sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Fix numerous typos in configuration variable names. Tracked down by Alan Carvalho de Assis

Browse Source
This commit is contained in:
Gregory Nutt 2015-05-23 17:08:35 -06:00
parent 8e71f90d84
commit 6973337ccd
5 changed files with 17 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/src/lpc2378/Kconfig
View File

@ -56,7 +56,7 @@ config LPC2378_MAM_SETUP
bool "Configure the Memory Accelerator Module (MAM)"
default y
config LPC2378_LPC2378_MAMCR_VALUE
config LPC2378_MAMCR_VALUE
int "Memory accelerator mode"
default 1
range 0 2
@ -67,7 +67,7 @@ config LPC2378_LPC2378_MAMCR_VALUE
PART 1
FULL 2
config LPC2378_LPC2378_MAMTIM_VALUE
config LPC2378_MAMTIM_VALUE
int "Memory accelerator timing value"
default 3
---help---

2
arch/arm/src/lpc43xx/lpc43_spifi.c
View File

@ -73,7 +73,7 @@
* mtd device on the SPIFI FLASH. NOTE: CONFIG_LPC43_SPIFI=y must also
* be defined to enable SPIFI setup support:
*
* CONFIG_SPIFI_RDONLY - Create a read only device on SPIFI.
* CONFIG_SPIFI_READONLY - Create a read only device on SPIFI.
* CONFIG_SPIFI_OFFSET - Offset the beginning of the block driver this many
* bytes into the device address space. This offset must be an exact
* multiple of the erase block size. Default 0.

6
arch/arm/src/nuc1xx/nuc_config.h
View File

@ -73,19 +73,19 @@
#ifndef CONFIG_NUC_UART0
# undef CONFIG_UART0_SERIAL_CONSOLE
# undef CONFIG_UART0_FLOW_CONTROL
# undef CONFIG_UART0_FLOWCONTROL
# undef CONFIG_UART0_IRDAMODE
# undef CONFIG_UART0_RS485MODE
#endif
#ifndef CONFIG_NUC_UART1
# undef CONFIG_UART1_SERIAL_CONSOLE
# undef CONFIG_UART1_FLOW_CONTROL
# undef CONFIG_UART1_FLOWCONTROL
# undef CONFIG_UART1_IRDAMODE
# undef CONFIG_UART1_RS485MODE
#endif
#undef CONFIG_UART2_FLOW_CONTROL /* UART2 does not support flow control */
#undef CONFIG_UART2_FLOWCONTROL /* UART2 does not support flow control */
#ifndef CONFIG_NUC_UART2
# undef CONFIG_UART2_SERIAL_CONSOLE
# undef CONFIG_UART2_IRDAMODE

10
arch/arm/src/nuc1xx/nuc_lowputc.c
View File

@ -160,7 +160,7 @@ void nuc_lowsetup(void)
regval = getreg32(NUC_GCR_GPB_MFP);
#ifdef CONFIG_NUC_UART0
#ifdef CONFIG_UART0_FLOW_CONTROL
#ifdef CONFIG_UART0_FLOWCONTROL
regval |= (GCR_GPB_MFP0 | GCR_GPB_MFP1 | GCR_GPB_MFP2| GCR_GPB_MFP3);
#else
regval |= (GCR_GPB_MFP0 | GCR_GPB_MFP1);
@ -173,7 +173,7 @@ void nuc_lowsetup(void)
*/
#ifdef CONFIG_NUC_UART1
#ifdef CONFIG_UART1_FLOW_CONTROL
#ifdef CONFIG_UART1_FLOWCONTROL
regval |= (GCR_GPB_MFP4 | GCR_GPB_MFP5 | GCR_GPB_MFP6| GCR_GPB_MFP7)
#else
regval |= (GCR_GPB_MFP4 | GCR_GPB_MFP5);
@ -182,14 +182,14 @@ void nuc_lowsetup(void)
putreg32(regval, NUC_GCR_GPB_MFP);
#if defined(CONFIG_UART0_FLOW_CONTROL) || defined(CONFIG_UART1_FLOW_CONTROL)
#if defined(CONFIG_UART0_FLOWCONTROL) || defined(CONFIG_UART1_FLOWCONTROL)
regval = getreg32(NUC_GCR_ALT_MFP);
regval &= ~GCR_ALT_MFP_EBI_EN;
#ifdef CONFIG_UART0_FLOW_CONTROL
#ifdef CONFIG_UART0_FLOWCONTROL
regval &= ~(GCR_ALT_MFP_EBI_NWRL_EN | GCR_ALT_MFP_EBI_NWRH_WN);
#endif
putreg32(NUC_GCR_ALT_MFP);
#endif /* CONFIG_UART0_FLOW_CONTROL || CONFIG_UART1_FLOW_CONTROL */
#endif /* CONFIG_UART0_FLOWCONTROL || CONFIG_UART1_FLOWCONTROL */
#endif /* CONFIG_NUC_UART0 || CONFIG_NUC_UART1 */
/* UART1 TX/RX support requires that GPIOD bits 14 and 15 be set. UART2

12
arch/arm/src/samdl/sam_config.h
View File

@ -60,7 +60,7 @@
# undef SAMDL_HAVE_USART0
# undef CONFIG_SAMDL_SERCOM0_ISUSART
# undef CONFIG_USART0_SERIAL_CONSOLE
# undef CONFIG_USART0_FLOW_CONTROL
# undef CONFIG_USART0_FLOWCONTROL
# undef CONFIG_USART0_IRDAMODE
# undef CONFIG_USART0_RS485MODE
#endif
@ -70,7 +70,7 @@
# undef SAMDL_HAVE_USART1
# undef CONFIG_SAMDL_SERCOM1_ISUSART
# undef CONFIG_USART1_SERIAL_CONSOLE
# undef CONFIG_USART1_FLOW_CONTROL
# undef CONFIG_USART1_FLOWCONTROL
# undef CONFIG_USART1_IRDAMODE
# undef CONFIG_USART1_RS485MODE
#endif
@ -80,7 +80,7 @@
# undef SAMDL_HAVE_USART2
# undef CONFIG_SAMDL_SERCOM2_ISUSART
# undef CONFIG_USART2_SERIAL_CONSOLE
# undef CONFIG_USART2_FLOW_CONTROL
# undef CONFIG_USART2_FLOWCONTROL
# undef CONFIG_USART2_IRDAMODE
# undef CONFIG_USART2_RS485MODE
#endif
@ -90,7 +90,7 @@
# undef SAMDL_HAVE_USART3
# undef CONFIG_SAMDL_SERCOM3_ISUSART
# undef CONFIG_USART3_SERIAL_CONSOLE
# undef CONFIG_USART3_FLOW_CONTROL
# undef CONFIG_USART3_FLOWCONTROL
# undef CONFIG_USART3_IRDAMODE
# undef CONFIG_USART3_RS485MODE
#endif
@ -100,7 +100,7 @@
# undef SAMDL_HAVE_USART4
# undef CONFIG_SAMDL_SERCOM4_ISUSART
# undef CONFIG_USART4_SERIAL_CONSOLE
# undef CONFIG_USART4_FLOW_CONTROL
# undef CONFIG_USART4_FLOWCONTROL
# undef CONFIG_USART4_IRDAMODE
# undef CONFIG_USART4_RS485MODE
#endif
@ -110,7 +110,7 @@
# undef SAMDL_HAVE_USART5
# undef CONFIG_SAMDL_SERCOM5_ISUSART
# undef CONFIG_USART5_SERIAL_CONSOLE
# undef CONFIG_USART5_FLOW_CONTROL
# undef CONFIG_USART5_FLOWCONTROL
# undef CONFIG_USART5_IRDAMODE
# undef CONFIG_USART5_RS485MODE
#endif