Add QSPI interface definition
This commit is contained in:
Gregory Nutt
parent
94ecf7ebad
commit
6dadfcbf6b
@ -10883,4 +10883,8 @@
|
||||
SaeHie Park (2015-08-25).
|
||||
* drivers/mtd/st25fl1.c: Add a driver for ST25L1*K QuadSPI parts
|
||||
(2015-08-15).
|
||||
* include/nuttx/spi/qspi.h: Develop a new interface for QSPI, at
|
||||
least the way that QSPI is implemented on the SAMV71. Originally
|
||||
planned to use the SPI interface, but it is just now compatible
|
||||
with the SAMV71 QSPI hardware (2015-08-15).
|
||||
|
||||
|
||||
2
arch
2
arch
@ -1 +1 @@
|
||||
Subproject commit 5336c646386607424e3426fb488d73241abb5f08
|
||||
Subproject commit 463d5c9af87cb0e749f7400ae1a1dfe0d56517fc
|
||||
257
include/nuttx/spi/qspi.h
Normal file
257
include/nuttx/spi/qspi.h
Normal file
@ -0,0 +1,257 @@
|
||||
/****************************************************************************
|
||||
* include/nuttx/qspi/qspi.h
|
||||
*
|
||||
* Copyright(C) 2015 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES(INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifndef __INCLUDE_NUTTX_QSPI_QSPI_H
|
||||
#define __INCLUDE_NUTTX_QSPI_QSPI_H
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************/
|
||||
/* Access macros ************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: QSPI_LOCK
|
||||
*
|
||||
* Description:
|
||||
* On QSPI busses where there are multiple devices, it will be necessary to
|
||||
* lock QSPI to have exclusive access to the busses for a sequence of
|
||||
* transfers. The bus should be locked before the chip is selected. After
|
||||
* locking the QSPI bus, the caller should then also call the setfrequency,
|
||||
* setbits, and setmode methods to make sure that the QSPI is properly
|
||||
* configured for the device. If the QSPI buss is being shared, then it
|
||||
* may have been left in an incompatible state.
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* lock - true: Lock qspi bus, false: unlock QSPI bus
|
||||
*
|
||||
* Returned Value:
|
||||
* None
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#define QSPI_LOCK(d,l) (d)->ops->lock(d,l)
|
||||
|
||||
/****************************************************************************
|
||||
* Name: QSPI_SETFREQUENCY
|
||||
*
|
||||
* Description:
|
||||
* Set the QSPI frequency. Required.
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* frequency - The QSPI frequency requested
|
||||
*
|
||||
* Returned Value:
|
||||
* Returns the actual frequency selected
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#define QSPI_SETFREQUENCY(d,f) ((d)->ops->setfrequency(d,f))
|
||||
|
||||
/****************************************************************************
|
||||
* Name: QSPI_SETMODE
|
||||
*
|
||||
* Description:
|
||||
* Set the QSPI mode. Optional. See enum qspi_mode_e for mode definitions.
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* mode - The QSPI mode requested
|
||||
*
|
||||
* Returned Value:
|
||||
* none
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#define QSPI_SETMODE(d,m) (d)->ops->setmode(d,m)
|
||||
|
||||
/****************************************************************************
|
||||
* Name: QSPI_SETBITS
|
||||
*
|
||||
* Description:
|
||||
* Set the number if bits per word.
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* nbits - The number of bits requests.
|
||||
* If value is greater > 0 then it implies MSB first
|
||||
* If value is below < 0, then it implies LSB first with -nbits
|
||||
*
|
||||
* Returned Value:
|
||||
* none
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#define QSPI_SETBITS(d,b) (d)->ops->setbits(d,b)
|
||||
|
||||
/****************************************************************************
|
||||
* Name: QSPI_COMMAND
|
||||
*
|
||||
* Description:
|
||||
* Send a command to the QSPI device
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* cmd - The command to send. the size of the data is determined by the
|
||||
* number of bits selected for the QSPI interface.
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) on SUCCESS, a negated errno on value of failure
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#define QSPI_COMMAND(d,c) ((d)->ops->command(d,(uint16_t)c))
|
||||
|
||||
/****************************************************************************
|
||||
* Name: QSPI_COMMAND_WRITE
|
||||
*
|
||||
* Description:
|
||||
* Send a command then send a block of data.
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* cmd - The command to send. the size of the data is determined by
|
||||
* the number of bits selected for the QSPI interface.
|
||||
* buffer - A pointer to the buffer of data to be sent
|
||||
* buflen - the length of data to send from the buffer in number of words.
|
||||
* The wordsize is determined by the number of bits-per-word
|
||||
* selected for the QSPI interface. If nbits <= 8, the data is
|
||||
* packed into uint8_t's; if nbits >8, the data is packed into
|
||||
* uint16_t's
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) on SUCCESS, a negated errno on value of failure
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#define QSPI_COMMAND_WRITE(d,c,b,l) ((d)->ops->command_write(d,c,b,l))
|
||||
|
||||
/****************************************************************************
|
||||
* Name: QSPI_COMMAND_READ
|
||||
*
|
||||
* Description:
|
||||
* Receive a block of data from QSPI. Required.
|
||||
*
|
||||
* Input Parameters:
|
||||
* dev - Device-specific state data
|
||||
* cmd - The command to send. the size of the data is determined by
|
||||
* the number of bits selected for the QSPI interface.
|
||||
* buffer - A pointer to the buffer in which to receive data
|
||||
* buflen - the length of data that can be received in the buffer in number
|
||||
* of words. The wordsize is determined by the number of bits-
|
||||
* per-word selected for the QSPI interface. If nbits <= 8, the
|
||||
* data is packed into uint8_t's; if nbits >8, the data is packed
|
||||
* into uint16_t's
|
||||
*
|
||||
* Returned Value:
|
||||
* Zero (OK) on SUCCESS, a negated errno on value of failure
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#define QSPI_COMMAND_READ(d,c,b,l) ((d)->ops->command_read(d,c,b,l))
|
||||
|
||||
/****************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************/
|
||||
|
||||
/* Certain QSPI devices may required different clocking modes */
|
||||
|
||||
enum qspi_mode_e
|
||||
{
|
||||
QSPIDEV_MODE0 = 0, /* CPOL=0 CHPHA=0 */
|
||||
QSPIDEV_MODE1, /* CPOL=0 CHPHA=1 */
|
||||
QSPIDEV_MODE2, /* CPOL=1 CHPHA=0 */
|
||||
QSPIDEV_MODE3 /* CPOL=1 CHPHA=1 */
|
||||
};
|
||||
|
||||
/* The QSPI vtable */
|
||||
|
||||
struct qspi_dev_s;
|
||||
struct qspi_ops_s
|
||||
{
|
||||
CODE int (*lock)(FAR struct qspi_dev_s *dev, bool lock);
|
||||
CODE uint32_t (*setfrequency)(FAR struct qspi_dev_s *dev, uint32_t frequency);
|
||||
CODE void (*setmode)(FAR struct qspi_dev_s *dev, enum qspi_mode_e mode);
|
||||
CODE void (*setbits)(FAR struct qspi_dev_s *dev, int nbits);
|
||||
CODE int (*command)(FAR struct qspi_dev_s *dev, uint16_t command);
|
||||
CODE int (*command_write)(FAR struct qspi_dev_s *dev, uint16_t cmd,
|
||||
FAR const void *buffer, size_t buflen);
|
||||
CODE int (*command_read)(FAR struct qspi_dev_s *dev, uint16_t cmd,
|
||||
FAR void *buffer, size_t buflen);
|
||||
};
|
||||
|
||||
/* QSPI private data. This structure only defines the initial fields of the
|
||||
* structure visible to the QSPI client. The specific implementation may
|
||||
* add additional, device specific fields
|
||||
*/
|
||||
|
||||
struct qspi_dev_s
|
||||
{
|
||||
FAR const struct qspi_ops_s *ops;
|
||||
};
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C"
|
||||
{
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
#endif /* __INCLUDE_NUTTX_QSPI_QSPI_H */
|
||||
Loading…
Reference in New Issue
Block a user