sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

configs/flipnclick-pic32mz: Apply same LED fix as for flipnclick-sam3x. The LED code is cloned.

Browse Source
This commit is contained in:
Gregory Nutt 2018-01-28 07:42:02 -06:00
parent 67d09e831b
commit 6c277d082f
3 changed files with 8 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
configs/flipnclick-pic32mz/README.txt
View File

@ -218,8 +218,8 @@ LEDs and Buttons
LED_PANIC The system has crashed 2Hz N/C N/C N/C N/C
LED_IDLE MCU is is sleep mode ---- Not used -----
Thus if LED L is glowing on and all other LEDs are off (except LED D which
was left on but is no longer controlled by NuttX and so may be in any
Thus if LED L is glowing faintly and all other LEDs are off (except LED D
which was left on but is no longer controlled by NuttX and so may be in any
state), NuttX has successfully booted and is, apparently, running normally
and taking interrupts. If any of LEDs A-D are statically set, then NuttX
failed to boot and the LED indicates the initialization phase where the

2
configs/flipnclick-pic32mz/include/board.h
View File

@ -240,7 +240,7 @@
#define LED_PANIC 4 /* The system has crashed 2Hz N/C N/C N/C N/C */
#undef LED_IDLE /* MCU is is sleep mode ---- Not used ----- */
/* Thus if LED L is glowing on and all other LEDs are off (except LED D which
/* Thus if LED L is faintly glowing and all other LEDs are off (except LED D which
* was left on but is no longer controlled by NuttX and so may be in any state),
* NuttX has successfully booted and is, apparently, running normally and taking
* interrupts. If any of LEDs A-D are statically set, then NuttX failed to boot

9
configs/flipnclick-pic32mz/src/pic32mz_autoleds.c
View File

@ -57,6 +57,7 @@
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* There are four LEDs on the top, red side of the board. Only one can be
* controlled by software:
*
@ -89,8 +90,8 @@
* LED_PANIC The system has crashed 2Hz N/C N/C N/C N/C
* LED_IDLE MCU is is sleep mode ---- Not used -----
*
* Thus if LED L is glowing on and all other LEDs are off (except LED D
* which was left on but is no longer controlled by NuttX and so may be in
* Thus if LED L is faintly glowing and all other LEDs are off (except LED
* D which was left on but is no longer controlled by NuttX and so may be in
* any state), NuttX has successfully booted and is, apparently, running
* normally and taking interrupts. If any of LEDs A-D are statically set,
* then NuttX failed to boot and the LED indicates the initialization phase
@ -122,7 +123,7 @@ static void board_autoled_setone(int ledndx)
pic32mz_gpiowrite(GPIO_LED_L, ledon[INDEX_LED_L]);
pic32mz_gpiowrite(GPIO_LED_A, ledon[INDEX_LED_A]);
pic32mz_gpiowrite(GPIO_LED_B, ledon[INDEX_LED_B]);
pic32mz_gpiowrite(GPIO_LED_C, ledon[INDEX_LED_D]);
pic32mz_gpiowrite(GPIO_LED_C, ledon[INDEX_LED_C]);
pic32mz_gpiowrite(GPIO_LED_D, ledon[INDEX_LED_D]);
}
@ -175,7 +176,7 @@ void board_autoled_on(int led)
board_autoled_setone(INDEX_LED_B);
break;
case 2:
case 2:
board_autoled_setone(INDEX_LED_C);
break;