sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Make the Olimex stm32 p107 clock configuratin the standard for connectivity line devices

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5175 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-09-22 15:12:50 +00:00
parent 5d4e660628
commit 683b1017a5
2 changed files with 123 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/src/stm32/Kconfig
View File

@ -1732,11 +1732,11 @@ config STM32_MII_EXTCLK
endchoice
config STM32_AUTONEG
bool "Use autonegtiation"
bool "Use autonegotiation"
default y
depends on STM32_ETHMAC
---help---
Use PHY autonegotion to determine speed and mode
Use PHY autonegotiation to determine speed and mode
config STM32_ETHFD
bool "Full duplex"

127
arch/arm/src/stm32/stm32f10xxx_rcc.c
View File

@ -90,7 +90,7 @@ static inline void rcc_reset(void)
regval = getreg32(STM32_RCC_CR); /* Reset HSEBYP bit */
regval &= ~RCC_CR_HSEBYP;
putreg32(regval, STM32_RCC_CR);
regval = getreg32(STM32_RCC_CFGR); /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE bits */
regval &= ~(RCC_CFGR_PLLSRC|RCC_CFGR_PLLXTPRE|RCC_CFGR_PLLMUL_MASK|RCC_CFGR_USBPRE);
putreg32(regval, STM32_RCC_CFGR);
@ -235,7 +235,7 @@ static inline void rcc_enableapb1(void)
regval |= RCC_APB1ENR_SPI2EN;
#endif
#ifdef CONFIG_STM32_SPI3
/* SPI 3 clock enable */
@ -411,13 +411,128 @@ static inline void rcc_enableapb2(void)
* Name: stm32_stdclockconfig
*
* Description:
* Called to change to new clock based on settings in board.h
*
* Called to change to new clock based on settings in board.h. This
* version is for the Connectivity Line parts.
*
* NOTE: This logic would need to be extended if you need to select low-
* power clocking modes!
****************************************************************************/
#ifndef CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG
#if !defined(CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG) && defined(CONFIG_STM32_CONNECTIVITYLINE)
static void stm32_stdclockconfig(void)
{
uint32_t regval;
/* Enable HSE */
regval = getreg32(STM32_RCC_CR);
regval &= ~RCC_CR_HSEBYP; /* Disable HSE clock bypass */
regval |= RCC_CR_HSEON; /* Enable HSE */
putreg32(regval, STM32_RCC_CR);
/* Set flash wait states
* Sysclk runs with 72MHz -> 2 waitstates.
* 0WS from 0-24MHz
* 1WS from 24-48MHz
* 2WS from 48-72MHz
*/
regval = getreg32(STM32_FLASH_ACR);
regval &= ~FLASH_ACR_LATENCY_MASK;
regval |= (FLASH_ACR_LATENCY_2|FLASH_ACR_PRTFBE);
putreg32(regval, STM32_FLASH_ACR);
/* Set up PLL input scaling (with source = PLL2) */
regval = getreg32(STM32_RCC_CFGR2);
regval &= ~(RCC_CFGR2_PREDIV2_MASK | RCC_CFGR2_PLL2MUL_MASK |
RCC_CFGR2_PREDIV1SRC_MASK | RCC_CFGR2_PREDIV1_MASK);
regval |= (STM32_PLL_PREDIV2 | STM32_PLL_PLL2MUL |
RCC_CFGR2_PREDIV1SRC_PLL2 | STM32_PLL_PREDIV1);
putreg32(regval, STM32_RCC_CFGR2);
/* Set the PCLK2 divider */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~(RCC_CFGR_PPRE2_MASK | RCC_CFGR_HPRE_MASK);
regval |= STM32_RCC_CFGR_PPRE2;
regval |= RCC_CFGR_HPRE_SYSCLK;
putreg32(regval, STM32_RCC_CFGR);
/* Set the PCLK1 divider */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~RCC_CFGR_PPRE1_MASK;
regval |= STM32_RCC_CFGR_PPRE1;
putreg32(regval, STM32_RCC_CFGR);
/* Enable PLL2 */
regval = getreg32(STM32_RCC_CR);
regval |= RCC_CR_PLL2ON;
putreg32(regval, STM32_RCC_CR);
/* Wait for PLL2 ready */
while((getreg32(STM32_RCC_CR) & RCC_CR_PLL2RDY) == 0);
/* Setup PLL3 for MII/RMII clock on MCO */
#if defined(CONFIG_STM32_MII_MCO) || defined(CONFIG_STM32_RMII_MCO)
regval = getreg32(STM32_RCC_CFGR2);
regval &= ~(RCC_CFGR2_PLL3MUL_MASK);
regval |= STM32_PLL_PLL3MUL;
putreg32(regval, STM32_RCC_CFGR2);
/* Switch PLL3 on */
regval = getreg32(STM32_RCC_CR);
regval |= RCC_CR_PLL3ON;
putreg32(regval, STM32_RCC_CR);
while ((getreg32(STM32_RCC_CR) & RCC_CR_PLL3RDY) == 0);
#endif
/* Set main PLL source and multiplier */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLMUL_MASK);
regval |= (RCC_CFGR_PLLSRC | STM32_PLL_PLLMUL);
putreg32(regval, STM32_RCC_CFGR);
/* Switch main PLL on */
regval = getreg32(STM32_RCC_CR);
regval |= RCC_CR_PLLON;
putreg32(regval, STM32_RCC_CR);
while ((getreg32(STM32_RCC_CR) & RCC_CR_PLLRDY) == 0);
/* Select PLL as system clock source */
regval = getreg32(STM32_RCC_CFGR);
regval &= ~RCC_CFGR_SW_MASK;
regval |= RCC_CFGR_SW_PLL;
putreg32(regval, STM32_RCC_CFGR);
/* Wait until PLL is used as the system clock source */
while ((getreg32(STM32_RCC_CFGR) & RCC_CFGR_SWS_PLL) == 0);
}
#endif
/****************************************************************************
* Name: stm32_stdclockconfig
*
* Description:
* Called to change to new clock based on settings in board.h. This
* version is for the non-Connectivity Line parts.
*
* NOTE: This logic would need to be extended if you need to select low-
* power clocking modes!
****************************************************************************/
#if !defined(CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG) && !defined(CONFIG_STM32_CONNECTIVITYLINE)
static void stm32_stdclockconfig(void)
{
uint32_t regval;
@ -430,7 +545,7 @@ static void stm32_stdclockconfig(void)
volatile int32_t timeout;
/* Enable External High-Speed Clock (HSE) */
regval = getreg32(STM32_RCC_CR);
regval &= ~RCC_CR_HSEBYP; /* Disable HSE clock bypass */
regval |= RCC_CR_HSEON; /* Enable HSE */