sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update ChangeLog

Browse Source
This commit is contained in:
Gregory Nutt 2016-10-08 07:38:56 -06:00
parent 741e100dcf
commit 6ac51cb708
1 changed files with 103 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

104
ChangeLog
View File

@ -12393,7 +12393,7 @@
(2016-07-23).
* Freedom-K64F: Add PWM support. From Jordan MacIntyre (2016-07-25).
7.18 2016-xx-xx Gregory Nutt <gnutt@nuttx.org>
7.18 2016-10-09 Gregory Nutt <gnutt@nuttx.org>
* drivers/serial/pty.c, serial.c, usbdev/cdcacm.c, include/nuttx/fs/ioctl.h:
Fix FIONWRITE and add FIONSPACE. All implementations of FIONWRITE
@ -12672,3 +12672,105 @@
Vyhovanec (2016-09-02).
* MTD: SPI-based driver for Macronix MX25L3233F or MX25L6433F. From
Aleksandr Vyhovanec (2016-09-02).
* sched/: The TCB nchildren field should not be incremented when
pthreads are created (2016-09-06).
* sched/: Move fields related to parent/child task relationship out of
TCB into group structure (2016-09-06).
* STM32L4: Add support for USART3-USART5. For STM32L4 parts, the higher
number USART ports supported varies. Add the HAVE_USARTx definitions
to the configuration to allow enabling the higher numbered USART ports.
From Jim Wylder (2016-09-15).
* configs/stm32l476-mdk: Support basic booting and nsh on Motorola MDK.
The Motorola MDK is based off of an earlier version of NuttX. This
only provides a basic NSH shell. From Jim Wylder (2016-09-15).
* STM32 USB: Set USB address to avoid a failed assertion. From Pierre-noel
Bouteville (2016-09-15).
* STM32 L4 and L7 USB: Pierre's assertion-avoidance change should also be
applied to STM32 F7 and L4 (2016-09-15).
* sched/: mq_send() was not setting the errno value on certain failures
to allocate a message (2016-09-15).
* include/nuttx/modem: Move all modem-related IOCTL commands to a common
file to assure that they will be unique (2016-09-16).
* STM32 F4 Discovery: Add support for XEN1210 3D-board. From Alan
Carvalho de Assis (2016-09-17).
* drivers/sensors: Adds support for the Sensixs XEN1210 3D-board. This
sensor is used on NANOSATC-BR2 a Brazillian CUBESAT project. From
Alan Carvalho de Assis (2016-09-16).
* include/analog/dac.h: Make DAC structure packed. From Marc Rechté
(2016-09-20).
* All SAM Ethernet Drivers: Add support so that the drivers can be built
with CONFIG_NET_MULTIBUFFER=y (2016-09-20).
* Tiva Ethernet: Needs support for CONFIG_NET_MULTIBUFFER=y (2016-09-20).
* drivers/net: NET_TUN=y => NET_MULTIBUFFER=y. From Vladimir
Komendantskiy (2016-09-20).
* SAM3/4: Fix GPIO pull-up/down code. Enabling the pull-down resistor
while the pull-up resistor is still enabled is not possible. In this
case, the write of PIO_PPDER for the relevant I/O line is discarded.
Likewise, enabling the pull-up resistor while the pull-down resistor
is still enabled is not possible. In this case, the write of PIO_PUER
for the relevant I/O line is discarded. From Wolfgang Reißnegger
(2016-09-20).
* SAM GPIO: Apply Wolfgang's change for SAM3/4 to SAMA5 and SAMV7
(2016-09-20).
* Tiva QEI: Add QEI lower-half driver impl. for Tiva series chip. From
Young (2016-09-21).
* STM32, L4, and F7: Remove GPIO_ETH_RMII_TX_CLK. TX_CLK is not present
in RMII. Mateusz Szafoni (2016-09-22).
* sched/: Define 'group' even if HAVE_GROUPID is not set. From Mateusz
Szafoni (2016-09-22).
* sched/: vector table should have dimension NR_IRQS, not NR_IRQS+1.
From Sagitta Li (2016-09-22).
* fs/mount: Corrects a bad assertion noted by Pierre-noel Bouteville.
Also fixes a reference counting problem in an error condition: When
the mountpoint inode is found but is not an appropriate mountpoint,
the reference count on the inode was not being decremented (2016-09-22).
* libnx/nxglib: Fix handling of near-horizontal lines of width 1 in
nxgl_splitline(). Missing handling for degenerate condition caused
width 1 lines such as (0, 0) - (100, 10) to have gaps in the drawing.
From Petteri Aimonen (2016-09-22).
* drivers/net/slip.c: Fix calculations using MSEC_PER_TICK. If
USEC_PER_TICK is less than 1000, then MSEC_PER_TICK will be zero. It
will be inaccurate in any case (2016-09-25).
* Tiva QEI: Add a new ioctl command (set MAXPOS) for tiva QEI. From
Young (2016-09-26).
* LPC43xx Serial: There are some small problems in LPC43xx RS485 mode
configuration. In particular: (1) UART0,2,3 do not have DTR pins
(different from UART1), so, Kconfig needs to be adjusted. (2)
lpc43_uart.c in RS485 mode only configures DIR pin, but doesn't enable
pin output for UART0,2,3. (3) should be option to reverse DIR control
pin output polarity. (4) lpc43xx/chip/lpc43_uart.h doesn't have USART3
definitions. NOTE: I didn't modified and didn't tested USART1, as it
has different hardware. From Vytautas Lukenskas. From Vytautas
Lukenskas (2016-09-30).
* STM32 Ethernet: Correct typo in conditional logic. From Neil Hancock
(2016-10-01).
* sched/pthread and task: When a pthread is started, there is a small
bit of logic that will run on the thread of execution of the new
pthread. In the case where the new pthread has a lower priority than
the parent thread, then this could cause both the parent thread and
the new pthread to be blocked at the priority of the lower priority
pthread (assuming that CONFIG_PRIORITY_INHERITANCE is not selected).
This change temporarily boosts the priority of the new pthread to at
least the priority of the new pthread to at least the priority of the
parent thread. When that bit of logic has executed on the thread of
execution of the new pthread, it will then drop to the correct
priority (if necessary) before calling into the new pthread's entry
point (2016-10-01).
* configs/stm32f103-minimum: Add stm32_bringup support and userled
example to STM32F103 Minimum board. From Alan Carvalho de Assis
(2016-10-02).
* STM32 L4: Add support for quadrature encoders on STM32L4. Sebastien
Lorquet (2016-10-02).
* configs: Add support for qencoders on various nucleo boards. From
Sebastien Lorquet (2016-10-03).
* STM32 L4 USB Device: Fixed L4 USB Driver by avoiding SETUPDONE and
EPOUT_SETUP. From David Sidrane (2016-10-04).
* configs/olimex-stm32-e407: Add some networking configurations. From
Mateusz Szafoni (2016-10-06).
* STM32 SPI: stm32_modifycr2 should be available on all platforms if DMA
is enabled. (2016-10-06).
* STM32 DMA2D: fix an error in up_dma2dcreatelayer where an invalid
pointer was returned when a certain underlying function failed. From
Jens Gräf (2016-10-07).
7.19 2016-xx-xx Gregory Nutt <gnutt@nuttx.org>