Add LPC313x header files

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2407 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2009-12-21 22:10:13 +00:00
parent d3550aa325
commit 6d5f497b01
2 changed files with 379 additions and 1 deletions

View File

@ -109,7 +109,7 @@
/* 0x00000280 Reserved */ /* 0x00000280 Reserved */
#define LPC313X_APB4_DMA_OFFSET 0x00000000 /* DMA */ #define LPC313X_APB4_DMA_OFFSET 0x00000000 /* DMA */
#define LPC313X_APB4_NAND_OFFSET 0x0000080 /* NAND FLASH Controller */ #define LPC313X_APB4_NAND_OFFSET 0x00000800 /* NAND FLASH Controller */
/* 0x00001000 Reserved */ /* 0x00001000 Reserved */
/************************************************************************************ /************************************************************************************

View File

@ -0,0 +1,378 @@
/************************************************************************************************
* arch/arm/src/lpc313x/lpc313x_nand.h
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC313X_NAND_H
#define __ARCH_ARM_SRC_LPC313X_NAND_H
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include "lpc313x_memorymap.h"
/************************************************************************************************
* Pre-processor Definitions
************************************************************************************************/
/* NAND FLASH controller register base address offset into the APB4 domain **********************/
#define LPC313X_NAND_VBASE (LPC313X_APB4_VSECTION+LPC313X_APB4_NAND_OFFSET)
#define LPC313X_NAND_PBASE (LPC313X_APB4_PSECTION+LPC313X_APB4_NAND_OFFSET)
/* NAND FLASH controller register offsets (with respect to the base of the APB4 domain) *********/
#define LPC313X_NAND_IRQSTATUS1_OFFSET 0x00 /* Interrrupt status register (first 32-bits) */
#define LPC313X_NAND_IRQMASK1_OFFSET 0x04 /* Interrupt mask register (first 32-bits) */
#define LPC313X_NAND_IRQSTATUSRAW1_OFFSET 0x08 /* Unmasked register status (first 32-bits) */
#define LPC313X_NAND_CONFIG_OFFSET 0x0c /* NAND Flash controller configuration register */
#define LPC313X_NAND_IOCONFIG_OFFSET 0x10 /* Default value settings for IO signals */
#define LPC313X_NAND_TIMING1_OFFSET 0x14 /* First NAND FLASH controller timing register */
#define LPC313X_NAND_TIMING2_OFFSET 0x18 /* Second NAND FLASH controller timing register */
#define LPC313X_NAND_SETCMD_OFFSET 0x20 /* NAND FLASH device command register */
#define LPC313X_NAND_SETADDR_OFFSET 0x24 /* NAND FLASH device address register */
#define LPC313X_NAND_WRITEDATA_OFFSET 0x28 /* NAND FLASH device write data register */
#define LPC313X_NAND_SETCE_OFFSET 0x2c /* Set all CE and WP_n signals */
#define LPC313X_NAND_READDATA_OFFSET 0x30 /* NAND FLASH device read data register */
#define LPC313X_NAND_CHECKSTS_OFFSET 0x34 /* Check status of interrupts */
#define LPC313X_NAND_CONTROLFLOW_OFFSET 0x38 /* Commands to read and write pages */
#define LPC313X_NAND_GPIO1_OFFSET 0x40 /* Program IO pins that can be used as GPIO */
#define LPC313X_NAND_GPIO2_OFFSET 0x44 /* Program IO pins that can be used as GPIO */
#define LPC313X_NAND_IRQSTATUS2_OFFSET 0x48 /* Interrrupt status register (second 32-bits) */
#define LPC313X_NAND_IRQMASK3_OFFSET 0x4c /* Interrupt mask register (second 32-bits) */
#define LPC313X_NAND_IRQSTATUSRAW2_OFFSET 0x50 /* Unmasked register status (second 32-bits) */
#define LPC313X_NAND_ECCERRSTATUS_OFFSET 0x78 /* ECC error status register */
/* NAND FLASH controller register (virtual) addresses *******************************************/
#define LPC313X_NAND_IRQSTATUS1 (LPC313X_NAND_VBASE+LPC313X_NAND_IRQSTATUS1_OFFSET)
#define LPC313X_NAND_IRQMASK1 (LPC313X_NAND_VBASE+LPC313X_NAND_IRQMASK1_OFFSET)
#define LPC313X_NAND_IRQSTATUSRAW1 (LPC313X_NAND_VBASE+LPC313X_NAND_IRQSTATUSRAW1_OFFSET)
#define LPC313X_NAND_CONFIG (LPC313X_NAND_VBASE+LPC313X_NAND_CONFIG_OFFSET)
#define LPC313X_NAND_IOCONFIG (LPC313X_NAND_VBASE+LPC313X_NAND_IOCONFIG_OFFSET)
#define LPC313X_NAND_TIMING1 (LPC313X_NAND_VBASE+LPC313X_NAND_TIMING1_OFFSET)
#define LPC313X_NAND_TIMING2 (LPC313X_NAND_VBASE+LPC313X_NAND_TIMING2_OFFSET)
#define LPC313X_NAND_SETCMD (LPC313X_NAND_VBASE+LPC313X_NAND_SETCMD_OFFSET)
#define LPC313X_NAND_SETADDR (LPC313X_NAND_VBASE+LPC313X_NAND_SETADDR_OFFSET)
#define LPC313X_NAND_WRITEDATA (LPC313X_NAND_VBASE+LPC313X_NAND_WRITEDATA_OFFSET)
#define LPC313X_NAND_SETCE (LPC313X_NAND_VBASE+LPC313X_NAND_SETCE_OFFSET)
#define LPC313X_NAND_READDATA (LPC313X_NAND_VBASE+LPC313X_NAND_READDATA_OFFSET)
#define LPC313X_NAND_CHECKSTS (LPC313X_NAND_VBASE+LPC313X_NAND_CHECKSTS_OFFSET)
#define LPC313X_NAND_CONTROLFLOW (LPC313X_NAND_VBASE+LPC313X_NAND_CONTROLFLOW_OFFSET)
#define LPC313X_NAND_GPIO1 (LPC313X_NAND_VBASE+LPC313X_NAND_GPIO1_OFFSET)
#define LPC313X_NAND_GPIO2 (LPC313X_NAND_VBASE+LPC313X_NAND_GPIO2_OFFSET)
#define LPC313X_NAND_IRQSTATUS2 (LPC313X_NAND_VBASE+LPC313X_NAND_IRQSTATUS2_OFFSET)
#define LPC313X_NAND_IRQMASK3 (LPC313X_NAND_VBASE+LPC313X_NAND_IRQMASK3_OFFSET)
#define LPC313X_NAND_IRQSTATUSRAW2 (LPC313X_NAND_VBASE+LPC313X_NAND_IRQSTATUSRAW2_OFFSET)
#define LPC313X_NAND_ECCERRSTATUS (LPC313X_NAND_VBASE+LPC313X_NAND_ECCERRSTATUS_OFFSET)
/* NAND FLASH controller register bit definitions ***********************************************/
/* NandIRQStatus1 register description (NandIRQStatus1, address 0x17000800) */
#define NAND_IRQSTATUS1_MNANDRYBN3 (1 << 31) /* Bit 31: mNAND_RYBN3 positive edge */
#define NAND_IRQSTATUS1_MNANDRYBN2 (1 << 30) /* Bit 30: mNAND_RYBN2 positive edge */
#define NAND_IRQSTATUS1_MNANDRYBN1 (1 << 29) /* Bit 29: mNAND_RYBN1 positive edge */
#define NAND_IRQSTATUS1_MNANDRYBN0 (1 << 28) /* Bit 28: mNAND_RYBN0 positive edge */
#define NAND_IRQSTATUS1_RAM1ERASED (1 << 27) /* Bit 27: RAM 1 erased */
#define NAND_IRQSTATUS1_RAM0ERASED (1 << 26) /* Bit 26: RAM 0 erased */
#define NAND_IRQSTATUS1_WRPG1DONE (1 << 25) /* Bit 25: Write page 1 done */
#define NAND_IRQSTATUS1_WRPG0DONE (1 << 24) /* Bit 24: Write page 0 done */
#define NAND_IRQSTATUS1_RDPG1DONE (1 << 23) /* Bit 23: Read page 1 done */
#define NAND_IRQSTATUS1_RDPG0DONE (1 << 22) /* Bit 22: Read page 0 done */
#define NAND_IRQSTATUS1_RAM0DECODE (1 << 21) /* Bit 21: RAM 0 decoded */
#define NAND_IRQSTATUS1_RAM0ENCODE (1 << 20) /* Bit 20: RAM 0 encoded */
#define NAND_IRQSTATUS1_RAM1DECODE (1 << 19) /* Bit 19: RAM 1 decoded */
#define NAND_IRQSTATUS1_RAM1ENCODE (1 << 18) /* Bit 18: RAM 1 encoded */
#define NAND_IRQSTATUS1_RAM00ERRS (1 << 17) /* Bit 17: RAM 0 decoded with 0 errors */
#define NAND_IRQSTATUS1_RAM01ERR (1 << 16) /* Bit 16: RAM 0 decoded with 1 error (depends on mode) */
#define NAND_IRQSTATUS1_RAM02ERR (1 << 15) /* Bit 15: RAM 0 decoded with 2 error */
#define NAND_IRQSTATUS1_RAM03ERR (1 << 14) /* Bit 14: RAM 0 decoded with 3 error */
#define NAND_IRQSTATUS1_RAM04ERR (1 << 13) /* Bit 13: RAM 0 decoded with 4 error */
#define NAND_IRQSTATUS1_RAM05ERR (1 << 12) /* Bit 12: RAM 0 decoded with 5 error */
#define NAND_IRQSTATUS1_RAM0UNCORR (1 << 11) /* Bit 11: RAM 0 uncorrectable */
#define NAND_IRQSTATUS1_RAM10ERR (1 << 10) /* Bit 10: RAM 1 decoded with 0 errors */
#define NAND_IRQSTATUS1_RAM11ERR (1 << 9) /* Bit 9: RAM 1 decoded with 1 error (depends on mode) */
#define NAND_IRQSTATUS1_RAM12ERR (1 << 8) /* Bit 8: RAM 1 decoded with 2 error */
#define NAND_IRQSTATUS1_RAM13ERR (1 << 7) /* Bit 7: RAM 1 decoded with 3 error */
#define NAND_IRQSTATUS1_RAM14ERR (1 << 6) /* Bit 6: RAM 1 decoded with 4 error */
#define NAND_IRQSTATUS1_RAM15ERR (1 << 5) /* Bit 5: RAM 1 decoded with 5 error */
#define NAND_IRQSTATUS1_RAM1UNCORR (1 << 4) /* Bit 4: RAM 1 uncorrectable */
/* NandIRQMask1 register description (NandIRQMask1, address 0x17000804) */
#define NAND_IRQIRQMASK1_MNANDRYBN3 (1 << 31) /* Bit 31: mNAND_RYBN3 positive edge */
#define NAND_IRQIRQMASK1_MNANDRYBN2 (1 << 30) /* Bit 30: mNAND_RYBN2 positive edge */
#define NAND_IRQIRQMASK1_MNANDRYBN1 (1 << 29) /* Bit 29: mNAND_RYBN1 positive edge */
#define NAND_IRQIRQMASK1_MNANDRYBN0 (1 << 28) /* Bit 28: mNAND_RYBN0 positive edge */
#define NAND_IRQIRQMASK1_RAM1ERASED (1 << 27) /* Bit 27: RAM 1 erased */
#define NAND_IRQIRQMASK1_RAM0ERASED (1 << 26) /* Bit 26: RAM 0 erased */
#define NAND_IRQIRQMASK1_WRPG1DONE (1 << 25) /* Bit 25: Write page 1 done */
#define NAND_IRQIRQMASK1_WRPG0DONE (1 << 24) /* Bit 24: Write page 0 done */
#define NAND_IRQIRQMASK1_RDPG1DONE (1 << 23) /* Bit 23: Read page 1 done */
#define NAND_IRQIRQMASK1_RDPG0DONE (1 << 22) /* Bit 22: Read page 0 done */
#define NAND_IRQIRQMASK1_RAM0DECODE (1 << 21) /* Bit 21: RAM 0 decoded */
#define NAND_IRQIRQMASK1_RAM0ENCODE (1 << 20) /* Bit 20: RAM 0 encoded */
#define NAND_IRQIRQMASK1_RAM1DECODE (1 << 19) /* Bit 19: RAM 1 decoded */
#define NAND_IRQIRQMASK1_RAM1ENCODE (1 << 18) /* Bit 18: RAM 1 encoded */
#define NAND_IRQIRQMASK1_RAM00ERRS (1 << 17) /* Bit 17: RAM 0 decoded with 0 errors */
#define NAND_IRQIRQMASK1_RAM01ERR (1 << 16) /* Bit 16: RAM 0 decoded with 1 error (depends on mode) */
#define NAND_IRQIRQMASK1_RAM02ERR (1 << 15) /* Bit 15: RAM 0 decoded with 2 error */
#define NAND_IRQIRQMASK1_RAM03ERR (1 << 14) /* Bit 14: RAM 0 decoded with 3 error */
#define NAND_IRQIRQMASK1_RAM04ERR (1 << 13) /* Bit 13: RAM 0 decoded with 4 error */
#define NAND_IRQIRQMASK1_RAM05ERR (1 << 12) /* Bit 12: RAM 0 decoded with 5 error */
#define NAND_IRQIRQMASK1_RAM0UNCORR (1 << 11) /* Bit 11: RAM 0 uncorrectable */
#define NAND_IRQIRQMASK1_RAM10ERR (1 << 10) /* Bit 10: RAM 1 decoded with 0 errors */
#define NAND_IRQIRQMASK1_RAM11ERR (1 << 9) /* Bit 9: RAM 1 decoded with 1 error (depends on mode) */
#define NAND_IRQIRQMASK1_RAM12ERR (1 << 8) /* Bit 8: RAM 1 decoded with 2 error */
#define NAND_IRQIRQMASK1_RAM13ERR (1 << 7) /* Bit 7: RAM 1 decoded with 3 error */
#define NAND_IRQIRQMASK1_RAM14ERR (1 << 6) /* Bit 6: RAM 1 decoded with 4 error */
#define NAND_IRQIRQMASK1_RAM15ERR (1 << 5) /* Bit 5: RAM 1 decoded with 5 error */
#define NAND_IRQIRQMASK1_RAM1UNCORR (1 << 4) /* Bit 4: RAM 1 uncorrectable */
/* NandIRQStatusRaw1 register description (NandIRQStatusRaw1, address 0x17000808) */
#define NAND_IRQSTATUSRAW1_MNANDRYBN3 (1 << 31) /* Bit 31: mNAND_RYBN3 positive edge */
#define NAND_IRQSTATUSRAW1_MNANDRYBN2 (1 << 30) /* Bit 30: mNAND_RYBN2 positive edge */
#define NAND_IRQSTATUSRAW1_MNANDRYBN1 (1 << 29) /* Bit 29: mNAND_RYBN1 positive edge */
#define NAND_IRQSTATUSRAW1_MNANDRYBN0 (1 << 28) /* Bit 28: mNAND_RYBN0 positive edge */
#define NAND_IRQSTATUSRAW1_RAM1ERASED (1 << 27) /* Bit 27: RAM 1 erased */
#define NAND_IRQSTATUSRAW1_RAM0ERASED (1 << 26) /* Bit 26: RAM 0 erased */
#define NAND_IRQSTATUSRAW1_WRPG1DONE (1 << 25) /* Bit 25: Write page 1 done */
#define NAND_IRQSTATUSRAW1_WRPG0DONE (1 << 24) /* Bit 24: Write page 0 done */
#define NAND_IRQSTATUSRAW1_RDPG1DONE (1 << 23) /* Bit 23: Read page 1 done */
#define NAND_IRQSTATUSRAW1_RDPG0DONE (1 << 22) /* Bit 22: Read page 0 done */
#define NAND_IRQSTATUSRAW1_RAM0DECODE (1 << 21) /* Bit 21: RAM 0 decoded */
#define NAND_IRQSTATUSRAW1_RAM0ENCODE (1 << 20) /* Bit 20: RAM 0 encoded */
#define NAND_IRQSTATUSRAW1_RAM1DECODE (1 << 19) /* Bit 19: RAM 1 decoded */
#define NAND_IRQSTATUSRAW1_RAM1ENCODE (1 << 18) /* Bit 18: RAM 1 encoded */
#define NAND_IRQSTATUSRAW1_RAM00ERRS (1 << 17) /* Bit 17: RAM 0 decoded with 0 errors */
#define NAND_IRQSTATUSRAW1_RAM01ERR (1 << 16) /* Bit 16: RAM 0 decoded with 1 error (depends on mode) */
#define NAND_IRQSTATUSRAW1_RAM02ERR (1 << 15) /* Bit 15: RAM 0 decoded with 2 error */
#define NAND_IRQSTATUSRAW1_RAM03ERR (1 << 14) /* Bit 14: RAM 0 decoded with 3 error */
#define NAND_IRQSTATUSRAW1_RAM04ERR (1 << 13) /* Bit 13: RAM 0 decoded with 4 error */
#define NAND_IRQSTATUSRAW1_RAM05ERR (1 << 12) /* Bit 12: RAM 0 decoded with 5 error */
#define NAND_IRQSTATUSRAW1_RAM0UNCORR (1 << 11) /* Bit 11: RAM 0 uncorrectable */
#define NAND_IRQSTATUSRAW1_RAM10ERR (1 << 10) /* Bit 10: RAM 1 decoded with 0 errors */
#define NAND_IRQSTATUSRAW1_RAM11ERR (1 << 9) /* Bit 9: RAM 1 decoded with 1 error (depends on mode) */
#define NAND_IRQSTATUSRAW1_RAM12ERR (1 << 8) /* Bit 8: RAM 1 decoded with 2 error */
#define NAND_IRQSTATUSRAW1_RAM13ERR (1 << 7) /* Bit 7: RAM 1 decoded with 3 error */
#define NAND_IRQSTATUSRAW1_RAM14ERR (1 << 6) /* Bit 6: RAM 1 decoded with 4 error */
#define NAND_IRQSTATUSRAW1_RAM15ERR (1 << 5) /* Bit 5: RAM 1 decoded with 5 error */
#define NAND_IRQSTATUSRAW1_RAM1UNCORR (1 << 4) /* Bit 4: RAM 1 uncorrectable */
/* NandConfig register description (NandConfig, address 0x1700080c) */
#define NAND_CONFIG_ECC_MODE (1 << 12) /* Bit 12: ECC mode 0 */
#define NAND_CONFIG_TL_SHIFT (10) /* Bits 10-11: Transfer limit */
#define NAND_CONFIG_TL_MASK (3 <<NAND_CONFIG_TL_SHIFT)
# define NAND_CONFIG_TL_528 (0 <<NAND_CONFIG_TL_SHIFT)
# define NAND_CONFIG_TL_516 (1 <<NAND_CONFIG_TL_SHIFT)
# define NAND_CONFIG_TL_512 (2 <<NAND_CONFIG_TL_SHIFT)
#define NAND_CONFIG_DC (1 << 8) /* Bit 8: Deactivate CE enable */
#define NAND_CONFIG_M (1 << 7) /* Bit 7: 512 mode */
#define NAND_CONFIG_LC_SHIFT (5) /* Bits 5-6: Latency Configuration */
#define NAND_CONFIG_LC_MASK (3 << NAND_CONFIG_LC_SHIFT)
# define NAND_CONFIG_LC_0WAITSTATES (0 << NAND_CONFIG_LC_SHIFT)
# define NAND_CONFIG_LC_1WAITSTATES (1 << NAND_CONFIG_LC_SHIFT)
# define NAND_CONFIG_LC_2WAITSTATES (2 << NAND_CONFIG_LC_SHIFT)
#define NAND_CONFIG_ES (1 << 4) /* Bit 4: Endianess setting */
#define NAND_CONFIG_DE (1 << 3) /* Bit 3: DMA external enable */
#define NAND_CONFIG_WD (1 << 1) /* Bit 1: Wide device */
#define NAND_CONFIG_EC (1 << 0) /* Bit 0: ECC on */
/* NandIOConfig register description (NandIOConfig, address 0x1700 0810) */
#define NAND_IOCONFIG_NI (1 << 24) /* Bit 24: Nand IO drive default */
#define NAND_IOCONFIG_DN_SHIFT (8) /* Bits 8-23: Data to NAND default */
#define NAND_IOCONFIG_DN_MASK (0xffff << NAND_IOCONFIG_DN_SHIFT)
#define NAND_IOCONFIG_CD_SHIFT (6) /* Bits 6-7: CLE default */
#define NAND_IOCONFIG_CD_MASK (3 << NAND_IOCONFIG_CD_SHIFT)
#define NAND_IOCONFIG_AD_SHIFT (4) /* Bits 4-5: ALE default */
#define NAND_IOCONFIG_AD_MASK (3 << NAND_IOCONFIG_AD_SHIFT)
#define NAND_IOCONFIG_WD_SHIFT (2) /* Bits 2-3: WE_n default */
#define NAND_IOCONFIG_WD_MASK (3 << NAND_IOCONFIG_WD_SHIFT)
#define NAND_IOCONFIG_RD_SHIFT (0) /* Bits 0-1: RE_n default */
#define NAND_IOCONFIG_RD_MASK (3 << NAND_IOCONFIG_RD_SHIFT)
/* NandTiming1 register description (NandTiming1, address 0x17000814) */
#define NAND_TIMING1_TSRD_SHIFT (20) /* Bits 20-21: Single data input delay */
#define NAND_TIMING1_TSRD_MASK (3 << NAND_TIMING1_TSRD_SHIFT
#define NAND_TIMING1_TALS_SHIFT (16) /* Bits 16-18: Address setup time */
#define NAND_TIMING1_TALS_MASK (7 << NAND_TIMING1_TALS_SHIFT
#define NAND_TIMING1_TALH_SHIFT (12) /* Bits 12-14: Address hold time */
#define NAND_TIMING1_TALH_MASK (7 << NAND_TIMING1_TALH_SHIFT
#define NAND_TIMING1_TCLS_SHIFT (4) /* Bits 4-6: Command setup time */
#define NAND_TIMING1_TCLS_MASK (7 << NAND_TIMING1_TCLS_SHIFT
#define NAND_TIMING1_TCLH_SHIFT (0) /* Bits 0-2: Command hold time */
#define NAND_TIMING1_TCLH_MASK (7 << NAND_TIMING1_TCLH_SHIFT
/* NandTiming2 register description (NandTiming2, address 0x17000818) */
#define NAND_TIMING2_TDRD_SHIFT (28) /* Bits 28-30: Data input delay */
#define NAND_TIMING2_TDRD_MASK (7 << NAND_TIMING2_TDRD_SHIFT)
#define NAND_TIMING2_TEBIDEL_SHIFT (24) /* Bits 24-26: EBI delay time */
#define NAND_TIMING2_TEBIDEL_MASK (7 << NAND_TIMING2_TEBIDEL_SHIFT)
#define NAND_TIMING2_TCH_SHIFT (22) /* Bits 20-22: Chip select hold time */
#define NAND_TIMING2_TCH_MASK (7 << NAND_TIMING2_TCH_SHIFT)
#define NAND_TIMING2_TCS_SHIFT (16) /* Bits 16-18: Chip select setup time */
#define NAND_TIMING2_TCS_MASK (7 << NAND_TIMING2_TCS_SHIFT)
#define NAND_TIMING2_TREH_SHIFT (12) /* Bits 12-14: Read enable high hold */
#define NAND_TIMING2_TREH_MASK (7 << NAND_TIMING2_TREH_SHIFT)
#define NAND_TIMING2_TRP_SHIFT (8) /* Bits 8-10: Read enable pulse width */
#define NAND_TIMING2_TRP_MASK (7 << NAND_TIMING2_TRP_SHIFT)
#define NAND_TIMING2_TWH_SHIFT (4) /* Bits 4-6: Write enable high hold */
#define NAND_TIMING2_TWH_MASK (7 << NAND_TIMING2_TWH_SHIFT)
#define NAND_TIMING2_TWP_SHIFT (0) /* Bits 0-2: Write enable pulse width */
#define NAND_TIMING2_TWP_MASK (7 << NAND_TIMING2_TWP_SHIFT)
/* NandSetCmd register description (NandSetCmd, address 0x17000820) */
#define NAND_SETCMD_CV_SHIFT (0) /* Bits 0-15: Command value */
#define NAND_SETCMD_CV_MASK (0xffff << NAND_SETCMD_CV_SHIFT)
/* NandSetAddr register description (NandSetAddr, address 0x17000824) */
#define NAND_SETADDR_AV_SHIFT (0) /* Bits 0-15: Address value */
#define NAND_SETADDR_AV_MASK (0xffff << NAND_SETADDR_AV_SHIFT)
/* NandWriteData register description (NandWriteData, address 0x17000828) */
#define NAND_WRITEDATA_WV_SHIFT (0) /* Bits 0-15: Write value */
#define NAND_WRITEDATA_WV_MASK (0xffff << NAND_SETADDR_AV_SHIFT)
/* NandSetCE register description (NandSetCE, address 0x1700082c) */
#define NAND_SETCE_WP (1 << 4) /* Bit 4: WP_n pin value */
#define NAND_SETCE_CEV_MASK (0x0f)
#define NAND_SETCE_CE1N (1 << 3) /* Bit 3: Chip select CE1_n value */
#define NAND_SETCE_CE2N (1 << 2) /* Bit 2: Chip select CE2_n value */
#define NAND_SETCE_CE3N (1 << 1) /* Bit 1: Chip select CE3_n value */
#define NAND_SETCE_CE4N (1 << 0) /* Bit 0: Chip select CE4_n value */
/* NandReadData register description (NandReadData, address 0x17000830) */
#define NAND_READDATA_RV_SHIFT (0) /* Bits 0-15: Read value */
#define NAND_READDATA_RV_MASK (0xffff << NAND_READDATA_RV_SHIFT)
/* NandCheckSTS register description (NandCheckSTS, address 0x17000834) */
#define NAND_CHECKSTS_R3R (1 << 8) /* Bit 8: mNAND_RYBN3 rising edge */
#define NAND_CHECKSTS_R2R (1 << 7) /* Bit 7: mNAND_RYBN2 rising edge */
#define NAND_CHECKSTS_R1R (1 << 6) /* Bit 6: mNAND_RYBN1 rising edge */
#define NAND_CHECKSTS_R0R (1 << 5) /* Bit 5: mNAND_RYBN0 rising edge */
#define NAND_CHECKSTS_R3 (1 << 4) /* Bit 4: mNAND_RYBN3 value */
#define NAND_CHECKSTS_R2 (1 << 3) /* Bit 3: mNAND_RYBN2 value */
#define NAND_CHECKSTS_R1 (1 << 2) /* Bit 2: mNAND_RYBN1 value */
#define NAND_CHECKSTS_R0 (1 << 1) /* Bit 1: mNAND_RYBN0 value */
#define NAND_CHECKSTS_VB (1 << 0) /* Bit 0: APB busy */
/* NandControlFlow register description (NandControlFlow, address 0x17000838) */
#define NAND_CONTROLFLOW_W1 (1 << 5) /* Bit 5: Starts write SRAM1 to NAND */
#define NAND_CONTROLFLOW_W0 (1 << 4) /* Bit 4: Starts write SRAM0 to NAND */
#define NAND_CONTROLFLOW_R1 (1 << 1) /* Bit 1: Starts read from NAND to SRAM1 */
#define NAND_CONTROLFLOW_R0 (1 << 0) /* Bit 0: Starts read from NAND to SRAM0 */
/* NandGPIO1 register description (NandGPIO1, address 0x17000840) */
#define NAND_GPIO1_GPIOCONF (1 << 26) /* Bit 26: GPIO mode */
#define NAND_GPIO1_WPN (1 << 25) /* Bit 25: Value on WP_n */
#define NAND_GPIO1_CLE (1 << 24) /* Bit 24: Value on CLE */
#define NAND_GPIO1_ALE (1 << 23) /* Bit 23: Value on ALE */
#define NAND_GPIO1_REN (1 << 22) /* Bit 22: Value on RE_n */
#define NAND_GPIO1_WEN (1 << 21) /* Bit 21: Value on WE_n */
#define NAND_GPIO1_CE4N (1 << 20) /* Bit 20: Value on NAND_NCS_3 */
#define NAND_GPIO1_CE3N (1 << 19) /* Bit 19: Value on NAND_NCS_2 */
#define NAND_GPIO1_CE2N (1 << 18) /* Bit 18: Value on NAND_NCS_1 */
#define NAND_GPIO1_CE1N (1 << 17) /* Bit 17: Value on NAND_NCS_0 */
#define NAND_GPIO1_IODRIVE (1 << 16) /* Bit 16: Program value on NAND IO drive */
#define NAND_GPIO1_IODATA_SHIFT (0) /* Bit 0-15: Program value on data to NAND IO */
#define NAND_GPIO1_IODATA_MASK (0xffff << NAND_GPIO1_IODATA_SHIFT)
/* NandGPIO2 register description (NandGPIO2, address 0x17000844) */
#define NAND_GPIO2_RnB3 (1 << 19) /* Bit 19: Read value from mNAND_RYBN3 */
#define NAND_GPIO2_RnB2 (1 << 18) /* Bit 18: Read value from mNAND_RYBN2 */
#define NAND_GPIO2_RnB1 (1 << 17) /* Bit 17: Read value from mNAND_RYBN1 */
#define NAND_GPIO2_RnB0 (1 << 16) /* Bit 16: Read value from mNAND_RYBN0 */
#define NAND_GPIO2_READDATA_SHIFT (0) /* Bit 0-15: Read data from NAND IO */
#define NAND_GPIO2_READDATA_MASK (0xffff << NAND_GPIO2_READDATA_SHIFT)
/* NandIRQStatus2 register description (NandIRQStatus2, address 0x1700 0848) */
#define NAND_IRQSTATUS2_PGWHILEAPB (1 << 4) /* Bit 4: Page access while APB access */
#define NAND_IRQSTATUS2_APBWHILEPG (1 << 3) /* Bit 3: APB access while page access */
#define NAND_IRQSTATUS2_FLASHBUSY (1 << 2) /* Bit 2: Flash access while busy */
#define NAND_IRQSTATUS2_RAM1BUSY (1 << 1) /* Bit 1: RAM1 access while busy */
#define NAND_IRQSTATUS2_RAM0BUSY (1 << 0) /* Bit 0: RAM0 access while busy */
/* NandIRQMask2 register description (NandIRQMask2, address 0x1700 084C) */
#define NAND_IRQMASK2_PGWHILEAPB (1 << 4) /* Bit 4: Page access while APB access */
#define NAND_IRQMASK2_APBWHILEPG (1 << 3) /* Bit 3: APB access while page access */
#define NAND_IRQMASK2_FLASHBUSY (1 << 2) /* Bit 2: Flash access while busy */
#define NAND_IRQMASK2_RAM1BUSY (1 << 1) /* Bit 1: RAM1 access while busy */
#define NAND_IRQMASK2_RAM0BUSY (1 << 0) /* Bit 0: RAM0 access while busy */
/* NandIRQStatusRaw2 register description (NandIRQStatusRaw2, address 0x1700 0850) */
#define NAND_IRQSTATUSRAW2_PGWHILEAPB (1 << 4) /* Bit 4: Page access while APB access */
#define NAND_IRQSTATUSRAW2_APBWHILEPG (1 << 3) /* Bit 3: APB access while page access */
#define NAND_IRQSTATUSRAW2_FLASHBUSY (1 << 2) /* Bit 2: Flash access while busy */
#define NAND_IRQSTATUSRAW2_RAM1BUSY (1 << 1) /* Bit 1: RAM1 access while busy */
#define NAND_IRQSTATUSRAW2_RAM0BUSY (1 << 0) /* Bit 0: RAM0 access while busy */
/* NandECCErrStatus register description (NandECCErrStatus, address 0x1700 0878) */
#define NAND_ECCERRSTATUS_NERR1_SHIFT (4) /* Bits 4-7: Number of errors in RAM1 */
#define NAND_ECCERRSTATUS_NERR1_MASK (0x0f << NAND_ECCERRSTATUS_NERR1_SHIFT)
#define NAND_ECCERRSTATUS_NERR0_SHIFT (0) /* Bits 0-3: Number of errors in RAM0 */
#define NAND_ECCERRSTATUS_NERR0_MASK (0x0f << NAND_ECCERRSTATUS_NERR0_SHIFT)
/************************************************************************************************
* Public Types
************************************************************************************************/
/************************************************************************************************
* Public Data
************************************************************************************************/
/************************************************************************************************
* Public Functions
************************************************************************************************/
#endif /* __ARCH_ARM_SRC_LPC313X_NAND_H */