sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update ChangeLog

Browse Source
This commit is contained in:
Gregory Nutt 2016-05-30 13:31:19 -06:00
parent 39c1e3aba2
commit 6940fe9655
1 changed files with 56 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
ChangeLog
View File

@ -11813,3 +11813,59 @@
* fs/: Add logic to detach a file structure from a file descriptor. * fs/: Add logic to detach a file structure from a file descriptor.
This is for use only within the OS. It permits an open file or driver This is for use only within the OS. It permits an open file or driver
to be used across multiple threads (2016-05-26). to be used across multiple threads (2016-05-26).
* arch/arm/src/stm32l4: Get I2C working for STM32L4. From Dave
(ziggurat29) (2016-05-25).
* fs/ and include/nuttx/fs: Add logic to detach a file structure from a
file descriptor. This is for use only within the OS. It permits an
open file or driver to be used across multiple threads. (2016-05-26).
* drivers/analog/adc.c, include/nuttx/analog/adc.h, and all ADC lower
half drivers: No longer uses global adc_receive() call. Added a new
bind() method to the ADC interface. Now the ADC upper half driver
will register its receipt-of-data callback. This change allows the
ADC lower half driver to be used with a differ ADC upper half
(2016-05-26).
* drivers/analog/ads1255.c: Must not do SPI access from interrupt
handler. Use the worker thread instead. Must also lock the SPI bus
before using it. (2015-05-26).
* drivers/: Several SPI-based drivers modified. All drivers that use
SPI must call SPI_LOCK and SPI_UNLOCK. This is not optional
(2016-05-26).
* drivers/sensosrs: Fix a bug in crc computation for ms583730.
Implement POSIX read (2016-05-27).
* arch/arm/src/samv7: This is a fix to a problem in the handling of the
oneshot timer. Due to a wrong assumption concerning the behavior
directly after the start of the timer/counter the function
sam_oneshot_cancel(…) calculates the wrong remaining time. The code
assumes that the counter register is zero directly after the start of
the timer, but this is not true. To start the time/counter a software
trigger is invoked, this trigger starts the timer/count and sets the
counter register to zero, but the reset of the counter register is not
performed instantly. According to the datasheet: "The counter can be
reset by a trigger. In this case, the counter value passes to zero on
the next valid edge of the selected clock.” Thus the counter is set to
zero between 0 and USEC_PER_TICK microseconds after the clock was
started.
In my fix I use the freerun count value to determine if at least one
tick passed since the start of the timer and thus if the value of the
oneshot counter is correct. I also tried to use the function
up_timer_gettime(…) to achieve this but, at least if compiled with no
optimization the problem vanishes without using the value of the
function, the function call takes too long.
Another problem treated in the fix is that if the oneshot timer/counter
is canceled, we only know the remaining time with a precision of
USEC_PER_TICK microseconds. This means the calculated remaining time
is between 0 and USEC_PER_TICK microseconds too long. To fix this I
subtract one tick if the calculated remaining time is greater than one
tick and otherwise set the remaining time to zero. By doing so the
measured times are much more precise as without it. From Stefan Kolb
(2016-05-27).
* arch/arm/src/sama5: Stefan Kolb's change to the SAMV7 Oneshot Timer
should also be applied to the SAMA5 oneshot time since the drivers are
identical (2016-05-27).
* arch/arm/src/stm32l4: Add support for SPI 4 and 5 on stm32f411 chips.
From Konstantin Berezenko (2016-05-27).
* arch/arm/src/sam34: Stefan Kolb's change to the SAMV7 Oneshot Timer
should also be applied to the SAM3/4 oneshot time since the drivers
are identical (2016-05-29).
* arch/arm/src/stm32: Allow to not use all channel in a lower part of
PWM. From Pierre-noel Bouteville (2016-05-30).