Add hooks for SD media change callbacks
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4267 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
5c005c857c
commit
6b451e6c7c
@ -1,199 +1,380 @@
|
||||
/************************************************************************************
|
||||
* configs/olimex-lpc1766stk/src/up_ssp.c
|
||||
* arch/arm/src/board/up_ssp.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "chip.h"
|
||||
#include "lpc17_internal.h"
|
||||
#include "lpc1766stk_internal.h"
|
||||
|
||||
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* The following enable debug output from this file (needs CONFIG_DEBUG too).
|
||||
*
|
||||
* CONFIG_SSP_DEBUG - Define to enable basic SSP debug
|
||||
* CONFIG_SSP_VERBOSE - Define to enable verbose SSP debug
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SSP_DEBUG
|
||||
# define sspdbg lldbg
|
||||
# ifdef CONFIG_SSP_VERBOSE
|
||||
# define sspvdbg lldbg
|
||||
# else
|
||||
# define sspvdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef CONFIG_SSP_VERBOSE
|
||||
# define sspdbg(x...)
|
||||
# define sspvdbg(x...)
|
||||
#endif
|
||||
|
||||
/* Dump GPIO registers */
|
||||
|
||||
#ifdef CONFIG_SSP_VERBOSE
|
||||
# define ssp_dumpssp0gpio(m) lpc17_dumpgpio(LPC1766STK_LCD_CS, m)
|
||||
# define ssp_dumpssp1gpio(m) lpc17_dumpgpio(LPC1766STK_MMC_CS, m)
|
||||
#else
|
||||
# define ssp_dumpssp0gpio(m)
|
||||
# define ssp_dumpssp1gpio(m)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_sspinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the LPC1766-STK.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function lpc17_sspinitialize(void)
|
||||
{
|
||||
/* Configure the SSP0 chip select GPIOs. Only the Nokia LCD is connected to SSP0 */
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP0
|
||||
ssp_dumpssp0gpio("BEFORE SSP0 Initialization");
|
||||
lpc17_configgpio(LPC1766STK_LCD_CS);
|
||||
ssp_dumpssp0gpio("AFTER SSP0 Initialization");
|
||||
#endif
|
||||
|
||||
/* Configure SSP1 chip select GPIOs. Only the SD/MMC card slot is connected to SSP1 */
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
ssp_dumpssp0gpio("BEFORE SSP1 Initialization");
|
||||
lpc17_configgpio(LPC1766STK_MMC_CS);
|
||||
|
||||
/* Also configure the SD/MMC power GPIO (but leave power off). This really has
|
||||
* nothing to do with SSP, but does belong with other SD/MMC GPIO configuration
|
||||
* settings.
|
||||
*/
|
||||
|
||||
lpc17_configgpio(LPC1766STK_MMC_PWR);
|
||||
ssp_dumpssp0gpio("AFTER SSP1 Initialization");
|
||||
#endif
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
|
||||
* must be provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common LPC17xx logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select
|
||||
* pins.
|
||||
* 2. Provide lpc17_ssp0/ssp1select() and lpc17_ssp0/ssp1status() functions
|
||||
* in your board-specific logic. These functions will perform chip selection
|
||||
* and status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP0
|
||||
void lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
if (devid == SPIDEV_DISPLAY)
|
||||
{
|
||||
/* Assert/de-assert the CS pin to the card */
|
||||
|
||||
ssp_dumpssp0gpio("lpc17_ssp0select() Entry");
|
||||
lpc17_gpiowrite(LPC1766STK_LCD_CS, !selected);
|
||||
ssp_dumpssp0gpio("lpc17_ssp0select() Exit");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
sspdbg("Returning nothing\n");
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
void lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
if (devid == SPIDEV_MMCSD)
|
||||
{
|
||||
/* Assert/de-assert the CS pin to the card */
|
||||
|
||||
ssp_dumpssp1gpio("lpc17_ssp1select() Entry");
|
||||
lpc17_gpiowrite(LPC1766STK_MMC_CS, !selected);
|
||||
ssp_dumpssp1gpio("lpc17_ssp1select() Exit");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
sspdbg("Returning SPI_STATUS_PRESENT\n");
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_LPC17_SSP0 || CONFIG_LPC17_SSP1 */
|
||||
/************************************************************************************
|
||||
* configs/olimex-lpc1766stk/src/up_ssp.c
|
||||
* arch/arm/src/board/up_ssp.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/spi.h>
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
#include <nuttx/irq.h>
|
||||
#endif
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "chip.h"
|
||||
#include "lpc17_internal.h"
|
||||
#include "lpc1766stk_internal.h"
|
||||
|
||||
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
/* Configuration ************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
# ifndef CONFIG_GPIO_IRQ
|
||||
# warning "CONFIG_GPIO_IRQ is required to support CONFIG_SPI_CALLBACK"
|
||||
# endif
|
||||
#endif
|
||||
|
||||
/* Debug ********************************************************************/
|
||||
/* The following enable debug output from this file (needs CONFIG_DEBUG too).
|
||||
*
|
||||
* CONFIG_SSP_DEBUG - Define to enable basic SSP debug
|
||||
* CONFIG_SSP_VERBOSE - Define to enable verbose SSP debug
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SSP_DEBUG
|
||||
# define sspdbg lldbg
|
||||
# ifdef CONFIG_SSP_VERBOSE
|
||||
# define sspvdbg lldbg
|
||||
# else
|
||||
# define sspvdbg(x...)
|
||||
# endif
|
||||
#else
|
||||
# undef CONFIG_SSP_VERBOSE
|
||||
# define sspdbg(x...)
|
||||
# define sspvdbg(x...)
|
||||
#endif
|
||||
|
||||
/* Dump GPIO registers */
|
||||
|
||||
#ifdef CONFIG_SSP_VERBOSE
|
||||
# define ssp_dumpssp0gpio(m) lpc17_dumpgpio(LPC1766STK_LCD_CS, m)
|
||||
# define ssp_dumpssp1gpio(m) lpc17_dumpgpio(LPC1766STK_MMC_CS, m)
|
||||
#else
|
||||
# define ssp_dumpssp0gpio(m)
|
||||
# define ssp_dumpssp1gpio(m)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Types
|
||||
************************************************************************************/
|
||||
|
||||
/* This structure describes on media change callback */
|
||||
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
struct lpc17_mediachange_s
|
||||
{
|
||||
spi_mediachange_t callback; /* The media change callback */
|
||||
FAR void *arg; /* Callback argument */
|
||||
};
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Data
|
||||
************************************************************************************/
|
||||
|
||||
/* Registered media change callback */
|
||||
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
#ifdef CONFIG_LPC17_SSP0
|
||||
static struct lpc17_mediachange_s g_ssp0callback;
|
||||
#endif
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
static struct lpc17_mediachange_s g_ssp1callback;
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: ssp_cdirqsetup
|
||||
*
|
||||
* Description:
|
||||
* Setup to receive a card detection interrupt
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
static void ssp_cdirqsetup(int irq, xcpt_t irqhandler)
|
||||
{
|
||||
irqstate_t flags;
|
||||
|
||||
/* Disable interrupts until we are done */
|
||||
|
||||
flags = irqsave();
|
||||
|
||||
/* Configure the interrupt. Either attach and enable the new
|
||||
* interrupt or disable and detach the old interrupt handler.
|
||||
*/
|
||||
|
||||
if (irqhandler)
|
||||
{
|
||||
/* Attach then enable the new interrupt handler */
|
||||
|
||||
(void)irq_attach(irq, irqhandler);
|
||||
up_enable_irq(irq);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Disable then then detach the the old interrupt handler */
|
||||
|
||||
up_disable_irq(irq);
|
||||
(void)irq_detach(irq);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: ssp0/1_cdinterrupt
|
||||
*
|
||||
* Description:
|
||||
* Handle card detection interrupt
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
#ifdef CONFIG_LPC17_SSP0
|
||||
static int ssp0_cdinterrupt(int irq, FAR void *context)
|
||||
{
|
||||
/* Invoke the media change callback */
|
||||
|
||||
if (g_ssp0callback.callback)
|
||||
{
|
||||
g_ssp0callback.callback(g_ssp0callback.arg);
|
||||
}
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
static int ssp1_cdinterrupt(int irq, FAR void *context)
|
||||
{
|
||||
/* Invoke the media change callback */
|
||||
|
||||
if (g_ssp1callback.callback)
|
||||
{
|
||||
g_ssp1callback.callback(g_ssp1callback.arg);
|
||||
}
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_sspinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the LPC1766-STK.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void weak_function lpc17_sspinitialize(void)
|
||||
{
|
||||
/* Configure the SSP0 chip select GPIOs. Only the Nokia LCD is connected to SSP0 */
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP0
|
||||
ssp_dumpssp0gpio("BEFORE SSP0 Initialization");
|
||||
lpc17_configgpio(LPC1766STK_LCD_CS);
|
||||
ssp_dumpssp0gpio("AFTER SSP0 Initialization");
|
||||
#endif
|
||||
|
||||
/* Configure SSP1 chip select GPIOs. Only the SD/MMC card slot is connected to SSP1 */
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
ssp_dumpssp0gpio("BEFORE SSP1 Initialization");
|
||||
lpc17_configgpio(LPC1766STK_MMC_CS);
|
||||
|
||||
/* Also configure the SD/MMC power GPIO (but leave power off). This really has
|
||||
* nothing to do with SSP, but does belong with other SD/MMC GPIO configuration
|
||||
* settings.
|
||||
*/
|
||||
|
||||
lpc17_configgpio(LPC1766STK_MMC_PWR);
|
||||
ssp_dumpssp0gpio("AFTER SSP1 Initialization");
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
/* If there were any CD detect pins for the LPC1766-STK, this is where
|
||||
* they would be configured.
|
||||
*/
|
||||
#endif
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
|
||||
*
|
||||
* Description:
|
||||
* The external functions, lpc17_ssp0/ssp1select and lpc17_ssp0/ssp1status
|
||||
* must be provided by board-specific logic. They are implementations of the select
|
||||
* and status methods of the SPI interface defined by struct spi_ops_s (see
|
||||
* include/nuttx/spi.h). All other methods (including up_spiinitialize())
|
||||
* are provided by common LPC17xx logic. To use this common SPI logic on your
|
||||
* board:
|
||||
*
|
||||
* 1. Provide logic in lpc17_boardinitialize() to configure SPI/SSP chip select
|
||||
* pins.
|
||||
* 2. Provide lpc17_ssp0/ssp1select() and lpc17_ssp0/ssp1status() functions
|
||||
* in your board-specific logic. These functions will perform chip selection
|
||||
* and status operations using GPIOs in the way your board is configured.
|
||||
* 3. Add a calls to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP0
|
||||
void lpc17_ssp0select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
if (devid == SPIDEV_DISPLAY)
|
||||
{
|
||||
/* Assert/de-assert the CS pin to the card */
|
||||
|
||||
ssp_dumpssp0gpio("lpc17_ssp0select() Entry");
|
||||
lpc17_gpiowrite(LPC1766STK_LCD_CS, !selected);
|
||||
ssp_dumpssp0gpio("lpc17_ssp0select() Exit");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
sspdbg("Returning nothing\n");
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
void lpc17_ssp1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
|
||||
{
|
||||
sspdbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
|
||||
if (devid == SPIDEV_MMCSD)
|
||||
{
|
||||
/* Assert/de-assert the CS pin to the card */
|
||||
|
||||
ssp_dumpssp1gpio("lpc17_ssp1select() Entry");
|
||||
lpc17_gpiowrite(LPC1766STK_MMC_CS, !selected);
|
||||
ssp_dumpssp1gpio("lpc17_ssp1select() Exit");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
sspdbg("Returning SPI_STATUS_PRESENT\n");
|
||||
return SPI_STATUS_PRESENT;
|
||||
}
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_ssp0/1register
|
||||
*
|
||||
* Description:
|
||||
* If the board supports a card detect callback to inform the SPI-based
|
||||
* MMC/SD drvier when an SD card is inserted or removed, then
|
||||
* CONFIG_SPI_CALLBACK should be defined and the following function(s) must
|
||||
* must be implemented. These functiosn implements the registercallback
|
||||
* method of the SPI interface (see include/nuttx/spi.h for details)
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* callback - The funtion to call on the media change
|
||||
* arg - A caller provided value to return with the callback
|
||||
*
|
||||
* Returned Value:
|
||||
* 0 on success; negated errno on failure.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SPI_CALLBACK
|
||||
#ifdef CONFIG_LPC17_SSP0
|
||||
/* If there were any CD detect pins on the LPC1766-STK, this is how the
|
||||
* would be configured.
|
||||
*/
|
||||
|
||||
int lpc17_ssp0register(FAR struct spi_dev_s *dev, spi_mediachange_t callback, void *arg)
|
||||
{
|
||||
/* Save the callback information */
|
||||
|
||||
#if 0
|
||||
g_ssp0callback.callback = callback;
|
||||
g_ssp0callback.arg = arg;
|
||||
|
||||
/* Setup the interrupt */
|
||||
|
||||
spi_cdirqsetup(LPC1766STK_SPICD_IRQ, ssp0_cdinterrupt);
|
||||
#endif
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LPC17_SSP1
|
||||
int lpc17_ssp1register(FAR struct spi_dev_s *dev, spi_mediachange_t callback, void *arg)
|
||||
{
|
||||
/* Save the callback information */
|
||||
|
||||
#if 0
|
||||
g_ssp1callback.callback = callback;
|
||||
g_ssp1callback.arg = arg;
|
||||
|
||||
/* Setup the interrupt */
|
||||
|
||||
spi_cdirqsetup(LPC1766STK_SPICD_IRQ, ssp1_cdinterrupt);
|
||||
#endif
|
||||
return OK;
|
||||
}
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif /* CONFIG_LPC17_SSP0 || CONFIG_LPC17_SSP1 */
|
||||
|
||||
Loading…
Reference in New Issue
Block a user