG_NSH_DISABLE_SEMICOLON is not set
|
||||||
|
# CONFIG_NSH_CMDPARMS is not set
|
||||||
|
CONFIG_NSH_MAXARGUMENTS=6
|
||||||
|
# CONFIG_NSH_ARGCAT is not set
|
||||||
|
CONFIG_NSH_NESTDEPTH=1
|
||||||
|
CONFIG_NSH_DISABLESCRIPT=y
|
||||||
|
CONFIG_NSH_DISABLEBG=y
|
||||||
|
CONFIG_NSH_CONSOLE=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Trace Support
|
||||||
|
#
|
||||||
|
# CONFIG_NSH_ALTCONDEV is not set
|
||||||
|
# CONFIG_NSH_ARCHINIT is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxWidgets/NxWM
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Platform-specific Support
|
||||||
|
#
|
||||||
|
# CONFIG_PLATFORM_CONFIGDATA is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# System Libraries and NSH Add-Ons
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Custom Free Memory Command
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_FREE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# EMACS-like Command Line Editor
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_CLE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Program Installation
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INSTALL is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# FLASH Erase-all Command
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# I2C tool
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# INI File Parser
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_INIFILE is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# NxPlayer media player library / command Line
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_NXPLAYER is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAM test
|
||||||
|
#
|
||||||
|
CONFIG_SYSTEM_RAMTEST=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# readline()
|
||||||
|
#
|
||||||
|
CONFIG_SYSTEM_READLINE=y
|
||||||
|
CONFIG_READLINE_ECHO=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# P-Code Support
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Power Off
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_POWEROFF is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# RAMTRON
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_RAMTRON is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# SD Card
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SDCARD is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Sysinfo
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_SYSINFO is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# VI Work-Alike Editor
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_VI is not set
|
||||||
|
|
||||||
|
#
|
||||||
|
# Stack Monitor
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB CDC/ACM Device Commands
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Composite Device Commands
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Mass Storage Device Commands
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# USB Monitor
|
||||||
|
#
|
||||||
|
|
||||||
|
#
|
||||||
|
# Zmodem Commands
|
||||||
|
#
|
||||||
|
# CONFIG_SYSTEM_ZMODEM is not set
|
||||||
76
configs/sama5d4-ek/ramtest/setenv.sh
Executable file
76
configs/sama5d4-ek/ramtest/setenv.sh
Executable file
@ -0,0 +1,76 @@
|
|||||||
|
#!/bin/bash
|
||||||
|
# configs/sama5d4-ek/ramtest/setenv.sh
|
||||||
|
#
|
||||||
|
# Copyright (C) 2014 Gregory Nutt. All rights reserved.
|
||||||
|
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||||
|
#
|
||||||
|
# Redistribution and use in source and binary forms, with or without
|
||||||
|
# modification, are permitted provided that the following conditions
|
||||||
|
# are met:
|
||||||
|
#
|
||||||
|
# 1. Redistributions of source code must retain the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer.
|
||||||
|
# 2. Redistributions in binary form must reproduce the above copyright
|
||||||
|
# notice, this list of conditions and the following disclaimer in
|
||||||
|
# the documentation and/or other materials provided with the
|
||||||
|
# distribution.
|
||||||
|
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||||
|
# used to endorse or promote products derived from this software
|
||||||
|
# without specific prior written permission.
|
||||||
|
#
|
||||||
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||||
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||||
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||||
|
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||||
|
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||||
|
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||||
|
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||||
|
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||||
|
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||||
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||||
|
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||||
|
# POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
#
|
||||||
|
|
||||||
|
if [ "$_" = "$0" ] ; then
|
||||||
|
echo "You must source this script, not run it!" 1>&2
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
WD=`pwd`
|
||||||
|
if [ ! -x "setenv.sh" ]; then
|
||||||
|
echo "This script must be executed from the top-level NuttX build directory"
|
||||||
|
exit 1
|
||||||
|
fi
|
||||||
|
|
||||||
|
if [ -z "${PATH_ORIG}" ]; then
|
||||||
|
export PATH_ORIG="${PATH}"
|
||||||
|
fi
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||||
|
# toolchain under Windows. You will also have to edit this if you install
|
||||||
|
# this toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the CodeSourcery toolchain in any other location
|
||||||
|
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||||
|
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||||
|
|
||||||
|
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||||
|
# toolchain under windows. You will also have to edit this if you install
|
||||||
|
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||||
|
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||||
|
# at those locations as well.
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||||
|
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||||
|
|
||||||
|
# This is the Cygwin path to the location where I build the buildroot
|
||||||
|
# toolchain.
|
||||||
|
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm/staging_dir/bin"
|
||||||
|
|
||||||
|
# Add the path to the toolchain to the PATH varialble
|
||||||
|
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||||
|
|
||||||
|
echo "PATH : ${PATH}"
|
||||||
Loading…
Reference in New Issue
Block a user