sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add support for the STM32 Tiny development board from Laurent Latil

Browse Source
This commit is contained in:
Gregory Nutt 2013-05-28 14:24:17 -06:00
parent 1df321aed4
commit 680e570cc4
23 changed files with 4055 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
ChangeLog
View File

@ -4822,4 +4822,9 @@
cannot be used reliably with the PIC32 USB. With this change the
configs/sure-pic32mx/usbnsh configuration works great (2013-5-28).
* configs/sure-pic32mx/src/pic32mx_nsh.c: The NSH configurations will
support the USB monitor applications (2013-5-28).
support the USB monitor applications (2013-5-28).
nuttx/arch/arm/include/stm32/chip.h, src/stm32/Kconfig, src/stm32/chip.h,
and src/stm32/chip/stm32f103c_pinmap.h: STM32F103C4 and F103C8 chip
support from Laurent Latil (2013-5-28)
* configs/stm32_tiny: Add support for the STM32 Tiny development board
based on th STM32 F103C8T6 MCU (2013-5-28).

2
arch/arm/src/stm32/Kconfig
View File

@ -443,9 +443,11 @@ config STM32_VALUELINE
config STM32_CONNECTIVITYLINE
bool
default n
config STM32_PERFORMANCELINE
bool
default n
config STM32_HIGHDENSITY
bool

13
configs/Kconfig
View File

@ -494,6 +494,15 @@ config ARCH_BOARD_SKP16C26
uses the GNU m32c toolchain. STATUS: The port is complete but untested
due to issues with compiler internal errors.
config ARCH_BOARD_STM32_TINY
bool "STM32-Tiny board"
depends on ARCH_CHIP_STM32F103C8
select ARCH_HAVE_LEDS
---help---
A configuration for the STM32 Tiny board. This board is based on a
STM32F103C8T6 micro-controller chip, and is (always ?) bundled with
an nRF24L01+ wireless module.
config ARCH_BOARD_STM3210E_EVAL
bool "STMicro STM3210E-EVAL development board"
depends on ARCH_CHIP_STM32F103ZET6
@ -765,6 +774,7 @@ config ARCH_BOARD
default "sam3u-ek" if ARCH_BOARD_SAM3UEK
default "shenzhou" if ARCH_BOARD_SHENZHOU
default "skp16c26" if ARCH_BOARD_SKP16C26
default "stm32_tiny" if ARCH_BOARD_STM32_TINY
default "stm3210e-eval" if ARCH_BOARD_STM3210E_EVAL
default "stm3220g-eval" if ARCH_BOARD_STM3220G_EVAL
default "stm3240g-eval" if ARCH_BOARD_STM3240G_EVAL
@ -988,6 +998,9 @@ endif
if ARCH_BOARD_SKP16C26
source "configs/skp16c26/Kconfig"
endif
if ARCH_BOARD_STM32_TINY
source "configs/stm32_tiny/Kconfig"
endif
if ARCH_BOARD_STM3210E_EVAL
source "configs/stm3210e-eval/Kconfig"
endif

7
configs/stm32_tiny/Kconfig Normal file
View File

@ -0,0 +1,7 @@
#
# For a description of the syntax of this configuration file,
# see misc/tools/kconfig-language.txt.
#
if ARCH_BOARD_STM32_TINY
endif

711
configs/stm32_tiny/README.txt Normal file
View File

@ -0,0 +1,711 @@
README
======
This README discusses issues unique to NuttX configurations for the
STM32 Tiny development board.
This board is available from several vendors on the net, and may
be sold under different names. It is based on a STM32 F103C8T6 MCU, and
is (always ?) bundled with a nRF24L01 wireless communication module.
Contents
========
- Development Environment
- GNU Toolchain Options
- IDEs
- NuttX EABI "buildroot" Toolchain
- NuttX OABI "buildroot" Toolchain
- NXFLAT Toolchain
- LEDs
- PWM
- UARTs
- Timer Inputs/Outputs
- STM32 Tiny -specific Configuration Options
- Configurations
Development Environment
=======================
Either Linux or Cygwin on Windows can be used for the development environment.
The source has been built only using the GNU toolchain (see below). Other
toolchains will likely cause problems.
GNU Toolchain Options
=====================
Toolchain Configurations
------------------------
The NuttX make system has been modified to support the following different
toolchain options.
1. The CodeSourcery GNU toolchain,
2. The Atollic Toolchain,
3. The devkitARM GNU toolchain,
4. Raisonance GNU toolchain, or
5. The NuttX buildroot Toolchain (see below).
All testing has been conducted using the CodeSourcery toolchain for Windows. To use
the Atollic, devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
add one of the following configuration options to your .config (or defconfig)
file:
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux
CONFIG_STM32_ATOLLIC_LITE=y : The free, "Lite" version of Atollic toolchain under Windows
CONFIG_STM32_ATOLLIC_PRO=y : The paid, "Pro" version of Atollic toolchain under Windows
CONFIG_STM32_DEVKITARM=y : devkitARM under Windows
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
If you change the default toolchain, then you may also have to modify the PATH in
the setenv.h file if your make cannot find the tools.
NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
1. The Windows toolchain cannot follow Cygwin paths. Path conversions are
performed automatically in the Cygwin makefiles using the 'cygpath' utility
but you might easily find some new path problems. If so, check out 'cygpath -w'
2. Windows toolchains cannot follow Cygwin symbolic links. Many symbolic links
are used in Nuttx (e.g., include/arch). The make system works around these
problems for the Windows tools by copying directories instead of linking them.
But this can also cause some confusion for you: For example, you may edit
a file in a "linked" directory and find that your changes had no effect.
That is because you are building the copy of the file in the "fake" symbolic
directory. If you use a Windows toolchain, you should get in the habit of
making like this:
make clean_context all
An alias in your .bashrc file might make that less painful.
3. Dependencies are not made when using Windows versions of the GCC. This is
because the dependencies are generated using Windows pathes which do not
work with the Cygwin make.
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
The CodeSourcery Toolchain (2009q1)
-----------------------------------
The CodeSourcery toolchain (2009q1) does not work with default optimization
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
-Os.
The Atollic "Pro" and "Lite" Toolchain
--------------------------------------
One problem that I had with the Atollic toolchains is that the provide a gcc.exe
and g++.exe in the same bin/ file as their ARM binaries. If the Atollic bin/ path
appears in your PATH variable before /usr/bin, then you will get the wrong gcc
when you try to build host executables. This will cause to strange, uninterpretable
errors build some host binaries in tools/ when you first make.
Also, the Atollic toolchains are the only toolchains that have built-in support for
the FPU in these configurations. If you plan to use the Cortex-M4 FPU, you will
need to use the Atollic toolchain for now. See the FPU section below for more
information.
The Atollic "Lite" Toolchain
----------------------------
The free, "Lite" version of the Atollic toolchain does not support C++ nor
does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite"
toolchain, you will have to set:
CONFIG_HAVE_CXX=n
In order to compile successfully. Otherwise, you will get errors like:
"C++ Compiler only available in TrueSTUDIO Professional"
The make may then fail in some of the post link processing because of some of
the other missing tools. The Make.defs file replaces the ar and nm with
the default system x86 tool versions and these seem to work okay. Disable all
of the following to avoid using objcopy:
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=n
CONFIG_MOTOROLA_SREC=n
CONFIG_RAW_BINARY=n
devkitARM
---------
The devkitARM toolchain includes a version of MSYS make. Make sure that the
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
path or will get the wrong version of make.
IDEs
====
NuttX is built using command-line make. It can be used with an IDE, but some
effort will be required to create the project.
Makefile Build
--------------
Under Eclipse, it is pretty easy to set up an "empty makefile project" and
simply use the NuttX makefile to build the system. That is almost for free
under Linux. Under Windows, you will need to set up the "Cygwin GCC" empty
makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
there is a lot of help on the internet).
Native Build
------------
Here are a few tips before you start that effort:
1) Select the toolchain that you will be using in your .config file
2) Start the NuttX build at least one time from the Cygwin command line
before trying to create your project. This is necessary to create
certain auto-generated files and directories that will be needed.
3) Set up include pathes: You will need include/, arch/arm/src/stm32,
arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
4) All assembly files need to have the definition option -D __ASSEMBLY__
on the command line.
Startup files will probably cause you some headaches. The NuttX startup file
is arch/arm/src/stm32/stm32_vectors.S. With RIDE, I have to build NuttX
one time from the Cygwin command line in order to obtain the pre-built
startup object needed by RIDE.
NuttX EABI "buildroot" Toolchain
================================
A GNU GCC-based toolchain is assumed. The files */setenv.sh should
be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
different from the default in your PATH variable).
If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
SourceForge download site (https://sourceforge.net/projects/nuttx/files/buildroot/).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
cd tools
./configure.sh stm32_tiny/<sub-dir>
2. Download the latest buildroot package into <some-dir>
3. unpack the buildroot tarball. The resulting directory may
have versioning information on it like buildroot-x.y.z. If so,
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
4. cd <some-dir>/buildroot
5. cp configs/cortexm3-eabi-defconfig-4.6.3 .config
6. make oldconfig
7. make
8. Edit setenv.h, if necessary, so that the PATH variable includes
the path to the newly built binaries.
See the file configs/README.txt in the buildroot source tree. That has more
details PLUS some special instructions that you will need to follow if you are
building a Cortex-M3 toolchain for Cygwin under Windows.
NOTE: Unfortunately, the 4.6.3 EABI toolchain is not compatible with the
the NXFLAT tools. See the top-level TODO file (under "Binary loaders") for
more information about this problem. If you plan to use NXFLAT, please do not
use the GCC 4.6.3 EABI toochain; instead use the GCC 4.3.3 OABI toolchain.
See instructions below.
NuttX OABI "buildroot" Toolchain
================================
The older, OABI buildroot toolchain is also available. To use the OABI
toolchain:
1. When building the buildroot toolchain, either (1) modify the cortexm3-eabi-defconfig-4.6.3
configuration to use EABI (using 'make menuconfig'), or (2) use an exising OABI
configuration such as cortexm3-defconfig-4.3.3
2. Modify the Make.defs file to use the OABI conventions:
+CROSSDEV = arm-nuttx-elf-
+ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections
-CROSSDEV = arm-nuttx-eabi-
-ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
-NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
NXFLAT Toolchain
================
If you are *not* using the NuttX buildroot toolchain and you want to use
the NXFLAT tools, then you will still have to build a portion of the buildroot
tools -- just the NXFLAT tools. The buildroot with the NXFLAT tools can
be downloaded from the NuttX SourceForge download site
(https://sourceforge.net/projects/nuttx/files/).
This GNU toolchain builds and executes in the Linux or Cygwin environment.
1. You must have already configured Nuttx in <some-dir>/nuttx.
cd tools
./configure.sh lpcxpresso-lpc1768/<sub-dir>
2. Download the latest buildroot package into <some-dir>
3. unpack the buildroot tarball. The resulting directory may
have versioning information on it like buildroot-x.y.z. If so,
rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
4. cd <some-dir>/buildroot
5. cp configs/cortexm3-defconfig-nxflat .config
6. make oldconfig
7. make
8. Edit setenv.h, if necessary, so that the PATH variable includes
the path to the newly builtNXFLAT binaries.
LEDs
====
The STM32Tiny board has only one software controllable LED.
This LED can be used by the board port when CONFIG_ARCH_LEDS option is
enabled.
If enabled the LED is simply turned on when the board boots
succesfully, and is blinking on panic / assertion failed.
PWM
===
The STM32 Tiny has no real on-board PWM devices, but the board can be
configured to output a pulse train using TIM3 CH2 on the GPIO line B.5
(connected to the LED).
Please note that the CONFIG_STM32_TIM3_PARTIAL_REMAP option must be enabled
in this case.
UARTs
=====
UART/USART PINS
---------------
USART1
RX PA10
TX PA9
USART2
CK PA4
CTS PA0*
RTS PA1
RX PA3
TX PA2
USART3
CK PB12*
CTS PB13*
RTS PB14*
RX PB11
TX PB10
* theses IO lines are intended to be used by the wireless module on the board.
Default USART/UART Configuration
--------------------------------
USART1 (RX & TX only) is available through the RS-232 port on the board. A MAX232 chip converts
voltage to RS-232 level. This serial port can be used to flash a firmware using the boot loader
integrated in the MCU.
Timer Inputs/Outputs
====================
TIM1
CH1 PA8
CH2 PA9*
CH3 PA10*
CH4 PA11*
TIM2
CH1 PA0*, PA15, PA5
CH2 PA1, PB3
CH3 PA2, PB10*
CH4 PA3, PB11
TIM3
CH1 PA6, PB4
CH2 PA7, PB5*
CH3 PB0
CH4 PB1*
TIM4
CH1 PB6*
CH2 PB7
CH3 PB8
CH4 PB9*
* Indicates pins that have other on-board functions and should be used only
with care (See board datasheet).
STM32 Tiny - specific Configuration Options
===============================================
CONFIG_ARCH - Identifies the arch/ subdirectory. This should
be set to:
CONFIG_ARCH=arm
CONFIG_ARCH_family - For use in C code:
CONFIG_ARCH_ARM=y
CONFIG_ARCH_architecture - For use in C code:
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
CONFIG_ARCH_CHIP=stm32
CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
chip:
CONFIG_ARCH_CHIP_STM32F103C8=y
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
configuration features.
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=n
CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
hence, the board that supports the particular chip or SoC.
CONFIG_ARCH_BOARD=stm32_tiny
CONFIG_ARCH_BOARD_name - For use in C code
CONFIG_ARCH_BOARD_STM32_TINY=y
CONFIG_ARCH_LOOPSPERMSEC - Must be calibrated for correct operation
of delay loops
CONFIG_ENDIAN_BIG - define if big endian (default is little
endian)
CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
CONFIG_DRAM_SIZE=20480 (20Kb)
CONFIG_DRAM_START - The start address of installed DRAM
CONFIG_DRAM_START=0x20000000
CONFIG_ARCH_IRQPRIO - The STM32Tiny supports interrupt prioritization
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
have LEDs
CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
stack. If defined, this symbol is the size of the interrupt
stack in bytes. If not defined, the user task stacks will be
used during interrupt handling.
CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
cause a 100 second delay during boot-up. This 100 second delay
serves no purpose other than it allows you to calibratre
CONFIG_ARCH_LOOPSPERMSEC. You simply use a stop watch to measure
the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
the delay actually is 100 seconds.
Individual subsystems can be enabled:
AHB
---
CONFIG_STM32_CRC
CONFIG_STM32_BKPSRAM
APB1
----
CONFIG_STM32_TIM2
CONFIG_STM32_TIM3
CONFIG_STM32_TIM4
CONFIG_STM32_WWDG
CONFIG_STM32_IWDG
CONFIG_STM32_SPI2
CONFIG_STM32_USART2
CONFIG_STM32_USART3
CONFIG_STM32_I2C1
CONFIG_STM32_I2C2
CONFIG_STM32_CAN1
CONFIG_STM32_PWR -- Required for RTC
APB2
----
CONFIG_STM32_TIM1
CONFIG_STM32_USART1
CONFIG_STM32_ADC1
CONFIG_STM32_ADC2
CONFIG_STM32_SPI1
Timer devices may be used for different purposes. One special purpose is
to generate modulated outputs for such things as motor control. If CONFIG_STM32_TIMn
is defined (as above) then the following may also be defined to indicate that
the timer is intended to be used for pulsed output modulation or ADC conversion.
Note that ADC require two definitions: Not only do you have
to assign the timer (n) for used by the ADC, but then you also have to
configure which ADC (m) it is assigned to.
CONFIG_STM32_TIMn_PWM Reserve timer n for use by PWM, n=1,..,14
CONFIG_STM32_TIMn_ADC Reserve timer n for use by ADC, n=1,..,14
CONFIG_STM32_TIMn_ADCm Reserve timer n to trigger ADCm, n=1,..,14, m=1,..,3
For each timer that is enabled for PWM usage, we need the following additional
configuration settings:
CONFIG_STM32_TIMx_CHANNEL - Specifies the timer output channel {1,..,4}
NOTE: The STM32 timers are each capable of generating different signals on
each of the four channels with different duty cycles. That capability is
not supported by this driver: Only one output channel per timer.
JTAG Enable settings (by default only SW-DP is enabled):
CONFIG_STM32_JTAG_FULL_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
CONFIG_STM32_JTAG_NOJNTRST_ENABLE - Enables full SWJ (JTAG-DP + SW-DP)
but without JNTRST.
CONFIG_STM32_JTAG_SW_ENABLE - Set JTAG-DP disabled and SW-DP enabled
STM32Tiny specific device driver settings
CONFIG_U[S]ARTn_SERIAL_CONSOLE - selects the USARTn (n=1,2,3)
for the console and ttys0 (default is the USART1).
CONFIG_U[S]ARTn_RXBUFSIZE - Characters are buffered as received.
This specific the size of the receive buffer
CONFIG_U[S]ARTn_TXBUFSIZE - Characters are buffered before
being sent. This specific the size of the transmit buffer
CONFIG_U[S]ARTn_BAUD - The configure BAUD of the UART. Must be
CONFIG_U[S]ARTn_BITS - The number of bits. Must be either 7 or 8.
CONFIG_U[S]ARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
CONFIG_U[S]ARTn_2STOP - Two stop bits
STM32Tiny CAN Configuration
CONFIG_CAN - Enables CAN support (one or both of CONFIG_STM32_CAN1 or
CONFIG_STM32_CAN2 must also be defined)
CONFIG_CAN_EXTID - Enables support for the 29-bit extended ID. Default
Standard 11-bit IDs.
CONFIG_CAN_FIFOSIZE - The size of the circular buffer of CAN messages.
Default: 8
CONFIG_CAN_NPENDINGRTR - The size of the list of pending RTR requests.
Default: 4
CONFIG_CAN_LOOPBACK - A CAN driver may or may not support a loopback
mode for testing. The STM32 CAN driver does support loopback mode.
CONFIG_CAN1_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN1 is defined.
CONFIG_CAN2_BAUD - CAN1 BAUD rate. Required if CONFIG_STM32_CAN2 is defined.
CONFIG_CAN_TSEG1 - The number of CAN time quanta in segment 1. Default: 6
CONFIG_CAN_TSEG2 - the number of CAN time quanta in segment 2. Default: 7
CONFIG_CAN_REGDEBUG - If CONFIG_DEBUG is set, this will generate an
dump of all CAN registers.
STM32Tiny SPI Configuration
CONFIG_STM32_SPI_INTERRUPTS - Select to enable interrupt driven SPI
support. Non-interrupt-driven, poll-waiting is recommended if the
interrupt rate would be to high in the interrupt driven case.
CONFIG_STM32_SPI_DMA - Use DMA to improve SPI transfer performance.
Cannot be used with CONFIG_STM32_SPI_INTERRUPT.
Configurations
==============
Each STM32Tiny configuration is maintained in a sub-directory and
can be selected as follow:
cd tools
./configure.sh STM32Tiny/<subdir>
cd -
. ./setenv.sh
If this is a Windows native build, then configure.bat should be used
instead of configure.sh:
configure.bat STM32Tiny\<subdir>
Where <subdir> is one of the following:
nsh:
---
Configures the NuttShell (nsh) located at apps/examples/nsh. This
configuration enables a console on UART1. Support for
builtin applications is enabled, but in the base configuration no
builtin applications are selected (see NOTES below).
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. By default, this configuration uses the CodeSourcery toolchain
for Windows and builds under Cygwin (or probably MSYS). That
can easily be reconfigured, of course.
CONFIG_HOST_WINDOWS=y : Builds under Windows
CONFIG_WINDOWS_CYGWIN=y : Using Cygwin
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
3. This example supports the PWM test (apps/examples/pwm) but this must
be manually enabled by selecting:
CONFIG_PWM=y : Enable the generic PWM infrastructure
CONFIG_STM32_TIM3=y : Enable TIM3
CONFIG_STM32_TIM3_PWM=y : Use TIM3 to generate PWM output
CONFIG_STM32_TIM3_PARTIAL_REMAP=y : Required to have the port B5 as timer PWM output (channel 2)
CONFIG_STM32_TIM3_CHANNEL=2
See also apps/examples/README.txt
Note that the only supported board configuration uses the board LED as PWM output.
Special PWM-only debug options:
CONFIG_DEBUG_PWM
7. USB Support (CDC/ACM device)
CONFIG_STM32_OTGFS=y : STM32 OTG FS support
CONFIG_USBDEV=y : USB device support must be enabled
CONFIG_CDCACM=y : The CDC/ACM driver must be built
CONFIG_NSH_BUILTIN_APPS=y : NSH built-in application support must be enabled
CONFIG_NSH_ARCHINIT=y : To perform USB initialization
8. Using the USB console.
The STM32Tiny NSH configuration can be set up to use a USB CDC/ACM
(or PL2303) USB console. The normal way that you would configure the
the USB console would be to change the .config file like this:
CONFIG_STM32_OTGFS=y : STM32 OTG FS support
CONFIG_USART2_SERIAL_CONSOLE=n : Disable the USART2 console
CONFIG_DEV_CONSOLE=n : Inhibit use of /dev/console by other logic
CONFIG_USBDEV=y : USB device support must be enabled
CONFIG_CDCACM=y : The CDC/ACM driver must be built
CONFIG_CDCACM_CONSOLE=y : Enable the CDC/ACM USB console.
NOTE: When you first start the USB console, you have hit ENTER a few
times before NSH starts. The logic does this to prevent sending USB data
before there is anything on the host side listening for USB serial input.
9. Here is an alternative USB console configuration. The following
configuration will also create a NSH USB console but this version
will use /dev/console. Instead, it will use the normal /dev/ttyACM0
USB serial device for the console:
CONFIG_STM32_OTGFS=y : STM32 OTG FS support
CONFIG_USART2_SERIAL_CONSOLE=y : Keep the USART2 console
CONFIG_DEV_CONSOLE=y : /dev/console exists (but NSH won't use it)
CONFIG_USBDEV=y : USB device support must be enabled
CONFIG_CDCACM=y : The CDC/ACM driver must be built
CONFIG_CDCACM_CONSOLE=n : Don't use the CDC/ACM USB console.
CONFIG_NSH_USBCONSOLE=y : Instead use some other USB device for the console
The particular USB device that is used is:
CONFIG_NSH_USBCONDEV="/dev/ttyACM0"
The advantage of this configuration is only that it is easier to
bet working. This alternative does has some side effects:
- When any other device other than /dev/console is used for a user
interface, linefeeds (\n) will not be expanded to carriage return /
linefeeds (\r\n). You will need to set your terminal program to account
for this.
- /dev/console still exists and still refers to the serial port. So
you can still use certain kinds of debug output (see include/debug.h, all
of the interfaces based on lowsyslog will work in this configuration).
- But don't enable USB debug output! Since USB is console is used for
USB debug output and you are using a USB console, there will be
infinite loops and deadlocks: Debug output generates USB debug
output which generatates USB debug output, etc. If you want USB
debug output, you should consider enabling USB trace
(CONFIG_USBDEV_TRACE) and perhaps the USB monitor (CONFIG_SYSTEM_USBMONITOR).
See the usbnsh configuration below for more information on configuring
USB trace output and the USB monitor.
usbnsh:
-------
This is another NSH example. If differs from other 'nsh' configurations
in that this configurations uses a USB serial device for console I/O.
NOTES:
1. This configuration uses the mconf-based configuration tool. To
change this configuration using that tool, you should:
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
and misc/tools/
b. Execute 'make menuconfig' in nuttx/ in order to start the
reconfiguration process.
2. By default, this configuration uses the CodeSourcery toolchain
for Windows and builds under Cygwin (or probably MSYS). That
can easily be reconfigured, of course.
CONFIG_HOST_WINDOWS=y : Builds under Windows
CONFIG_WINDOWS_CYGWIN=y : Using Cygwin
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
3. This configuration does have UART2 output enabled and set up as
the system logging device:
CONFIG_SYSLOG=y : Enable output to syslog, not console
CONFIG_SYSLOG_CHAR=y : Use a character device for system logging
CONFIG_SYSLOG_DEVPATH="/dev/ttyS0" : UART2 will be /dev/ttyS0
However, there is nothing to generate SYLOG output in the default
configuration so nothing should appear on UART2 unless you enable
some debug output or enable the USB monitor.
4. Enabling USB monitor SYSLOG output. If tracing is enabled, the USB
device will save encoded trace output in in-memory buffer; if the
USB monitor is enabled, that trace buffer will be periodically
emptied and dumped to the system loggin device (UART2 in this
configuraion):
CONFIG_USBDEV_TRACE=y : Enable USB trace feature
CONFIG_USBDEV_TRACE_NRECORDS=128 : Buffer 128 records in memory
CONFIG_NSH_USBDEV_TRACE=n : No builtin tracing from NSH
CONFIG_NSH_ARCHINIT=y : Automatically start the USB monitor
CONFIG_SYSTEM_USBMONITOR=y : Enable the USB monitor daemon
CONFIG_SYSTEM_USBMONITOR_STACKSIZE=2048 : USB monitor daemon stack size
CONFIG_SYSTEM_USBMONITOR_PRIORITY=50 : USB monitor daemon priority
CONFIG_SYSTEM_USBMONITOR_INTERVAL=2 : Dump trace data every 2 seconds
CONFIG_SYSTEM_USBMONITOR_TRACEINIT=y : Enable TRACE output
CONFIG_SYSTEM_USBMONITOR_TRACECLASS=y
CONFIG_SYSTEM_USBMONITOR_TRACETRANSFERS=y
CONFIG_SYSTEM_USBMONITOR_TRACECONTROLLER=y
CONFIG_SYSTEM_USBMONITOR_TRACEINTERRUPTS=y
5. By default, this project assumes that you are *NOT* using the DFU
bootloader.
Using the Prolifics PL2303 Emulation
------------------------------------
You could also use the non-standard PL2303 serial device instead of
the standard CDC/ACM serial device by changing:
CONFIG_CDCACM=y : Disable the CDC/ACM serial device class
CONFIG_CDCACM_CONSOLE=y : The CDC/ACM serial device is NOT the console
CONFIG_PL2303=y : The Prolifics PL2303 emulation is enabled
CONFIG_PL2303_CONSOLE=y : The PL2303 serial device is the console

194
configs/stm32_tiny/include/board.h Normal file
View File

@ -0,0 +1,194 @@
/************************************************************************************
* configs/stm32_tiny/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Authors: Gregory Nutt <gnutt@nuttx.org>
* Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#ifndef __ASSEMBLY__
# include <stdint.h>
#endif
#include "stm32_rcc.h"
#include "stm32_sdio.h"
#include "stm32.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* On-board crystal frequency is 8MHz (HSE) */
#define STM32_BOARD_XTAL 8000000ul
/* PLL source is HSE/1, PLL multipler is 9: PLL frequency is 8MHz (XTAL) x 9 = 72MHz */
#define STM32_CFGR_PLLSRC RCC_CFGR_PLLSRC
#define STM32_CFGR_PLLXTPRE 0
#define STM32_CFGR_PLLMUL RCC_CFGR_PLLMUL_CLKx9
#define STM32_PLL_FREQUENCY (9*STM32_BOARD_XTAL)
/* Use the PLL and set the SYSCLK source to be the PLL */
#define STM32_SYSCLK_SW RCC_CFGR_SW_PLL
#define STM32_SYSCLK_SWS RCC_CFGR_SWS_PLL
#define STM32_SYSCLK_FREQUENCY STM32_PLL_FREQUENCY
/* AHB clock (HCLK) is SYSCLK (72MHz) */
#define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK
#define STM32_HCLK_FREQUENCY STM32_PLL_FREQUENCY
#define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */
/* APB2 clock (PCLK2) is HCLK (72MHz) */
#define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLK
#define STM32_PCLK2_FREQUENCY STM32_HCLK_FREQUENCY
/* APB2 timers 1 and 8 will receive PCLK2. */
#define STM32_APB2_TIM1_CLKIN (STM32_PCLK2_FREQUENCY)
#define STM32_APB2_TIM8_CLKIN (STM32_PCLK2_FREQUENCY)
/* APB1 clock (PCLK1) is HCLK/2 (36MHz) */
#define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd2
#define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/2)
/* APB1 timers 2-4 will be twice PCLK1 (I presume the remaining will receive PCLK1) */
#define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM4_CLKIN (2*STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM5_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM6_CLKIN (STM32_PCLK1_FREQUENCY)
#define STM32_APB1_TIM7_CLKIN (STM32_PCLK1_FREQUENCY)
/* USB divider -- Divide PLL clock by 1.5 */
#define STM32_CFGR_USBPRE 0
/* Timer Frequencies, if APBx is set to 1, frequency is same to APBx
* otherwise frequency is 2xAPBx.
* Note: TIM1,8 are on APB2, others on APB1 */
#define STM32_TIM18_FREQUENCY STM32_HCLK_FREQUENCY
#define STM32_TIM27_FREQUENCY STM32_HCLK_FREQUENCY
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
* in order to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode. These values have not been
* tuned!!!
*
* HCLK=72MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(178+2)=400 KHz
*/
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
#endif
/* LED definitions ******************************************************************/
/* The board has only one controllable LED */
#define LED_STARTED 0 /* No LEDs */
#define LED_HEAPALLOCATE 1 /* LED1 on */
#define LED_IRQSENABLED 2 /* LED2 on */
#define LED_STACKCREATED 3 /* LED1 on */
#define LED_INIRQ 4 /* LED1 off */
#define LED_SIGNAL 5 /* LED2 on */
#define LED_ASSERTION 6 /* LED1 + LED2 */
#define LED_PANIC 7 /* LED1 / LED2 blinking */
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void stm32_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

111
configs/stm32_tiny/nsh/Make.defs Normal file
View File

@ -0,0 +1,111 @@
############################################################################
# configs/stm32_tiny/nsh/Make.defs
#
# Copyright (C) 2011, 2012-2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g -Os
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

694
configs/stm32_tiny/nsh/defconfig Normal file
View File

@ -0,0 +1,694 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
# CONFIG_SERIAL_TERMIOS is not set
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
CONFIG_ARCH_CHIP_STM32F103C8=y
# CONFIG_ARCH_CHIP_STM32F103C4 is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
# CONFIG_ARCH_CHIP_STM32F407VG is not set
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
CONFIG_STM32_STM32F10XX=y
CONFIG_STM32_PERFORMANCELINE=y
CONFIG_STM32_MEDIUMDENSITY=y
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
# CONFIG_STM32_ADC1 is not set
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
# CONFIG_STM32_BKP is not set
# CONFIG_STM32_CAN1 is not set
# CONFIG_STM32_CRC is not set
# CONFIG_STM32_DMA1 is not set
# CONFIG_STM32_DMA2 is not set
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_I2C1 is not set
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_IWDG is not set
# CONFIG_STM32_PWR is not set
# CONFIG_STM32_SDIO is not set
# CONFIG_STM32_SPI1 is not set
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
# CONFIG_STM32_TIM3 is not set
# CONFIG_STM32_TIM4 is not set
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
CONFIG_STM32_USART1=y
# CONFIG_STM32_USART2 is not set
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
# CONFIG_STM32_USB is not set
# CONFIG_STM32_WWDG is not set
#
# Alternate Pin Mapping
#
# CONFIG_STM32_TIM3_NO_REMAP is not set
# CONFIG_STM32_TIM3_FULL_REMAP is not set
# CONFIG_STM32_TIM3_PARTIAL_REMAP is not set
# CONFIG_STM32_USART1_REMAP is not set
# CONFIG_STM32_JTAG_DISABLE is not set
CONFIG_STM32_JTAG_FULL_ENABLE=y
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
# CONFIG_STM32_JTAG_SW_ENABLE is not set
# CONFIG_STM32_FORCEPOWER is not set
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
CONFIG_STM32_USART=y
#
# U[S]ART Configuration
#
# CONFIG_USART1_RS485 is not set
# CONFIG_STM32_USART_SINGLEWIRE is not set
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=5483
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=20480
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_STM32_TINY=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="stm32_tiny"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2011
CONFIG_START_MONTH=7
CONFIG_START_DAY=5
CONFIG_DEV_CONSOLE=y
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
CONFIG_DISABLE_OS_API=y
# CONFIG_DISABLE_CLOCK is not set
# CONFIG_DISABLE_POSIX_TIMERS is not set
# CONFIG_DISABLE_PTHREAD is not set
# CONFIG_DISABLE_SIGNALS is not set
# CONFIG_DISABLE_MQUEUE is not set
# CONFIG_DISABLE_ENVIRON is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
CONFIG_ARCH_HAVE_I2CRESET=y
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_USART1=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_USART1_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# USART1 Configuration
#
CONFIG_USART1_RXBUFSIZE=256
CONFIG_USART1_TXBUFSIZE=256
CONFIG_USART1_BAUD=115200
CONFIG_USART1_BITS=8
CONFIG_USART1_PARITY=0
CONFIG_USART1_2STOP=0
# CONFIG_USBDEV is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_FAT is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=1
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
CONFIG_SYMTAB_ORDEREDBYNAME=y
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
CONFIG_NSH_BUILTIN_APPS=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
CONFIG_NSH_DISABLE_IFCONFIG=y
# CONFIG_NSH_DISABLE_KILL is not set
CONFIG_NSH_DISABLE_LOSETUP=y
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MKFIFO is not set
# CONFIG_NSH_DISABLE_MKRD is not set
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=1024
CONFIG_NSH_LINELEN=80
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
CONFIG_NSH_DISABLEBG=y
CONFIG_NSH_CONSOLE=y
#
# USB Trace Support
#
# CONFIG_NSH_CONDEV is not set
# CONFIG_NSH_ARCHINIT is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# RAM Test
#
# CONFIG_SYSTEM_RAMTEST is not set
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# USB Monitor
#

47
configs/stm32_tiny/nsh/setenv.sh Executable file
View File

@ -0,0 +1,47 @@
#!/bin/bash
# configs/stm32_tiny/nsh/setenv.sh
#
# Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

119
configs/stm32_tiny/scripts/ld.script Normal file
View File

@ -0,0 +1,119 @@
/****************************************************************************
* configs/stm32_tiny/scripts/ld.script
*
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The STM32F103C8T6 has 64Kb of FLASH beginning at address 0x0800:0000 and
* 20Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
* begin execution by jumping to the entry point in the 0x0800:0000 address
* range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x08000000, LENGTH = 64K
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 20K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
.init_section : {
_sinit = ABSOLUTE(.);
*(.init_array .init_array.*)
_einit = ABSOLUTE(.);
} > flash
.ARM.extab : {
*(.ARM.extab*)
} > flash
__exidx_start = ABSOLUTE(.);
.ARM.exidx : {
*(.ARM.exidx*)
} > flash
__exidx_end = ABSOLUTE(.);
_eronly = ABSOLUTE(.);
/* The STM32F103C8T6 has 20Kb of SRAM beginning at the following address */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.bss : {
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

101
configs/stm32_tiny/src/Makefile Normal file
View File

@ -0,0 +1,101 @@
############################################################################
# configs/stm32_tiny/src/Makefile
#
# Copyright (C) 2009-2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
# Laurent Latil <laurent@latil.nom.fr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_boot.c up_leds.c up_spi.c up_usbdev.c
ifeq ($(CONFIG_PWM),y)
CSRCS += up_pwm.c
endif
ifeq ($(CONFIG_WL_NRF24L01),y)
CSRCS += up_wireless.c
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
endif
ifeq ($(CONFIG_WATCHDOG),y)
CSRCS += up_watchdog.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
endif
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
$(call ARCHIVE, $@, $(OBJS))
.depend: Makefile $(SRCS)
$(Q) $(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
$(Q) touch $@
depend: .depend
clean:
$(call DELFILE, libboard$(LIBEXT))
$(call CLEAN)
distclean: clean
$(call DELFILE, Make.dep)
$(call DELFILE, .depend)
-include Make.dep

148
configs/stm32_tiny/src/stm32_tiny-internal.h Normal file
View File

@ -0,0 +1,148 @@
/************************************************************************************
* configs/stm32_tiny/src/stm32_tiny-internal.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __CONFIGS_STM32_TINY_INTERNAL_H
#define __CONFIGS_STM32_TINY_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
* modules (others may support more -- in such case, the following must be
* expanded).
*/
#if STM32_NSPI < 1
# undef CONFIG_STM32_SPI1
# undef CONFIG_STM32_SPI2
#elif STM32_NSPI < 2
# undef CONFIG_STM32_SPI2
#endif
/* GPIOs **************************************************************/
/* LEDs */
#define GPIO_LED (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN5)
/* USB Soft Connect Pullup: PC.13 */
#define GPIO_USB_PULLUP (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTC|GPIO_PIN13)
/* NRF24L01 chip select: PB.12 */
#define GPIO_NRF24L01_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_SET|GPIO_PORTB|GPIO_PIN12)
/* NRF24L01 chip enable: PB.1 */
#define GPIO_NRF24L01_CE (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|\
GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN1)
/* NRF24L01 IRQ line: PA.0 */
#define GPIO_NRF24L01_IRQ (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_PORTA|GPIO_PIN0)
/* PWM
*
* Let's use the LED. It is connected to PB.5, which can be used as PWM output of channel 2 of timer 3
* (STM32_TIM3_PARTIAL_REMAP must be enabled)
*/
#ifdef CONFIG_PWM
# if defined(CONFIG_STM32_TIM3_PWM) && defined(CONFIG_STM32_TIM3_PARTIAL_REMAP) && CONFIG_STM32_TIM3_CHANNEL == 2
# define STM32TINY_PWMTIMER 3
# else
# error To use the PWM device, the timer 3 partial remap must be enabled, and the PWM device must be configured on timer 3 / channel 2
# endif
#endif
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public data
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the Hy-Mini STM32v board.
*
************************************************************************************/
extern void stm32_spiinitialize(void);
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the Hy-Mini STM32v board.
*
************************************************************************************/
extern void stm32_usbinitialize(void);
/************************************************************************************
* Name: up_wlinitialize
*
* Description:
* Called to configure wireless module (nRF24L01).
*
************************************************************************************/
extern void up_wlinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_HYMINI_STM32V_INTERNAL_H */

97
configs/stm32_tiny/src/up_boot.c Normal file
View File

@ -0,0 +1,97 @@
/************************************************************************************
* configs/stm32_tiny/src/up_boot.c
*
* Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/spi.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "stm32_tiny-internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Data
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_boardinitialize
*
* Description:
* All STM32 architectures must provide the following entry point. This entry point
* is called early in the initialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void stm32_boardinitialize(void)
{
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
up_ledinit();
#endif
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* stm32_spiinitialize() has been brought into the link.
*/
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
stm32_spiinitialize();
#endif
/* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
* disabled, and 3) the weak function stm32_usbinitialize() has been brought
* into the build.
*/
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
stm32_usbinitialize();
#endif
}

135
configs/stm32_tiny/src/up_leds.c Normal file
View File

@ -0,0 +1,135 @@
/****************************************************************************
* configs/stm32_tiny/src/up_leds.c
*
* Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "stm32.h"
#include "stm32_tiny-internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/* CONFIG_DEBUG_LEDS enables debug output from this file (needs CONFIG_DEBUG
* with CONFIG_DEBUG_VERBOSE too)
*/
#ifdef CONFIG_DEBUG_LEDS
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
static inline void set_led(bool v)
{
ledvdbg("Turn LED %s\n", v? "on":"off");
stm32_gpiowrite(GPIO_LED, v);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void up_ledinit(void)
{
/* Configure LED GPIO for output */
stm32_configgpio(GPIO_LED);
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
ledvdbg("up_ledon(%d)\n",led);
switch (led)
{
case LED_STARTED:
case LED_HEAPALLOCATE:
/* As the board provides only one soft controllable LED, we simply turn it on when the board boots */
set_led(true);
break;
case LED_PANIC:
/* For panic state, the LED is blinking */
set_led(true);
break;
}
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
switch (led)
{
case LED_PANIC:
/* For panic state, the LED is blinking */
set_led(false);
break;
}
}
#endif /* CONFIG_ARCH_LEDS */

90
configs/stm32_tiny/src/up_nsh.c Normal file
View File

@ -0,0 +1,90 @@
/****************************************************************************
* config/stm32_tiny/src/up_nsh.c
*
* Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include "stm32.h"
#include "stm32_tiny-internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
#if defined(CONFIG_WL_NRF24L01)
message("Register the nRF24L01 module");
up_wlinitialize();
#endif
return OK;
}

117
configs/stm32_tiny/src/up_pwm.c Normal file
View File

@ -0,0 +1,117 @@
/************************************************************************************
* configs/stm32_tiny/src/up_pwm.c
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/pwm.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "stm32_pwm.h"
#include "stm32_tiny-internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Configuration *******************************************************************/
/* PWM
*
* The STM32 Tiny board provides a LED on GPIO line B5.
*/
#ifdef CONFIG_PWM
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: pwm_devinit
*
* Description:
* All STM32 architectures must provide the following interface to work with
* examples/pwm.
*
************************************************************************************/
int pwm_devinit(void)
{
static bool initialized = false;
struct pwm_lowerhalf_s *pwm;
int ret;
/* Have we already initialized? */
if (!initialized)
{
/* Call stm32_pwminitialize() to get an instance of the PWM interface */
pwm = stm32_pwminitialize(STM32TINY_PWMTIMER);
if (!pwm)
{
adbg("Failed to get the STM32 PWM lower half\n");
return -ENODEV;
}
/* Register the PWM driver at "/dev/pwm0" */
ret = pwm_register("/dev/pwm0", pwm);
if (ret < 0)
{
adbg("pwm_register failed: %d\n", ret);
return ret;
}
/* Now we are initialized */
initialized = true;
}
return OK;
}
#endif /* CONFIG_PWM */

186
configs/stm32_tiny/src/up_spi.c Normal file
View File

@ -0,0 +1,186 @@
/************************************************************************************
* configs/stm32_tiny/src/up_spi.c
*
* Copyright (C) 2009, 2011-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/spi.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "stm32.h"
#include "stm32_tiny-internal.h"
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
/************************************************************************************
* Definitions
************************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG too) */
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_VERBOSE
# undef CONFIG_DEBUG_SPI
#endif
#ifdef CONFIG_DEBUG_SPI
# define spidbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define spivdbg lldbg
# else
# define spivdbg(x...)
# endif
#else
# define spidbg(x...)
# define spivdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the HY-MiniSTM32 board.
*
************************************************************************************/
void stm32_spiinitialize(void)
{
/* NOTE: Clocking for SPI1 and/or SPI2 was already provided in stm32_rcc.c.
* Configurations of SPI pins is performed in stm32_spi.c.
* Here, we only initialize chip select pins unique to the board
* architecture.
*/
#ifdef CONFIG_STM32_SPI2
# ifdef CONFIG_WL_NRF24L01
/* Configure the SPI-based NRF24L01 chip select GPIO */
spivdbg("Configure GPIO for SPI2/CS\n");
stm32_configgpio(GPIO_NRF24L01_CS);
# endif
#endif
}
/****************************************************************************
* Name: stm32_spi1/2select and stm32_spi1/2status
*
* Description:
* The external functions, stm32_spi1/2/3select and stm32_spi1/2/3status must be
* provided by board-specific logic. They are implementations of the select
* and status methods of the SPI interface defined by struct spi_ops_s (see
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
* are provided by common STM32 logic. To use this common SPI logic on your
* board:
*
* 1. Provide logic in stm32_boardinitialize() to configure SPI chip select
* pins.
* 2. Provide stm32_spi1/2/3select() and stm32_spi1/2/3status() functions in your
* board-specific logic. These functions will perform chip selection and
* status operations using GPIOs in the way your board is configured.
* 3. Add a calls to up_spiinitialize() in your low level application
* initialization logic
* 4. The handle returned by up_spiinitialize() may then be used to bind the
* SPI driver to higher level logic (e.g., calling
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
* the SPI MMC/SD driver).
*
****************************************************************************/
#ifdef CONFIG_STM32_SPI1
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
}
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
return 0;
}
#endif
#ifdef CONFIG_STM32_SPI2
void stm32_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
switch(devid)
{
#ifdef CONFIG_WL_NRF24L01
case SPIDEV_WIRELESS:
spivdbg("nRF24L01 device %s\n", selected ? "asserted" : "de-asserted");
/* Set the GPIO low to select and high to de-select */
stm32_gpiowrite(GPIO_NRF24L01_CS, !selected);
break;
#endif
default:
break;
}
}
uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
uint8_t status = 0;
switch(devid)
{
#ifdef CONFIG_WL_NRF24L01
case SPIDEV_WIRELESS:
status |= SPI_STATUS_PRESENT;
break;
#endif
default:
break;
}
return status;
}
#endif
#endif /* CONFIG_STM32_SPI1 || CONFIG_STM32_SPI2 */

117
configs/stm32_tiny/src/up_usbdev.c Normal file
View File

@ -0,0 +1,117 @@
/************************************************************************************
* configs/stm32_tiny/src/up_usbdev.c
*
* Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
* Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/usb/usbdev.h>
#include <nuttx/usb/usbdev_trace.h>
#include "up_arch.h"
#include "stm32.h"
#include "stm32_tiny-internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: stm32_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the Hy-Mini STM32v board.
*
************************************************************************************/
void stm32_usbinitialize(void)
{
ulldbg("called\n");
/* USB Soft Connect Pullup */
stm32_configgpio(GPIO_USB_PULLUP);
}
/************************************************************************************
* Name: stm32_usbpullup
*
* Description:
* If USB is supported and the board supports a pullup via GPIO (for USB software
* connect and disconnect), then the board software must provide stm32_pullup.
* See include/nuttx/usb/usbdev.h for additional description of this method.
* Alternatively, if no pull-up GPIO the following EXTERN can be redefined to be
* NULL.
*
************************************************************************************/
int stm32_usbpullup(FAR struct usbdev_s *dev, bool enable)
{
usbtrace(TRACE_DEVPULLUP, (uint16_t)enable);
stm32_gpiowrite(GPIO_USB_PULLUP, !enable);
return OK;
}
/************************************************************************************
* Name: stm32_usbsuspend
*
* Description:
* Board logic must provide the stm32_usbsuspend logic if the USBDEV driver is
* used. This function is called whenever the USB enters or leaves suspend mode.
* This is an opportunity for the board logic to shutdown clocks, power, etc.
* while the USB is suspended.
*
************************************************************************************/
void stm32_usbsuspend(FAR struct usbdev_s *dev, bool resume)
{
ulldbg("resume: %d\n", resume);
}

135
configs/stm32_tiny/src/up_watchdog.c Normal file
View File

@ -0,0 +1,135 @@
/************************************************************************************
* configs/stm_tiny/src/up_watchdog.c
*
* Copyright (C) 2012-2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/watchdog.h>
#include <arch/board/board.h>
#include "stm32_wdg.h"
#ifdef CONFIG_WATCHDOG
/************************************************************************************
* Definitions
************************************************************************************/
/* Configuration *******************************************************************/
/* Wathdog hardware should be enabled */
#if !defined(CONFIG_STM32_WWDG) && !defined(CONFIG_STM32_IWDG)
# warning "One of CONFIG_STM32_WWDG or CONFIG_STM32_IWDG must be defined"
#endif
/* Select the path to the registered watchdog timer device */
#ifndef CONFIG_STM32_WDG_DEVPATH
# ifdef CONFIG_EXAMPLES_WATCHDOG_DEVPATH
# define CONFIG_STM32_WDG_DEVPATH CONFIG_EXAMPLES_WATCHDOG_DEVPATH
# else
# define CONFIG_STM32_WDG_DEVPATH "/dev/watchdog0"
# endif
#endif
/* Use the un-calibrated LSI frequency if we have nothing better */
#if defined(CONFIG_STM32_IWDG) && !defined(CONFIG_STM32_LSIFREQ)
# define CONFIG_STM32_LSIFREQ STM32_LSI_FREQUENCY
#endif
/* Debug ***************************************************************************/
/* Non-standard debug that may be enabled just for testing the watchdog timer */
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_WATCHDOG
#endif
#ifdef CONFIG_DEBUG_WATCHDOG
# define wdgdbg dbg
# define wdglldbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define wdgvdbg vdbg
# define wdgllvdbg llvdbg
# else
# define wdgvdbg(x...)
# define wdgllvdbg(x...)
# endif
#else
# define wdgdbg(x...)
# define wdglldbg(x...)
# define wdgvdbg(x...)
# define wdgllvdbg(x...)
#endif
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/****************************************************************************
* Name: up_wdginitialize()
*
* Description:
* Perform architecuture-specific initialization of the Watchdog hardware.
* This interface must be provided by all configurations using
* apps/examples/watchdog
*
****************************************************************************/
int up_wdginitialize(void)
{
/* Initialize tha register the watchdog timer device */
#if defined(CONFIG_STM32_WWDG)
stm32_wwdginitialize(CONFIG_STM32_WDG_DEVPATH);
return OK;
#elif defined(CONFIG_STM32_IWDG)
stm32_iwdginitialize(CONFIG_STM32_WDG_DEVPATH, CONFIG_STM32_LSIFREQ);
return OK;
#else
return -ENODEV;
#endif
}
#endif /* CONFIG_WATCHDOG */

138
configs/stm32_tiny/src/up_wireless.c Normal file
View File

@ -0,0 +1,138 @@
/************************************************************************************
* configs/stm32_tiny/src/up_wireless.c
*
* Copyright (C) 2009, 2013 Gregory Nutt. All rights reserved.
* Author: Laurent Latil <laurent@latil.nom.fr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <errno.h>
#include <nuttx/spi.h>
#include <nuttx/wireless/nrf24l01.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "stm32.h"
#include "stm32_tiny-internal.h"
/************************************************************************************
* Private Function Prototypes
************************************************************************************/
static int stm32tiny_wl_irq_attach(xcpt_t isr);
static void stm32tiny_wl_irq_enable(bool enable);
static void stm32tiny_wl_chip_enable(bool enable);
/************************************************************************************
* Private Data
************************************************************************************/
static FAR struct nrf24l01_config_s nrf_cfg =
{
.irqattach = stm32tiny_wl_irq_attach,
.irqenable = stm32tiny_wl_irq_enable,
.chipenable = stm32tiny_wl_chip_enable,
};
static xcpt_t g_isr;
/************************************************************************************
* Private Functions
************************************************************************************/
static int stm32tiny_wl_irq_attach(xcpt_t isr)
{
vdbg("IRQ attached\n");
g_isr = isr;
stm32_gpiosetevent(GPIO_NRF24L01_IRQ, false, true, false, g_isr);
return OK;
}
static void stm32tiny_wl_irq_enable(bool enable)
{
vdbg("IRQ_enabled:%d\n", enable);
stm32_gpiosetevent(GPIO_NRF24L01_IRQ, false, true, false, enable? g_isr:NULL);
}
static void stm32tiny_wl_chip_enable(bool enable)
{
vdbg("CE:%d\n", enable);
stm32_gpiowrite(GPIO_NRF24L01_CE, enable);
}
/************************************************************************************
* Public Functions
************************************************************************************/
void up_wlinitialize(void)
{
# ifndef CONFIG_STM32_SPI2
# error "STM32_SPI2 is required to support nRF24L01 module on this board"
# endif
int result;
FAR struct spi_dev_s *spidev;
/* Setup CE & IRQ line IOs */
stm32_configgpio(GPIO_NRF24L01_CE);
stm32_configgpio(GPIO_NRF24L01_IRQ);
/* Init SPI bus */
spidev = up_spiinitialize(2);
if (!spidev)
{
dbg("Failed to initialize SPI bus\n");
return;
}
result = nrf24l01_register(spidev, &nrf_cfg);
if (result != OK)
{
dbg("Failed to register initialize SPI bus\n");
return;
}
}

111
configs/stm32_tiny/usbnsh/Make.defs Normal file
View File

@ -0,0 +1,111 @@
############################################################################
# configs/stm32_tiny/usbnsh/Make.defs
#
# Copyright (C) 2011, 2012-2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
include ${TOPDIR}/tools/Config.mk
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
LDSCRIPT = ld.script
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/copydir.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
ARCHOPTIMIZATION = -g -Os
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-nuttx-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

729
configs/stm32_tiny/usbnsh/defconfig Normal file
View File

@ -0,0 +1,729 @@
#
# Automatically generated file; DO NOT EDIT.
# Nuttx/ Configuration
#
CONFIG_NUTTX_NEWCONFIG=y
#
# Build Setup
#
# CONFIG_EXPERIMENTAL is not set
CONFIG_HOST_LINUX=y
# CONFIG_HOST_OSX is not set
# CONFIG_HOST_WINDOWS is not set
# CONFIG_HOST_OTHER is not set
#
# Build Configuration
#
# CONFIG_APPS_DIR="../apps"
# CONFIG_BUILD_2PASS is not set
#
# Binary Output Formats
#
# CONFIG_RRLOAD_BINARY is not set
# CONFIG_INTELHEX_BINARY is not set
# CONFIG_MOTOROLA_SREC is not set
CONFIG_RAW_BINARY=y
#
# Customize Header Files
#
# CONFIG_ARCH_STDBOOL_H is not set
# CONFIG_ARCH_MATH_H is not set
# CONFIG_ARCH_FLOAT_H is not set
# CONFIG_ARCH_STDARG_H is not set
#
# Debug Options
#
# CONFIG_DEBUG is not set
# CONFIG_DEBUG_SYMBOLS is not set
#
# System Type
#
# CONFIG_ARCH_8051 is not set
CONFIG_ARCH_ARM=y
# CONFIG_ARCH_AVR is not set
# CONFIG_ARCH_HC is not set
# CONFIG_ARCH_MIPS is not set
# CONFIG_ARCH_RGMP is not set
# CONFIG_ARCH_SH is not set
# CONFIG_ARCH_SIM is not set
# CONFIG_ARCH_X86 is not set
# CONFIG_ARCH_Z16 is not set
# CONFIG_ARCH_Z80 is not set
CONFIG_ARCH="arm"
#
# ARM Options
#
# CONFIG_ARCH_CHIP_C5471 is not set
# CONFIG_ARCH_CHIP_CALYPSO is not set
# CONFIG_ARCH_CHIP_DM320 is not set
# CONFIG_ARCH_CHIP_IMX is not set
# CONFIG_ARCH_CHIP_KINETIS is not set
# CONFIG_ARCH_CHIP_KL is not set
# CONFIG_ARCH_CHIP_LM is not set
# CONFIG_ARCH_CHIP_LPC17XX is not set
# CONFIG_ARCH_CHIP_LPC214X is not set
# CONFIG_ARCH_CHIP_LPC2378 is not set
# CONFIG_ARCH_CHIP_LPC31XX is not set
# CONFIG_ARCH_CHIP_LPC43XX is not set
# CONFIG_ARCH_CHIP_NUC1XX is not set
# CONFIG_ARCH_CHIP_SAM3U is not set
CONFIG_ARCH_CHIP_STM32=y
# CONFIG_ARCH_CHIP_STR71X is not set
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_FAMILY="armv7-m"
CONFIG_ARCH_CHIP="stm32"
# CONFIG_ARMV7M_USEBASEPRI is not set
CONFIG_ARCH_HAVE_CMNVECTOR=y
# CONFIG_ARMV7M_CMNVECTOR is not set
CONFIG_ARCH_HAVE_MPU=y
# CONFIG_ARMV7M_MPU is not set
#
# ARMV7M Configuration Options
#
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI=y
# CONFIG_SERIAL_TERMIOS is not set
#
# STM32 Configuration Options
#
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
# CONFIG_ARCH_CHIP_STM32F100CB is not set
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
# CONFIG_ARCH_CHIP_STM32F100RB is not set
# CONFIG_ARCH_CHIP_STM32F100RC is not set
# CONFIG_ARCH_CHIP_STM32F100RD is not set
# CONFIG_ARCH_CHIP_STM32F100RE is not set
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
# CONFIG_ARCH_CHIP_STM32F100VB is not set
# CONFIG_ARCH_CHIP_STM32F100VC is not set
# CONFIG_ARCH_CHIP_STM32F100VD is not set
# CONFIG_ARCH_CHIP_STM32F100VE is not set
CONFIG_ARCH_CHIP_STM32F103C8=y
# CONFIG_ARCH_CHIP_STM32F103C4 is not set
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
# CONFIG_ARCH_CHIP_STM32F107VC is not set
# CONFIG_ARCH_CHIP_STM32F207IG is not set
# CONFIG_ARCH_CHIP_STM32F302CB is not set
# CONFIG_ARCH_CHIP_STM32F302CC is not set
# CONFIG_ARCH_CHIP_STM32F302RB is not set
# CONFIG_ARCH_CHIP_STM32F302RC is not set
# CONFIG_ARCH_CHIP_STM32F302VB is not set
# CONFIG_ARCH_CHIP_STM32F302VC is not set
# CONFIG_ARCH_CHIP_STM32F303CB is not set
# CONFIG_ARCH_CHIP_STM32F303CC is not set
# CONFIG_ARCH_CHIP_STM32F303RB is not set
# CONFIG_ARCH_CHIP_STM32F303RC is not set
# CONFIG_ARCH_CHIP_STM32F303VB is not set
# CONFIG_ARCH_CHIP_STM32F303VC is not set
# CONFIG_ARCH_CHIP_STM32F405RG is not set
# CONFIG_ARCH_CHIP_STM32F405VG is not set
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
# CONFIG_ARCH_CHIP_STM32F407VE is not set
# CONFIG_ARCH_CHIP_STM32F407VG is not set
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
# CONFIG_ARCH_CHIP_STM32F407IE is not set
# CONFIG_ARCH_CHIP_STM32F407IG is not set
# CONFIG_ARCH_CHIP_STM32F427V is not set
# CONFIG_ARCH_CHIP_STM32F427Z is not set
# CONFIG_ARCH_CHIP_STM32F427I is not set
CONFIG_STM32_STM32F10XX=y
CONFIG_STM32_PERFORMANCELINE=y
CONFIG_STM32_MEDIUMDENSITY=y
# CONFIG_STM32_DFU is not set
#
# STM32 Peripheral Support
#
# CONFIG_STM32_ADC1 is not set
# CONFIG_STM32_ADC2 is not set
# CONFIG_STM32_ADC3 is not set
# CONFIG_STM32_BKP is not set
# CONFIG_STM32_CAN1 is not set
# CONFIG_STM32_CRC is not set
# CONFIG_STM32_DMA1 is not set
# CONFIG_STM32_DMA2 is not set
# CONFIG_STM32_DAC1 is not set
# CONFIG_STM32_DAC2 is not set
# CONFIG_STM32_I2C1 is not set
# CONFIG_STM32_I2C2 is not set
# CONFIG_STM32_IWDG is not set
# CONFIG_STM32_PWR is not set
# CONFIG_STM32_SDIO is not set
# CONFIG_STM32_SPI1 is not set
# CONFIG_STM32_SPI2 is not set
# CONFIG_STM32_TIM1 is not set
# CONFIG_STM32_TIM2 is not set
# CONFIG_STM32_TIM3 is not set
# CONFIG_STM32_TIM4 is not set
# CONFIG_STM32_TIM5 is not set
# CONFIG_STM32_TIM6 is not set
# CONFIG_STM32_TIM7 is not set
# CONFIG_STM32_TIM8 is not set
CONFIG_STM32_USART1=y
# CONFIG_STM32_USART2 is not set
# CONFIG_STM32_USART3 is not set
# CONFIG_STM32_UART4 is not set
# CONFIG_STM32_UART5 is not set
CONFIG_STM32_USB=y
# CONFIG_STM32_WWDG is not set
#
# Alternate Pin Mapping
#
# CONFIG_STM32_USART1_REMAP is not set
# CONFIG_STM32_JTAG_DISABLE is not set
CONFIG_STM32_JTAG_FULL_ENABLE=y
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
# CONFIG_STM32_JTAG_SW_ENABLE is not set
# CONFIG_STM32_FORCEPOWER is not set
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
CONFIG_STM32_USART=y
#
# U[S]ART Configuration
#
# CONFIG_USART1_RS485 is not set
# CONFIG_STM32_USART_SINGLEWIRE is not set
#
# USB Host Configuration
#
#
# USB Device Configuration
#
#
# External Memory Configuration
#
#
# Architecture Options
#
# CONFIG_ARCH_NOINTC is not set
# CONFIG_ARCH_VECNOTIRQ is not set
# CONFIG_ARCH_DMA is not set
CONFIG_ARCH_IRQPRIO=y
# CONFIG_CUSTOM_STACK is not set
# CONFIG_ADDRENV is not set
CONFIG_ARCH_HAVE_VFORK=y
CONFIG_ARCH_STACKDUMP=y
# CONFIG_ENDIAN_BIG is not set
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
CONFIG_ARCH_HAVE_RAMVECTORS=y
# CONFIG_ARCH_RAMVECTORS is not set
#
# Board Settings
#
CONFIG_BOARD_LOOPSPERMSEC=5483
# CONFIG_ARCH_CALIBRATION is not set
CONFIG_DRAM_START=0x20000000
CONFIG_DRAM_SIZE=20480
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
CONFIG_ARCH_INTERRUPTSTACK=0
#
# Boot options
#
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
CONFIG_BOOT_RUNFROMFLASH=y
# CONFIG_BOOT_RUNFROMISRAM is not set
# CONFIG_BOOT_RUNFROMSDRAM is not set
# CONFIG_BOOT_COPYTORAM is not set
#
# Board Selection
#
CONFIG_ARCH_BOARD_STM32_TINY=y
# CONFIG_ARCH_BOARD_CUSTOM is not set
CONFIG_ARCH_BOARD="stm32_tiny"
#
# Common Board Options
#
CONFIG_ARCH_HAVE_LEDS=y
CONFIG_ARCH_LEDS=y
CONFIG_NSH_MMCSDMINOR=0
#
# Board-Specific Options
#
#
# RTOS Features
#
# CONFIG_BOARD_INITIALIZE is not set
CONFIG_MSEC_PER_TICK=10
CONFIG_RR_INTERVAL=200
# CONFIG_SCHED_INSTRUMENTATION is not set
CONFIG_TASK_NAME_SIZE=0
# CONFIG_SCHED_HAVE_PARENT is not set
# CONFIG_JULIAN_TIME is not set
CONFIG_START_YEAR=2011
CONFIG_START_MONTH=7
CONFIG_START_DAY=5
# CONFIG_DEV_CONSOLE is not set
# CONFIG_MUTEX_TYPES is not set
# CONFIG_PRIORITY_INHERITANCE is not set
# CONFIG_FDCLONE_DISABLE is not set
# CONFIG_FDCLONE_STDIO is not set
CONFIG_SDCLONE_DISABLE=y
CONFIG_SCHED_WAITPID=y
# CONFIG_SCHED_STARTHOOK is not set
# CONFIG_SCHED_ATEXIT is not set
# CONFIG_SCHED_ONEXIT is not set
CONFIG_USER_ENTRYPOINT="nsh_main"
# CONFIG_DISABLE_OS_API is not set
#
# Signal Numbers
#
CONFIG_SIG_SIGUSR1=1
CONFIG_SIG_SIGUSR2=2
CONFIG_SIG_SIGALARM=3
CONFIG_SIG_SIGCONDTIMEDOUT=16
#
# Sizes of configurable things (0 disables)
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Stack and heap information
#
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
#
# Device Drivers
#
CONFIG_DISABLE_POLL=y
CONFIG_DEV_NULL=y
# CONFIG_DEV_ZERO is not set
# CONFIG_LOOP is not set
# CONFIG_RAMDISK is not set
# CONFIG_CAN is not set
# CONFIG_PWM is not set
# CONFIG_I2C is not set
CONFIG_ARCH_HAVE_I2CRESET=y
# CONFIG_SPI is not set
# CONFIG_RTC is not set
# CONFIG_WATCHDOG is not set
# CONFIG_ANALOG is not set
# CONFIG_BCH is not set
# CONFIG_INPUT is not set
# CONFIG_LCD is not set
# CONFIG_MMCSD is not set
# CONFIG_MTD is not set
# CONFIG_PIPES is not set
# CONFIG_PM is not set
# CONFIG_POWER is not set
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_DEV_LOWCONSOLE is not set
CONFIG_SERIAL_REMOVABLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_USART1=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_USART1_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set
#
# USART1 Configuration
#
CONFIG_USART1_RXBUFSIZE=256
CONFIG_USART1_TXBUFSIZE=256
CONFIG_USART1_BAUD=115200
CONFIG_USART1_BITS=8
CONFIG_USART1_PARITY=0
CONFIG_USART1_2STOP=0
CONFIG_USBDEV=y
#
# USB Device Controller Driver Options
#
# CONFIG_USBDEV_ISOCHRONOUS is not set
# CONFIG_USBDEV_DUALSPEED is not set
CONFIG_USBDEV_SELFPOWERED=y
# CONFIG_USBDEV_BUSPOWERED is not set
CONFIG_USBDEV_MAXPOWER=100
# CONFIG_USBDEV_DMA is not set
CONFIG_USBDEV_TRACE=y
CONFIG_USBDEV_TRACE_NRECORDS=32
# CONFIG_USBDEV_TRACE_STRINGS is not set
#
# USB Device Class Driver Options
#
# CONFIG_USBDEV_COMPOSITE is not set
# CONFIG_PL2303 is not set
CONFIG_CDCACM=y
CONFIG_CDCACM_CONSOLE=y
CONFIG_CDCACM_EP0MAXPACKET=64
CONFIG_CDCACM_EPINTIN=1
CONFIG_CDCACM_EPINTIN_FSSIZE=64
CONFIG_CDCACM_EPINTIN_HSSIZE=64
CONFIG_CDCACM_EPBULKOUT=3
CONFIG_CDCACM_EPBULKOUT_FSSIZE=64
CONFIG_CDCACM_EPBULKOUT_HSSIZE=512
CONFIG_CDCACM_EPBULKIN=2
CONFIG_CDCACM_EPBULKIN_FSSIZE=64
CONFIG_CDCACM_EPBULKIN_HSSIZE=512
CONFIG_CDCACM_NWRREQS=4
CONFIG_CDCACM_NRDREQS=4
CONFIG_CDCACM_RXBUFSIZE=256
CONFIG_CDCACM_TXBUFSIZE=256
CONFIG_CDCACM_VENDORID=0x0525
CONFIG_CDCACM_PRODUCTID=0xa4a7
CONFIG_CDCACM_VENDORSTR="NuttX"
CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial"
# CONFIG_USBMSC is not set
# CONFIG_USBHOST is not set
# CONFIG_WIRELESS is not set
#
# System Logging Device Options
#
#
# System Logging
#
# CONFIG_RAMLOG is not set
#
# Networking Support
#
# CONFIG_NET is not set
#
# File Systems
#
#
# File system configuration
#
# CONFIG_DISABLE_MOUNTPOINT is not set
# CONFIG_FS_RAMMAP is not set
# CONFIG_FS_FAT is not set
# CONFIG_FS_NXFFS is not set
# CONFIG_FS_ROMFS is not set
# CONFIG_FS_BINFS is not set
#
# System Logging
#
# CONFIG_SYSLOG_ENABLE is not set
# CONFIG_SYSLOG is not set
#
# Graphics Support
#
# CONFIG_NX is not set
#
# Memory Management
#
# CONFIG_MM_MULTIHEAP is not set
# CONFIG_MM_SMALL is not set
CONFIG_MM_REGIONS=1
# CONFIG_GRAN is not set
#
# Binary Formats
#
# CONFIG_BINFMT_DISABLE is not set
# CONFIG_BINFMT_EXEPATH is not set
# CONFIG_NXFLAT is not set
# CONFIG_ELF is not set
CONFIG_BUILTIN=y
# CONFIG_PIC is not set
CONFIG_SYMTAB_ORDEREDBYNAME=y
#
# Library Routines
#
#
# Standard C Library Options
#
CONFIG_STDIO_BUFFER_SIZE=64
CONFIG_STDIO_LINEBUFFER=y
CONFIG_NUNGET_CHARS=2
CONFIG_LIB_HOMEDIR="/"
# CONFIG_LIBM is not set
# CONFIG_NOPRINTF_FIELDWIDTH is not set
# CONFIG_LIBC_FLOATINGPOINT is not set
# CONFIG_EOL_IS_CR is not set
# CONFIG_EOL_IS_LF is not set
# CONFIG_EOL_IS_BOTH_CRLF is not set
CONFIG_EOL_IS_EITHER_CRLF=y
# CONFIG_LIBC_EXECFUNCS is not set
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
# CONFIG_LIBC_STRERROR is not set
# CONFIG_LIBC_PERROR_STDOUT is not set
CONFIG_ARCH_LOWPUTC=y
CONFIG_LIB_SENDFILE_BUFSIZE=512
# CONFIG_ARCH_ROMGETC is not set
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
#
# Non-standard Library Support
#
# CONFIG_SCHED_WORKQUEUE is not set
# CONFIG_LIB_KBDCODEC is not set
#
# Basic CXX Support
#
# CONFIG_C99_BOOL8 is not set
# CONFIG_HAVE_CXX is not set
#
# Application Configuration
#
#
# Built-In Applications
#
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
#
# Examples
#
# CONFIG_EXAMPLES_BUTTONS is not set
# CONFIG_EXAMPLES_CAN is not set
# CONFIG_EXAMPLES_CDCACM is not set
# CONFIG_EXAMPLES_COMPOSITE is not set
# CONFIG_EXAMPLES_DHCPD is not set
# CONFIG_EXAMPLES_ELF is not set
# CONFIG_EXAMPLES_FTPC is not set
# CONFIG_EXAMPLES_FTPD is not set
# CONFIG_EXAMPLES_HELLO is not set
# CONFIG_EXAMPLES_HELLOXX is not set
# CONFIG_EXAMPLES_JSON is not set
# CONFIG_EXAMPLES_HIDKBD is not set
# CONFIG_EXAMPLES_KEYPADTEST is not set
# CONFIG_EXAMPLES_IGMP is not set
# CONFIG_EXAMPLES_LCDRW is not set
# CONFIG_EXAMPLES_MM is not set
# CONFIG_EXAMPLES_MOUNT is not set
# CONFIG_EXAMPLES_MODBUS is not set
CONFIG_EXAMPLES_NSH=y
# CONFIG_EXAMPLES_NULL is not set
# CONFIG_EXAMPLES_NX is not set
# CONFIG_EXAMPLES_NXCONSOLE is not set
# CONFIG_EXAMPLES_NXFFS is not set
# CONFIG_EXAMPLES_NXFLAT is not set
# CONFIG_EXAMPLES_NXHELLO is not set
# CONFIG_EXAMPLES_NXIMAGE is not set
# CONFIG_EXAMPLES_NXLINES is not set
# CONFIG_EXAMPLES_NXTEXT is not set
# CONFIG_EXAMPLES_OSTEST is not set
# CONFIG_EXAMPLES_PASHELLO is not set
# CONFIG_EXAMPLES_PIPE is not set
# CONFIG_EXAMPLES_POSIXSPAWN is not set
# CONFIG_EXAMPLES_QENCODER is not set
# CONFIG_EXAMPLES_RGMP is not set
# CONFIG_EXAMPLES_ROMFS is not set
# CONFIG_EXAMPLES_SENDMAIL is not set
# CONFIG_EXAMPLES_SERLOOP is not set
# CONFIG_EXAMPLES_TELNETD is not set
# CONFIG_EXAMPLES_THTTPD is not set
# CONFIG_EXAMPLES_TIFF is not set
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
# CONFIG_EXAMPLES_UDP is not set
# CONFIG_EXAMPLES_UIP is not set
# CONFIG_EXAMPLES_USBSERIAL is not set
# CONFIG_EXAMPLES_USBMSC is not set
# CONFIG_EXAMPLES_USBTERM is not set
# CONFIG_EXAMPLES_WATCHDOG is not set
#
# Graphics Support
#
# CONFIG_TIFF is not set
#
# Interpreters
#
# CONFIG_INTERPRETERS_FICL is not set
# CONFIG_INTERPRETERS_PCODE is not set
#
# Network Utilities
#
#
# Networking Utilities
#
# CONFIG_NETUTILS_CODECS is not set
# CONFIG_NETUTILS_DHCPC is not set
# CONFIG_NETUTILS_DHCPD is not set
# CONFIG_NETUTILS_FTPC is not set
# CONFIG_NETUTILS_FTPD is not set
# CONFIG_NETUTILS_JSON is not set
# CONFIG_NETUTILS_RESOLV is not set
# CONFIG_NETUTILS_SMTP is not set
# CONFIG_NETUTILS_TELNETD is not set
# CONFIG_NETUTILS_TFTPC is not set
# CONFIG_NETUTILS_THTTPD is not set
# CONFIG_NETUTILS_UIPLIB is not set
# CONFIG_NETUTILS_WEBCLIENT is not set
#
# FreeModBus
#
# CONFIG_MODBUS is not set
#
# NSH Library
#
CONFIG_NSH_LIBRARY=y
CONFIG_NSH_BUILTIN_APPS=y
#
# Disable Individual commands
#
# CONFIG_NSH_DISABLE_CAT is not set
# CONFIG_NSH_DISABLE_CD is not set
# CONFIG_NSH_DISABLE_CP is not set
# CONFIG_NSH_DISABLE_DD is not set
# CONFIG_NSH_DISABLE_ECHO is not set
# CONFIG_NSH_DISABLE_EXEC is not set
# CONFIG_NSH_DISABLE_EXIT is not set
# CONFIG_NSH_DISABLE_FREE is not set
# CONFIG_NSH_DISABLE_GET is not set
# CONFIG_NSH_DISABLE_HELP is not set
# CONFIG_NSH_DISABLE_HEXDUMP is not set
CONFIG_NSH_DISABLE_IFCONFIG=y
# CONFIG_NSH_DISABLE_KILL is not set
CONFIG_NSH_DISABLE_LOSETUP=y
# CONFIG_NSH_DISABLE_LS is not set
# CONFIG_NSH_DISABLE_MB is not set
# CONFIG_NSH_DISABLE_MKDIR is not set
# CONFIG_NSH_DISABLE_MKFATFS is not set
# CONFIG_NSH_DISABLE_MKFIFO is not set
# CONFIG_NSH_DISABLE_MKRD is not set
# CONFIG_NSH_DISABLE_MH is not set
# CONFIG_NSH_DISABLE_MOUNT is not set
# CONFIG_NSH_DISABLE_MW is not set
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
# CONFIG_NSH_DISABLE_PS is not set
# CONFIG_NSH_DISABLE_PING is not set
# CONFIG_NSH_DISABLE_PUT is not set
# CONFIG_NSH_DISABLE_PWD is not set
# CONFIG_NSH_DISABLE_RM is not set
# CONFIG_NSH_DISABLE_RMDIR is not set
# CONFIG_NSH_DISABLE_SET is not set
# CONFIG_NSH_DISABLE_SH is not set
# CONFIG_NSH_DISABLE_SLEEP is not set
# CONFIG_NSH_DISABLE_TEST is not set
# CONFIG_NSH_DISABLE_UMOUNT is not set
# CONFIG_NSH_DISABLE_UNSET is not set
# CONFIG_NSH_DISABLE_USLEEP is not set
# CONFIG_NSH_DISABLE_WGET is not set
# CONFIG_NSH_DISABLE_XD is not set
CONFIG_NSH_CODECS_BUFSIZE=128
CONFIG_NSH_FILEIOSIZE=1024
CONFIG_NSH_LINELEN=80
CONFIG_NSH_NESTDEPTH=3
# CONFIG_NSH_DISABLESCRIPT is not set
# CONFIG_NSH_DISABLEBG is not set
CONFIG_NSH_CONSOLE=y
# CONFIG_NSH_USBCONSOLE is not set
#
# USB Trace Support
#
# CONFIG_NSH_USBDEV_TRACE is not set
# CONFIG_NSH_CONDEV is not set
# CONFIG_NSH_ARCHINIT is not set
#
# NxWidgets/NxWM
#
#
# System NSH Add-Ons
#
#
# Custom Free Memory Command
#
# CONFIG_SYSTEM_FREE is not set
#
# I2C tool
#
#
# FLASH Program Installation
#
# CONFIG_SYSTEM_INSTALL is not set
#
# RAM Test
#
# CONFIG_SYSTEM_RAMTEST is not set
#
# readline()
#
CONFIG_SYSTEM_READLINE=y
CONFIG_READLINE_ECHO=y
#
# Power Off
#
# CONFIG_SYSTEM_POWEROFF is not set
#
# RAMTRON
#
# CONFIG_SYSTEM_RAMTRON is not set
#
# SD Card
#
# CONFIG_SYSTEM_SDCARD is not set
#
# Sysinfo
#
# CONFIG_SYSTEM_SYSINFO is not set
#
# USB Monitor
#

47
configs/stm32_tiny/usbnsh/setenv.sh Executable file
View File

@ -0,0 +1,47 @@
#!/bin/bash
# configs/stm32_tiny/usbnsh/setenv.sh
#
# Copyright (C) 2011, 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
export BUILDROOT_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"