More progress on the Wildfire STM32 port
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5121 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
db93df1963
commit
6d900ffa25
@ -132,13 +132,13 @@ config ARCH_BOARD_EZ80F910200ZCO
|
||||
|
||||
config ARCH_BOARD_FIRE_STM32V2
|
||||
bool "M3 Wildfire STM32v2 board"
|
||||
depends on ARCH_CHIP_STM32F103VET
|
||||
depends on ARCH_CHIP_STM32F103VET6
|
||||
select ARCH_HAVE_LEDS
|
||||
select ARCH_HAVE_BUTTONS
|
||||
select ARCH_HAVE_IRQBUTTONS
|
||||
---help---
|
||||
A configuration for the M3 Wildfile board. This board is based on the
|
||||
STM32F103VET chip.
|
||||
STM32F103VET6 chip.
|
||||
|
||||
config ARCH_BOARD_HYMINI_STM32V
|
||||
bool "HY-Mini STM32v board"
|
||||
|
||||
@ -1545,7 +1545,7 @@ configs/ez80f0910200zco
|
||||
|
||||
configs/fire-stm32v2
|
||||
A configuration for the M3 Wildfire STM32 board. This board is based on the
|
||||
STM32F103VET chip.
|
||||
STM32F103VET6 chip.
|
||||
|
||||
configs/hymini-stm32v
|
||||
A configuration for the HY-Mini STM32v board. This board is based on the
|
||||
|
||||
@ -2,7 +2,7 @@ README
|
||||
======
|
||||
|
||||
This README discusses issues unique to NuttX configurations for the M3
|
||||
Wildfire development board (STM32F103VET).
|
||||
Wildfire development board (STM32F103VET6).
|
||||
|
||||
Contents
|
||||
========
|
||||
@ -48,7 +48,7 @@ PIN NAME SIGNAL NOTES
|
||||
21 VREF+ 3V3
|
||||
22 VDDA 3V3
|
||||
23 PA0 PA0-C-VSYNC Camera (P9)
|
||||
24 PA1 PC1/ADC123-IN11
|
||||
24 PA1 PC1/ADC123-IN1
|
||||
25 PA2 PA2-US2-TX MAX3232, DB9 D7
|
||||
|
||||
--- ------ -------------- -------------------------------------------------------------------
|
||||
@ -163,31 +163,36 @@ Development Environment
|
||||
GNU Toolchain Options
|
||||
=====================
|
||||
|
||||
Toolchain Configurations
|
||||
------------------------
|
||||
The NuttX make system has been modified to support the following different
|
||||
toolchain options.
|
||||
|
||||
1. The CodeSourcery GNU toolchain,
|
||||
2. The devkitARM GNU toolchain,
|
||||
3. Raisonance GNU toolchain, or
|
||||
4. The NuttX buildroot Toolchain (see below).
|
||||
2. The Atollic Toolchain,
|
||||
3. The devkitARM GNU toolchain,
|
||||
4. Raisonance GNU toolchain, or
|
||||
5. The NuttX buildroot Toolchain (see below).
|
||||
|
||||
All testing has been conducted using the NuttX buildroot toolchain. However,
|
||||
the make system is setup to default to use the devkitARM toolchain. To use
|
||||
the CodeSourcery, devkitARM or Raisonance GNU toolchain, you simply need to
|
||||
Most testing has been conducted using the CodeSourcery toolchain for Windows and
|
||||
that is the default toolchain in most configurations. To use the Atollic,
|
||||
devkitARM, Raisonance GNU, or NuttX buildroot toolchain, you simply need to
|
||||
add one of the following configuration options to your .config (or defconfig)
|
||||
file:
|
||||
|
||||
CONFIG_STM32_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_STM32_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_STM32_ATOLLIC_LITE=y : The free, "Lite" version of Atollic toolchain under Windows
|
||||
CONFIG_STM32_ATOLLIC_PRO=y : The paid, "Pro" version of Atollic toolchain under Windows
|
||||
CONFIG_STM32_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_STM32_RAISONANCE=y : Raisonance RIDE7 under Windows
|
||||
CONFIG_STM32_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
|
||||
If you are not using CONFIG_STM32_BUILDROOT, then you may also have to modify
|
||||
the PATH in the setenv.h file if your make cannot find the tools.
|
||||
If you change the default toolchain, then you may also have to modify the PATH in
|
||||
the setenv.h file if your make cannot find the tools.
|
||||
|
||||
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
|
||||
Windows native toolchains. The CodeSourcey (for Linux) and NuttX buildroot
|
||||
NOTE: the CodeSourcery (for Windows), Atollic, devkitARM, and Raisonance toolchains are
|
||||
Windows native toolchains. The CodeSourcery (for Linux) and NuttX buildroot
|
||||
toolchains are Cygwin and/or Linux native toolchains. There are several limitations
|
||||
to using a Windows based toolchain in a Cygwin environment. The three biggest are:
|
||||
|
||||
@ -221,11 +226,45 @@ GNU Toolchain Options
|
||||
If you have problems with the dependency build (for example, if you are not
|
||||
building on C:), then you may need to modify tools/mkdeps.sh
|
||||
|
||||
NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
|
||||
The CodeSourcery Toolchain (2009q1)
|
||||
-----------------------------------
|
||||
The CodeSourcery toolchain (2009q1) does not work with default optimization
|
||||
level of -Os (See Make.defs). It will work with -O0, -O1, or -O2, but not with
|
||||
-Os.
|
||||
|
||||
NOTE 2: The devkitARM toolchain includes a version of MSYS make. Make sure that
|
||||
The Atollic "Pro" and "Lite" Toolchain
|
||||
--------------------------------------
|
||||
One problem that I had with the Atollic toolchains is that the provide a gcc.exe
|
||||
and g++.exe in the same bin/ file as their ARM binaries. If the Atollic bin/ path
|
||||
appears in your PATH variable before /usr/bin, then you will get the wrong gcc
|
||||
when you try to build host executables. This will cause to strange, uninterpretable
|
||||
errors build some host binaries in tools/ when you first make.
|
||||
|
||||
The Atollic "Lite" Toolchain
|
||||
----------------------------
|
||||
The free, "Lite" version of the Atollic toolchain does not support C++ nor
|
||||
does it support ar, nm, objdump, or objdcopy. If you use the Atollic "Lite"
|
||||
toolchain, you will have to set:
|
||||
|
||||
CONFIG_HAVE_CXX=n
|
||||
|
||||
In order to compile successfully. Otherwise, you will get errors like:
|
||||
|
||||
"C++ Compiler only available in TrueSTUDIO Professional"
|
||||
|
||||
The make may then fail in some of the post link processing because of some of
|
||||
the other missing tools. The Make.defs file replaces the ar and nm with
|
||||
the default system x86 tool versions and these seem to work okay. Disable all
|
||||
of the following to avoid using objcopy:
|
||||
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=n
|
||||
CONFIG_MOTOROLA_SREC=n
|
||||
CONFIG_RAW_BINARY=n
|
||||
|
||||
devkitARM
|
||||
---------
|
||||
The devkitARM toolchain includes a version of MSYS make. Make sure that the
|
||||
the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
|
||||
path or will get the wrong version of make.
|
||||
|
||||
@ -472,7 +511,7 @@ M3 Wildfire-specific Configuration Options
|
||||
chip:
|
||||
|
||||
CONFIG_ARCH_CHIP_STM32
|
||||
CONFIG_ARCH_CHIP_STM32F103ZET6
|
||||
CONFIG_ARCH_CHIP_STM32F103VET6
|
||||
|
||||
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG - Enables special STM32 clock
|
||||
configuration features.
|
||||
|
||||
@ -219,6 +219,14 @@
|
||||
* 46 PE15 PE15-FSMC_D12 2.4" TFT + Touchscreen
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) && defined(CONFIG_STM32_SPI1_REMAP)
|
||||
# error "SPI1 requires CONFIG_STM32_SPI1_REMAP=n"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32_I2C1) && defined(CONFIG_STM32_I2C1_REMAP)
|
||||
# error "SPI1 requires CONFIG_STM32_I2C1_REMAP=n"
|
||||
#endif
|
||||
|
||||
/* AT24C02
|
||||
*
|
||||
* --- ------ -------------- -------------------------------------------------------------------
|
||||
@ -229,6 +237,10 @@
|
||||
* 93 PB7 PB7-I2C1-SDA 2.4" TFT + Touchscreen, AT24C02
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_I2C1) && defined(CONFIG_STM32_I2C1_REMAP)
|
||||
# error "SPI1 requires CONFIG_STM32_I2C1_REMAP=n"
|
||||
#endif
|
||||
|
||||
/* Potentiometer/ADC
|
||||
*
|
||||
* --- ------ -------------- -------------------------------------------------------------------
|
||||
@ -236,7 +248,7 @@
|
||||
* --- ------ -------------- -------------------------------------------------------------------
|
||||
*
|
||||
* 16 PC1 PC1/ADC123-IN11 Potentiometer (R16)
|
||||
* 24 PA1 PC1/ADC123-IN11
|
||||
* 24 PA1 PC1/ADC123-IN1
|
||||
*/
|
||||
|
||||
/* USARTs
|
||||
@ -245,12 +257,20 @@
|
||||
* PIN NAME SIGNAL NOTES
|
||||
* --- ------ -------------- -------------------------------------------------------------------
|
||||
*
|
||||
* 25 PA2 PA2-US2-TX MAX3232, DB9 D7
|
||||
* 26 PA3 PA3-US2-RX MAX3232, DB9 D7
|
||||
* 68 PA9 PA9-US1-TX MAX3232, DB9 D8
|
||||
* 69 PA10 PA10-US1-RX MAX3232, DB9 D8
|
||||
* 68 PA9 PA9-US1-TX MAX3232, DB9 D8, Requires CONFIG_STM32_USART1_REMAP
|
||||
* 69 PA10 PA10-US1-RX MAX3232, DB9 D8, Requires CONFIG_STM32_USART1_REMAP
|
||||
* 25 PA2 PA2-US2-TX MAX3232, DB9 D7, Requires !CONFIG_STM32_USART2_REMAP
|
||||
* 26 PA3 PA3-US2-RX MAX3232, DB9 D7, Requires !CONFIG_STM32_USART2_REMAP
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_USART1) && !defined(CONFIG_STM32_USART1_REMAP)
|
||||
# errror "USART1 requires CONFIG_STM32_USART1_REMAP=y"
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_STM32_USART2) && defined()
|
||||
# errror "USART2 requires CONFIG_STM32_USART2_REMAP=n"
|
||||
#endif
|
||||
|
||||
/* ENC28J60
|
||||
*
|
||||
* --- ------ -------------- -------------------------------------------------------------------
|
||||
@ -260,6 +280,10 @@
|
||||
* 29 PA4 PA4-SPI1-NSS 10Mbit ENC28J60, SPI 2M FLASH
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_SPI1) && defined(CONFIG_STM32_SPI1_REMAP)
|
||||
# error "SPI1 requires CONFIG_STM32_SPI1_REMAP=n"
|
||||
#endif
|
||||
|
||||
/* MP3
|
||||
*
|
||||
* --- ------ -------------- -------------------------------------------------------------------
|
||||
@ -299,6 +323,10 @@
|
||||
* 96 PB9 PB9-CAN-TX CAN tranceiver, Header 2H
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_STM32_CAN1) && !defined(CONFIG_STM32_CAN1_REMAP1)
|
||||
# error "SPI1 requires CONFIG_STM32_CAN1_REMAP1=y"
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
196
configs/fire-stm32v2/nsh/Make.defs
Normal file
196
configs/fire-stm32v2/nsh/Make.defs
Normal file
@ -0,0 +1,196 @@
|
||||
############################################################################
|
||||
# configs/fire-stm32v2/nsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
|
||||
# Setup for the selected toolchain
|
||||
|
||||
ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
|
||||
# CodeSourcery under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
|
||||
# CodeSourcery under Linux
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCROSSDEV = arm-none-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_ATOLLIC_LITE),y)
|
||||
# Atollic toolchain under Windows
|
||||
CROSSDEV = arm-atollic-eabi-
|
||||
ARCROSSDEV =
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_ATOLLIC_PRO),y)
|
||||
# Atollic toolchain under Windows
|
||||
CROSSDEV = arm-atollic-eabi-
|
||||
ARCROSSDEV = arm-atollic-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_DEVKITARM),y)
|
||||
# devkitARM under Windows
|
||||
CROSSDEV = arm-eabi-
|
||||
ARCROSSDEV = arm-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_RAISONANCE),y)
|
||||
# Raisonance RIDE7 under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_STM32_BUILDROOT),y)
|
||||
# NuttX buildroot under Linux or Cygwin
|
||||
CROSSDEV = arm-elf-
|
||||
ARCROSSDEV = arm-elf-
|
||||
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -Os
|
||||
endif
|
||||
|
||||
# Pick the linker script
|
||||
|
||||
ifeq ($(CONFIG_STM32_DFU),y)
|
||||
LDSCRIPT = ld.script.dfu
|
||||
else
|
||||
LDSCRIPT = ld.script
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILEXX
|
||||
@echo "CXX: $1"
|
||||
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
78
configs/fire-stm32v2/nsh/setenv.sh
Executable file
78
configs/fire-stm32v2/nsh/setenv.sh
Executable file
@ -0,0 +1,78 @@
|
||||
#!/bin/bash
|
||||
# configs/fire-stm32v2/nsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This the Cygwin path to the location where I installed the RIDE
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the RIDE toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
|
||||
|
||||
# This the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# This is the path to the tools/ subdirectory
|
||||
export TOOLS_DIR="${WD}/configs/fire-stm32v2/tools"
|
||||
|
||||
# Add the path to the toolchain to the PATH variable
|
||||
export PATH="${TOOLCHAIN_BIN}:${TOOLS_DIR}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
112
configs/fire-stm32v2/scripts/ld.script
Normal file
112
configs/fire-stm32v2/scripts/ld.script
Normal file
@ -0,0 +1,112 @@
|
||||
/****************************************************************************
|
||||
* configs/fire-stm32v2/scripts/ld.script
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F103VET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 64Kb of SRAM beginning at address 0x2000:0000. When booting from FLASH,
|
||||
* FLASH memory is aliased to address 0x0000:0000 where the code expects to
|
||||
* begin execution by jumping to the entry point in the 0x0800:0000 address
|
||||
* range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08000000, LENGTH = 512K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
111
configs/fire-stm32v2/scripts/ld.script.dfu
Normal file
111
configs/fire-stm32v2/scripts/ld.script.dfu
Normal file
@ -0,0 +1,111 @@
|
||||
/****************************************************************************
|
||||
* configs/fire-stm32v2/scripts/ld.script.dfu
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The STM32F103VET6 has 512Kb of FLASH beginning at address 0x0800:0000 and
|
||||
* 64Kb of SRAM beginning at address 0x2000:0000. Here we assume that the
|
||||
* STM3210E-EVAL's DFU bootloader is being used. In that case, the corrct
|
||||
* load .text load address is 0x08003000 (leaving 464Kb).
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x08003000, LENGTH = 464K
|
||||
sram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.);
|
||||
|
||||
/* The STM32F103Z has 64Kb of SRAM beginning at the following address */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
.ARM.exidx : {
|
||||
*(.ARM.exidx*)
|
||||
} >sram
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
|
||||
.bss : {
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user