Add a OS test kernel build configuration for the STM32F4Discovery board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5775 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
d7c53aa6e4
commit
6c6df1208f
@ -4423,6 +4423,8 @@
|
||||
* drivers/st7567.c/h and include/nuttx/lcd/st7567.h: Driver for
|
||||
the the ST7567 LCD Display Module from Univision Technology Inc.
|
||||
contributed by Manikandan.S (2013-03-22).
|
||||
* configs/zkit-arm-1769: Now supports the ST7567 LCD display\
|
||||
* configs/zkit-arm-1769: Now supports the ST7567 LCD display
|
||||
module. Added an nxhello configurtion for testing (Manikandan.S,
|
||||
2013-03-22).
|
||||
* configs/stm32f4discovery/kostest: Add a kernel mode version
|
||||
of the OS test for the STM32F4Discovery board (2013-03-22).
|
||||
|
||||
@ -112,14 +112,6 @@
|
||||
EXC_RETURN_THREAD_MODE | EXC_RETURN_PROCESS_STACK)
|
||||
#endif
|
||||
|
||||
/* In the kernel build is not selected, then all threads run in privileged thread
|
||||
* mode.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_NUTTX_KERNEL
|
||||
# define EXC_RETURN 0xfffffff9
|
||||
#endif
|
||||
|
||||
/************************Th************************************************************
|
||||
* Inline Functions
|
||||
************************************************************************************/
|
||||
|
||||
@ -41,6 +41,8 @@
|
||||
#include <nuttx/config.h>
|
||||
#include <arch/irq.h>
|
||||
|
||||
#include "exc_return.h"
|
||||
|
||||
/************************************************************************************************
|
||||
* Preprocessor Definitions
|
||||
************************************************************************************************/
|
||||
@ -59,13 +61,6 @@
|
||||
#define IDLE_STACK (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
#define HEAP_BASE (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
|
||||
/* The Cortex-M4 return from interrupt is unusual. We provide the following special
|
||||
* address to the BX instruction. The particular value also forces a return to
|
||||
* thread mode and covers state from the main stack point, the MSP (vs. the MSP).
|
||||
*/
|
||||
|
||||
#define EXC_RETURN 0xfffffff9
|
||||
|
||||
/************************************************************************************************
|
||||
* Global Symbols
|
||||
************************************************************************************************/
|
||||
@ -690,7 +685,7 @@ kinetis_common:
|
||||
* actually occurs with interrupts still disabled).
|
||||
*/
|
||||
|
||||
ldr r14, =EXC_RETURN /* Load the special value */
|
||||
ldr r14, =EXC_RETURN_PRIVTHR /* Load the special value */
|
||||
#endif
|
||||
|
||||
/* Restore the interrupt state */
|
||||
|
||||
@ -60,13 +60,6 @@
|
||||
#define IDLE_STACK (_ebss+CONFIG_IDLETHREAD_STACKSIZE-4)
|
||||
#define HEAP_BASE (_ebss+CONFIG_IDLETHREAD_STACKSIZE-4)
|
||||
|
||||
/* The Cortex-M3 return from interrupt is unusual. We provide the following special
|
||||
* address to the BX instruction. The particular value also forces a return to
|
||||
* thread mode and covers state from the main stack point, the MSP (vs. the MSP).
|
||||
*/
|
||||
|
||||
#define EXC_RETURN 0xfffffff9
|
||||
|
||||
/************************************************************************************
|
||||
* Global Symbols
|
||||
************************************************************************************/
|
||||
@ -288,7 +281,7 @@ lm_irqcommon:
|
||||
* actually occurs with interrupts still disabled).
|
||||
*/
|
||||
|
||||
ldr r14, =EXC_RETURN /* Load the special value */
|
||||
ldr r14, =EXC_RETURN_PRIVTHR /* Load the special value */
|
||||
#endif
|
||||
|
||||
/* Restore the interrupt state */
|
||||
|
||||
@ -64,13 +64,6 @@
|
||||
#define IDLE_STACK (_ebss+CONFIG_IDLETHREAD_STACKSIZE-4)
|
||||
#define HEAP_BASE (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
|
||||
/* The Cortex-M3 return from interrupt is unusual. We provide the following special
|
||||
* address to the BX instruction. The particular value also forces a return to
|
||||
* thread mode and covers state from the main stack point, the MSP (vs. the MSP).
|
||||
*/
|
||||
|
||||
#define EXC_RETURN 0xfffffff9
|
||||
|
||||
/************************************************************************************************
|
||||
* Global Symbols
|
||||
************************************************************************************************/
|
||||
@ -378,7 +371,7 @@ lpc17_common:
|
||||
* actually occurs with interrupts still disabled).
|
||||
*/
|
||||
|
||||
ldr r14, =EXC_RETURN /* Load the special value */
|
||||
ldr r14, =EXC_RETURN_PRIVTHR /* Load the special value */
|
||||
#endif
|
||||
|
||||
/* Restore the interrupt state */
|
||||
|
||||
@ -65,13 +65,6 @@
|
||||
#define IDLE_STACK (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
#define HEAP_BASE (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
|
||||
/* The Cortex-M3 return from interrupt is unusual. We provide the following special
|
||||
* address to the BX instruction. The particular value also forces a return to
|
||||
* thread mode and covers state from the main stack point, the MSP (vs. the MSP).
|
||||
*/
|
||||
|
||||
#define EXC_RETURN 0xfffffff9
|
||||
|
||||
/************************************************************************************************
|
||||
* Global Symbols
|
||||
************************************************************************************************/
|
||||
@ -406,7 +399,7 @@ sam3u_common:
|
||||
* actually occurs with interrupts still disabled).
|
||||
*/
|
||||
|
||||
ldr r14, =EXC_RETURN /* Load the special value */
|
||||
ldr r14, =EXC_RETURN_PRIVTHR /* Load the special value */
|
||||
#endif
|
||||
|
||||
/* Restore the interrupt state */
|
||||
|
||||
@ -48,8 +48,10 @@
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "mpu.h"
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "stm32_mpuinit.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Private Definitions
|
||||
|
||||
@ -43,6 +43,7 @@
|
||||
#include <arch/irq.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "exc_return.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Configuration
|
||||
@ -72,13 +73,6 @@
|
||||
#define IDLE_STACK (_ebss+CONFIG_IDLETHREAD_STACKSIZE-4)
|
||||
#define HEAP_BASE (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
|
||||
/* The Cortex-M3 return from interrupt is unusual. We provide the following special
|
||||
* address to the BX instruction. The particular value also forces a return to
|
||||
* thread mode and covers state from the main stack point, the MSP (vs. the MSP).
|
||||
*/
|
||||
|
||||
#define EXC_RETURN 0xfffffff9
|
||||
|
||||
/************************************************************************************
|
||||
* Global Symbols
|
||||
************************************************************************************/
|
||||
@ -387,7 +381,7 @@ stm32_common:
|
||||
* actually occurs with interrupts still disabled).
|
||||
*/
|
||||
|
||||
ldr r14, =EXC_RETURN /* Load the special value */
|
||||
ldr r14, =EXC_RETURN_PRIVTHR /* Load the special value */
|
||||
#endif
|
||||
|
||||
/* Restore the interrupt state */
|
||||
|
||||
@ -296,7 +296,7 @@ CONFIGURATION
|
||||
----
|
||||
This is identical to the nsh configuration below except that NuttX
|
||||
is built as a kernel-mode, monolithic module and the user applications
|
||||
are built separately. It is recommends to use a special make command;
|
||||
are built separately. Is is recommened to use a special make command;
|
||||
not just 'make' but make with the following two arguments:
|
||||
|
||||
make pass1 pass2
|
||||
@ -307,9 +307,6 @@ CONFIGURATION
|
||||
Make the user-space binaries first (pass1), then make the the kernel-space
|
||||
binaries (pass2)
|
||||
|
||||
There are ordering dependencies so, for example, 'make -j 6' fails.
|
||||
'make -j 6 pass1 pass2' does work fine, however.
|
||||
|
||||
NOTES:
|
||||
|
||||
1. This configuration uses the mconf-based configuration tool. To
|
||||
|
||||
@ -52,11 +52,17 @@ ifeq ($(WINTOOL),y)
|
||||
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
|
||||
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
|
||||
USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
|
||||
USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
|
||||
USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
|
||||
USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
|
||||
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
|
||||
USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
|
||||
USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
|
||||
USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
|
||||
USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
|
||||
endif
|
||||
|
||||
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
|
||||
@ -87,15 +93,15 @@ $(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
|
||||
$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
|
||||
ifeq ($(CONFIG_INTELHEX_BINARY),y)
|
||||
@echo "CP: nuttx_user.hex"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.hex
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_MOTOROLA_SREC),y)
|
||||
@echo "CP: nuttx_user.srec"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.srec
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_RAW_BINARY),y)
|
||||
@echo "CP: nuttx_user.bin"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.bin
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
|
||||
endif
|
||||
|
||||
$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
|
||||
|
||||
@ -35,23 +35,23 @@
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-m$(DELIM)Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}"
|
||||
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
@ -87,7 +87,7 @@ CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
|
||||
@ -107,6 +107,7 @@ void lpc17_boardinitialize(void)
|
||||
up_ledinit();
|
||||
#endif
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_initialize
|
||||
*
|
||||
|
||||
@ -1109,10 +1109,20 @@ Where <subdir> is one of the following:
|
||||
on your system and that you have the full path to the installed genromfs
|
||||
executable in PATH variable (see apps/examples/README.txt)
|
||||
|
||||
ostest:
|
||||
------
|
||||
This configuration directory, performs a simple OS test using
|
||||
apps/examples/ostest.
|
||||
kostest:
|
||||
-------
|
||||
This is identical to the ostest configuration below except that NuttX
|
||||
is built as a kernel-mode, monolithic module and the user applications
|
||||
are built separately. Is is recommened to use a special make command;
|
||||
not just 'make' but make with the following two arguments:
|
||||
|
||||
make pass1 pass2
|
||||
|
||||
In the normal case (just 'make'), make will attempt to build both user-
|
||||
and kernel-mode blobs more or less interleaved. This actual works!
|
||||
However, for me it is very confusing so I prefer the above make command:
|
||||
Make the user-space binaries first (pass1), then make the the kernel-space
|
||||
binaries (pass2)
|
||||
|
||||
NOTES:
|
||||
|
||||
@ -1125,40 +1135,26 @@ Where <subdir> is one of the following:
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. Default toolchain:
|
||||
2. This is the default platform/toolchain in the configuration:
|
||||
|
||||
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X
|
||||
CONFIG_HOST_WINDOWS=y : Windows
|
||||
CONFIG_WINDOWS_CYGWIN=y : Cygwin environment on Windows
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
|
||||
3. By default, this project assumes that you are *NOT* using the DFU
|
||||
bootloader.
|
||||
This is easily changed by modifying the configuration.
|
||||
|
||||
4. If you use the Atollic toolchain, then the FPU test can be enabled in the
|
||||
examples/ostest by adding the following your NuttX configuration file:
|
||||
3. At the end of the build, there will be several files in the top-level
|
||||
NuttX build directory:
|
||||
|
||||
-CONFIG_ARCH_FPU=n : Enable FPU support
|
||||
+CONFIG_ARCH_FPU=y
|
||||
PASS1:
|
||||
nuttx_user.elf - The pass1 user-space ELF file
|
||||
nuttx_user.hex - The pass1 Intel HEX format file (selected in defconfig)
|
||||
User.map - Symbols in the user-space ELF file
|
||||
|
||||
-CONFIG_STM32_CODESOURCERYW=y : Disable the CodeSourcery toolchain
|
||||
+CONFIG_STM32_CODESOURCERYW=n
|
||||
|
||||
-CONFIG_STM32_ATOLLIC_LITE=n : Enable *one* the Atollic toolchains
|
||||
CONFIG_STM32_ATOLLIC_PRO=n
|
||||
-CONFIG_STM32_ATOLLIC_LITE=y : The "Lite" version
|
||||
CONFIG_STM32_ATOLLIC_PRO=n : The "Pro" version
|
||||
|
||||
-CONFIG_INTELHEX_BINARY=y : Suppress generation FLASH download formats
|
||||
+CONFIG_INTELHEX_BINARY=n : (Only necessary with the "Lite" version)
|
||||
|
||||
-CONFIG_HAVE_CXX=y : Suppress generation of C++ code
|
||||
+CONFIG_HAVE_CXX=n : (Only necessary with the "Lite" version)
|
||||
|
||||
-CONFIG_SCHED_WAITPID=y : Enable the waitpid() API needed by the FPU test
|
||||
+CONFIG_SCHED_WAITPID=n
|
||||
|
||||
The FPU test also needs to know the size of the FPU registers save area in
|
||||
bytes (see arch/arm/include/armv7-m/irq_lazyfpu.h):
|
||||
|
||||
-CONFIG_EXAMPLES_OSTEST_FPUSIZE=(4*33)
|
||||
PASS2:
|
||||
nuttx - The pass2 kernel-space ELF file
|
||||
nuttx.hex - The pass2 Intel HEX file (selected in defconfig)
|
||||
System.map - Symbols in the kernel-space ELF file
|
||||
|
||||
nsh:
|
||||
---
|
||||
@ -1427,6 +1423,57 @@ Where <subdir> is one of the following:
|
||||
http://www.nuttx.org/doku.php?id=wiki:graphics:nxgraphics for a description
|
||||
of the fat, flat line bug.
|
||||
|
||||
ostest:
|
||||
------
|
||||
This configuration directory, performs a simple OS test using
|
||||
apps/examples/ostest.
|
||||
|
||||
NOTES:
|
||||
|
||||
1. This configuration uses the mconf-based configuration tool. To
|
||||
change this configuration using that tool, you should:
|
||||
|
||||
a. Build and install the kconfig-mconf tool. See nuttx/README.txt
|
||||
and misc/tools/
|
||||
|
||||
b. Execute 'make menuconfig' in nuttx/ in order to start the
|
||||
reconfiguration process.
|
||||
|
||||
2. Default toolchain:
|
||||
|
||||
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux / Mac OS X
|
||||
|
||||
3. By default, this project assumes that you are *NOT* using the DFU
|
||||
bootloader.
|
||||
|
||||
4. If you use the Atollic toolchain, then the FPU test can be enabled in the
|
||||
examples/ostest by adding the following your NuttX configuration file:
|
||||
|
||||
-CONFIG_ARCH_FPU=n : Enable FPU support
|
||||
+CONFIG_ARCH_FPU=y
|
||||
|
||||
-CONFIG_STM32_CODESOURCERYW=y : Disable the CodeSourcery toolchain
|
||||
+CONFIG_STM32_CODESOURCERYW=n
|
||||
|
||||
-CONFIG_STM32_ATOLLIC_LITE=n : Enable *one* the Atollic toolchains
|
||||
CONFIG_STM32_ATOLLIC_PRO=n
|
||||
-CONFIG_STM32_ATOLLIC_LITE=y : The "Lite" version
|
||||
CONFIG_STM32_ATOLLIC_PRO=n : The "Pro" version
|
||||
|
||||
-CONFIG_INTELHEX_BINARY=y : Suppress generation FLASH download formats
|
||||
+CONFIG_INTELHEX_BINARY=n : (Only necessary with the "Lite" version)
|
||||
|
||||
-CONFIG_HAVE_CXX=y : Suppress generation of C++ code
|
||||
+CONFIG_HAVE_CXX=n : (Only necessary with the "Lite" version)
|
||||
|
||||
-CONFIG_SCHED_WAITPID=y : Enable the waitpid() API needed by the FPU test
|
||||
+CONFIG_SCHED_WAITPID=n
|
||||
|
||||
The FPU test also needs to know the size of the FPU registers save area in
|
||||
bytes (see arch/arm/include/armv7-m/irq_lazyfpu.h):
|
||||
|
||||
-CONFIG_EXAMPLES_OSTEST_FPUSIZE=(4*33)
|
||||
|
||||
pm:
|
||||
--
|
||||
This is a configuration that is used to test STM32 power management, i.e.,
|
||||
|
||||
@ -52,11 +52,17 @@ ifeq ($(WINTOOL),y)
|
||||
USER_LIBPATHS = ${shell for path in $(USERLIBS); do dir=`dirname $(TOPDIR)$(DELIM)$$path`;echo "-L\"`cygpath -w $$dir`\"";done}
|
||||
USER_LDSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
|
||||
USER_LDSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld}"
|
||||
USER_HEXFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.hex}"
|
||||
USER_SRECFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.srec}"
|
||||
USER_BINFILE += "${shell cygpath -w $(TOPDIR)$(DELIM)nuttx_user.bin}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
USER_LIBPATHS = $(addprefix -L$(TOPDIR)$(DELIM),$(dir $(USERLIBS)))
|
||||
USER_LDSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
|
||||
USER_LDSCRIPT += -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)user-space.ld
|
||||
USER_HEXFILE += "$(TOPDIR)$(DELIM)nuttx_user.hex"
|
||||
USER_SRECFILE += "$(TOPDIR)$(DELIM)nuttx_user.srec"
|
||||
USER_BINFILE += "$(TOPDIR)$(DELIM)nuttx_user.bin"
|
||||
endif
|
||||
|
||||
USER_LDFLAGS = --undefined=$(ENTRYPT) --entry=$(ENTRYPT) $(USER_LDSCRIPT)
|
||||
@ -87,15 +93,15 @@ $(TOPDIR)$(DELIM)nuttx_user.elf: nuttx_user.elf
|
||||
$(Q) cp -a nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.elf
|
||||
ifeq ($(CONFIG_INTELHEX_BINARY),y)
|
||||
@echo "CP: nuttx_user.hex"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.hex
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O ihex nuttx_user.elf $(USER_HEXFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_MOTOROLA_SREC),y)
|
||||
@echo "CP: nuttx_user.srec"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.srec
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O srec nuttx_user.elf $(USER_SRECFILE)
|
||||
endif
|
||||
ifeq ($(CONFIG_RAW_BINARY),y)
|
||||
@echo "CP: nuttx_user.bin"
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(TOPDIR)$(DELIM)nuttx_user.bin
|
||||
$(Q) $(OBJCOPY) $(OBJCOPYARGS) -O binary nuttx_user.elf $(USER_BINFILE)
|
||||
endif
|
||||
|
||||
$(TOPDIR)$(DELIM)User.map: nuttx_user.elf
|
||||
|
||||
121
configs/stm32f4discovery/kostest/Make.defs
Normal file
121
configs/stm32f4discovery/kostest/Make.defs
Normal file
@ -0,0 +1,121 @@
|
||||
############################################################################
|
||||
# configs/stm32f4discovery/kostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-m$(DELIM)Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld}"
|
||||
ARCHSCRIPT += -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)kernel-space.ld}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)memory.ld
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
ifeq ($(CONFIG_HOST_WINDOWS),y)
|
||||
HOSTEXEEXT = .exe
|
||||
else
|
||||
HOSTEXEEXT =
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native host tools
|
||||
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||
else
|
||||
# Linux/Cygwin-native host tools
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||
endif
|
||||
|
||||
663
configs/stm32f4discovery/kostest/defconfig
Normal file
663
configs/stm32f4discovery/kostest/defconfig
Normal file
@ -0,0 +1,663 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
CONFIG_BUILD_2PASS=y
|
||||
CONFIG_PASS1_TARGET="all"
|
||||
CONFIG_PASS1_BUILDIR="configs/stm32f4discovery/kernel"
|
||||
CONFIG_PASS1_OBJECT=""
|
||||
CONFIG_NUTTX_KERNEL=y
|
||||
CONFIG_NUTTX_USERSPACE=0x08018000
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
# CONFIG_ARCH_CHIP_SAM3U is not set
|
||||
CONFIG_ARCH_CHIP_STM32=y
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM4=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="stm32"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_CMNVECTOR=y
|
||||
# CONFIG_ARMV7M_CMNVECTOR is not set
|
||||
# CONFIG_ARCH_FPU is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
CONFIG_ARMV7M_MPU=y
|
||||
CONFIG_ARMV7M_MPU_NREGIONS=8
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set
|
||||
CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set
|
||||
# CONFIG_SERIAL_TERMIOS is not set
|
||||
|
||||
#
|
||||
# STM32 Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_STM32F100C8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100R8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RD is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100RE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100V8 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VD is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F100VE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103RET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VCT6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103VET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F103ZET6 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F105VBT7 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F107VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F207IG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F302VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303CC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303RC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VB is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F303VC is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405RG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405VG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F405ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407VE is not set
|
||||
CONFIG_ARCH_CHIP_STM32F407VG=y
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407ZG is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IE is not set
|
||||
# CONFIG_ARCH_CHIP_STM32F407IG is not set
|
||||
CONFIG_STM32_STM32F40XX=y
|
||||
# CONFIG_STM32_DFU is not set
|
||||
|
||||
#
|
||||
# STM32 Peripheral Support
|
||||
#
|
||||
# CONFIG_STM32_ADC1 is not set
|
||||
# CONFIG_STM32_ADC2 is not set
|
||||
# CONFIG_STM32_ADC3 is not set
|
||||
# CONFIG_STM32_BKPSRAM is not set
|
||||
# CONFIG_STM32_CAN1 is not set
|
||||
# CONFIG_STM32_CAN2 is not set
|
||||
# CONFIG_STM32_CCMDATARAM is not set
|
||||
# CONFIG_STM32_CRC is not set
|
||||
# CONFIG_STM32_CRYP is not set
|
||||
# CONFIG_STM32_DMA1 is not set
|
||||
# CONFIG_STM32_DMA2 is not set
|
||||
# CONFIG_STM32_DAC1 is not set
|
||||
# CONFIG_STM32_DAC2 is not set
|
||||
# CONFIG_STM32_DCMI is not set
|
||||
# CONFIG_STM32_ETHMAC is not set
|
||||
# CONFIG_STM32_FSMC is not set
|
||||
# CONFIG_STM32_HASH is not set
|
||||
# CONFIG_STM32_I2C1 is not set
|
||||
# CONFIG_STM32_I2C2 is not set
|
||||
# CONFIG_STM32_I2C3 is not set
|
||||
# CONFIG_STM32_IWDG is not set
|
||||
# CONFIG_STM32_OTGFS is not set
|
||||
# CONFIG_STM32_OTGHS is not set
|
||||
# CONFIG_STM32_PWR is not set
|
||||
# CONFIG_STM32_RNG is not set
|
||||
# CONFIG_STM32_SDIO is not set
|
||||
# CONFIG_STM32_SPI1 is not set
|
||||
# CONFIG_STM32_SPI2 is not set
|
||||
# CONFIG_STM32_SPI3 is not set
|
||||
CONFIG_STM32_SYSCFG=y
|
||||
# CONFIG_STM32_TIM1 is not set
|
||||
# CONFIG_STM32_TIM2 is not set
|
||||
# CONFIG_STM32_TIM3 is not set
|
||||
# CONFIG_STM32_TIM4 is not set
|
||||
# CONFIG_STM32_TIM5 is not set
|
||||
# CONFIG_STM32_TIM6 is not set
|
||||
# CONFIG_STM32_TIM7 is not set
|
||||
# CONFIG_STM32_TIM8 is not set
|
||||
# CONFIG_STM32_TIM9 is not set
|
||||
# CONFIG_STM32_TIM10 is not set
|
||||
# CONFIG_STM32_TIM11 is not set
|
||||
# CONFIG_STM32_TIM12 is not set
|
||||
# CONFIG_STM32_TIM13 is not set
|
||||
# CONFIG_STM32_TIM14 is not set
|
||||
# CONFIG_STM32_USART1 is not set
|
||||
CONFIG_STM32_USART2=y
|
||||
# CONFIG_STM32_USART3 is not set
|
||||
# CONFIG_STM32_UART4 is not set
|
||||
# CONFIG_STM32_UART5 is not set
|
||||
# CONFIG_STM32_USART6 is not set
|
||||
# CONFIG_STM32_WWDG is not set
|
||||
|
||||
#
|
||||
# Alternate Pin Mapping
|
||||
#
|
||||
# CONFIG_STM32_FLASH_PREFETCH is not set
|
||||
# CONFIG_STM32_JTAG_DISABLE is not set
|
||||
# CONFIG_STM32_JTAG_FULL_ENABLE is not set
|
||||
# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set
|
||||
CONFIG_STM32_JTAG_SW_ENABLE=y
|
||||
# CONFIG_STM32_FORCEPOWER is not set
|
||||
# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set
|
||||
# CONFIG_STM32_CCMEXCLUDE is not set
|
||||
CONFIG_STM32_USART=y
|
||||
|
||||
#
|
||||
# U[S]ART Configuration
|
||||
#
|
||||
# CONFIG_USART2_RS485 is not set
|
||||
# CONFIG_STM32_USART_SINGLEWIRE is not set
|
||||
|
||||
#
|
||||
# USB Host Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=16717
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=114688
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_STM32F4_DISCOVERY=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="stm32f4discovery"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
# CONFIG_ARCH_BUTTONS is not set
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
CONFIG_BOARD_INITIALIZE=y
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2013
|
||||
CONFIG_START_MONTH=3
|
||||
CONFIG_START_DAY=22
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# System call configuration
|
||||
#
|
||||
CONFIG_SYS_RESERVED=8
|
||||
CONFIG_SYS_NNEST=2
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_ARCH_HAVE_I2CRESET=y
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART2=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_USART2_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART2 Configuration
|
||||
#
|
||||
CONFIG_USART2_RXBUFSIZE=128
|
||||
CONFIG_USART2_TXBUFSIZE=128
|
||||
CONFIG_USART2_BAUD=115200
|
||||
CONFIG_USART2_BITS=8
|
||||
CONFIG_USART2_PARITY=0
|
||||
CONFIG_USART2_2STOP=0
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
CONFIG_MM_MULTIHEAP=y
|
||||
CONFIG_MM_KERNEL_HEAP=y
|
||||
CONFIG_MM_KERNEL_HEAPSIZE=8192
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
CONFIG_EXAMPLES_OSTEST=y
|
||||
# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
75
configs/stm32f4discovery/kostest/setenv.sh
Executable file
75
configs/stm32f4discovery/kostest/setenv.sh
Executable file
@ -0,0 +1,75 @@
|
||||
#!/bin/bash
|
||||
# configs/stm32f4discovery/kostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
@ -35,21 +35,21 @@
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-m$(DELIM)Toolchain.defs
|
||||
|
||||
LDSCRIPT = ld.script
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
@ -85,7 +85,7 @@ CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
@ -112,11 +112,11 @@ endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native host tools
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||
else
|
||||
# Linux/Cygwin-native host tools
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||
endif
|
||||
|
||||
|
||||
@ -246,6 +246,8 @@ CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
############################################################################
|
||||
# configs/stm32f4discovery/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
@ -72,7 +72,7 @@ ifeq ($(CONFIG_WATCHDOG),y)
|
||||
CSRCS += up_watchdog.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
||||
ifeq ($(CONFIG_NSH_LIBRARY),y)
|
||||
CSRCS += up_nsh.c
|
||||
endif
|
||||
|
||||
|
||||
@ -280,6 +280,25 @@ void up_ledpminitialize(void);
|
||||
void up_pmbuttons(void);
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Name: nsh_archinitialize
|
||||
*
|
||||
* Description:
|
||||
* Perform architecture specific initialization for NSH.
|
||||
*
|
||||
* CONFIG_NSH_ARCHINIT=y :
|
||||
* Called from the NSH library
|
||||
*
|
||||
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
|
||||
* CONFIG_NSH_ARCHINIT=n :
|
||||
* Called from board_initialize().
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_NSH_LIBRARY
|
||||
int nsh_archinitialize(void);
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __CONFIGS_STM32F4DISCOVERY_SRC_STM32F4DISCOVERY_INTERNAL_H */
|
||||
|
||||
|
||||
@ -101,3 +101,31 @@ void stm32_boardinitialize(void)
|
||||
up_ledinit();
|
||||
#endif
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: board_initialize
|
||||
*
|
||||
* Description:
|
||||
* If CONFIG_BOARD_INITIALIZE is selected, then an additional
|
||||
* initialization call will be performed in the boot-up sequence to a
|
||||
* function called board_initialize(). board_initialize() will be
|
||||
* called immediately after up_intiialize() is called and just before the
|
||||
* initial application is started. This additional initialization phase
|
||||
* may be used, for example, to initialize board-specific device drivers.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_BOARD_INITIALIZE
|
||||
void board_initialize(void)
|
||||
{
|
||||
/* Perform NSH initialization here instead of from the NSH. This
|
||||
* alternative NSH initialization is necessary when NSH is ran in user-space
|
||||
* but the initialization function must run in kernel space.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_NSH_LIBRARY) && !defined(CONFIG_NSH_ARCHINIT)
|
||||
(void)nsh_archinitialize();
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
@ -101,13 +101,13 @@
|
||||
/* Debug ********************************************************************/
|
||||
|
||||
#ifdef CONFIG_CPP_HAVE_VARARGS
|
||||
# ifdef CONFIG_DEBUG
|
||||
# if defined(CONFIG_DEBUG) || !defined(CONFIG_NSH_ARCHINIT)
|
||||
# define message(...) lowsyslog(__VA_ARGS__)
|
||||
# else
|
||||
# define message(...) printf(__VA_ARGS__)
|
||||
# endif
|
||||
#else
|
||||
# ifdef CONFIG_DEBUG
|
||||
# if defined(CONFIG_DEBUG) || !defined(CONFIG_NSH_ARCHINIT)
|
||||
# define message lowsyslog
|
||||
# else
|
||||
# define message printf
|
||||
@ -124,6 +124,13 @@
|
||||
* Description:
|
||||
* Perform architecture specific initialization
|
||||
*
|
||||
* CONFIG_NSH_ARCHINIT=y :
|
||||
* Called from the NSH library
|
||||
*
|
||||
* CONFIG_BOARD_INITIALIZE=y, CONFIG_NSH_LIBRARY=y, &&
|
||||
* CONFIG_NSH_ARCHINIT=n :
|
||||
* Called from board_initialize().
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
int nsh_archinitialize(void)
|
||||
|
||||
@ -181,7 +181,7 @@ extern "C"
|
||||
****************************************************************************/
|
||||
|
||||
#if defined(CONFIG_NUTTX_KERNEL) && !defined(__KERNEL__)
|
||||
void task_startup(main_t entrypt, int argc, FAR char *argv[]);
|
||||
void task_startup(main_t entrypt, int argc, FAR char *argv[]) noreturn_function;
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
|
||||
Loading…
Reference in New Issue
Block a user