diff --git a/configs/kwikstik-k40/README.txt b/configs/kwikstik-k40/README.txt index e4170de9b8..a49936e650 100644 --- a/configs/kwikstik-k40/README.txt +++ b/configs/kwikstik-k40/README.txt @@ -524,7 +524,22 @@ Where is one of the following: ostest: ------ This configuration directory, performs a simple OS test using - examples/ostest. By default, this project assumes that you are - using the DFU bootloader. + examples/ostest. - CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configuration using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. Default platform/toolchain: + + CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too). + CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc) + CONFIG_ARMV7M_OABI_TOOLCHAIN=y : The older OABI version + CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary diff --git a/configs/kwikstik-k40/ostest/appconfig b/configs/kwikstik-k40/ostest/appconfig deleted file mode 100644 index 9fa43afb8f..0000000000 --- a/configs/kwikstik-k40/ostest/appconfig +++ /dev/null @@ -1,39 +0,0 @@ -############################################################################ -# configs/kwikstik-k40/ostest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/ostest - diff --git a/configs/kwikstik-k40/ostest/defconfig b/configs/kwikstik-k40/ostest/defconfig index 6eca2332ad..7b806d6112 100755 --- a/configs/kwikstik-k40/ostest/defconfig +++ b/configs/kwikstik-k40/ostest/defconfig @@ -1,256 +1,267 @@ -############################################################################ -# configs/kwikstik-k40/ostest/defconfig # -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration # -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection -# -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM4=y -CONFIG_ARCH_CHIP="kinetis" -CONFIG_ARCH_CHIP_MK40X256VLQ100=y -CONFIG_ARCH_BOARD="kwikstik-k40" -CONFIG_ARCH_BOARD_KWIKSTIK_K40=y -CONFIG_BOARD_LOOPSPERMSEC=9535 -CONFIG_DRAM_START=0x1fff8000 -CONFIG_DRAM_SIZE= 0x00010000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_BOOTLOADER=n -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_BUTTONS=n -CONFIG_ARCH_CALIBRATION=n -CONFIG_ARCH_DMA=n +CONFIG_NUTTX_NEWCONFIG=y # -# Identify toolchain and linker options +# Build Setup # -CONFIG_KINETIS_CODESOURCERYW=n -CONFIG_KINETIS_CODESOURCERYL=n -CONFIG_KINETIS_DEVKITARM=n -CONFIG_KINETIS_BUILDROOT=y -CONFIG_KINETIS_DFU=y +# CONFIG_EXPERIMENTAL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set # -# Individual subsystems can be enabled: +# Build Configuration # - -CONFIG_KINETIS_TRACE=n -CONFIG_KINETIS_FLEXBUS=n -CONFIG_KINETIS_UART0=n -CONFIG_KINETIS_UART1=n -CONFIG_KINETIS_UART2=n -CONFIG_KINETIS_UART3=n -CONFIG_KINETIS_UART4=n -CONFIG_KINETIS_UART5=y -CONFIG_KINETIS_ENET=n -CONFIG_KINETIS_RNGB=n -CONFIG_KINETIS_FLEXCAN0=n -CONFIG_KINETIS_FLEXCAN1=n -CONFIG_KINETIS_SPI0=n -CONFIG_KINETIS_SPI1=n -CONFIG_KINETIS_SPI2=n -CONFIG_KINETIS_I2C0=n -CONFIG_KINETIS_I2C1=n -CONFIG_KINETIS_I2S=n -CONFIG_KINETIS_DAC0=n -CONFIG_KINETIS_DAC1=n -CONFIG_KINETIS_ADC0=n -CONFIG_KINETIS_ADC1=n -CONFIG_KINETIS_CMP=n -CONFIG_KINETIS_VREF=n -CONFIG_KINETIS_SDHC=n -CONFIG_KINETIS_FTM0=n -CONFIG_KINETIS_FTM1=n -CONFIG_KINETIS_FTM2=n -CONFIG_KINETIS_LPTIMER=n -CONFIG_KINETIS_RTC=n -CONFIG_KINETIS_SLCD=n -CONFIG_KINETIS_EWM=n -CONFIG_KINETIS_CMT=n -CONFIG_KINETIS_USBOTG=n -CONFIG_KINETIS_USBDCD=n -CONFIG_KINETIS_LLWU=n -CONFIG_KINETIS_TSI=n -CONFIG_KINETIS_FTFL=n -CONFIG_KINETIS_DMA=n -CONFIG_KINETIS_CRC=n -CONFIG_KINETIS_PDB=n -CONFIG_KINETIS_PIT=n -CONFIG_ARMV7M_MPU=n +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set # -# PIN Interrupt Support +# Binary Output Formats # -CONFIG_GPIO_IRQ=n -CONFIG_KINETIS_PORTAINTS=n -CONFIG_KINETIS_PORTBINTS=n -CONFIG_KINETIS_PORTCINTS=n -CONFIG_KINETIS_PORTDINTS=n -CONFIG_KINETIS_PORTEINTS=n - -# -# K40X256VLQ100 specific serial device driver settings -# -CONFIG_UART0_SERIAL_CONSOLE=n -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART2_SERIAL_CONSOLE=n -CONFIG_UART3_SERIAL_CONSOLE=n -CONFIG_UART4_SERIAL_CONSOLE=n -CONFIG_UART5_SERIAL_CONSOLE=y - -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART2_TXBUFSIZE=256 -CONFIG_UART3_TXBUFSIZE=256 -CONFIG_UART4_TXBUFSIZE=256 -CONFIG_UART5_TXBUFSIZE=256 - -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART2_RXBUFSIZE=256 -CONFIG_UART3_RXBUFSIZE=256 -CONFIG_UART4_RXBUFSIZE=256 -CONFIG_UART5_RXBUFSIZE=256 - -CONFIG_UART0_BAUD=115200 -CONFIG_UART1_BAUD=115200 -CONFIG_UART2_BAUD=115200 -CONFIG_UART3_BAUD=115200 -CONFIG_UART4_BAUD=115200 -CONFIG_UART5_BAUD=115200 - -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART2_BITS=8 -CONFIG_UART3_BITS=8 -CONFIG_UART4_BITS=8 -CONFIG_UART5_BITS=8 - -CONFIG_UART0_PARITY=0 -CONFIG_UART2_PARITY=0 -CONFIG_UART3_PARITY=0 -CONFIG_UART4_PARITY=0 -CONFIG_UART5_PARITY=0 - -# -# General build options -# -CONFIG_RRLOAD_BINARY=n +# CONFIG_RRLOAD_BINARY is not set CONFIG_INTELHEX_BINARY=y -CONFIG_MOTOROLA_SREC=n -CONFIG_RAW_BINARY=n +# CONFIG_MOTOROLA_SREC is not set +# CONFIG_RAW_BINARY is not set # -# General OS setup +# Customize Header Files # -CONFIG_USER_ENTRYPOINT="ostest_main" -CONFIG_DEBUG=n -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +# CONFIG_DEBUG_SYMBOLS is not set + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +CONFIG_ARCH_CHIP_KINETIS=y +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAM3U is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +CONFIG_ARCH_CORTEXM4=y +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="kinetis" +# CONFIG_ARMV7M_USEBASEPRI is not set +# CONFIG_ARCH_FPU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARMV7M_MPU is not set + +# +# ARMV7M Configuration Options +# +CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set +CONFIG_ARMV7M_OABI_TOOLCHAIN=y + +# +# Kinetis Configuration Options +# +# CONFIG_ARCH_CHIP_MK40N512VLQ100 is not set +# CONFIG_ARCH_CHIP_MK40N512VMD100 is not set +# CONFIG_ARCH_CHIP_MK40X128VLQ100 is not set +# CONFIG_ARCH_CHIP_MK40X128VMD100 is not set +CONFIG_ARCH_CHIP_MK40X256VLQ100=y +# CONFIG_ARCH_CHIP_MK40X256VMD100 is not set +# CONFIG_ARCH_CHIP_MK60N256VLQ100 is not set +# CONFIG_ARCH_CHIP_MK60N256VMD100 is not set +# CONFIG_ARCH_CHIP_MK60N512VLQ100 is not set +# CONFIG_ARCH_CHIP_MK60N512VMD100 is not set +# CONFIG_ARCH_CHIP_MK60X256VLQ100 is not set +# CONFIG_ARCH_CHIP_MK60X256VMD100 is not set +CONFIG_ARCH_FAMILY_K40=y +# CONFIG_ARCH_FAMILY_K60 is not set + +# +# Kinetis Peripheral Support +# +# CONFIG_KINETIS_TRACE is not set +# CONFIG_KINETIS_FLEXBUS is not set +# CONFIG_KINETIS_UART0 is not set +# CONFIG_KINETIS_UART1 is not set +# CONFIG_KINETIS_UART2 is not set +# CONFIG_KINETIS_UART3 is not set +# CONFIG_KINETIS_UART4 is not set +CONFIG_KINETIS_UART5=y +# CONFIG_KINETIS_FLEXCAN0 is not set +# CONFIG_KINETIS_FLEXCAN1 is not set +# CONFIG_KINETIS_SPI0 is not set +# CONFIG_KINETIS_SPI1 is not set +# CONFIG_KINETIS_SPI2 is not set +# CONFIG_KINETIS_I2C0 is not set +# CONFIG_KINETIS_I2C1 is not set +# CONFIG_KINETIS_I2S is not set +# CONFIG_KINETIS_DAC0 is not set +# CONFIG_KINETIS_DAC1 is not set +# CONFIG_KINETIS_ADC0 is not set +# CONFIG_KINETIS_ADC1 is not set +# CONFIG_KINETIS_CMP is not set +# CONFIG_KINETIS_VREF is not set +# CONFIG_KINETIS_SDHC is not set +# CONFIG_KINETIS_FTM0 is not set +# CONFIG_KINETIS_FTM1 is not set +# CONFIG_KINETIS_FTM2 is not set +# CONFIG_KINETIS_LPTIMER is not set +# CONFIG_KINETIS_RTC is not set +# CONFIG_KINETIS_SLCD is not set +# CONFIG_KINETIS_EWM is not set +# CONFIG_KINETIS_CMT is not set +# CONFIG_KINETIS_USBOTG is not set +# CONFIG_KINETIS_USBDCD is not set +# CONFIG_KINETIS_LLWU is not set +# CONFIG_KINETIS_TSI is not set +# CONFIG_KINETIS_FTFL is not set +# CONFIG_KINETIS_DMA is not set +# CONFIG_KINETIS_CRC is not set +# CONFIG_KINETIS_PDB is not set +# CONFIG_KINETIS_PIT is not set + +# +# Kinetis GPIO Interrupt Configuration +# +# CONFIG_GPIO_IRQ is not set + +# +# Kinetis UART Configuration +# + +# +# External Memory Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +CONFIG_ARCH_HAVE_RAMFUNCS=y +CONFIG_ARCH_RAMFUNCS=y +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=9535 +# CONFIG_ARCH_CALIBRATION is not set +CONFIG_DRAM_START=0x1fff8000 +CONFIG_DRAM_SIZE=65536 +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_KWIKSTIK_K40=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="kwikstik-k40" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +# CONFIG_ARCH_BUTTONS is not set +CONFIG_ARCH_HAVE_IRQBUTTONS=y + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2009 CONFIG_START_MONTH=9 CONFIG_START_DAY=21 -CONFIG_GREGORIAN_TIME=n -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n -CONFIG_SCHED_WORKQUEUE=n -CONFIG_SCHED_WORKPRIORITY=192 -CONFIG_SCHED_WORKPERIOD=50000 -CONFIG_SCHED_WORKSTACKSIZE=1024 -CONFIG_SIG_SIGWORK=17 - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n -CONFIG_DISABLE_PTHREAD=n -CONFIG_DISABLE_SIGNALS=n -CONFIG_DISABLE_MQUEUE=n -CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="ostest_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y # -# Misc libc settings +# Signal Numbers # -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 # # Sizes of configurable things (0 disables) @@ -261,209 +272,312 @@ CONFIG_NPTHREAD_KEYS=4 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_NUNGET_CHARS=2 CONFIG_PREALLOC_MQ_MSGS=4 CONFIG_MQ_MAXMSGSIZE=32 CONFIG_MAX_WDOGPARMS=2 CONFIG_PREALLOC_WDOGS=4 CONFIG_PREALLOC_TIMERS=4 -# -# Filesystem configuration -# -CONFIG_FS_FAT=n -CONFIG_FAT_LCNAMES=n -CONFIG_FAT_LFN=n -CONFIG_FAT_MAXFNAME=32 -CONFIG_FS_NXFFS=n -CONFIG_FS_ROMFS=n - -# -# Maintain legacy build behavior (revisit) -# - -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MMCSD_SDIO=y -CONFIG_MTD=y - -# -# SPI-based MMC/SD driver -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# Block driver buffering -# -CONFIG_FS_READAHEAD=n -CONFIG_FS_WRITEBUFFER=n - -# -# SDIO-based MMC/SD driver -# -CONFIG_SDIO_DMA=n -CONFIG_MMCSD_MMCSUPPORT=n -CONFIG_MMCSD_HAVECARDDETECT=n - -# -# TCP/IP and UDP support via uIP -# -CONFIG_NET=n -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=0 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=n -CONFIG_NET_TCP_CONNS=40 -CONFIG_NET_MAX_LISTENPORTS=40 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=n -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=y -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n - -# -# UIP Network Utilities -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# USB Device Configuration -# -CONFIG_USBDEV=n -CONFIG_USBDEV_ISOCHRONOUS=n -CONFIG_USBDEV_DUALSPEED=n -CONFIG_USBDEV_SELFPOWERED=y -CONFIG_USBDEV_REMOTEWAKEUP=n -CONFIG_USBDEV_MAXPOWER=100 -CONFIG_USBDEV_TRACE=n -CONFIG_USBDEV_TRACE_NRECORDS=128 - -# -# USB Serial Device Configuration -# -CONFIG_PL2303=n -CONFIG_PL2303_EPINTIN=1 -CONFIG_PL2303_EPBULKOUT=2 -CONFIG_PL2303_EPBULKIN=3 -CONFIG_PL2303_NWRREQS=4 -CONFIG_PL2303_NRDREQS=4 -CONFIG_PL2303_VENDORID=0x067b -CONFIG_PL2303_PRODUCTID=0x2303 -CONFIG_PL2303_VENDORSTR="Nuttx" -CONFIG_PL2303_PRODUCTSTR="USBdev Serial" -CONFIG_PL2303_RXBUFSIZE=512 -CONFIG_PL2303_TXBUFSIZE=512 - -# -# USB Storage Device Configuration -# -CONFIG_USBMSC=n -CONFIG_USBMSC_EP0MAXPACKET=64 -CONFIG_USBMSC_EPBULKOUT=2 -CONFIG_USBMSC_EPBULKIN=5 -CONFIG_USBMSC_NRDREQS=2 -CONFIG_USBMSC_NWRREQS=2 -CONFIG_USBMSC_BULKINREQLEN=256 -CONFIG_USBMSC_BULKOUTREQLEN=256 -CONFIG_USBMSC_VENDORID=0x584e -CONFIG_USBMSC_VENDORSTR="NuttX" -CONFIG_USBMSC_PRODUCTID=0x5342 -CONFIG_USBMSC_PRODUCTSTR="USBdev Storage" -CONFIG_USBMSC_VERSIONNO=0x0399 -CONFIG_USBMSC_REMOVABLE=y - -# -# Settings for examples/uip -# -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n - -# -# Settings for examples/nettest -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - -# -# Settings for examples/usbserial -# -CONFIG_EXAMPLES_USBSERIAL_INONLY=n -CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n -CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n -CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n - -CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n -CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n -CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n -CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n -CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n - # # Stack and heap information # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_ARCH_RAMFUNCS=y -CONFIG_CUSTOM_STACK=n CONFIG_IDLETHREAD_STACKSIZE=1024 CONFIG_USERMAIN_STACKSIZE=2048 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_PWM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART5=y +CONFIG_MCU_SERIAL=y +CONFIG_UART5_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART5 Configuration +# +CONFIG_UART5_RXBUFSIZE=256 +CONFIG_UART5_TXBUFSIZE=256 +CONFIG_UART5_BAUD=115200 +CONFIG_UART5_BITS=8 +CONFIG_UART5_PARITY=0 +CONFIG_UART5_2STOP=0 +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_FS_RAMMAP is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_GRAN is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_COMPOSITE is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +CONFIG_EXAMPLES_OSTEST=y +# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set +CONFIG_EXAMPLES_OSTEST_LOOPS=1 +CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 +CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 +CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000 +CONFIG_EXAMPLES_OSTEST_RR_RUNS=10 +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBMSC is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPC is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_RESOLV is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# System NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# diff --git a/configs/kwikstik-k40/ostest/setenv.sh b/configs/kwikstik-k40/ostest/setenv.sh index 3acbddea48..f158b7f7cc 100755 --- a/configs/kwikstik-k40/ostest/setenv.sh +++ b/configs/kwikstik-k40/ostest/setenv.sh @@ -57,5 +57,5 @@ fi export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" # Add the path to the toolchain to the PATH varialble -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" echo "PATH : ${PATH}" diff --git a/configs/lm3s6965-ek/README.txt b/configs/lm3s6965-ek/README.txt index cae3503651..e67b858b09 100644 --- a/configs/lm3s6965-ek/README.txt +++ b/configs/lm3s6965-ek/README.txt @@ -572,6 +572,7 @@ Where is one of the following: CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too). CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc) + CONFIG_ARMV7M_OABI_TOOLCHAIN=y : The older OABI version CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary 3. As it is configured now, you MUST have a network connected. diff --git a/configs/twr-k60n512/README.txt b/configs/twr-k60n512/README.txt index 5fb00a2f94..4ed32411b8 100644 --- a/configs/twr-k60n512/README.txt +++ b/configs/twr-k60n512/README.txt @@ -553,14 +553,14 @@ TWR-K60N512-specific Configuration Options CONFIG_KINETIS_TRACE -- Enable trace clocking on power up. CONFIG_KINETIS_FLEXBUS -- Enable flexbus clocking on power up. - CONFIG_KINETIS_UART0 -- Support UART0 - CONFIG_KINETIS_UART1 -- Support UART1 - CONFIG_KINETIS_UART2 -- Support UART2 - CONFIG_KINETIS_UART3 -- Support UART3 - CONFIG_KINETIS_UART4 -- Support UART4 - CONFIG_KINETIS_UART5 -- Support UART5 - CONFIG_KINETIS_ENET -- Support Ethernet (K60 only) - CONFIG_KINETIS_RNGB -- Support the random number generator(K60 only) + CONFIG_KINETIS_UART0 -- Support UART0 + CONFIG_KINETIS_UART1 -- Support UART1 + CONFIG_KINETIS_UART2 -- Support UART2 + CONFIG_KINETIS_UART3 -- Support UART3 + CONFIG_KINETIS_UART4 -- Support UART4 + CONFIG_KINETIS_UART5 -- Support UART5 + CONFIG_KINETIS_ENET -- Support Ethernet (K60 only) + CONFIG_KINETIS_RNGB -- Support the random number generator(K60 only) CONFIG_KINETIS_FLEXCAN0 -- Support FlexCAN0 CONFIG_KINETIS_FLEXCAN1 -- Support FlexCAN1 CONFIG_KINETIS_SPI0 -- Support SPI0 @@ -569,8 +569,8 @@ TWR-K60N512-specific Configuration Options CONFIG_KINETIS_I2C0 -- Support I2C0 CONFIG_KINETIS_I2C1 -- Support I2C1 CONFIG_KINETIS_I2S -- Support I2S - CONFIG_KINETIS_DAC0 -- Support DAC0 - CONFIG_KINETIS_DAC1 -- Support DAC1 + CONFIG_KINETIS_DAC0 -- Support DAC0 + CONFIG_KINETIS_DAC1 -- Support DAC1 CONFIG_KINETIS_ADC0 -- Support ADC0 CONFIG_KINETIS_ADC1 -- Support ADC1 CONFIG_KINETIS_CMP -- Support CMP @@ -658,8 +658,7 @@ Where is one of the following: ostest: ------ This configuration directory, performs a simple OS test using - examples/ostest. By default, this project assumes that you are - using the DFU bootloader. + examples/ostest. CONFIG_KINETIS_BUILDROOT=y : NuttX buildroot under Linux or Cygwin diff --git a/configs/twr-k60n512/nsh/defconfig b/configs/twr-k60n512/nsh/defconfig index 7040494008..f678f06cd8 100644 --- a/configs/twr-k60n512/nsh/defconfig +++ b/configs/twr-k60n512/nsh/defconfig @@ -53,6 +53,7 @@ CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=n CONFIG_ARCH_CALIBRATION=n CONFIG_ARCH_DMA=n +CONFIG_ARCH_FPU=n # # Identify toolchain and linker options @@ -61,7 +62,6 @@ CONFIG_KINETIS_CODESOURCERYW=n CONFIG_KINETIS_CODESOURCERYL=n CONFIG_KINETIS_DEVKITARM=n CONFIG_KINETIS_BUILDROOT=y -CONFIG_KINETIS_DFU=y # # Individual subsystems can be enabled: @@ -205,6 +205,7 @@ CONFIG_SCHED_WORKPRIORITY=192 CONFIG_SCHED_WORKPERIOD=50000 CONFIG_SCHED_WORKSTACKSIZE=1024 CONFIG_SIG_SIGWORK=17 +CONFIG_SCHED_WAITPID=y # # The following can be used to disable categories of diff --git a/configs/twr-k60n512/nsh/setenv.sh b/configs/twr-k60n512/nsh/setenv.sh index e2725b0c34..f87012126a 100644 --- a/configs/twr-k60n512/nsh/setenv.sh +++ b/configs/twr-k60n512/nsh/setenv.sh @@ -57,5 +57,5 @@ fi export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" # Add the path to the toolchain to the PATH varialble -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" echo "PATH : ${PATH}" diff --git a/configs/twr-k60n512/ostest/defconfig b/configs/twr-k60n512/ostest/defconfig index fecbfd0290..ce99f3fa63 100644 --- a/configs/twr-k60n512/ostest/defconfig +++ b/configs/twr-k60n512/ostest/defconfig @@ -53,6 +53,7 @@ CONFIG_ARCH_LEDS=y CONFIG_ARCH_BUTTONS=n CONFIG_ARCH_CALIBRATION=n CONFIG_ARCH_DMA=n +CONFIG_ARCH_FPU=n # # Identify toolchain and linker options @@ -61,7 +62,6 @@ CONFIG_KINETIS_CODESOURCERYW=n CONFIG_KINETIS_CODESOURCERYL=n CONFIG_KINETIS_DEVKITARM=n CONFIG_KINETIS_BUILDROOT=y -CONFIG_KINETIS_DFU=y # # Individual subsystems can be enabled: diff --git a/configs/twr-k60n512/ostest/setenv.sh b/configs/twr-k60n512/ostest/setenv.sh index c3cc691edb..8daf1ce397 100644 --- a/configs/twr-k60n512/ostest/setenv.sh +++ b/configs/twr-k60n512/ostest/setenv.sh @@ -57,5 +57,5 @@ fi export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin" # Add the path to the toolchain to the PATH varialble -export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" echo "PATH : ${PATH}"